Summary: As offline discussion with Siying, revert this since it has bug with seek.
Test Plan: make check -j64
Reviewers: yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65559
Summary:
The verification condition of the test DBTest.RepeatedWritesToSameKey doesn't hold anymore after 3ce3bb3da2.
Disable the test for now before we find a way to replace it.
Test Plan: Run the test and make sure it is disabled.
Summary: Siying suggested to keep old code for normal mode prev() for safety
Test Plan: make check -j64
Reviewers: yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65439
Summary: Using real clock causes failures of DBSSTTest.RateLimitedDelete in some cases. Turn away from the real time. Use fake time instead.
Test Plan: Run the tests and all existing tests.
Reviewers: yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65145
Summary:
The previous fix of reappearing of a deleted row 0ce258f9b3 missed a corner case, which can be reproduced using test CompactionPickerTest.OverlappingUserKeys7. Consider such an example:
input level file: 1[B E] 2[F H]
output level file: 3[A C] 4[D I] 5[I K]
First file 2 is picked, which overlaps to file 4. 4 expands to 5. Now the all range is [D K] with 2 output level files. When we try to expand that, [D K] overlaps with file 1 and 2 in the input level, and 1 and 2 overlaps with 3 and 4 in the output level. So we end up with picking 3 and 4 in the output level. Without expanding, it also has 2 files, so we determine the output level doesn't change, although they are the different two files.
The fix is to expand the output level files after we picked 3 and 4. In that case, there will be three output level files so we will abort the expanding.
I also added two unit tests related to marked_for_compaction and being_compacted. They have been passing though.
Test Plan: Run the new unit test, as well as all other tests.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65373
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.
Test Plan: make all check -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65121
Summary:
Changes in the diff
API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API
Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers
Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob
Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)
Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: jkedgar, hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65061
Summary: DBTestUniversalCompaction.UniversalCompactionTrivialMoveTest2 verifies non-trivial move is not triggered if we load data in sequential order. However, if there are multiple compaction threads, this conditon may not hold. Restrict the running condition to 1 compaction thread to make the test more robust.
Test Plan: Run the test and make sure at least it doesn't regress normally.
Reviewers: yhchiang, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65277
Summary: Some tests in column_family_test depend on functions that are not available in LITE build, which sometimes cause flakiness. Disable them.
Test Plan: Run those tests in LITE build.
Reviewers: yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65271
Summary:
reland https://reviews.facebook.net/D62523
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: sdong, yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65211
Summary: we should not split file on level 0 in compaction because it will fail the following verification of seqno order on level 0
Test Plan: check with filldeterministic in db_bench
Reviewers: yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65193
Summary: in rocksdb::DBIter::FindValueForCurrentKey(), last_not_merge_type could also be SingleDelete() which is omitted
Test Plan: db_iter_test
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65187
Summary: SamePrefixTest.InDomainTest may fail if the previous run of some test cases in prefix_test fail.
Test Plan: Run the test
Reviewers: lightmark, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65163
Summary:
MyRocks hit a regression, @mung generated perf reports showing that the reason is the cost of calling `GetDBOptions()` inside `GetFromBatchAndDB()`
This diff avoid calling `GetDBOptions` and use the `ImmutableDBOptions` instead
Test Plan: make check -j64
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, mung
Differential Revision: https://reviews.facebook.net/D65151
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
Summary:
Previously the WAL files that were avoided during recovery would never
be considered for deletion. That was because alive_log_files_ was only
populated when log files are created. This diff further populates
alive_log_files_ with existing log files that aren't flushed during recovery,
such that FindObsoleteFiles() can find them later.
Depends on D64053.
Test Plan: new unit test, verifies it fails before this change and passes after
Reviewers: sdong, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64059
Summary:
Previously we have an assertion which triggers when we issue Merges
after a single delete. However, merges after a single delete are
unrelated to that single delete. Thus this behavior should be
allowed.
This will address a flakyness of db_stress.
Test Plan: db_stress
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64923
Summary:
Issue scenario:
(1) We have 3 files in L1 and we issue a compaction that will compact them into 1 file in L2
(2) While compaction (1) is running, we flush a file into L0 and trigger another compaction that decide to move this file to L1 and then move it again to L2 (this file don't overlap with any other files)
(3) compaction (1) finishes and install the file it generated in L2, but this file overlap with the file we generated in (2) so we break the LSM consistency
Looks like this issue can be triggered by using non-exclusive manual compaction or AddFile()
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: hermanlee4, jkedgar, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D64947
Summary: I accidentally left out these changes from my commit of D64053 due to
messing up the merge conflict resolution.
Test Plan: ./db_wal_test
Reviewers:
Subscribers:
Tasks:
Blame Revision: D64053
Summary:
This reverts commit 9e4aa798c3,
which doesn't handle all cases (see inline comment).
I reimplemented the logic as suggested in the initial PR: https://github.com/facebook/rocksdb/pull/1313.
This approach has two benefits:
- All the parsing/filtering of full_scan_candidate_files is kept together in PurgeObsoleteFiles.
- We only need to check whether log file is recycled in one place where we've already determined it's a log file
Test Plan:
new unit test, verified fails before the original fix, still passes
now.
Reviewers: IslamAbdelRahman, yiwu, sdong
Reviewed By: yiwu, sdong
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64053
Summary:
1) The previous solution for Prev() prefix support is not clean.
Since I add api SeekForPrev(), now the Prev() can be symmetric to Next().
and we do not need SeekToLast() to be called in Prev() any more.
Also, Next() will Seek(prefix_seek_key_) to solve the problem of possible inconsistency between db_iter and merge_iter when
there is merge_operator. And prefix_seek_key is only refreshed when change direction to forward.
2) This diff also solves the bug of Iterator::SeekToLast() with iterate_upper_bound_ with prefix extractor.
add test cases for the above two cases.
There are some tests for the SeekToLast() in Prev(), I will clean them later.
Test Plan: make all check
Reviewers: IslamAbdelRahman, andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63933
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode
Test Plan:
make check -j64
make release
Reviewers: lightmark, sdong, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64701
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
Summary:
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: andrewkr, yhchiang, yiwu, sdong
Reviewed By: sdong
Subscribers: hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62523
Summary:
- Store range tombstones in a separate MemTableRep instantiated with ColumnFamilyOptions::memtable_factory
- MemTable::NewRangeTombstoneIterator() returns a MemTableIterator over the separate MemTableRep
- Part of the read path is not implemented yet (i.e., MemTable::Get())
Test Plan: see unit tests
Reviewers: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62217
Summary:
Fix the conflict bug between AddFile() and CompactRange() by
- Make sure that no AddFile calls are running when asking CompactionPicker to pick compaction for manual compaction
- If AddFile() run after we pick the compaction for the manual compaction it will be aware of it since we will add the manual compaction to running_compactions_ after picking it
This will solve these 2 scenarios
- If AddFile() is running, we will wait for it to finish before we pick a compaction for the manual compaction
- If we already picked a manual compaction and then AddFile() started ... we ensure that it never ingest a file in a level that will overlap with the manual compaction
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64449
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary: We didn't recompute compaction score on SetOptions, and end up not having compaction if no flush happens afterward. The PR fixing it.
Test Plan: See unit test.
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64167
Summary:
Since AddFile unlock/lock the mutex inside LogAndApply() we need to ensure that during this period other compactions cannot run since such compactions are not aware of the file we are ingesting and could create a compaction that overlap wit this file
this diff add
- WaitForAddFile() call that will ensure that no AddFile() calls are being processed right now
- Call `WaitForAddFile()` in 3 locations
-- When doing manual Compaction
-- When starting automatic Compaction
-- When doing CompactFiles()
Test Plan: unit test
Reviewers: lightmark, yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64383
Summary: we should not call ShouldStopBefore() in compaction when the compaction targets level 0. Otherwise, CheckConsistency will fail the assertion of seq number check on level 0.
Test Plan:
make all check -j64
I also manully test that using db_bench to compact files to level 0. Without this line change, the assertion files and multiple files are generated on level 0 after compaction.
Reviewers: yhchiang, andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64269
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
Revert the behavior where we don't read sequence id from WAL, but increase it as we replay the log. We still keep the behave for 2PC for now but will fix later.
This change fixes github issue 1339, where some writes come with WAL disabled and we may recover records with wrong sequence id.
Test Plan: Added unit test.
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64275
Summary: add ColumnFamilyHandleDeletionStarted listener which can be called when user deletes handler.
Test Plan: ./listener_test
Reviewers: yiwu, IslamAbdelRahman, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60717
Summary:
Report more information about the ingested files in CF InternalStats
- Total files
- Total L0 files
- Total keys
There was also noticed that we were reporting files that failed to ingest, fix this bug
Test Plan: print stats in tests
Reviewers: sdong, andrewkr, lightmark
Reviewed By: lightmark
Subscribers: jkedgar, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D63039
Summary:
Mitigate regression bug of options.max_successive_merges hit during DB Recovery
For https://reviews.facebook.net/D62625
Test Plan: make all check
Reviewers: horuff, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62655
Summary: WritableFile::SetPreallocationBlockSize() requires parameter as size_t, and options used in DBImpl::GetWalPreallocateBlockSize() are all size_t. WritableFile::SetPreallocationBlockSize() should return size_t to avoid build break if size_t is not uint64_t.
Test Plan: Run existing tests.
Reviewers: andrewkr, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64137
Summary: Currently the WAL file preallocation size is 1.1 * write_buffer_size. This, however, will be over-estimated if options.db_write_buffer_size or options.max_total_wal_size is set and is much smaller.
Test Plan: Add a unit test.
Reviewers: andrewkr, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63957
Summary: One more small refactor before I split DBOptions into mutable and immutable parts.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64047
Summary: RandomInitCFOptions will allocate a new compaction filter, which we have to delete afterward.
Test Plan: valgrind against the test
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64011
Summary: Seems there's no std::array on mac+clang. Use raw array instead.
Test Plan: run ./db_wal_test on mac.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64005
Summary:
if one or more CFs had no data in the WAL, the log number that's used
by FindObsoleteFiles() wasn't updated. We need to treat this case the same as
if the data for that WAL had been flushed.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63963
Summary:
Previously the sequence number was mistakenly passed in an argument
where the log number should go. This caused the reader to assume the old WAL
format was used, which is incompatible with the WAL recycling format.
Test Plan:
new unit test, verified it fails before this change and passes
afterwards.
Reviewers: yiwu, lightmark, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63987
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63945
If log recycling is enabled with the rocksdb (recycle_log_file_num=16)
db->Writebatch is erroring out with keynotfound after ~5-6 hours of run
(1M seq but can happen to any workload I guess).See my detailed bug
report here (https://github.com/facebook/rocksdb/issues/1303).
This commit is the fix for this, a check is been added not to delete
the log file if it is already there in the recycle list.
Test Plan:
Unit tested it and ran the similar profile. Not reproducing anymore.
Summary: In ColumnFamilyTest.FlushCloseWALFiles, there is a small window in which the flush has finished but the log writer is not yet closed, causing the assert failure. Fix it by explicitly waiting the flush job to finish.
Test Plan: Run the test many times in high parallelism.
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63423
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
Summary: The new variable introduced in 2149059f910149197d1a0f79ac08cf19465ea2d may be unitialized. Valgrind is failing because of it.
Test Plan: Run valgrind tests
Reviewers: yiwu, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63201
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63177
Summary:
When ingesting multiple files
- We should use user comparator
- Should not call `cfd->current()` outside of mutex
Test Plan: unit tests
Reviewers: sdong, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63075
* Fix StatsLevel so that kExceptTimeForMutex leaves compression stats enabled and kExceptDetailedTimers disables mutex lock stats. Also change default stats level to kExceptDetailedTimers (disabling both compression and mutex timing).
* Changed order of StatsLevel enum to simplify logic for determining what stats to record.
Summary: To reduce number of options, merge source_compaction_factor, max_grandparent_overlap_bytes and expanded_compaction_factor into max_compaction_bytes.
Test Plan: Add two new unit tests. Run all existing tests, including jtest.
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59829
Summary: add prefix_seek_mode to db_iter_test to enable data race test for iterator when prefix_extractor != nullptr
Test Plan: make all check -j64
Reviewers: andrewkr, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63027
Summary: As title, make sure Prev() works as expected with Next() when the current iter->key() in the range of the same prefix in prefix seek mode
Test Plan: make all check -j64 (add prefix_test with PrefixSeekModePrev test case)
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61419
Summary:
Add ReadOptions::read_amp_bytes_per_bit option which allow us to create a bitmap for every data block we read
the bitmap will contain (block_size / read_amp_bytes_per_bit) bits.
We will use this bitmap to mark which bytes have been used of the block so we can calculate the read amplification
Test Plan: added new tests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: yiwu, leveldb, march, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58707
Summary:
After 1b8a2e8fdd, DB Pointer is passed to WriteBatchInternal::InsertInto() while DB recovery. This can cause deadlock if options.max_successive_merges hits. In that case DB::Get() will be called. Get() will try to acquire the DB mutex, which is already held by the DB::Open(), causing a deadlock condition.
This commit mitigates the problem by not passing the DB pointer unless 2PC is allowed.
Test Plan: Add a new test and run it.
Reviewers: IslamAbdelRahman, andrewkr, kradhakrishnan, horuff
Reviewed By: kradhakrishnan
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62625
Summary:
Move the manual memtable flush for databases containing data that has
bypassed the WAL from DBImpl's destructor to CancleAllBackgroundWork().
CancelAllBackgroundWork() is a publicly exposed API which allows
async operations performed by background threads to be disabled on a
database. In effect, this places the database into a "shutdown" state
in advance of calling the database object's destructor. No compactions
or flushing of SST files can occur once a call to this API completes.
When writes are issued to a database with WriteOptions::disableWAL
set to true, DBImpl::has_unpersisted_data_ is set so that
memtables can be flushed when the database object is destroyed. If
CancelAllBackgroundWork() has been called prior to DBImpl's destructor,
this flush operation is not possible and is skipped, causing unnecessary
loss of data.
Since CancelAllBackgroundWork() is already invoked by DBImpl's destructor
in order to perform the thread join portion of its cleanup processing,
moving the manual memtable flush to CancelAllBackgroundWork() ensures
data is persisted regardless of client behavior.
Test Plan:
Write an amount of data that will not cause a memtable flush to a rocksdb
database with all writes marked with WriteOptions::disableWAL. Properly
"close" the database. Reopen database and verify that the data was
persisted.
Reviewers: IslamAbdelRahman, yiwu, yoshinorim, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62277
Summary:
We've got a crash with this stack trace:
Program terminated with signal SIGTRAP, Trace/breakpoint trap.
#0 0x00007fc85f2f4009 in raise () from /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
#1 0x00000000005c8f61 in facebook::logdevice::handle_sigsegv(int) () at logdevice/server/sigsegv.cpp:159
#2 0x00007fc85f2f4150 in <signal handler called> () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
#3 0x00000000031ed80c in rocksdb::NewReadaheadRandomAccessFile() at util/file_reader_writer.cc:383
#4 0x00000000031ed80c in rocksdb::NewReadaheadRandomAccessFile() at util/file_reader_writer.cc:472
#5 0x00000000031558e7 in rocksdb::TableCache::GetTableReader() at db/table_cache.cc:99
#6 0x0000000003156329 in rocksdb::TableCache::NewIterator() at db/table_cache.cc:198
#7 0x0000000003166568 in rocksdb::VersionSet::MakeInputIterator() at db/version_set.cc:3345
#8 0x000000000324a94f in rocksdb::CompactionJob::ProcessKeyValueCompaction(rocksdb::CompactionJob::SubcompactionState*) () at db/compaction_job.cc:650
#9 0x000000000324c2f6 in rocksdb::CompactionJob::Run() () at db/compaction_job.cc:530
#10 0x00000000030f5ae5 in rocksdb::DBImpl::BackgroundCompaction() at db/db_impl.cc:3269
#11 0x0000000003108d36 in rocksdb::DBImpl::BackgroundCallCompaction(void*) () at db/db_impl.cc:2970
#12 0x00000000029a2a9a in facebook::logdevice::RocksDBEnv::callback(void*) () at logdevice/server/locallogstore/RocksDBEnv.cpp:26
#13 0x00000000029a2a9a in facebook::logdevice::RocksDBEnv::callback(void*) () at logdevice/server/locallogstore/RocksDBEnv.cpp:30
#14 0x00000000031e7521 in rocksdb::ThreadPool::BGThread() at util/threadpool.cc:230
#15 0x00000000031e7663 in rocksdb::BGThreadWrapper(void*) () at util/threadpool.cc:254
#16 0x00007fc85f2ea7f1 in start_thread () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
#17 0x00007fc85e8fb46d in clone () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libc.so.6
From looking at the code, probably what happened is this:
- `TableCache::GetTableReader()` called `Env::NewRandomAccessFile()`, which dispatched to a `PosixEnv::NewRandomAccessFile()`, where probably an `open()` call failed, so the `NewRandomAccessFile()` left a nullptr in the resulting file,
- `TableCache::GetTableReader()` called `NewReadaheadRandomAccessFile()` with that `nullptr` file,
- it tried to call file's method and crashed.
This diff is a trivial fix to this crash.
Test Plan: `make -j check`
Reviewers: sdong, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62451
Summary:
We used to allow insert into full block cache as long as `strict_capacity_limit=false`. This diff further restrict insert to full cache if caller don't intent to hold handle to the cache entry after insert.
Hope this diff fix the assertion failure with db_stress: https://our.intern.facebook.com/intern/sandcastle/log/?instance_id=211853102&step_id=2475070014
db_stress: util/lru_cache.cc:278: virtual void rocksdb::LRUCacheShard::Release(rocksdb::Cache::Handle*): Assertion `lru_.next == &lru_' failed.
The assertion at lru_cache.cc:278 can fail when an entry is inserted into full cache and stay in LRU list.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62325
Summary:
Add option to block based table to insert index/filter blocks to block cache with priority. Combined with LRUCache with high_pri_pool_ratio, we can reserved space for index/filter blocks, make them less likely to be evicted.
Depends on D61977.
Test Plan: See unit test.
Reviewers: lightmark, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, march, leveldb
Differential Revision: https://reviews.facebook.net/D62241
Summary: Update SstFileWriter to use user TablePropertiesCollectors that are passed in Options
Test Plan: unittests
Reviewers: sdong
Reviewed By: sdong
Subscribers: jkedgar, andrewkr, hermanlee4, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D62253
Summary: 1. Range Deletion Tombstone structure 2. Modify Add() in table_builder to make it usable for adding range del tombstones 3. Expose NewTombstoneIterator() API in table_reader
Test Plan: table_test.cc (now BlockBasedTableBuilder::Add() only accepts InternalKey. I make table_test only pass InternalKey to BlockBasedTableBuidler. Also test writing/reading range deletion tombstones in table_test )
Reviewers: sdong, IslamAbdelRahman, lightmark, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61473
Summary:
Added 2 statistics in compaction job statistics, to
identify if single deletes are not meeting a matching key
(fallthrough) or single deletes are meeting a merge, delete or
another single delete (i.e. not the expected case of put).
Test Plan: Tested the statistics using write_stress and compaction_job_stats_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61749
Summary:
Add API to WriteBatch to store range deletions in its buffer
which are later added to memtable. In the WriteBatch buffer, a range
deletion is encoded as "<optype><CF ID (optional)><begin key><end key>".
With this diff, the range tombstones are stored inline with the data in
the memtable. It's useful for now because the test cases rely on the
data being accessible via memtable. My next step is to store range
tombstones in a separate area in the memtable.
Test Plan: unit tests
Reviewers: IslamAbdelRahman, sdong, wanning
Reviewed By: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61401
Summary: Fix the test by releasing the last snapshot
Test Plan: run the test under valgrind
Reviewers: andrewkr, yiwu, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62091
Summary: "Batch" is ambiguous in this context. It can mean "write batch" or commit group. Change it to commit group to be clear.
Test Plan: Build
Reviewers: MarkCallaghan, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62055
Summary:
This diff update ForwardIterator to support pinning keys and values, which will allow DBIter to take advantage of that and eliminate memcpy when executing merge operators
This diff is stacked on D61305
Test Plan:
existing tests (updated them to test tailing iterator)
new test
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60009
Summary:
This diff include these simple change
- Rename ReleasePinnedIterators to ReleasePinnedData
- Rename PinIteratorIfNeeded to PinIterator
- Use std::vector directly in PinnedIteratorsManager instead of std::unique_ptr<std::vector>
- Generalize PinnedIteratorsManager by adding PinPtr which can pin any pointer
Test Plan: existing tests
Reviewers: sdong, yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61305
Summary: Background sleeping tasks may conflict with test cleaning up. Wait for the sleeping tasks to finish before ending the test.
Test Plan: Run these tests.
Reviewers: andrewkr, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61827
Summary: With read_options.background_purge_on_iterator_cleanup=true, File deletion and closing can still happen in forward iterator, or WAL file closing. Cover those cases too.
Test Plan: I am adding unit tests.
Reviewers: andrewkr, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61503
Summary:
If we have total number of sorted runs greater than level0_file_num_compaction_trigger, Universal compaction will always issue a compaction
even if the number of sorted runs that are not being compacted is less than level0_file_num_compaction_trigger.
This diff changes this behaviour to relay on the `number of sorted runs not being compacted` instead of `total number of sorted runs`
Test Plan: New unit test
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61533
* Added check_snapshot option in the DB's AddFile function
* change check_snapshot to skip_snapshot_check
* add unit test for skip_snapshot_check
* Add skip_snapshot_check comment
Summary: Explicitly flush two times to generate two sst files.
Test Plan: run the test.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61671
Summary: The test `ObsoleteFiles` failed occasionally on slow device. This problem appears on Travis CI several times. The reason is that we did not wait until compaction jobs are finished in the test, while in slower device the background jobs take longer time to finish.
Test Plan: Pass existing tests.
Reviewers: yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61479
Summary:
My understanding is that the purpose of write stall triggers are to wait for auto-compaction to catch up. Without auto-compaction, we don't need to stall writes.
Also with this diff, flush/compaction conditions are recalculated on dynamic option change. Previously the conditions are recalculate only when write stall options are changed.
Test Plan: See the new test. Removed two tests that are no longer valid.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61437
Summary:
patch for diff https://reviews.facebook.net/D58587
Also change StopWatch class to add a fifth param named overwrite which decides whether to overwrite *elapse or add on it.
Test Plan: make all check -j64
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61239
Summary: MyRocks is adding support for the user of the SstFileWriter which needs a comparator. It would be more convenient to get the comparator from the column family (which already has to have it) than to have caller keep track of it.
Test Plan: Standard tests (adding one for the new method)
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61155
Summary:
DBTest.CompressionStatsTest on non_shm test where the storage device is slow
DBTest.CompressionStatsTest assumes that a flush happens to check the number of compressed blocks.
This is not always true if the Flush is slow, make the test more deterministic by forcing a flush before doing the check
Test Plan: Run the test locally
Reviewers: andrewkr, yiwu, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61317
Summary: regression tests to make sure seek keys not in domain would not fail assertion
Test Plan:
```
[gzh@dev6163.prn2 ~/local/rocksdb] ./prefix_test --gtest_filter=SamePrefixTest.*
/tmp/rocksdbtest-112628/prefix_test
Note: Google Test filter = SamePrefixTest.*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from SamePrefixTest
[ RUN ] SamePrefixTest.InDomainTest
[ OK ] SamePrefixTest.InDomainTest (211 ms)
[----------] 1 test from SamePrefixTest (211 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (211 ms total)
```
Reviewers: andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61161
Summary: Extend the option memtable_prefix_bloom_huge_page_tlb_size from just putting memtable bloom filter to huge page to memtable itself too.
Test Plan: Run all existing tests.
Reviewers: IslamAbdelRahman, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60513
Summary: We may wrongly drop delete operation if we pick a file with the entry to be delete, the put entry of the same user key is in the next file in the level, and the next file is not picked. We expand compaction inputs for output level too.
Test Plan: Add unit tests that reproduct the bug of dropping delete entry. Change compaction_picker_test to assert the new behavior.
Reviewers: IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61173
Summary: old typos with FILTER/INDEX_CACHE
Test Plan: still pass this unit test
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61185
Summary:
MergeContext::copied_operands contain strings that MergeContext::operand_list_ Slices point to
It's possible that when MergeContext::copied_operands grow, these strings are moved and there place in memory is changed, this will cause MergeContext::operand_list_ to point to invalid memory.
fix this problem by using unique_ptr<string> instead of string
Test Plan: run tests under mac/clang
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61023
Summary: The test is flaky on Travis in osx environment. The background flush the test wanting to block can run behind the L2 manual compaction, making the test actually blocking the L2 compaction and won't able to proceed.
Test Plan: Test run on travis
Reviewers: kradhakrishnan, sdong, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61101
Summary: RocksDB lite don't support dynamic options. Disable the two test from lite build, and assert `SetOptions` should return `status::OK`.
Test Plan: Run the db_options test under lite build and normal build.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61119
Summary:
Stale log files can be deleted out of order. This can happen for various reasons. One of the reason is that no data is ever inserted to a column family and we have an optimization to update its log number, but not all the old log files are cleaned up (the case shown in the unit tests added). It can also happen when we simply delete multiple log files out of order.
This causes data corruption because we simply increase seqID after processing the next row and we may end up with writing data with smaller seqID than what is already flushed to memtables.
In DB recovery, for the oldest files we are replaying, if there it contains no data for any column family, we ignore the sequence IDs in the file.
Test Plan: Add two unit tests that fail without the fix.
Reviewers: IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60891
Summary: Multiput atomiciy is broken across multiple column families if we don't sync WAL before flushing one column family. The WAL file may contain a write batch containing writes to a key to the CF to be flushed and a key to other CF. If we don't sync WAL before flushing, if machine crashes after flushing, the write batch will only be partial recovered. Data to other CFs are lost.
Test Plan: Add a new unit test which will fail without the diff.
Reviewers: yhchiang, IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: yiwu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60915
Summary: Comment out assertion of number of table files from lite build.
Test Plan:
OPT=-DROCKSDB_LITE make check
Reviewers: lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60999
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
* Replace %zu format specifier with Windows-compatible macro 'ROCKSDB_PRIszt'
* Added "port/port.h" include to sim_cache.cc for call to snprintf().
* Applied cleaner fix to windows build, reverting part of 7bedd94
Summary: In T8216281 we decided to disable prefetching the index and filter during opening table handlers during startup (max_open_files = -1).
Test Plan: Rely on `IndexAndFilterBlocksOfNewTableAddedToCache` to guarantee L0 indexes and filters are still cached and change `PinL0IndexAndFilterBlocksTest` to make sure other levels are not cached (maybe add one more test to test we don't cache other levels?)
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59913
Summary: In many use cases there is no deletes. No need to pay the overhead of atomically updating num_deletes.
Test Plan: Run existing test.
Reviewers: ngbronson, yiwu, andrewkr, igor
Reviewed By: andrewkr
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60555
Summary:
Summary
There is a possibility that there is no L0 file after writing the data. Generate an L0 file to make it work.
Test Plan: Run the test many times.
Reviewers: andrewkr, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60825
* Added new statistics and refactored to allow ioptions to be passed around as required to access environment and statistics pointers (and, as a convenient side effect, info_log pointer).
* Prevent incrementing compression counter when compression is turned off in options.
* Prevent incrementing compression counter when compression is turned off in options.
* Added two more supported compression types to test code in db_test.cc
* Prevent incrementing compression counter when compression is turned off in options.
* Added new StatsLevel that excludes compression timing.
* Fixed casting error in coding.h
* Fixed CompressionStatsTest for new StatsLevel.
* Removed unused variable that was breaking the Linux build
Summary: Each SST's file size increases after we add more table properties. Threshold in DBTest.DynamicLevelCompressionPerLevel need to adjust accordingly to avoid occasional failures.
Test Plan: Run the test
Reviewers: andrewkr, yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60819
Summary: If options.write_buffer_size is not set, nor options.write_buffer_manager, no need to update the bytes allocated counter in MemTableAllocator, which is expensive in parallel memtable insert case. Remove it can improve parallel memtable insert throughput by 10% with write batch size 128.
Test Plan:
Run benchmarks
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -disable_auto_compactions -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -num=10000000 --writes=1000000 -max_background_flushes=16 -max_write_buffer_number=16 --threads=32 --batch_size=128 -allow_concurrent_memtable_write -enable_write_thread_adaptive_yield
The throughput grows 10% with the benchmark.
Reviewers: andrewkr, yiwu, IslamAbdelRahman, igor, ngbronson
Reviewed By: ngbronson
Subscribers: ngbronson, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60465
Summary:
add DestroyColumnFamilyHandle(ColumnFamilyHandle**) to close column family instead of deleting cfh*
User should call this to close a cf and then we can detect the deletion in this function.
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60765
Summary:
When write stalls because of auto compaction is disabled, or stop write trigger is reached,
user may change these two options to unblock writes. Unfortunately we had issue where the write
thread will block the attempt to persist the options, thus creating a deadlock. This diff
fix the issue and add two test cases to detect such deadlock.
Test Plan:
Run unit tests.
Also, revert db_impl.cc to master (but don't revert `DBImpl::BackgroundCompaction:Finish` sync point) and run db_options_test. Both tests should hit deadlock.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60627
Summary:
I was investigating performance issues in the SstFileWriter and found all of the following:
- The SstFileWriter::Add() function created a local InternalKey every time it was called generating a allocation and free each time. Changed to have an InternalKey member variable that can be reset with the new InternalKey::Set() function.
- In SstFileWriter::Add() the smallest_key and largest_key values were assigned the result of a ToString() call, but it is simpler to just assign them directly from the user's key.
- The Slice class had no move constructor so each time one was returned from a function a new one had to be allocated, the old data copied to the new, and the old one was freed. I added the move constructor which also required a copy constructor and assignment operator.
- The BlockBuilder::CurrentSizeEstimate() function calculates the current estimate size, but was being called 2 or 3 times for each key added. I changed the class to maintain a running estimate (equal to the original calculation) so that the function can return an already calculated value.
- The code in BlockBuilder::Add() that calculated the shared bytes between the last key and the new key duplicated what Slice::difference_offset does, so I replaced it with the standard function.
- BlockBuilder::Add() had code to copy just the changed portion into the last key value (and asserted that it now matched the new key). It is more efficient just to copy the whole new key over.
- Moved this same code up into the 'if (use_delta_encoding_)' since the last key value is only needed when delta encoding is on.
- FlushBlockBySizePolicy::BlockAlmostFull calculated a standard deviation value each time it was called, but this information would only change if block_size of block_size_deviation changed, so I created a member variable to hold the value to avoid the calculation each time.
- Each PutVarint??() function has a buffer and calls std::string::append(). Two or three calls in a row could share a buffer and a single call to std::string::append().
Some of these will be helpful outside of the SstFileWriter. I'm not 100% the addition of the move constructor is appropriate as I wonder why this wasn't done before - maybe because of compiler compatibility? I tried it on gcc 4.8 and 4.9.
Test Plan: The changes should not affect the results so the existing tests should all still work and no new tests were added. The value of the changes was seen by manually testing the SstFileWriter class through MyRocks and adding timing code to identify problem areas.
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59607
Summary: fix Rocksdb Unit Test USER_FAILURE
Test Plan: make all check -j64
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60603
Summary:
DB::AddFile(std::string file_path) API that allow them to ingest an SST file created using SstFileWriter
We want to update this interface to be able to accept a list of files that will be ingested, DB::AddFile(std::vector<std::string> file_path_list).
Test Plan:
Add test case `AddExternalSstFileList` in `DBSSTTest`. To make sure:
1. files key ranges are not overlapping with each other
2. each file key range dont overlap with the DB key range
3. make sure no snapshots are held
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58587
Summary: In concurrent memtable insert case, updating counters in MemTable::Add() can count for 5% CPU usage. By batch all the counters and update in the end of the write batch, the CPU overheads are overhead in the use cases where more than one key is updated in one write batch.
Test Plan:
Write throughput increases 12% with this benchmark setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -disable_auto_compactions -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -num=10000000 --writes=1000000 -max_background_flushes=16 -max_write_buffer_number=16 --threads=64 --batch_size=128 -allow_concurrent_memtable_write -enable_write_thread_adaptive_yield
Reviewers: andrewkr, IslamAbdelRahman, ngbronson, igor
Reviewed By: ngbronson
Subscribers: ngbronson, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60495
Summary:
Use @omegaga's awesome feature to avoid use of callbacks for ensuring
SyncPoints happen in a particular thread.
Depends on D60375.
Test Plan:
$ ./auto_roll_logger_test
Reviewers: omegaga, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, omegaga, leveldb
Differential Revision: https://reviews.facebook.net/D60471
Summary: Add markers to sync points. A marked sync point will only be active when it is on the same thread as the marker sync point.
Test Plan: Write a unit test to validate.
Reviewers: sdong, IslamAbdelRahman, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60375
Summary: MyRocks release integration build breaks because we treat warnings caused by unused variables as errors. Variable `edit` is only used in debug builds. Therefore we need to guard it using `#ifndef NDEBUG` check.
Test Plan:
- `[p]arc diff --preview` for the default validation.
- Verify that release build fails before this fix and passes after applying it.
Reviewers: andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60423
Summary: We saw instances where total_log_size is off the real value, but I'm not able to reproduce it. Add more logging to help debugging when it happens again.
Test Plan: Run the unit test and see the logging.
Reviewers: andrewkr, yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60081
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
Summary: Reported in T11889874. When registering the cleanup function we should copy the option so that we can still access it if ReadOptions is deleted.
Test Plan: Add a unit test to reproduce this bug.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60087
Summary: UBSan is unhappy because `cfd` is not initialized. This breaks UBSan build which in turn breaks MyRocks continuous integration with RocksDB which in turns makes me unhappy :-) Fix this.
Test Plan:
- `[p]arc diff --preview` + Sandcastle.
- Verify that `COMPILE_WITH_UBSAN=1 OPT=-g make J=1 ubsan_check` gets past the break.
Reviewers: andrewkr, hermanlee4, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60117
Summary: With max_size_amplification_percent = 0 to make sure that DBTestUniversalCompaction.UniversalCompactionSingleSortedRun tests the configuration to compact to one single sorted run.
Test Plan: Run all existing tests
Reviewers: yhchiang, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60021
Summary:
Overload RepairDB to take vector-of-ColumnFamilyDescriptor, which tells
us CF name + options. Also takes a ColumnFamilyOptions for unspecified column
families encountered during the repair.
One potentially confusing thing is that we store options in the constructor and
don't invoke AddColumnFamily() until discovering the CF in ScanTable. This is
because we don't know the CF ID until we find a table belonging to that CF.
Depends on D59781.
Test Plan:
$ ./repair_test
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59853
Summary:
This diff uses the CF ID and CF name properties in the SST file
to associate recovered data with the proper column family. Depends on D59775.
- In ScanTable(), create column families in VersionSet each time a new one is discovered (via reading SST file properties)
- In ConvertLogToTable(), dump an SST file for every column family with data in the WAL
- In AddTables(), make a VersionEdit per-column family that adds all of that CF's tables
Test Plan:
$ ./repair_test
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59781
Summary:
To support column families, it is easiest to use VersionSet to manage
our column families (if we don't have Versions then ColumnFamilyData always
behaves as a dummy column family). This diff only refactors the existing repair
logic to use VersionSet; the next two parts will add support for multiple
column families.
Test Plan:
$ ./repair_test
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59775
Summary:
Add a read option `background_purge_on_iterator_cleanup` to avoid deleting files in foreground when destroying iterators.
Instead, a job is scheduled in high priority queue and would be executed in a separate background thread.
Test Plan: Add a variant of PurgeObsoleteFileTest. Turn on background purge option in the new test, and use sleeping task to ensure files are deleted in background.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59499
Summary:
DB::AddFile() right now always add the ingested file to L0
update the logic to add the file to the lowest possible level
Test Plan: unit tests
Reviewers: jkedgar, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D59637
Summary: filter_deltes is not a frequently used feature. Remove it.
Test Plan: Run all test suites.
Reviewers: igor, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59427
Summary:
We dont report the bytes that we ingested from AddFile which make the write amplification numbers incorrect
Update InternalStats and add logging for AddFile()
Test Plan: Make sure the code compile and existing tests pass
Reviewers: lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59763
Summary: DBCompactionTest.SkipStatsUpdateTest sometimes fails. I don't see any verification related to the deletes issued. Remove them to avoid the uncertainty.
Test Plan: Run the test.
Reviewers: IslamAbdelRahman, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59613
Summary:
We have alot of code duplication whenever we call FullMerge we keep duplicating the instrumentation and statistics code
This is a simple diff to refactor the code to use TimedFullMerge instead of FullMerge
Test Plan: COMPILE_WITH_ASAN=1 make check -j64
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59577
Summary:
Add option to not flush memtable on open()
In case the option is enabled, don't delete existing log files by not updating log numbers to MANIFEST.
Will still flush if we need to (e.g. memtable full in the middle). In that case we also flush final memtable.
If wal_recovery_mode = kPointInTimeRecovery, do not halt immediately after encounter corruption. Instead, check if seq id of next log file is last_log_sequence + 1. In that case we continue recovery.
Test Plan: See unit test.
Reviewers: dhruba, horuff, sdong
Reviewed By: sdong
Subscribers: benj, yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57813
Summary: It confuses some compilers to have slice.cc under multiple directories. Merge them.
Test Plan: Run existing tests
Reviewers: andrewkr, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59409
Summary: Currently, if users define both of full key bloom and prefix bloom in SST files. During Get(), if full key bloom shows the key may exist, we still go ahead and check prefix bloom. This is wasteful. If bloom filter for full keys exists, we should always ignore prefix bloom in Get().
Test Plan: Run existing tests
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57825
Summary:
memtable_prefix_bloom_probes is not a critical option. Remove it to reduce number of options.
It's easier for users to make mistakes with memtable_prefix_bloom_bits, turn it to memtable_prefix_bloom_bits_ratio
Test Plan: Run all existing tests
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: gunnarku, yoshinorim, MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59199
Summary: Backup options file to private directory
Test Plan:
backupable_db_test.cc, BackupOptions
Modify DB options by calling OpenDB for 3 times. Check the latest options file is in the right place. Also check no redundent files are backuped.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D59373
Summary:
Add a test to detect that when WAL gets truncated,
seq no's are checked to be contiguous.
This test is put in ColumnFamilyTest as it has the necessary
infrastructure/functions for flushing column families, which
we use to ensure 2 active WAL files
Test Plan:
This is a test, no feature has been added.
This test fails today and hence disabled
Reviewers: sdong
Reviewed By: sdong
Subscribers: lgalanis, dhruba, andrewkr, pritamdamania
Differential Revision: https://reviews.facebook.net/D59253
Summary: With `table_options.cache_index_and_filter_blocks = true`, index and filter blocks are stored in block cache. Then people are curious how much of the block cache total size is used by indexes and bloom filters. It will be nice we have a way to report that. It can help people tune performance and plan for optimized hardware setting. We add several enum values for db Statistics. BLOCK_CACHE_INDEX/FILTER_BYTES_INSERT - BLOCK_CACHE_INDEX/FILTER_BYTES_ERASE = current INDEX/FILTER total block size in bytes.
Test Plan:
write a test case called `DBBlockCacheTest.IndexAndFilterBlocksStats`. The result is:
```
[gzh@dev9927.prn1 ~/local/rocksdb] make db_block_cache_test -j64 && ./db_block_cache_test --gtest_filter=DBBlockCacheTest.IndexAndFilterBlocksStats
Makefile:101: Warning: Compiling in debug mode. Don't use the resulting binary in production
GEN util/build_version.cc
make: `db_block_cache_test' is up to date.
Note: Google Test filter = DBBlockCacheTest.IndexAndFilterBlocksStats
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from DBBlockCacheTest
[ RUN ] DBBlockCacheTest.IndexAndFilterBlocksStats
[ OK ] DBBlockCacheTest.IndexAndFilterBlocksStats (689 ms)
[----------] 1 test from DBBlockCacheTest (689 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (689 ms total)
[ PASSED ] 1 test.
```
Reviewers: IslamAbdelRahman, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58677
Summary:
MemTableList::current_ could be written by background flush thread and
simultaneously read in the user thread (NumNotFlushed() is used in
SwitchMemtable()). Use the lock to prevent this case. Found the error from tsan.
Related: D58833
Test Plan:
$ OPT=-g COMPILE_WITH_TSAN=1 make -j64 db_test
$ TEST_TMPDIR=/dev/shm/rocksdb ./db_test --gtest_filter=DBTest.RepeatedWritesToSameKey
Reviewers: lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59139
* Create a callback for memtable becoming immutable
Create a callback for memtable becoming immutable
Create a callback for memtable becoming immutable
moved notification outside the lock
Move sealed notification to unlocked portion of SwitchMemtable
* fix lite build
Summary:
We see some write stalls because of number of unflushed memtables. With existing logging I couldn't figure out what's happening exactly. See internal task t11446054 for details if interested. This diff adds:
- logging of memtable creation at info level; I wanted it on multiple occasions for different reasons; also include number of immutable memtables,
- logging of number of remaining immutable memtables after a flush.
Test Plan: ran tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58833
Summary: We added more table properties for each SST file, so when using 2KB SST file size, the estimated size of SST files is off by almost half, causing the LSM tree structure not as expected. Fix it by making file size 4x as previously, as well as LSM base size. Also avoid the sleeping based synchronization and turn to use sync points.
Test Plan: Run paralell unit tests multiple times and make sure they always pass.
Reviewers: IslamAbdelRahman, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58749
Summary: Make CompactionOptionsFIFO a part of mutable_cf_options
Test Plan: UT
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, lgalanis, dhruba
Differential Revision: https://reviews.facebook.net/D58653
kPointInTimeRecovery is indistinguishable from
kTolerateCorruptedTailRecords in recycle mode since we define
the "end" of the log as the first corrupt record we encounter.
kAbsoluteConsistency doesn't make sense because even a clean
shutdown leaves old junk at the end of the log file.
Signed-off-by: Sage Weil <sage@redhat.com>
If we are in kTolerateCorruptedTailRecords, treat these
errors as the end of the log. This is particularly
important for recycled logs, where we will regularly see
corrupted headers (bad length or checksum) when replaying
a log. If we are aligned with a block boundary or get lucky,
we will land on an old header and see the log number
mismatch, but more commonly we will land midway through
some previous block and record and effectively see noise.
These must be treated as the end of the log in order for
recycling to work.
This makes the LogTest.Recycle/1 test pass.
We also modify a number of existing tests because the
recycled log files behave fundamentally differently in that
they always stop when they reach the first bad record.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary:
A couple of notes from the diff:
- The namespace block I added at the top of table_properties_collector.cc was in reaction to an issue i was having with PutVarint64 and reusing the "val" string. I'm not sure this is the cleanest way of doing this, but abstracting this out at least results in the correct behavior.
- I chose "rocksdb.merge.operands" as the property name. I am open to suggestions for better names.
- The change to sst_dump_tool.cc seems a bit inelegant to me. Is there a better way to do the if-else block?
Test Plan:
I added a test case in table_properties_collector_test.cc. It adds two merge operands and checks to make sure that both of them are reflected by GetMergeOperands. It also checks to make sure the wasPropertyPresent bool is properly set in the method.
Running both of these tests should pass:
./table_properties_collector_test
./sst_dump_test
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58119
Summary:
This is a part of effort to reduce the size of db_test.cc. We move the following tests to a separate file `db_io_failure_test.cc`:
* DropWrites
* DropWritesFlush
* NoSpaceCompactRange
* NonWritableFileSystem
* ManifestWriteError
* PutFailsParanoid
Test Plan: Run `make check` to see if the tests are working properly.
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58341
Summary:
NotifyOnCompactionCompleted can unlock the mutex.
That mean that we can schedule a background compaction that will start before we ReleaseCompactionFiles().
Test Plan:
added unittest
existing unittest
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: yoshinorim, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58065
Summary: This tests that a prepared transaction is not lost after several crashes, restarts, and memtable flushes.
Test Plan: TwoPhaseLongPrepareTest
Reviewers: sdong
Subscribers: hermanlee4, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58185
Summary:
- Make sure we clean up recovered_transactions_ on DBImpl destructor
- delete leaked txns and env in TransactionTest
Test Plan: Run transaction_test under valgrind
Reviewers: sdong, andrewkr, yhchiang, horuff
Reviewed By: horuff
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58263
Summary:
Added a new abstraction to cache page to RocksDB designed for the read
cache use.
RocksDB current block cache is more of an object cache. For the persistent read cache
project, what we need is a page cache equivalent. This changes adds a cache
abstraction to RocksDB to cache pages called PersistentCache. PersistentCache can cache
uncompressed pages or raw pages (content as in filesystem). The user can
choose to operate PersistentCache either in COMPRESSED or UNCOMPRESSED mode.
Blame Rev:
Test Plan: Run unit tests
Reviewers: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55707
Summary: DBTestXactLogIterator.TransactionLogIterator was failing due the sequence gaps. This was caused by an off-by-one error when calculating the new sequence number after recovering from logs.
Test Plan: db_log_iter_test
Reviewers: andrewkr
Subscribers: andrewkr, hermanlee4, dhruba, IslamAbdelRahman
Differential Revision: https://reviews.facebook.net/D58053
Summary:
GetObsoleteFiles() and LogAndApply() functions modify obsolete_manifests_ vector
we need to make sure that the mutex is held when we modify the obsolete_manifests_
Test Plan: run the test under TSAN
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58011
Summary:
1. prepare()
2. crash
3. recover
4. commit()
5. crash
6. data is lost
This is due to the transaction data still only residing in the WAL but because the logs were flushed on the first recovery the data is ignored on the second recovery. We must scan all logs found on recovery and only ignore redundant data at the time of replay. It is not possible to know which logs still contain relevant data at time of recovery. We cannot simply ignore a log because all of the non-2pc data it contains has already been written to L0.
The changes made to MemTableInserter are to ensure that prepared sections are still recovered even if all of the non-2pc data in that log has already been flushed to L0.
Test Plan: Provided test.
Reviewers: sdong
Subscribers: andrewkr, hermanlee4, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57729
Summary:
Consider the following WAL with 4 batch entries prefixed with their sequence at time of memtable insert.
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(a)]
[1: BEGIN_PREPARE, PUT, PUT, PUT, PUT, END_PREPARE(b)]
[4: COMMIT(a)]
[7: COMMIT(b)]
The first two batches do not consume any sequence numbers so are both prefixed with seq=1.
For 2pc commit, memtable insertion takes place before COMMIT batch is written to WAL.
We can see that sequence number consumption takes place between WAL entries giving us the seemingly sparse sequence prefix for WAL entries.
This is a valid WAL.
Because with 2PC markers one WriteBatch points to another batch containing its inserts a writebatch can consume more or less sequence numbers than the number of sequence consuming entries that it contains.
We can see that, given the entries in the WAL, 6 sequence ids were consumed. Yet on recovery the maximum sequence consumed would be 7 + 3 (the number of sequence numbers consumed by COMMIT(b))
So, now upon recovery we must track the actual consumption of sequence numbers.
In the provided scenario there will be no sequence gaps, but it is possible to produce a sequence gap. This should not be a problem though. correct?
Test Plan: provided test.
Reviewers: sdong
Subscribers: andrewkr, leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D57645
Summary:
This diff is built on top of WriteBatch modification: https://reviews.facebook.net/D54093 and adds the required functionality to rocksdb core necessary for rocksdb to support 2PC.
modfication of DBImpl::WriteImpl()
- added two arguments *uint64_t log_used = nullptr, uint64_t log_ref = 0;
- *log_used is an output argument which will return the log number which the incoming batch was inserted into, 0 if no WAL insert took place.
- log_ref is a supplied log_number which all memtables inserted into will reference after the batch insert takes place. This number will reside in 'FindMinPrepLogReferencedByMemTable()' until all Memtables insertinto have flushed.
- Recovery/writepath is now aware of prepared batches and commit and rollback markers.
Test Plan: There is currently no test on this diff. All testing of this functionality takes place in the Transaction layer/diff but I will add some testing.
Reviewers: IslamAbdelRahman, sdong
Subscribers: leveldb, santoshb, andrewkr, vasilep, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D56919
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: leveldb, dhruba, vasilep, andrewkr
Differential Revision: https://reviews.facebook.net/D57867
Summary:
Add a new option that can be used to set a specific compression algorithm for bottommost level.
This option will only affect levels larger than base level.
I have also updated CompactionJobInfo to include the compression algorithm used in compaction
Test Plan:
added new unittest
existing unittests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: lightmark, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D57669
Summary: Currently we estimate bytes needed for compaction by assuming fanout value to be level multiplier. It overestimates when size of a level exceeds the target by large. We estimate by the ratio of actual sizes in levels instead.
Test Plan: Fix existing test cases and add a new one.
Reviewers: IslamAbdelRahman, igor, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57789
Summary: Fixing error with win build where we compare int64_t with size_t.
Test Plan: make check
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57885
Summary: This is to provide a way for users to skip prefix bloom in point look-up.
Test Plan: Add a new unit test scenario.
Reviewers: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57747
Summary: This test is failing under valgrind because we dont delete the Env that we allocated
Test Plan: run the test under valgrind
Reviewers: andrewkr, yhchiang, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57693
Summary: Fixing lite build broke in unit test. `FilesPerLevel()` depends on `DB::GetProperty()`, which lite build doesn't support.
Test Plan: OPT=-DROCKSDB_LITE make check -j64
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57651
Summary:
Add an option `iterator_readahead_size` to `ReadOptions` to enable
configurable readahead for iterators similar to the corresponding
option for compaction.
Test Plan:
```
make commit_prereq
```
Reviewers: kumar.rangarajan, ott, igor, sdong
Reviewed By: sdong
Subscribers: yiwu, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55419
Summary: We should not use IterKey::SetKey with copy = false except if we are pinning the iterator thru it's life time, otherwise we may release the temporarily pinned blocks and in this case the IterKey will be pointing to freed memory
Test Plan: added a new test
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57561
Using explicit 64-bit type in conditional in platforms above 32-bits
This appears to be necessary on Mac OSX as std::conditional does not appear to short circuit and evaluates the third template arg
Making the third template arg be 64 bits explicitly works around this problem and will work on both 32 bit and 64+ bit platforms.
Summary: GetCurrentMutableCFOptions() can only be called when DB mutex is held so we cannot call it in CompactionJob::ProcessKeyValueCompaction() since it's not holding the db mutex
Test Plan: make check -j64
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57471
Summary: Adds three new WriteBatch data types: Prepare(xid), Commit(xid), Rollback(xid). Prepare(xid) should precede the (single) operation to which is applies. There can obviously be multiple Prepare(xid) markers. There should only be one Rollback(xid) or Commit(xid) marker yet not both. None of this logic is currently enforced and will most likely be implemented further up such as in the memtableinserter. All three markers are similar to PutLogData in that they are writebatch meta-data, ie stored but not counted. All three markers differ from PutLogData in that they will actually be written to disk. As for WriteBatchWithIndex, Prepare, Commit, Rollback are all implemented just as PutLogData and none are tested just as PutLogData.
Test Plan: single unit test in write_batch_test.
Reviewers: hermanlee4, sdong, anthony
Subscribers: andrewkr, vasilep, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54093
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.
Test Plan: unit test.
Reviewers: dhruba, yhchiang, ott, sdong
Reviewed By: sdong
Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D56337
Summary:
Changing several option defaults:
options.max_open_files changes from 5000 to -1
options.base_background_compactions changes from max_background_compactions to 1
options.wal_recovery_mode changes from kTolerateCorruptedTailRecords to kTolerateCorruptedTailRecords
options.compaction_pri changes from kByCompensatedSize to kByCompensatedSize
Test Plan: Write unit tests to see OldDefaults() works as expected.
Reviewers: IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: MarkCallaghan, yiwu, kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56427
Summary: Warning is printed out with USE_CLANG=1 when including jemalloc.h. Disable it in that case.
Test Plan: Run db_bench with USE_CLANG=1 and not. Make sure they can all build and jemalloc status is printed out in the case where USE_CLANG is not set.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57399
Summary:
This test relies on "rocksdb.num-files-at-levelN" property that isn't
implemented in rocksdb lite. So we will compile it only for non-lite builds.
Test Plan:
$ make -j40 check 'OPT=-g -DROCKSDB_LITE'
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57387
Summary:
There was one narrowing conversion in D52287 that only showed up with
clang on osx.
Test Plan:
$ make clean && USE_CLANG=1 DISABLE_JEMALLOC=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j32 check
Reviewers: sdong, lightmark, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57357
Summary: There were a few narrowing conversions that clang didn't like.
Test Plan:
$ make clean && USE_CLANG=1 DISABLE_JEMALLOC=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make -j32 check
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57351
Summary: It looks like we mistakenly enable JEMALLOC even if it's not available on the machine, that's why travis is failing
Test Plan:
check on my devserver
check on my mac
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57345
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary:
Introduced option to dump malloc statistics using new option flag.
Added new command line option to db_bench tool to enable this
funtionality.
Also extended build to support environments with/without jemalloc.
Test Plan:
1) Build rocksdb using `make` command. Launch the following command
`./db_bench --benchmarks=fillrandom --dump_malloc_stats=true
--num=10000000` end verified that jemalloc dump is present in LOG file.
2) Build rocksdb using `DISABLE_JEMALLOC=1 make db_bench -j32` and ran
the same db_bench tool and found the following message in LOG file:
"Please compile with jemalloc to enable malloc dump".
3) Also built rocksdb using `make` command on MacOS to verify behavior
in non-FB environment.
Also to debug build configuration change temporary changed
AM_DEFAULT_VERBOSITY = 1 in Makefile to see compiler and build
tools output. For case 1) -DROCKSDB_JEMALLOC was present in compiler
command line. For both 2) and 3) this flag was not present.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57321
Summary: CompactedDB skips memtable. So we shouldn't use compacted DB if there is outstanding WAL files.
Test Plan: Change to options.max_open_files = -1 perf context test to create a compacted DB, which we shouldn't do.
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57057
Summary:
While trying to reuse PinData() / ReleasePinnedData() .. to optimize away some memcpys I realized that there is a significant overhead for using PinData() / ReleasePinnedData if they were called many times.
This diff refactor the pinning logic by introducing PinnedIteratorsManager a centralized component that will be created once and will be notified whenever we need to Pin an Iterator. This implementation have much less overhead than the original implementation
Test Plan:
make check -j64
COMPILE_WITH_ASAN=1 make check -j64
Reviewers: yhchiang, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56493
Summary:
The current implementation find the first different byte and try to increment it, if it cannot it return the original key
we can improve this by keep going after the first different byte to find the first non 0xFF byte and increment it
After trying this patch on some logdevice sst files I see decrease in there index block size by 8.5%
Test Plan: existing tests and updated test
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56241
Summary:
In this test some times automatic compactions do everything and Manual compaction become a no-op.
Update the test to make sure manual compaction is not a no-op
Test Plan: run the test
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57189
Summary:
Now we collect compaction stats per column family, but report default colum family's stat as compaction stats for DB.
Fix it by reporting compaction stats per column family instead.
Test Plan: Run db_bench with --num_column_families=4 and see the number fixed.
Reviewers: IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57063
Summary:
In https://reviews.facebook.net/D56271, we fixed an issue where
we consider flush as compaction. However, that makes us mistakenly
count FLUSH_WRITE_BYTES twice (one in flush_job and one in db_impl.)
This patch removes the one incremented in db_impl.
Test Plan: db_test
Reviewers: yiwu, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57111
* Musl libc does not provide adaptive mutex. Added feature test for PTHREAD_MUTEX_ADAPTIVE_NP.
* Musl libc does not provide backtrace(3). Added a feature check for backtrace(3).
* Fixed compiler error.
* Musl libc does not implement backtrace(3). Added platform check for libexecinfo.
* Alpine does not appear to support gcc -pg option. By default (gcc has PIE option enabled) it fails with:
gcc: error: -pie and -pg|p|profile are incompatible when linking
When -fno-PIE and -nopie are used it fails with:
/usr/lib/gcc/x86_64-alpine-linux-musl/5.3.0/../../../../x86_64-alpine-linux-musl/bin/ld: cannot find gcrt1.o: No such file or directory
Added gcc -pg platform test and output PROFILING_FLAGS accordingly. Replaced pg var in Makefile with PROFILING_FLAGS.
* fix segfault when TEST_IOCTL_FRIENDLY_TMPDIR is undefined and default candidates are not suitable
* use ASSERT_DOUBLE_EQ instead of ASSERT_EQ
* When compiled with ROCKSDB_MALLOC_USABLE_SIZE UniversalCompactionFourPaths and UniversalCompactionSecondPathRatio tests fail due to premature memtable flushes on systems with 16-byte alignment. Arena runs out of block space before GenerateNewFile() completes.
Increased options.write_buffer_size.
Summary:
This is needed so we can measure compression ratio improvements
achieved by D52287.
The property compares raw data size against the total file size for a given
level. If the level is empty it should return 0.0.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56967
Comparable with Snappy on comp ratio.
Implemented using Windows API, does not require external package.
Avaiable since Windows 8 and server 2012.
Use -DXPRESS=1 with CMake to enable.
Summary: We need to enable sync_point processing before creating the SstFileManager to ensure that we are holding the bg delete scheduler thread from running
Test Plan:
run the test
debug using printf
Reviewers: sdong, yhchiang, yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56871
Summary: D56715 move some of the tests from db_test to db_block_cache_test. Some of them should be disabled in lite build.
Test Plan:
make check -j32
OPT='-DROCKSDB_LITE' make check -j32
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56907
Summary: write_callback_test fails if previous run didn't finish cleanly. Clean the DB before runing the test.
Test Plan: Run the test that see it doesn't fail any more.
Reviewers: andrewkr, yhchiang, yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56859
Summary:
Solution is not to change db sequence number to start from 1 because 0 value is used in multiple other places.
Fix covers only compact_iterator::findEarliestVisibleSnapshot with updated logic to support snapshot's numbering starting from 0.
Test Plan:
run:
make all check
it should pass all tests
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: lgalanis, mgalushka, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56601
Summary: In DBTest.HardLimit, multiple flushes may merge into one, based on thread scheduling. Avoid it by waiting each flush to finish before generating the next one.
Test Plan: Run test in parallel several times and see it doesn't fail any more.
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yiwu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56853
Summary: DBTestUniversalCompaction, IncreaseUniversalCompactionNumLevels fails one in about 30 runs when running in parallel. We wait for compaction after each flush to make the compaction behavior deterministic.
Test Plan: Run the test 1000 times in parallel and it still passes.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: kradhakrishnan, yiwu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56841
Summary: It is useful to print out IO stats in flush jobs too. Extend options.compaction_measure_io_stats to flush jobs and raname it.
Test Plan: Try db_bench and see the stats are printed out.
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: kradhakrishnan, yiwu, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56769
Summary:
In the case where we can't find a filter block, there is not much benefit of doing the binary search and see whether the index key has the prefix. With the change, we blindly return true if we can't get the filter.
It also fixes missing row cases for reverse comparator with full bloom.
Test Plan: Add a test case that used to fail.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: kradhakrishnan, yiwu, hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56697
Summary: The reason for this test flakiness is that we try to verify that number of files in L0 is 3 after flushing the 3rd file although we may have a compaction running in the background that may finish before we do the check and the 3 L0 files are converted to 1 L1 file
Test Plan: Run a modified version of the test that sleep before doing the check
Reviewers: sdong, andrewkr, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56643
Summary:
Full block checking should be a good enough indication of prefix existance. No need to further check data block.
This also fixes wrong results when using prefix bloom and reverse bitwise comparator.
Test Plan: Will add a unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: hermanlee4, yoshinorim, yiwu, kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56625
Summary:
In some case, it is possible to have two concesutive SST files might sharing
same boundary keys. However, in the assertion in Compaction::ShouldStopBefore,
it exclude such possibility.
This patch fix this issue by relaxing the assertion to allow the equal case.
Test Plan: rocksdb tests
Reviewers: IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55875
Summary: Fixed a bug in RocksDB Statistics where flush is considered as compaction
Test Plan: unit test
Reviewers: sdong, IslamAbdelRahman, rven, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56271
Summary: The code assumes that if use_mmap_reads is on then use_os_buffer is also on. This make sense as by using memory mapped files for reading you are expecting the OS to cache what it needs. Add code to make sure the user does not turn off use_os_buffer when they turn on use_mmap_reads
Test Plan: New test: DBTest.MMapAndBufferOptions
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56397
Summary:
Added the column family name to the properties block. This property
is omitted only if the property is unavailable, such as when RepairDB()
writes SST files.
In a next diff, I will change RepairDB to use this new property for
deciding to which column family an existing SST file belongs. If this
property is missing, it will add it to the "unknown" column family (same
as its existing behavior).
Test Plan:
New unit test:
$ ./db_table_properties_test --gtest_filter=DBTablePropertiesTest.GetColumnFamilyNameProperty
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55605
Summary: We use object `v` in the error message, which is not initialized if the edit is column family manipulation. This doesn't provide much useful info, so this diff is removing it. Instead, it dumps actual VersionEdit contents.
Test Plan: compiles. would be great to get tests in version_set_test.cc that cover cases where a file write fails
Reviewers: sdong, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56349
Summary:
There is a hardcoded constraint in our statistics collection that prevents reading properties from more than 20 SST files. This means our statistics will be very inaccurate for databases with > 20 files since additional files are just ignored. The purpose of constraining the number of files used is to bound the I/O performed during statistics collection, since these statistics need to be recomputed every time the database reopened.
However, this constraint doesn't take into account the case where option "max_open_files" is -1. In that case, all the file metadata has already been read, so MaybeInitializeFileMetaData() won't incur any I/O cost. so this diff gets rid of the 20-file constraint in case max_open_files == -1.
Test Plan:
write into unit test db/db_properties_test.cc - "ValidateSampleNumber".
We generate 20 files with 2 rows and 10 files with 1 row.
If max_open_files !=-1, the `rocksdb.estimate-num-keys` should be (10*1 + 10*2)/20 * 30 = 45. Otherwise, it should be the ground truth, 50.
{F1089153}
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56253
Summary:
- Put key offset and key size in WriteBatchIndexEntry
- Use vector for comparators in WriteBatchEntryComparator
I use a slightly modified version of @yoshinorim code to benchmark
https://gist.github.com/IslamAbdelRahman/b120f4fba8d6ff7d58d2
For Put I create a transaction that put a 1000000 keys and measure the time spent without commit.
For GetForUpdate I read the keys that I added in the Put transaction.
Original time:
```
rm -rf /dev/shm/rocksdb-example/
./txn_bench put 1000000
1000000 OK Ops | took 3.679 seconds
./txn_bench get_for_update 1000000
1000000 OK Ops | took 3.940 seconds
```
New Time
```
rm -rf /dev/shm/rocksdb-example/
./txn_bench put 1000000
1000000 OK Ops | took 2.727 seconds
./txn_bench get_for_update 1000000
1000000 OK Ops | took 3.880 seconds
```
It looks like there is no significant improvement in GetForUpdate() but we can see ~30% improvement in Put()
Test Plan: unittests
Reviewers: yhchiang, anthony, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D55539
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
Summary: Change some RocksDB default options to make it more friendly to server workloads.
Test Plan: Run all existing tests
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: sumeet, muthu, benj, MarkCallaghan, igor, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55941
record.size() should not be less than 12.
This "magic number" seems to be the WriteBatch header (8 byte sequence
and 4 byte count). Replaced all the places where "12" was used
by WriteBatchInternal::kHeader.
Summary: We were not measuring the time spent in merge_operator when called from Version::Get()
Test Plan: added a unittest
Reviewers: sdong, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55905
Summary:
When subcompaction is used, all subcompactions share the same Compaction
pointer in CompactionJob while each subcompaction all keeps their mutable
stats in SubcompactionState. However, there're still some mutable part
that is currently store in the shared Compaction pointer.
This patch makes two changes:
1. Make the shared Compaction pointer const so that it can never be modified
during the compaction.
2. Move necessary states from Compaction to SubcompactionState.
3. Make functions of Compaction const if the function does not modify
its internal state.
Test Plan: rocksdb and MyRocks test
Reviewers: sdong, kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, yoshinorim, gunnarku, leveldb
Differential Revision: https://reviews.facebook.net/D55923
Summary:
I ran into this assert when stress testing transactions. It's pretty easy to repro.
Changing VersionSet::last_sequence_ to start at 1 seems pretty straightforward. We would just need to change the 4 callers of SetLastSequence(), including recovery code. I'd make this change myself, but I do not have enough time to test changes to recovery code-paths this week. But checking in this test case (disabled) for future fixing.
Test Plan: n/a
Reviewers: yhchiang, kradhakrishnan, andrewkr, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55311
Summary:
Basic test cases:
- Manifest is lost or corrupt
- Manifest refers to too many or too few SST files
- SST file is corrupt
- Unflushed data is present when RepairDB is called
Depends on D55065 for its CreateFile() function in file_utils
Test Plan: Ran the tests.
Reviewers: IslamAbdelRahman, yhchiang, yoshinorim, sdong
Reviewed By: sdong
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55485
Test Plan: make -j40 check OPT=-g, on both /tmp and /dev/shm
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55701
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary:
DBBlockCacheTest.TestWithCompressedBlockCache is depending on compression using snappy, so this test fail when snappy is not available
block this test when we don't have snappy
https://ci-builds.fb.com/view/rocksdb/job/rocksdb_no_compression/833/console
Test Plan: run the test when compression libraries are not avaliable
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55413
Summary:
The pre-existing code is trying to clamp between 65,536 and 0,
resulting in clamping to 65,536, resulting in very small buffers,
resulting in ShouldFlushNow() being true quite easily,
resulting in assertion failing and database performance
being "not what it should be".
https://github.com/facebook/rocksdb/issues/1018
Test Plan: make check
Reviewers: sdong, andrewkr, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55455
Summary:
In block based table reader, wow we put index reader to block cache, which can be retrieved after DB restart. However, index reader may reference internal comparator, which can be destroyed after DB restarts, causing problems.
Fix it by making cache key identical per table reader.
Test Plan: Add a new test which failed with out the commit but now pass.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: maro, yhchiang, kradhakrishnan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55287
Summary:
Fix for https://github.com/facebook/mysql-5.6/issues/174
When there is no old files to purge, vector.at(i) function was crashing
if (old_info_log_file_count != 0 &&
old_info_log_file_count >= db_options_.keep_log_file_num) {
std::sort(old_info_log_files.begin(), old_info_log_files.end());
size_t end = old_info_log_file_count - db_options_.keep_log_file_num;
for (unsigned int i = 0; i <= end; i++) {
std::string& to_delete = old_info_log_files.at(i);
Added check to old_info_log_file_count be non zero.
Test Plan: run existing tests
Reviewers: gunnarku, vasilep, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, webscalesql-eng, dhruba
Differential Revision: https://reviews.facebook.net/D55245
Summary:
- Keep track of obsolete manifests in VersionSet
- Updated FindObsoleteFiles() to put obsolete manifests in the JobContext for later use by PurgeObsoleteFiles()
- Added test case that verifies a stale manifest is deleted by a non-full purge
Test Plan:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
Reviewers: IslamAbdelRahman, yoshinorim, sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55269
Summary:
Cache to have an option to fail Cache::Insert() when full. Update call sites to check status and handle error.
I totally have no idea what's correct behavior of all the call sites when they encounter error. Please let me know if you see something wrong or more unit test is needed.
Test Plan: make check -j32, see tests pass.
Reviewers: anthony, yhchiang, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54705
Summary:
This is a follow-up patch of https://reviews.facebook.net/D54891.
As the information about files being compacted will also be used
when making compaction decision, it is necessary to update the compaction
score when a compaction plan has been made but not yet execute.
This patch adds a missing call to update the compaction score in
CompactFiles().
Test Plan: compact_files_test
Reviewers: sdong, IslamAbdelRahman, kradhakrishnan, yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55227
Summary:
ReleaseCompactionFiles must be called when DB mutex is held,
but the documentation is mission.
Test Plan: no code change
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54987
Summary: I realized I again is wrong about the naming convention. Let me change it to the correct one.
Test Plan: Run unit tests.
Reviewers: IslamAbdelRahman, kradhakrishnan, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55041
Summary:
Currently, when rocksdb tries to run manual compaction to refit data into a level,
there's a ReFitLevel() process that requires no bg work is currently running.
When RocksDB plans to ReFitLevel(), it will do the following:
1. pause scheduling new bg work.
2. wait until all bg work finished
3. do the ReFitLevel()
4. unpause scheduling new bg work.
However, as it pause scheduling new bg work at step one and waiting for all bg work
finished in step 2, RocksDB will stop flushing until all bg work is done (which
could take a long time.)
This patch fix this issue by changing the way ReFitLevel() pause the background work:
1. pause scheduling compaction.
2. wait until all bg work finished.
3. pause scheduling flush
4. do ReFitLevel()
5. unpause both flush and compaction.
The major difference is that. We only pause scheduling compaction in step 1 and wait
for all bg work finished in step 2. This prevent flush being blocked for a long time.
Although there's a very rare case that ReFitLevel() might be in starvation in step 2,
but it's less likely the case as flush typically finish very fast.
Test Plan: existing test.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55029
Summary:
The call to
```
CaptureCurrentFileNumberInPendingOutputs()
```
should be before
```
versions_->NewFileNumber()
```
Right now we are not actually protecting the file from being deleted
Test Plan: make check
Reviewers: sdong, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54645
Summary: We always put compaction to level0_compactions_in_progress_ for universal compaction, so we should also remove it. The bug causes assert failure when running manual compaction.
Test Plan:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom,compact --subcompactions=16 --compaction_style=1
always fails on my host. After the fix, it doesn't fail any more.
Reviewers: IslamAbdelRahman, andrewkr, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55017
Summary: We want to provide a way to detect whether an iterator is stale and needs to be recreated. Add a iterator property to return version number.
Test Plan: Add two unit tests for it.
Reviewers: IslamAbdelRahman, yhchiang, anthony, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54921
Summary: Now we skip to add boundary keys to subcompaction candidates since we see an empty level. This makes subcompaction almost disabled for universal compaction. We should consider all files instead.
Test Plan: Run existing tests.
Reviewers: IslamAbdelRahman, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55005
Summary:
In some situations the DB will scan all existing files in the DB path and delete the ones that are Obsolete.
If this happen during adding an external sst file. this could cause the file to be deleted while we are adding it.
This diff fix this issue
Test Plan:
unit test to reproduce the bug
existing unit tests
Reviewers: sdong, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54627
Summary: Add a DB Property "rocksdb.current_version_number" for users to monitor version changes and stale iterators.
Test Plan: Add a unit test.
Reviewers: andrewkr, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54927
Summary: After we made manual compaction runnable concurrently with automaticallly compaction, we need to run ComputeCompactionScore() to prepare a coming compaction picking call before the compaction finishes.
Test Plan: Run existing tests.
Reviewers: yhchiang, IslamAbdelRahman, andrewkr, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54891
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator
Test Plan: Rerun existing tests and add a negative test case.
Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54783
Summary:
Fixed two related race conditions in backup creation.
(1) CreateNewBackup() uses DB::DisableFileDeletions() to prevent table files
from being deleted while it is copying; however, the MANIFEST file could still
rotate during this time. The fix is to stop deleting the old manifest in the
rotation logic. It will be deleted safely later when PurgeObsoleteFiles() runs
(can only happen when file deletions are enabled).
(2) CreateNewBackup() did not account for the CURRENT file being mutable.
This is significant because the files returned by GetLiveFiles() contain a
particular manifest filename, but the manifest to which CURRENT refers can
change at any time. This causes problems when CURRENT changes between the call
to GetLiveFiles() and when it's copied to the backup directory. To workaround this, I
manually forge a CURRENT file referring to the manifest filename returned in
GetLiveFiles().
(2) also applies to the checkpointing code, so let me know if this approach is
good and I'll make the same change there.
Test Plan:
new test for roll manifest during backup creation.
running the test before this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
IO error: /tmp/rocksdbtest-9383/backupable_db/MANIFEST-000001: No such file or directory
running the test after this change:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
...
[ RUN ] BackupableDBTest.ChangeManifestDuringBackupCreation
[ OK ] BackupableDBTest.ChangeManifestDuringBackupCreation (2836 ms)
Reviewers: IslamAbdelRahman, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54711
Summary:
Based on thread scheduling, DBTestUniversalCompaction.IncreaseUniversalCompactionNumLevels can fail to flush enough files to trigger expected compactions. Fix it by waiting for flush after inserting each key.
There are failrue reported:
db/db_universal_compaction_test.cc:1134: Failure
Expected: (NumTableFilesAtLevel(options.num_levels - 1, 1)) > (0), actual: 0 vs 0
but I can't repro it. Try to fix the bug and see whether it goes away.
Test Plan: Run the test multiple time.
Reviewers: IslamAbdelRahman, anthony, andrewkr, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54747
Summary: Add a test case in ColumnFamilyTest.ReadDroppedColumnFamily to make sure existing iterator is not impacted by column family dropping.
Test Plan: N/A
Reviewers: igor, yhchiang, anthony, andrewkr, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54657
Summary: DBImpl::SyncWAL() releases db mutex before calling DBImpl::MarkLogsSynced(), while inside DBImpl::MarkLogsSynced() we assert there is none or one outstanding log file. However, a memtable switch can happen in between and causing two or outstanding logs there, failing the assert. The diff adds a unit test that repros the issue and fix the assert so that the unit test passes.
Test Plan: Run the new tests.
Reviewers: anthony, kolmike, yhchiang, IslamAbdelRahman, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54621
Summary:
There was a race condition in the test where the rolling thread
acquired the mutex before the flush thread pinned the logger. Rather than add
more complicated synchronization to fix it, I followed Siying's suggestion to
use SyncPoint in the test code.
Comments in the LoadDependency() invocation explain the reason for each of the
sync points.
Test Plan:
Ran test 1000 times for tsan/asan. Will wait for all sandcastle tests
to finish before committing since this is a tricky test.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54615
Summary:
We started getting two kinds of crashes since we started using `DB::CompactFiles()`:
(1) `CompactFiles()` fails saying something like "/data/logdevice/4440/shard12/012302.sst: No such file or directory", and presumably makes DB read-only,
(2) DB fails to open saying "Corruption: Can't access /267000.sst: IO error: /data/logdevice/4440/shard1/267000.sst: No such file or directory".
AFAICT, both can be explained by background thread deleting compaction output as "obsolete" while it's being written, before it's committed to manifest. If it ends up committed to the manifest, we get (2); if compaction notices the disappearance and fails, we get (1). The internal tasks t10068021 and t10134177 have some details about the investigation that led to this.
Test Plan: `make -j check`; the new test fails to reopen the DB without the fix
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, sdong
Differential Revision: https://reviews.facebook.net/D54561
Summary:
Previously I just slept until the flush_thread was "probably" ready
since proper synchronization in test cases seemed like overkill. But then tsan
complained about it, so I did the synchronization (mostly) properly now.
Test Plan:
$ COMPILE_WITH_TSAN=1 make -j32 auto_roll_logger_test
$ ./auto_roll_logger_test
Reviewers: anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54399
Summary:
Introude SstFileManager::SetMaxAllowedSpaceUsage() that can be used to limit the maximum space usage allowed for RocksDB.
When this limit is exceeded WriteImpl() will fail and return Status::Aborted()
Test Plan: unit testing
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53763
Summary:
For GetLogFileSize() and Flush(), they previously did not follow the
synchronization pattern for accessing logger_. This meant ResetLogger() could
cause logger_ destruction while the unsynchronized functions were accessing it,
causing a segfault.
Also made the mutex instance variable mutable so we can preserve
GetLogFileSize()'s const-ness.
Test Plan:
new test case, it's quite ugly because both threads need to access
one of the functions with SyncPoints (PosixLogger::Flush()), and also special
handling is needed to prevent the mutex and sync points from conflicting.
Reviewers: kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54237
Summary: Currently write_with_callback_test does not test with WAL syncing enabled. This addresses that.
Test Plan: write_with_callback_test
Reviewers: anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D54255
Summary: There is an issue in DBImpl::WriteImpl where if an empty writebatch comes in and sync=true then the logs will be marked as being synced yet the sync never actually happens because there is no data in the writebatch. This causes the next incoming batch to hang while waiting for the logs to complete syncing. This fix syncs logs even if the writebatch is empty.
Test Plan: DoubleEmptyBatch unit test in transaction_test.
Reviewers: yoshinorim, hermanlee4, sdong, ngbronson, anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54057
Summary:
Add a new compaction priority as following:
For every file, we calculate total size of files overalapping with the file in the next level, over the file's size itself. The file with smallest ratio will be picked first.
My "db_bench --fillrandom" shows about 5% less compaction than kOldestSmallestSeqFirst if --hard_pending_compaction_bytes_limit value to keep LSM tree in shape. If not limiting hard_pending_compaction_bytes_limit, improvement is only 1% or 2%.
Test Plan: Add a unit test
Reviewers: andrewkr, kradhakrishnan, anthony, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54075
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary: Previous commit introduces a test that is not supported in LITE. Fix it.
Test Plan: Build the test with ROCKSDB_LITE.
Reviewers: kradhakrishnan, IslamAbdelRahman, anthony, yhchiang, andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53901
Summary: If users turn on concurrent insert but the memtable doesn't support it, they might see unexcepted crash. Fix it by explicitly fail.
Test Plan:
Run different setting of stress_test and make sure it fails correctly.
Will add a unit test too.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, andrewkr, ngbronson
Reviewed By: ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53895
Summary:
copy from task 8196669:
1) Optimistic transactions do not support batching writes from different threads.
2) Pessimistic transactions do not support batching writes if an expiration time is set.
In these 2 cases, we currently do not do any write batching in DBImpl::WriteImpl() because there is a WriteCallback that could decide at the last minute to abort the write. But we could support batching write operations with callbacks if we make sure to process the callbacks correctly.
To do this, we would first need to modify write_thread.cc to stop preventing writes with callbacks from being batched together. Then we would need to change DBImpl::WriteImpl() to call all WriteCallback's in a batch, only write the batches that succeed, and correctly set the state of each batch's WriteThread::Writer.
Test Plan: Added test WriteWithCallbackTest to write_callback_test.cc which creates multiple client threads and verifies that writes are batched and executed properly.
Reviewers: hermanlee4, anthony, ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52863
Summary: Add a new option to BlockBasedTableOptions that will allow us to change the restart interval for the index block
Test Plan: unit tests
Reviewers: yhchiang, anthony, andrewkr, sdong
Reviewed By: sdong
Subscribers: march, dhruba
Differential Revision: https://reviews.facebook.net/D53721
Summary:
InlineSkipList::InsertConcurrently should invalidate the
sequential-insertion cache prev_[] for all inserts of multi-level nodes,
not just those that increase the height of the skip list. The invariant
for prev_ is that prev_[i] (i > 0) is supposed to be the predecessor of
prev_[0] at level i. Before this diff InsertConcurrently could violate
this constraint when inserting a multi-level node after prev_[i] but
before prev_[0].
This diff also reenables kConcurrentSkipList as db_test's
MultiThreaded/MultiThreadedDBTest.MultiThreaded/29.
Test Plan:
1. unit tests
2. temporarily hack kConcurrentSkipList timing so that it is fast but has a 1.5% failure rate on my dev box (1ms stagger on thread launch, 1s test duration, failure rate baseline over 1000 runs)
3. observe 1000 passes post-fix
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D53751
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
Summary: Disable test that is intermittently failing
Test Plan: unit tests
Reviewers: igor, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53715
Summary:
Concurrent memtable adds were incorrectly computing
the last sequence number for a write batch group when the
write batches were not solitary. This is the cause of
https://github.com/facebook/mysql-5.6/issues/155
Test Plan:
1. unit tests
2. new unit test
3. parallel db_bench stress tests with batch size of 10 and asserts enabled
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: IslamAbdelRahman, MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D53595
Summary:
Add unit tests:
(1) insert entries of 8MB key and 3GB value to DB
(2) insert entry of 3GB key and 3GB value into write batch and make sure we can read it.
(3) insert 3 billions of key-value pairs into write batch and make sure we can read it.
Disable them because not all platform can run it.
Test Plan: Run the tests
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53619
Summary:
Following up on D53493, we can still enable the filter-skipping
optimization for last file in L0. It's correct to assume the key will be present
in the last L0 file when we're hit-optimized and L0 is deepest.
The FilePicker encapsulates the state for traversing each level's files, so I
needed to make it expose whether the returned file is last in its level.
Test Plan:
verified below test fails before this patch and passes afterwards.
The change to how the test memtable is populated is needed so file 1 has keys
(0, 30, 60), file 2 has keys (10, 40, 70), etc.
$ ./db_universal_compaction_test --gtest_filter=UniversalCompactionNumLevels/DBTestUniversalCompaction.OptimizeFiltersForHits/*
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53583
Summary:
Fixed the asan error on column_family_test caused by not disabling
SyncPoint.
Test Plan: column_family_test
Reviewers: anthony, rven, kradhakrishnan, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53505
Summary:
If options.base_background_compactions is given, we try to schedule number of compactions not existing this number, only when L0 files increase to certain number, or pending compaction bytes more than certain threshold, we schedule compactions based on options.max_background_compactions.
The watermarks are calculated based on slowdown thresholds.
Test Plan:
Add new test cases in column_family_test.
Adding more unit tests.
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, rven, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D53409
Summary: Now slowing down for the last mem table takes priority against some stopping conditions. This is logically confusing. Fix it.
Test Plan: Run all existing tests.
Reviewers: yhchiang, IslamAbdelRahman, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53529
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size
Test Plan: unit tests
Reviewers: rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, lovro, march, dhruba
Differential Revision: https://reviews.facebook.net/D50469
Summary: It's a regression bug caused by e089db40f9. With the change, if options.optimize_filters_for_hits=true and there are only L0 files (like single level universal compaction), we skip all the files in L0, which is more than necessary. Fix it by always trying to query bloom filter for files in level 0.
Test Plan: Add a unit test for it.
Reviewers: anthony, rven, yhchiang, IslamAbdelRahman, kradhakrishnan, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53493
Summary: Measuring mutex duration will measure time inside DB mutex, which breaks our best practice. Add a stat level in Statistics class. By default, disable to measure the mutex operations.
Test Plan: Add a unit test to make sure it is off by default.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53367
Summary: Similar to D53385 we need to check InDomain before checking the filter block.
Test Plan: unit tests
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53421
Summary:
NewMemEnv() is defined in rocksdb lite but just returns nullptr --
would it be better to just not define it so we can catch issues like this at
compile-time?
Test Plan:
$ make clean && OPT="-DTRAVIS -DROCKSDB_LITE" V=1 make -j32 db_test
$ ./db_test --gtest_filter='DBTest.MemEnvTest'
...
[ PASSED ] 0 tests.
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53427
Summary:
compact_files_test enables SyncPoint but never disable it before
the test terminates. As a result, it might cause heap-use-after-free
error when some code path trying to access the static variable of
SyncPoint when it has already gone out of scope after the main thread
dies.
Test Plan:
COMPILE_WITH_ASAN=1 make compact_files_test -j32
./compact_files_test
Reviewers: sdong, anthony, kradhakrishnan, rven, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53379
Summary:
Right now when we are creating a BlockBasedTable with fill filter block
we add to the filter all the prefixes that are InDomain() based on the prefix_extractor
the problem is that when we read a key from the file, we check the filter block for the prefix whether or not it's InDomain()
Test Plan: unit tests
Reviewers: yhchiang, rven, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53385
Summary:
We can avoid the dependency by forward-declaring ColumnFamilyData and
then treating it as a black box. That means callers of ThreadStatusUtil need to
explicitly provide more options, even if they can be derived from the
ColumnFamilyData, since ThreadStatusUtil doesn't include the definition.
This is part of a series of diffs to eliminate circular dependencies between
directories (e.g., db/* files depending on util/* files and vice-versa).
Test Plan:
$ ./db_test --gtest_filter=DBTest.GetThreadStatus
$ make -j32 commit-prereq
Reviewers: sdong, yhchiang, IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53361
Summary:
I split the db-specific test points out into a separate file under db/
directory. There were also a few bugs to fix in xfunc.{h,cc} that prevented it
from compiling previously; see https://reviews.facebook.net/D36825.
Test Plan:
compilation works now, below command works, will also run "make xfunc".
$ make check ROCKSDB_XFUNC_TEST='managed_new' tests-regexp='DBTest' -j32
Reviewers: sdong, yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53343
Summary: Break down DBTest.Randomized to multiple gtest tests based on config type
Test Plan: Run the test and all tests. Make sure configurations are correctly set
Reviewers: yhchiang, IslamAbdelRahman, rven, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53247
Summary: Timing mutex operations can impact scalability of the system. Add a new perf context level that can measure time counters except for mutex.
Test Plan: Add a new unit test case to make sure it is not set.
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, yhchiang, anthony
Reviewed By: anthony
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53199
Summary: As titled. Also added the kBaseLevel string, which was missing earlier.
Test Plan: built
Reviewers: yhchiang, anthony, rven, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53271
Summary:
SstFileWriter may create an sst file with no entries
Right now this will fail when being ingested using DB::AddFile() saying that the keys are corrupted
Test Plan: make check
Reviewers: yhchiang, rven, anthony, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52815
Summary: Improve testing per discussion in D52989
Test Plan: ran test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53211
Summary: Revert the functionaility of D7809 (but I'm keeping the logging and test code). We decided it was dangerous to ignore sync failures based on attempting to read the data written. The read does not tell us whether the data was synced.
Test Plan: There was no test for the particular functionaility that was reverted. Keeping the test code from D7809 that tests whether we set the DB to be readonly when paranoid checks are enabled.
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52989
Summary:
There were just these two properties that didn't have any named
constant.
Test Plan:
build and below test
$ ./db_properties_test --gtest_filter=DBPropertiesTest.NumImmutableMemTable
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53103
Summary:
Moved all the tests that verify property correctness into a separate
file. The goal is to reduce compile time and complexity of db_test. I didn't
add parallelism for db_properties_test, even though these tests were
parallelized in db_test, since the file is small enough that it won't matter.
Some of these moves may be controversial since it's hard to say whether the
test is "verifying property correctness," or "using properties to verify
rocksdb's correctness." I'm interested in any opinions.
Test Plan: ran db_properties_test, also waiting on "make commit-prereq -j32"
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52995
Summary: It is reported that in compress benchmark in db_bench, zlib will cause an OOM. The suggestd fix was to clear the buffer.
Test Plan: Build and run compress benchmark.
Reviewers: IslamAbdelRahman, yhchiang, rven, andrewkr, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52857
Summary: That line used to dereference `column_family_data`, which is nullptr if we're creating a column family.
Test Plan: `make -j check`
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D52881
Makefile adjust paths for solaris build
Makefile enable _GLIBCXX_USE_C99 so that std::to_string is available
db_compaction_test.cc Initialise a variable to avoid a compilation error
db_impl.cc Include <alloca.h>
db_test.cc Include <alloca.h>
Environment.java recognise solaris envrionment
options_bulder.cc Make log unambiguous
geodb_impl.cc Make log and floor unambiguous
