Summary:
Update compaction_iterator_test with write-prepared transaction DB related tests. Transaction related tests are group in CompactionIteratorWithSnapshotCheckerTest. The existing test are duplicated to make them also test with dummy SnapshotChecker that will say every key is visible to every snapshot (this is okay, we still compare sequence number to verify visibility). Merge related tests are disabled and will be revisit in another PR.
Existing db_iterator_tests are also duplicated to test with dummy read_callback that will say every key is committed.
Closes https://github.com/facebook/rocksdb/pull/3466
Differential Revision: D6909253
Pulled By: yiwu-arbug
fbshipit-source-id: 2ae4656b843a55e2e9ff8beecf21f2832f96cd25
Summary:
This patch takes advantage of memtable being able to detect duplicate <key,seq> and returning TryAgain to handle duplicate keys in WritePrepared Txns. Through WriteBatchWithIndex's index it detects existence of at least a duplicate key in the write batch. If duplicate key was reported, it then pays the cost of counting the number of sub-patches by iterating over the write batch and pass it to DBImpl::Write. DB will make use of the provided batch_count to assign proper sequence numbers before sending them to the WAL. When later inserting the batch to the memtable, it increases the seq each time memtbale reports a duplicate (a sub-patch in our counting) and tries again.
Closes https://github.com/facebook/rocksdb/pull/3455
Differential Revision: D6873699
Pulled By: maysamyabandeh
fbshipit-source-id: db8487526c3a5dc1ddda0ea49f0f979b26ae648d
Summary:
There are a couple of places where we swallow any error from
WriteBuffer() - in SwitchMemtable() and DBImpl::CloseImpl(). Propagate
the error up in those cases rather than ignoring it.
Closes https://github.com/facebook/rocksdb/pull/3404
Differential Revision: D6879954
Pulled By: anand1976
fbshipit-source-id: 2ef88b554be5286b0a8bad7384ba17a105395bdb
Summary:
ForwardIterator::SVCleanup() sometimes didn't pin superversion when it was supposed to. See the added test for the scenario. Here's the ASAN output of the added test without the fix (using `COMPILE_WITH_ASAN=1 make`): https://pastebin.com/9rD0Ywws
Closes https://github.com/facebook/rocksdb/pull/3415
Differential Revision: D6817414
Pulled By: al13n321
fbshipit-source-id: bc80c44ea78a3a1fa885dfa448a26111f91afb24
Summary:
Per some discussions, this will switch our Appveyor testing to use Visual Studio 2017.
Closes https://github.com/facebook/rocksdb/pull/3445
Differential Revision: D6874918
Pulled By: gfosco
fbshipit-source-id: c5a0032ca9f37f0d3baeae35c59d850d528c3176
Summary:
Currently DB does not accept duplicate keys (keys with the same user key and the same sequence number). If Memtable returns false when receiving such keys, we can benefit from this signal to properly increase the sequence number in the rare cases when we have a duplicate key in the write batch written to DB under WritePrepared transactions.
Closes https://github.com/facebook/rocksdb/pull/3418
Differential Revision: D6822412
Pulled By: maysamyabandeh
fbshipit-source-id: adea3ce5073131cd38ed52b16bea0673b1a19e77
Summary:
Updated the test case to handle tmpfs mounted at directories different from "/dev/shm/".
Closes https://github.com/facebook/rocksdb/pull/3440
Differential Revision: D6848213
Pulled By: ajkr
fbshipit-source-id: 465e9dbf0921d0930161f732db6b3766bb030589
Summary:
Using `DeleteFilesInRange` to delete files in a lot of ranges can be slow, because
`VersionSet::LogAndApply` is expensive.
This PR adds a new `DeleteFilesInRange` function to delete files in multiple
ranges at once.
Close https://github.com/facebook/rocksdb/issues/2951
Closes https://github.com/facebook/rocksdb/pull/3431
Differential Revision: D6849228
Pulled By: ajkr
fbshipit-source-id: daeedcabd8def4b1d9ee95a58266dee77b5d68cb
Summary:
In the test, there can be a dead lock between background flush thread and foreground main thread as following:
* background flush thread:
- holding db mutex, while
- waiting on "DBImpl::FlushMemTableToOutputFile:BeforeInstallSV" sync point.
* foreground thread:
- waiting for db mutex to write "key2"
Fixing by let background flush thread wait without holding db mutex.
Closes https://github.com/facebook/rocksdb/pull/3436
Differential Revision: D6841334
Pulled By: yiwu-arbug
fbshipit-source-id: b020768ac94e166e40953c5d09e505515a5f244d
Summary:
Added a test for three dynamic universal compaction options, in the realm of read amplification:
- size_ratio
- min_merge_width
- max_merge_width
Also updated DynamicUniversalCompactionSizeAmplification by adding a check on compaction reason.
Found a bug in compaction reason setting while working on this PR, and fixed in #3412 .
TODO for later: Still to add tests for these options: compression_size_percent, stop_style and trivial_move.
Closes https://github.com/facebook/rocksdb/pull/3419
Differential Revision: D6822217
Pulled By: sagar0
fbshipit-source-id: 074573fca6389053cbac229891a0163f38bb56c4
Summary:
ReadOptions.fill_cache is set in compaction inputs and can be set by users in their queries too. It tells RocksDB not to put a data block used to block cache.
The memory used by the data block is, however, not trackable by users.
To make the system more manageable, we can cost the block to block cache while using it, and then release it after using.
Closes https://github.com/facebook/rocksdb/pull/3333
Differential Revision: D6670230
Pulled By: miasantreble
fbshipit-source-id: ab848d3ed286bd081a13ee1903de357b56cbc308
Summary: Grandfather in super old lint issues to make a clean slate for moving forward that allows us to have stronger enforcement on new issues.
Reviewed By: yiwu-arbug
Differential Revision: D6821806
fbshipit-source-id: 22797d31ec58e9eb0255d3b66fedfcfcb0dc127c
Summary:
While writing tests for dynamic Universal Compaction options, I found that the compaction reasons we set for size-ratio based and sorted-run based universal compactions are swapped with each other. Fixed it.
Closes https://github.com/facebook/rocksdb/pull/3412
Differential Revision: D6820540
Pulled By: sagar0
fbshipit-source-id: 270a188968ba25b2c96a8339904416c4c87ff5b3
Summary:
In DBIter, Prev() calls FindValueForCurrentKey() to search the current value backward. If it finds that there are too many stale value being skipped, it falls back to FindValueForCurrentKeyUsingSeek(), seeking directly to the key with snapshot sequence. After introducing read_callback, however, the key it seeks to might not be visible, according to read_callback. It thus needs to keep searching forward until the first visible value.
Closes https://github.com/facebook/rocksdb/pull/3382
Differential Revision: D6756148
Pulled By: yiwu-arbug
fbshipit-source-id: 064e39b1eec5e083af1c10142600f26d1d2697be
Summary:
In ColumnFamilySet destructor, assert it hold the last reference to cfd before destroy them.
Closes#3112
Closes https://github.com/facebook/rocksdb/pull/3397
Differential Revision: D6777967
Pulled By: yiwu-arbug
fbshipit-source-id: 60b19070e0c194b3b6146699140c1d68777866cb
Summary:
Now in leveled compaction, we allocate solely based on output target file size. If the total input size is smaller than the number, we should use the total input size instead. Also, cap the allocate size to 1GB.
Closes https://github.com/facebook/rocksdb/pull/3385
Differential Revision: D6762363
Pulled By: siying
fbshipit-source-id: e30906f6e9bff3ec847d2166e44cb49c92f98a13
Summary:
FreeBSD uses jemalloc as the base malloc implementation.
The patch has been functional on FreeBSD as of the MariaDB 10.2 port.
Closes https://github.com/facebook/rocksdb/pull/3386
Differential Revision: D6765742
Pulled By: yiwu-arbug
fbshipit-source-id: d55dbc082eecf640ef3df9a21f26064ebe6587e8
Summary:
Flush() call could be waiting indefinitely if min_write_buffer_number_to_merge is used. Consider the sequence:
1. User call Flush() with flush_options.wait = true
2. The manual flush started in the background
3. New memtable become immutable because of writes. The new memtable will not trigger flush if min_write_buffer_number_to_merge is not reached.
4. The manual flush finish.
Because of the new memtable created at step 3 not being flush, previous logic of WaitForFlushMemTable() keep waiting, despite the memtables it intent to flush has been flushed.
Here instead of checking if there are any more memtables to flush, WaitForFlushMemTable() also check the id of the earliest memtable. If the id is larger than that of latest memtable at the time flush was initiated, it means all the memtable at the time of flush start has all been flush.
Closes https://github.com/facebook/rocksdb/pull/3378
Differential Revision: D6746789
Pulled By: yiwu-arbug
fbshipit-source-id: 35e698f71c7f90b06337a93e6825f4ea3b619bfa
Summary:
When calling `DisableFileDeletions` followed by `GetSortedWalFiles`, we guarantee the files returned by the latter call won't be deleted until after file deletions are re-enabled. However, `GetSortedWalFiles` didn't omit files already planned for deletion via `PurgeObsoleteFiles`, so the guarantee could be broken.
We fix it by making `GetSortedWalFiles` wait for the number of pending purges to hit zero if file deletions are disabled. This condition is eventually met since `PurgeObsoleteFiles` is guaranteed to be called for the existing pending purges, and new purges cannot be scheduled while file deletions are disabled. Once the condition is met, `GetSortedWalFiles` simply returns the content of DB and archive directories, which nobody can delete (except for deletion scheduler, for which I plan to fix this bug later) until deletions are re-enabled.
Closes https://github.com/facebook/rocksdb/pull/3341
Differential Revision: D6681131
Pulled By: ajkr
fbshipit-source-id: 90b1e2f2362ea9ef715623841c0826611a817634
Summary:
After af92d4ad11, only exclusive manual compaction can have conflict. dc360df81e updated the conflict-checking test case accordingly. But we missed the point that exclusive manual compaction can only conflict with automatic compactions scheduled after it, since it waits on pending automatic compactions before it begins running.
This PR updates the test case to ensure the automatic compactions are scheduled after the manual compaction starts but before it finishes, thus ensuring a conflict. I also cleaned up the test case to use less space as I saw it cause out-of-space error on travis.
Closes https://github.com/facebook/rocksdb/pull/3375
Differential Revision: D6735162
Pulled By: ajkr
fbshipit-source-id: 020530a4e150a4786792dce7cec5d66b420cb884
Summary:
* Fix DBTest.CompactRangeWithEmptyBottomLevel lite build failure
* Fix DBTest.AutomaticConflictsWithManualCompaction failure introduce by #3366
* Fix BlockBasedTableTest::IndexUncompressed should be disabled if snappy is disabled
* Fix ASAN failure with DBBasicTest::DBClose test
Closes https://github.com/facebook/rocksdb/pull/3373
Differential Revision: D6732313
Pulled By: yiwu-arbug
fbshipit-source-id: 1eb9b9d9a8d795f56188fa9770db9353f6fdedc5
Summary:
If there's manual compaction in the queue, then "HaveManualCompaction(compaction_queue_.front())" will return true, and this cause too frequent MaybeScheduleFlushOrCompaction().
https://github.com/facebook/rocksdb/issues/3198
Closes https://github.com/facebook/rocksdb/pull/3366
Differential Revision: D6729575
Pulled By: ajkr
fbshipit-source-id: 96da04f8fd33297b1ccaec3badd9090403da29b0
Summary:
Currently, the only way to close an open DB is to destroy the DB
object. There is no way for the caller to know the status. In one
instance, the destructor encountered an error due to failure to
close a log file on HDFS. In order to prevent silent failures, we add
DB::Close() that calls CloseImpl() which must be implemented by its
descendants.
The main failure point in the destructor is closing the log file. This
patch also adds a Close() entry point to Logger in order to get status.
When DBOptions::info_log is allocated and owned by the DBImpl, it is
explicitly closed by DBImpl::CloseImpl().
Closes https://github.com/facebook/rocksdb/pull/3348
Differential Revision: D6698158
Pulled By: anand1976
fbshipit-source-id: 9468e2892553eb09c4c41b8723f590c0dbd8ab7d
Summary:
Split `JobContext::HaveSomethingToDelete` into two functions: itself and `JobContext::HaveSomethingToClean`. Now we won't call `DBImpl::PurgeObsoleteFiles` in cases where we really just need to call `JobContext::Clean`. The change is needed because I want to track pending calls to `PurgeObsoleteFiles` for a bug fix, which is much simpler if we only call it after `FindObsoleteFiles` finds files to delete.
Closes https://github.com/facebook/rocksdb/pull/3350
Differential Revision: D6690609
Pulled By: ajkr
fbshipit-source-id: 61502e7469288afe16a663a1b7df345baeaf246f
Summary:
This test often causes out-of-space error when run on travis. We don't want such stress tests in our unit test suite.
The bug in #596, which this test intends to expose, can be repro'd as long as the bottommost level(s) are empty when CompactRange is called. I rewrote the test to cover this simple case without writing a lot of data.
Closes https://github.com/facebook/rocksdb/pull/3362
Differential Revision: D6710417
Pulled By: ajkr
fbshipit-source-id: 9a1ec85e738c813ac2fee29f1d5302065ecb54c5
Summary:
to save a string copy for some use cases.
The change is pretty straightforward, please feel free to let me know if you want to suggest any tests for it.
Closes https://github.com/facebook/rocksdb/pull/3349
Differential Revision: D6706828
Pulled By: yiwu-arbug
fbshipit-source-id: 873ce4442937bdc030b395c7f99228eda7f59eb7
Summary:
It was using the same directory as `db_options_test` so transiently failed when unit tests were run in parallel.
Closes https://github.com/facebook/rocksdb/pull/3352
Differential Revision: D6691649
Pulled By: ajkr
fbshipit-source-id: bee433484fec4faedd5cadf2db3c92fdcc99a170
Summary:
I experienced weird segfault because of this mismatch of type in log formatting. Fix it.
Closes https://github.com/facebook/rocksdb/pull/3345
Differential Revision: D6687224
Pulled By: siying
fbshipit-source-id: c51fb1c008b7ebc3efdc353a4adad3e8f5b3e9de
Summary:
got confused while reading `FindObsoleteFiles` due to thinking it's a local variable, so renamed it properly
Closes https://github.com/facebook/rocksdb/pull/3342
Differential Revision: D6684797
Pulled By: ajkr
fbshipit-source-id: a4df0aae1cccce99d4dd4d164aadc85b17707132
Summary:
Fixes the following ASAN error:
```
==2108042==ERROR: AddressSanitizer: stack-use-after-scope on address 0x7fc50ae9b868 at pc 0x7fc5112aff55 bp 0x7fff9eb9dc10 sp 0x7fff9eb9dc08
=== How to use this, how to get the raw stack trace, and more: fburl.com/ASAN ===
READ of size 8 at 0x7fc50ae9b868 thread T0
SCARINESS: 23 (8-byte-read-stack-use-after-scope)
#0 rocksdb/dbformat.h:164 rocksdb::InternalKeyComparator::user_comparator() const
#1 librocksdb_src_rocksdb_lib.so+0x1429a7d rocksdb::RangeDelAggregator::InitRep(std::vector<...> const&)
#2 librocksdb_src_rocksdb_lib.so+0x142ceae rocksdb::RangeDelAggregator::AddTombstones(std::unique_ptr<...>)
#3 librocksdb_src_rocksdb_lib.so+0x1382d88 rocksdb::ForwardIterator::RebuildIterators(bool)
#4 librocksdb_src_rocksdb_lib.so+0x1382362 rocksdb::ForwardIterator::ForwardIterator(rocksdb::DBImpl*, rocksdb::ReadOptions const&, rocksdb::ColumnFamilyData*, rocksdb::SuperVersion*)
#5 librocksdb_src_rocksdb_lib.so+0x11f433f rocksdb::DBImpl::NewIterator(rocksdb::ReadOptions const&, rocksdb::ColumnFamilyHandle*)
#6 rocksdb/src/include/rocksdb/db.h:382 rocksdb::DB::NewIterator(rocksdb::ReadOptions const&)
#7 rocksdb/db_range_del_test.cc:807 rocksdb::DBRangeDelTest_TailingIteratorRangeTombstoneUnsupported_Test::TestBody()
#18 rocksdb/db_range_del_test.cc:1006 main
Address 0x7fc50ae9b868 is located in stack of thread T0 at offset 104 in frame
#0 librocksdb_src_rocksdb_lib.so+0x13825af rocksdb::ForwardIterator::RebuildIterators(bool)
```
Closes https://github.com/facebook/rocksdb/pull/3300
Differential Revision: D6612989
Pulled By: ajkr
fbshipit-source-id: e7ea2ed914c1b80a8a29d71d92440a6bd9cbcc80
Summary:
When there is a background error PreprocessWrite returns without marking the logs synced. If we keep need_log_sync to true, it would try to sync them at the end, which would break the logic. The patch would unset need_log_sync if the logs end up not being marked for sync in PreprocessWrite.
Closes https://github.com/facebook/rocksdb/pull/3293
Differential Revision: D6602347
Pulled By: maysamyabandeh
fbshipit-source-id: 37ee04209e8dcfd78de891654ce50d0954abeb38
Summary:
A proper implementation of Iterator::Refresh() for WritePreparedTxnDB would require release and acquire another snapshot. Since MyRocks don't make use of Iterator::Refresh(), we just simply mark it as not supported.
Closes https://github.com/facebook/rocksdb/pull/3290
Differential Revision: D6599931
Pulled By: yiwu-arbug
fbshipit-source-id: 4e1632d967316431424f6e458254ecf9a97567cf
Summary:
ScopedArenaIterator should be defined after range_del_agg so that it destructs the assigned iterator, which depends on range_del_agg, before it range_del_agg is already destructed.
Closes https://github.com/facebook/rocksdb/pull/3281
Differential Revision: D6592332
Pulled By: maysamyabandeh
fbshipit-source-id: 89a15d8ed13d0fc856b0c47dce3d91778738dbac
Summary:
Add a new histogram stat called rocksdb.db.flush.micros for memtable
flush
Closes https://github.com/facebook/rocksdb/pull/3269
Differential Revision: D6559496
Pulled By: anand1976
fbshipit-source-id: f5c771ba2568630458751795e8c37a493ff9b14d
Summary:
Previously we store sequence number range of each blob files, and use the sequence number range to check if the file can be possibly visible by a snapshot. But it adds complexity to the code, since the sequence number is only available after a write. (The current implementation get sequence number by calling GetLatestSequenceNumber(), which is wrong.) With the patch, we are not storing sequence number range, and check if snapshot_sequence < obsolete_sequence to decide if the file is visible by a snapshot (previously we check if first_sequence <= snapshot_sequence < obsolete_sequence).
Closes https://github.com/facebook/rocksdb/pull/3274
Differential Revision: D6571497
Pulled By: yiwu-arbug
fbshipit-source-id: ca06479dc1fcd8782f6525b62b7762cd47d61909
Summary:
added `ThreadType::BOTTOM_PRIORITY` which is used in the `ThreadStatus` object to indicate the thread is used for bottom-pri compactions. Previously there was a bug where we mislabeled such threads as `ThreadType::LOW_PRIORITY`.
Closes https://github.com/facebook/rocksdb/pull/3270
Differential Revision: D6559428
Pulled By: ajkr
fbshipit-source-id: 96b1a50a9c19492b1a5fd1b77cf7061a6f9f1d1c
Summary:
Currently WriteImplWALOnly simply returns when disableWAL is set. This is an incorrect behavior since it does not allocated the sequence number, which is a side-effect of writing to the WAL. This patch fixes the issue.
Closes https://github.com/facebook/rocksdb/pull/3262
Differential Revision: D6550974
Pulled By: maysamyabandeh
fbshipit-source-id: 745a83ae8f04e7ca6c8ffb247d6ef16c287c52e7
Summary:
DeleteScheduler::MarkAsTrash() don't handle existing .trash files correctly
This cause rocksdb to not being able to delete existing .trash files on restart
Closes https://github.com/facebook/rocksdb/pull/3261
Differential Revision: D6548003
Pulled By: IslamAbdelRahman
fbshipit-source-id: c3800639412e587a690062c63076a5a08881e0e6
Summary:
Add snapshot_checker check whenever we need to check sequence against snapshots and decide what to do with an input key. The changes are related to one of:
* compaction filter
* single delete
* delete at bottom level
* merge
Closes https://github.com/facebook/rocksdb/pull/3251
Differential Revision: D6537850
Pulled By: yiwu-arbug
fbshipit-source-id: 3faba40ed5e37779f4a0cb7ae78af9546659c7f2
