Commit Graph

59 Commits

Author SHA1 Message Date
maoyouxiang
a35451eaa4 fix deadlock with enable_pipelined_write=true and max_successive_merges > 0
Summary:
fix this https://github.com/facebook/rocksdb/issues/3916
Closes https://github.com/facebook/rocksdb/pull/3923

Differential Revision: D8215192

Pulled By: yiwu-arbug

fbshipit-source-id: a4c2f839a91d92dc70906d2b7c6de0fe014a2422
2018-05-31 11:13:14 -07:00
Andrew Kryczka
7db721b9a6 Avoid sleep in DBTest.GroupCommitTest to fix flakiness
Summary:
DBTest.GroupCommitTest would often fail when run under valgrind because its sleeps were insufficient to guarantee a group commit had multiple entries. Instead we can use sync point to force a leader to wait until a non-leader thread has enqueued its work, thus guaranteeing a leader can do group commit work for multiple threads.
Closes https://github.com/facebook/rocksdb/pull/3883

Differential Revision: D8079429

Pulled By: ajkr

fbshipit-source-id: 61dc50fad29d2c85547842f681288de60fa29049
2018-05-22 12:16:25 -07:00
Siying Dong
d59549298f Skip deleted WALs during recovery
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.

Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)

This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765

Differential Revision: D7747618

Pulled By: siying

fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 15:43:09 -07:00
Mike Kolupaev
affe01b0d5 Improve write time breakdown stats
Summary:
There's a group of stats in PerfContext for profiling the write path. They break down the write time into WAL write, memtable insert, throttling, and everything else. We use these stats a lot for figuring out the cause of slow writes.

These stats got a bit out of date and are now categorizing some interesting things as "everything else", and also do some double counting. This PR fixes it and adds two new stats: time spent waiting for other threads of the batch group, and time spent waiting for scheduling flushes/compactions. Probably these will be enough to explain all the occasional abnormally slow (multiple seconds) writes that we're seeing.
Closes https://github.com/facebook/rocksdb/pull/3602

Differential Revision: D7251562

Pulled By: al13n321

fbshipit-source-id: 0a2d0f5a4fa5677455e1f566da931cb46efe2a0d
2018-04-23 17:58:54 -07:00
Maysam Yabandeh
89d989ed75 WritePrepared Txn: fix a bug in publishing recoverable state seq
Summary:
When using two_write_queue, the published seq and the last allocated sequence could be ahead of the LastSequence, even if both write queues are stopped as in WriteRecoverableState. The patch fixes a bug in WriteRecoverableState in which LastSequence was used as a reference but the result was applied to last fetched sequence and last published seq.
Closes https://github.com/facebook/rocksdb/pull/3665

Differential Revision: D7446099

Pulled By: maysamyabandeh

fbshipit-source-id: 1449bed9aed8e9db6af85946efd347cb8efd3c0b
2018-03-29 14:46:41 -07:00
Maysam Yabandeh
0377ff9dea WritePrepared Txn: make recoverable state visible after flush
Summary:
Currently if the CommitTimeWriteBatch is set to be used only as a state that is required only for recovery , the user cannot see that in DB until it is restarted. This while the state is already inserted into the DB after the memtable flush. It would be useful for debugging if make this state visible to the user after the flush by committing it. The patch does it by a invoking a callback that does the commit on the recoverable state.
Closes https://github.com/facebook/rocksdb/pull/3661

Differential Revision: D7424577

Pulled By: maysamyabandeh

fbshipit-source-id: 137f9408662f0853938b33fa440f27f04c1bbf5c
2018-03-28 12:12:08 -07:00
Maysam Yabandeh
35a4469bbf Fix race condition via concurrent FlushWAL
Summary:
Currently log_writer->AddRecord in WriteImpl is protected from concurrent calls via FlushWAL only if two_write_queues_ option is set. The patch fixes the problem by i) skip log_writer->AddRecord in FlushWAL if manual_wal_flush is not set, ii) protects log_writer->AddRecord in WriteImpl via log_write_mutex_ if manual_wal_flush_ is set but two_write_queues_ is not.

Fixes #3599
Closes https://github.com/facebook/rocksdb/pull/3656

Differential Revision: D7405608

Pulled By: maysamyabandeh

fbshipit-source-id: d6cc265051c77ae49c7c6df4f427350baaf46934
2018-03-26 16:29:56 -07:00
Maysam Yabandeh
3e417a6607 WritePrepared Txn: AddPrepared for all sub-batches
Summary:
Currently AddPrepared is performed only on the first sub-batch if there are duplicate keys in the write batch. This could cause a problem if the transaction takes too long to commit and the seq number of the first sub-patch moved to old_prepared_ but not the seq of the later ones. The patch fixes this by calling AddPrepared for all sub-patches.
Closes https://github.com/facebook/rocksdb/pull/3651

Differential Revision: D7388635

Pulled By: maysamyabandeh

fbshipit-source-id: 0ccd80c150d9bc42fe955e49ddb9d7ca353067b4
2018-03-23 17:30:04 -07:00
Zhongyi Xie
1cbc96d236 FlushReason improvement
Summary:
Right now flush reason "SuperVersion Change" covers a few different scenarios which is a bit vague. For example, the following db_bench job should trigger "Write Buffer Full"

> $ TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304
$ grep 'flush_reason' /dev/shm/dbbench/LOG
...
2018/03/06-17:30:42.543638 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242543634, "job": 192, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018024, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.569541 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242569536, "job": 193, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.596396 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242596392, "job": 194, "event": "flush_started", "num_memtables": 1, "num_entries": 7008, "num_deletes": 0, "memory_usage": 1018048, "flush_reason": "SuperVersion Change"}
2018/03/06-17:30:42.622444 7f2773b99700 EVENT_LOG_v1 {"time_micros": 1520386242622440, "job": 195, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "SuperVersion Change"}

With the fix:
> 2018/03/19-14:40:02.341451 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602341444, "job": 98, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018008, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.379655 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602379642, "job": 100, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018016, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.418479 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602418474, "job": 101, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.455084 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602455079, "job": 102, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018048, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.492293 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602492288, "job": 104, "event": "flush_started", "num_memtables": 1, "num_entries": 7007, "num_deletes": 0, "memory_usage": 1018056, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.528720 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602528715, "job": 105, "event": "flush_started", "num_memtables": 1, "num_entries": 7006, "num_deletes": 0, "memory_usage": 1018104, "flush_reason": "Write Buffer Full"}
2018/03/19-14:40:02.566255 7f11dc257700 EVENT_LOG_v1 {"time_micros": 1521495602566238, "job": 107, "event": "flush_started", "num_memtables": 1, "num_entries": 7009, "num_deletes": 0, "memory_usage": 1018112, "flush_reason": "Write Buffer Full"}
Closes https://github.com/facebook/rocksdb/pull/3627

Differential Revision: D7328772

Pulled By: miasantreble

fbshipit-source-id: 67c94065fbdd36930f09930aad0aaa6d2c152bb8
2018-03-22 18:42:18 -07:00
Andrew Kryczka
4d51feab0b Rename function for handling WAL write error
Summary:
It was misnamed. It actually updates `bg_error_` if `PreprocessWrite()` or `WriteToWAL()` fail, not related to the user callback.
Closes https://github.com/facebook/rocksdb/pull/3485

Differential Revision: D6955787

Pulled By: ajkr

fbshipit-source-id: bd7afc3fdb7a52830c021cbfc25fcbc3ab7d5e10
2018-03-22 15:58:39 -07:00
Maysam Yabandeh
7429b20e39 WritePrepared Txn: fix race condition on publishing seq
Summary:
This commit fixes a race condition on calling SetLastPublishedSequence. The function must be called only from the 2nd write queue when two_write_queues is enabled. However there was a bug that would also call it from the main write queue if CommitTimeWriteBatch is provided to the commit request and yet use_only_the_last_commit_time_batch_for_recovery optimization is not enabled. To fix that we penalize the commit request in such cases by doing an additional write solely to publish the seq number from the 2nd queue.
Closes https://github.com/facebook/rocksdb/pull/3641

Differential Revision: D7361508

Pulled By: maysamyabandeh

fbshipit-source-id: bf8f7a27e5cccf5425dccbce25eb0032e8e5a4d7
2018-03-22 14:43:36 -07:00
Fosco Marotto
d518fe1da6 uint64_t and size_t changes to compile for iOS
Summary:
In attempting to build a static lib for use in iOS, I ran in to lots of type errors between uint64_t and size_t.  This PR contains the changes I made to get `TARGET_OS=IOS make static_lib` to succeed while also getting Xcode to build successfully with the resulting `librocksdb.a` library imported.

This also compiles for me on macOS and tests fine, but I'm really not sure if I made the correct decisions about where to `static_cast` and where to change types.

Also up for discussion: is iOS worth supporting?  Getting the static lib is just part one, we aren't providing any bridging headers or wrappers like the ObjectiveRocks project, it won't be a great experience.
Closes https://github.com/facebook/rocksdb/pull/3503

Differential Revision: D7106457

Pulled By: gfosco

fbshipit-source-id: 82ac2073de7e1f09b91f6b4faea91d18bd311f8e
2018-03-06 12:43:51 -08:00
Andrew Kryczka
5d68243e61 Comment out unused variables
Summary:
Submitting on behalf of another employee.
Closes https://github.com/facebook/rocksdb/pull/3557

Differential Revision: D7146025

Pulled By: ajkr

fbshipit-source-id: 495ca5db5beec3789e671e26f78170957704e77e
2018-03-05 13:13:41 -08:00
Igor Sugak
aba3409740 Back out "[codemod] - comment out unused parameters"
Reviewed By: igorsugak

fbshipit-source-id: 4a93675cc1931089ddd574cacdb15d228b1e5f37
2018-02-22 12:43:17 -08:00
David Lai
f4a030ce81 - comment out unused parameters
Reviewed By: everiq, igorsugak

Differential Revision: D7046710

fbshipit-source-id: 8e10b1f1e2aecebbfb229c742e214db887e5a461
2018-02-22 09:44:23 -08:00
Siying Dong
ef29d2a234 Explictly fail writes if key or value is not smaller than 4GB
Summary:
Right now, users will encounter unexpected bahavior if they use key or value larger than 4GB. We should explicitly fail the queriers.
Closes https://github.com/facebook/rocksdb/pull/3484

Differential Revision: D6953895

Pulled By: siying

fbshipit-source-id: b60491e1af064fc5d52971956661f6c18ceac24f
2018-02-09 14:57:54 -08:00
Zhongyi Xie
945f618ba5 log flush reason for better debugging experience
Summary:
It's always a mystery from the logs why flush was triggered -- user triggered it manually, WriteBufferManager triggered it,  logs were full, write buffer was full, etc.
This PR logs Flush reason whenever a flush is scheduled.
Closes https://github.com/facebook/rocksdb/pull/3401

Differential Revision: D6788142

Pulled By: miasantreble

fbshipit-source-id: a867e54d493c06adf5172bd36a180fb3faae3511
2018-02-09 12:12:43 -08:00
Maysam Yabandeh
88d8b2a2f5 WritePrepared Txn: Duplicate Keys, Txn Part
Summary:
This patch takes advantage of memtable being able to detect duplicate <key,seq> and returning TryAgain to handle duplicate keys in WritePrepared Txns. Through WriteBatchWithIndex's index it detects existence of at least a duplicate key in the write batch. If duplicate key was reported, it then pays the cost of counting the number of sub-patches by iterating over the write batch and pass it to DBImpl::Write. DB will make use of the provided batch_count to assign proper sequence numbers before sending them to the WAL. When later inserting the batch to the memtable, it increases the seq each time memtbale reports a duplicate (a sub-patch in our counting) and tries again.
Closes https://github.com/facebook/rocksdb/pull/3455

Differential Revision: D6873699

Pulled By: maysamyabandeh

fbshipit-source-id: db8487526c3a5dc1ddda0ea49f0f979b26ae648d
2018-02-05 18:43:24 -08:00
Anand Ananthabhotla
4b124fb9d3 Handle error return from WriteBuffer()
Summary:
There are a couple of places where we swallow any error from
WriteBuffer() - in SwitchMemtable() and DBImpl::CloseImpl(). Propagate
the error up in those cases rather than ignoring it.
Closes https://github.com/facebook/rocksdb/pull/3404

Differential Revision: D6879954

Pulled By: anand1976

fbshipit-source-id: 2ef88b554be5286b0a8bad7384ba17a105395bdb
2018-02-05 13:59:34 -08:00
Andrew Kryczka
0f0d2ab95a fix DBImpl instance variable naming
Summary:
got confused while reading `FindObsoleteFiles` due to thinking it's a local variable, so renamed it properly
Closes https://github.com/facebook/rocksdb/pull/3342

Differential Revision: D6684797

Pulled By: ajkr

fbshipit-source-id: a4df0aae1cccce99d4dd4d164aadc85b17707132
2018-01-09 12:56:58 -08:00
Maysam Yabandeh
0ef3fdd732 Disable need_log_sync on bg err
Summary:
When there is a background error PreprocessWrite returns without marking the logs synced. If we keep need_log_sync to true, it would try to sync them at the end, which would break the logic. The patch would unset need_log_sync if the logs end up not being marked for sync in PreprocessWrite.
Closes https://github.com/facebook/rocksdb/pull/3293

Differential Revision: D6602347

Pulled By: maysamyabandeh

fbshipit-source-id: 37ee04209e8dcfd78de891654ce50d0954abeb38
2017-12-20 08:12:24 -08:00
Maysam Yabandeh
546a63272f disableWAL with WriteImplWALOnly
Summary:
Currently WriteImplWALOnly simply returns when disableWAL is set. This is an incorrect behavior since it does not allocated the sequence number, which is a side-effect of writing to the WAL. This patch fixes the issue.
Closes https://github.com/facebook/rocksdb/pull/3262

Differential Revision: D6550974

Pulled By: maysamyabandeh

fbshipit-source-id: 745a83ae8f04e7ca6c8ffb247d6ef16c287c52e7
2017-12-13 07:57:44 -08:00
Maysam Yabandeh
18dcf7f98d WritePrepared Txn: PreReleaseCallback
Summary:
Add PreReleaseCallback to be called at the end of WriteImpl but before publishing the sequence number. The callback is used in WritePrepareTxn to i) update the commit map, ii) update the last published sequence number in the 2nd write queue. It also ensures that all the commits will go to the 2nd queue.
These changes will ensure that the commit map is updated before the sequence number is published and used by reading snapshots. If we use two write queues, the snapshots will use the seq number published by the 2nd queue. If we use one write queue (the default, the snapshots will use the last seq number in the memtable, which also indicates the last published seq number.
Closes https://github.com/facebook/rocksdb/pull/3205

Differential Revision: D6438959

Pulled By: maysamyabandeh

fbshipit-source-id: f8b6c434e94bc5f5ab9cb696879d4c23e2577ab9
2017-11-30 23:50:45 -08:00
Yi Wu
3cf562be31 Fix IOError on WAL write doesn't propagate to write group follower
Summary:
This is a simpler version of #3097 by removing all unrelated changes.

Fixing the bug where concurrent writes may get Status::OK while it actually gets IOError on WAL write. This happens when multiple writes form a write batch group, and the leader get an IOError while writing to WAL. The leader failed to pass the error to followers in the group, and the followers end up returning Status::OK() while actually writing nothing. The bug only affect writes in a batch group. Future writes after the batch group will correctly return immediately with the IOError.
Closes https://github.com/facebook/rocksdb/pull/3201

Differential Revision: D6421644

Pulled By: yiwu-arbug

fbshipit-source-id: 1c2a455c5b73f6842423785eb8a9dbfbb191dc0e
2017-11-28 11:42:48 -08:00
Maysam Yabandeh
54b43563be WritePrepared Txn: Refactoring WriteCallback
Summary:
Refactor the logic around WriteCallback in the write path to clarify when and how exactly we advance the sequence number and making sure it is consistent across the code.
Closes https://github.com/facebook/rocksdb/pull/3168

Differential Revision: D6324312

Pulled By: maysamyabandeh

fbshipit-source-id: 9a34f479561fdb2a5d01ef6d37a28908d03bbe33
2017-11-15 08:27:06 -08:00
Maysam Yabandeh
857adf388f WritePrepared Txn: Refactor conf params
Summary:
Summary of changes:
- Move seq_per_batch out of Options
- Rename concurrent_prepare to two_write_queues
- Add allocate_seq_only_for_data_
Closes https://github.com/facebook/rocksdb/pull/3136

Differential Revision: D6304458

Pulled By: maysamyabandeh

fbshipit-source-id: 08e685bfa82bbc41b5b1c5eb7040a8ca6e05e58c
2017-11-10 17:28:12 -08:00
Shaohua Li
eefd75a228 Stream
Summary:
Add a simple policy for NVMe write time life hint
Closes https://github.com/facebook/rocksdb/pull/3095

Differential Revision: D6298030

Pulled By: shligit

fbshipit-source-id: 9a72a42e32e92193af11599eb71f0cf77448e24d
2017-11-10 09:26:24 -08:00
Maysam Yabandeh
17731a43a6 WritePrepared Txn: Optimize for recoverable state
Summary:
GetCommitTimeWriteBatch is currently used to store some state as part of commit in 2PC. In MyRocks it is specifically used to store some data that would be needed only during recovery. So it is not need to be stored in memtable right after each commit.
This patch enables an optimization to write the GetCommitTimeWriteBatch only to the WAL. The batch will be written to memtable during recovery when the WAL is replayed. To cover the case when WAL is deleted after memtable flush, the batch is also buffered and written to memtable right before each memtable flush.
Closes https://github.com/facebook/rocksdb/pull/3071

Differential Revision: D6148023

Pulled By: maysamyabandeh

fbshipit-source-id: 2d09bae5565abe2017c0327421010d5c0d55eaa7
2017-11-01 17:26:46 -07:00
Yi Wu
792ef10ca8 Return Status::InvalidArgument if user request sync write while disabling WAL
Summary:
write_options.sync = true and write_options.disableWAL is incompatible. When WAL is disabled, we are not able to persist the write immediately. Return an error in this case to avoid misuse of the options.
Closes https://github.com/facebook/rocksdb/pull/3086

Differential Revision: D6176822

Pulled By: yiwu-arbug

fbshipit-source-id: 1eb10028c14fe7d7c13c8bc12c0ef659f75aa071
2017-10-28 22:11:18 -07:00
Maysam Yabandeh
ec6c5383d0 WritePrepared Txn: end-to-end tests
Summary:
Enable WritePrepared policy for existing transaction tests.
Closes https://github.com/facebook/rocksdb/pull/2972

Differential Revision: D5993614

Pulled By: maysamyabandeh

fbshipit-source-id: d1eb53e2920c4e2a56434bb001231c98426f3509
2017-10-06 14:26:45 -07:00
Adrien Schildknecht
01542400a8 Inform caller when rocksdb is stalling writes
Summary:
Add a new function in Listener to let the caller know when rocksdb
is stalling writes.
Closes https://github.com/facebook/rocksdb/pull/2897

Differential Revision: D5860124

Pulled By: schischi

fbshipit-source-id: ee791606169aa64f772c86f817cebf02624e05e1
2017-10-05 18:11:43 -07:00
Maysam Yabandeh
385049baf2 WritePrepared Txn: Recovery
Summary:
Recover txns from the WAL. Also added some unit tests.
Closes https://github.com/facebook/rocksdb/pull/2901

Differential Revision: D5859596

Pulled By: maysamyabandeh

fbshipit-source-id: 6424967b231388093b4effffe0a3b1b7ec8caeb0
2017-09-28 16:56:45 -07:00
Quinn Jarrell
6a541afcc4 Make bytes_per_sync and wal_bytes_per_sync mutable
Summary:
SUMMARY
Moves the bytes_per_sync and wal_bytes_per_sync options from immutableoptions to mutable options. Also if wal_bytes_per_sync is changed, the wal file and memtables are flushed.
TEST PLAN
ran make check
all passed

Two new tests SetBytesPerSync, SetWalBytesPerSync check that after issuing setoptions with a new value for the var, the db options have the new value.
Closes https://github.com/facebook/rocksdb/pull/2893

Reviewed By: yiwu-arbug

Differential Revision: D5845814

Pulled By: TheRushingWookie

fbshipit-source-id: 93b52d779ce623691b546679dcd984a06d2ad1bd
2017-09-27 17:49:45 -07:00
Maysam Yabandeh
60beefd6e0 WritePrepared Txn: Advance seq one per batch
Summary:
By default the seq number in DB is increased once per written key. WritePrepared txns requires the seq to be increased once per the entire batch so that the seq would be used as the prepare timestamp by which the transaction is identified. Also we need to increase seq for the commit marker since it would give a unique id to the commit timestamp of transactions.

Two unit tests are added to verify our understanding of how the seq should be increased. The recovery path requires much more work and is left to another patch.
Closes https://github.com/facebook/rocksdb/pull/2885

Differential Revision: D5837843

Pulled By: maysamyabandeh

fbshipit-source-id: a08960b93d727e1cf438c254d0c2636fb133cc1c
2017-09-18 14:45:08 -07:00
Huachao Huang
2a5915049e Fix missing BYTES_PER_WRITE for pipeline write
Summary: Closes https://github.com/facebook/rocksdb/pull/2862

Differential Revision: D5805638

Pulled By: yiwu-arbug

fbshipit-source-id: 72d38c74395690023a719f400daff01527645a17
2017-09-11 11:41:27 -07:00
follitude
ac8fb77afd fix some misspellings
Summary:
PTAL ajkr
Closes https://github.com/facebook/rocksdb/pull/2750

Differential Revision: D5648052

Pulled By: ajkr

fbshipit-source-id: 7cd1ddd61364d5a55a10fdd293fa74b2bf89dd98
2017-08-16 21:57:20 -07:00
Maysam Yabandeh
eb6425303e Update WritePrepared with the pseudo code
Summary:
Implement the main body of WritePrepared pseudo code. This includes PrepareInternal and CommitInternal, as well as AddCommitted which updates the commit map. It also provides a IsInSnapshot method that could be later called form the read path to decide if a version is in the read snapshot or it should other be skipped.

This patch lacks unit tests and does not attempt to offer an efficient implementation. The idea is that to have the API specified so that we can work on related tasks in parallel.
Closes https://github.com/facebook/rocksdb/pull/2713

Differential Revision: D5640021

Pulled By: maysamyabandeh

fbshipit-source-id: bfa7a05e8d8498811fab714ce4b9c21530514e1c
2017-08-16 16:57:47 -07:00
Maysam Yabandeh
30b58cf71a Remove the orphan assert on !need_log_sync
Summary:
We initially had disabled support for write_options.sync when concurrent_prepare_ is set. We later added this support but the statement that asserts this combination is not used was left there. This patch cleans it up.
Closes https://github.com/facebook/rocksdb/pull/2642

Differential Revision: D5496101

Pulled By: maysamyabandeh

fbshipit-source-id: becbc503446f2a51bee24cc861958c090c724ec2
2017-07-25 18:41:52 -07:00
Sagar Vemuri
72502cf227 Revert "comment out unused parameters"
Summary:
This reverts the previous commit 1d7048c598, which broke the build.

Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627

Differential Revision: D5476473

Pulled By: sagar0

fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
2017-07-21 18:26:26 -07:00
Victor Gao
1d7048c598 comment out unused parameters
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.

Reviewed By: igorsugak

Differential Revision: D5454343

fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
2017-07-21 14:57:44 -07:00
Siying Dong
3c327ac2d0 Change RocksDB License
Summary: Closes https://github.com/facebook/rocksdb/pull/2589

Differential Revision: D5431502

Pulled By: siying

fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75
2017-07-15 16:11:23 -07:00
Maysam Yabandeh
1e34d07e18 Simplify and document sync rules for logs_ etc
Summary:
Adding/Correcting inline comments and clarify the sync rules. To make it simple to reason, the rules are a big general which ended up to some extra synchronizations. However such synchronizations are not on the fast path, and they are worth the simplicity.
Closes https://github.com/facebook/rocksdb/pull/2517

Differential Revision: D5348239

Pulled By: maysamyabandeh

fbshipit-source-id: ff2e59fb1e568c122d2cdbf598310f3613b7d212
2017-06-30 09:42:28 -07:00
Maysam Yabandeh
e9f91a5176 Add a fetch_add variation to AddDBStats
Summary:
AddDBStats is in two steps of load and store, which is more efficient than fetch_add. This is however not thread-safe. Currently we have to protect concurrent access to AddDBStats with a mutex which is less efficient that fetch_add.

This patch adds the option to do fetch_add when AddDBStats. The results for my 2pc benchmark on sysbench is:
- vanilla: 68618 tps
- removing mutex on AddDBStats (unsafe): 69767 tps
- fetch_add for all AddDBStats: 69200 tps
- fetch_add only for concurrently access AddDBStats (this patch): 69579 tps
Closes https://github.com/facebook/rocksdb/pull/2505

Differential Revision: D5330656

Pulled By: maysamyabandeh

fbshipit-source-id: af64d7bee135b0e86b4fac323a4f9d9113eaa383
2017-06-29 17:12:19 -07:00
Siying Dong
18c63af6ef Make "make analyze" happy
Summary:
"make analyze" is reporting some errors. It's complicated to look but it seems to me that they are all false positive. Anyway, I think cleaning them up is a good idea. Some of the changes are hacky but I don't know a better way.
Closes https://github.com/facebook/rocksdb/pull/2508

Differential Revision: D5341710

Pulled By: siying

fbshipit-source-id: 6070e430e0e41a080ef441e05e8ec827d45efab6
2017-06-28 15:42:27 -07:00
Maysam Yabandeh
01534db24c Fix the reported asan issues
Summary:
This is to resolve the asan complains. In the meanwhile I am working on clarifying/revisiting the sync rules.
Closes https://github.com/facebook/rocksdb/pull/2510

Differential Revision: D5338660

Pulled By: yiwu-arbug

fbshipit-source-id: ce6f6e0826d43a2c0bfa4328a00c78f73cd6498a
2017-06-28 13:13:22 -07:00
Maysam Yabandeh
8e6345d2df Update rename of ParanoidCheck
Summary: Closes https://github.com/facebook/rocksdb/pull/2494

Differential Revision: D5317902

Pulled By: maysamyabandeh

fbshipit-source-id: 097330292180816b3d0c9f4cbbdb6f68f0180200
2017-06-24 18:12:03 -07:00
Maysam Yabandeh
499ebb3ab5 Optimize for serial commits in 2PC
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)

The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.

Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.

Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345

Differential Revision: D5210732

Pulled By: maysamyabandeh

fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
2017-06-24 14:11:29 -07:00
Andrew Kryczka
71f5bcb730 Introduce OnBackgroundError callback
Summary:
Some users want to prevent rocksdb from entering read-only mode in certain error cases. This diff gives them a callback, `OnBackgroundError`, that they can use to achieve it.

- call `OnBackgroundError` every time we consider setting `bg_error_`. Use its result to assign `bg_error_` but not to change the function's return status.
- classified calls using `BackgroundErrorReason` to give the callback some info about where the error happened
- renamed `ParanoidCheck` to something more specific so we can provide a clear `BackgroundErrorReason`
- unit tests for the most common cases: flush or compaction errors
Closes https://github.com/facebook/rocksdb/pull/2477

Differential Revision: D5300190

Pulled By: ajkr

fbshipit-source-id: a0ea4564249719b83428e3f4c6ca2c49e366e9b3
2017-06-22 19:41:50 -07:00
Andrew Kryczka
c217e0b9c7 Call RateLimiter for compaction reads
Summary:
Allow users to rate limit background work based on read bytes, written bytes, or sum of read and written bytes. Support these by changing the RateLimiter API, so no additional options were needed.
Closes https://github.com/facebook/rocksdb/pull/2433

Differential Revision: D5216946

Pulled By: ajkr

fbshipit-source-id: aec57a8357dbb4bfde2003261094d786d94f724e
2017-06-13 14:56:46 -07:00
Siying Dong
52a7f38b19 WriteOptions.low_pri which can throttle low pri writes if needed
Summary:
If ReadOptions.low_pri=true and compaction is behind, the write will either return immediate or be slowed down based on ReadOptions.no_slowdown.
Closes https://github.com/facebook/rocksdb/pull/2369

Differential Revision: D5127619

Pulled By: siying

fbshipit-source-id: d30e1cff515890af0eff32dfb869d2e4c9545eb0
2017-06-05 15:02:35 -07:00