Summary:
This diff adds support for both soft and hard rate limiting. The following changes are included:
1) Options.rate_limit is renamed to Options.hard_rate_limit.
2) Options.rate_limit_delay_milliseconds is renamed to Options.rate_limit_delay_max_milliseconds.
3) Options.soft_rate_limit is added.
4) If the maximum compaction score is > hard_rate_limit and rate_limit_delay_max_milliseconds == 0, then writes are delayed by 1 ms at a time until the max compaction score falls below hard_rate_limit.
5) If the max compaction score is > soft_rate_limit but <= hard_rate_limit, then writes are delayed by 0-1 ms depending on how close we are to hard_rate_limit.
6) Users can disable 4 by setting hard_rate_limit = 0. They can add a limit to the maximum amount of time waited by setting rate_limit_delay_max_milliseconds > 0. Thus, the old behavior can be preserved by setting soft_rate_limit = 0, which is the default.
Test Plan:
make -j32 check
./db_stress
Reviewers: dhruba, haobo, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12003
Summary: TTL uses compaction filter to purge key-values and required the user to not pass one. This diff makes it accommodating of user's compaciton filter. Added test to ttl_test
Test Plan: make; ./ttl_test
Reviewers: dhruba, haobo, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11973
Summary: did a find-replace
Test Plan: make
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11979
Summary: Implemented a TtlMergeOperator class which inherits from MergeOperator and is TTL aware. It strips out timestamp from existing_value and attaches timestamp to new_value, calling user-provided-Merge in between.
Test Plan: make all check
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11775
Summary: Removed KeyMayExistImpl because KeyMayExist demanded Get like semantics now. Removed no_io from memtable and imm because we need the proper value now and shouldn't just stop when we see Merge in memtable. Added checks to block_cache. Updated documentation and unit-test
Test Plan: make all check;db_stress for 1 hour
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11853
Summary:
Currently, when a certain number of level0 files (level0_slowdown_writes_trigger) are present, RocksDB will slow down each write by 1ms. There is a second limit of level0 files at which RocksDB will stop writes altogether (level0_stop_writes_trigger).
This patch enables the user to supply a third parameter specifying the number of files at which Rocks will start slowing down writes (level0_start_slowdown_writes). When this number is reached, Rocks will slow down writes as a quadratic function of level0_slowdown_writes_trigger - num_level0_files.
For some workloads, this improves latency and throughput. I will post some stats momentarily in https://our.intern.facebook.com/intern/tasks/?t=2613384.
Test Plan:
make -j32 check
./db_stress
./db_bench
Reviewers: dhruba, haobo, MarkCallaghan, xjin
Reviewed By: xjin
CC: leveldb, xjin, zshao
Differential Revision: https://reviews.facebook.net/D11859
Summary:
Add an option for arena block size, default value 4096 bytes. Arena will allocate blocks with such size.
I am not sure about passing parameter to skiplist in the new virtualized framework, though I talked to Jim a bit. So add Jim as reviewer.
Test Plan:
new unit test, I am running db_test.
For passing paramter from configured option to Arena, I tried tests like:
TEST(DBTest, Arena_Option) {
std::string dbname = test::TmpDir() + "/db_arena_option_test";
DestroyDB(dbname, Options());
DB* db = nullptr;
Options opts;
opts.create_if_missing = true;
opts.arena_block_size = 1000000; // tested 99, 999999
Status s = DB::Open(opts, dbname, &db);
db->Put(WriteOptions(), "a", "123");
}
and printed some debug info. The results look good. Any suggestion for such a unit-test?
Reviewers: haobo, dhruba, emayanke, jpaton
Reviewed By: dhruba
CC: leveldb, zshao
Differential Revision: https://reviews.facebook.net/D11799
Summary: After my patch for stall histograms, there are redundant calls to NowMicros() by both the stop watches and DBImpl::MakeRoomForWrites. So I removed the redundant calls such that the information is gotten from the stopwatch.
Test Plan:
make clean
make -j32 check
Reviewers: dhruba, haobo, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11883
Summary: Currently, merge_test uses /tmp/testdb for the test database. It should really use something more specific to merge_test. Most of the other tests use test::TmpDir() + "/<test name>db". This patch implements such behavior for merge_test; it makes merge_test use test::TmpDir() + "/merge_testdb"
Test Plan:
make clean
make -j32 merge_test
./merge_test
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11877
Summary: Previously, statistics are kept on how much time is spent on stalls of different types. This patch adds support for keeping number of stalls of each type. For example, instead of just reporting how many microseconds are spent waiting for memtables to be compacted, it will also report how many times a write stalled for that to occur.
Test Plan:
make -j32 check
./db_stress
# Not really sure what else should be done...
Reviewers: dhruba, MarkCallaghan, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11841
Summary:
Revert "If disable wal is set, then batch commits are avoided" because
keeping the mutex while inserting into the skiplist means that readers
and writes are all serialized on the mutex.
Test Plan:
Reviewers:
CC:
Task ID: #
Blame Rev:
Summary: This diff virtualizes the skiplist interface so that users can provide their own implementation of a backing store for MemTables. Eventually, the backing store will be responsible for its own synchronization, allowing users (and us) to experiment with different lockless implementations.
Test Plan:
make clean
make -j32 check
./db_stress
Reviewers: dhruba, emayanke, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11739
Summary:
rocksdb uses batch commit to write to transaction log. But if
disable wal is set, then writes to transaction log are anyways
avoided. In this case, there is not much value-add to batch things,
batching can cause unnecessary delays to Puts().
This patch avoids batching when disableWal is set.
Test Plan:
make check.
I am running db_stress now.
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11763
Summary: filter_deletes options introduced in db_stress makes it drop Deletes on key if KeyMayExist(key) returns false on the key. code change was simple and tested so not wasting reviewer's time.
Test Plan: maek crash_test; python tools/db_crashtest[1|2].py
CC: dhruba, vamsi
Differential Revision: https://reviews.facebook.net/D11769
Summary:
Introduced KeyMayExist checking during writebatch-delete and removed from Outer Delete API because it uses writebatch-delete.
Added code to skip getting Table from disk if not already present in table_cache.
Some renaming of variables.
Introduced KeyMayExistImpl which allows checking since specified sequence number in GetImpl useful to check partially written writebatch.
Changed KeyMayExist to not be pure virtual and provided a default implementation.
Expanded unit-tests in db_test to check appropriately.
Ran db_stress for 1 hour with ./db_stress --max_key=100000 --ops_per_thread=10000000 --delpercent=50 --filter_deletes=1 --statistics=1.
Test Plan: db_stress;make check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb, xjin
Differential Revision: https://reviews.facebook.net/D11745
Summary: As title. This diff added an option reduce_level to CompactRange. When set to true, it will try to move the files back to the minimum level sufficient to hold the data set. Note that the default is set to true now, just to excerise it in all existing tests. Will set the default to false before check-in, for backward compatibility.
Test Plan: make check;
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11553
Summary: NewBloomFilterPolicy call requires Delete to be called later on
Test Plan: make; valgrind ./db_test
Reviewers: haobo, dhruba, vamsi
Differential Revision: https://reviews.facebook.net/D11667
Summary:
Wrote a new function in db_impl.c-CheckKeyMayExist that calls Get but with a new parameter turned on which makes Get return false only if bloom filters can guarantee that key is not in database. Delete calls this function and if the option- deletes_use_filter is turned on and CheckKeyMayExist returns false, the delete will be dropped saving:
1. Put of delete type
2. Space in the db,and
3. Compaction time
Test Plan:
make all check;
will run db_stress and db_bench and enhance unit-test once the basic design gets approved
Reviewers: dhruba, haobo, vamsi
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11607
Summary:
This diff is more about my question when reading compaction codes,
instead of a normal diff. I don't quite understand the logic here.
Test Plan: I didn't do any test. If this is a bug, I will continue doing some test.
Reviewers: haobo, dhruba, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11661
Summary: db_stress should alos print complete statistics like db_bench. Needed this when I wanted to measure number of delete-IOs dropped due to CheckKeyMayExist to be introduced to rocksdb codebase later- to make deltes in rocksdb faster
Test Plan: make db_stress;./db_stress --max_key=100 --ops_per_thread=1000 --statistics=1
Reviewers: sheki, dhruba, vamsi, haobo
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D11655
Summary: Replication logic would be simplifeid if we can guarantee that write sequence number is always contiguous, even if write failure occurs. Dhruba and I looked at the sequence number generation part of the code. It seems fixable. Note that if WAL was successful and insert into memtable was not, we would be in an unfortunate state. The approach in this diff is : IO error is expected and error status will be returned to client, sequence number will not be advanced; In-mem error is not expected and we panic.
Test Plan: make check; db_stress
Reviewers: dhruba, sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11439
Summary: This diff added a command 'idump' to ldb tool, which dumps the internal key/value pairs. It could be useful for diagnosis and estimating the per user key 'overhead'. Also cleaned up the ldb code a bit where I touched.
Test Plan: make check; ldb idump
Reviewers: emayanke, sheki, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11517
Summary: rocksdb-2.0 released to third party
Test Plan: visual inspection
Reviewers: dhruba, haobo, sheki
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11559
Summary: As title. Exposed a Count function that returns the number of updates in a batch. Could be handy for replication sequence number check.
Test Plan: make check;
Reviewers: emayanke, sheki, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11523
Summary:
With the Makefile now updated to correctly update all .o files, this
should fix the issues recompiling stringappend_test. This should also fix the
"segmentation-fault" that we were getting earlier. Now, stringappend_test should
be clean, and I have added it back to the unit-tests. Also made some minor updates
to the tests themselves.
Test Plan:
1. make clean; make stringappend_test -j 32 (will test it by itself)
2. make clean; make all check -j 32 (to run all unit tests)
3. make clean; make release (test in release mode)
4. valgrind ./stringappend_test (valgrind tests)
Reviewers: haobo, jpaton, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11505
Summary:
The old Makefile did not remove ALL .o and .d files, but rather only
those that happened to be in the root folder and one-level deep. This was causing
issues when recompiling files in deeper folders. This fix now causes make clean
to find ALL .o and .d files via a unix "find" command, and then remove them.
Test Plan:
make clean;
make all -j 32;
Reviewers: haobo, jpaton, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11493
Summary: [start_time, end_time) is waht I'm following for the buckets and the whole time-range. Also cleaned up some code in db_ttl.* Not correcting the spacing/indenting convention for util/ldb_cmd.cc in this diff.
Test Plan: python ldb_test.py, make ttl_test, Run mcrocksdb-backup tool, Run the ldb tool on 2 mcrocksdb production backups form sigmafio033.prn1
Reviewers: vamsi, haobo
Reviewed By: vamsi
Differential Revision: https://reviews.facebook.net/D11433
Summary:
Scan and Dump commands in ldb use iterator. We need to also print timestamp for ttl databases for debugging. For this I create a TtlIterator class pointer in these functions and assign it the value of Iterator pointer which actually points to t TtlIterator object, and access the new function ValueWithTS which can return TS also. Buckets feature for dump command: gives a count of different key-values in the specified time-range distributed across the time-range partitioned according to bucket-size. start_time and end_time are specified in unixtimestamp and bucket in seconds on the user-commandline
Have commented out 3 ines from ldb_test.py so that the test does not break right now. It breaks because timestamp is also printed now and I have to look at wildcards in python to compare properly.
Test Plan: python tools/ldb_test.py
Reviewers: vamsi, dhruba, haobo, sheki
Reviewed By: vamsi
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11403
Summary: As title, now that db_stress supports --map_read properly
Test Plan: make crash_test
Reviewers: vamsi, emayanke, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11391
Summary: as title, use initialize list so that lines fit in 80 chars.
Test Plan: make check;
Reviewers: sheki, dhruba
Differential Revision: https://reviews.facebook.net/D11385
Summary: as title, also removed an incorrect assertion
Test Plan: make check; db_stress --mmap_read=1; db_stress --mmap_read=0
Reviewers: dhruba, emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11367
Summary:
Zlib_{Compress,Uncompress} did not handle very small input buffers properly. In addition, they did not call inflate/deflate until Z_STREAM_END was returned; it was possible for them to exit when only Z_OK had returned.
This diff also fixes a bunch of lint errors.
Test Plan: Run make check
Reviewers: dhruba, sheki, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11301
Summary: This diff added an option to control the incremenal sync frequency. db_bench has a new flag bytes_per_sync for easy tuning exercise.
Test Plan: make check; db_bench
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11295
Summary:
simplify the printing code in db_bench
use TickersMap and HistogramsNameMap introduced in previous diffs.
Test Plan: ./db_bench --statistics=1 and see if all the statistics are printed
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11355
Summary:
Merge multiple multiple memtables in memory before writing it
out to a file in L0.
There is a new config parameter min_write_buffer_number_to_merge
that specifies the number of write buffers that should be merged
together to a single file in storage. The system will not flush
wrte buffers to storage unless at least these many buffers have
accumulated in memory.
The default value of this new parameter is 1, which means that
a write buffer will be immediately flushed to disk as soon it is
ready.
Test Plan: make check
Differential Revision: https://reviews.facebook.net/D11241
Summary:
Rocksdb allos specifying the number of files in L0 that triggers
compactions. Expose this api as a command line parameter for
running db_stress.
Test Plan: Run test
Reviewers: sheki, emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11343
Summary: Add a histogram to track WriteBlock times
Test Plan: db_bench and print
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11319
Summary:
I'm concerned about a random seg-fault that sometimes occurs when
running stringappend_test. I will investigate further. First, I am removing
stringappend_test from the regular release tests, and making some clean-ups
to the code.
Test Plan:
1. make stringappend_test
2. ./stringappend_test
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11313
Summary:
Use a bit set to keep track of which random number is generated.
Currently only supports single-threaded. All our perf tests are run with threads=1
Copied over bitset implementation from common/datastructures
Test Plan: printed the generated keys, and verified all keys were present.
Reviewers: MarkCallaghan, haobo, dhruba
Reviewed By: MarkCallaghan
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11247
Summary: This hopefully gives the right semantics to compaction filter. Will write a small wiki to explain the ideas.
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11121
Summary: Table is setup for compaction using Table::SetupForCompaction. So read block calls can be differentiated b/w Gets/Compaction. Use this and measure times.
Test Plan: db_bench --statistics=1
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D11217
Summary:
During compaction, we sync the output files after they are fully written out. This causes unnecessary blocking of the compaction thread and burstiness of the write traffic.
This diff simply asks the OS to sync data incrementally as they are written, on the background. The hope is that, at the final sync, most of the data are already on disk and we would block less on the sync call. Thus, each compaction runs faster and we could use fewer number of compaction threads to saturate IO.
In addition, the write traffic will be smoothed out, hopefully reducing the IO P99 latency too.
Some quick tests show 10~20% improvement in per thread compaction throughput. Combined with posix advice on compaction read, just 5 threads are enough to almost saturate the udb flash bandwidth for 800 bytes write only benchmark.
What's more promising is that, with saturated IO, iostat shows average wait time is actually smoother and much smaller.
For the write only test 800bytes test:
Before the change: await occillate between 10ms and 3ms
After the change: await ranges 1-3ms
Will test against read-modify-write workload too, see if high read latency P99 could be resolved.
Will introduce a parameter to control the sync interval in a follow up diff after cleaning up EnvOptions.
Test Plan: make check; db_bench; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11115
