Summary:
The current 10 millisecond waiting for test results may not be sufficient in some test environments. Increase it to 60 seconds and check the results for every 1 milliseond.
Already reviewed: https://reviews.facebook.net/D65457
Closes https://github.com/facebook/rocksdb/pull/1437
Differential Revision: D4099443
Pulled By: siying
fbshipit-source-id: cf1f205
Summary:
A bug that tailingIterator->Seek(target) skips records.
I think the bug is in the SeekInternal starting at lines 387:
search_left_bound > search_right_bound
There are only 2 cases this can happen:
(1) target key is smaller than left most file
(2) target key is larger than right most file
The comment is wrong, there is another possibility that at the higher level there is a big gap such that the file in the lower level fits completely in the gap and then
indexer->GetNextLevelIndex returns search_left_bound > search_right_bound I think pointing on the files after and before the gap.
details: https://github.com/facebook/rocksdb/issues/1372
fixed this bug with test case added.
Closes https://github.com/facebook/rocksdb/pull/1436
Reviewed By: IslamAbdelRahman
Differential Revision: D4099313
Pulled By: lightmark
fbshipit-source-id: 6a675b3
Summary:
Currently, we don't use options.compression_per_level[0] as the compression style for L0 compression type, unless it is None. This behavior
doesn't look like on purpose. This diff will make sure L0 compress using the style of options.compression_per_level[0].
Reviewed and accepted in: https://reviews.facebook.net/D65607
Closes https://github.com/facebook/rocksdb/pull/1435
Differential Revision: D4099368
Pulled By: siying
fbshipit-source-id: cfbbdcd
Summary: As offline discussion with Siying, revert this since it has bug with seek.
Test Plan: make check -j64
Reviewers: yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65559
Summary:
The verification condition of the test DBTest.RepeatedWritesToSameKey doesn't hold anymore after 3ce3bb3da2.
Disable the test for now before we find a way to replace it.
Test Plan: Run the test and make sure it is disabled.
Summary: Siying suggested to keep old code for normal mode prev() for safety
Test Plan: make check -j64
Reviewers: yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65439
Summary: Using real clock causes failures of DBSSTTest.RateLimitedDelete in some cases. Turn away from the real time. Use fake time instead.
Test Plan: Run the tests and all existing tests.
Reviewers: yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65145
Summary:
The previous fix of reappearing of a deleted row 0ce258f9b3 missed a corner case, which can be reproduced using test CompactionPickerTest.OverlappingUserKeys7. Consider such an example:
input level file: 1[B E] 2[F H]
output level file: 3[A C] 4[D I] 5[I K]
First file 2 is picked, which overlaps to file 4. 4 expands to 5. Now the all range is [D K] with 2 output level files. When we try to expand that, [D K] overlaps with file 1 and 2 in the input level, and 1 and 2 overlaps with 3 and 4 in the output level. So we end up with picking 3 and 4 in the output level. Without expanding, it also has 2 files, so we determine the output level doesn't change, although they are the different two files.
The fix is to expand the output level files after we picked 3 and 4. In that case, there will be three output level files so we will abort the expanding.
I also added two unit tests related to marked_for_compaction and being_compacted. They have been passing though.
Test Plan: Run the new unit test, as well as all other tests.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65373
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.
Test Plan: make all check -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65121
Summary:
Changes in the diff
API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API
Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers
Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob
Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)
Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: jkedgar, hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65061
Summary: DBTestUniversalCompaction.UniversalCompactionTrivialMoveTest2 verifies non-trivial move is not triggered if we load data in sequential order. However, if there are multiple compaction threads, this conditon may not hold. Restrict the running condition to 1 compaction thread to make the test more robust.
Test Plan: Run the test and make sure at least it doesn't regress normally.
Reviewers: yhchiang, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65277
Summary: Some tests in column_family_test depend on functions that are not available in LITE build, which sometimes cause flakiness. Disable them.
Test Plan: Run those tests in LITE build.
Reviewers: yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65271
Summary:
reland https://reviews.facebook.net/D62523
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: sdong, yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65211
Summary: we should not split file on level 0 in compaction because it will fail the following verification of seqno order on level 0
Test Plan: check with filldeterministic in db_bench
Reviewers: yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65193
Summary: in rocksdb::DBIter::FindValueForCurrentKey(), last_not_merge_type could also be SingleDelete() which is omitted
Test Plan: db_iter_test
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65187
Summary: SamePrefixTest.InDomainTest may fail if the previous run of some test cases in prefix_test fail.
Test Plan: Run the test
Reviewers: lightmark, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65163
Summary:
MyRocks hit a regression, @mung generated perf reports showing that the reason is the cost of calling `GetDBOptions()` inside `GetFromBatchAndDB()`
This diff avoid calling `GetDBOptions` and use the `ImmutableDBOptions` instead
Test Plan: make check -j64
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, mung
Differential Revision: https://reviews.facebook.net/D65151
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
Summary:
Previously the WAL files that were avoided during recovery would never
be considered for deletion. That was because alive_log_files_ was only
populated when log files are created. This diff further populates
alive_log_files_ with existing log files that aren't flushed during recovery,
such that FindObsoleteFiles() can find them later.
Depends on D64053.
Test Plan: new unit test, verifies it fails before this change and passes after
Reviewers: sdong, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64059
Summary:
Previously we have an assertion which triggers when we issue Merges
after a single delete. However, merges after a single delete are
unrelated to that single delete. Thus this behavior should be
allowed.
This will address a flakyness of db_stress.
Test Plan: db_stress
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64923
Summary:
Issue scenario:
(1) We have 3 files in L1 and we issue a compaction that will compact them into 1 file in L2
(2) While compaction (1) is running, we flush a file into L0 and trigger another compaction that decide to move this file to L1 and then move it again to L2 (this file don't overlap with any other files)
(3) compaction (1) finishes and install the file it generated in L2, but this file overlap with the file we generated in (2) so we break the LSM consistency
Looks like this issue can be triggered by using non-exclusive manual compaction or AddFile()
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: hermanlee4, jkedgar, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D64947
Summary: I accidentally left out these changes from my commit of D64053 due to
messing up the merge conflict resolution.
Test Plan: ./db_wal_test
Reviewers:
Subscribers:
Tasks:
Blame Revision: D64053
Summary:
This reverts commit 9e4aa798c3,
which doesn't handle all cases (see inline comment).
I reimplemented the logic as suggested in the initial PR: https://github.com/facebook/rocksdb/pull/1313.
This approach has two benefits:
- All the parsing/filtering of full_scan_candidate_files is kept together in PurgeObsoleteFiles.
- We only need to check whether log file is recycled in one place where we've already determined it's a log file
Test Plan:
new unit test, verified fails before the original fix, still passes
now.
Reviewers: IslamAbdelRahman, yiwu, sdong
Reviewed By: yiwu, sdong
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64053
Summary:
1) The previous solution for Prev() prefix support is not clean.
Since I add api SeekForPrev(), now the Prev() can be symmetric to Next().
and we do not need SeekToLast() to be called in Prev() any more.
Also, Next() will Seek(prefix_seek_key_) to solve the problem of possible inconsistency between db_iter and merge_iter when
there is merge_operator. And prefix_seek_key is only refreshed when change direction to forward.
2) This diff also solves the bug of Iterator::SeekToLast() with iterate_upper_bound_ with prefix extractor.
add test cases for the above two cases.
There are some tests for the SeekToLast() in Prev(), I will clean them later.
Test Plan: make all check
Reviewers: IslamAbdelRahman, andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63933
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode
Test Plan:
make check -j64
make release
Reviewers: lightmark, sdong, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64701
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
Summary:
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: andrewkr, yhchiang, yiwu, sdong
Reviewed By: sdong
Subscribers: hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62523
Summary:
- Store range tombstones in a separate MemTableRep instantiated with ColumnFamilyOptions::memtable_factory
- MemTable::NewRangeTombstoneIterator() returns a MemTableIterator over the separate MemTableRep
- Part of the read path is not implemented yet (i.e., MemTable::Get())
Test Plan: see unit tests
Reviewers: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62217
Summary:
Fix the conflict bug between AddFile() and CompactRange() by
- Make sure that no AddFile calls are running when asking CompactionPicker to pick compaction for manual compaction
- If AddFile() run after we pick the compaction for the manual compaction it will be aware of it since we will add the manual compaction to running_compactions_ after picking it
This will solve these 2 scenarios
- If AddFile() is running, we will wait for it to finish before we pick a compaction for the manual compaction
- If we already picked a manual compaction and then AddFile() started ... we ensure that it never ingest a file in a level that will overlap with the manual compaction
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64449
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary: We didn't recompute compaction score on SetOptions, and end up not having compaction if no flush happens afterward. The PR fixing it.
Test Plan: See unit test.
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64167
Summary:
Since AddFile unlock/lock the mutex inside LogAndApply() we need to ensure that during this period other compactions cannot run since such compactions are not aware of the file we are ingesting and could create a compaction that overlap wit this file
this diff add
- WaitForAddFile() call that will ensure that no AddFile() calls are being processed right now
- Call `WaitForAddFile()` in 3 locations
-- When doing manual Compaction
-- When starting automatic Compaction
-- When doing CompactFiles()
Test Plan: unit test
Reviewers: lightmark, yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64383
Summary: we should not call ShouldStopBefore() in compaction when the compaction targets level 0. Otherwise, CheckConsistency will fail the assertion of seq number check on level 0.
Test Plan:
make all check -j64
I also manully test that using db_bench to compact files to level 0. Without this line change, the assertion files and multiple files are generated on level 0 after compaction.
Reviewers: yhchiang, andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64269
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
Revert the behavior where we don't read sequence id from WAL, but increase it as we replay the log. We still keep the behave for 2PC for now but will fix later.
This change fixes github issue 1339, where some writes come with WAL disabled and we may recover records with wrong sequence id.
Test Plan: Added unit test.
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64275
Summary: add ColumnFamilyHandleDeletionStarted listener which can be called when user deletes handler.
Test Plan: ./listener_test
Reviewers: yiwu, IslamAbdelRahman, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60717
Summary:
Report more information about the ingested files in CF InternalStats
- Total files
- Total L0 files
- Total keys
There was also noticed that we were reporting files that failed to ingest, fix this bug
Test Plan: print stats in tests
Reviewers: sdong, andrewkr, lightmark
Reviewed By: lightmark
Subscribers: jkedgar, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D63039
Summary:
Mitigate regression bug of options.max_successive_merges hit during DB Recovery
For https://reviews.facebook.net/D62625
Test Plan: make all check
Reviewers: horuff, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62655
