Summary:
Use ```FileSystem::Default``` to read ```/proc/sys/kernel/uuid```, so it works for ```Envs``` with remote ```FileSystem``` as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7672
Reviewed By: riversand963
Differential Revision: D24998702
Pulled By: anand1976
fbshipit-source-id: fa95c1d70f0e4ed17561201f047aa055046d06c3
Summary:
Since the hashes should not be persisted in output_validator
nor mock_env.
Also updated NPHash64 to use 64-bit seed, and comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7632
Test Plan:
make check, and new build setting that enables modification
to NPHash64, to check for behavior depending on specific values. Added
that setting to one of the CircleCI configurations.
Reviewed By: jay-zhuang
Differential Revision: D24833780
Pulled By: pdillinger
fbshipit-source-id: 02a57652ccf1ac105fbca79e77875bb7bf7c071f
Summary:
Consider the following sequence of events:
1. Db flushed an SST with file number N, appended to MANIFEST, and tried to sync the MANIFEST.
2. Syncing MANIFEST failed and db crashed.
3. Db tried to recover with this MANIFEST. In the meantime, no entry about the newly-flushed SST was found in the MANIFEST. Therefore, RocksDB replayed WAL and tried to flush to an SST file reusing the same file number N. This failed because file system does not support overwrite. Then Db deleted this file.
4. Db crashed again.
5. Db tried to recover. When db read the MANIFEST, there was an entry referencing N.sst. This could happen probably because the append in step 1 finally reached the MANIFEST and became visible. Since N.sst had been deleted in step 3, recovery failed.
It is possible that N.sst created in step 1 is valid. Although step 3 would still fail since the MANIFEST was not synced properly in step 1 and 2, deleting N.sst would make it impossible for the db to recover even if the remaining part of MANIFEST was appended and visible after step 5.
After this PR, in step 3, immediately after recovering from MANIFEST, a new MANIFEST is created, then we find that N.sst is not referenced in the MANIFEST, so we delete it, and we'll not reuse N as file number. Then in step 5, since the new MANIFEST does not contain N.sst, the recovery failure situation in step 5 won't happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7621
Test Plan:
1. some tests are updated, because these tests assume that new MANIFEST is created after WAL recovery.
2. a new unit test is added in db_basic_test to simulate step 3.
Reviewed By: riversand963
Differential Revision: D24668144
Pulled By: cheng-chang
fbshipit-source-id: 90d7487fbad2bc3714f5ede46ea949895b15ae3b
Summary:
This is a PR generated **semi-automatically** by an internal tool to remove unused includes and `using` statements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7604
Test Plan: make check
Reviewed By: ajkr
Differential Revision: D24579392
Pulled By: riversand963
fbshipit-source-id: c4bfa6c6b08da1de186690d37eb73d8fff45aecd
Summary:
A user who extended `Logger` recently pointed out it is unusual to
require they implement the two-argument `Logv()` overload when they've
already implemented the three-argument `Logv()` overload. I agree with
that and think we can fix it by only calling the two-argument overload
from the default implementation of the three-argument overload. Then
when the three-argument overload is overridden, RocksDB would not
rely on the two-argument overload. Only `Logger::LogHeader()` needed
adjustment to achieve this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7605
Reviewed By: riversand963
Differential Revision: D24584749
Pulled By: ajkr
fbshipit-source-id: 9aabe040ac761c4c0dbebc4be046967403ecaf21
Summary:
This PR does a few things:
1. The MockFileSystem class was split out from the MockEnv. This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one). The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.
2. Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set. To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).
3. Updated the test framework to have a ROCKSDB_GTEST_SKIP macro. This can be used to flag tests that are skipped. Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).
I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV, both, and neither under both MacOS and RedHat. A few tests were disabled/skipped for the MEM/ENCRYPTED cases. The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem. (I will also push a change to disable those tests soon). There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.
Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.
Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale. I do not know how to do that, so if someone could write that job, it would be appreciated :)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566
Reviewed By: zhichao-cao
Differential Revision: D24408980
Pulled By: jay-zhuang
fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
Update IOTrace operations in stackabledb.h and also trace few
other IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7514
Test Plan: make check -j64
Reviewed By: anand1976
Differential Revision: D24151202
Pulled By: akankshamahajan15
fbshipit-source-id: 112cd3d2041f8c6398b7b0ba1a783b8c93224d4a
Summary:
After unclean crash, the tail of the log could look as follows due to block buffering, even when the call to `ROCKSDB_LOG_ERROR()` finished.
```
2020/09/29-13:54:39.596710 7f67025fe700 [ERROR] [/db_impl/db_impl_compaction_flush.cc:2500] Waiting after background compaction err
```
This PR forces the flush while logging warning severity or higher to prevent that case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7462
Reviewed By: riversand963
Differential Revision: D24000154
Pulled By: ajkr
fbshipit-source-id: 3bf5f1e69a62ee10e84095cebc88937a8f81b4ad
Summary:
Add new AppendWithVerify and PositionedAppendWithVerify APIs to Env and FileSystem to bring the data verification information (data checksum information) from upper layer (e.g., WritableFileWriter) to the storage layer. This PR only include the API definition, no functional codes are added to unblock other developers which depend on these APIs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7419
Test Plan: make -j32
Reviewed By: pdillinger
Differential Revision: D23883196
Pulled By: zhichao-cao
fbshipit-source-id: 94676c26bc56144cc32e3661f84f21eccd790411
Summary:
Implement a parsing tool io_tracer_parser that takes IO trace file (binary file) with command line argument --io_trace_file and output file with --output_file and dumps the IO trace records in outputfile in human readable form.
Also added unit test cases that generates IO trace records and calls io_tracer_parse to parse those records.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7333
Test Plan:
make check -j64,
Add unit test cases.
Reviewed By: anand1976
Differential Revision: D23772360
Pulled By: akankshamahajan15
fbshipit-source-id: 9c20519c189362e6663352d08863326f3e496271
Summary:
While rocksdb can compile on both macOS and Linux with Buck, it couldn't be
compiled on Windows. The only way to compile it on Windows was with the CMake
build.
To keep the multi-platform complexity low, I've simply included all the Windows
bits in the TARGETS file, and added large #if blocks when not on Windows, the
same was done on the posix specific files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7406
Test Plan:
On my devserver:
buck test //rocksdb/...
On Windows:
buck build mode/win //rocksdb/src:rocksdb_lib
Reviewed By: pdillinger
Differential Revision: D23874358
Pulled By: xavierd
fbshipit-source-id: 8768b5d16d7e8f44b5ca1e2483881ca4b24bffbe
Summary:
Cleaned up the public API to use the EncryptedEnv. This change will allow providers to be developed and added to the system easier in the future. It will also allow better integration in the future with the OPTIONS file.
- The internal classes were moved out of the public API into an internal "env_encryption_ctr.h" header. Short-cut constructors were added to provide the original API functionality.
- The APIs to the constructors were changed to take shared_ptr, rather than raw pointers or references to allow better memory management and alternative implementations.
- CreateFromString methods were added to allow future expansion to other provider and cipher implementations through a standard API.
Additionally, there was a code duplication in the NewXXXFile methods. This common code was moved under a templatized function.
A first-pass at structuring the code was made to potentially allow multiple EncryptionProviders in a single EncryptedEnv. The idea was that different providers may use different cipher keys or different versions/algorithms. The EncryptedEnv should have some means of picking different providers based on information. The groundwork was started for this (the use of the provider_ member variable was localized) but the work has not been completed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7279
Reviewed By: jay-zhuang
Differential Revision: D23709440
Pulled By: zhichao-cao
fbshipit-source-id: 0e845fff0e03a52603eb9672b4ade32d063ff2f2
Summary:
Replace FSRandomRWFile pointer with FSRandomRWFilePtr object in the rocksdb internal code.
This new object wraps FSRandomRWFile pointer.
Objective: If tracing is enabled, FSRandomRWFile object returns FSRandomRWFileTracingWrapper pointer that includes all necessary information in IORecord and calls underlying FileSystem and invokes IOTracer to dump that record in a binary file. If tracing is disabled then, underlying FileSystem pointer is returned directly.
FSRandomRWFilePtr wrapper class is added to bypass the FSRandomRWFileWrapper when
tracing is disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7198
Test Plan: make check -j64
Reviewed By: anand1976
Differential Revision: D23421116
Pulled By: akankshamahajan15
fbshipit-source-id: 8a5ba0e7d9c1ba34c3a6f29829b107c5f09ab6a3
Summary:
Replace FSWritableFile pointer with FSWritableFilePtr
object in WritableFileWriter.
This new object wraps FSWritableFile pointer.
Objective: If tracing is enabled, FSWritableFile Ptr returns
FSWritableFileTracingWrapper pointer that includes all necessary
information in IORecord and calls underlying FileSystem and invokes
IOTracer to dump that record in a binary file. If tracing is disabled
then, underlying FileSystem pointer is returned directly.
FSWritableFilePtr wrapper class is added to bypass the
FSWritableFileWrapper when
tracing is disabled.
Test Plan: make check -j64
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7193
Reviewed By: anand1976
Differential Revision: D23355915
Pulled By: akankshamahajan15
fbshipit-source-id: e62a27a13c1fd77e36a6dbafc7006d969bed25cf
Summary:
(1) Skip check on specific key if restoring an old backup
(small minority of cases) because it can fail in those cases. (2) Remove
an old assertion about number of column families and number of keys
passed in, which is broken by atomic flush (cf_consistency) test. Like
other code (for better or worse) assume a single key and iterate over
column families. (3) Apply mock_direct_io to NewSequentialFile so that
db_stress backup works on /dev/shm.
Also add more context to output in case of backup/restore db_stress
failure.
Also a minor fix to BackupEngine to report first failure status in
creating new backup, and drop another clue about the potential
source of a "Backup failed" status.
Reverts "Disable backup/restore stress test (https://github.com/facebook/rocksdb/issues/7350)"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7357
Test Plan:
Using backup_one_in=10000,
"USE_CLANG=1 make crash_test_with_atomic_flush" for 30+ minutes
"USE_CLANG=1 make blackbox_crash_test" for 30+ minutes
And with use_direct_reads with TEST_TMPDIR=/dev/shm/rocksdb
Reviewed By: riversand963
Differential Revision: D23567244
Pulled By: pdillinger
fbshipit-source-id: e77171c2e8394d173917e36898c02dead1c40b77
Summary:
Replace FSRandomAccessFile pointer with FSRandomAccessFilePtr
object in RandomAccessFileReader.
This new object wraps FSRandomAccessFile pointer.
Objective: If tracing is enabled, FSRandomAccessFile Ptr returns
FSRandomAccessFileTracingWrapper pointer that includes all necessary
information in IORecord and calls underlying FileSystem and invokes
IOTracer to dump that record in a binary file. If tracing is disabled
then, underlying FileSystem pointer is returned directly.
FSRandomAccessFilePtr wrapper class is added to bypass the FSRandomAccessFileWrapper when
tracing is disabled.
Test Plan: make check -j64
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7192
Reviewed By: anand1976
Differential Revision: D23356867
Pulled By: akankshamahajan15
fbshipit-source-id: 48f31168166a17a7444b40be44a9a9d4a5c7182c
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests. The DB functionality required for this test now passes the check.
When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283
Reviewed By: akankshamahajan15
Differential Revision: D23251497
Pulled By: ajkr
fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
Summary:
This diff contains following changes:
1. Replace `FSSequentialFile` pointer with `FSSequentialFilePtr` object that wraps `FSSequentialFile` pointer in `SequenceFileReader`.
Objective: If tracing is enabled, `FSSequentialFilePtr` returns `FSSequentialFileTracingWrapper` pointer that includes all necessary information in `IORecord` and calls underlying FileSystem and invokes `IOTracer` to dump that record in a binary file. If tracing is disabled then, underlying `FileSystem` pointer is returned directly. `FSSequentialFilePtr` wrapper class is added to bypass the `FSSequentialFileTracingWrapper` when tracing is disabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7190
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
Reviewed By: anand1976
Differential Revision: D23059616
Pulled By: akankshamahajan15
fbshipit-source-id: 1564b94dd1297cd0fbfe2ed5c9cc3e20f7395301
Summary:
This pull request adds the parameter --fs_uri to db_bench and db_stress, creating a composite env combining the default env with a specified registered rocksdb file system.
This makes it easier to develop and test new RocksDB FileSystems.
The pull request also registers the posix file system for testing purposes.
Examples:
```
$./db_bench --fs_uri=posix:// --benchmarks=fillseq
$./db_stress --fs_uri=zenfs://nullb1
```
zenfs is a RocksDB FileSystem I'm developing to add support for zoned block devices, and in that case the zoned block device is specified in the uri (a zoned null block device in the above example).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6878
Reviewed By: siying
Differential Revision: D23023063
Pulled By: ajkr
fbshipit-source-id: 8b3fe7193ce45e683043b021779b7a4d547af247
Summary:
As part of the IOTracing project, this PR
1. Caches "FileSystemPtr" object(wrapper class that returns file system pointer based on tracing enabled) instead of "FileSystem" pointer.
2. FileSystemPtr object is created using FileSystem pointer and IOTracer
pointer.
3. IOTracer shared_ptr is created in DBImpl and it is passed to different classes through constructor.
4. When tracing is enabled through DB::StartIOTrace, FileSystemPtr
returns FileSystemTracingWrapper pointer for tracing purpose and when
it is disabled underlying FileSystem pointer is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7180
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
Reviewed By: anand1976
Differential Revision: D22987117
Pulled By: akankshamahajan15
fbshipit-source-id: 6073617e4c2d5bc363914f3a1f55ae3b0a58fbf1
Summary:
A colon will be added after 'msg' automatically when invoke function Status(Code _code, const Slice& msg, const Slice& msg2),
it's not needed to append a colon explicitly to 'msg'.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7041
Reviewed By: ajkr
Differential Revision: D22292801
fbshipit-source-id: 8f2d69065bb779d2613468bf9fc9169f32c3f1ec
Summary:
Make (most of) the env*_test pass when ASSERT_STATUS_CHECKED is enabled.
One test that opens a database is currently disabled in this mode, as there are many errors that need revisited for DB tests and status checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7176
Reviewed By: cheng-chang
Differential Revision: D22799278
Pulled By: ajkr
fbshipit-source-id: 16d8a02eaeecd6df1060249b6a5811292801f2ed
Summary:
1. Add the wrapper classes FileSystemTracingWrapper, FSSequentialFileTracingWrapper, FSRandomAccessFileTracingWrapper, FSWritableFileTracingWrapper, FSRandomRWFileTracingWrapper that forward the calls to underlying storage system and then pass the file operation information to IOTracer. IOTracer dumps the record in binary format for tracing.
2. Add the wrapper classes FileSystemPtr, FSSequentialFilePtr, FSRandomAccessFilePtr, FSWritableFilePtr and FSRandomRWFilePtr that overload operator-> and return ptr to underlying storage system or Tracing wrapper class based on enabling/disabling of IO tracing. These classes are added to bypass Tracing Wrapper classes when we disable tracing.
3. Add enums in trace.h that distinguish which options need to be added for different file operations(Read, close, write etc) as part of tracing record.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7002
Test Plan: make check -j64
Reviewed By: anand1976
Differential Revision: D22127897
Pulled By: akankshamahajan15
fbshipit-source-id: 74cff58ce5661c9a3832dfaa52483f3b2d8565e0
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env
These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies. By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.
Tested both release and debug builds via Make and CMake for both static and shared libraries.
More work remains to clean up how the tools are built and remove some unnecessary dependencies. There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097
Reviewed By: riversand963
Differential Revision: D22463160
Pulled By: pdillinger
fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
Summary:
Some tests directly uses TmpDir() as temporary directory without adding any randomize factor. This would cause failures when tests run in parallel. Fix it by moving some of them to test::PerThreadDBPath()
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7030
Test Plan: Watch existing tests pass
Reviewed By: zhichao-cao
Differential Revision: D22224710
fbshipit-source-id: 28c9932fede0a4a64670e5b5fdb08f4fb5dccdd0
Summary:
It's useful to build RocksDB using a more recent clang version in CI. Add a CircleCI build and fix some issues with it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7025
Test Plan: See all tests pass.
Reviewed By: pdillinger
Differential Revision: D22215700
fbshipit-source-id: 914a729c2cd3f3ac4a627cc0ac58d4691dca2168
Summary:
EncryptEnv class is both declared and defined within env_encryption.cc. This makes it really tough to derive new classes from that base.
This branch moves declaration of the class to rocksdb/env_encryption.h. The change facilitates making new encryption modules (such as an upcoming openssl AES CTR pull request) possible / easy.
The only coding change was to add the EncryptEnv object to env_basic_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6830
Reviewed By: riversand963
Differential Revision: D21706593
Pulled By: ajkr
fbshipit-source-id: 64d2da95a1569ceeb9b1549c3bec5404cf4c89f0
Summary:
`Env::LowerThreadPoolCPUPriority` takes a new parameter `CpuPriority` to be able to lower to a specific priority such as `CpuPriority::kIdle`, previously, the priority is always lowered to `CpuPriority::kLow`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6969
Test Plan: unit test `EnvPosixTest::LowerThreadPoolCpuPriority` added to `env_test.cc`.
Reviewed By: siying
Differential Revision: D22011169
Pulled By: cheng-chang
fbshipit-source-id: 568878c24a924912e35cef00c552d4a63431cdf4
Summary:
When operation on an open file descriptor fails, we should close the file descriptor.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6936
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D21885458
Pulled By: riversand963
fbshipit-source-id: ba077a76b256a8537f21e22e4ec198f45390bf50
Summary:
When run */RunMany/* tests individually, e.g. ChrootEnvWithDirectIO/EnvPosixTestWithParam.RunMany/0, they hang. It's because they insert to background thread pool without initializing them. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6931
Test Plan: Run ChrootEnvWithDirectIO/EnvPosixTestWithParam.RunMany/0 by itself and see it passes.
Reviewed By: riversand963
Differential Revision: D21875603
fbshipit-source-id: 7f848174c1a660254a2b1f7e11cca5370793ba30
Summary:
This reverts commit 8d87e9cea1.
Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923
Reviewed By: pdillinger
Differential Revision: D21864799
fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
Summary:
GetTestDirectory implies a file system operation (it creates the
default test directory if missing), so it should be routed to
the FileSystem rather than the Env.
Also remove the GetTestDirectory implementation in the PosixEnv,
since it overrides GetTestDirectory in CompositeEnv making it
impossible to override with a custom FileSystem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6896
Reviewed By: cheng-chang
Differential Revision: D21868984
Pulled By: ajkr
fbshipit-source-id: e79bfef758d06dacef727c54b96abe62e78726fd
Summary:
x.size() -1 or y - 1 can overflow to an extremely large value when x.size() pr y is 0 when they are unsigned type. The end condition of i in the for loop will be extremely large, potentially causes segment fault. Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6902
Test Plan: pass make asan_check
Reviewed By: ajkr
Differential Revision: D21843767
Pulled By: zhichao-cao
fbshipit-source-id: 5b8b88155ac5a93d86246d832e89905a783bb5a1
Summary:
If both direct IO and IO uring are enabled, when IO uring returns partial result, we'll try to read the remaining part of the request, but the starting address/offset of the remaining part might not be aligned to the block size, in direct IO mode, the unaligned offset causes bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6853
Test Plan: run make check with both direct IO and IO uring enabled, this is covered by one of the continuous tests.
Reviewed By: anand1976
Differential Revision: D21603023
Pulled By: cheng-chang
fbshipit-source-id: 942f6a11ff21e1892af6c4464e02bab4c707787c
Summary:
The dynamic_cast in the filter benchmark causes release mode to fail due to
no-rtti. Replace with static_cast_with_check.
Signed-off-by: Derrick Pallas <derrick@pallas.us>
Addition by peterd: Remove unnecessary 2nd template arg on all static_cast_with_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6732
Reviewed By: ltamasi
Differential Revision: D21304260
Pulled By: pdillinger
fbshipit-source-id: 6e8eb437c4ca5a16dbbfa4053d67c4ad55f1608c
Summary:
In release mode, asserts are not compiled, so `r` is not used, causing compiler warnings.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6750
Test Plan: make check under release mode
Reviewed By: anand1976
Differential Revision: D21220365
Pulled By: cheng-chang
fbshipit-source-id: fd4afa9843d54af68c4da8660ec61549803e1167
Summary:
IsDirectory() is a common API to check whether a path is a regular file or
directory.
POSIX: call stat() and use S_ISDIR(st_mode)
Windows: PathIsDirectoryA() and PathIsDirectoryW()
HDFS: FileSystem.IsDirectory()
Java: File.IsDirectory()
...
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6711
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D21053520
Pulled By: riversand963
fbshipit-source-id: 680aadfd8ce982b63689190cf31b3145d5a89e27
Summary:
Compilation fails on systems that do not support O_CLOEXEC. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6695
Test Plan: compile without O_CLOEXEC support
Reviewed By: anand1976
Differential Revision: D21011850
Pulled By: cheng-chang
fbshipit-source-id: f1bf1cce2aa65c7d10b5a9613e941db30e928347
Summary:
Add `encrypt_data_time` and `decrypt_data_time` perf_context counters to time encryption/decryption time when `EnvEncryption` is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6596
Test Plan: CI
Reviewed By: anand1976
Differential Revision: D20678617
fbshipit-source-id: 7b57536143aa38509cde011f704de33382169e07
Summary:
This change updates PosixSequentialFile::Read to call clearerr()
before fread()ing again after an EINTR is returned on a previous
fread.
The original fix is from bd8f1ebb91.
Fixing https://github.com/facebook/rocksdb/issues/6509
Signed-off-by: phantomape <cxucheng@outlook.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6609
Reviewed By: zhichao-cao
Differential Revision: D20731482
Pulled By: riversand963
fbshipit-source-id: 7f1f3a1449077d5560f45c465a78d08633740ba0
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
Summary:
The current Env/FileSystem API separation has a couple of issues -
1. It requires the user to specify 2 options - ```Options::env``` and ```Options::file_system``` - which means they have to make code changes to benefit from the new APIs. Furthermore, there is a risk of accessing the same APIs in two different ways, through Env in the old way and through FileSystem in the new way. The two may not always match, for example, if env is ```PosixEnv``` and FileSystem is a custom implementation. Any stray RocksDB calls to env will use the ```PosixEnv``` implementation rather than the file_system implementation.
2. There needs to be a simple way for the FileSystem developer to instantiate an Env for backward compatibility purposes.
This PR solves the above issues and simplifies the migration in the following ways -
1. Embed a shared_ptr to the ```FileSystem``` in the ```Env```, and remove ```Options::file_system``` as a configurable option. This way, no code changes will be required in application code to benefit from the new API. The default Env constructor uses a ```LegacyFileSystemWrapper``` as the embedded ```FileSystem```.
1a. - This also makes it more robust by ensuring that even if RocksDB
has some stray calls to Env APIs rather than FileSystem, they will go
through the same object and thus there is no risk of getting out of
sync.
2. Provide a ```NewCompositeEnv()``` API that can be used to construct a
PosixEnv with a custom FileSystem implementation. This eliminates an
indirection to call Env APIs, and relieves the FileSystem developer of
the burden of having to implement wrappers for the Env APIs.
3. Add a couple of missing FileSystem APIs - ```SanitizeEnvOptions()``` and
```NewLogger()```
Tests:
1. New unit tests
2. make check and make asan_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6552
Reviewed By: riversand963
Differential Revision: D20592038
Pulled By: anand1976
fbshipit-source-id: c3801ad4153f96d21d5a3ae26c92ba454d1bf1f7
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.
Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334
Reviewed By: anand1976
Differential Revision: D19778960
Pulled By: riversand963
fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
Summary:
When `use_direct_reads` and `use_direct_writes` are `false`, `logical_sector_size_` inside various `*File` implementations are not actually used, so `GetLogicalBlockSize` does not necessarily need to be called for `logical_sector_size_`, just set a default page size.
This is a follow up PR for https://github.com/facebook/rocksdb/pull/6457.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6522
Test Plan: make check
Reviewed By: siying
Differential Revision: D20408885
Pulled By: cheng-chang
fbshipit-source-id: f2d3808f41265237e7fa2c0be9f084f8fa97fe3d
Summary:
In Linux, when reopening DB with many SST files, profiling shows that 100% system cpu time spent for a couple of seconds for `GetLogicalBufferSize`. This slows down MyRocks' recovery time when site is down.
This PR introduces two new APIs:
1. `Env::RegisterDbPaths` and `Env::UnregisterDbPaths` lets `DB` tell the env when it starts or stops using its database directories . The `PosixFileSystem` takes this opportunity to set up a cache from database directories to the corresponding logical block sizes.
2. `LogicalBlockSizeCache` is defined only for OS_LINUX to cache the logical block sizes.
Other modifications:
1. rename `logical buffer size` to `logical block size` to be consistent with Linux terms.
2. declare `GetLogicalBlockSize` in `PosixHelper` to expose it to `PosixFileSystem`.
3. change the functions `IOError` and `IOStatus` in `env/io_posix.h` to have external linkage since they are used in other translation units too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6457
Test Plan:
1. A new unit test is added for `LogicalBlockSizeCache` in `env/io_posix_test.cc`.
2. A new integration test is added for `DB` operations related to the cache in `db/db_logical_block_size_cache_test.cc`.
`make check`
Differential Revision: D20131243
Pulled By: cheng-chang
fbshipit-source-id: 3077c50f8065c0bffb544d8f49fb10bba9408d04
Summary:
When users fail to open a DB with file lock failure, it is sometimes hard for users to debug. We now include the time the lock is acquired and the thread ID that acquired the lock, to help users debug problems like this. Default Env's thread ID is used.
Since type of lockedFiles is changed, rename it to follow naming convention too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6507
Test Plan: Add a unit test and improve an existing test to validate the case.
Differential Revision: D20378333
fbshipit-source-id: 312fe0e9733fd1d1e9969c321b90ce523cf4708a
Summary:
MultiRead tests in env_test cannot simulate the io_uring case when queries need to be submitted in multiple rounds. Add a new unit test to cover up more requests per MultiRead
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6452
Test Plan: Run it and see it pass when liburing is enabled or not enabled.
Differential Revision: D20078924
fbshipit-source-id: 6cff7fe345a4c5aa47135186e6181bf00df02b68
Summary:
Make kPageSize extern const size_t (used in draft https://github.com/facebook/rocksdb/issues/6427)
Make kLitteEndian constexpr bool
Clarify a couple of comments
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6443
Test Plan: make check, CI
Differential Revision: D20044558
Pulled By: pdillinger
fbshipit-source-id: e0c5cc13229c82726280dc0ddcba4078346b8418
Summary:
The logic that handles io_uring partial results was wrong. Fix the logic by putting it into a queue and continue reading.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6441
Test Plan: Make sure this patch fixes the application test case where the bug was discovered; in env_test, add a unit test that simulates partial results and make sure the results are still correct.
Differential Revision: D20018616
fbshipit-source-id: 5398a7e34d74c26d52aa69dfd604e93e95d99c62
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
The DecreaseNumBgThreads test keeps failing on Windows in AppVeyor.
It fails because it depends on a timed wait for the tasks to be dequeued from the threadpool's internal queue, but within the specified time, the task might have not been scheduled onto the newly created threads.
https://github.com/facebook/rocksdb/pull/6232 tries to fix this by waiting for longer time to let the threads scheduled.
This PR tries to fix this by replacing the timed wait with a synchronization on the task's internal conditional variable.
When the number of threads increases, instead of guessing the time needed for the task to be scheduled, it directly blocks on the conditional variable until the task starts running.
But when thread number is reduced, it still does a timed wait, but this does not lead to the flakiness now, will try to remove these timed waits in a future PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6393
Test Plan: Wait to see whether AppVeyor tests pass.
Differential Revision: D19890928
Pulled By: cheng-chang
fbshipit-source-id: 4e56e4addf625c98c0876e62d9d57a6f0a156f76
Summary:
It's a minor refactoring. We have two ReadFileToString() but they are very similar. Make the one with Env argument calls the one with FS argument instead.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6366
Test Plan: Run all existing tests
Differential Revision: D19712332
fbshipit-source-id: 5ae6fabf6355938690d95cda52afd1f39e0a7823
Summary:
Some shadow warning shows up when using gcc 4.8. An example:
./utilities/blob_db/blob_compaction_filter.h: In constructor ‘rocksdb::blob_db::BlobIndexCompactionFilterFactoryBase::BlobIndexCompactionFilterFactoryBase(rocksdb::blob_db::lobDBImpl*, rocksdb::Env*, rocksdb::Statistics*)’:
./utilities/blob_db/blob_compaction_filter.h:121:7: error: declaration of ‘blob_db_impl’ shadows a member of 'this' [-Werror=shadow]
: blob_db_impl_(blob_db_impl), env_(_env), statistics_(_statistics) {}
^
Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6242
Test Plan: Build and see the warnings go away.
Differential Revision: D19217789
fbshipit-source-id: 8ef631941f23dab47a388e060adec24b72efd65e
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
ASAN reports:
internal_repo_rocksdb/repo:db_test - MultiThreaded/MultiThreadedDBTest.MultiThreaded/43: fatal
==2692739==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6130000500ca at pc 0x0000006be780 bp 0x7efef85ccd20 sp 0x7efef85cc4d0
[CONTEXT] === How to use this, how to get the raw stack trace, and more: fburl.com/ASAN ===
[CONTEXT] READ of size 331 at 0x6130000500ca thread T195
[CONTEXT] #0 db_test_bin+0x6be77f __interceptor_strlen.part.35
[CONTEXT] https://github.com/facebook/rocksdb/issues/1 internal_repo_rocksdb/repo/include/rocksdb/slice.h:55 rocksdb::Slice::Slice(char const*)
[CONTEXT] https://github.com/facebook/rocksdb/issues/2 internal_repo_rocksdb/repo/env/io_posix.cc:522 rocksdb::PosixRandomAccessFile::MultiRead(rocksdb::ReadRequest*, unsigned long)
I looked at env/io_posix.cc:522 but don't see a reason why the line needs to be there at all, because it is not used before overwritten. So it must be a line that is put there as a bug. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6135
Test Plan: Rerun the same test which passes after the fix. Run all the tests and make sure they all pass.
Differential Revision: D18880251
fbshipit-source-id: 3b84ac6a05b67b529c4202e0ceb4c047460f44f2
Summary:
db_stress_tool.cc now is a giant file. In order to main it easier to improve and maintain, break it down to multiple source files.
Most classes are turned into their own files. Separate .h and .cc files are created for gflag definiations. Another .h and .cc files are created for some common functions. Some test execution logic that is only loosely related to class StressTest is moved to db_stress_driver.h and db_stress_driver.cc. All the files are located under db_stress_tool/. The directory name is created as such because if we end it with either stress or test, .gitignore will ignore any file under it and makes it prone to issues in developements.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6134
Test Plan: Build under GCC7 with and without LITE on using GNU Make. Build with GCC 4.8. Build with cmake with -DWITH_TOOL=1
Differential Revision: D18876064
fbshipit-source-id: b25d0a7451840f31ac0f5ebb0068785f783fdf7d
Summary:
Right now, PosixRandomAccessFile::MultiRead() executes read requests in parallel. In this PR, it leverages I/O Uring library to run it in parallel, even when page cache is enabled. This function will fall back if the kernel version doesn't support it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5881
Test Plan: Run the unit test on a kernel version supporting it and make sure all tests pass, and run a unit test on kernel version supporting it and see it pass. Before merging, will also run stress test and see it passes.
Differential Revision: D17742266
fbshipit-source-id: e05699c925ac04fdb42379456a4e23e4ebcb803a
Summary:
Since we do not evict a file's blocks from block cache before that file
is deleted, we require a file's cache ID prefix is both unique and
non-reusable. However, the Windows functionality we were relying on only
guaranteed uniqueness. That meant a newly created file could be assigned
the same cache ID prefix as a deleted file. If the newly created file
had block offsets matching the deleted file, full cache keys could be
exactly the same, resulting in obsolete data blocks returned from cache
when trying to read from the new file.
We noticed this when running on FAT32 where compaction was writing out
of order keys due to reading obsolete blocks from its input files. The
functionality is documented as behaving the same on NTFS, although I
wasn't able to repro it there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5844
Test Plan:
we had a reliable repro of out-of-order keys on FAT32 that
was fixed by this change
Differential Revision: D17752442
fbshipit-source-id: 95d983f9196cf415f269e19293b97341edbf7e00
Summary:
This PR allows for the creation of custom env when using sst_dump. If
the user does not set options.env or set options.env to nullptr, then sst_dump
will automatically try to create a custom env depending on the path to the sst
file or db directory. In order to use this feature, the user must call
ObjectRegistry::Register() beforehand.
Test Plan (on devserver):
```
$make all && make check
```
All tests must pass to ensure this change does not break anything.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5845
Differential Revision: D17678038
Pulled By: riversand963
fbshipit-source-id: 58ecb4b3f75246d52b07c4c924a63ee61c1ee626
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
For our default block cache, each additional entry has extra memory overhead. It include LRUHandle (72 bytes currently) and the cache key (two varint64, file id and offset). The usage is not negligible. For example for block_size=4k, the overhead accounts for an extra 2% memory usage for the cache. The patch charging the cache for the extra usage, reducing untracked memory usage outside block cache. The feature is enabled by default and can be disabled by passing kDontChargeCacheMetadata to the cache constructor.
This PR builds up on https://github.com/facebook/rocksdb/issues/4258
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5797
Test Plan:
- Existing tests are updated to either disable the feature when the test has too much dependency on the old way of accounting the usage or increasing the cache capacity to account for the additional charge of metadata.
- The Usage tests in cache_test.cc are augmented to test the cache usage under kFullChargeCacheMetadata.
Differential Revision: D17396833
Pulled By: maysamyabandeh
fbshipit-source-id: 7684ccb9f8a40ca595e4f5efcdb03623afea0c6f
Summary:
Use delete to disable automatic generated methods instead of private, and put the constructor together for more clear.This modification cause the unused field warning, so add unused attribute to disable this warning.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5009
Differential Revision: D17288733
fbshipit-source-id: 8a767ce096f185f1db01bd28fc88fef1cdd921f3
Summary:
On older macOS like 10.10 we saw the following compiler error:
```
/go/src/github.com/cockroachdb/cockroach/c-deps/rocksdb/env/env_posix.cc:845:19:
error: use of undeclared identifier 'CLOCK_THREAD_CPUTIME_ID'
clock_gettime(CLOCK_THREAD_CPUTIME_ID, &ts);
^
```
According to mac's `man clock_gettime`: "These functions first appeared in Mac
OSX 10.12". So we should not try to compile it on earlier versions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5570
Test Plan:
verified it compiles now on 10.10. Also did some investigation to
ensure it does not cause regression on macOS 10.12+, although I do not
have access to such an environment to really test.
Differential Revision: D17322629
Pulled By: riversand963
fbshipit-source-id: e0a412223854f826b4d83e6d15c3739ff4620d7d
Summary:
Fixes https://github.com/facebook/rocksdb/issues/5734. By reading the code the assert don't quite make sense to me, since `dataSize` and `fileOffset` has no correlation. But my knowledge about `EncryptedEnv` is very limited.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5735
Test Plan:
run `ENCRYPTED_ENV=1 ./db_encryption_test`
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Differential Revision: D17133849
fbshipit-source-id: bb7262d308e5b2503c400b180edc252668df0ef0
Summary:
The ObjectRegistry class replaces the Registrar and NewCustomObjects. Objects are registered with the registry by Type (the class must implement the static const char *Type() method).
This change is necessary for a few reasons:
- By having a class (rather than static template instances), the class can be passed between compilation units, meaning that objects could be registered and shared from a dynamic library with an executable.
- By having a class with instances, different units could have different objects registered. This could be useful if, for example, one Option allowed for a dynamic library and one did not.
When combined with some other PRs (being able to load shared libraries, a Configurable interface to configure objects to/from string), this code will allow objects in external shared libraries to be added to a RocksDB image at run-time, rather than requiring every new extension to be built into the main library and called explicitly by every program.
Test plan (on riversand963's devserver)
```
$COMPILE_WITH_ASAN=1 make -j32 all && sleep 1 && make check
```
All tests pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5293
Differential Revision: D16363396
Pulled By: riversand963
fbshipit-source-id: fbe4acb615bfc11103eef40a0b288845791c0180
Summary:
Current PosixLogger performs IO operations using posix calls. Thus the
current implementation will not work for non-posix env. Created a new
logger class EnvLogger that uses env specific WritableFileWriter for IO operations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5491
Test Plan: make check
Differential Revision: D15909002
Pulled By: ggaurav28
fbshipit-source-id: 13a8105176e8e42db0c59798d48cb6a0dbccc965
Summary:
The usage of `AlignedBuffer` in env_encryption.cc writes and reads to/from the AlignedBuffer's internal buffer directly without going through AlignedBuffer's APIs (like `Append` and `Read`), causing encapsulation to break in some cases. The writes are especially problematic as after the data is written to the buffer (directly using either memmove or memcpy), the size of the buffer is not updated ... causing the AlignedBuffer to lose track of the encapsulated buffer's current size.
Fixed this by updating the buffer size after every write.
Todo for later:
Add an overloaded method to AlignedBuffer to support a memmove in addition to a memcopy. Encryption env does a memmove, and hence I couldn't switch to using `AlignedBuffer.Append()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5396
Test Plan: `make check`
Differential Revision: D15764756
Pulled By: sagar0
fbshipit-source-id: 2e24b52bd3b4b5056c5c1da157f91ddf89370183
Summary:
The changes in 8272a6de57 were untested with `USE_HDFS=1`. There were a couple compiler errors. This PR fixes them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5444
Test Plan:
```
$ EXTRA_LDFLAGS="-L/tmp/hadoop-3.1.2/lib/native/" EXTRA_CXXFLAGS="-I/tmp/hadoop-3.1.2/include" USE_HDFS=1 make -j12 check
```
Differential Revision: D15885009
fbshipit-source-id: 2a0a63739e0b9a2819b461ad63ce1292c4833fe2
Summary:
`sync_file_range` returns `ENOSYS` on Windows Subsystem for Linux even
when using a supposedly supported filesystem like ext4. To handle this
case we can do a dynamic check that a no-op `sync_file_range`
invocation, which is accomplished by passing zero for the `flags`
argument, succeeds.
Also I rearranged the function and comments to hopefully make it more
easily understandable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5416
Differential Revision: D15807061
fbshipit-source-id: d31d94e1f228b7850ea500e6199f8b5daf8cfbd3
Summary:
This affects some TSAN builds:
env/env_test.cc: In member function ‘virtual void rocksdb::EnvPosixTestWithParam_MultiRead_Test::TestBody()’:
env/env_test.cc:1126:76: error: type qualifiers ignored on cast result type [-Werror=ignored-qualifiers]
auto data = NewAligned(kSectorSize * 8, static_cast<const char>(i + 1));
^
env/env_test.cc:1154:77: error: type qualifiers ignored on cast result type [-Werror=ignored-qualifiers]
auto buf = NewAligned(kSectorSize * 8, static_cast<const char>(i*2 + 1));
^
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5432
Differential Revision: D15727277
Pulled By: ltamasi
fbshipit-source-id: dc0e687b123e7c4d703ccc0c16b7167e07d1c9b0
Summary:
Previous code has a warning when compile with tsan, leading to an error since we have -Werror.
Compilation result
```
In file included from ./env/env_chroot.h:12,
from env/env_test.cc:40:
./include/rocksdb/env.h: In instantiation of ‘rocksdb::Status rocksdb::DynamicLibrary::LoadFunction(const string&, std::function<T>*) [with T = void*(void*, const char*); std::__cxx11::string = std::__cxx11::basic_string<char>]’:
env/env_test.cc:260:5: required from here
./include/rocksdb/env.h:1010:17: error: cast between incompatible function types from ‘rocksdb::DynamicLibrary::FunctionPtr’ {aka ‘void* (*)()’} to ‘void* (*)(void*, const char*)’ [-Werror=cast-function-type]
*function = reinterpret_cast<T*>(ptr);
^~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
make: *** [env/env_test.o] Error 1
```
It also has another error reported by clang
```
env/env_posix.cc:141:11: warning: Value stored to 'err' during its initialization is never read
char* err = dlerror(); // Clear any old error
^~~ ~~~~~~~~~
1 warning generated.
```
Test plan (on my devserver).
```
$make clean
$OPT=-g ROCKSDB_FBCODE_BUILD_WITH_PLATFORM007=1 COMPILE_WITH_TSAN=1 make -j32
$
$make clean
$USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j1 analyze
```
Both should pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5414
Differential Revision: D15637315
Pulled By: riversand963
fbshipit-source-id: 8e307483761019a4d5998cab92d49516d7edffbf
Summary:
Define the Env:: MultiRead() method to allow callers to request multiple block reads in one shot. The underlying Env implementation can parallelize it if it chooses to in order to reduce the overall IO latency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5311
Differential Revision: D15502172
Pulled By: anand1976
fbshipit-source-id: 2b228269c2e11b5f54694d6b2bb3119c8a8ce2b9
Summary:
This change adds a Dynamic Library class to the RocksDB Env. Dynamic libraries are populated via the Env::LoadLibrary method.
The addition of dynamic library support allows for a few different features to be developed:
1. The compression code can be changed to use dynamic library support. This would allow RocksDB to determine at run-time what compression packages were installed. This change would eliminate the need to make sure the build-time and run-time environment had the same library set. It would also simplify some of the Java build issues (where it attempts to build and include various packages inside the RocksDB jars).
2. Along with other features (to be provided in a subsequent PR), this change would allow code/configurations to be added to RocksDB at run-time. For example, the build system includes code for building an "rados" environment and adding "Cassandra" features. Instead of these extensions being built into the base RocksDB code, these extensions could be loaded at run-time as required/appropriate, either by configuration or explicitly.
We intend to push out other changes in support of the extending RocksDB at run-time via configurations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5281
Differential Revision: D15447613
Pulled By: riversand963
fbshipit-source-id: 452cd4f54511c0bceee18f6d9d919aae9fd25fef
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
This is a workaround for the issue described in #5169.
It has been tested on a database with very large values, but not dedicated test has been added to the code base.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5213
Differential Revision: D15243116
Pulled By: siying
fbshipit-source-id: e0c226a6cd71a60924dcd7ce7af74abcb4054484
Summary:
The existing implementation does not guarantee bytes reach disk every `bytes_per_sync` when writing SST files, or every `wal_bytes_per_sync` when writing WALs. This can cause confusing behavior for users who enable this feature to avoid large syncs during flush and compaction, but then end up hitting them anyways.
My understanding of the existing behavior is we used `sync_file_range` with `SYNC_FILE_RANGE_WRITE` to submit ranges for async writeback, such that we could continue processing the next range of bytes while that I/O is happening. I believe we can preserve that benefit while also limiting how far the processing can get ahead of the I/O, which prevents huge syncs from happening when the file finishes.
Consider this `sync_file_range` usage: `sync_file_range(fd_, 0, static_cast<off_t>(offset + nbytes), SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE)`. Expanding the range to start at 0 and adding the `SYNC_FILE_RANGE_WAIT_BEFORE` flag causes any pending writeback (like from a previous call to `sync_file_range`) to finish before it proceeds to submit the latest `nbytes` for writeback. The latest `nbytes` are still written back asynchronously, unless processing exceeds I/O speed, in which case the following `sync_file_range` will need to wait on it.
There is a second change in this PR to use `fdatasync` when `sync_file_range` is unavailable (determined statically) or has some known problem with the underlying filesystem (determined dynamically).
The above two changes only apply when the user enables a new option, `strict_bytes_per_sync`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5183
Differential Revision: D14953553
Pulled By: siying
fbshipit-source-id: 445c3862e019fb7b470f9c7f314fc231b62706e9
Summary:
Change the behavior of OptimizeForSmallDb() so that it is less likely to go out of memory.
Change the behavior of OptimizeForPointLookup() to take advantage of the new memtable whole key filter, and move away from prefix extractor as well as hash-based indexing, as they are prone to misuse.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5165
Differential Revision: D14880709
Pulled By: siying
fbshipit-source-id: 9af30e3c9e151eceea6d6b38701a58f1f9fb692d
Summary:
This fix should help reading from encrypted files if the file-to-be-read
is smaller than expected. For example, when using the encrypted env and
making it read a journal file of exactly 0 bytes size, the encrypted env
code crashes with SIGSEGV in its Decrypt function, as there is no check
if the read attempts to read over the file's boundaries (as specified
originally by the `dataSize` parameter).
The most important problem this patch addresses is however that there is
no size underlow check in `CTREncryptionProvider::CreateCipherStream`:
The stream to be read will be initialized to a size of always
`prefix.size() - (2 * blockSize)`. If the prefix however is smaller than
twice the block size, this will obviously assume a _very_ large stream
and read over the bounds. The patch adds a check here as follows:
// If the prefix is smaller than twice the block size, we would below read a
// very large chunk of the file (and very likely read over the bounds)
assert(prefix.size() >= 2 * blockSize);
if (prefix.size() < 2 * blockSize) {
return Status::Corruption("Unable to read from file " + fname + ": read attempt would read beyond file bounds");
}
so embedders can catch the error in their release builds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5160
Differential Revision: D14834633
Pulled By: sagar0
fbshipit-source-id: 47aa39a6db8977252cede054c7eb9a663b9a3484
