Summary:
In the past, we unnecessarily requires all keys in the same write batch
to be from column families whose timestamps' formats are the same for
simplicity. Specifically, we cannot use the same write batch to write to
two column families, one of which enables timestamp while the other
disables it.
The limitation is due to the member `timestamp_size_` that used to exist
in each `WriteBatch` object. We pass a timestamp_size to the constructor
of `WriteBatch`. Therefore, users can simply use the old
`WriteBatch::Put()`, `WriteBatch::Delete()`, etc APIs for write, while
the internal implementation of `WriteBatch` will take care of memory
allocation for timestamps.
The above is not necessary.
One the one hand, users can set up a memory buffer to store user key and
then contiguously append the timestamp to the user key. Then the user
can pass this buffer to the `WriteBatch::Put(Slice&)` API.
On the other hand, users can set up a SliceParts object which is an
array of Slices and let the last Slice to point to the memory buffer
storing timestamp. Then the user can pass the SliceParts object to the
`WriteBatch::Put(SliceParts&)` API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8725
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D30654499
Pulled By: riversand963
fbshipit-source-id: 9d848c77ad3c9dd629aa5fc4e2bc16fb0687b4a2
Summary:
It's always annoying to find a header does not include its own
dependencies and only works when included after other includes. This
change adds `make check-headers` which validates that each header can
be included at the top of a file. Some headers are excluded e.g. because
of platform or external dependencies.
rocksdb_namespace.h had to be re-worked slightly to enable checking for
failure to include it. (ROCKSDB_NAMESPACE is a valid namespace name.)
Fixes mostly involve adding and cleaning up #includes, but for
FileTraceWriter, a constructor was out-of-lined to make a forward
declaration sufficient.
This check is not currently run with `make check` but is added to
CircleCI build-linux-unity since that one is already relatively fast.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8893
Test Plan: existing tests and resolving issues detected by new check
Reviewed By: mrambacher
Differential Revision: D30823300
Pulled By: pdillinger
fbshipit-source-id: 9fff223944994c83c105e2e6496d24845dc8e572
Summary:
Make the Statistics object into a Customizable object. Statistics can now be stored and created to/from the Options file.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8637
Reviewed By: zhichao-cao
Differential Revision: D30530550
Pulled By: mrambacher
fbshipit-source-id: 5fc7d01d8431f37b2c205bbbd8342c9f697023bd
Summary:
Support custom Env in these tests. Some custom Envs do not support reopening a file for write, either normal mode or Random RW mode. Added some additional checks in external_sst_file_basic_test to accommodate those Envs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8888
Reviewed By: riversand963
Differential Revision: D30824481
Pulled By: anand1976
fbshipit-source-id: c3ac7a628e6df29e94f42e370e679934a4f77eac
Summary:
RocksDB exposes certain internal statistics via the DB property interface.
However, there are currently no properties related to BlobDB.
For starters, we would like to add the following BlobDB properties:
`rocksdb.num-blob-files`: number of blob files in the current Version (kind of like `num-files-at-level` but note this is not per level, since blob files are not part of the LSM tree).
`rocksdb.blob-stats`: this could return the total number and size of all blob files, and potentially also the total amount of garbage (in bytes) in the blob files in the current Version.
`rocksdb.total-blob-file-size`: the total size of all blob files (as a blob counterpart for `total-sst-file-size`) of all Versions.
`rocksdb.live-blob-file-size`: the total size of all blob files in the current Version.
`rocksdb.estimate-live-data-size`: this is actually an existing property that we can extend so it considers blob files as well. When it comes to blobs, we actually have an exact value for live bytes. Namely, live bytes can be computed simply as total bytes minus garbage bytes, summed over the entire set of blob files in the Version.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8734
Test Plan:
```
➜ rocksdb git:(new_feature_blobDB_properties) ./db_blob_basic_test
[==========] Running 16 tests from 2 test cases.
[----------] Global test environment set-up.
[----------] 10 tests from DBBlobBasicTest
[ RUN ] DBBlobBasicTest.GetBlob
[ OK ] DBBlobBasicTest.GetBlob (12 ms)
[ RUN ] DBBlobBasicTest.MultiGetBlobs
[ OK ] DBBlobBasicTest.MultiGetBlobs (11 ms)
[ RUN ] DBBlobBasicTest.GetBlob_CorruptIndex
[ OK ] DBBlobBasicTest.GetBlob_CorruptIndex (10 ms)
[ RUN ] DBBlobBasicTest.GetBlob_InlinedTTLIndex
[ OK ] DBBlobBasicTest.GetBlob_InlinedTTLIndex (12 ms)
[ RUN ] DBBlobBasicTest.GetBlob_IndexWithInvalidFileNumber
[ OK ] DBBlobBasicTest.GetBlob_IndexWithInvalidFileNumber (9 ms)
[ RUN ] DBBlobBasicTest.GenerateIOTracing
[ OK ] DBBlobBasicTest.GenerateIOTracing (11 ms)
[ RUN ] DBBlobBasicTest.BestEffortsRecovery_MissingNewestBlobFile
[ OK ] DBBlobBasicTest.BestEffortsRecovery_MissingNewestBlobFile (13 ms)
[ RUN ] DBBlobBasicTest.GetMergeBlobWithPut
[ OK ] DBBlobBasicTest.GetMergeBlobWithPut (11 ms)
[ RUN ] DBBlobBasicTest.MultiGetMergeBlobWithPut
[ OK ] DBBlobBasicTest.MultiGetMergeBlobWithPut (14 ms)
[ RUN ] DBBlobBasicTest.BlobDBProperties
[ OK ] DBBlobBasicTest.BlobDBProperties (21 ms)
[----------] 10 tests from DBBlobBasicTest (124 ms total)
[----------] 6 tests from DBBlobBasicTest/DBBlobBasicIOErrorTest
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/0
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/0 (12 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/1
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.GetBlob_IOError/1 (10 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/0
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/0 (10 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/1
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.MultiGetBlobs_IOError/1 (10 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/0
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/0 (1011 ms)
[ RUN ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/1
[ OK ] DBBlobBasicTest/DBBlobBasicIOErrorTest.CompactionFilterReadBlob_IOError/1 (1013 ms)
[----------] 6 tests from DBBlobBasicTest/DBBlobBasicIOErrorTest (2066 ms total)
[----------] Global test environment tear-down
[==========] 16 tests from 2 test cases ran. (2190 ms total)
[ PASSED ] 16 tests.
```
Reviewed By: ltamasi
Differential Revision: D30690849
Pulled By: Zhiyi-Zhang
fbshipit-source-id: a7567319487ad76bd1a2e24bf143afdbbd9e4346
Summary:
This PR does the following:
-> Makes the MemTableRepFactory into a Customizable class and creatable/configurable via CreateFromString
-> Makes the existing implementations compatible with configurations
-> Moves the "SpecialRepFactory" test class into testutil, accessible via the ObjectRegistry or a NewSpecial API
New tests were added to validate the functionality and all existing tests pass. db_bench and memtablerep_bench were hand-tested to verify the functionality in those tools.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8419
Reviewed By: zhichao-cao
Differential Revision: D29558961
Pulled By: mrambacher
fbshipit-source-id: 81b7229636e4e649a0c914e73ac7b0f8454c931c
Summary:
- Clarified some comments on compatibility for adding new ticker stats
- Added read I/O stats for `VerifyChecksum()` and `VerifyFileChecksums()` APIs
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8741
Test Plan: new unit test
Reviewed By: zhichao-cao
Differential Revision: D30708578
Pulled By: ajkr
fbshipit-source-id: d06b961f7e199ae92c266b683e39870aa8f63449
Summary:
* Consolidate use of std::regex for testing to testharness.cc, to
minimize Facebook linters constantly flagging uses in non-production
code.
* Improve syntax and error messages for asserting some string matches a
regex in tests.
* Add a public Regex wrapper class to encapsulate existing usage in
ObjectRegistry.
* Remove unnecessary include <regex>
* Put warnings that use of Regex in production code could cause bad
performance or stack overflow.
Intended follow-up work:
* Replace std::regex with another underlying implementation like RE2
* Improve ObjectRegistry interface in terms of possibly confusing literal
string matching vs. regex and in terms of reporting invalid regex.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8740
Test Plan:
tests updated, basic unit test for public Regex, and some manual
testing of temporary changes to see example error messages:
utilities/backupable/backupable_db_test.cc:917: Failure
000010_1162373755_138626.blob (child.name)
does not match regex
[0-9]+_[0-9]+_[0-9]+[.]blobHAHAHA (pattern)
db/db_basic_test.cc:74: Failure
R3SHSBA8C4U0CIMV2ZB0 (sid3)
does not match regex [0-9A-Z]{20}HAHAHA
Reviewed By: mrambacher
Differential Revision: D30706246
Pulled By: pdillinger
fbshipit-source-id: ba845e8f563ccad39bdb58f44f04e9da8f78c3fd
Summary:
Old typedef syntax is confusing
Most but not all changes with
perl -pi -e 's/typedef (.*) ([a-zA-Z0-9_]+);/using $2 = $1;/g' list_of_files
make format
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8751
Test Plan: existing
Reviewed By: zhichao-cao
Differential Revision: D30745277
Pulled By: pdillinger
fbshipit-source-id: 6f65f0631c3563382d43347896020413cc2366d9
Summary:
* FullKey and ParseFullKey appear to serve no purpose in the public API
(or anything else) so removed. Only use in one test updated.
* NumberToString serves no purpose vs. ToString so removed, numerous
calls updated
* Remove unnecessary forward declarations in metadata.h by re-arranging
class definitions.
* Remove some unneeded semicolons
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8736
Test Plan: existing tests
Reviewed By: mrambacher
Differential Revision: D30700039
Pulled By: pdillinger
fbshipit-source-id: 1e436a576f511a6ed8b4d97af7cc8216bc729af2
Summary:
Env::GenerateUniqueId() works fine on Windows and on POSIX
where /proc/sys/kernel/random/uuid exists. Our other implementation is
flawed and easily produces collision in a new multi-threaded test.
As we rely more heavily on DB session ID uniqueness, this becomes a
serious issue.
This change combines several individually suitable entropy sources
for reliable generation of random unique IDs, with goal of uniqueness
and portability, not cryptographic strength nor maximum speed.
Specifically:
* Moves code for getting UUIDs from the OS to port::GenerateRfcUuid
rather than in Env implementation details. Callers are now told whether
the operation fails or succeeds.
* Adds an internal API GenerateRawUniqueId for generating high-quality
128-bit unique identifiers, by combining entropy from three "tracks":
* Lots of info from default Env like time, process id, and hostname.
* std::random_device
* port::GenerateRfcUuid (when working)
* Built-in implementations of Env::GenerateUniqueId() will now always
produce an RFC 4122 UUID string, either from platform-specific API or
by converting the output of GenerateRawUniqueId.
DB session IDs now use GenerateRawUniqueId while DB IDs (not as
critical) try to use port::GenerateRfcUuid but fall back on
GenerateRawUniqueId with conversion to an RFC 4122 UUID.
GenerateRawUniqueId is declared and defined under env/ rather than util/
or even port/ because of the Env dependency.
Likely follow-up: enhance GenerateRawUniqueId to be faster after the
first call and to guarantee uniqueness within the lifetime of a single
process (imparting the same property onto DB session IDs).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8708
Test Plan:
A new mini-stress test in env_test checks the various public
and internal APIs for uniqueness, including each track of
GenerateRawUniqueId individually. We can't hope to verify anywhere close
to 128 bits of entropy, but it can at least detect flaws as bad as the
old code. Serial execution of the new tests takes about 350 ms on
my machine.
Reviewed By: zhichao-cao, mrambacher
Differential Revision: D30563780
Pulled By: pdillinger
fbshipit-source-id: de4c9ff4b2f581cf784fcedb5f39f16e5185c364
Summary:
Introduce a new function to save sst files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8706
Reviewed By: jay-zhuang
Differential Revision: D30544242
Pulled By: riversand963
fbshipit-source-id: 554755852daff7ae1c7864b0029f51b27099ee09
Summary:
DumpStats() iterates through the ColumnFamilySet. There is a potential
race condition because it does Ref the cfd, and the cfd could get
destroyed during the iteration.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8714
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D30580199
Pulled By: anand1976
fbshipit-source-id: 60a3443ad0d4f7ac6a977dec780e6d2c1b70b850
Summary:
Recent refactor of `ReactiveVersionSet::ReadAndApply()` uses
`ManifestTailer` whose `Iterate()` method can cause the db's
`last_sequence_` to go backward. Consequently, read requests can see
out-dated data. For example, latest changes to the primary will not be
seen on the secondary even after a `TryCatchUpWithPrimary()` if no new
write batches are read from the WALs and no new MANIFEST entries are
read from the MANIFEST.
Fix the bug so that `VersionEditHandler::CheckIterationResult` will
never decrease `last_sequence_`, `last_allocated_sequence_` and
`last_published_sequence_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8653
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D30272084
Pulled By: riversand963
fbshipit-source-id: c6a49c534b2509b93ef62d8936ed0acd5b860eaa
Summary:
Useful in some places for object uniqueness across processes.
Currently used for generating a host-wide identifier of Cache objects
but expected to be used soon in some unique id generation code.
`int64_t` is chosen for return type because POSIX uses signed integer type,
usually `int`, for `pid_t` and Windows uses `DWORD`, which is `uint32_t`.
Future work: avoid copy-pasted declarations in port_*.h, perhaps with
port_common.h always included from port.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8693
Test Plan: manual for now
Reviewed By: ajkr, anand1976
Differential Revision: D30492876
Pulled By: pdillinger
fbshipit-source-id: 39fc2788623cc9f4787866bdb67a4d183dde7eef
Summary:
The `JobContext::job_snapshot` referenced DB state but could
have been deleted by a BG thread after the signal/unlock allowing
shutdown to proceed. Then we would see an error like this (valgrind):
```
==354104== Thread 2:
==354104== Invalid read of size 8
==354104== at 0x694C4D: rocksdb::ManagedSnapshot::~ManagedSnapshot() (snapshot_impl.cc:20)
==354104== by 0x58F5BA: operator() (unique_ptr.h:81)
==354104== by 0x58F5BA: operator() (unique_ptr.h:75)
==354104== by 0x58F5BA: ~unique_ptr (unique_ptr.h:292)
==354104== by 0x58F5BA: rocksdb::JobContext::~JobContext() (job_context.h:221)
==354104== by 0x5F155E: rocksdb::DBImpl::BackgroundCallCompaction(rocksdb::DBImpl::PrepickedCompaction*, rocksdb::Env::Priority) (db_impl_compaction_flush.cc:2696)
==354104== by 0x5F1BC2: rocksdb::DBImpl::BGWorkCompaction(void*) (db_impl_compaction_flush.cc:2468)
==354104== by 0x83707A: operator() (std_function.h:688)
==354104== by 0x83707A: rocksdb::ThreadPoolImpl::Impl::BGThread(unsigned long) (threadpool_imp.cc:266)
==354104== by 0x8373ED: rocksdb::ThreadPoolImpl::Impl::BGThreadWrapper(void*) (threadpool_imp.cc:307)
==354104== by 0x492A800: execute_native_thread_routine (in /usr/local/fbcode/platform009/lib/libstdc++.so.6.0.28)
==354104== by 0x4A5020B: start_thread (in /usr/local/fbcode/platform009/lib/libpthread-2.30.so)
==354104== by 0x4CF281E: clone (in /usr/local/fbcode/platform009/lib/libc-2.30.so)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8696
Test Plan: unable to repro
Reviewed By: pdillinger
Differential Revision: D30505277
Pulled By: ajkr
fbshipit-source-id: 5a99f34137cd14d06b0f624add6d37a70a61135d
Summary:
Currently, we only provide job_id in RemoteCompaction APIs, the
main problem of `job_id` is it cannot uniquely identify a compaction job
between DB instances or between sessions.
Providing DB and session id to the user, which will make building cross
DB compaction service easier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8680
Test Plan: unittest
Reviewed By: ajkr
Differential Revision: D30444859
Pulled By: jay-zhuang
fbshipit-source-id: fdf107f4286564049637f154193c6d94c3c59448
Summary:
I very recently realized that with https://github.com/facebook/rocksdb/issues/8669 we cannot later add
file numbers to external SST files (so that more can share db session
ids for better uniqueness properties), because of forward compatibility.
We would have a version of RocksDB that assumes session IDs are unique
on external SST files and therefore can't really break that invariant in
future files.
This change adds a table property for "orig_file_number" which is
populated by normal SST files and also external SST files generated by
SstFileWriter. SstFileWriter now keeps a db_session_id for life of the
object and increments its own file numbers for embedding in table
properties. (They are arguably "fake" file numbers because these numbers
and not embedded in the file name.)
While updating block_based_table_builder, I removed several unnecessary
fields from Rep, because following the pattern would have created
another unnecessary field.
This change also updates block_based_table_reader to use this new
property when available, which means that for newer SST files, we can
determine the stable/original <db_session_id,file_number> unique
identifier using just the file contents, not the file name. (It's a bit
complicated; detailed comments in block_based_table_reader.)
Also added DB host id to properties listing by sst_dump, which could be
useful in debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8686
Test Plan: majorly overhauled StableCacheKeys test for this change
Reviewed By: zhichao-cao
Differential Revision: D30457742
Pulled By: pdillinger
fbshipit-source-id: 2e5ae7dddeb94fb9d8eac8a928486aed8b8cd445
Summary:
This is essentially resurrection and fixing of the part of
https://github.com/facebook/rocksdb/issues/8198 that was reverted in https://github.com/facebook/rocksdb/issues/8212, using data added in https://github.com/facebook/rocksdb/issues/8246. Basically,
when configuring Ribbon filter, you can specify an LSM level before which
Bloom will be used instead of Ribbon. But Bloom is only considered for
Leveled and Universal compaction styles and file going into a known LSM
level. This way, SST file writer, FIFO compaction, etc. use Ribbon filter as
you would expect with NewRibbonFilterPolicy.
So that this can be controlled with a single int value and so that flushes
can be distinguished from intra-L0, we consider flush to go to level -1 for
the purposes of this option. (Explained in API comment.)
I also expect the most common and recommended Ribbon configuration to
use Bloom during flush, to minimize slowing down writes and because according
to my estimates, Ribbon only pays off if the structure lives in memory for
more than an hour. Thus, I have changed the default for NewRibbonFilterPolicy
to be this mild hybrid configuration. I don't really want to add something like
NewHybridFilterPolicy because at least the mild hybrid configuration (Bloom for
flush, Ribbon otherwise) should be considered a natural choice.
C APIs also updated, but because they don't support overloading,
rocksdb_filterpolicy_create_ribbon is kept pure ribbon for clarity and
rocksdb_filterpolicy_create_ribbon_hybrid must be called for a hybrid
configuration. While touching C API, I changed bits per key options from
int to double.
BuiltinFilterPolicy is needed so that LevelThresholdFilterPolicy doesn't inherit
unused fields from BloomFilterPolicy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8679
Test Plan: new + updated tests, including crash test
Reviewed By: jay-zhuang
Differential Revision: D30445797
Pulled By: pdillinger
fbshipit-source-id: 6f5aeddfd6d79f7e55493b563c2d1d2d568892e1
Summary:
- Allow to get `Valid()`, `status()`, `key()` and `value()` of an iterator from `IteratorTraceExecutionResult`.
- Move lower bound and upper bound from `IteratorSeekQueryTraceRecord` to `IteratorQueryTraceRecord`.
Added test in `DBTest2.TraceAndReplay`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8687
Reviewed By: zhichao-cao
Differential Revision: D30457630
Pulled By: autopear
fbshipit-source-id: be433099a25895b3aa6f0c00f95ad7b1d7489c1d
Summary:
Pass BlobFileCompletionCallback in case of atomic flush and
compaction job which is currently nullptr(default parameter).
BlobFileCompletionCallback is used in case of IntegratedBlobDB to report new blob files to
SstFileManager.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8681
Test Plan: CircleCI jobs
Reviewed By: ltamasi
Differential Revision: D30445998
Pulled By: akankshamahajan15
fbshipit-source-id: ba48093843864faec57f1f365cce7b5a569c4021
Summary:
Trace file V2 added lower/upper bounds to `Iterator::Seek()` and `Iterator::SeekForPrev()`. They were not used anywhere during the execution of a `TraceRecord`. Now they are added to be used by `ReadOptions` during `Iterator::Seek()` and `Iterator::SeekForPrev()` if they are set.
Added test cases in `DBTest2.TraceAndManualReplay`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8677
Reviewed By: zhichao-cao
Differential Revision: D30438255
Pulled By: autopear
fbshipit-source-id: 82563006be0b69155990e506a74951c18af8d288
Summary:
Previously, when a `FlushJob` was redirected to a MemPurge, the function `DBImpl::NotifyOnFlushComplete` was called, which created a series of issues because the JobInfo was not correctly collected from the memtables.
This diff aims at correcting these two issues (`FlushJobInfo` collection in `FlushJob::MemPurge` , no call to `DBImpl::NotifyOnFlushComplete` after successful mempurge).
Event listeners were added to the unit tests to handle these situations.
Surprisingly none of the crashtests caught this issue, I will try to add event listeners to crash tests in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8672
Reviewed By: akankshamahajan15
Differential Revision: D30383109
Pulled By: bjlemaire
fbshipit-source-id: 35a8d4295886923ee4049a6447f00022cb221c73
Summary:
`Replayer::Execute()` can directly returns the result (e.g, request latency, DB::Get() return code, returned value, etc.)
`Replayer::Replay()` reports the results via a callback function.
New interface:
`TraceRecordResult` in "rocksdb/trace_record_result.h".
`DBTest2.TraceAndReplay` and `DBTest2.TraceAndManualReplay` are updated accordingly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8657
Reviewed By: ajkr
Differential Revision: D30290216
Pulled By: autopear
fbshipit-source-id: 3c8d4e6b180ec743de1a9d9dcaee86064c74f0d6
Summary:
Extends https://github.com/facebook/rocksdb/issues/8659 to work for ingested external SST files, even
the same file ingested into different DBs sharing a block cache.
Note: These new cache keys are currently only enabled when FileSystem
does not provide GetUniqueId. For now, they are typically larger,
so slightly less efficient.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8669
Test Plan: Extended unit test
Reviewed By: zhichao-cao
Differential Revision: D30398532
Pulled By: pdillinger
fbshipit-source-id: 1f13e2af4b8bfff5741953a69466e9589fbc23c7
Summary:
In debug mode, we are seeing assertion failure as follows
```
db/compaction/compaction_iterator.cc:980: void rocksdb::CompactionIterator::PrepareOutput(): \
Assertion `ikey_.type != kTypeDeletion && ikey_.type != kTypeSingleDeletion' failed.
```
It is caused by releasing earliest snapshot during compaction between the execution of
`NextFromInput()` and `PrepareOutput()`.
In one case, as demonstrated in unit test `WritePreparedTransaction.ReleaseEarliestSnapshotDuringCompaction_WithSD2`,
incorrect result may be returned by a following range scan if we disable assertion, as in opt compilation
level: the SingleDelete marker's sequence number is zeroed out, but the preceding PUT is also
outputted to the SST file after compaction. Due to the logic of DBIter, the PUT will not be
skipped and will be returned by iterator in range scan. https://github.com/facebook/rocksdb/issues/8661 illustrates what happened.
Fix by taking a more conservative approach: make compaction zero out sequence number only
if key is in the earliest snapshot when the compaction starts.
Another assertion failure is
```
Assertion `current_user_key_snapshot_ == last_snapshot' failed.
```
It's caused by releasing the snapshot between the PUT and SingleDelete during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8608
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D30145645
Pulled By: riversand963
fbshipit-source-id: 699f58e66faf70732ad53810ccef43935d3bbe81
Summary:
The patch adds statistics support to the integrated BlobDB implementation,
namely the tickers `BLOB_DB_BLOB_FILE_BYTES_READ` and
`BLOB_DB_GC_{NUM_KEYS,BYTES}_RELOCATED`, and the histograms
`BLOB_DB_(DE)COMPRESSION_MICROS`. (Some other statistics, like
`BLOB_DB_BLOB_FILE_BYTES_WRITTEN`, `BLOB_DB_BLOB_FILE_SYNCED`,
`BLOB_DB_BLOB_FILE_{READ,WRITE,SYNC}_MICROS` were already supported.)
Note that the vast majority of the old BlobDB's tickers/histograms are not
really applicable to the new implementation, since they e.g. pertain to calling
dedicated BlobDB APIs (which the integrated BlobDB does not have) or are
tied to the legacy BlobDB's design of writing blob files synchronously when
a write API is called. Such statistics are marked "legacy BlobDB only" in
`statistics.h`.
Fixes https://github.com/facebook/rocksdb/issues/8645 .
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8667
Test Plan: Ran `make check` and tested the new statistics using `db_bench`.
Reviewed By: riversand963
Differential Revision: D30356884
Pulled By: ltamasi
fbshipit-source-id: 5f8a833faee60401c5643c2f0a6c0415488190a4
Summary:
Use DB session ids in SST table properties to make cache keys
stable across DB re-open and copy / move / restore / etc.
These new cache keys are currently only enabled when FileSystem does not
provide GetUniqueId. For now, they are typically larger, so slightly
less efficient.
Relevant to https://github.com/facebook/rocksdb/issues/7405
This change has a minor regression in PersistentCache functionality:
metaindex blocks are no longer cached in PersistentCache. Table properties
blocks already were not but ideally should be. I didn't spent effort to
fix & test these issues because we don't believe PersistentCache is used much
if at all and expect SecondaryCache to replace it. (Though PRs are welcome.)
FIXME: there is more to be fixed for stable cache keys on external SST files
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8659
Test Plan:
new unit test added, which fails when disabling new
functionality
Reviewed By: zhichao-cao
Differential Revision: D30297705
Pulled By: pdillinger
fbshipit-source-id: e8539a5c8802a79340405629870f2e3fb3822d3a
Summary:
Previously, the `MemPurge` sampling function was assessing whether a random entry from a memtable was garbage or not by simply querying the given memtable (see https://github.com/facebook/rocksdb/issues/8628 for more details).
In this diff, I am updating the sampling function by querying not only the memtable the entry was drawn from, but also all subsequent memtables that have a greater memtable ID.
I also added the size of the value for KV entries in the payload/useful payload estimates (which was also one of the reasons why sampling was not as good as mempurging all the time in terms of L0 SST files reduction).
Once these changes were made, I was able to clean obsolete objects and functions from the `MemtableList` struct, and did a bit of cleanup everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8656
Reviewed By: pdillinger
Differential Revision: D30288583
Pulled By: bjlemaire
fbshipit-source-id: 7646a545ec56f4715949daa59ab5eee74540feb3
Summary:
New public interfaces:
`TraceRecord` and `TraceRecord::Handler`, available in "rocksdb/trace_record.h".
`Replayer`, available in `rocksdb/utilities/replayer.h`.
User can use `DB::NewDefaultReplayer()` to create a Replayer to auto/manual replay a trace file.
Unit tests:
- `./db_test2 --gtest_filter="DBTest2.TraceAndReplay"`: Updated with the internal API changes.
- `./db_test2 --gtest_filter="DBTest2.TraceAndManualReplay"`: New for manual replay.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8611
Reviewed By: ajkr
Differential Revision: D30266329
Pulled By: autopear
fbshipit-source-id: 1ecb3cbbedae0f6a67c18f0cc82e002b4d81b6f8
Summary:
Changes the API of the MemPurge process: the `bool experimental_allow_mempurge` and `experimental_mempurge_policy` flags have been replaced by a `double experimental_mempurge_threshold` option.
This change of API reflects another major change introduced in this PR: the MemPurgeDecider() function now works by sampling the memtables being flushed to estimate the overall amount of useful payload (payload minus the garbage), and then compare this useful payload estimate with the `double experimental_mempurge_threshold` value.
Therefore, when the value of this flag is `0.0` (default value), mempurge is simply deactivated. On the other hand, a value of `DBL_MAX` would be equivalent to always going through a mempurge regardless of the garbage ratio estimate.
At the moment, a `double experimental_mempurge_threshold` value else than 0.0 or `DBL_MAX` is opnly supported`with the `SkipList` memtable representation.
Regarding the sampling, this PR includes the introduction of a `MemTable::UniqueRandomSample` function that collects (approximately) random entries from the memtable by using the new `SkipList::Iterator::RandomSeek()` under the hood, or by iterating through each memtable entry, depending on the target sample size and the total number of entries.
The unit tests have been readapted to support this new API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8628
Reviewed By: pdillinger
Differential Revision: D30149315
Pulled By: bjlemaire
fbshipit-source-id: 1feef5390c95db6f4480ab4434716533d3947f27
Summary:
The patch attempts to deflake `DBTestXactLogIterator.TransactionLogIteratorCorruptedLog`
by disabling file deletions while retrieving the list of WAL files and truncating the first WAL file.
This is to prevent the `PurgeObsoleteFiles` call triggered by `GetSortedWalFiles` from
invalidating the result of `GetSortedWalFiles`. The patch also cleans up the test case a bit
and changes it to using `test::TruncateFile` instead of calling the `truncate` syscall directly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8627
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D30147002
Pulled By: ltamasi
fbshipit-source-id: db11072a4ad8900a2f859cb5294e22b1888c23f6
Summary:
Some FIFO users want to keep the data for longer, but the old data is rarely accessed. This feature allows users to configure FIFO compaction so that data older than a threshold is moved to a warm storage tier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8310
Test Plan: Add several unit tests.
Reviewed By: ajkr
Differential Revision: D28493792
fbshipit-source-id: c14824ea634814dee5278b449ab5c98b6e0b5501
Summary:
`CompareKeyContext::operator()` on the trunk has a bug: when comparing
column family IDs, `lhs` is used for both sides of the comparison. This
results in the `KeyContext`s getting sorted solely based on key, which
in turn means that keys with the same column family do not necessarily
form a single range in the sorted list. This violates an assumption of the
batched `MultiGet` logic, leading to the same column family
showing up multiple times in the list of `MultiGetColumnFamilyData`.
The end result is the code attempting to check out the thread-local
`SuperVersion` for the same CF multiple times, causing an
assertion violation in debug builds and memory corruption/crash in
release builds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8633
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D30169182
Pulled By: ltamasi
fbshipit-source-id: a47710652df7e95b14b40fb710924c11a8478023
Summary:
- Changed MergeOperator, CompactionFilter, and CompactionFilterFactory into Customizable classes.
- Added Options/Configurable/Object Registration for TTL and Cassandra variants
- Changed the StringAppend MergeOperators to accept a string delimiter rather than a simple char. Made the delimiter into a configurable option
- Added tests for new functionality
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8481
Reviewed By: zhichao-cao
Differential Revision: D30136050
Pulled By: mrambacher
fbshipit-source-id: 271d1772835935b6773abaf018ee71e42f9491af
Summary:
We've been seeing occasional crashes on CI while inserting into the
vectors in `ObsoleteFilesTest.DeleteObsoleteOptionsFile`. The crashes
don't reproduce locally (could be either a race or an object lifecycle
issue) but the good news is that the vectors in question are not really
used for anything meaningful by the test. (The assertion about the sizes
of the two vectors being equal is guaranteed to hold, since the two sync
points where they are populated are right after each other.) The patch
simply removes the vectors from the test, alongside the associated
callbacks and sync points.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8624
Test Plan: `make check`
Reviewed By: akankshamahajan15
Differential Revision: D30118485
Pulled By: ltamasi
fbshipit-source-id: 0a4c3d06584e84cd2b1dcc212d274fa1b89cb647
Summary:
Previously we attempted to rename "LOG" to "LOG.old.*" without checking
its existence first. "LOG" had no reason to exist in a new DB.
Errors in renaming a non-existent "LOG" were swallowed via
`PermitUncheckedError()` so things worked. However the storage service's
error monitoring was detecting all these benign rename failures. So it
is better to fix it. Also with this PR we can now distinguish rename failure
for other reasons and return them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8622
Test Plan: new unit test
Reviewed By: akankshamahajan15
Differential Revision: D30115189
Pulled By: ajkr
fbshipit-source-id: e2f337ffb2bd171be0203172abc8e16e7809b170
Summary:
PR https://github.com/facebook/rocksdb/issues/5908 added `flush_jobs_info_` to `FlushJob` to make sure
`OnFlushCompleted()` is called after committing flush results to
MANIFEST. However, `flush_jobs_info_` is not updated in atomic
flush, causing `NotifyOnFlushCompleted()` to skip `OnFlushCompleted()`.
This PR fixes this, in a similar way to https://github.com/facebook/rocksdb/issues/5908 that handles regular flush.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8585
Test Plan: make check
Reviewed By: jay-zhuang
Differential Revision: D29913720
Pulled By: riversand963
fbshipit-source-id: 4ff023c98372fa2c93188d4a5c8a4e9ffa0f4dda
Summary:
Insert warm blocks (data, uncompressed dict, index and filter blocks) during flush in Block cache which is enabled under option BlockBasedTableOptions.prepopulate_block_cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8561
Test Plan: Added unit test
Reviewed By: anand1976
Differential Revision: D29773411
Pulled By: akankshamahajan15
fbshipit-source-id: 6631123c10134340ef0bd7e90baafaa6deba0e66
