Summary:
I went through all remaining shared_ptrs and removed the ones that I found not-necessary. Only GenerateCachePrefix() is called fairly often, so don't expect much perf wins.
The ones that are left are accessed infrequently and I think we're fine with keeping them.
Test Plan: make asan_check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14427
Summary: The preprocessor does not follow normal rules of && evaluation, tries to evaluate __GLIBC_PREREQ(2, 12) even though the defined() check fails. This breaks the build if __GLIBC_PREREQ is absent.
Test Plan: Try adding #undef __GLIBC_PREREQ above the offending line, build no longer breaks
Reviewed By: igor
Blame Rev: 4c81383628
Summary:
The commit at 27bbef1180 had a memory leak
that was detected by valgrind. The memtable that has a refcount decrement
in MemTableList::InstallMemtableFlushResults was not freed.
Test Plan: valgrind ./db_test --leak-check=full
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14391
Summary: Added readrandom benchmark with 300MB block cache, while database has 1GB of data
Test Plan: Ran it
Reviewers: dhruba, MarkCallaghan
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14373
Summary: These tests fail if compression libraries are not installed.
Test Plan: Manually disabled snappy, observed tests not ran.
Reviewers: dhruba, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14379
Summary: Makes it easier to monitor performance with top
Test Plan: ./manual_compaction_test with `top -H` running. Previously was two `manual_compacti`, now one shows `rocksdb:bg0`.
Reviewers: igor, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14367
Summary:
This code path can potentially accumulate multiple important_files for level 0.
But for other levels, it should have only one file in the
important_files, so it is ok not to reserve excessive space, is it not?
Test Plan: make check
Reviewers: haobo
Reviewed By: haobo
CC: reconnect.grayhat, leveldb
Differential Revision: https://reviews.facebook.net/D14349
Summary:
Large memory allocations and frees are costly and best done outside the
db-mutex. The memtables are already allocated outside the db-mutex but
they were being freed while holding the db-mutex.
This patch frees obsolete memtables outside the db-mutex.
Test Plan:
make check
db_stress
Unit tests pass, I am in the process of running stress tests.
Reviewers: haobo, igor, emayanke
Reviewed By: haobo
CC: reconnect.grayhat, leveldb
Differential Revision: https://reviews.facebook.net/D14319
Summary: We need access to options for BackupableDB
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14331
Summary: The old regression tests didn't cover memtable part at all. This is an atempt to also measure memtable performance in regression tests.
Test Plan: Ran regression_build_test.sh
Reviewers: dhruba, haobo, kailiu, emayanke
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14325
Summary: This is part of https://reviews.facebook.net/D14295 -- smaller diff that is easier to review
Test Plan: make asan_check
Reviewers: dhruba, haobo, emayanke
Reviewed By: emayanke
CC: leveldb, kailiu, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14301
Summary:
All filesystem Io should be done outside the dbmutex. There was one place
when we have to roll the transaction log that we were creating the new log file
while holding the dbmutex.
I rearranged this code so that the act of creating the new transaction log
file is done without holding the dbmutex. I also allocate the new memtable
outside the dbmutex, this is important because creating the memtable
could be heavyweight.
Test Plan: make check and dbstress
Reviewers: haobo, igor
Reviewed By: haobo
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14283
Summary: liveness of the statistics object is already ensured by the shared pointer in DB options. There's no reason to pass again shared pointer among internal functions. Raw pointer is sufficient and efficient.
Test Plan: make check
Reviewers: dhruba, MarkCallaghan, igor
Reviewed By: dhruba
CC: leveldb, reconnect.grayhat
Differential Revision: https://reviews.facebook.net/D14289
Summary:
Provide a framework to profile a query in detail to figure out latency bottleneck. Currently, in Get(), Put() and iterators, 2-3 simple timing is used. We can easily add more profile counters to the framework later.
Test Plan: Enable this profiling in seveal existing tests.
Reviewers: haobo, dhruba, kailiu, emayanke, vamsi, igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14001
Summary: user comparator needs to work if either input is prefix only.
Test Plan: ./prefix_test --write_buffer_size=100000 --total_prefixes=10000 --items_per_prefix=10
Reviewers: dhruba, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14241
Summary:
Previously we introduce a `flush_block_policy_factory` in Options, however, that options is strongly releated to Table based tables.
It will make more sense to move it to block based table's own factory class.
Test Plan: make check to pass existing tests
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14211
Summary:
These bugs were caught by ASAN crash test.
1. The first one, in table/filter_block.cc is very nasty. We first reference entries_ and store the reference to Slice prev. Then, we call entries_.append(), which can change the reference. The Slice prev now points to junk.
2. The second one is a bug in a test, so it's not very serious. Once we set read_opts.prefix, we never clear it, so some other function might still reference it.
Test Plan: asan crash test now runs more than 5 mins. Before, it failed immediately. I will run the full one, but the full one takes quite some time (5 hours)
Reviewers: dhruba, haobo, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14223
Summary: Add asan_check rule to Makefile. After we add this, we will create Jenkins run that will check for asan errors!
Test Plan: make asan_check
Reviewers: dhruba, kailiu, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14205
Summary:
The primary motivation of the changes is to make it easier to figure out the inside of the tables.
* rename "table stats" to "table properties" since now we have more than "integers" to store in the property block.
* Add filter block size to the basic table properties.
* Whenever a table is built, we'll log the table properties (the sample output is in Test Plan).
* Make an api to expose deleted keys.
Test Plan:
Passed all existing test. and the sample output of table stats:
==================================================================
Basic Properties
------------------------------------------------------------------
# data blocks: 1
# entries: 1
raw key size: 9
raw average key size: 9
raw value size: 9
raw average value size: 0
data block size: 25
index block size: 27
filter block size: 18
(estimated) table size: 70
filter policy: rocksdb.BuiltinBloomFilter
==================================================================
User collected properties: InternalKeyPropertiesCollector
------------------------------------------------------------------
kDeletedKeys: 1
==================================================================
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14187
Summary: We don't need that dependency
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14199
Summary:
Sure, let me put 8 bytes in that int32_t.
Brought to you by ASAN!
Test Plan: ttl_test
Reviewers: dhruba, haobo, kailiu, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14193
Summary:
For some reason, snappy on CentOS 5.2 when compiled with gcc 4.8.1 segfaults on strcmp. (!?)
Add an if to compile with gcc4.7.1 if you're compiling on CentOS 5.2. Please update your devservers to CentOS 6.
Test Plan:
make clean; make check
on both my devserver (CentOS 6) and dhruba's (CentOS 5.2)
Reviewers: dhruba, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14169
Summary: We also need to use custom glibc and libgcc includes instead of system ones.
Test Plan:
'make clean; make check'.
Will also try on @dhruba's dev server.
Reviewers: dhruba, kailiu
Reviewed By: kailiu
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D14157
Summary: Explained what it takes to compile it on linux.
Test Plan: -
Reviewers: dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14151
Summary:
1. Moved the compiler back to 4.8.1 and uses Centos 5.2 binaries if OS is Centos 5.2.
2. Fixes this issue: https://github.com/facebook/rocksdb/issues/7
3. We use lot of c++11 features, so we can't pretend we can compile without them. Makes it a first class dependency.
4. Fix blob_store_test, which failes on Ubuntu with "too many files opened" error
5. Removed dependency on port/port_chromium.h, which does not even exist on our system
Test Plan: make clean; make check
Reviewers: dhruba, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14145
Summary: Dhruba can't compile on gcc4.8.1 so I'm moving temporarily back to 4.7.1 until we figure out what's wrong with 4.8. on his server.
Test Plan: It can compile on my devserver, but please 'arc patch' this diff and try compiling on your machine
Reviewers: dhruba, kailiu
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14139
