Summary:
When ConcurrentTaskLimiter is enabled and there are too many outstanding compactions, BackgroundCompaction returns Status::Busy(), which shouldn't be treat as compaction failure.
This caused performance issue when outstanding compactions reached the limit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7739
Reviewed By: cheng-chang
Differential Revision: D25508319
Pulled By: ltamasi
fbshipit-source-id: 3b181b16ada0ca3393cfa3a7412985764e79c719
Summary:
sst file number in corruption error would be very useful for debugging
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7767
Reviewed By: zhichao-cao
Differential Revision: D25485872
Pulled By: jay-zhuang
fbshipit-source-id: 67315b582cedeefbce6676015303ebe5bf6526a3
Summary:
The patch adds initial support for reading blobs to the batched `MultiGet` API.
The current implementation simply retrieves the blob values as the blob indexes
are encountered; that is, reads from blob files are currently not batched. (This
will be optimized in a separate phase.) In addition, the patch removes some dead
code related to BlobDB from the batched `MultiGet` implementation, namely the
`is_blob` / `is_blob_index` flags that are passed around in `DBImpl` and `MemTable` /
`MemTableListVersion`. These were never hooked up to anything and wouldn't
work anyways, since a single flag is not sufficient to communicate the "blobness"
of multiple key-values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7766
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D25479290
Pulled By: ltamasi
fbshipit-source-id: 7aba2d290e31876ee592bcf1adfd1018713a8000
Summary:
Deprecate CalculateNumEntry and replace with
ApproximateNumEntries (better name) using size_t instead of int and
uint32_t, to minimize confusing casts and bad overflow behavior
(possible though probably not realistic). Bloom sizes are now explicitly
capped at max size supported by implementations: just under 4GiB for
fv=5 Bloom, and just under 512MiB for fv<5 Legacy Bloom. This
hardening could help to set up for fuzzing.
Also, since RocksDB only uses this information as an approximation
for trying to hit certain sizes for partitioned filters, it's more important
that the function be reasonably fast than for it to be completely
accurate. It's hard enough to be 100% accurate for Ribbon (currently
reversing CalculateSpace) that adding optimize_filters_for_memory
into the mix is just not worth trying to be 100% accurate for num
entries for bytes.
Also:
- Cleaned up filter_policy.h to remove MSVC warning handling and
potentially unsafe use of exception for "not implemented"
- Correct the number of entries limit beyond which current Ribbon
implementation falls back on Bloom instead.
- Consistently use "num_entries" rather than "num_entry"
- Remove LegacyBloomBitsBuilder::CalculateNumEntry as it's essentially
obsolete from general implementation
BuiltinFilterBitsBuilder::CalculateNumEntries.
- Fix filter_bench to skip some tests that don't make sense when only
one or a small number of filters has been generated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7726
Test Plan:
expanded existing unit tests for CalculateSpace /
ApproximateNumEntries. Also manually used filter_bench to verify Legacy and
fv=5 Bloom size caps work (much too expensive for unit test). Note that
the actual bits per key is below requested due to space cap.
$ ./filter_bench -impl=0 -bits_per_key=20 -average_keys_per_filter=256000000 -vary_key_count_ratio=0 -m_keys_total_max=256 -allow_bad_fp_rate
...
Total size (MB): 511.992
Bits/key stored: 16.777
...
$ ./filter_bench -impl=2 -bits_per_key=20 -average_keys_per_filter=2000000000 -vary_key_count_ratio=0 -m_keys_total_max=2000
...
Total size (MB): 4096
Bits/key stored: 17.1799
...
$
Reviewed By: jay-zhuang
Differential Revision: D25239800
Pulled By: pdillinger
fbshipit-source-id: f94e6d065efd31e05ec630ae1a82e6400d8390c4
Summary:
Uncommon bug seen by ASAN with
ColumnFamilyTest.LiveIteratorWithDroppedColumnFamily, if the last two
references to a ColumnFamilyData are both SuperVersions (during
InstallSuperVersion). The fix is to use UnrefAndTryDelete even in
SuperVersion::Cleanup but with a parameter to avoid re-entering Cleanup
on the same SuperVersion being cleaned up.
ColumnFamilyData::Unref is considered unsafe so removed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7749
Test Plan: ./column_family_test --gtest_filter=*LiveIter* --gtest_repeat=100
Reviewed By: jay-zhuang
Differential Revision: D25354304
Pulled By: pdillinger
fbshipit-source-id: e78f3a3f67c40013b8432f31d0da8bec55c5321c
Summary:
min_wal_number_to_keep should not be decreasing, if it does not increase, then there is no need to log the WAL obsoletions in MANIFEST since a previous one has been logged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7765
Test Plan: watch existing tests and stress tests to pass
Reviewed By: pdillinger
Differential Revision: D25462542
Pulled By: cheng-chang
fbshipit-source-id: 0085fcb6edf5cf2b0fc32f9932a7566f508768ff
Summary:
Prefer to use keyword args rather than positional args for Buck rules. This appears to be the only remaining instance for `custom_unittest`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7760
Test Plan: Search for other instances of `custom_unittest` without `name`
Reviewed By: cheng-chang
Differential Revision: D25439887
Pulled By: mzlee
fbshipit-source-id: 518c541a5c01207c7b0c1f7322addf5cc4f09f92
Summary:
Some clients do not close their iterators until after the transaction finishes. To handle this case, we will invalidate any iterators on transaction clear.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7733
Reviewed By: cheng-chang
Differential Revision: D25261158
Pulled By: lth
fbshipit-source-id: b91320f00c54cbe0e6882b794b34f3bb5640dbc0
Summary:
When two phase commit is enabled, `VersionSet::min_log_number_to_keep_2pc` is set during flush.
But when a new MANIFEST is created, the `min_log_number_to_keep_2pc` is not carried over to the new MANIFEST. So if a new MANIFEST is created and then DB is reopened, the `min_log_number_to_keep_2pc` will be lost. This may cause DB recovery errors.
The bug is reproduced in a new unit test in `version_set_test.cc`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7747
Test Plan: The new unit test in `version_set_test.cc` should pass.
Reviewed By: jay-zhuang
Differential Revision: D25350661
Pulled By: cheng-chang
fbshipit-source-id: eee890d5b19f15769069670692e270ae31044ece
Summary:
Ensure that when direct IO is enabled and a compressed block cache is
configured, MultiGet inserts compressed data blocks into the compressed
block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7756
Test Plan: Add unit test to db_basic_test
Reviewed By: cheng-chang
Differential Revision: D25416240
Pulled By: anand1976
fbshipit-source-id: 75d57526370c9c0a45ff72651f3278dbd8a9086f
Summary:
If WAL tracking was enabled, then disabled during reopen, the previously tracked WALs should be removed from MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7757
Test Plan: a new unit test `DBBasicTest.DisableTrackWal` is added.
Reviewed By: jay-zhuang
Differential Revision: D25410508
Pulled By: cheng-chang
fbshipit-source-id: 9d8d9e665066135930a7c1035bb8c2f68bded6a0
Summary:
Execute randomly generated operations on both a DB and a std::map,
then reopen the DB and make sure that iterating the DB produces the
same key-value pairs as iterating through the std::map.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7762
Test Plan: cd fuzz && make db_map_fuzzer && ./db_map_fuzzer
Reviewed By: pdillinger
Differential Revision: D25437485
Pulled By: cheng-chang
fbshipit-source-id: 3a93f7efd046b194193e45d2ab1ad81565510781
Summary:
Currently, when a WAL becomes obsolete after flushing, if VersionSet::WalSet does not contain the WAL, we do not track the WAL obsoletion event in MANIFEST.
But consider this case:
* WAL 10 is synced, a VersionEdit is LogAndApplied to MANIFEST to log this WAL addition event, but the VersionEdit is not applied to WalSet yet since its corresponding ManifestWriter is still pending in the write queue;
* Since the above ManifestWriter is blocking, the LogAndApply will block on a conditional variable and release the db mutex, so another LogAndApply can proceed to enqueue other VersionEdits concurrently;
* Now flush happens, and WAL 10 becomes obsolete, although WalSet does not contain WAL 10 yet, we should call LogAndApply to enqueue a VersionEdit to indicate the obsoletion of WAL 10;
* otherwise, when the queued edit indicating WAL 10 addition is logged to MANIFEST, and DB crashes and reopens, the WAL 10 might have been removed from disk, but it still exists in MANIFEST.
This PR changes the behavior to: always `LogAndApply` any WAL addition or obsoletion event, without considering the order issues caused by concurrency, but when applying the edits to `WalSet`, do not add the WALs if they are already obsolete. In this approach, the logical events of WAL addition and obsoletion are always tracked in MANIFEST, so we can inspect the MANIFEST and know all the previous WAL events, but we choose to ignore certain events due to the concurrency issues such as the case above, or the case in https://github.com/facebook/rocksdb/pull/7725.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7759
Test Plan: make check
Reviewed By: pdillinger
Differential Revision: D25423089
Pulled By: cheng-chang
fbshipit-source-id: 9cb9a7fbc1875bf954f2a42f9b6cfd6d49a7b21c
Summary:
To be used for implementing Range Locking.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7753
Reviewed By: zhichao-cao
Differential Revision: D25378980
Pulled By: cheng-chang
fbshipit-source-id: 801a9c5cd92a84654ca2586b73e8f69001e89320
Summary:
To build on FreeBSD, arch_ppc_probe needs to be adapted to FreeBSD.
Since FreeBSD uses elf_aux_info as an getauxval equivalent, use it and include necessary headers:
- machine/cpu.h for PPC_FEATURE2_HAS_VEC_CRYPTO,
- sys/auxv.h for elf_aux_info,
- sys/elf_common.h for AT_HWCAP2.
elf_aux_info isn't checked for being available, because it's available since FreeBSD 12.0. rocksdb assumes using Clang on FreeBSD, but powerpc* platforms switch to Clang only since 13.0.
This patch makes rocksdb build on FreeBSD on powerpc64 and powerpc64le platforms.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7732
Reviewed By: ltamasi
Differential Revision: D25399194
Pulled By: pdillinger
fbshipit-source-id: 9c905147d75f98cd2557dd2f86a940b8e6c5afcd
Summary:
Consider the case:
1. All column families are flushed, so all WALs become obsolete, but no WAL is removed from disk yet because the removal is asynchronous, a VersionEdit is written to MANIFEST indicating that WALs before a certain WAL number are obsolete, let's say this number is 3;
2. `SyncWAL` is called, so all the on-disk WALs are synced, and if track_and_verify_wal_in_manifest=true, the WALs will be tracked in MANIFEST, let's say the WAL numbers are 1 and 2;
3. DB crashes;
4. During DB recovery, when replaying MANIFEST, we first see that WAL with number < 3 are obsolete, then we see that WAL 1 and 2 are synced, so according to current implementation of `WalSet`, the `WalSet` will be recovered to include WAL 1 and 2;
5. WAL 1 and 2 are asynchronously deleted from disk, then the WAL verification algorithm fails with `Corruption: missing WAL`.
The above case is reproduced in a new unit test `DBBasicTestTrackWal::DoNotTrackObsoleteWal`.
The fix is to maintain the upper bound of the obsolete WAL numbers, any WAL with number less than the maintained number is considered to be obsolete, so shouldn't be tracked even if they are later synced. The number is maintained in `WalSet`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7725
Test Plan:
1. a new unit test `DBBasicTestTrackWal::DoNotTrackObsoleteWal` is added.
2. run `make crash_test` on devserver.
Reviewed By: riversand963
Differential Revision: D25238914
Pulled By: cheng-chang
fbshipit-source-id: f5dccd57c3d89f19565ec5731f2d42f06d272b72
Summary:
This PR removes a nested loop inside ProcessManifestWrites. The new
implementation has the same behavior as the old code with simpler logic
and lower complexity.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7751
Test Plan:
make check
Run make crash_test on devserver and succeeds 3 times.
Reviewed By: ltamasi
Differential Revision: D25363526
Pulled By: riversand963
fbshipit-source-id: 27e681949dacd7501a752e5e517b9e85b54ccb2e
Summary:
This PR has two commits:
1. Modify the code to allow different Lock Managers (of any kind) to be used. It is implied that a LockManager uses its own custom LockTracker.
2. Add definitions for Range Locking (class Endpoint and GetRangeLock() function.
cheng-chang, is this what you've had in mind (should the PR have both item 1 and item 2?)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7443
Reviewed By: zhichao-cao
Differential Revision: D24123172
Pulled By: cheng-chang
fbshipit-source-id: c6548ad6d4cc3c25f68d13b29147bc6fdf357185
Summary:
This change eliminates the need for a lot of the PermitUncheckedError calls on return from ErrorHandler methods. The calls are no longer needed as the status is returned as a reference rather than a copy. Additionally, this means that the originating status (recovery_error_, bg_error_) is not cleared implicitly as a result of calling one of these methods.
For this class, I do not know if the proper behavior should be to call PermitUncheckedError in the destructor or if the checked state should be cleared when the status is cleared. I did tests both ways. Without the code in the destructor, the status will need to be cleared in at least some of the places where it is set to OK. When running tests, I found no instances where this class was destructed with a non-OK, non-checked Status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7539
Reviewed By: anand1976
Differential Revision: D25340565
Pulled By: pdillinger
fbshipit-source-id: 1730c035c81a475875ea745226112030ec25136c
Summary:
`googletest` uses exceptions to communicate assertion failures when
`GTEST_THROW_ON_FAILURE` is set, which does not go well with
`std::thread`s, since an exception escaping the top-level function of an
`std::thread` object or an `std::thread` getting destroyed without
having been `join`ed or `detach`ed first results in a call to
`std::terminate`. The patch fixes this by moving the `Status` assertions
of background operations in `ExternalSstFileTest.PickedLevelBug` to the
main thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7754
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D25383808
Pulled By: ltamasi
fbshipit-source-id: 32fb2721e5169ec898d218900bc0d83eead45d03
Summary:
This PR adds a fuzzer to the project and infrastructure to integrate Rocksdb with OSS-Fuzz. OSS-Fuzz is a service run by Google that performs continuous fuzzing of important open source projects. The LevelDB project is also in being fuzzed by OSS-Fuzz (https://github.com/google/oss-fuzz/tree/master/projects/leveldb). Essentially, OSS-Fuzz will perform the fuzzing for you and email you bug reports, coverage reports etc. All we need is a set of email addresses that will receive this information.
For cross-referencing, the PR that adds the OSS-Fuzz logic is here: https://github.com/google/oss-fuzz/pull/4642
The `db_fuzzer` of the PR performs stateful fuzzing of Rocksdb by calling a sequence of Rockdb's APIs with random input in each fuzz iteration. Each fuzz iteration, thus, creates a new instance of Rocksdb and operates on this given instance. The goal is to test diverse states of Rocksdb and ensure no state lead to error conditions, e.g. memory corruption vulnerabilities.
The fuzzer is similar (although more complex) to the fuzzer that is currently being used to analyse Leveldb (https://github.com/google/oss-fuzz/blob/master/projects/leveldb/fuzz_db.cc)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7674
Reviewed By: pdillinger
Differential Revision: D25238536
Pulled By: cheng-chang
fbshipit-source-id: 610331c49a77eb68d3b1d7d5ef1b0ce230ac0630
Summary:
Handle misuse of snprintf return value to avoid Out of bound
read/write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7686
Test Plan: make check -j64
Reviewed By: riversand963
Differential Revision: D25030831
Pulled By: akankshamahajan15
fbshipit-source-id: 1a1d181c067c78b94d720323ae00b79566b57cfa
Summary:
Buck TARGETS files are sometimes parsed with Python, and sometimes with Starlark - this TARGETS file was not Starlark compliant. In Starlark you can't have a top-level if in a TARGETS file, but you can have a ternary `a if b else c`. Therefore I converted TARGETS, and updated the generator for it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7743
Reviewed By: pdillinger
Differential Revision: D25342587
Pulled By: ndmitchell
fbshipit-source-id: 88cbe8632071a45a3ea8675812967614c62c78d1
Summary:
Added a fix for the failure of
DBTest2.PartitionedIndexUserToInternalKey on ppc64le in travis
Closes https://github.com/facebook/rocksdb/issues/7746
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7752
Test Plan:
Ran travis job multiple times and it passed. Will keep
watching the travis job after this patch.
Reviewed By: pdillinger
Differential Revision: D25373130
Pulled By: akankshamahajan15
fbshipit-source-id: fa0e3f85f75b687415044a506e42cc38ead87975
Summary:
Following https://github.com/facebook/rocksdb/issues/7655 and https://github.com/facebook/rocksdb/issues/7657, this PR adds `full_history_ts_low_` to `ColumnFamilyData`.
`ColumnFamilyData::full_history_ts_low_` will be used to create `FlushJob` and `CompactionJob`.
`ColumnFamilyData::full_history_ts_low` is persisted to the MANIFEST file. An application can only
increase its value. Consider the following case:
>
> The database has a key at ts=950. `full_history_ts_low` is first set to 1000, and then a GC is triggered
> and cleans up all data older than 1000. If the application sets `full_history_ts_low` to 900 afterwards,
> and tries to read at ts=960, the key at 950 is not seen. From the perspective of the read, the result
> is hard to reason. For simplicity, we just do now allow decreasing full_history_ts_low for now.
>
During recovery, the value of `full_history_ts_low` is restored for each column family if applicable. Note that
version edits in the MANIFEST file for the same column family may have `full_history_ts_low` unsorted due
to the potential interleaving of `LogAndApply` calls. Only the max will be used to restore the state of the
column family.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7740
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D25296217
Pulled By: riversand963
fbshipit-source-id: 24acda1df8262cd7cfdc6ce7b0ec56438abe242a
Summary:
The patch adds iterator support to the integrated BlobDB implementation.
Whenever a blob reference is encountered during iteration, the corresponding
blob is retrieved by calling `Version::GetBlob`, assuming the `expose_blob_index`
(formerly `allow_blob`) flag is *not* set. (Note: the flag is set by the old stacked
BlobDB implementation, which has its own blob file handling/blob retrieval logic.)
In addition, `DBIter` now uniformly returns `Status::NotSupported` with the error
message `"BlobDB does not support merge operator."` when encountering a
blob reference while performing a merge (instead of potentially returning a
message that implies the database should be opened using the stacked BlobDB's
`Open`.)
TODO: We can implement support for lazily retrieving the blob value (or in other
words, bypassing the retrieval of blob values based on key) by extending the `Iterator`
API with a new `PrepareValue` method (similarly to `InternalIterator`, which already
supports lazy values).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7731
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D25256293
Pulled By: ltamasi
fbshipit-source-id: c39cd782011495a526cdff99c16f5fca400c4811
Summary:
In current code base, in FlushMemtable, when `(Flush_reason == FlushReason::kErrorRecoveryRetryFlush && (!cfd->mem()->IsEmpty() || !cached_recoverable_state_empty_.load()))`, we assert that cfd->imm()->NumNotFlushed() > 0. However, there are some corner cases that can fail this assert: 1) if there are multiple CFs, some CF has immutable memtable, some CFs don't. In ResumeImpl, all CFs will call FlushMemtable, which will hit the assert. 2) Regular flush is scheduled and running, the resume thread is waiting. New KVs are inserted and SchedulePendingFlush is called. Regular flush will continue call MaybeScheduleFlushAndCompaction until all the immutable memtables are flushed. When regular flush ends and auto resume thread starts to schedule new flushes, cfd->imm()->NumNotFlushed() can be 0.
Remove the assert and added the comments.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7744
Test Plan: make check and pass the stress test
Reviewed By: riversand963
Differential Revision: D25340573
Pulled By: zhichao-cao
fbshipit-source-id: eac357bdace660247c197f01a9ff6857e3c97672
Summary:
Closes - https://github.com/facebook/rocksdb/issues/7710
I tested this on an Apple DTK (Developer Transition Kit) with an Apple A12Z Bionic CPU and macOS Big Sur (11.0.1).
Previously the arm64 specific CRC optimisations were limited to Linux only OS... Well now Apple Silicon is also arm64 but runs macOS ;-)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7714
Reviewed By: ltamasi
Differential Revision: D25287349
Pulled By: pdillinger
fbshipit-source-id: 639b168bf0ac2652907531e9604936ac4974b577
Summary:
In error_handler auto recovery case, if recovery_in_prog_ is false, the recover is finished or failed. In this case, the auto recovery thread should finish its execution so recovery_thread_ should be null. However, in some cases, it is not null, the caller should not directly returned. Instead, it should wait for a while and create a new thread to execute the new recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7700
Test Plan: make check, error_handler_fs_test
Reviewed By: anand1976
Differential Revision: D25098233
Pulled By: zhichao-cao
fbshipit-source-id: 5a1cba234ca18f6dd5d1be88e02d66e1d5ce931b
Summary:
When 2 phase commit is enabled, if there are prepared data in a WAL, the WAL should be kept, the minimum log number for such a WAL is written to MANIFEST during flush. In atomic flush, such information is not written to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7570
Test Plan: Added a new unit test `DBAtomicFlushTest.ManualFlushUnder2PC`, this test fails in atomic flush without this PR, after this PR, it succeeds.
Reviewed By: riversand963
Differential Revision: D24394222
Pulled By: cheng-chang
fbshipit-source-id: 60ce74b21b704804943be40c8de01b41269cf116
Summary:
In the current code base, all the manifest writes with IO error will be set with reason: BackgroundErrorReason::kManifestWrite, which will be mapped to the kHardError if the IO Error is retryable. However, if the system does not use the WAL, all the retryable IO error should be mapped to kSoftError. Create this PR to handle is special case by adding kManifestWriteNoWAL to BackgroundErrorReason.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7693
Test Plan: make check, add new testing cases to error_handler_fs_test
Reviewed By: anand1976
Differential Revision: D25066204
Pulled By: zhichao-cao
fbshipit-source-id: d59553896c2eac3fb37c05238544d2b265379462
Summary:
The minimum rate check in RateLimiterTest.Rate can fail in
Facebook's CI system Sandcastle, presumably due to heavily loaded
machines. This change disables the minimum rate check for Sandcastle
runs, and cleans up the code disabling it on other CI environments. (The
amount of conditionally compiled code shall be minimized.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7728
Test Plan: try new test with and without setting envvar SANDCASTLE=1
Reviewed By: ltamasi
Differential Revision: D25247642
Pulled By: pdillinger
fbshipit-source-id: d786233af37af9a874adbb3a9e2707ec52c27a5a
Summary:
Add timestamp to the `CompactRange()` and `GetApproximateSizes` range keys if needed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7684
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D25015421
Pulled By: jay-zhuang
fbshipit-source-id: 51ca0756087eb053a3b11801e5c7ce1c6e2d38a9
Summary:
https://github.com/facebook/rocksdb/issues/7340 reports and reproduces an assertion failure caused by a combination of the following:
- atomic flush is disabled.
- a column family can appear multiple times in the flush queue at the same time. This behavior was introduced in release 5.17.
Consequently, it is possible that two flushes race with each other. One bg flush thread flushes all memtables. The other thread calls `FlushMemTableToOutputFile()` afterwards, and hits the assertion error below.
```
assert(cfd->imm()->NumNotFlushed() != 0);
assert(cfd->imm()->IsFlushPending());
```
Fix this by reverting the behavior. In non-atomic-flush case, a column family can appear in the flush queue at most once at the same time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7362
Test Plan:
make check
Also run stress test successfully for 10 times.
```
make crash_test
```
Reviewed By: ajkr
Differential Revision: D25172996
Pulled By: riversand963
fbshipit-source-id: f1559b6366cc609e961e3fc83fae548f1fad08ce
Summary:
Closes https://github.com/facebook/rocksdb/issues/7691
The optimised CRC code for PPC64le which was originally imported in https://github.com/facebook/rocksdb/pull/2353 is not compatible with Clang 11. It looks like the code most likely originated from https://github.com/antonblanchard/crc32-vpmsum.
The code relied on a GCC header file `ppc-asm.h` which is not available in Clang.
To solve this, I have taken the same approach as the the upstream project from which the CRC code came ffc8018efc (diff-ec3e62c56fbcddeb07230f2a4673c1abd7f0f1cc8e48a2aa560056cfc1b25d60) and simply imported a copy of the GCC header file into our code-base which will be used when Clang is the compiler on pcc64le.
**NOTE**: The new file `util/ppc-asm.h` may have licensing implications which I guess need to be approved by RocksDB/Facebook before this is merged
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7713
Reviewed By: jay-zhuang
Differential Revision: D25222645
Pulled By: pdillinger
fbshipit-source-id: e3fec9136f26ce1eb7a027048bcf77a6cb3c769c
Summary:
TSAN reports that our stack trace handler makes unsafe calls
during a signal handler. I just tried fixing some of them and I don't
think it's fixable unless we can get away from using FILE stdio. Even if
we can use lower level functions only, I'm not sure it's fixed.
I also tried suppressing the reports with function and file level TSAN
suppression, but that doesn't seem to work, perhaps because the
violation is reported on the callee, not the caller.
So I added a warning to be printed whenever these violations would be
reported that they are practically ignorable.
Internal ref: T77844138
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7723
Test Plan:
run external_sst_file_test with seeded abort(), with TSAN
(TSAN warnings + new warning) and without TSAN (no warning, just stack
trace).
Reviewed By: akankshamahajan15
Differential Revision: D25228011
Pulled By: pdillinger
fbshipit-source-id: 3eda1d6e7ca3cdc64076cf99ae954168837d2818
Summary:
WAL may be truncated to an incomplete record due to crash while writing
the last record or corruption. In the former case, no hole will be
produced since no ACK'd data was lost. In the latter case, a hole could
be produced without this PR since we proceeded to recover the next WAL
as if nothing happened. This PR changes the record reading code to
always report a corruption for incomplete records in
`kPointInTimeRecovery` mode, and the upper layer will only ignore them
if the next WAL has consecutive seqnum (i.e., we are guaranteed no
hole).
While this solves the hole problem for the case of incomplete
records, the possibility is still there if the WAL is corrupted by
truncation to an exact record boundary. This PR also regresses how much data
can be recovered when writes are mixed with/without
`WriteOptions::disableWAL`, as then we can not distinguish between a
seqnum gap caused by corruption and a seqnum gap caused by a `disableWAL` write.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7701
Test Plan:
Interestingly there already was a test for this case
(`DBWALTestWithParams.kPointInTimeRecovery`); it just had a typo bug in
the verification that prevented it from noticing holes in recovery.
Reviewed By: anand1976
Differential Revision: D25111765
Pulled By: ajkr
fbshipit-source-id: 5e330b13b1ee2b5be096cea9d0ff6075843e57b6
Summary:
The patch adds basic garbage collection support to the integrated BlobDB
implementation. Valid blobs residing in the oldest blob files are relocated
as they are encountered during compaction. The threshold that determines
which blob files qualify is computed based on the configuration option
`blob_garbage_collection_age_cutoff`, which was introduced in https://github.com/facebook/rocksdb/issues/7661 .
Once a blob is retrieved for the purposes of relocation, it passes through the
same logic that extracts large values to blob files in general. This means that
if, for instance, the size threshold for key-value separation (`min_blob_size`)
got changed or writing blob files got disabled altogether, it is possible for the
value to be moved back into the LSM tree. In particular, one way to re-inline
all blob values if needed would be to perform a full manual compaction with
`enable_blob_files` set to `false`, `enable_blob_garbage_collection` set to
`true`, and `blob_file_garbage_collection_age_cutoff` set to `1.0`.
Some TODOs that I plan to address in separate PRs:
1) We'll have to measure the amount of new garbage in each blob file and log
`BlobFileGarbage` entries as part of the compaction job's `VersionEdit`.
(For the time being, blob files are cleaned up solely based on the
`oldest_blob_file_number` relationships.)
2) When compression is used for blobs, the compression type hasn't changed,
and the blob still qualifies for being written to a blob file, we can simply copy
the compressed blob to the new file instead of going through decompression
and compression.
3) We need to update the formula for computing write amplification to account
for the amount of data read from blob files as part of GC.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7694
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D25069663
Pulled By: ltamasi
fbshipit-source-id: bdfa8feb09afcf5bca3b4eba2ba72ce2f15cd06a
Summary:
This PR updates `MemTable::Add()`, `MemTable::Update()`, and
`MemTable::UpdateCallback()` to return `Status` objects, and adapts the
client code in `MemTableInserter`. The goal is to prepare these
functions for key-value checksum, where we want to verify key-value
integrity while adding to memtable. After this PR, the memtable mutation
functions can report a failed integrity check by returning `Status::Corruption`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7656
Reviewed By: riversand963
Differential Revision: D24900497
Pulled By: ajkr
fbshipit-source-id: 1a7e80581e3774676f2bbba2f0a0b04890f40009
Summary:
These new unit tests should ensure that we don't accidentally
change the interpretation of bits for what I call Standard128Ribbon
filter internally, available publicly as NewExperimentalRibbonFilterPolicy.
There is very little intuitive reason for the values we check against in
these tests; I just plug in the right expected values upon watching the
test fail initially.
Most (but not all) of the tests are essentially "whitebox" "round-trip." We
create a filter from fixed keys, and first compare the checksum of those
filter bytes against a saved value. We also run queries against other fixed
keys, comparing which return false positives against a saved set.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7696
Test Plan: test addition and refactoring only
Reviewed By: jay-zhuang
Differential Revision: D25082289
Pulled By: pdillinger
fbshipit-source-id: b5ca646fdcb5a1c2ad2085eda4a1fd44c4287f67
