Summary:
The Block object assumes contents are uncompressed. Block's constructor tries to read the number of restarts, but does not get an accurate number when its contents are compressed, which is causing issues like https://github.com/facebook/rocksdb/issues/3843.
This PR address this issue by skipping reconstruction of restart points when blocks are known to be compressed. Somehow the restart points can be read directly when Snappy is used and some tests (for example https://github.com/facebook/rocksdb/blob/master/db/db_block_cache_test.cc#L196) expects blocks to be fully constructed even when Snappy compression is used, so here we keep the restart point logic for Snappy.
Closes https://github.com/facebook/rocksdb/pull/3996
Differential Revision: D8416186
Pulled By: miasantreble
fbshipit-source-id: 002c0b62b9e5d89fb7736563d354ce0023c8cb28
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
Before this PR, Iterator/InternalIterator may simultaneously have non-ok status() and Valid() = true. That state means that the last operation failed, but the iterator is nevertheless positioned on some unspecified record. Likely intended uses of that are:
* If some sst files are corrupted, a normal iterator can be used to read the data from files that are not corrupted.
* When using read_tier = kBlockCacheTier, read the data that's in block cache, skipping over the data that is not.
However, this behavior wasn't documented well (and until recently the wiki on github had misleading incorrect information). In the code there's a lot of confusion about the relationship between status() and Valid(), and about whether Seek()/SeekToLast()/etc reset the status or not. There were a number of bugs caused by this confusion, both inside rocksdb and in the code that uses rocksdb (including ours).
This PR changes the convention to:
* If status() is not ok, Valid() always returns false.
* Any seek operation resets status. (Before the PR, it depended on iterator type and on particular error.)
This does sacrifice the two use cases listed above, but siying said it's ok.
Overview of the changes:
* A commit that adds missing status checks in MergingIterator. This fixes a bug that actually affects us, and we need it fixed. `DBIteratorTest.NonBlockingIterationBugRepro` explains the scenario.
* Changes to lots of iterator types to make all of them conform to the new convention. Some bug fixes along the way. By far the biggest changes are in DBIter, which is a big messy piece of code; I tried to make it less big and messy but mostly failed.
* A stress-test for DBIter, to gain some confidence that I didn't break it. It does a few million random operations on the iterator, while occasionally modifying the underlying data (like ForwardIterator does) and occasionally returning non-ok status from internal iterator.
To find the iterator types that needed changes I searched for "public .*Iterator" in the code. Here's an overview of all 27 iterator types:
Iterators that didn't need changes:
* status() is always ok(), or Valid() is always false: MemTableIterator, ModelIter, TestIterator, KVIter (2 classes with this name anonymous namespaces), LoggingForwardVectorIterator, VectorIterator, MockTableIterator, EmptyIterator, EmptyInternalIterator.
* Thin wrappers that always pass through Valid() and status(): ArenaWrappedDBIter, TtlIterator, InternalIteratorFromIterator.
Iterators with changes (see inline comments for details):
* DBIter - an overhaul:
- It used to silently skip corrupted keys (`FindParseableKey()`), which seems dangerous. This PR makes it just stop immediately after encountering a corrupted key, just like it would for other kinds of corruption. Let me know if there was actually some deeper meaning in this behavior and I should put it back.
- It had a few code paths silently discarding subiterator's status. The stress test caught a few.
- The backwards iteration code path was expecting the internal iterator's set of keys to be immutable. It's probably always true in practice at the moment, since ForwardIterator doesn't support backwards iteration, but this PR fixes it anyway. See added DBIteratorTest.ReverseToForwardBug for an example.
- Some parts of backwards iteration code path even did things like `assert(iter_->Valid())` after a seek, which is never a safe assumption.
- It used to not reset status on seek for some types of errors.
- Some simplifications and better comments.
- Some things got more complicated from the added error handling. I'm open to ideas for how to make it nicer.
* MergingIterator - check status after every operation on every subiterator, and in some places assert that valid subiterators have ok status.
* ForwardIterator - changed to the new convention, also slightly simplified.
* ForwardLevelIterator - fixed some bugs and simplified.
* LevelIterator - simplified.
* TwoLevelIterator - changed to the new convention. Also fixed a bug that would make SeekForPrev() sometimes silently ignore errors from first_level_iter_.
* BlockBasedTableIterator - minor changes.
* BlockIter - replaced `SetStatus()` with `Invalidate()` to make sure non-ok BlockIter is always invalid.
* PlainTableIterator - some seeks used to not reset status.
* CuckooTableIterator - tiny code cleanup.
* ManagedIterator - fixed some bugs.
* BaseDeltaIterator - changed to the new convention and fixed a bug.
* BlobDBIterator - seeks used to not reset status.
* KeyConvertingIterator - some small change.
Closes https://github.com/facebook/rocksdb/pull/3810
Differential Revision: D7888019
Pulled By: al13n321
fbshipit-source-id: 4aaf6d3421c545d16722a815b2fa2e7912bc851d
Summary:
Adds two stats to allow us measuring the false positive rate of full filters:
- The total count of positives: rocksdb.bloom.filter.full.positive
- The total count of true positives: rocksdb.bloom.filter.full.true.positive
Not the term "full" in the stat name to indicate that they are meaningful in full filters. block-based filters are to be deprecated soon and supporting it is not worth the the additional cost of if-then-else branches.
Closes#3680
Tested by:
$ ./db_bench -benchmarks=fillrandom -db /dev/shm/rocksdb-tmpdb --num=1000000 -bloom_bits=10
$ ./db_bench -benchmarks="readwhilewriting" -db /dev/shm/rocksdb-tmpdb --statistics -bloom_bits=10 --duration=60 --num=2000000 --use_existing_db 2>&1 > /tmp/full.log
$ grep filter.full /tmp/full.log
rocksdb.bloom.filter.full.positive COUNT : 3628593
rocksdb.bloom.filter.full.true.positive COUNT : 3536026
which gives the false positive rate of 2.5%
Closes https://github.com/facebook/rocksdb/pull/3681
Differential Revision: D7517570
Pulled By: maysamyabandeh
fbshipit-source-id: 630ab1a473afdce404916d297035b6318de4c052
Summary:
table/block.cc:
420 }
CID 1396127 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
7. uninit_member: Non-static class member restart_offset_ is not initialized in this constructor nor in any functions that it calls.
421}
table/block_based_table_builder.cc:
CID 1418259 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
7. uninit_member: Non-static class member compressed_cache_key_prefix_size is not initialized in this constructor nor in any functions that it calls.
table/block_based_table_reader.h:
3. uninit_member: Non-static class member index_type is not initialized in this constructor nor in any functions that it calls.
CID 1396147 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
5. uninit_member: Non-static class member hash_index_allow_collision is not initialized in this constructor nor in any functions that it calls.
413 global_seqno(kDisableGlobalSequenceNumber) {}
414
table/cuckoo_table_reader.cc:
55 if (hash_funs == user_props.end()) {
56 status_ = Status::Corruption("Number of hash functions not found");
5. uninit_member: Non-static class member is_last_level_ is not initialized in this constructor nor in any functions that it calls.
7. uninit_member: Non-static class member identity_as_first_hash_ is not initialized in this constructor nor in any functions that it calls.
9. uninit_member: Non-static class member use_module_hash_ is not initialized in this constructor nor in any functions that it calls.
11. uninit_member: Non-static class member num_hash_func_ is not initialized in this constructor nor in any functions that it calls.
13. uninit_member: Non-static class member key_length_ is not initialized in this constructor nor in any functions that it calls.
15. uninit_member: Non-static class member user_key_length_ is not initialized in this constructor nor in any functions that it calls.
17. uninit_member: Non-static class member value_length_ is not initialized in this constructor nor in any functions that it calls.
19. uninit_member: Non-static class member bucket_length_ is not initialized in this constructor nor in any functions that it calls.
21. uninit_member: Non-static class member cuckoo_block_size_ is not initialized in this constructor nor in any functions that it calls.
23. uninit_member: Non-static class member cuckoo_block_bytes_minus_one_ is not initialized in this constructor nor in any functions that it calls.
CID 1322785 (#2 of 2): Uninitialized scalar field (UNINIT_CTOR)
25. uninit_member: Non-static class member table_size_ is not initialized in this constructor nor in any functions that it calls.
57 return;
table/plain_table_index.h:
2. uninit_member: Non-static class member index_size_ is not initialized in this constructor nor in any functions that it calls.
CID 1322801 (#1 of 1): Uninitialized scalar field (UNINIT_CTOR)
4. uninit_member: Non-static class member sub_index_size_ is not initialized in this constructor nor in any functions that it calls.
128 huge_page_tlb_size_(huge_page_tlb_size) {}
129
Closes https://github.com/facebook/rocksdb/pull/3113
Differential Revision: D6505719
Pulled By: yiwu-arbug
fbshipit-source-id: 38f44d8f9dfefb4c2e25d83b8df25a5201c75618
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
Fixes the following scenario:
1. Set prefix extractor. Enable bloom filters, with `whole_key_filtering = false`. Use compaction filter that sometimes returns `kRemoveAndSkipUntil`.
2. Do a compaction.
3. Compaction creates an iterator with `total_order_seek = false`, calls `SeekToFirst()` on it, then repeatedly calls `Next()`.
4. At some point compaction filter returns `kRemoveAndSkipUntil`.
5. Compaction calls `Seek(skip_until)` on the iterator. The key that it seeks to happens to have prefix that doesn't match the bloom filter. Since `total_order_seek = false`, iterator becomes invalid, and compaction thinks that it has reached the end. The rest of the compaction input is silently discarded.
The fix is to make compaction iterator use `total_order_seek = true`.
The implementation for PlainTable is quite awkward. I've made `kRemoveAndSkipUntil` officially incompatible with PlainTable. If you try to use them together, compaction will fail, and DB will enter read-only mode (`bg_error_`). That's not a very graceful way to communicate a misconfiguration, but the alternatives don't seem worth the implementation time and complexity. To be able to check in advance that `kRemoveAndSkipUntil` is not going to be used with PlainTable, we'd need to extend the interface of either `CompactionFilter` or `InternalIterator`. It seems unlikely that anyone will ever want to use `kRemoveAndSkipUntil` with PlainTable: PlainTable probably has very few users, and `kRemoveAndSkipUntil` has only one user so far: us (logdevice).
Closes https://github.com/facebook/rocksdb/pull/2349
Differential Revision: D5110388
Pulled By: lightmark
fbshipit-source-id: ec29101a99d9dcd97db33923b87f72bce56cc17a
Summary:
Now if we have iterate_upper_bound set, we continue read until get a key >= upper_bound. For a lot of cases that neighboring data blocks have a user key gap between them, our index key will be a user key in the middle to get a shorter size. For example, if we have blocks:
[a b c d][f g h]
Then the index key for the first block will be 'e'.
then if upper bound is any key between 'd' and 'e', for example, d1, d2, ..., d99999999999, we don't have to read the second block and also know that we have done our iteration by reaching the last key that smaller the upper bound already.
This diff can reduce RA in most cases.
Closes https://github.com/facebook/rocksdb/pull/2239
Differential Revision: D4990693
Pulled By: lightmark
fbshipit-source-id: ab30ea2e3c6edf3fddd5efed3c34fcf7739827ff
Summary:
to void future bug that caused by the mix of userkey/internalkey
Closes https://github.com/facebook/rocksdb/pull/2084
Differential Revision: D4825889
Pulled By: lightmark
fbshipit-source-id: 28411db
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
* Added new statistics and refactored to allow ioptions to be passed around as required to access environment and statistics pointers (and, as a convenient side effect, info_log pointer).
* Prevent incrementing compression counter when compression is turned off in options.
* Prevent incrementing compression counter when compression is turned off in options.
* Added two more supported compression types to test code in db_test.cc
* Prevent incrementing compression counter when compression is turned off in options.
* Added new StatsLevel that excludes compression timing.
* Fixed casting error in coding.h
* Fixed CompressionStatsTest for new StatsLevel.
* Removed unused variable that was breaking the Linux build
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary:
In some cases, equality comparisons can be done more efficiently than three-way
comparisons. There are quite a few places in the code where we only care about
equality. This patch adds an Equal() method that defaults to using the
Compare() method.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, igor, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46233
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Fix for:
[table/cuckoo_table_reader.cc:196]: (performance) Function
parameter 'target' should be passed by reference.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Fix for:
[table/cuckoo_table_reader.cc:198]: (performance) Function
parameter 'file_data' should be passed by reference.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Summary:
Intead of passing callback function pointer and its arg on Table::Get()
interface, passing GetContext. This makes the interface cleaner and
possible better perf. Also adding a fast pass for SaveValue()
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24057
Summary:
cuckoo table iterator creation is quite expensive since it needs to load
all data and sort them. After compaction, RocksDB creates a new iterator
of the new file to make sure it is in good state. That makes the DB
creation quite slow. Delay the iterator db sort to the seek time to
speed it up.
Test Plan: db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23775
Summary:
When creating a new iterator, instead of storing mapping from key to
bucket id for sorting, store only bucket id and read key from mmap file
based on the id. This reduces from 20 bytes per entry to only 4 bytes.
Test Plan: db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23757
Summary:
Using module to calculate hash makes lookup ~8% slower. But it has its
benefit: file size is more predictable, more space enffient
Test Plan: db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23691
Summary:
Add a CompactedDBImpl that will enabled when calling OpenForReadOnly()
and the DB only has one level (>0) of files. As a performan comparison,
CuckooTable performs 2.1M/s with CompactedDBImpl vs. 1.78M/s with
ReadOnlyDBImpl.
Test Plan: db_bench
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23553
Summary:
MurmurHash becomes expensive when we do millions Get() a second in one
thread. Add this option to allow the first hash function to use identity
function as hash function. It results in QPS increase from 3.7M/s to
~4.3M/s. I did not observe improvement for end to end RocksDB
performance. This may be caused by other bottlenecks that I will address
in a separate diff.
Test Plan:
```
[ljin@dev1964 rocksdb] ./cuckoo_table_reader_test --enable_perf --file_dir=/dev/shm --write --identity_as_first_hash=0
==== Test CuckooReaderTest.WhenKeyExists
==== Test CuckooReaderTest.WhenKeyExistsWithUint64Comparator
==== Test CuckooReaderTest.CheckIterator
==== Test CuckooReaderTest.CheckIteratorUint64
==== Test CuckooReaderTest.WhenKeyNotFound
==== Test CuckooReaderTest.TestReadPerformance
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.272us (3.7 Mqps) with batch size of 0, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.138us (7.2 Mqps) with batch size of 10, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.142us (7.1 Mqps) with batch size of 25, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.142us (7.0 Mqps) with batch size of 50, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.144us (6.9 Mqps) with batch size of 100, # of found keys 125829120
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.201us (5.0 Mqps) with batch size of 0, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.121us (8.3 Mqps) with batch size of 10, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.123us (8.1 Mqps) with batch size of 25, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.121us (8.3 Mqps) with batch size of 50, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.112us (8.9 Mqps) with batch size of 100, # of found keys 104857600
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.251us (4.0 Mqps) with batch size of 0, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.107us (9.4 Mqps) with batch size of 10, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.099us (10.1 Mqps) with batch size of 25, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.100us (10.0 Mqps) with batch size of 50, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.116us (8.6 Mqps) with batch size of 100, # of found keys 83886080
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.189us (5.3 Mqps) with batch size of 0, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.095us (10.5 Mqps) with batch size of 10, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.096us (10.4 Mqps) with batch size of 25, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.098us (10.2 Mqps) with batch size of 50, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.105us (9.5 Mqps) with batch size of 100, # of found keys 73400320
[ljin@dev1964 rocksdb] ./cuckoo_table_reader_test --enable_perf --file_dir=/dev/shm --write --identity_as_first_hash=1
==== Test CuckooReaderTest.WhenKeyExists
==== Test CuckooReaderTest.WhenKeyExistsWithUint64Comparator
==== Test CuckooReaderTest.CheckIterator
==== Test CuckooReaderTest.CheckIteratorUint64
==== Test CuckooReaderTest.WhenKeyNotFound
==== Test CuckooReaderTest.TestReadPerformance
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.230us (4.3 Mqps) with batch size of 0, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.086us (11.7 Mqps) with batch size of 10, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.088us (11.3 Mqps) with batch size of 25, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.083us (12.1 Mqps) with batch size of 50, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.083us (12.1 Mqps) with batch size of 100, # of found keys 125829120
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.159us (6.3 Mqps) with batch size of 0, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 10, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.080us (12.6 Mqps) with batch size of 25, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 50, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.082us (12.2 Mqps) with batch size of 100, # of found keys 104857600
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.154us (6.5 Mqps) with batch size of 0, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 10, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.077us (12.9 Mqps) with batch size of 25, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 50, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.079us (12.6 Mqps) with batch size of 100, # of found keys 83886080
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.218us (4.6 Mqps) with batch size of 0, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.083us (12.0 Mqps) with batch size of 10, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.085us (11.7 Mqps) with batch size of 25, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.086us (11.6 Mqps) with batch size of 50, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 100, # of found keys 73400320
```
Reviewers: sdong, igor, yhchiang
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23451
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545
Summary:
Use inlined hash functions instead of function pointer. Make number of buckets a power of two and use bitwise and instead of mod.
After these changes, we get almost 50% improvement in performance.
Results:
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.231us (4.3 Mqps) with batch size of 0
Time taken per op is 0.229us (4.4 Mqps) with batch size of 0
Time taken per op is 0.185us (5.4 Mqps) with batch size of 0
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.108us (9.3 Mqps) with batch size of 10
Time taken per op is 0.100us (10.0 Mqps) with batch size of 10
Time taken per op is 0.103us (9.7 Mqps) with batch size of 10
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.101us (9.9 Mqps) with batch size of 25
Time taken per op is 0.098us (10.2 Mqps) with batch size of 25
Time taken per op is 0.097us (10.3 Mqps) with batch size of 25
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.100us (10.0 Mqps) with batch size of 50
Time taken per op is 0.097us (10.3 Mqps) with batch size of 50
Time taken per op is 0.097us (10.3 Mqps) with batch size of 50
With 120000000 items, utilization is 89.41%, number of hash functions: 2.
Time taken per op is 0.102us (9.8 Mqps) with batch size of 100
Time taken per op is 0.098us (10.2 Mqps) with batch size of 100
Time taken per op is 0.115us (8.7 Mqps) with batch size of 100
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.201us (5.0 Mqps) with batch size of 0
Time taken per op is 0.155us (6.5 Mqps) with batch size of 0
Time taken per op is 0.152us (6.6 Mqps) with batch size of 0
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.089us (11.3 Mqps) with batch size of 10
Time taken per op is 0.084us (11.9 Mqps) with batch size of 10
Time taken per op is 0.086us (11.6 Mqps) with batch size of 10
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.087us (11.5 Mqps) with batch size of 25
Time taken per op is 0.085us (11.7 Mqps) with batch size of 25
Time taken per op is 0.093us (10.8 Mqps) with batch size of 25
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.094us (10.6 Mqps) with batch size of 50
Time taken per op is 0.094us (10.7 Mqps) with batch size of 50
Time taken per op is 0.093us (10.8 Mqps) with batch size of 50
With 100000000 items, utilization is 74.51%, number of hash functions: 2.
Time taken per op is 0.092us (10.9 Mqps) with batch size of 100
Time taken per op is 0.089us (11.2 Mqps) with batch size of 100
Time taken per op is 0.088us (11.3 Mqps) with batch size of 100
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.154us (6.5 Mqps) with batch size of 0
Time taken per op is 0.168us (6.0 Mqps) with batch size of 0
Time taken per op is 0.190us (5.3 Mqps) with batch size of 0
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.081us (12.4 Mqps) with batch size of 10
Time taken per op is 0.077us (13.0 Mqps) with batch size of 10
Time taken per op is 0.083us (12.1 Mqps) with batch size of 10
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 25
Time taken per op is 0.073us (13.7 Mqps) with batch size of 25
Time taken per op is 0.073us (13.7 Mqps) with batch size of 25
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.076us (13.1 Mqps) with batch size of 50
Time taken per op is 0.072us (13.8 Mqps) with batch size of 50
Time taken per op is 0.072us (13.8 Mqps) with batch size of 50
With 80000000 items, utilization is 59.60%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 100
Time taken per op is 0.074us (13.6 Mqps) with batch size of 100
Time taken per op is 0.073us (13.6 Mqps) with batch size of 100
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.190us (5.3 Mqps) with batch size of 0
Time taken per op is 0.186us (5.4 Mqps) with batch size of 0
Time taken per op is 0.184us (5.4 Mqps) with batch size of 0
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.079us (12.7 Mqps) with batch size of 10
Time taken per op is 0.070us (14.2 Mqps) with batch size of 10
Time taken per op is 0.072us (14.0 Mqps) with batch size of 10
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 25
Time taken per op is 0.072us (14.0 Mqps) with batch size of 25
Time taken per op is 0.071us (14.1 Mqps) with batch size of 25
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.082us (12.1 Mqps) with batch size of 50
Time taken per op is 0.071us (14.1 Mqps) with batch size of 50
Time taken per op is 0.073us (13.6 Mqps) with batch size of 50
With 70000000 items, utilization is 52.15%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 100
Time taken per op is 0.077us (13.0 Mqps) with batch size of 100
Time taken per op is 0.078us (12.8 Mqps) with batch size of 100
Test Plan:
make check all
make valgrind_check
make asan_check
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22539
Summary: This implements a cache friendly version of Cuckoo Hash in which, in case of collission, we try to insert in next few locations. The size of the neighborhood to check is taken as an input parameter in builder and stored in the table.
Test Plan:
make check all
cuckoo_table_{db,reader,builder}_test
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22455
Summary:
- New Uint64 comparator
- Modify Reader and Builder to take custom user comparators instead of bytewise comparator
- Modify logic for choosing unused user key in builder
- Modify iterator logic in reader
- test changes
Test Plan:
cuckoo_table_{builder,reader,db}_test
make check all
Reviewers: ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22377
Summary:
- Implement Prepare method
- Rewrite performance tests in cuckoo_table_reader_test to write new file only if one doesn't already exist.
- Add performance tests for batch lookup along with prefetching.
Test Plan:
./cuckoo_table_reader_test --enable_perf
Results (We get better results if we used int64 comparator instead of string comparator (TBD in future diffs)):
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.208us (4.8 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.182us (5.5 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.161us (6.2 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.161us (6.2 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.500000, number of hash functions used: 2.
Time taken per op is 0.163us (6.1 Mqps) with batch size of 100
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.252us (4.0 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.192us (5.2 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.195us (5.1 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.191us (5.2 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.600000, number of hash functions used: 3.
Time taken per op is 0.194us (5.1 Mqps) with batch size of 100
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.228us (4.4 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.185us (5.4 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.186us (5.4 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.189us (5.3 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.750000, number of hash functions used: 3.
Time taken per op is 0.188us (5.3 Mqps) with batch size of 100
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.325us (3.1 Mqps) with batch size of 0
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.196us (5.1 Mqps) with batch size of 10
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.199us (5.0 Mqps) with batch size of 25
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.196us (5.1 Mqps) with batch size of 50
With 100000000 items and hash table ratio 0.900000, number of hash functions used: 3.
Time taken per op is 0.209us (4.8 Mqps) with batch size of 100
Reviewers: sdong, yhchiang, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22167
Summary:
Contains the following changes:
- Implementation of cuckoo_table_factory
- Adding cuckoo table into AdaptiveTableFactory
- Adding cuckoo_table_db_test, similar to lines of plain_table_db_test
- Minor fixes to Reader: When a key is found in the table, return the key found instead of the search key.
- Minor fixes to Builder: Add table properties that are required by Version::UpdateTemporaryStats() during Get operation. Don't define curr_node as a reference variable as the memory locations may get reassigned during tree.push_back operation, leading to invalid memory access.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
cuckoo_table_db_test
make check all
make valgrind_check
make asan_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21219
Summary:
Add a DB Property "rocksdb.estimate-table-readers-mem" to return estimated memory usage by all loaded table readers, other than allocated from block cache.
Refactor the property codes to allow getting property from a version, with DB mutex not acquired.
Test Plan: Add several checks of this new property in existing codes for various cases.
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D20733
Summary:
- Maintain a list of key-value pairs as vectors during Add operation.
- Start building hash table only when Finish() is called.
- This approach takes more time and space but avoids taking file_size, key and value lengths.
- Rewrote cuckoo_table_builder_test
I did not know about IterKey while writing this diff. I shall change places where IterKey could be used instead of std::string tomorrow. Please review rest of the logic.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
valgrind_check
asan_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20907
Summary:
- Reads key-value pairs from file and builds an in-memory index of key-to-bucket id map in sorted order of key.
- Assumes bytewise comparator for sorting keys.
- Test changes
Test Plan:
cuckoo_table_reader_test --enable_perf
valgrind_check
asan_check
Reviewers: yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb, igor
Differential Revision: https://reviews.facebook.net/D20721
Summary: Made some small changes to fix the broken mac build
Test Plan: make check all in both linux and mac. All tests pass.
Reviewers: sdong, igor, ljin, yhchiang
Reviewed By: ljin, yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20895
Summary:
Contains:
- Implementation of TableReader based on Cuckoo Hashing
- Unittests for CuckooTableReader
- Performance test for TableReader
Test Plan:
make cuckoo_table_reader_test
./cuckoo_table_reader_test
make valgrind_check
make asan_check
Reviewers: yhchiang, sdong, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20511
