Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary:
D51183 was reverted due to breaking the LITE build.
This diff is the same as D51183 but with a fix for the LITE BUILD(D51693)
Test Plan: run all unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51711
Summary:
D50475 enables using SST files for transaction write-conflict checking. In order for this to work, we need to make sure not to compact out SingleDeletes when there is an earlier transaction snapshot(D50295). If there is a long-held snapshot, this could reduce the benefit of the SingleDelete optimization.
This diff allows Transactions to mark snapshots as being used for write-conflict checking. Then, during compaction, we will be able to optimize SingleDeletes better in the future.
This diff adds a flag to SnapshotImpl which is used by Transactions. This diff also passes the earliest write-conflict snapshot's sequence number to CompactionIterator. This diff does not actually change Compaction (after this diff is pushed, D50295 will be able to use this information).
Test Plan: no behavior change, ran existing tests
Reviewers: rven, kradhakrishnan, yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51183
Summary: When SetSnapshot() is used the caller immediately knows a snapshot has been created, but when SetSnapshotOnNextOperation() is used the caller needs a way to get notified when that snapshot has been generated. This creates an interface that the client can implement that will be called at the time the snapshot is created.
Test Plan: Added a new SetSnapshotOnNextOperationWithNotification test into the transaction_test.
Reviewers: sdong, anthony
Reviewed By: anthony
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51177
Summary:
Fixes T8781168.
Added a new function EnableAutoCompactions in db.h to be publicly
avialable. This allows compaction to be re-enabled after disabling it via
SetOptions
Refactored code to set the dbptr earlier on in TransactionDB::Open and DB::Open
Temporarily disable auto_compaction in TransactionDB::Open until dbptr is set to
prevent race condition.
Test Plan:
Ran make all check
verified fix on myrocks side:
was able to reproduce the seg fault with
../tools/mysqltest.sh --mem --force rocksdb.drop_table
method was to manually sleep the thread after DB::Open but before TransactionDB ptr was
assigned in transaction_db_impl.cc:
DB::Open(db_options, dbname, column_families_copy, handles, &db);
clock_t goal = (60000 * 10) + clock();
while (goal > clock());
...dbptr(aka rdb) gets assigned below
verified my changes fixed the issue.
Also added unit test 'ToggleAutoCompaction' in transaction_test.cc
Reviewers: hermanlee4, anthony
Reviewed By: anthony
Subscribers: alex, dhruba
Differential Revision: https://reviews.facebook.net/D51147
Summary:
MyRocks needs the ability to clear a snapshot for Read Committed support
Test Plan: transaction_test
Reviewers: anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48861
Summary: Support for Transaction::CreateSnapshotOnNextOperation(). This is to fix a write-conflict race-condition that Yoshinori was running into when testing MyRocks with LinkBench.
Test Plan: New tests
Reviewers: yhchiang, spetrunia, rven, igor, yoshinorim, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48099
Summary:
MyRocks reported some perfomance issues when inserting many keys into a transaction due to the cost of inserting new keys into WriteBatchWithIndex. Frequently, they don't even need the keys to be indexed as they don't need to read them back. DisableIndexing() can be used to avoid the cost of indexing.
I also plan on eventually investigating if we can improve WriteBatchWithIndex performance. But even if we improved the perf here, it is still beneficial to be able to disable the indexing all together for large transactions.
Test Plan: unit test
Reviewers: igor, rven, yoshinorim, spetrunia, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48471
Summary:
WriteBatchWithIndex::GetFromBatchAndDB only works correctly for overwrite_key=false. Transactions use overwrite_key=true (since WriteBatchWithIndex::GetIteratorWithBase only works when overwrite_key=true). So currently, Transactions could return incorrectly merged results when calling Get/GetForUpdate().
Until a permanent fix can be put in place, Transaction::Get[ForUpdate] and WriteBatchWithIndex::GetFromBatch[AndDB] will now return MergeInProgress if the most recent write to a key in the batch is a Merge.
Test Plan: more tests
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47817
Summary: Should have used auto& instead of auto. Also needed to change the code a bit due to const correctness.
Test Plan: unit tests
Reviewers: sdong, igor, yoshinorim, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47787
Summary: Transactional SingleDelete is needed for MyRocks. Note: This diff requires D47529.
Test Plan: Added some new tests in this diff as well as more tests added in D47529
Reviewers: rven, sdong, igor, yhchiang
Reviewed By: yhchiang
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47535
Summary: Transaction::RollbackToSavePoint() will now release any locks that were taken since the previous SavePoint. To do this cleanly, I moved tracked_keys_ management into TransactionBase.
Test Plan: New Transaction test.
Reviewers: igor, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, spetrunia, leveldb
Differential Revision: https://reviews.facebook.net/D46761
Summary: Added funtions to fetch the number of locked keys in a transaction, the number of pending puts/merge/deletes, and the elapsed time
Test Plan: unit tests
Reviewers: yoshinorim, jkedgar, rven, sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45417
Summary:
Prototype of API to allow MyRocks to override default Mutex/CondVar used by transactions with their own implementations. They would simply need to pass their own implementations of Mutex/CondVar to the templated TransactionDB::Open().
Default implementation of TransactionDBMutex/TransactionDBCondVar provided (but the code is not currently changed to use this).
Let me know if this API makes sense or if it should be changed
Test Plan: n/a
Reviewers: yhchiang, rven, igor, sdong, spetrunia
Reviewed By: spetrunia
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43761
Summary: MyRocks wants to be able to change the lock timeout of a transaction that has already started. Expose existing SetLockTimeout function to users.
Test Plan: unit test
Reviewers: spetrunia, rven, sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45987
Summary: Provide a way to specify a detailed static error message for a Status without incurring a memcpy. Let me know what people think of this approach.
Test Plan: added simple test
Reviewers: igor, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D44259
Summary:
As I keep adding new features to transactions, I keep creating more duplicate code. This diff cleans this up by creating a base implementation class for Transaction and OptimisticTransaction to inherit from.
The code in TransactionBase.h/.cc is all just copied from elsewhere. The only entertaining part of this class worth looking at is the virtual TryLock method which allows OptimisticTransactions and Transactions to share the same common code for Put/Get/etc.
The rest of this diff is mostly red and easy on the eyes.
Test Plan: No functionality change. existing tests pass.
Reviewers: sdong, jkedgar, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45135
Summary:
Clean up transactions to use the new RollbackToSavePoint api in WriteBatchWithIndex.
Note, this diff depends on Pessimistic Transactions diff and ManagedSnapshot diff (D40869 and D43293).
Test Plan: unit tests
Reviewers: rven, yhchiang, kradhakrishnan, spetrunia, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43371
Summary:
Initial implementation of Pessimistic Transactions. This diff contains the api changes discussed in D38913. This diff is pretty large, so let me know if people would prefer to meet up to discuss it.
MyRocks folks: please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.
Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint(). After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex. We can then decide which route is preferable.
Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.
Test Plan: Unit tests, db_bench parallel testing.
Reviewers: igor, rven, sdong, yhchiang, yoshinorim
Reviewed By: sdong
Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40869
Summary: Adding a main for optimistic_transaction_test that report that it was skipped when using ROCKSDB_LITE
Test Plan: optimistic_transaction_test
Reviewers: yhchiang, sdong, igor, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D41979
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
