Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D24579392
Pulled By: riversand963
fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D24485420
Pulled By: zhichao-cao
fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
Summary:
We just used a hacky way to fix db_basic_test: suppress status code in ~BlockBasedTableBuilder. Rather, we should pass them back in Finish() and suppress them in Abandon().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7507
Test Plan: Watch existing tests to succeed.
Reviewed By: riversand963
Differential Revision: D24119527
fbshipit-source-id: 71c4d4a81c0fd1c5595224692275f20f7759973a
Summary:
This PR addresses some build and functional issues on MSVC targets, as a step towards an eventual goal of having RocksDB build successfully for Windows on ARM64.
Addressed issues include:
- BitsSetToOne and CountTrailingZeroBits do not compile on non-x64 MSVC targets. A fallback implementation of BitsSetToOne when Intel intrinsics are not available is added, based on the C++20 `<bit>` popcount implementation in Microsoft's STL.
- The implementation of FloorLog2 for MSVC targets (including x64) gives incorrect results. The unit test easily detects this, but CircleCI is currently configured to only run a specific set of tests for Windows CMake builds, so this seems to have been unnoticed.
- AsmVolatilePause does not use YieldProcessor on Windows ARM64 targets, even though it is available.
- When CondVar::TimedWait calls Microsoft STL's condition_variable::wait_for, it can potentially trigger a bug (just recently fixed in the upcoming VS 16.8's STL) that deadlocks various tests that wait for a timer to execute, since `Timer::Run` doesn't get a chance to execute before being blocked by the test function acquiring the mutex.
- In c_test, `GetTempDir` assumes a POSIX-style temp path.
- `NormalizePath` did not eliminate consecutive POSIX-style path separators on Windows, resulting in test failures in e.g., wal_manager_test.
- Various other test failures.
In a followup PR I hope to modify CircleCI's config.yml to invoke all RocksDB unit tests in Windows CMake builds with CTest, instead of the current use of `run_ci_db_test.ps1` which requires individual tests to be specified and is missing many of the existing tests.
Notes from peterd: FloorLog2 is not yet used in production code (it's for something in progress). I also added a few more inexpensive platform-dependent tests to Windows CircleCI runs. And included facebook/folly#1461 as requested
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7439
Reviewed By: jay-zhuang
Differential Revision: D24021563
Pulled By: pdillinger
fbshipit-source-id: 0ec2027c0d6a494d8a0fe38d9667fc2f7e29f7e7
Summary:
The patch extends `FindObsoleteFiles` and `PurgeObsoleteFiles` with
support for blob files. The behavior is analogous to SST files: obsolete
blob files are put on the "candidates for deletion" list, while live (and pending)
files are preserved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6807
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21406249
Pulled By: ltamasi
fbshipit-source-id: 1948f71c31927564b61e8af394f50ca3964880d9
Summary:
When creating a database backup, the background threads will not only consume IO resources by copying files, but also consuming CPU such as by computing checksums. During peak times, the CPU consumption by the background threads might affect online queries.
This PR makes it possible to decrease CPU priority of these threads when creating a new backup.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6602
Test Plan: make check
Reviewed By: siying, zhichao-cao
Differential Revision: D20683216
Pulled By: cheng-chang
fbshipit-source-id: 9978b9ed9488e8ce135e90ca083e5b4b7221fd84
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.
Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334
Reviewed By: anand1976
Differential Revision: D19778960
Pulled By: riversand963
fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
Summary:
In the current code base, we can use Directory from Env to manage directory (e.g, Fsync()). The PR https://github.com/facebook/rocksdb/issues/5761 introduce the File System as a new Env API. So we further replace the Directory class in DB with FSDirectory such that we can have more IO information from IOStatus returned by FSDirectory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6468
Test Plan: pass make asan_check
Differential Revision: D20195261
Pulled By: zhichao-cao
fbshipit-source-id: 93962cb9436852bfcfb76e086d9e7babd461cbe1
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725
Test Plan: Added unit tests.
Differential Revision: D16963840
Pulled By: vjnadimpalli
fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
Currently in `DBImpl::PurgeObsoleteFiles`, the list of candidate files is create through a combination of calling LogFileName using `log_delete_files` and `full_scan_candidate_files`.
In full_scan_candidate_files, the filenames look like this
{file_name = "074715.log", file_path = "/txlogs/3306"},
but LogFileName produces filenames like this that prepends a slash:
{file_name = "/074715.log", file_path = "/txlogs/3306"},
This confuses the dedup step here: bb4178066d/db/db_impl/db_impl_files.cc (L339-L345)
Because duplicates still exist, DeleteFile is called on the same file twice, and hits an error on the second try. Error message: Failed to mark /txlogs/3302/764418.log as trash.
The root cause is the use of `kDumbDbName` when generating file names, it creates file names like /074715.log. This PR removes the use of `kDumbDbName` and create paths without leading '/' when dbname can be ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5603
Test Plan: make check
Differential Revision: D16413203
Pulled By: miasantreble
fbshipit-source-id: 6ba8288382c55f7d5e3892d722fc94b57d2e4491
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
Clang analyzer is reporting a false positive warning thinking `type` is uninitialized. The variable is initialized by `ParseFileName` by reference so assigning a default value to keep clang happy.
Current failure:
```
file/filename.cc:435:15: warning: The left operand of '==' is a garbage value
(type == kInfoLogFile)) {
~~~~ ^
1 warning generated.
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5398
Differential Revision: D15588421
Pulled By: miasantreble
fbshipit-source-id: fb121c270300f3a659e68bc7f6674ff4ddf2df9a
Summary:
Right now, with auto roll logger, options.keep_log_file_num enforcement is triggered by events like DB reopen or full obsolete scan happens. In the mean time, the size and number of log files can grow without a limit. We put a stronger enforcement to the option, so that the number of log files can always under control.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5370
Differential Revision: D15570413
Pulled By: siying
fbshipit-source-id: 0916c3c4d42ab8fdd29389ee7fd7e1557b03176e
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
