Summary:
For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file.
However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage.
Related changes include:
- Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks
- Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary
- Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970
Test Plan:
- updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level
- looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set.
Reviewed By: pdillinger
Differential Revision: D26467994
Pulled By: ajkr
fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465
Summary:
This request is adding support for using DirectSlice in ReadOptions lower/upper bounds.
To be more efficient I have added setLength to DirectSlice so I can just update the length to be used by slice from direct buffer. It is also needed, because when one creates iterator it keep pointer to original slice so setting new slice in options does not help (it needs to reuse existing one). Using this approach one can modify the slice any time during operations with iterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7132
Reviewed By: zhichao-cao
Differential Revision: D25840092
Pulled By: jay-zhuang
fbshipit-source-id: 760167baf61568c9a35138145c4bf9b06824cb71
Summary:
Fix ColumnFamilyOptionsTest.cfPaths and OptionsTest.cfPaths in 6.15 branch (and probably other branches including master)
has_exception variable was not initialized which was causing test failures and incorrect behavior on s390 platform (and maybe others as variable content is undefined).
adamretter please take a look.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7853
Reviewed By: akankshamahajan15
Differential Revision: D25901639
Pulled By: jay-zhuang
fbshipit-source-id: 151b5db27b495fc6d8ed54c0eccbde2508215ac5
Summary:
Fixes Issue https://github.com/facebook/rocksdb/issues/7497
When allow_data_in_errors db_options is set, log error key details in `ParseInternalKey()`
Have fixed most of the calls. Have few TODOs still pending - because have to make more deeper changes to pass in the allow_data_in_errors flag. Will do those in a separate PR later.
Tests:
- make check
- some of the existing tests that exercise the "internal key too small" condition are: dbformat_test, cuckoo_table_builder_test
- some of the existing tests that exercise the corrupted key path are: corruption_test, merge_helper_test, compaction_iterator_test
Example of new status returns:
- Key too small - `Corrupted Key: Internal Key too small. Size=5`
- Corrupt key with allow_data_in_errors option set to false: `Corrupted Key: '<redacted>' seq:3, type:3`
- Corrupt key with allow_data_in_errors option set to true: `Corrupted Key: '61' seq:3, type:3`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7515
Reviewed By: ajkr
Differential Revision: D24240264
Pulled By: ramvadiv
fbshipit-source-id: bc48f5d4475ac19d7713e16df37505b31aac42e7
Summary:
Allows adding event listeners in RocksJava.
* Adds listeners getter and setter in `Options` and `DBOptions` classes.
* Adds `EventListener` Java interface and base class for implementing custom event listener callbacks - `AbstractEventListener`, which has an underlying native callback class implementing C++ `EventListener` class.
* `AbstractEventListener` class has mechanism for selectively enabling its callback methods in order to prevent invoking Java method if it is not implemented. This decreases performance cost in case only subset of event listener callback methods is needed - the JNI code for remaining "no-op" callbacks is not executed.
* The code is covered by unit tests in `EventListenerTest.java`, there are also tests added for setting/getting listeners field in `OptionsTest.java` and `DBOptionsTest.java`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7425
Reviewed By: pdillinger
Differential Revision: D24063390
Pulled By: jay-zhuang
fbshipit-source-id: 508c359538983d6b765e70d9989c351794a944ee
Summary:
Add following stats for MultiGet in Histogram to get more insight on MultiGet.
1. Number of index and filter blocks read from file as part of MultiGet
request per level.
2. Number of data blocks read from file per level.
3. Number of SST files loaded from file system per level.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7366
Reviewed By: anand1976
Differential Revision: D24127040
Pulled By: akankshamahajan15
fbshipit-source-id: e63a003056b833729b277edc0639c08fb432756b
Summary:
as title
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7347
Test Plan: unit tests included
Reviewed By: jay-zhuang
Differential Revision: D23592552
Pulled By: pdillinger
fbshipit-source-id: 1c3571b6f42bfd0cfd723ff49d01fbc02a1be45b
Summary:
Adds compaction statistics (total bytes read and written) for compactions that occur for delete-triggered, periodic, and TTL compaction reasons.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7165
Test Plan:
TTL and periodic can be checked by runnning db_bench with the options activated:
/db_bench --benchmarks="fillrandom,stats" --statistics --num=10000000 -base_background_compactions=16 -periodic_compaction_seconds=1
./db_bench --benchmarks="fillrandom,stats" --statistics --num=10000000 -base_background_compactions=16 -fifo_compaction_ttl=1
Setting the time to one second causes non-zero bytes read/written for those compaction reasons. Disabling them or setting them to times longer than the test run length causes the stats to return to zero as expected.
Delete-triggered compaction counting is tested in DBTablePropertiesTest.DeletionTriggeredCompactionMarking
Reviewed By: ajkr
Differential Revision: D22693050
Pulled By: akabcenell
fbshipit-source-id: d15cef4d94576f703015c8942d5f0d492f69401d
Summary:
SST Partitioner interface that allows to split SST files during compactions.
It basically instruct compaction to create a new file when needed. When one is using well defined prefixes and prefixed way of defining tables it is good to define also partitioning so that promotion of some SST file does not cover huge key space on next level (worst case complete space).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6957
Reviewed By: ajkr
Differential Revision: D22461239
fbshipit-source-id: 9ce07bba08b3ba89c2d45630520368f704d1316e
Summary:
The methods in convenience.h are used to compare/convert objects to/from strings. There is a mishmash of parameters in use here with more needed in the future. This PR replaces those parameters with a single structure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6389
Reviewed By: siying
Differential Revision: D21163707
Pulled By: zhichao-cao
fbshipit-source-id: f807b4cc7e2b0af3871536b69546b2604dfa81bd
Summary:
This PR exposes the `Iterator::Refresh` method to the Java API by adding it on the `RocksIteratorInterface` interface. There are three concrete implementations: `RocksIterator`, `SstFileReaderIterator`, and `WBWIRocksIterator`. For the first two cases, the JNI side simply delegates to the underlying `Iterator::Refresh` method; in the last case, as it doesn't share an ancestor, and per the discussion in https://github.com/facebook/rocksdb/issues/3465, a `Status::NotSupported` exception is thrown.
As the last PR had no activity in a while, I'm opening a new one - I'm completely fine with merging the previous PR if it gets completed before this is reviewed.
Let me know if there's anything missing or anything else I can do 👍
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6573
Reviewed By: cheng-chang
Differential Revision: D20604666
Pulled By: pdillinger
fbshipit-source-id: 4de17df1180c3b87b76cfdd77b674b81fc0563f7
Summary:
This change is fixing a crash happening in getApproximateSizes JNI implementation. It also reenables Java test that was crashing most likelly because if this bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6652
Reviewed By: cheng-chang
Differential Revision: D20874865
Pulled By: pdillinger
fbshipit-source-id: da95516f15e5df2efe1a4e5690a2ce172cb53f87
Summary:
Adding a Java API for rocksdb::CancelAllBackgroundWork() so that the user can call this (when required) before closing the DB. This is to **prevent the crashes when manual compaction is running and the user decides to close the DB**.
Calling CancelAllBackgroundWork() seems to be the recommended way to make sure that it's safe to close the DB (according to RocksDB FAQ: https://github.com/facebook/rocksdb/wiki/RocksDB-FAQ#basic-readwrite).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6657
Reviewed By: cheng-chang
Differential Revision: D20896395
Pulled By: pdillinger
fbshipit-source-id: 8a8208c10093db09bd35db9af362211897870d96
Summary:
In most places in the code the variable names are spelled correctly as
COMMITTED but in a couple places not. This fixes them and ensures the
variable is always called COMMITTED everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6481
Differential Revision: D20306776
Pulled By: pdillinger
fbshipit-source-id: b6c1bfe41db559b4bc6955c530934460c07f7022
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
It is very useful to support direct ByteBuffers in Java. It allows to have zero memory copy and some serializers are using that directly so one do not need to create byte[] array for it.
This change also contains some fixes for Windows JNI build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/2283
Differential Revision: D19834971
Pulled By: pdillinger
fbshipit-source-id: 44173aa02afc9836c5498c592fd1ea95b6086e8e
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.
If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.
We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353
Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.
Differential Revision: D19656425
Pulled By: al13n321
fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
Summary:
This is a redesign of the API for RocksJava comparators with the aim of improving performance. It also simplifies the class hierarchy.
**NOTE**: This breaks backwards compatibility for existing 3rd party Comparators implemented in Java... so we need to consider carefully which release branches this goes into.
Previously when implementing a comparator in Java the developer had a choice of subclassing either `DirectComparator` or `Comparator` which would use direct and non-direct byte-buffers resepectively (via `DirectSlice` and `Slice`).
In this redesign there we have eliminated the overhead of using the Java Slice classes, and just use `ByteBuffer`s. The `ComparatorOptions` supplied when constructing a Comparator allow you to choose between direct and non-direct byte buffers by setting `useDirect`.
In addition, the `ComparatorOptions` now allow you to choose whether a ByteBuffer is reused over multiple comparator calls, by setting `maxReusedBufferSize > 0`. When buffers are reused, ComparatorOptions provides a choice of mutex type by setting `useAdaptiveMutex`.
---
[JMH benchmarks previously indicated](https://github.com/facebook/rocksdb/pull/6241#issue-356398306) that the difference between C++ and Java for implementing a comparator was ~7x slowdown in Java.
With these changes, when reusing buffers and guarding access to them via mutexes the slowdown is approximately the same. However, these changes offer a new facility to not reuse mutextes, which reduces the slowdown to ~5.5x in Java. We also offer a `thread_local` mechanism for reusing buffers, which reduces slowdown to ~5.2x in Java (closes https://github.com/facebook/rocksdb/pull/4425).
These changes also form a good base for further optimisation work such as further JNI lookup caching, and JNI critical.
---
These numbers were captured without jemalloc. With jemalloc, the performance improves for all tests, and the Java slowdown reduces to between 4.8x and 5.x.
```
ComparatorBenchmarks.put native_bytewise thrpt 25 124483.795 ± 2032.443 ops/s
ComparatorBenchmarks.put native_reverse_bytewise thrpt 25 114414.536 ± 3486.156 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_adaptive-mutex thrpt 25 17228.250 ± 1288.546 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_non-adaptive-mutex thrpt 25 16035.865 ± 1248.099 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_reused-64_thread-local thrpt 25 21571.500 ± 871.521 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_adaptive-mutex thrpt 25 23613.773 ± 8465.660 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_non-adaptive-mutex thrpt 25 16768.172 ± 5618.489 ops/s
ComparatorBenchmarks.put java_bytewise_direct_reused-64_thread-local thrpt 25 23921.164 ± 8734.742 ops/s
ComparatorBenchmarks.put java_bytewise_non-direct_no-reuse thrpt 25 17899.684 ± 839.679 ops/s
ComparatorBenchmarks.put java_bytewise_direct_no-reuse thrpt 25 22148.316 ± 1215.527 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_adaptive-mutex thrpt 25 11311.126 ± 820.602 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_non-adaptive-mutex thrpt 25 11421.311 ± 807.210 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_reused-64_thread-local thrpt 25 11554.005 ± 960.556 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_adaptive-mutex thrpt 25 22960.523 ± 1673.421 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_non-adaptive-mutex thrpt 25 18293.317 ± 1434.601 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_reused-64_thread-local thrpt 25 24479.361 ± 2157.306 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_non-direct_no-reuse thrpt 25 7942.286 ± 626.170 ops/s
ComparatorBenchmarks.put java_reverse_bytewise_direct_no-reuse thrpt 25 11781.955 ± 1019.843 ops/s
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6252
Differential Revision: D19331064
Pulled By: pdillinger
fbshipit-source-id: 1f3b794e6a14162b2c3ffb943e8c0e64a0c03738
Summary:
There's no technological impediment to allowing the Bloom
filter bits/key to be non-integer (fractional/decimal) values, and it
provides finer control over the memory vs. accuracy trade-off. This is
especially handy in using the format_version=5 Bloom filter in place
of the old one, because bits_per_key=9.55 provides the same accuracy as
the old bits_per_key=10.
This change not only requires refining the logic for choosing the best
num_probes for a given bits/key setting, it revealed a flaw in that logic.
As bits/key gets higher, the best num_probes for a cache-local Bloom
filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a
standard Bloom filter. For example, at 16 bits per key, the best
num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%).
This change fixes and refines that logic (for the format_version=5
Bloom filter only, just in case) based on empirical tests to find
accuracy inflection points between each num_probes.
Although bits_per_key is now specified as a double, the new Bloom
filter converts/rounds this to "millibits / key" for predictable/precise
internal computations. Just in case of unforeseen compatibility
issues, we round to the nearest whole number bits / key for the
legacy Bloom filter, so as not to unlock new behaviors for it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092
Test Plan: unit tests included
Differential Revision: D18711313
Pulled By: pdillinger
fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
Summary:
Add unordered_write option api and related ut to rocksjava
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5839
Differential Revision: D17604446
Pulled By: maysamyabandeh
fbshipit-source-id: c6b07e85ca9d5e3a92973ddb6ab2bc079e53c9c1
Summary:
The comparison of va_list and nullptr is always False under any arch, and will raise invalid operands of types error in aarch64 env (`error: invalid operands of types ‘va_list {aka __va_list}’ and ‘std::nullptr_t’ to binary ‘operator!=’`).
This patch removes this invalid assert.
Closes: https://github.com/facebook/rocksdb/issues/4277
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5836
Differential Revision: D17532470
fbshipit-source-id: ca98078ecbc6a9416c69de3bd6ffcfa33a0f0185
Summary:
Some recent commits might not have passed through the formatter. I formatted recent 45 commits. The script hangs for more commits so I stopped there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5827
Test Plan: Run all existing tests.
Differential Revision: D17483727
fbshipit-source-id: af23113ee63015d8a43d89a3bc2c1056189afe8f
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
if read_options.snapshot is not set, ::Get will take the last sequence number after taking a super-version and uses that as the sequence number. Theoretically max_eviceted_seq_ could advance this sequence number. This could lead ::IsInSnapshot that will be invoked by the ReadCallback to notice the absence of the snapshot. In this case, the ReadCallback should have passed a non-value to snap_released so that it could be set by the ::IsInSnapshot. The patch does that, and adds a unit test to verify it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5664
Differential Revision: D16614033
Pulled By: maysamyabandeh
fbshipit-source-id: 06fb3fd4aacd75806ed1a1acec7961f5d02486f2
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
As [BlockBasedTableConfig setBlockCacheSize()](1966a7c055/java/src/main/java/org/rocksdb/BlockBasedTableConfig.java (L728)) said, If cacheSize is non-positive, then cache will not be used. but when we configure a negative number or 0, there is an unexpected result: the block cache becomes 8M.
- Allow 0 as a valid size. When block cache size is 0, an 8MB block cache is created, as it is the default C++ API behavior. Also updated the comment.
- Set no_block_cache true if negative value is passed to block cache size, and no block cache will be created.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5465
Differential Revision: D15968788
Pulled By: sagar0
fbshipit-source-id: ee02d6e95841c9e2c316a64bfdf192d46ff5638a
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
Depending on the config, manual compaction (leveled compaction style) does following compactions:
L0->L1
L1->L2
...
Ln-1 -> Ln
Ln -> Ln
The final Ln -> Ln compaction is partly unnecessary as it recompacts all the files that were just generated by the Ln-1 -> Ln. We should avoid recompacting such files. This rule should be applied to Lmax only.
Resolves issue https://github.com/facebook/rocksdb/issues/4995
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5138
Differential Revision: D14940106
Pulled By: miasantreble
fbshipit-source-id: 8d3cf5507a17e76f3333cfd4bac5256d005636e5
Summary:
This reverts commit ee1818081f.
We are not ready to deprecate this feature. revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5034
Differential Revision: D14287246
Pulled By: siying
fbshipit-source-id: e4beafdeaee1c94364fdaa6ba198218d158339f7
Summary:
Right now, users can change statistics.stats_level while DB is running, but TSAN may report
data race. We make stats_level_ to be atomic, and access them using accessors.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5030
Differential Revision: D14267519
Pulled By: siying
fbshipit-source-id: 37d7ebeff7a43a406230143422a16af899163f73
Summary:
This is my latest round of changes to add missing items to RocksJava. More to come in future PRs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4833
Differential Revision: D14152266
Pulled By: sagar0
fbshipit-source-id: d6cff67e26da06c131491b5cf6911a8cd0db0775
Summary:
This PR adds public `GetStatsHistory` API to retrieve stats history in the form of an std map. The key of the map is the timestamp in microseconds when the stats snapshot is taken, the value is another std map from stats name to stats value (stored in std string). Two DBOptions are introduced: `stats_persist_period_sec` (default 10 minutes) controls the intervals between two snapshots are taken; `max_stats_history_count` (default 10) controls the max number of history snapshots to keep in memory. RocksDB will stop collecting stats snapshots if `stats_persist_period_sec` is set to 0.
(This PR is the in-memory part of https://github.com/facebook/rocksdb/pull/4535)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4748
Differential Revision: D13961471
Pulled By: miasantreble
fbshipit-source-id: ac836d401ecb84ea92216bf9966f969dedf4ad04
Summary:
We introduced ttl option in CompactionOptionsFIFO when ttl-based file
deletion (compaction) was supported only as part of FIFO Compaction. But
with the extension of ttl semantics even to Level compaction,
CompactionOptionsFIFO.ttl can now be deprecated. Instead we will start
using ColumnFamilyOptions.ttl for FIFO compaction as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4965
Differential Revision: D14072960
Pulled By: sagar0
fbshipit-source-id: c98cc2ae695a28136295787cd88d36a220fc219e
Summary:
Store_index_in_file is a less useful feature. To simplify the code to maintain, we are dropping the feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4914
Differential Revision: D13791883
Pulled By: siying
fbshipit-source-id: d187c5d662584866103e4b77d09dfb925509ae2e
Summary:
Expose common stats min,max,count,sum via statistics JNI. These stats are not fully exposed on the Java side as is, but are available on the native side.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4742
Differential Revision: D13403766
Pulled By: ajkr
fbshipit-source-id: 5b70f7bd3fb7490aab73dcbd09f13490fce5c773
Summary:
Updating the `HistogramType.java` and `TickerType.java` to expose and correct metrics for statistics callbacks.
Moved `NO_ITERATOR_CREATED` to the proper stat name and deprecated `NO_ITERATORS`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4733
Differential Revision: D13466936
Pulled By: sagar0
fbshipit-source-id: a58d1edcc07c7b68c3525b1aa05828212c89c6c7
Summary:
When adding CompactionFilter and CompactionFilterFactory settings to the Java layer, ColumnFamilyOptions was modified directly instead of ColumnFamilyOptionsInterface. This meant that the old-stye Options monolith was left behind.
This patch fixes that, by:
- promoting the CompactionFilter + CompactionFilterFactory setters from ColumnFamilyOptions -> ColumnFamilyOptionsInterface
- adding getters in ColumnFamilyOptionsInterface
- implementing setters in Options
- implementing getters in both ColumnFamilyOptions and Options
- adding testcases
- reusing a test CompactionFilterFactory by moving it to a common location
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3461
Differential Revision: D13278788
Pulled By: sagar0
fbshipit-source-id: 72602c6eb97dc80734e718abb5e2e9958d3c753b
Summary:
Transaction::GetForUpdate is extended with a do_validate parameter with default value of true. If false it skips validating the snapshot (if there is any) before doing the read. After the read it also returns the latest value (expects the ReadOptions::snapshot to be nullptr). This allows RocksDB applications to use GetForUpdate similarly to how InnoDB does. Similarly ::Merge, ::Put, ::Delete, and ::SingleDelete are extended with assume_exclusive_tracked with default value of false. It true it indicates that call is assumed to be after a ::GetForUpdate(do_validate=false).
The Java APIs are accordingly updated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4680
Differential Revision: D13068508
Pulled By: maysamyabandeh
fbshipit-source-id: f0b59db28f7f6a078b60844d902057140765e67d
Summary:
Current implementation of `current_over_upper_bound_` fails to take into consideration that keys might be invalid in either base iterator or delta iterator. Calling key() in such scenario will lead to assertion failure and runtime errors.
This PR addresses the bug by adding check for valid keys before calling `IsOverUpperBound()`, also added test coverage for iterate_upper_bound usage in BaseDeltaIterator
Also recommit https://github.com/facebook/rocksdb/pull/4656 (It was reverted earlier due to bugs)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4702
Differential Revision: D13146643
Pulled By: miasantreble
fbshipit-source-id: 6d136929da12d0f2e2a5cea474a8038ec5cdf1d0
Summary:
Added back `NO_ITERATORS` and moved `NO_ITERATOR_CREATED` to the end of `toCppTickers`.
This is a leftover fix which is needed in addition to a138e351bc to correctly convert java tickers to c++ tickers. a138e351bc only updated `toJavaTickerType` but both `toJavaTickerType` and `toCppTickers` need to be changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4719
Differential Revision: D13208847
Pulled By: sagar0
fbshipit-source-id: 53a42f3d6ffe04034acfde972d73040b92b4c1af
Summary:
Make CompactionOptionsFIFO's ttl and allow_compaction options to be available in RocksJava.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4609
Differential Revision: D12849503
Pulled By: sagar0
fbshipit-source-id: 47baa97918d252370f234c36c1af15ff2dad7658
Summary:
- Added back the `NO_ITERATORS` that was removed in 5945e16dfc.
- Marked it as deprecated since it is no longer populated, but kept for API compatibility.
- Made sure the new tickers, `NO_ITERATOR_CREATED` and `NO_ITERATOR_DELETED`, are appended at the end of the enum, in case people are relying on the int values.
The change where `NO_ITERATOR_CREATED` and `NO_ITERATOR_DELETED` were introduced is unreleased so I believe it is ok to change their ordering.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4701
Differential Revision: D13142887
Pulled By: ajkr
fbshipit-source-id: 29a336ce5b46632ce50ad42ccc4a29013f71d6d6
Summary:
Currently transaction iterator does not apply `ReadOptions.iterate_upper_bound` when iterating. This PR attempts to fix the problem by having `BaseDeltaIterator` enforcing the upper bound check when iterator state is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4656
Differential Revision: D13039257
Pulled By: miasantreble
fbshipit-source-id: 909eb9f6b4597a4d80418fb139f32ec82c6ec1d1
Summary:
Currently, `Statistics` can record tick by `recordTick()` whose second parameter is an `uint64_t`.
That means tick can only increase.
If we want to reduce tick, we have to work around like `RecordTick(statistics_, NO_ITERATORS, uint64_t(-1));`.
That's kind of a hack.
So, this PR divide `NO_ITERATORS` into two counters `NO_ITERATOR_CREATED` and `NO_ITERATOR_DELETE`, making the counters increase only.
Fixes#3013 .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4498
Differential Revision: D10395010
Pulled By: sagar0
fbshipit-source-id: cfb523b22a37411c794b4e9da090f1ae30293db2
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
1. `WriteBufferManager` should have a reference alive in Java side through `Options`/`DBOptions` otherwise, if it's GC'ed at java side, native side can seg fault.
2. native method `setWriteBufferManager()` in `DBOptions.java` doesn't have it's jni method invocation in rocksdbjni which is added in this PR
3. `DBOptionsTest.java` is referencing object of `Options`. Instead it should be testing against `DBOptions`. Seems like a copy paste error.
4. Add a getter for WriteBufferManager.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4579
Differential Revision: D10561150
Pulled By: sagar0
fbshipit-source-id: 139a15c7f051a9f77b4200215b88267b48fbc487
Summary:
Allow rocks java to explicitly create WriteBufferManager by plumbing it to the native code through JNI.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4492
Differential Revision: D10428506
Pulled By: sagar0
fbshipit-source-id: cd9dd8c2ef745a0303416b44e2080547bdcca1fd
Summary:
Closes https://github.com/facebook/rocksdb/issues/4195
CompactRangeOptions are available the CPP API, but not in the Java API. This PR adds CompactRangeOptions to the Java API and adds an overloaded compactRange() method. See https://github.com/facebook/rocksdb/issues/4195 for the original discussion.
This change supports all fields of CompactRangeOptions, including the required enum converters in the JNI portal.
Significant changes:
- Make CompactRangeOptions available in the compactRange() for Java.
- Deprecate other compactRange() methods that have individual option params, like in the CPP code.
- Migrate rocksdb_compactrange_helper() to CompactRangeOptions.
- Add Java unit tests for CompactRangeOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4220
Differential Revision: D9380007
Pulled By: sagar0
fbshipit-source-id: 6af6c334f221427f1997b33fb24c3986b092fed6
Summary:
Lint is not happy with some new code recently committed. Format them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4161
Differential Revision: D8940582
Pulled By: siying
fbshipit-source-id: c9b43b1ef8c88b5e923911058b44eb77234b36b7
Summary:
Fixing compilation, unsatisfied link exceptions (updated list of files that needs to be linked) and warnings for Windows build.
```C++
//MSVC 2015 does not support dynamic arrays like:
rocksdb::Slice key_parts[jkey_parts_len];
//I have converted to:
std::vector<rocksdb::Slice> key_parts;
```
Also reusing `free_key_parts` that does the same as `free_key_value_parts` that was removed.
Java elapsedTime unit test increase of sleep to 2 ms. Otherwise it was failing.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4015
Differential Revision: D8558215
Pulled By: sagar0
fbshipit-source-id: d3c34f846343f9218424da2402a2bd367bbd0aa2
Summary:
Fixes#3391.
This change adds a `DeleteRange` method to `SstFileWriter` and adds
support for ingesting SSTs with range deletion tombstones. This is
important for applications that need to atomically ingest SSTs while
clearing out any existing keys in a given key range.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3778
Differential Revision: D8821836
Pulled By: anand1976
fbshipit-source-id: ca7786c1947ff129afa703dab011d524c7883844
Summary:
Exposes BackupEngine::CreateNewBackupWithMetadata and BackupInfo metadata to the Java API.
Full disclaimer, I'm not familiar with JNI stuff, so I might have forgotten something (hopefully no memory leaks!). I also tried to find contributing guidelines but didn't see any, but I hope the PR style is consistent with the rest of the code base.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4111
Differential Revision: D8811180
Pulled By: ajkr
fbshipit-source-id: e38b3e396c7574328c2a1a0e55acc8d092b6a569
Summary:
Right now slow deletion with ftruncate doesn't work well with checkpoints because it ruin hard linked files in checkpoints. To fix it, check the file has no other hard link before ftruncate it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4093
Differential Revision: D8730360
Pulled By: siying
fbshipit-source-id: 756eea5bce8a87b9a2ea3a5bfa190b2cab6f75df
Summary:
This adds support for recovering WriteUnprepared transactions through the following changes:
- The information in `RecoveredTransaction` is extended so that it can reference multiple batches.
- `MarkBeginPrepare` is extended with a bool indicating whether it is an unprepared begin, and this is passed down to `InsertRecoveredTransaction` to indicate whether the current transaction is prepared or not.
- `WriteUnpreparedTxnDB::Initialize` is overridden so that it will rollback unprepared transactions from the recovered transactions. This can be done without updating the prepare heap/commit map, because this is before the DB has finished initializing, and after writing the rollback batch, those data structures should not contain information about the rolled back transaction anyway.
Commit/Rollback of live transactions is still unimplemented and will come later.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4078
Differential Revision: D8703382
Pulled By: lth
fbshipit-source-id: 7e0aada6c23bd39299f1f20d6c060492e0e6b60a
Summary:
It seems that compilation has been made stricter about unused args.
Closes https://github.com/facebook/rocksdb/pull/4080
Differential Revision: D8712049
Pulled By: sagar0
fbshipit-source-id: 984af1982638af3568aac1a167f565f4741badee
Summary:
…ression
For `CompressionType` we have options `compression` and `bottommost_compression`. Thus, to make the compression options consitent with the compression type when bottommost_compression is enabled, we add the bottommost_compression_opts
Closes https://github.com/facebook/rocksdb/pull/3985
Reviewed By: riversand963
Differential Revision: D8385911
Pulled By: zhichao-cao
fbshipit-source-id: 07bc533dd61bcf1cef5927d8d62901c13d38d5fc
Summary:
`SetByteArrayRegion` does not have const source buffer thus compilation error. I have made that same as in other JNI files (const_cast). It was missing for new transaction functionality added recently.
Closes https://github.com/facebook/rocksdb/pull/4013
Differential Revision: D8493290
Pulled By: sagar0
fbshipit-source-id: 14afedf365b111121bd11e68a8d546a1cae68b26
Summary:
1. Add a new ticker stat rocksdb.number.multiget.keys.found to track the
number of keys successfully read
2. Update rocksdb.memtable.hit/miss in DBImpl::MultiGet(). It was being done in
DBImpl::GetImpl(), but not MultiGet
Closes https://github.com/facebook/rocksdb/pull/3730
Differential Revision: D7677364
Pulled By: anand1976
fbshipit-source-id: af22bd0ef8ddc5cf2b4244b0a024e539fe48bca5
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
Changes to support sharing block cache using the Java API.
Previously DB instances could share the block cache only when the same Options instance is passed to all the DB instances. But now, with this change, it is possible to explicitly create a cache and pass it to multiple options instances, to share the block cache.
Implementing this for [Rocksandra](https://github.com/instagram/cassandra/tree/rocks_3.0), but this feature has been requested by many java api users over the years.
Closes https://github.com/facebook/rocksdb/pull/3623
Differential Revision: D7305794
Pulled By: sagar0
fbshipit-source-id: 03e4e8ed7aeee6f88bada4a8365d4279ede2ad71
Summary:
This is an abstraction for working with custom Comparators implemented in native C++ code from Java. Native code must directly extend `rocksdb::Comparator`. When the native code comparator is compiled into the RocksDB codebase, you can then create a Java Class, and JNI stub to wrap it.
Useful if the C++/JNI barrier overhead is too much for your applications comparator performance.
An example is provided in `java/rocksjni/native_comparator_wrapper_test.cc` and `java/src/main/java/org/rocksdb/NativeComparatorWrapperTest.java`.
Closes https://github.com/facebook/rocksdb/pull/3334
Differential Revision: D7172605
Pulled By: miasantreble
fbshipit-source-id: e24b7eb267a3bcb6afa214e0379a1d5e8a2ceabe
