Summary:
While the instruction of installing "make format" dependencies works on some platforms, it is hard to use for some others. Improve it a little bit.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6162
Test Plan: Run "make format" on an envrionment missing the dependencies and see the instructions printed out
Differential Revision: D18970773
fbshipit-source-id: fd21b31053407cc171a6675f781a556a1c3e8945
Summary:
Right now, PosixRandomAccessFile::MultiRead() executes read requests in parallel. In this PR, it leverages I/O Uring library to run it in parallel, even when page cache is enabled. This function will fall back if the kernel version doesn't support it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5881
Test Plan: Run the unit test on a kernel version supporting it and make sure all tests pass, and run a unit test on kernel version supporting it and see it pass. Before merging, will also run stress test and see it passes.
Differential Revision: D17742266
fbshipit-source-id: e05699c925ac04fdb42379456a4e23e4ebcb803a
Summary:
Adds an improved, replacement Bloom filter implementation (FastLocalBloom) for full and partitioned filters in the block-based table. This replacement is faster and more accurate, especially for high bits per key or millions of keys in a single filter.
Speed
The improved speed, at least on recent x86_64, comes from
* Using fastrange instead of modulo (%)
* Using our new hash function (XXH3 preview, added in a previous commit), which is much faster for large keys and only *slightly* slower on keys around 12 bytes if hashing the same size many thousands of times in a row.
* Optimizing the Bloom filter queries with AVX2 SIMD operations. (Added AVX2 to the USE_SSE=1 build.) Careful design was required to support (a) SIMD-optimized queries, (b) compatible non-SIMD code that's simple and efficient, (c) flexible choice of number of probes, and (d) essentially maximized accuracy for a cache-local Bloom filter. Probes are made eight at a time, so any number of probes up to 8 is the same speed, then up to 16, etc.
* Prefetching cache lines when building the filter. Although this optimization could be applied to the old structure as well, it seems to balance out the small added cost of accumulating 64 bit hashes for adding to the filter rather than 32 bit hashes.
Here's nominal speed data from filter_bench (200MB in filters, about 10k keys each, 10 bits filter data / key, 6 probes, avg key size 24 bytes, includes hashing time) on Skylake DE (relatively low clock speed):
$ ./filter_bench -quick -impl=2 -net_includes_hashing # New Bloom filter
Build avg ns/key: 47.7135
Mixed inside/outside queries...
Single filter net ns/op: 26.2825
Random filter net ns/op: 150.459
Average FP rate %: 0.954651
$ ./filter_bench -quick -impl=0 -net_includes_hashing # Old Bloom filter
Build avg ns/key: 47.2245
Mixed inside/outside queries...
Single filter net ns/op: 63.2978
Random filter net ns/op: 188.038
Average FP rate %: 1.13823
Similar build time but dramatically faster query times on hot data (63 ns to 26 ns), and somewhat faster on stale data (188 ns to 150 ns). Performance differences on batched and skewed query loads are between these extremes as expected.
The only other interesting thing about speed is "inside" (query key was added to filter) vs. "outside" (query key was not added to filter) query times. The non-SIMD implementations are substantially slower when most queries are "outside" vs. "inside". This goes against what one might expect or would have observed years ago, as "outside" queries only need about two probes on average, due to short-circuiting, while "inside" always have num_probes (say 6). The problem is probably the nastily unpredictable branch. The SIMD implementation has few branches (very predictable) and has pretty consistent running time regardless of query outcome.
Accuracy
The generally improved accuracy (re: Issue https://github.com/facebook/rocksdb/issues/5857) comes from a better design for probing indices
within a cache line (re: Issue https://github.com/facebook/rocksdb/issues/4120) and improved accuracy for millions of keys in a single filter from using a 64-bit hash function (XXH3p). Design details in code comments.
Accuracy data (generalizes, except old impl gets worse with millions of keys):
Memory bits per key: FP rate percent old impl -> FP rate percent new impl
6: 5.70953 -> 5.69888
8: 2.45766 -> 2.29709
10: 1.13977 -> 0.959254
12: 0.662498 -> 0.411593
16: 0.353023 -> 0.0873754
24: 0.261552 -> 0.0060971
50: 0.225453 -> ~0.00003 (less than 1 in a million queries are FP)
Fixes https://github.com/facebook/rocksdb/issues/5857
Fixes https://github.com/facebook/rocksdb/issues/4120
Unlike the old implementation, this implementation has a fixed cache line size (64 bytes). At 10 bits per key, the accuracy of this new implementation is very close to the old implementation with 128-byte cache line size. If there's sufficient demand, this implementation could be generalized.
Compatibility
Although old releases would see the new structure as corrupt filter data and read the table as if there's no filter, we've decided only to enable the new Bloom filter with new format_version=5. This provides a smooth path for automatic adoption over time, with an option for early opt-in.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6007
Test Plan: filter_bench has been used thoroughly to validate speed, accuracy, and correctness. Unit tests have been carefully updated to exercise new and old implementations, as well as the logic to select an implementation based on context (format_version).
Differential Revision: D18294749
Pulled By: pdillinger
fbshipit-source-id: d44c9db3696e4d0a17caaec47075b7755c262c5f
Summary:
- Updated our included xxhash implementation to version 0.7.2 (== the latest dev version as of 2019-10-09).
- Using XXH_NAMESPACE (like other fb projects) to avoid potential name collisions.
- Added fastrange64, and unit tests for it and fastrange32. These are faster alternatives to hash % range.
- Use preview version of XXH3 instead of MurmurHash64A for NPHash64
-- Had to update cache_test to increase probability of passing for any given hash function.
- Use fastrange64 instead of % with uses of NPHash64
-- Had to fix WritePreparedTransactionTest.CommitOfDelayedPrepared to avoid deadlock apparently caused by new hash collision.
- Set default seed for NPHash64 because specifying a seed rarely makes sense for it.
- Removed unnecessary include xxhash.h in a popular .h file
- Rename preview version of XXH3 to XXH3p for clarity and to ease backward compatibility in case final version of XXH3 is integrated.
Relying on existing unit tests for NPHash64-related changes. Each new implementation of fastrange64 passed unit tests when manipulating my local build to select it. I haven't done any integration performance tests, but I consider the improved performance of the pieces being swapped in to be well established.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5909
Differential Revision: D18125196
Pulled By: pdillinger
fbshipit-source-id: f6bf83d49d20cbb2549926adf454fd035f0ecc0d
Summary:
Some dependency path is not correct so that ASAN cannot run with CLANG. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5946
Test Plan: Run ASAN with CLANG
Differential Revision: D18040933
fbshipit-source-id: 1d82be9d350485cf1df1c792dad765188958641f
Summary:
format-diff.sh, a.k.a. 'make format', would use 'master'
to decide which commits are probably unpublished. Much better to use
facebook remote master since local master may not be caught up and may
have its own unpublished commits. Script now tries to compare against
facebook remote master branch (branch pointer is updated with any fetch
or pull), because those differences are what would be considered the
differences for a pull request.
Also, script would compare against *parent* of merge-base with that
reference point, which is just wrong since that includes the last
published commit.
In case of problems, you can now customize the reference point, by
setting the FORMAT_UPSTREAM variable.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5831
Test Plan: manual
Differential Revision: D17528462
Pulled By: pdillinger
fbshipit-source-id: 50fdb8795d683bf3c14d449669c1a5299e0dfa8b
Summary:
Update version of dependencies.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5777
Test Plan: make release
Differential Revision: D17269421
fbshipit-source-id: e76dbe5389e1d7f811739d3bc1e404b482dfce34
Summary:
In preparing to utilize a new Intel instruction extension, I
noticed problems with the existing build script in regard to the
existing utilized extensions, either with USE_SSE or PORTABLE flags.
* PORTABLE=0 was interpreted the same as PORTABLE=1. Now empty and 0
mean the same. (I guess you were not supposed to set PORTABLE= if you
wanted non-portable--except that...)
* The Facebook build script extensions would set PORTABLE=1 even if
it's already set in a make var or environment. Now it does not override
a non-empty setting, so use PORTABLE=0 for fully optimized build,
overriding Facebook environment default.
* Put in an explanation of the USE_SSE flag where it's used by
build_detect_platform, and cleaned up some confusing/redundant
associated logic.
* If USE_SSE was set and expected intrinsics were not available,
build_detect_platform would exit early but build would proceed with
broken, incomplete configuration. Now warning is gracefully recovered.
* If USE_SSE was set and expected intrinsics were not available,
build would still try to use flags like -msse4.2 etc. which could lead
to unexpected compilation failure or binary incompatibility. Now those
flags are not used if the warning is issued.
This should not break or change existing, valid build scripts.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5800
Test Plan: manual case testing
Differential Revision: D17369543
Pulled By: pdillinger
fbshipit-source-id: 4ee244911680ae71144d272c40aceea548e3ce88
Summary:
This ports `folly::DistributedMutex` into RocksDB. The PR includes everything else needed to compile and use DistributedMutex as a component within folly. Most files are unchanged except for some portability stuff and includes.
For now, I've put this under `rocksdb/third-party`, but if there is a better folder to put this under, let me know. I also am not sure how or where to put unit tests for third-party stuff like this. It seems like gtest is included already, but I need to link with it from another third-party folder.
This also includes some other common components from folly
- folly/Optional
- folly/ScopeGuard (In particular `SCOPE_EXIT`)
- folly/synchronization/ParkingLot (A portable futex-like interface)
- folly/synchronization/AtomicNotification (The standard C++ interface for futexes)
- folly/Indestructible (For singletons that don't get destroyed without allocations)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5642
Differential Revision: D16544439
fbshipit-source-id: 179b98b5dcddc3075926d31a30f92fd064245731
Summary:
Add an extra cleanup step so that db directory can be saved and uploaded.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5554
Reviewed By: yancouto
Differential Revision: D16168844
Pulled By: riversand963
fbshipit-source-id: ec7b2cee5f11c7d388c36531f8b076d648e2fb19
Summary:
This property is needed to run the child jobs on the same host and thus propagate the child job status back to the parent's.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5456
Reviewed By: yancouto
Differential Revision: D15824382
Pulled By: maysamyabandeh
fbshipit-source-id: 42f2efbedaa3a8b399281105f0ce793c1c9a6191
Summary:
Special characters like slashes and parentheses are not supported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5424
Differential Revision: D15708067
Pulled By: ltamasi
fbshipit-source-id: 90527ec3ee882a0cdd1249c3946f5eff2ff7c115
Summary:
This change adds a Dynamic Library class to the RocksDB Env. Dynamic libraries are populated via the Env::LoadLibrary method.
The addition of dynamic library support allows for a few different features to be developed:
1. The compression code can be changed to use dynamic library support. This would allow RocksDB to determine at run-time what compression packages were installed. This change would eliminate the need to make sure the build-time and run-time environment had the same library set. It would also simplify some of the Java build issues (where it attempts to build and include various packages inside the RocksDB jars).
2. Along with other features (to be provided in a subsequent PR), this change would allow code/configurations to be added to RocksDB at run-time. For example, the build system includes code for building an "rados" environment and adding "Cassandra" features. Instead of these extensions being built into the base RocksDB code, these extensions could be loaded at run-time as required/appropriate, either by configuration or explicitly.
We intend to push out other changes in support of the extending RocksDB at run-time via configurations.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5281
Differential Revision: D15447613
Pulled By: riversand963
fbshipit-source-id: 452cd4f54511c0bceee18f6d9d919aae9fd25fef
Summary:
Fix some hdfs-related code so that it can compile and run 'db_stress'
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5122
Differential Revision: D14675495
Pulled By: riversand963
fbshipit-source-id: cac280479efcf5451982558947eac1732e8bc45a
Summary:
The compiler flag `-DROCKSDB_FALLOCATE_PRESENT` was only set when
`fallocate`, `FALLOC_FL_KEEP_SIZE`, and `FALLOC_FL_PUNCH_HOLE` were all
present. However, the last of the three is not really necessary for the
primary `fallocate` use case; furthermore, it was introduced only in later
Linux kernel versions (2.6.38+).
This PR changes the flag `-DROCKSDB_FALLOCATE_PRESENT` to only require
`fallocate` and `FALLOC_FL_KEEP_SIZE` to be present. There is a separate
check for `FALLOC_FL_PUNCH_HOLE` only in the place where it is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5023
Differential Revision: D14248487
Pulled By: siying
fbshipit-source-id: a10ed0b902fa755988e957bd2dcec9081ec0502e
Summary:
Currently crash test covers cases with and without atomic flush, but takes too
long to finish. Therefore it may be a better idea to put crash test with atomic
flush in a separate set of tests.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4945
Differential Revision: D13947548
Pulled By: riversand963
fbshipit-source-id: 177c6de865290fd650b0103408339eaa3f801d8c
Summary:
We should strip `-DZSTD` to prevent ZSTD from being used in the no compression tests, similarly to how we prevent all other compression libraries from being used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4982
Differential Revision: D14075349
Pulled By: ajkr
fbshipit-source-id: 8bd861516cf28a568c2b701ad33d0bb658db93b2
Summary:
- When building with internal dependencies, specify this toolchain by setting `ROCKSDB_FBCODE_BUILD_WITH_PLATFORM007=1`
- It is not enabled by default. However, it is enabled for TSAN builds in CI since there is a known problem with TSAN in gcc-5: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71090
- I did not add support for Lua since (1) we agreed to deprecate it, and (2) we only have an internal build for v5.3 with this toolchain while that has breaking changes compared to our current version (v5.2).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4923
Differential Revision: D13827226
Pulled By: ajkr
fbshipit-source-id: 9aa3388ed3679777cfb15ef8cbcb83c07f62f947
Summary:
- If block cache disabled or not used for meta-blocks, `BlockBasedTableReader::Rep::uncompression_dict` owns the `UncompressionDict`. It is preloaded during `PrefetchIndexAndFilterBlocks`.
- If block cache is enabled and used for meta-blocks, block cache owns the `UncompressionDict`, which holds dictionary and digested dictionary when needed. It is never prefetched though there is a TODO for this in the code. The cache key is simply the compression dictionary block handle.
- New stats for compression dictionary accesses in block cache: "BLOCK_CACHE_COMPRESSION_DICT_*" and "compression_dict_block_read_count"
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4881
Differential Revision: D13663801
Pulled By: ajkr
fbshipit-source-id: bdcc54044e180855cdcc57639b493b0e016c9a3f
Summary:
Found a callsite for `moo_translate` in the Scuba warnings and realized we have a few calls to `define()` left in fbcode.
- I ran the `DefineCodemod` script against fbcode
- Fixed broken tests, and ensured that tests that are explicitly testing the behaviour of `define()` were not changed.
bypass-lint
Reviewed By: kmeht
Differential Revision: D12968447
fbshipit-source-id: d8fd3649a2ce9868b8938d293e1bebf1a6d2fad8
Summary:
In fbcode when we build with clang7++, although -faligned-new is available in compile phase, we link with an older version of libstdc++.a and it doesn't come with aligned-new support (e.g. `nm libstdc++.a | grep align_val_t` return empty). In this case the previous -faligned-new detection can pass but will end up with link error. Fixing it by only have the detection for non-fbcode build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4576
Differential Revision: D10500008
Pulled By: yiwu-arbug
fbshipit-source-id: b375de4fbb61d2a08e54ab709441aa8e7b4b08cf
Summary:
I noticed we were building against zstd 1.3.0 which is missing optimizations that our fbcode customers have (they're on zstd 1.3.5). Ran `./build_tools/update_dependencies.sh` to catch us up. Omitted the changes it made for gcc-4.8 since it's broken.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4244
Differential Revision: D9230111
Pulled By: ajkr
fbshipit-source-id: 3e8ec1d8a961f98ec77c8c6580bde4caacf2d437
Summary:
The error_filter.py script parses the output of the "Build and run" stage of continuous tests to check for errors. It is currently only detecting compile errors and not link errors. This change fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4247
Differential Revision: D9233735
Pulled By: anand1976
fbshipit-source-id: 16e5a04950891cd9aba5cb3efcb6abc2a2e0d5ae
Summary:
TSAN requires the code is built with -fPIC. This PR links against a libzstd built with -fPIC when necessary, which enables ZSTD compression to be used in TSAN builds.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4249
Differential Revision: D9244746
Pulled By: ajkr
fbshipit-source-id: 8c6a8fadd6c8643b2077afcbc3626779e1d73b63
Summary:
Fix the nested quotes for CRASH_TEST_EXT_ARGS, as the generated json could not be parsed by the sandcastle job.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4243
Differential Revision: D9228429
Pulled By: anand1976
fbshipit-source-id: 3c2bcac34870e377949d8a79c55e33b8363b25dd
Summary:
- Add `--compression_max_dict_bytes` and `--compression_zstd_max_train_bytes` flags to stress test
- Randomly enable/disable the above flags in crash test
- Set `--compression_type=zstd` in FB-specific crash test runs
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4234
Differential Revision: D9187207
Pulled By: ajkr
fbshipit-source-id: 8d78cf8d8e1165f2cd1c32e069b73726b5bc1fd2
Summary:
clang compilation is failing due to a4fb1f8c04. In that commit I added a call to `std::atomic::is_lock_free` which was evidently relying on a compiler builtin only present in gcc.
Drawbacks to this fix are:
- users may need to install libatomic
- there might be cases where clang is used even though USE_CLANG is unset (e.g., when clang is the only available compiler). I didn't figure out how to add -latomic in those cases...
An alternative fix mentioned in http://lists.llvm.org/pipermail/llvm-bugs/2017-August/057263.html is using -stdlib=libc++ with clang.
Closes https://github.com/facebook/rocksdb/pull/3769
Differential Revision: D7756261
Pulled By: ajkr
fbshipit-source-id: 26888300683fa9970ab5950239d1aa217e8efd49
Summary:
I modified the Makefile so that we can compile rocksdb on OpenBSD.
The instructions for building have been added to INSTALL.md.
The whole compilation process works fine like this on OpenBSD-current
Closes https://github.com/facebook/rocksdb/pull/3617
Differential Revision: D7323754
Pulled By: siying
fbshipit-source-id: 990037d1cc69138d22f85bd77ef4dc8c1ba9edea
Summary:
In attempting to build a static lib for use in iOS, I ran in to lots of type errors between uint64_t and size_t. This PR contains the changes I made to get `TARGET_OS=IOS make static_lib` to succeed while also getting Xcode to build successfully with the resulting `librocksdb.a` library imported.
This also compiles for me on macOS and tests fine, but I'm really not sure if I made the correct decisions about where to `static_cast` and where to change types.
Also up for discussion: is iOS worth supporting? Getting the static lib is just part one, we aren't providing any bridging headers or wrappers like the ObjectiveRocks project, it won't be a great experience.
Closes https://github.com/facebook/rocksdb/pull/3503
Differential Revision: D7106457
Pulled By: gfosco
fbshipit-source-id: 82ac2073de7e1f09b91f6b4faea91d18bd311f8e
Summary:
This patch addressed several issues.
Portability including db_test std::thread -> port::Thread Cc: @
and %z to ROCKSDB portable macro. Cc: maysamyabandeh
Implement Env::AreFilesSame
Make the implementation of file unique number more robust
Get rid of C-runtime and go directly to Windows API when dealing
with file primitives.
Implement GetSectorSize() and aling unbuffered read on the value if
available.
Adjust Windows Logger for the new interface, implement CloseImpl() Cc: anand1976
Fix test running script issue where $status var was of incorrect scope
so the failures were swallowed and not reported.
DestroyDB() creates a logger and opens a LOG file in the directory
being cleaned up. This holds a lock on the folder and the cleanup is
prevented. This fails one of the checkpoin tests. We observe the same in production.
We close the log file in this change.
Fix DBTest2.ReadAmpBitmapLiveInCacheAfterDBClose failure where the test
attempts to open a directory with NewRandomAccessFile which does not
work on Windows.
Fix DBTest.SoftLimit as it is dependent on thread timing. CC: yiwu-arbug
Closes https://github.com/facebook/rocksdb/pull/3552
Differential Revision: D7156304
Pulled By: siying
fbshipit-source-id: 43db0a757f1dfceffeb2b7988043156639173f5b
Summary:
I have updated the Vagrantfile to have an entry for CentOS 7. Also created a simple build script which is pretty similar to the one in Beringei.
How to test:
```
vagrant up centos7
```
Todo:
Implement -j X for the build.
Closes https://github.com/facebook/rocksdb/pull/3530
Differential Revision: D7090739
Pulled By: ajkr
fbshipit-source-id: 9f9eda5b507568993543d08de7ce168dfc12282e
Summary:
Add a legocastle job to continuously build the last 10 commits every 4 hours and report lite build binary size to scuba.
Closes https://github.com/facebook/rocksdb/pull/3511
Differential Revision: D7001730
Pulled By: yiwu-arbug
fbshipit-source-id: 7c8ca87c46d663c786a0d32be69ebbe7b19a5eb9
Summary: Grandfather in super old lint issues to make a clean slate for moving forward that allows us to have stronger enforcement on new issues.
Reviewed By: yiwu-arbug
Differential Revision: D6821806
fbshipit-source-id: 22797d31ec58e9eb0255d3b66fedfcfcb0dc127c
Summary:
Most popular versions of GCC can't identify platform on ARM if "-march=native" is specified. Remove it to unblock most people.
Closes https://github.com/facebook/rocksdb/pull/3346
Differential Revision: D6690544
Pulled By: siying
fbshipit-source-id: bbaba9fe2645b6b37144b36ea75beeff88992b49
Summary:
**# Summary**
RocksDB uses SSE crc32 intrinsics to calculate the crc32 values but it does it in single way fashion (not pipelined on single CPU core). Intel's whitepaper () published an algorithm that uses 3-way pipelining for the crc32 intrinsics, then use pclmulqdq intrinsic to combine the values. Because pclmulqdq has overhead on its own, this algorithm will show perf gains on buffers larger than 216 bytes, which makes RocksDB a perfect user, since most of the buffers RocksDB call crc32c on is over 4KB. Initial db_bench show tremendous CPU gain.
This change uses the 3-way SSE algorithm by default. The old SSE algorithm is now behind a compiler tag NO_THREEWAY_CRC32C. If user compiles the code with NO_THREEWAY_CRC32C=1 then the old SSE Crc32c algorithm would be used. If the server does not have SSE4.2 at the run time the slow way (Non SSE) will be used.
**# Performance Test Results**
We ran the FillRandom and ReadRandom benchmarks in db_bench. ReadRandom is the point of interest here since it calculates the CRC32 for the in-mem buffers. We did 3 runs for each algorithm.
Before this change the CRC32 value computation takes about 11.5% of total CPU cost, and with the new 3-way algorithm it reduced to around 4.5%. The overall throughput also improved from 25.53MB/s to 27.63MB/s.
1) ReadRandom in db_bench overall metrics
PER RUN
Algorithm | run | micros/op | ops/sec |Throughput (MB/s)
3-way | 1 | 4.143 | 241387 | 26.7
3-way | 2 | 3.775 | 264872 | 29.3
3-way | 3 | 4.116 | 242929 | 26.9
FastCrc32c|1 | 4.037 | 247727 | 27.4
FastCrc32c|2 | 4.648 | 215166 | 23.8
FastCrc32c|3 | 4.352 | 229799 | 25.4
AVG
Algorithm | Average of micros/op | Average of ops/sec | Average of Throughput (MB/s)
3-way | 4.01 | 249,729 | 27.63
FastCrc32c | 4.35 | 230,897 | 25.53
2) Crc32c computation CPU cost (inclusive samples percentage)
PER RUN
Implementation | run | TotalSamples | Crc32c percentage
3-way  | 1  | 4,572,250,000 | 4.37%
3-way  | 2  | 3,779,250,000 | 4.62%
3-way  | 3  | 4,129,500,000 | 4.48%
FastCrc32c   | 1  | 4,663,500,000 | 11.24%
FastCrc32c   | 2  | 4,047,500,000 | 12.34%
FastCrc32c   | 3  | 4,366,750,000 | 11.68%
**# Test Plan**
make -j64 corruption_test && ./corruption_test
By default it uses 3-way SSE algorithm
NO_THREEWAY_CRC32C=1 make -j64 corruption_test && ./corruption_test
make clean && DEBUG_LEVEL=0 make -j64 db_bench
make clean && DEBUG_LEVEL=0 NO_THREEWAY_CRC32C=1 make -j64 db_bench
Closes https://github.com/facebook/rocksdb/pull/3173
Differential Revision: D6330882
Pulled By: yingsu00
fbshipit-source-id: 8ec3d89719533b63b536a736663ca6f0dd4482e9
Summary:
I started adding gflags support for cmake on linux and got frustrated that I'd need to duplicate the build_detect_platform logic, which determines namespace based on attempting compilation. We can do it differently -- use the GFLAGS_NAMESPACE macro if available, and if not, that indicates it's an old gflags version without configurable namespace so we can simply hardcode "google".
Closes https://github.com/facebook/rocksdb/pull/3212
Differential Revision: D6456973
Pulled By: ajkr
fbshipit-source-id: 3e6d5bde3ca00d4496a120a7caf4687399f5d656
Summary:
If possible, use -march or -mcpu to get enable all features available on the local CPU or architecture. Only if this is impossible, we will manually set -msse4.2. It should be safe as there'll be a warning printed if `USE_SSE` is set and the provided flags are insufficient to support SSE4.2.
Closes https://github.com/facebook/rocksdb/pull/3156
Differential Revision: D6304703
Pulled By: ajkr
fbshipit-source-id: 030a53491263300cae7fafb429114d87acc828ef
Summary:
Add per-exe execution capability
Add fix parsing of groups/tests
Add timer test exclusion
Fix unit tests
Ifdef threadpool specific tests that do not pass on Vista threadpool.
Remove spurious outout from prefix_test so test case listing works
properly.
Fix not using standard test directories results in file creation errors
in sst_dump_test.
BlobDb fixes:
In C++ end() iterators can not be dereferenced. They are not valid.
When deleting blob_db_ set it to nullptr before any other code executes.
Not fixed:. On Windows you can not delete a file while it is open.
[ RUN ] BlobDBTest.ReadWhileGC
d:\dev\rocksdb\rocksdb\utilities\blob_db\blob_db_test.cc(75): error: DestroyBlobDB(dbname_, options, bdb_options)
IO error: Failed to delete: d:/mnt/db\testrocksdb-17444/blob_db_test/blob_dir/000001.blob: Permission denied
d:\dev\rocksdb\rocksdb\utilities\blob_db\blob_db_test.cc(75): error: DestroyBlobDB(dbname_, options, bdb_options)
IO error: Failed to delete: d:/mnt/db\testrocksdb-17444/blob_db_test/blob_dir/000001.blob: Permission denied
write_batch
Should not call front() if there is a chance the container is empty
Closes https://github.com/facebook/rocksdb/pull/3152
Differential Revision: D6293274
Pulled By: sagar0
fbshipit-source-id: 318c3717c22087fae13b18715dffb24565dbd956
Summary:
* make `checksum_type_string_map` available for lite
* comment out `FilesPerLevel` in lite mode.
* travis and legocastle lite build also build `all` target and run tests
Closes https://github.com/facebook/rocksdb/pull/3015
Differential Revision: D6069822
Pulled By: yiwu-arbug
fbshipit-source-id: 9fe92ac220e711e9e6ed4e921bd25ef4314796a0
Summary:
Update dependencies.sh. Also update tbb to 4.3, which is the latest available in TP2.
Closes https://github.com/facebook/rocksdb/pull/2812
Differential Revision: D5741394
Pulled By: yiwu-arbug
fbshipit-source-id: cafa0b7179f9a44669e5ccace818a02b42336781
Summary:
Most of the data used here in shell commands is not generated directly from user input but some data (ie: from environment variables) may have been external influenced. It is a good practice to escape this data before using it in a shell command.
Originally D4800264 but we never quite got it merged.
Reviewed By: yiwu-arbug
Differential Revision: D5595052
fbshipit-source-id: c09d8b47fe35fc6a47afb4933ccad9d56ca8d7be
Summary:
With some compilers, `-std=c++11` is necessary for <cstdint> to be
available. Pass this flag via $PLATFORM_CXXFLAGS. Fixes#2488.
Closes https://github.com/facebook/rocksdb/pull/2545
Differential Revision: D5620610
Pulled By: yiwu-arbug
fbshipit-source-id: 2f975b8c1ad52e283e677d9a33543abd064f13ce
Summary:
TSAN shows error when we grab too many locks at the same time. In TSAN crash test, make one shard key cover 2^22 keys so that no many keys will be hold at the same time.
Closes https://github.com/facebook/rocksdb/pull/2719
Differential Revision: D5609035
Pulled By: siying
fbshipit-source-id: 930e5d63fff92dbc193dc154c4c615efbdf06c6a
Summary:
Seems the only function of the script is to create a new branch, which can be done easily. I'm removing it.
Closes https://github.com/facebook/rocksdb/pull/2623
Differential Revision: D5468681
Pulled By: yiwu-arbug
fbshipit-source-id: 87dea5ecc4c85e06941ccbc36993f7f589063878
Summary:
We don't need this format compatibility hack anymore. We should remove it to make things simpler.
Closes https://github.com/facebook/rocksdb/pull/2607
Differential Revision: D5444107
Pulled By: siying
fbshipit-source-id: 7ef587dd0cacfc15a4083a137adba8e6bfddac7e
Summary:
We forgot to add the new flag in internal build script. Add it.
Closes https://github.com/facebook/rocksdb/pull/2360
Differential Revision: D5121428
Pulled By: siying
fbshipit-source-id: af72d48cd855b37df1ce3c1fbb00c80377ba6e4f
Summary:
We've had a couple CockroachDB users fail to build RocksDB on exotic platforms, so I figured I'd try my hand at solving these issues upstream. The problems stem from a) `USE_SSE=1` being too aggressive about turning on SSE4.2, even on toolchains that don't support SSE4.2 and b) RocksDB attempting to detect support for thread-local storage based on OS, even though it can vary by compiler on the same OS.
See the individual commit messages for details. Regarding SSE support, this PR should change virtually nothing for non-CMake based builds. `make`, `PORTABLE=1 make`, `USE_SSE=1 make`, and `PORTABLE=1 USE_SSE=1 make` function exactly as before, except that SSE support will be automatically disabled when a simple SSE4.2-using test program fails to compile, as it does on OpenBSD. (OpenBSD's ports GCC supports SSE4.2, but its binutils do not, so `__SSE_4_2__` is defined but an SSE4.2-using program will fail to assemble.) A warning is emitted in this case. The CMake build is modified to support the same set of options, except that `USE_SSE` is spelled `FORCE_SSE42` because `USE_SSE` is rather useless now that we can automatically detect SSE support, and I figure changing options in the CMake build is less disruptive than changing the non-CMake build.
I've tested these changes on all the platforms I can get my hands on (macOS, Windows MSVC, Windows MinGW, and OpenBSD) and it all works splendidly. Let me know if there's anything you object to—I obviously don't mean to break any of your build pipelines in the process of fixing ours downstream.
Closes https://github.com/facebook/rocksdb/pull/2199
Differential Revision: D5054042
Pulled By: yiwu-arbug
fbshipit-source-id: 938e1fc665c049c02ae15698e1409155b8e72171
Summary:
Currently, the RPM package will install the lib and header files into `/usr/package/lib` and `/usr/package/include` which is not in the default search paths. It is reasonable to install them under `/usr/lib` and `/usr/include` so that no extra configuration is required.
Closes https://github.com/facebook/rocksdb/pull/2221
Differential Revision: D5054030
Pulled By: yiwu-arbug
fbshipit-source-id: 1d23de5ff21f07e6738c9dfa04429acd7a839143
Summary:
- added a feature test in build_detect_platform to check whether sched_getcpu() is available. glibc offers it only on some platforms (e.g., linux but not mac); this way should be easier than maintaining a list of platforms on which it's available.
- refactored PhysicalCoreID() to be simpler / less repetitive. ordered the conditional compilation clauses from most-to-least preferred
Closes https://github.com/facebook/rocksdb/pull/2272
Differential Revision: D5038093
Pulled By: ajkr
fbshipit-source-id: 81d7db3cc620250de220bdeb3194b2b3d7673de7
Summary:
VALGRIND_VER was left empty after moving the environment to GCC-5. Set it back.
Closes https://github.com/facebook/rocksdb/pull/2234
Differential Revision: D4978534
Pulled By: siying
fbshipit-source-id: f0640d58e8f575f75fb3f8b92e686c9e0b6a59bb
Summary:
Replacement of #2147
The change was squashed due to a lot of conflicts.
Closes https://github.com/facebook/rocksdb/pull/2194
Differential Revision: D4929799
Pulled By: siying
fbshipit-source-id: 5cd49c254737a1d5ac13f3c035f128e86524c581
Summary:
When people are working off of a rocksdb fork, i.e. when their 'origin'
points to github.com/<username>/rocksdb, the script creates a new branch
and pushes to their origin. The new branch created by this script should
instead be pushed to github.com/facebook/rocksdb. Many people might
have named facebook/rocksdb remote as 'upstream' (or something else).
This fix provides an option to specify the remote to push the branch to.
The default is still 'origin'
More context:
When I created 5.4 branch using this script, it got pushed to sagar0/rocksdb instead of facebook/rocksdb, as I was working off of a fork. My 'origin' was pointing to sagar0/rocksdb. My 'upstream' was set to 'facebook/rocksdb'. So, I had to manually push the branch to my 'upstream'.
Closes https://github.com/facebook/rocksdb/pull/2156
Differential Revision: D4885333
Pulled By: sagar0
fbshipit-source-id: 9410eab5bd9bbefc340059800bd6b8434406729d
Summary:
Rework test running script.
New options SuiteRun - runs specified executables as google suite
test cases in parallel.
Run - this option now runs executables in parallel the same as 'tests'
RunAll - scans for test executables and attempts to run them all
as suites except those mentiones in RunOnly (hardcoded in the script)
or specified either in $ExcludeTestCases $ExcludeTestExe
Closes https://github.com/facebook/rocksdb/pull/2089
Differential Revision: D4832212
Pulled By: yiwu-arbug
fbshipit-source-id: 954990c
Summary:
Since non_shn CI was made to run in parallel, /dev/shm is automatically used. It defeated the purpose of the test to cover a non-ramfs file system.
Closes https://github.com/facebook/rocksdb/pull/2031
Differential Revision: D4764804
Pulled By: siying
fbshipit-source-id: 5666bda
Summary:
This fixes an issue when the most recent readers assume that alignment is always set even if direct io is off.
Also adjust slightly appveyor script to run db_basic_test cases concurrently.
Closes https://github.com/facebook/rocksdb/pull/1959
Differential Revision: D4671972
Pulled By: IslamAbdelRahman
fbshipit-source-id: 1886620
Summary:
The PATH update should put the Java path in the beginning, rather than the end. Otherwise, it will be overwritten. Also upgrade the Java version.
Closes https://github.com/facebook/rocksdb/pull/1912
Differential Revision: D4609854
Pulled By: siying
fbshipit-source-id: 3dc04f2
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
The gcc-4.8.1-glibc-2.17 platform is deprecated and will be removed
soon.
Closes https://github.com/facebook/rocksdb/pull/1839
Differential Revision: D4509684
Pulled By: siying
fbshipit-source-id: 3efe296
Summary:
Update clang-format script to format diff since last commit from master,
instead of just last commit. In our common workflow we usually endup
with multiple commits for a single PR. This change make it easier to
format all stacking changes.
Closes https://github.com/facebook/rocksdb/pull/1684
Differential Revision: D4340597
Pulled By: yiwu-arbug
fbshipit-source-id: c18949e
Summary:
Previously:
$ make format
Makefile:104: Warning: Compiling in debug mode. Don't use the resulting binary in production
build_tools/format-diff.sh
You didn't have clang-format-diff.py available in your computer!
You can download it by running:
curl http://goo.gl/iUW1u2
Makefile:868: recipe for target 'format' failed
make: *** [format] Error 128
$ curl http://goo.gl/iUW1u2 > ~/bin/clang-format-diff.py
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 276 0 276 0 0 148 0 --:--:-- 0:00:01 --:--:-- 148m
$ more ~/bin/clang-format-diff.py
<HTML>
<HEAD>
<TITLE>Moved Permanently</TITLE>
</HEAD>
<BODY BGCOLOR="#FFFFFF" TEXT="#000000">
<H1>Moved Permanently</H1>
The document has moved <A HREF="https://raw.github.com/leaningtech/duetto-clang/master/tools/clang-format/clang-format-diff.py">here</A>.
</BODY>
</HTML>
Closes https://github.com/facebook/rocksdb/pull/1680
Differential Revision: D4338495
Pulled By: yiwu-arbug
fbshipit-source-id: e2b24d8
Summary:
This diff includes an implementation of CompactionFilter that allows
users to write CompactionFilter in Lua. With this ability, users can
dynamically change compaction filter logic without requiring building
the rocksdb binary and restarting the database.
To compile, WITH_LUA_PATH must be specified to the base directory
of lua.
Closes https://github.com/facebook/rocksdb/pull/1478
Differential Revision: D4150138
Pulled By: yhchiang
fbshipit-source-id: ed84222
Summary:
Rocksdb currently has many references to std::map.emplace_back()
which is not implemented in gcc 4.7, but valid in gcc 4.8. Confirmed that
it did not build with gcc 4.7, but builds fine with gcc 4.8
Closes https://github.com/facebook/rocksdb/pull/1272
Differential Revision: D4101385
Pulled By: IslamAbdelRahman
fbshipit-source-id: f6af453
Summary:
valgrind_test is the correct way to run valgrind tests.
this is becasue we need to force DISABLE_JEMALLOC
Test Plan: Running sandcastle and contrun
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65451
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
Summary: Splitting the makefile part of D55581.
Test Plan:
make all check -j32
ROCKSDB_FBCODE_BUILD_WITH_481=1 make all check -j32
ROCKSDB_NO_FBCODE=1 make all check -j32
export TBB_BASE=/mnt/gvfs/third-party2/tbb/afa54b33cfcf93f1d90a3160cdb894d6d63d5dca/4.0_update2/gcc-4.9-glibc-2.20/e9936bf;
ROCKSDB_NO_FBCODE=1 CFLAGS="-I $TBB_BASE/include" LDFLAGS="-L $TBB_BASE/lib -Wl,-rpath=$TBB_BASE/lib" make all check -j32
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: kradhakrishnan, yhchiang, IslamAbdelRahman, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56979
Summary:
We have replaced LEVELDB_PLATFORM_POSIX with ROCKSDB_PLATFORM_POSIX in our code
replace it in Makefile
Test Plan: make check
Reviewers: sdong, yiwu, andrewkr, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61365
Summary:
We may not have permission on all /dev/shm to fix the sticky bit.
Making the sticky bit fix advisory.
Test Plan: Run CI job locally
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61371
Summary: We rely on a basic evaluation logic: when using an expression `A || B`, the `B` part will only get evaluated when `A` fails. Therefore the task creation tool is guaranteed to run if previous build/test step failed. To indicate the correct return value to shell, the task creation tool will call `exit(1)` which will cause Sandcastle to mark it as a failure.
Test Plan:
- Land the changes.
- Trigger a RocksDB contrun - observe the results.
- Look at the results from the nightly runs and fix issues as necessary.
Current testing so far has been in isolation for various components.
Reviewers: andrewkr, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60909
Summary:
Removing moreutils from sandcastle and adding gnu parallel.
Then passing in J= nproc command
Test Plan: Testing on sandcastle
Reviewers: sdong, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61017
Summary: Increase test timeout to some tests to unblock CI.
Test Plan: watch how it runs.
Reviewers: kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61263
Summary:
Tsan crash white-box test was disabled because it never ends. Re-enable it with reduced killing odds.
Add a parameter in crash test script to allow we pass it through an environment variable.
Test Plan: Run it manually.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61053
Summary: RocksDB behavior is slightly different between data on tmpfs and normal file systems. Add a test case to run RocksDB on normal file system.
Test Plan: See the tests launched by Phabricator
Reviewers: kradhakrishnan, IslamAbdelRahman, gunnarku
Reviewed By: gunnarku
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60963
Summary: I tried on my host and TSAN black box test runs well. I didn't see any problem with white box crash test too but it chance of hitting crash point is too low that it may run almost forever. First re-enable black box crash test to unblock the job.
Test Plan: Run it locally.
Reviewers: kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60951
Summary: As Title.
Test Plan: See how the diff works.
Reviewers: kradhakrishnan, andrewkr, gunnarku
Reviewed By: gunnarku
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60933
Summary: To make sure that we'll have additional verification for release builds, define a new category and add `make release` to per-diff/post-commit tests. This should in theory prevent the release MyRocks integration builds breaks from happening.
Test Plan:
- `[p]arc diff --preview`
- Observe the execution in Sandcastle and make sure that release build and tests are executed.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60441
Summary: Fix two minor typos and update the file name which is used to trigger the runs in case new changes have been committed.
Test Plan: - Testing with a private Sandcastle instance.
Reviewers: sdong, mung
Reviewed By: mung
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59919
Summary:
The main PHP code churn is caused by extracting the common code from `FacebookArcanistConfiguration.php` and `FacebookOldArcanistConfiguration.php` into `RocksDBCommonDeterminator.php`. This is necessary both for reducing the duplication of code and making sure that we can execute the common core logic separately from continuous runs.
The main logic in `RocksDBCommonDeterminator.php` remains quite the same with the exception of some things:
- Adding separation between the cases when a diff is submitted //vs.// when the code is triggered from a continuous run. There are certain actions which we should do in a case of diff only.
- Adding reporting - now the person who authored the diff will receive e-mail notifications if any of the jobs have failed.
- Enabling assertions and making sure that we'll terminate on failure. This is an internal code used by competent engineers, so instead of `if (!condition) { echo "Something"; exit(1); }` for every invariant I think that `assert(condition)` provides better readability with the same behavior. Especially taking into account that we're talking about things which shouldn't ever happen.
Enabling this entire process will be triggered internally and will be a subject of a separate code review. We should discuss the details of triggering continuous RocksDB build and tests on that diff.
Test Plan:
- Make sure that `[p]arc diff` scenario isn't broken by verifying that tests validating this diff will pass.
- Private testing of triggering the continuous build script.
- Once the changes will land then author an internal job which will use the script and verify its validity.
Reviewers: sdong, yhchiang, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59811
Summary: current libgcc lib path is broken, update it and make sure the new one exists
Test Plan:
verify that the new path exists
make check -j64
Reviewers: yiwu, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59535
Summary: current clang_analyze path is broken, update it
Test Plan:
USE_CLANG=1 TEST_TMPDIR=/dev/shm/rocksdb OPT=-g make J=64 analyze -j64
make sure it works
Reviewers: yiwu, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59505
Summary:
Added new features to help run the entire suite of tests on a diff
locally leveraging parallelism
Test Plan: Basic command line test
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59445
Summary:
Right now we use valgrind built with gcc-5-glibc-2.23 which keep generating this error everywhere
```
==3224756== Conditional jump or move depends on uninitialised value(s)
==3224756== at 0x401AD68: index (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4008933: _dl_map_object (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4000ECC: map_doit (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x40101C7: _dl_catch_error (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4000B34: do_preload (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x400458C: dl_main (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x40185DB: _dl_sysdep_start (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4004F39: _dl_start (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== by 0x4000CE7: ??? (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756== Uninitialised value was created by a stack allocation
==3224756== at 0x4004519: dl_main (in /usr/local/fbcode/gcc-4.9-glibc-2.20/lib/ld-2.20.so)
==3224756==
```
Test Plan: DISABLE_JEMALLOC=1 make valgrind_check -j64
Reviewers: andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59343
Summary:
Update `build_tools/update_dependencies.sh` to use /mnt/gvfs path in dependencies.sh
This should prevent us from having errors because of changing the path of a compiler or a library
Test Plan:
make all -j64
USE_CLANG make all -j64
ROCKSDB_FBCODE_BUILD_WITH_481=1 make all -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59295
Summary: clang was removed from tp2 so change to llvm-fb.
Test Plan:
USE_CLANG=1 make all -j64
Reviewers: yhchiang, andrewkr, kradhakrishnan, sdong, lightmark, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59259
Summary: The path to g++ was outdated. Ran ./build_tools/update_dependencies.sh.
Test Plan: make -j64 all
Reviewers: sdong, lightmark, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59229
Summary: Have sandcastle run unit test in lite mode for every diff.
Test Plan: seems sandcastle picked up changes here and running lite_test for this diff.
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57741
Summary: Warning is printed out with USE_CLANG=1 when including jemalloc.h. Disable it in that case.
Test Plan: Run db_bench with USE_CLANG=1 and not. Make sure they can all build and jemalloc status is printed out in the case where USE_CLANG is not set.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57399
Summary: It looks like we mistakenly enable JEMALLOC even if it's not available on the machine, that's why travis is failing
Test Plan:
check on my devserver
check on my mac
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57345
Summary:
Introduced option to dump malloc statistics using new option flag.
Added new command line option to db_bench tool to enable this
funtionality.
Also extended build to support environments with/without jemalloc.
Test Plan:
1) Build rocksdb using `make` command. Launch the following command
`./db_bench --benchmarks=fillrandom --dump_malloc_stats=true
--num=10000000` end verified that jemalloc dump is present in LOG file.
2) Build rocksdb using `DISABLE_JEMALLOC=1 make db_bench -j32` and ran
the same db_bench tool and found the following message in LOG file:
"Please compile with jemalloc to enable malloc dump".
3) Also built rocksdb using `make` command on MacOS to verify behavior
in non-FB environment.
Also to debug build configuration change temporary changed
AM_DEFAULT_VERBOSITY = 1 in Makefile to see compiler and build
tools output. For case 1) -DROCKSDB_JEMALLOC was present in compiler
command line. For both 2) and 3) this flag was not present.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57321
* Musl libc does not provide adaptive mutex. Added feature test for PTHREAD_MUTEX_ADAPTIVE_NP.
* Musl libc does not provide backtrace(3). Added a feature check for backtrace(3).
* Fixed compiler error.
* Musl libc does not implement backtrace(3). Added platform check for libexecinfo.
* Alpine does not appear to support gcc -pg option. By default (gcc has PIE option enabled) it fails with:
gcc: error: -pie and -pg|p|profile are incompatible when linking
When -fno-PIE and -nopie are used it fails with:
/usr/lib/gcc/x86_64-alpine-linux-musl/5.3.0/../../../../x86_64-alpine-linux-musl/bin/ld: cannot find gcrt1.o: No such file or directory
Added gcc -pg platform test and output PROFILING_FLAGS accordingly. Replaced pg var in Makefile with PROFILING_FLAGS.
* fix segfault when TEST_IOCTL_FRIENDLY_TMPDIR is undefined and default candidates are not suitable
* use ASSERT_DOUBLE_EQ instead of ASSERT_EQ
* When compiled with ROCKSDB_MALLOC_USABLE_SIZE UniversalCompactionFourPaths and UniversalCompactionSecondPathRatio tests fail due to premature memtable flushes on systems with 16-byte alignment. Arena runs out of block space before GenerateNewFile() completes.
Increased options.write_buffer_size.
Summary:
Added a python script to parse combined stdout/stderr of legocastle
steps. Previously we just matched words like 'Failure', which didn't work since
even our test names matched that pattern.
I went through all the legocastle steps to come up with strict failure regexes
for the common failure cases. There is also some more complex logic to present
gtest failures, since the test name and failure message are not on the same
line.
There will definitely be error cases that don't match any of these patterns, so
we can iterate on it over time.
Test Plan:
no end-to-end test. I ran the legocastle steps locally and piped to
my script, then verified output, e.g.,
$ set -o pipefail && TEST_TMPDIR=/dev/shm/rocksdb COMPILE_WITH_ASAN=1 OPT=-g make J=1 asan_check |& /usr/facebook/ops/scripts/asan_symbolize.py -d |& python build_tools/error_filter.py asan
==2058029==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x60200000a414 at pc 0x4c12f6 bp 0x7ffcfb7a0520 sp 0x7ffcfb7a0518
Reviewers: kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56691
Summary:
proxy config tools are not available in sandcastle environment. Hard
coding the proxy information in the job.
Test Plan: Run manually
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56775
Summary:
Java build is downloading junit when not available. Without the proxy
settings exported that would not work.
Test Plan: Run manually
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56751
Summary: System was not able to locate javac
Test Plan: Run command manually and observe output
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56709
Summary:
Undefined Behavior Sanitizer (ubsan) is //a good thing// which will help us to find sneaky bugs with low cost. Please see http://developerblog.redhat.com/2014/10/16/gcc-undefined-behavior-sanitizer-ubsan/ for more details and official GCC documentation for more context: https://gcc.gnu.org/onlinedocs/gcc/Instrumentation-Options.html.
Changes itself are quite simple and pretty much imitating whatever is implemented for ASan.
Hooking the UBsan validation build to Sandcastle is a separate step and will be dealt as separate diff because code is in internal repository.
Test Plan: Make sure that that there no regressions when it comes to builds and test pass rate.
Reviewers: leveldb, sdong, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56049
Summary: Update jemalloc to newer versions, as well as some other dependencies. Only effective for FB internal.
Test Plan: See all tests run
Reviewers: IslamAbdelRahman, MarkCallaghan
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55947
Summary:
see https://github.com/facebook/rocksdb/issues/977; there are issues
with fallocate() on certain filesystems/kernel versions that can lead it to pre-
allocating blocks but never freeing them, even if they're unused.
Test Plan:
verified build commands omit DROCKSDB_FALLOCATE_PRESENT when this env
variable is set.
without disabling it:
$ ROCKSDB_NO_FBCODE=1 make -n env_test | grep -q DROCKSDB_FALLOCATE_PRESENT ; echo $?
0
with disabling it:
$ ROCKSDB_NO_FBCODE=1 DISABLE_FALLOCATE=1 make -n env_test | grep -q DROCKSDB_FALLOCATE_PRESENT ; echo $?
1
Reviewers: kradhakrishnan, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54069
Summary:
This patch update fbcode_config4.8.1.sh to get it's dependencies the same way we updated fbcode_config.sh in D53037
as a result zstd is upgraded to 0.4.7 instead of 0.4.5
Test Plan:
make clean && ROCKSDB_FBCODE_BUILD_WITH_481=1 make check -j64
make clean && ROCKSDB_FBCODE_BUILD_WITH_481=1 USE_CLANG=1 make check -j64
Reviewers: yhchiang, andrewkr, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53355
Summary:
This diff
- Include the rest of the dependencies (kernel-headers, binutils, valgrind) in dependencies.sh
- updtade zst to 0.4.7
- It also fix a problem in clang scan build
Test Plan:
make check
USE_CLANG=1 make check
USE_CLANG=1 make analyze
coverage_test.sh
Reviewers: sdong, yhchiang, rven, andrewkr, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53301
Summary:
Update fbcode_config.sh so that It try to use the latest version for dependencies that we are using, after updating the code these libraries where updated
```
Snappy: 1.0.3 => 1.1.3
GFLAGS: 1.6 => 2.1.1
JEMALLOC: 3.6.0 => 4.0.3
```
I have also updated clang from 3.7 to 3.7.1
```
Clang 3.7 => 3.7.1
```
Another change is that we use the same tp2 directory as fbcode, so we dont need to keep changing commit hash every time we need to change a version of a compiler or a library
Test Plan:
make check -j64
USE_CLANG=1 make check -j64
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32 (make sure it's running)
Reviewers: yhchiang, anthony, rven, kradhakrishnan, andrewkr, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D53037
Summary: This patch provides a mechanism to run pre commit tests on the local
branch before committing. This can help prevent frequent build breaks.
The tests can be run in parallel by specifying the J=<..> environment
variable.
Test Plan: Run manually
Reviewers: sdong rven tec
CC: leveldb@
Task ID: #9689218
Blame Rev:
