Summary:
This condition is now a normal occurrence during write burst so there is
no need to warn the user about it. Here is a scenario where it happens
under completely normal conditions.
* Initially we have a DB of three levels (L0, L1, and L2) that is stable, i.e., compaction scores are all less than one.
* Now a write burst comes along. At first L0 blows up a bit in size as compaction hasn't had a chance to catch up.
* As a result of the above, `base_bytes_min` also increases since it is based on L0 size as of https://github.com/facebook/rocksdb/issues/4338
* If `base_bytes_min` increased enough (i.e., to be larger than L1), then we are shown the warning that the DB has more levels than necessary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5742
Differential Revision: D17059221
fbshipit-source-id: e4a31d6eea42089a8d273095f19653991bd91bea
Summary:
in order to avoid reallocations for a scratch std::string on every call to Next().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5702
Differential Revision: D16867803
fbshipit-source-id: 1391220a1b172b23336bbc71dc0c79ccf3b1c701
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
Crc32c Parallel computation coding optimization:
Macro unfolding removes the "for" loop and is good to decrease branch-miss in arm64 micro architecture
1024 Bytes is divided into 8(head) + 1008( 6 * 7 * 3 * 8 ) + 8(tail) three parts
Macro unfolding 42 loops to 6 CRC32C7X24BYTESs
1 CRC32C7X24BYTES containing 7 CRC32C24BYTESs
1, crc32c_test
[==========] Running 4 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 4 tests from CRC
[ RUN ] CRC.StandardResults
[ OK ] CRC.StandardResults (1 ms)
[ RUN ] CRC.Values
[ OK ] CRC.Values (0 ms)
[ RUN ] CRC.Extend
[ OK ] CRC.Extend (0 ms)
[ RUN ] CRC.Mask
[ OK ] CRC.Mask (0 ms)
[----------] 4 tests from CRC (1 ms total)
[----------] Global test environment tear-down
[==========] 4 tests from 1 test case ran. (1 ms total)
[ PASSED ] 4 tests.
2, db_bench --benchmarks="crc32c"
crc32c : 0.218 micros/op 4595390 ops/sec; 17950.7 MB/s (4096 per op)
3, repeated crc32c_test case 60000 times
perf stat -e branch-miss -- ./crc32c_test
before optimization:
739,426,504 branch-miss
after optimization:
1,128,572 branch-miss
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5675
Differential Revision: D16989210
fbshipit-source-id: 7204e6069bb6ed066d49c2d1b3ac385065a98557
Summary:
PR https://github.com/facebook/rocksdb/issues/5584 decoupled the uncompression dictionary object from the underlying block data; however, this defeats the purpose of the digested ZSTD dictionary, since the whole point
of the digest is to create it once and reuse it over and over again. This patch goes back to
storing the uncompression dictionary itself in the cache (which should be now safe to do,
since it no longer includes a Statistics pointer), while preserving the rest of the refactoring.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5645
Test Plan: make asan_check
Differential Revision: D16551864
Pulled By: ltamasi
fbshipit-source-id: 2a7e2d34bb16e70e3c816506d5afe1d842057800
Summary:
AtomicFlushStressTest is a powerful test, but right now we only run it for atomic_flush=true + disable_wal=true. We further extend it to the case where atomic_flush=false + disable_wal = false. All the workload generation and validation can stay the same.
Atomic flush crash test is also changed to switch between the two test scenarios. It makes the name "atomic flush crash test" out of sync from what it really does. We leave it as it is to avoid troubles with continous test set-up.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5729
Test Plan: Run "CRASH_TEST_KILL_ODD=188 TEST_TMPDIR=/dev/shm/ USE_CLANG=1 make whitebox_crash_test_with_atomic_flush", observe the settings used and see it passed.
Differential Revision: D16969791
fbshipit-source-id: 56e37487000ae631e31b0100acd7bdc441c04163
Summary:
To improve code readability, since RetrieveBlock already calls MaybeReadBlockAndLoadToCache, we avoid name similarity of the functions that call RetrieveBlock with MaybeReadBlockAndLoadToCache. The patch thus renames MaybeLoadBlocksToCache to RetrieveMultipleBlock and deletes GetDataBlockFromCache, which contains only two lines.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5726
Differential Revision: D16962535
Pulled By: maysamyabandeh
fbshipit-source-id: 99e8946808ce4eb7857592b9003812e3004f92d6
Summary:
The batched MultiGet() implementation was not correctly handling bloom filter lookups when whole_key_filtering is disabled. It was incorrectly skipping keys not in the prefix_extractor domain, and not calling transform for keys in domain. This PR fixes both problems by moving the domain check and transformation to the FilterBlockReader.
Tests:
Unit test (confirmed failed before the fix)
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5665
Differential Revision: D16902380
Pulled By: anand1976
fbshipit-source-id: a6be81ad68a6e37134a65246aec7a2c590eccf00
Summary:
The comments of snap_refresh_nanos advertise that the snapshot refresh feature will be disabled when the option is set to 0. This contract is however not honored in the code: https://github.com/facebook/rocksdb/pull/5278
The patch fixes that and also adds an assert to ensure that the feature is not used when the option is zero.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5724
Differential Revision: D16918185
Pulled By: maysamyabandeh
fbshipit-source-id: fec167287df7d85093e087fc39c0eb243e3bbd7e
Summary:
Recently readahead is introduced for checksum verifying. However, users cannot override the setting for the checksum verifying before external SST file ingestion. Introduce a new option for the purpose.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5721
Test Plan: Add a new unit test for it.
Differential Revision: D16906896
fbshipit-source-id: 218ec37001ddcc05411cefddbe233d15ab308476
Summary:
We see this TSAN warning:
WARNING: ThreadSanitizer: data race (pid=282806)
Write of size 8 at 0x7b6c00000e38 by thread T16 (mutexes: write M1023578822185846136):
#0 operator delete(void*) <null> (libtsan.so.0+0x0000000795f8)
https://github.com/facebook/rocksdb/issues/1 rocksdb::DBImpl::BackgroundFlush(bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::FlushReason*, rocksdb::Env::Priority) db/db_impl/db_impl_compaction_flush.cc:2202 (db_flush_test+0x00000060b462)
https://github.com/facebook/rocksdb/issues/2 rocksdb::DBImpl::BackgroundCallFlush(rocksdb::Env::Priority) db/db_impl/db_impl_compaction_flush.cc:2226 (db_flush_test+0x00000060cbd8)
https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::BGWorkFlush(void*) db/db_impl/db_impl_compaction_flush.cc:2073 (db_flush_test+0x00000060d5ac)
......
Previous atomic write of size 4 at 0x7b6c00000e38 by main thread:
#0 __tsan_atomic32_fetch_sub <null> (libtsan.so.0+0x00000006d721)
https://github.com/facebook/rocksdb/issues/1 std::__atomic_base<int>::fetch_sub(int, std::memory_order) /mnt/gvfs/third-party2/libgcc/c67031f0f739ac61575a061518d6ef5038f99f90/7.x/platform007/5620abc/include/c++/7.3.0/bits/atomic_base.h:524 (db_flush_test+0x0000005f9e38)
https://github.com/facebook/rocksdb/issues/2 rocksdb::ColumnFamilyData::Unref() db/column_family.h:286 (db_flush_test+0x0000005f9e38)
https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::FlushMemTable(rocksdb::ColumnFamilyData*, rocksdb::FlushOptions const&, rocksdb::FlushReason, bool) db/db_impl/db_impl_compaction_flush.cc:1624 (db_flush_test+0x0000005f9e38)
https://github.com/facebook/rocksdb/issues/4 rocksdb::DBImpl::TEST_FlushMemTable(rocksdb::ColumnFamilyData*, rocksdb::FlushOptions const&) db/db_impl/db_impl_debug.cc:127 (db_flush_test+0x00000061ace9)
https://github.com/facebook/rocksdb/issues/5 rocksdb::DBFlushTest_CFDropRaceWithWaitForFlushMemTables_Test::TestBody() db/db_flush_test.cc:320 (db_flush_test+0x0000004b44e5)
https://github.com/facebook/rocksdb/issues/6 void testing::internal::HandleSehExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) third-party/gtest-1.7.0/fused-src/gtest/gtest-all.cc:3824 (db_flush_test+0x000000be2988)
......
It's still very clear the cause of the warning is because that TSAN treats results from relaxed atomic::fetch_sub() as non-atomic with the operation itself. We can make it more explicit by bumping up the order to CS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5723
Test Plan: Run all existing test.
Differential Revision: D16908250
fbshipit-source-id: bf17d39ed19058372bdf97f6440a743f88153021
Summary:
Atomic white box test's kill odd is the same as normal test. However, in the scenario that only WritableFileWriter::Append() is blacklisted, WritableFileWriter::Flush() dominates the killing odds. Normally, most of WritableFileWriter::Flush() are called in WAL writes, where every write triggers a WAL flush. In atomic test, WAL is disabled, so the kill happens less frequently than we antipated. In some rare cases, the kill didn't end up with happening (for reasons I still don't fully understand) and cause the stress test timeout.
If WAL is disabled, make the odds 5x likely to trigger.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5717
Test Plan: Run whitebox_crash_test_with_atomic_flush and whitebox_crash_test and observe the kill odds printed out.
Differential Revision: D16897237
fbshipit-source-id: cbf5d96f6fc0e980523d0f1f94bf4e72cdb82d1c
Summary:
Right now VerifyChecksum() doesn't do read-ahead. In some use cases, users won't be able to achieve good performance. With this change, by default, RocksDB will do a default readahead, and users will be able to overwrite the readahead size by passing in a ReadOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5713
Test Plan: Add a new unit test.
Differential Revision: D16860874
fbshipit-source-id: 0cff0fe79ac855d3d068e6ccd770770854a68413
Summary:
Previous PR https://github.com/facebook/rocksdb/pull/3601 added support for making prefix_extractor dynamically mutable. However, there was a missing check for hash index when creating new BlockBasedTableIterator. While the check may be redundant because no other types of IndexReader makes uses of the flag, it is less error-prone to add the missing check so that future index reader implementation will not worry about violating the contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5712
Differential Revision: D16842052
Pulled By: miasantreble
fbshipit-source-id: aef11c0ff7a690ed248f5b8fe23481cac486b381
Summary:
In valgrind_test, TransactionTest.GetWithoutSnapshot ran 2 hours and still didn't finish. Black list from valgrind_test to prevent timeout.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5715
Test Plan: run "make valgrind_test" and see whether the test is still generated.
Differential Revision: D16866009
fbshipit-source-id: 92c78049b0bc1c2b9a0dfc1b7c8a9206b36f02f0
Summary:
Update HISTORY.md by removing a feature from "Unreleased" to 6.4.0 after cherry-picking related commits to 6.4.fb branch.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5714
Differential Revision: D16865334
Pulled By: riversand963
fbshipit-source-id: f17ede905a1dfbbcdf98806ca398c618cf54748a
Summary:
This was previously broken, as the performance context-related
macro signatures in file monitoring/perf_context_imp.h
deviated for the case when NPERF_CONTEXT was defined and when it
was not.
Update the macros for the `-DNPERF_CONTEXT` case, so it compiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5704
Differential Revision: D16867746
fbshipit-source-id: 05539724cb1f7955ecc42828365836a677759ad9
Summary:
VersionSet::ApproximateSize doesn't need to create two separate index iterators and do binary search for each in BlockBasedTable. So BlockBasedTable::ApproximateSize was added that creates the iterator once and uses it to calculate the data size between start and end keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5693
Differential Revision: D16774056
Pulled By: elipoz
fbshipit-source-id: 53ce262e1a057788243bf30cd9b8aa6581df1a18
Summary:
there is no need to return void*, as
std:🧵:thread(Func&& f, Args&&... args ) only requires `Func` to
be callable.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5709
Differential Revision: D16832894
fbshipit-source-id: a1e1b876fa8d55589ef5feb5b27f3a435068b747
Summary:
Add a command in ldb so that users can print out tombstones in SST files.
In order to test the code, change the interface of LDBCommandRunner::RunCommand() so that it doesn't return from the program, but return the status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5615
Test Plan: Add a new unit test
Differential Revision: D16550326
fbshipit-source-id: 88ddfe6984bdcbb3a528abdd115089df09eba52e
Summary:
Previously, the end key of a range deletion tombstone was considered exclusive for the purposes of deletion, but considered inclusive when checking if two SSTables overlap. For example, an SSTable with a range deletion tombstone [a, b) would be considered overlapping with an SSTable with a range deletion tombstone [b, c). This commit fixes this check.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5649
Differential Revision: D16808765
Pulled By: anand1976
fbshipit-source-id: 5c7ad1c027e4f778d35070e5dae1b8e6037e0d68
Summary:
PR https://github.com/facebook/rocksdb/issues/5298 (and subsequent related patches) unintentionally changed the
semantics of cache_index_and_filter_blocks: historically, this option
only affected the main index/filter block; with the changes, it affects
index/filter partitions as well. This can cause performance issues when
cache_index_and_filter_blocks is false since in this case, partitions are
neither cached nor preloaded (i.e. they are loaded on demand upon each
access). The patch reverts to the earlier behavior, that is, partitions
are cached similarly to data blocks regardless of the value of the above
option.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5705
Test Plan:
make check
./db_bench -benchmarks=fillrandom --statistics --stats_interval_seconds=1 --duration=30 --num=500000000 --bloom_bits=20 --partition_index_and_filters=true --cache_index_and_filter_blocks=false
./db_bench -benchmarks=readrandom --use_existing_db --statistics --stats_interval_seconds=1 --duration=10 --num=500000000 --bloom_bits=20 --partition_index_and_filters=true --cache_index_and_filter_blocks=false --cache_size=8000000000
Relevant statistics from the readrandom benchmark with the old code:
rocksdb.block.cache.index.miss COUNT : 0
rocksdb.block.cache.index.hit COUNT : 0
rocksdb.block.cache.index.add COUNT : 0
rocksdb.block.cache.index.bytes.insert COUNT : 0
rocksdb.block.cache.index.bytes.evict COUNT : 0
rocksdb.block.cache.filter.miss COUNT : 0
rocksdb.block.cache.filter.hit COUNT : 0
rocksdb.block.cache.filter.add COUNT : 0
rocksdb.block.cache.filter.bytes.insert COUNT : 0
rocksdb.block.cache.filter.bytes.evict COUNT : 0
With the new code:
rocksdb.block.cache.index.miss COUNT : 2500
rocksdb.block.cache.index.hit COUNT : 42696
rocksdb.block.cache.index.add COUNT : 2500
rocksdb.block.cache.index.bytes.insert COUNT : 4050048
rocksdb.block.cache.index.bytes.evict COUNT : 0
rocksdb.block.cache.filter.miss COUNT : 2500
rocksdb.block.cache.filter.hit COUNT : 4550493
rocksdb.block.cache.filter.add COUNT : 2500
rocksdb.block.cache.filter.bytes.insert COUNT : 10331040
rocksdb.block.cache.filter.bytes.evict COUNT : 0
Differential Revision: D16817382
Pulled By: ltamasi
fbshipit-source-id: 28a516b0da1f041a03313e0b70b28cf5cf205d00
Summary:
Fix a bug in write unprepared savepoints. When flushing the write batch according to savepoint boundaries, we were forgetting to flush the last write batch after the last savepoint, meaning that some data was not written to DB.
Also, add a small optimization where we avoid flushing empty batches.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5703
Differential Revision: D16811996
Pulled By: lth
fbshipit-source-id: 600c7e0e520ad7a8fad32d77e11d932453e68e3f
Summary:
Some accesses to blob_files_ and open_ttl_files_ in BlobDBImpl, as well
as to expiration_range_ in BlobFile were not properly synchronized.
The patch fixes this and also makes sure the invariant that obsolete_files_
is a subset of blob_files_ holds even when an attempt to delete an obsolete
blob file fails.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5698
Test Plan:
COMPILE_WITH_TSAN=1 make blob_db_test
gtest-parallel --repeat=1000 ./blob_db_test --gtest_filter="*ShutdownWait*"
The test fails with TSAN errors ~20 times out of 1000 without the patch but
completes successfully 1000 out of 1000 times with the fix.
Differential Revision: D16793235
Pulled By: ltamasi
fbshipit-source-id: 8034b987598d4fdc9f15098d4589cc49cde484e9
Summary:
In MyRocks, there are cases where we write while iterating through keys. This currently breaks WBWIIterator, because if a write batch flushes during iteration, the delta iterator would point to invalid memory.
For now, fix by disallowing flush if there are active iterators. In the future, we will loop through all the iterators on a transaction, and refresh the iterators when a write batch is flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5699
Differential Revision: D16794157
Pulled By: lth
fbshipit-source-id: 5d5bf70688bd68fe58e8a766475ae88fd1be3190
Summary:
Fix the following clang analyze failures:
```
In file included from utilities/transactions/transaction_test.cc:8:
./utilities/transactions/transaction_test.h:174:14: warning: Attempt to delete released memory
delete root_db;
^
```
The destructor of StackableDB already deletes the root db and there is no need to delete the db separately.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5700
Test Plan: USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j24 analyze
Differential Revision: D16800579
Pulled By: maysamyabandeh
fbshipit-source-id: 64c2d70f23e07e6a15242add97c744902ea33be5
Summary:
Currently, if a write is done without a snapshot, then `largest_validated_seq_` is set to `kMaxSequenceNumber`. This is too aggressive, because an iterator with a snapshot created after this write should be valid.
Set `largest_validated_seq_` to `GetLastPublishedSequence` instead. The variable means that no keys in the current tracked key set has changed by other transactions since `largest_validated_seq_`.
Also, do some extra cleanup in Clear() for safety.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5697
Differential Revision: D16788613
Pulled By: lth
fbshipit-source-id: f2aa40b8b12e0c0cf9e38c940fecc8f1cc0d2385
Summary:
When updating compiler version for MyRocks I'm seeing this error with rocksdb:
```
ome/yzha/mysql/mysql-fork2/rocksdb/table/get_context.h:91:3: error: explicitly defaulted default constructor is implicitly deleted
[-Werror,-Wdefaulted-function-deleted]
GetContext() = default;
^
/home/yzha/mysql/mysql-fork2/rocksdb/table/get_context.h:166:18: note: default constructor of 'GetContext' is implicitly deleted because field
'tracing_get_id_' of const-qualified type 'const uint64_t' (aka 'const unsigned long') would not be initialized
const uint64_t tracing_get_id_;
^
```
The error itself is rather self explanatory and makes sense.
Given that no one seems to be using the default ctor (they shouldn't, anyway), I'm deleting it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5685
Differential Revision: D16747712
Pulled By: yizhang82
fbshipit-source-id: 95c0acb958a1ed41154c0047d2e6fce7644de53f
Summary:
With changes made in https://github.com/facebook/rocksdb/pull/5664 we meant to pass snap_released parameter of ::IsInSnapshot from the read callbacks. Although the variable was defined, passing it to the callback in WritePreparedTxnReadCallback was missing, which is fixed in this PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5691
Differential Revision: D16767310
Pulled By: maysamyabandeh
fbshipit-source-id: 3bf53f5964a2756a66ceef7c8f6b3ac75f102f48
Summary:
The changes transaction_test to set `txn_db_options.default_write_batch_flush_threshold = 1` in order to give better test coverage for WriteUnprepared.
As part of the change, some tests had to be updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5658
Differential Revision: D16740468
Pulled By: lth
fbshipit-source-id: 3821eec20baf13917c8c1fab444332f75a509de9
Summary:
PR https://github.com/facebook/rocksdb/pull/5676 added some test coverage for `TEST_ENV_URI`, which unfortunately isn't supported in lite mode, causing some test failures for rocksdb lite. For example,
```
db/db_test_util.cc: In constructor ‘rocksdb::DBTestBase::DBTestBase(std::__cxx11::string)’:
db/db_test_util.cc:57:16: error: ‘ObjectRegistry’ has not been declared
Status s = ObjectRegistry::NewInstance()->NewSharedObject(test_env_uri,
^
```
This PR fixes these errors by excluding the new code from test functions for lite mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5686
Differential Revision: D16749000
Pulled By: miasantreble
fbshipit-source-id: e8b3088c31a78b3dffc5fe7814261909d2c3e369
Summary:
SmallestUnCommittedSeq reads two data structures, prepared_txns_ and delayed_prepared_. These two are updated in CheckPreparedAgainstMax when max_evicted_seq_ advances some prepared entires. To avoid the cost of acquiring a mutex, the read from them in SmallestUnCommittedSeq is not atomic. This creates a potential race condition.
The fix is to read the two data structures in the reverse order of their update. CheckPreparedAgainstMax copies the prepared entry to delayed_prepared_ before removing it from prepared_txns_ and SmallestUnCommittedSeq looks into prepared_txns_ before reading delayed_prepared_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5683
Differential Revision: D16744699
Pulled By: maysamyabandeh
fbshipit-source-id: b1bdb134018beb0b9de58827f512662bea35cad0
Summary:
Most existing RocksDB unit tests run on `Env::Default()`. It will be useful to port the unit tests to non-default environments, e.g. `HdfsEnv`, etc.
This pull request is one step towards this goal. If RocksDB unit tests are built with a static library exposing a function `RegisterCustomObjects()`, then it is possible to implement custom object registrar logic in the library. RocksDB unit test can call `RegisterCustomObjects()` at the beginning.
By default, `ROCKSDB_UNITTESTS_WITH_CUSTOM_OBJECTS_FROM_STATIC_LIBS` is not defined, thus this PR has no impact on existing RocksDB because `RegisterCustomObjects()` is a noop.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$make check
```
All unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5676
Differential Revision: D16679157
Pulled By: riversand963
fbshipit-source-id: aca571af3fd0525277cdc674248d0fe06e060f9d
Summary:
This PR adds support in block cache trace analyzer to read from human readable trace file. This is needed when a user does not have access to the binary trace file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5679
Test Plan: USE_CLANG=1 make check -j32
Differential Revision: D16697239
Pulled By: HaoyuHuang
fbshipit-source-id: f2e29d7995816c389b41458f234ec8e184a924db
Summary:
This ports `folly::DistributedMutex` into RocksDB. The PR includes everything else needed to compile and use DistributedMutex as a component within folly. Most files are unchanged except for some portability stuff and includes.
For now, I've put this under `rocksdb/third-party`, but if there is a better folder to put this under, let me know. I also am not sure how or where to put unit tests for third-party stuff like this. It seems like gtest is included already, but I need to link with it from another third-party folder.
This also includes some other common components from folly
- folly/Optional
- folly/ScopeGuard (In particular `SCOPE_EXIT`)
- folly/synchronization/ParkingLot (A portable futex-like interface)
- folly/synchronization/AtomicNotification (The standard C++ interface for futexes)
- folly/Indestructible (For singletons that don't get destroyed without allocations)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5642
Differential Revision: D16544439
fbshipit-source-id: 179b98b5dcddc3075926d31a30f92fd064245731
Summary:
This PR adds four more eviction policies.
- OPT [1]
- Hyperbolic caching [2]
- ARC [3]
- GreedyDualSize [4]
[1] L. A. Belady. 1966. A Study of Replacement Algorithms for a Virtual-storage Computer. IBM Syst. J. 5, 2 (June 1966), 78-101. DOI=http://dx.doi.org/10.1147/sj.52.0078
[2] Aaron Blankstein, Siddhartha Sen, and Michael J. Freedman. 2017. Hyperbolic caching: flexible caching for web applications. In Proceedings of the 2017 USENIX Conference on Usenix Annual Technical Conference (USENIX ATC '17). USENIX Association, Berkeley, CA, USA, 499-511.
[3] Nimrod Megiddo and Dharmendra S. Modha. 2003. ARC: A Self-Tuning, Low Overhead Replacement Cache. In Proceedings of the 2nd USENIX Conference on File and Storage Technologies (FAST '03). USENIX Association, Berkeley, CA, USA, 115-130.
[4] N. Young. The k-server dual and loose competitiveness for paging. Algorithmica, June 1994, vol. 11,(no.6):525-41. Rewritten version of ''On-line caching as cache size varies'', in The 2nd Annual ACM-SIAM Symposium on Discrete Algorithms, 241-250, 1991.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5644
Differential Revision: D16548817
Pulled By: HaoyuHuang
fbshipit-source-id: 838f76db9179f07911abaab46c97e1c929cfcd63
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
The actual value of default write buffer size within `rocksdb/include/rocksdb/options.h` is 64 MB, we should correct this value in java doc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5670
Differential Revision: D16668815
Pulled By: maysamyabandeh
fbshipit-source-id: cc3a981c9f1c2cd4a8392b0ed5f1fd0a2d729afb
Summary:
This PR updated the python script to plot graphs for stats output from block cache analyzer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5673
Test Plan: Manually run the script to generate graphs.
Differential Revision: D16657145
Pulled By: HaoyuHuang
fbshipit-source-id: fd510b5fd4307835f9a986fac545734dbe003d28
Summary:
If a test is one of parallel tests, then it should also be one of the 'tests'.
Otherwise, `make all` won't build the binaries. For examle,
```
$COMPILE_WITH_ASAN=1 make -j32 all
```
Then if you do
```
$make check
```
The second command will invoke the compilation and building for db_bloom_test
and file_reader_writer_test **without** the `COMPILE_WITH_ASAN=1`, causing the
command to fail.
Test plan (on devserver):
```
$make -j32 all
```
Verify all binaries are built so that `make check` won't have to compile any
thing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5672
Differential Revision: D16655834
Pulled By: riversand963
fbshipit-source-id: 050131412b5313496f85ae3deeeeb8d28af75746
Summary:
if read_options.snapshot is not set, ::Get will take the last sequence number after taking a super-version and uses that as the sequence number. Theoretically max_eviceted_seq_ could advance this sequence number. This could lead ::IsInSnapshot that will be invoked by the ReadCallback to notice the absence of the snapshot. In this case, the ReadCallback should have passed a non-value to snap_released so that it could be set by the ::IsInSnapshot. The patch does that, and adds a unit test to verify it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5664
Differential Revision: D16614033
Pulled By: maysamyabandeh
fbshipit-source-id: 06fb3fd4aacd75806ed1a1acec7961f5d02486f2
