Summary:
Return an error from DeleteRange() (or Write() if the user is using the
low-level WriteBatch API) if an unsupported table type is configured.
Closes https://github.com/facebook/rocksdb/pull/1519
Differential Revision: D4185933
Pulled By: ajkr
fbshipit-source-id: abcdf84
Summary:
It's possible that we set min_write_buffer_number_to_merge to 0.
This should never happen
Closes https://github.com/facebook/rocksdb/pull/1515
Differential Revision: D4183356
Pulled By: yiwu-arbug
fbshipit-source-id: c9d39d7
Summary:
Adjusted AddToBuilder() to take lower_bound and upper_bound, which serve two purposes: (1) only range deletions overlapping with the interval [lower_bound, upper_bound) will be added to the output file, and (2) the output file's boundaries will not be extended before lower_bound or after upper_bound. Our computation of lower_bound/upper_bound consider both subcompaction boundaries and previous/next files within the subcompaction.
Test cases are here (level subcompactions: https://gist.github.com/ajkr/63c7eae3e9667c5ebdc0a7efb74ac332, and universal subcompactions: https://gist.github.com/ajkr/5a62af77c4ebe4052a1955c496d51fdb) but can't be included in this diff as they depend on committing the API first. They fail before this change and pass after.
Closes https://github.com/facebook/rocksdb/pull/1501
Reviewed By: yhchiang
Differential Revision: D4171685
Pulled By: ajkr
fbshipit-source-id: ee99db8
Summary:
This conditional should only open a new file that's dedicated to range deletions when it's the sole output of the subcompaction. Previously, we created such a file whenever the table builder was nullptr, which would've also been the case whenever the CompactionIterator's final key coincided with the final output table becoming full.
Closes https://github.com/facebook/rocksdb/pull/1507
Differential Revision: D4174613
Pulled By: ajkr
fbshipit-source-id: 9ffacea
Summary:
This makes it easier to implement future optimizations like range collapsing.
Closes https://github.com/facebook/rocksdb/pull/1504
Differential Revision: D4172214
Pulled By: ajkr
fbshipit-source-id: ac4942f
Summary:
Currently our skip-list have an optimization to speedup sequential
inserts from a single stream, by remembering the last insert position.
We extend the idea to support sequential inserts from multiple streams,
and even tolerate small reordering wihtin each stream.
This PR is the interface part adding the following:
- Add `memtable_insert_prefix_extractor` to allow specifying prefix for each key.
- Add `InsertWithHint()` interface to memtable, to allow underlying
implementation to return a hint of insert position, which can be later
pass back to optimize inserts.
- Memtable will maintain a map from prefix to hints and pass the hint
via `InsertWithHint()` if `memtable_insert_prefix_extractor` is non-null.
Closes https://github.com/facebook/rocksdb/pull/1419
Differential Revision: D4079367
Pulled By: yiwu-arbug
fbshipit-source-id: 3555326
Summary:
Implement a insert hint into skip-list to hint insert position. This is
to optimize for the write workload where there are multiple stream of
sequential writes. For example, there is a stream of keys of a1, a2,
a3... but also b1, b2, b2... Each stream are not neccessary strictly
sequential, but can get reorder a little bit. User can specify a prefix
extractor and the `SkipListRep` can thus maintan a hint for each of the
stream for fast insert into memtable.
This is the internal implementation part. See #1419 for the interface part.
See inline comments for details.
Closes https://github.com/facebook/rocksdb/pull/1449
Differential Revision: D4106781
Pulled By: yiwu-arbug
fbshipit-source-id: f4d48c4
Summary:
If user did not call SstFileWriter::Finish() or called Finish() but it failed.
We need to abandon the builder, to avoid destructing it while it's open
Closes https://github.com/facebook/rocksdb/pull/1502
Differential Revision: D4171660
Pulled By: IslamAbdelRahman
fbshipit-source-id: ab6f434
Summary:
Currently the compaction stats are printed to stdout. We want to export the compaction stats in a map format so that the upper layer apps (e.g., MySQL) could present
the stats in any format required by the them.
Closes https://github.com/facebook/rocksdb/pull/1477
Differential Revision: D4149836
Pulled By: maysamyabandeh
fbshipit-source-id: b3df19f
Summary:
This is a previous fix that has a typo
Closes https://github.com/facebook/rocksdb/pull/1487
Differential Revision: D4157381
Pulled By: lightmark
fbshipit-source-id: f079be8
Summary:
Originally sequence ids were calculated, in recovery, based off of the first seqid found if the first log recovered. The working seqid was then incremented from that value based on every insertion that took place. This was faulty because of the potential for missing log files or inserts that skipped the WAL. The current recovery scheme grabs sequence from current recovering batch and increments using memtableinserter to track how many actual inserts take place. This works for 2PC batches as well scenarios where some logs are missing or inserts that skip the WAL.
Closes https://github.com/facebook/rocksdb/pull/1486
Differential Revision: D4156064
Pulled By: reidHoruff
fbshipit-source-id: a6da8d9
Summary:
This fixes a correctness issue where ranges with same begin key would overwrite each other.
This diff uses InternalKey as TombstoneMap's key such that all tombstones have unique keys even when their start keys overlap. We also update TombstoneMap to use an internal key comparator.
End-to-end tests pass and are here (https://gist.github.com/ajkr/851ffe4c1b8a15a68d33025be190a7d9) but cannot be included yet since the DeleteRange() API is yet to be checked in. Note both tests failed before this fix.
Closes https://github.com/facebook/rocksdb/pull/1484
Differential Revision: D4155248
Pulled By: ajkr
fbshipit-source-id: 304b4b9
Summary:
Fix the following RocksDB Lite build failure in c_test.cc
db/c_test.c:1051:3: error: implicit declaration of function 'fprintf' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
fprintf(stderr, "SKIPPED\n");
^
db/c_test.c:1051:3: error: declaration of built-in function 'fprintf' requires inclusion of the header <stdio.h> [-Werror,-Wbuiltin-requires-header]
db/c_test.c:1051:11: error: use of undeclared identifier 'stderr'
fprintf(stderr, "SKIPPED\n");
^
3 errors generated.
Closes https://github.com/facebook/rocksdb/pull/1479
Differential Revision: D4151160
Pulled By: yhchiang
fbshipit-source-id: a471a30
Summary:
copied from: 5ebfd2623a
Opening existing RocksDB attempts recovery from log files, which uses
wrong sequence number to create the memtable. This is a regression
introduced in change a400336.
This change includes a test demonstrating the problem, without the fix
the test fails with "Operation failed. Try again.: Transaction could not
check for conflicts for operation at SequenceNumber 1 as the MemTable
only contains changes newer than SequenceNumber 2. Increasing the value
of the max_write_buffer_number_to_maintain option could reduce the
frequency of this error"
This change is a joint effort by Peter 'Stig' Edwards thatsafunnyname
and me.
Closes https://github.com/facebook/rocksdb/pull/1458
Differential Revision: D4143791
Pulled By: reidHoruff
fbshipit-source-id: 5a25033
Summary:
A deadlock is possible if this happen
(1) Writer thread is stopped because it's waiting for compaction to finish
(2) Compaction is waiting for current IngestExternalFile() calls to finish
(3) IngestExternalFile() is waiting to be able to acquire the writer thread
(4) WriterThread is held by stopped writes that are waiting for compactions to finish
This patch fix the issue by not incrementing num_running_ingest_file_ except when we acquire the writer thread.
This patch include a unittest to reproduce the described scenario
Closes https://github.com/facebook/rocksdb/pull/1480
Differential Revision: D4151646
Pulled By: IslamAbdelRahman
fbshipit-source-id: 09b39db
Summary:
In ForwardIterator::SeekInternal(), we may end up passing empty Slice representing an internal key to InternalKeyComparator::Compare.
and when we try to extract the user key from this empty Slice, we will create a slice with size = 0 - 8 ( which will overflow and cause us to read invalid memory as well )
Scenarios to reproduce these issues are in the unit tests
Closes https://github.com/facebook/rocksdb/pull/1467
Differential Revision: D4136660
Pulled By: lightmark
fbshipit-source-id: 151e128
Summary:
Note: reviewed in https://reviews.facebook.net/D65115
- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464
Differential Revision: D4131753
Pulled By: ajkr
fbshipit-source-id: be86559
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.
added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456
Differential Revision: D4111271
Pulled By: ajkr
fbshipit-source-id: 6e388d4
Summary:
IngestExternalFile is very useful when doing bulk load. This pr expose this API to c so many bindings can benefit from it too.
Closes https://github.com/facebook/rocksdb/pull/1454
Differential Revision: D4113420
Pulled By: yiwu-arbug
fbshipit-source-id: 307c6ae
Summary:
Changed BuildTable() (used for flush) to (1) add range
tombstones to the aggregator, which is used by CompactionIterator to
determine which keys can be removed; and (2) add aggregator's range
tombstones to the table that is output for the flush.
Closes https://github.com/facebook/rocksdb/pull/1438
Differential Revision: D4100025
Pulled By: ajkr
fbshipit-source-id: cb01a70
Summary:
Passing std::atomic<uint64_t> variables to ASSERT_EQ()
results in compile error
C2718 'const T1': actual parameter with requested alignment of 8 won't be aligned.
VS2015 defines std::atomic as specially aligned type ( with 'alignas'),
however the compiler does not like declspec(align)ed function
arguments.
Worked around by casting std::atomic<uint64_t> types to uint64_t
in ASSERT_EQ.
Closes https://github.com/facebook/rocksdb/pull/1450
Differential Revision: D4106788
Pulled By: yiwu-arbug
fbshipit-source-id: 5fb42c3
Summary:
Currently the compression suppport and fast CRC support information is printed as info level. They should be in the same level as options, which is header level.
Also add ZSTD to this printing.
Closes https://github.com/facebook/rocksdb/pull/1448
Differential Revision: D4106608
Pulled By: yiwu-arbug
fbshipit-source-id: cb9a076
Summary:
DB Stats now are truncated if there are too many CFs. Extend the buffer size to allow more to be printed out. Also, separate out malloc to another log line.
Closes https://github.com/facebook/rocksdb/pull/1439
Differential Revision: D4100943
Pulled By: yiwu-arbug
fbshipit-source-id: 79f7218
Summary:
The current 10 millisecond waiting for test results may not be sufficient in some test environments. Increase it to 60 seconds and check the results for every 1 milliseond.
Already reviewed: https://reviews.facebook.net/D65457
Closes https://github.com/facebook/rocksdb/pull/1437
Differential Revision: D4099443
Pulled By: siying
fbshipit-source-id: cf1f205
Summary:
A bug that tailingIterator->Seek(target) skips records.
I think the bug is in the SeekInternal starting at lines 387:
search_left_bound > search_right_bound
There are only 2 cases this can happen:
(1) target key is smaller than left most file
(2) target key is larger than right most file
The comment is wrong, there is another possibility that at the higher level there is a big gap such that the file in the lower level fits completely in the gap and then
indexer->GetNextLevelIndex returns search_left_bound > search_right_bound I think pointing on the files after and before the gap.
details: https://github.com/facebook/rocksdb/issues/1372
fixed this bug with test case added.
Closes https://github.com/facebook/rocksdb/pull/1436
Reviewed By: IslamAbdelRahman
Differential Revision: D4099313
Pulled By: lightmark
fbshipit-source-id: 6a675b3
Summary:
Currently, we don't use options.compression_per_level[0] as the compression style for L0 compression type, unless it is None. This behavior
doesn't look like on purpose. This diff will make sure L0 compress using the style of options.compression_per_level[0].
Reviewed and accepted in: https://reviews.facebook.net/D65607
Closes https://github.com/facebook/rocksdb/pull/1435
Differential Revision: D4099368
Pulled By: siying
fbshipit-source-id: cfbbdcd
Summary: As offline discussion with Siying, revert this since it has bug with seek.
Test Plan: make check -j64
Reviewers: yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65559
Summary:
The verification condition of the test DBTest.RepeatedWritesToSameKey doesn't hold anymore after 3ce3bb3da2.
Disable the test for now before we find a way to replace it.
Test Plan: Run the test and make sure it is disabled.
Summary: Siying suggested to keep old code for normal mode prev() for safety
Test Plan: make check -j64
Reviewers: yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65439
Summary: Using real clock causes failures of DBSSTTest.RateLimitedDelete in some cases. Turn away from the real time. Use fake time instead.
Test Plan: Run the tests and all existing tests.
Reviewers: yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65145
Summary:
The previous fix of reappearing of a deleted row 0ce258f9b3 missed a corner case, which can be reproduced using test CompactionPickerTest.OverlappingUserKeys7. Consider such an example:
input level file: 1[B E] 2[F H]
output level file: 3[A C] 4[D I] 5[I K]
First file 2 is picked, which overlaps to file 4. 4 expands to 5. Now the all range is [D K] with 2 output level files. When we try to expand that, [D K] overlaps with file 1 and 2 in the input level, and 1 and 2 overlaps with 3 and 4 in the output level. So we end up with picking 3 and 4 in the output level. Without expanding, it also has 2 files, so we determine the output level doesn't change, although they are the different two files.
The fix is to expand the output level files after we picked 3 and 4. In that case, there will be three output level files so we will abort the expanding.
I also added two unit tests related to marked_for_compaction and being_compacted. They have been passing though.
Test Plan: Run the new unit test, as well as all other tests.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65373
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.
Test Plan: make all check -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65121
Summary:
Changes in the diff
API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API
Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers
Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob
Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)
Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: jkedgar, hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65061
Summary: DBTestUniversalCompaction.UniversalCompactionTrivialMoveTest2 verifies non-trivial move is not triggered if we load data in sequential order. However, if there are multiple compaction threads, this conditon may not hold. Restrict the running condition to 1 compaction thread to make the test more robust.
Test Plan: Run the test and make sure at least it doesn't regress normally.
Reviewers: yhchiang, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65277
Summary: Some tests in column_family_test depend on functions that are not available in LITE build, which sometimes cause flakiness. Disable them.
Test Plan: Run those tests in LITE build.
Reviewers: yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65271
Summary:
reland https://reviews.facebook.net/D62523
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: sdong, yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65211
Summary: we should not split file on level 0 in compaction because it will fail the following verification of seqno order on level 0
Test Plan: check with filldeterministic in db_bench
Reviewers: yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65193
Summary: in rocksdb::DBIter::FindValueForCurrentKey(), last_not_merge_type could also be SingleDelete() which is omitted
Test Plan: db_iter_test
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65187
Summary: SamePrefixTest.InDomainTest may fail if the previous run of some test cases in prefix_test fail.
Test Plan: Run the test
Reviewers: lightmark, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65163
Summary:
MyRocks hit a regression, @mung generated perf reports showing that the reason is the cost of calling `GetDBOptions()` inside `GetFromBatchAndDB()`
This diff avoid calling `GetDBOptions` and use the `ImmutableDBOptions` instead
Test Plan: make check -j64
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, mung
Differential Revision: https://reviews.facebook.net/D65151
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
Summary:
Previously the WAL files that were avoided during recovery would never
be considered for deletion. That was because alive_log_files_ was only
populated when log files are created. This diff further populates
alive_log_files_ with existing log files that aren't flushed during recovery,
such that FindObsoleteFiles() can find them later.
Depends on D64053.
Test Plan: new unit test, verifies it fails before this change and passes after
Reviewers: sdong, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64059
Summary:
Previously we have an assertion which triggers when we issue Merges
after a single delete. However, merges after a single delete are
unrelated to that single delete. Thus this behavior should be
allowed.
This will address a flakyness of db_stress.
Test Plan: db_stress
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64923
Summary:
Issue scenario:
(1) We have 3 files in L1 and we issue a compaction that will compact them into 1 file in L2
(2) While compaction (1) is running, we flush a file into L0 and trigger another compaction that decide to move this file to L1 and then move it again to L2 (this file don't overlap with any other files)
(3) compaction (1) finishes and install the file it generated in L2, but this file overlap with the file we generated in (2) so we break the LSM consistency
Looks like this issue can be triggered by using non-exclusive manual compaction or AddFile()
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: hermanlee4, jkedgar, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D64947
Summary: I accidentally left out these changes from my commit of D64053 due to
messing up the merge conflict resolution.
Test Plan: ./db_wal_test
Reviewers:
Subscribers:
Tasks:
Blame Revision: D64053
Summary:
This reverts commit 9e4aa798c3,
which doesn't handle all cases (see inline comment).
I reimplemented the logic as suggested in the initial PR: https://github.com/facebook/rocksdb/pull/1313.
This approach has two benefits:
- All the parsing/filtering of full_scan_candidate_files is kept together in PurgeObsoleteFiles.
- We only need to check whether log file is recycled in one place where we've already determined it's a log file
Test Plan:
new unit test, verified fails before the original fix, still passes
now.
Reviewers: IslamAbdelRahman, yiwu, sdong
Reviewed By: yiwu, sdong
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64053
Summary:
1) The previous solution for Prev() prefix support is not clean.
Since I add api SeekForPrev(), now the Prev() can be symmetric to Next().
and we do not need SeekToLast() to be called in Prev() any more.
Also, Next() will Seek(prefix_seek_key_) to solve the problem of possible inconsistency between db_iter and merge_iter when
there is merge_operator. And prefix_seek_key is only refreshed when change direction to forward.
2) This diff also solves the bug of Iterator::SeekToLast() with iterate_upper_bound_ with prefix extractor.
add test cases for the above two cases.
There are some tests for the SeekToLast() in Prev(), I will clean them later.
Test Plan: make all check
Reviewers: IslamAbdelRahman, andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63933
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode
Test Plan:
make check -j64
make release
Reviewers: lightmark, sdong, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64701
Summary:
When constructing a write batch a client may now call MarkWalTerminationPoint() on that batch. No batch operations after this call will be added written to the WAL but will still be inserted into the Memtable. This facility is used to remove one of the three WriteImpl calls in 2PC transactions. This produces a ~1% perf improvement.
```
RocksDB - unoptimized 2pc, sync_binlog=1, disable_2pc=off
INFO 2016-08-31 14:30:38,814 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2619 seconds. Requests/second = 28628
RocksDB - optimized 2pc , sync_binlog=1, disable_2pc=off
INFO 2016-08-31 16:26:59,442 [main]: REQUEST PHASE COMPLETED. 75000000 requests done in 2581 seconds. Requests/second = 29054
```
Test Plan: Two unit tests added.
Reviewers: sdong, yiwu, IslamAbdelRahman
Reviewed By: yiwu
Subscribers: hermanlee4, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D64599
Summary:
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: andrewkr, yhchiang, yiwu, sdong
Reviewed By: sdong
Subscribers: hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62523
Summary:
- Store range tombstones in a separate MemTableRep instantiated with ColumnFamilyOptions::memtable_factory
- MemTable::NewRangeTombstoneIterator() returns a MemTableIterator over the separate MemTableRep
- Part of the read path is not implemented yet (i.e., MemTable::Get())
Test Plan: see unit tests
Reviewers: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62217
Summary:
Fix the conflict bug between AddFile() and CompactRange() by
- Make sure that no AddFile calls are running when asking CompactionPicker to pick compaction for manual compaction
- If AddFile() run after we pick the compaction for the manual compaction it will be aware of it since we will add the manual compaction to running_compactions_ after picking it
This will solve these 2 scenarios
- If AddFile() is running, we will wait for it to finish before we pick a compaction for the manual compaction
- If we already picked a manual compaction and then AddFile() started ... we ensure that it never ingest a file in a level that will overlap with the manual compaction
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64449
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary: We didn't recompute compaction score on SetOptions, and end up not having compaction if no flush happens afterward. The PR fixing it.
Test Plan: See unit test.
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64167
Summary:
Since AddFile unlock/lock the mutex inside LogAndApply() we need to ensure that during this period other compactions cannot run since such compactions are not aware of the file we are ingesting and could create a compaction that overlap wit this file
this diff add
- WaitForAddFile() call that will ensure that no AddFile() calls are being processed right now
- Call `WaitForAddFile()` in 3 locations
-- When doing manual Compaction
-- When starting automatic Compaction
-- When doing CompactFiles()
Test Plan: unit test
Reviewers: lightmark, yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64383
Summary: we should not call ShouldStopBefore() in compaction when the compaction targets level 0. Otherwise, CheckConsistency will fail the assertion of seq number check on level 0.
Test Plan:
make all check -j64
I also manully test that using db_bench to compact files to level 0. Without this line change, the assertion files and multiple files are generated on level 0 after compaction.
Reviewers: yhchiang, andrewkr, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64269
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
Revert the behavior where we don't read sequence id from WAL, but increase it as we replay the log. We still keep the behave for 2PC for now but will fix later.
This change fixes github issue 1339, where some writes come with WAL disabled and we may recover records with wrong sequence id.
Test Plan: Added unit test.
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64275
Summary: add ColumnFamilyHandleDeletionStarted listener which can be called when user deletes handler.
Test Plan: ./listener_test
Reviewers: yiwu, IslamAbdelRahman, sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60717
Summary:
Report more information about the ingested files in CF InternalStats
- Total files
- Total L0 files
- Total keys
There was also noticed that we were reporting files that failed to ingest, fix this bug
Test Plan: print stats in tests
Reviewers: sdong, andrewkr, lightmark
Reviewed By: lightmark
Subscribers: jkedgar, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D63039
Summary:
Mitigate regression bug of options.max_successive_merges hit during DB Recovery
For https://reviews.facebook.net/D62625
Test Plan: make all check
Reviewers: horuff, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62655
Summary: WritableFile::SetPreallocationBlockSize() requires parameter as size_t, and options used in DBImpl::GetWalPreallocateBlockSize() are all size_t. WritableFile::SetPreallocationBlockSize() should return size_t to avoid build break if size_t is not uint64_t.
Test Plan: Run existing tests.
Reviewers: andrewkr, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64137
Summary: Currently the WAL file preallocation size is 1.1 * write_buffer_size. This, however, will be over-estimated if options.db_write_buffer_size or options.max_total_wal_size is set and is much smaller.
Test Plan: Add a unit test.
Reviewers: andrewkr, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63957
Summary: One more small refactor before I split DBOptions into mutable and immutable parts.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64047
Summary: RandomInitCFOptions will allocate a new compaction filter, which we have to delete afterward.
Test Plan: valgrind against the test
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64011
Summary: Seems there's no std::array on mac+clang. Use raw array instead.
Test Plan: run ./db_wal_test on mac.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64005
Summary:
if one or more CFs had no data in the WAL, the log number that's used
by FindObsoleteFiles() wasn't updated. We need to treat this case the same as
if the data for that WAL had been flushed.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63963
Summary:
Previously the sequence number was mistakenly passed in an argument
where the log number should go. This caused the reader to assume the old WAL
format was used, which is incompatible with the WAL recycling format.
Test Plan:
new unit test, verified it fails before this change and passes
afterwards.
Reviewers: yiwu, lightmark, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63987
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63945
If log recycling is enabled with the rocksdb (recycle_log_file_num=16)
db->Writebatch is erroring out with keynotfound after ~5-6 hours of run
(1M seq but can happen to any workload I guess).See my detailed bug
report here (https://github.com/facebook/rocksdb/issues/1303).
This commit is the fix for this, a check is been added not to delete
the log file if it is already there in the recycle list.
Test Plan:
Unit tested it and ran the similar profile. Not reproducing anymore.
Summary: In ColumnFamilyTest.FlushCloseWALFiles, there is a small window in which the flush has finished but the log writer is not yet closed, causing the assert failure. Fix it by explicitly waiting the flush job to finish.
Test Plan: Run the test many times in high parallelism.
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63423
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
Summary: The new variable introduced in 2149059f910149197d1a0f79ac08cf19465ea2d may be unitialized. Valgrind is failing because of it.
Test Plan: Run valgrind tests
Reviewers: yiwu, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63201
Summary: There's no reference to ImmutableCFOptions elsewhere in /include/rocksdb. ImmutableCFOptions was introduced in this commit (5665e5e285) but later its reference in /include/rocksdb/table.h is removed.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63177
Summary:
When ingesting multiple files
- We should use user comparator
- Should not call `cfd->current()` outside of mutex
Test Plan: unit tests
Reviewers: sdong, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63075
* Fix StatsLevel so that kExceptTimeForMutex leaves compression stats enabled and kExceptDetailedTimers disables mutex lock stats. Also change default stats level to kExceptDetailedTimers (disabling both compression and mutex timing).
* Changed order of StatsLevel enum to simplify logic for determining what stats to record.
Summary: To reduce number of options, merge source_compaction_factor, max_grandparent_overlap_bytes and expanded_compaction_factor into max_compaction_bytes.
Test Plan: Add two new unit tests. Run all existing tests, including jtest.
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59829
Summary: add prefix_seek_mode to db_iter_test to enable data race test for iterator when prefix_extractor != nullptr
Test Plan: make all check -j64
Reviewers: andrewkr, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63027
Summary: As title, make sure Prev() works as expected with Next() when the current iter->key() in the range of the same prefix in prefix seek mode
Test Plan: make all check -j64 (add prefix_test with PrefixSeekModePrev test case)
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61419
Summary:
Add ReadOptions::read_amp_bytes_per_bit option which allow us to create a bitmap for every data block we read
the bitmap will contain (block_size / read_amp_bytes_per_bit) bits.
We will use this bitmap to mark which bytes have been used of the block so we can calculate the read amplification
Test Plan: added new tests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: yiwu, leveldb, march, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58707
Summary:
After 1b8a2e8fdd, DB Pointer is passed to WriteBatchInternal::InsertInto() while DB recovery. This can cause deadlock if options.max_successive_merges hits. In that case DB::Get() will be called. Get() will try to acquire the DB mutex, which is already held by the DB::Open(), causing a deadlock condition.
This commit mitigates the problem by not passing the DB pointer unless 2PC is allowed.
Test Plan: Add a new test and run it.
Reviewers: IslamAbdelRahman, andrewkr, kradhakrishnan, horuff
Reviewed By: kradhakrishnan
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62625
Summary:
Move the manual memtable flush for databases containing data that has
bypassed the WAL from DBImpl's destructor to CancleAllBackgroundWork().
CancelAllBackgroundWork() is a publicly exposed API which allows
async operations performed by background threads to be disabled on a
database. In effect, this places the database into a "shutdown" state
in advance of calling the database object's destructor. No compactions
or flushing of SST files can occur once a call to this API completes.
When writes are issued to a database with WriteOptions::disableWAL
set to true, DBImpl::has_unpersisted_data_ is set so that
memtables can be flushed when the database object is destroyed. If
CancelAllBackgroundWork() has been called prior to DBImpl's destructor,
this flush operation is not possible and is skipped, causing unnecessary
loss of data.
Since CancelAllBackgroundWork() is already invoked by DBImpl's destructor
in order to perform the thread join portion of its cleanup processing,
moving the manual memtable flush to CancelAllBackgroundWork() ensures
data is persisted regardless of client behavior.
Test Plan:
Write an amount of data that will not cause a memtable flush to a rocksdb
database with all writes marked with WriteOptions::disableWAL. Properly
"close" the database. Reopen database and verify that the data was
persisted.
Reviewers: IslamAbdelRahman, yiwu, yoshinorim, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62277
Summary:
We've got a crash with this stack trace:
Program terminated with signal SIGTRAP, Trace/breakpoint trap.
#0 0x00007fc85f2f4009 in raise () from /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
#1 0x00000000005c8f61 in facebook::logdevice::handle_sigsegv(int) () at logdevice/server/sigsegv.cpp:159
#2 0x00007fc85f2f4150 in <signal handler called> () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
#3 0x00000000031ed80c in rocksdb::NewReadaheadRandomAccessFile() at util/file_reader_writer.cc:383
#4 0x00000000031ed80c in rocksdb::NewReadaheadRandomAccessFile() at util/file_reader_writer.cc:472
#5 0x00000000031558e7 in rocksdb::TableCache::GetTableReader() at db/table_cache.cc:99
#6 0x0000000003156329 in rocksdb::TableCache::NewIterator() at db/table_cache.cc:198
#7 0x0000000003166568 in rocksdb::VersionSet::MakeInputIterator() at db/version_set.cc:3345
#8 0x000000000324a94f in rocksdb::CompactionJob::ProcessKeyValueCompaction(rocksdb::CompactionJob::SubcompactionState*) () at db/compaction_job.cc:650
#9 0x000000000324c2f6 in rocksdb::CompactionJob::Run() () at db/compaction_job.cc:530
#10 0x00000000030f5ae5 in rocksdb::DBImpl::BackgroundCompaction() at db/db_impl.cc:3269
#11 0x0000000003108d36 in rocksdb::DBImpl::BackgroundCallCompaction(void*) () at db/db_impl.cc:2970
#12 0x00000000029a2a9a in facebook::logdevice::RocksDBEnv::callback(void*) () at logdevice/server/locallogstore/RocksDBEnv.cpp:26
#13 0x00000000029a2a9a in facebook::logdevice::RocksDBEnv::callback(void*) () at logdevice/server/locallogstore/RocksDBEnv.cpp:30
#14 0x00000000031e7521 in rocksdb::ThreadPool::BGThread() at util/threadpool.cc:230
#15 0x00000000031e7663 in rocksdb::BGThreadWrapper(void*) () at util/threadpool.cc:254
#16 0x00007fc85f2ea7f1 in start_thread () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libpthread.so.0
#17 0x00007fc85e8fb46d in clone () at /usr/local/fbcode/gcc-4.9-glibc-2.20-fb/lib/libc.so.6
From looking at the code, probably what happened is this:
- `TableCache::GetTableReader()` called `Env::NewRandomAccessFile()`, which dispatched to a `PosixEnv::NewRandomAccessFile()`, where probably an `open()` call failed, so the `NewRandomAccessFile()` left a nullptr in the resulting file,
- `TableCache::GetTableReader()` called `NewReadaheadRandomAccessFile()` with that `nullptr` file,
- it tried to call file's method and crashed.
This diff is a trivial fix to this crash.
Test Plan: `make -j check`
Reviewers: sdong, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62451
Summary:
We used to allow insert into full block cache as long as `strict_capacity_limit=false`. This diff further restrict insert to full cache if caller don't intent to hold handle to the cache entry after insert.
Hope this diff fix the assertion failure with db_stress: https://our.intern.facebook.com/intern/sandcastle/log/?instance_id=211853102&step_id=2475070014
db_stress: util/lru_cache.cc:278: virtual void rocksdb::LRUCacheShard::Release(rocksdb::Cache::Handle*): Assertion `lru_.next == &lru_' failed.
The assertion at lru_cache.cc:278 can fail when an entry is inserted into full cache and stay in LRU list.
Test Plan:
make all check
Reviewers: IslamAbdelRahman, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62325
Summary:
Add option to block based table to insert index/filter blocks to block cache with priority. Combined with LRUCache with high_pri_pool_ratio, we can reserved space for index/filter blocks, make them less likely to be evicted.
Depends on D61977.
Test Plan: See unit test.
Reviewers: lightmark, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, march, leveldb
Differential Revision: https://reviews.facebook.net/D62241
Summary: Update SstFileWriter to use user TablePropertiesCollectors that are passed in Options
Test Plan: unittests
Reviewers: sdong
Reviewed By: sdong
Subscribers: jkedgar, andrewkr, hermanlee4, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D62253
Summary: 1. Range Deletion Tombstone structure 2. Modify Add() in table_builder to make it usable for adding range del tombstones 3. Expose NewTombstoneIterator() API in table_reader
Test Plan: table_test.cc (now BlockBasedTableBuilder::Add() only accepts InternalKey. I make table_test only pass InternalKey to BlockBasedTableBuidler. Also test writing/reading range deletion tombstones in table_test )
Reviewers: sdong, IslamAbdelRahman, lightmark, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61473
Summary:
Added 2 statistics in compaction job statistics, to
identify if single deletes are not meeting a matching key
(fallthrough) or single deletes are meeting a merge, delete or
another single delete (i.e. not the expected case of put).
Test Plan: Tested the statistics using write_stress and compaction_job_stats_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61749
Summary:
Add API to WriteBatch to store range deletions in its buffer
which are later added to memtable. In the WriteBatch buffer, a range
deletion is encoded as "<optype><CF ID (optional)><begin key><end key>".
With this diff, the range tombstones are stored inline with the data in
the memtable. It's useful for now because the test cases rely on the
data being accessible via memtable. My next step is to store range
tombstones in a separate area in the memtable.
Test Plan: unit tests
Reviewers: IslamAbdelRahman, sdong, wanning
Reviewed By: wanning
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61401
Summary: Fix the test by releasing the last snapshot
Test Plan: run the test under valgrind
Reviewers: andrewkr, yiwu, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62091
Summary: "Batch" is ambiguous in this context. It can mean "write batch" or commit group. Change it to commit group to be clear.
Test Plan: Build
Reviewers: MarkCallaghan, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62055
Summary:
This diff update ForwardIterator to support pinning keys and values, which will allow DBIter to take advantage of that and eliminate memcpy when executing merge operators
This diff is stacked on D61305
Test Plan:
existing tests (updated them to test tailing iterator)
new test
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60009
Summary:
This diff include these simple change
- Rename ReleasePinnedIterators to ReleasePinnedData
- Rename PinIteratorIfNeeded to PinIterator
- Use std::vector directly in PinnedIteratorsManager instead of std::unique_ptr<std::vector>
- Generalize PinnedIteratorsManager by adding PinPtr which can pin any pointer
Test Plan: existing tests
Reviewers: sdong, yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61305
Summary: Background sleeping tasks may conflict with test cleaning up. Wait for the sleeping tasks to finish before ending the test.
Test Plan: Run these tests.
Reviewers: andrewkr, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61827
Summary: With read_options.background_purge_on_iterator_cleanup=true, File deletion and closing can still happen in forward iterator, or WAL file closing. Cover those cases too.
Test Plan: I am adding unit tests.
Reviewers: andrewkr, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61503
Summary:
If we have total number of sorted runs greater than level0_file_num_compaction_trigger, Universal compaction will always issue a compaction
even if the number of sorted runs that are not being compacted is less than level0_file_num_compaction_trigger.
This diff changes this behaviour to relay on the `number of sorted runs not being compacted` instead of `total number of sorted runs`
Test Plan: New unit test
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61533
* Added check_snapshot option in the DB's AddFile function
* change check_snapshot to skip_snapshot_check
* add unit test for skip_snapshot_check
* Add skip_snapshot_check comment
Summary: Explicitly flush two times to generate two sst files.
Test Plan: run the test.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61671
Summary: The test `ObsoleteFiles` failed occasionally on slow device. This problem appears on Travis CI several times. The reason is that we did not wait until compaction jobs are finished in the test, while in slower device the background jobs take longer time to finish.
Test Plan: Pass existing tests.
Reviewers: yiwu, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61479
Summary:
My understanding is that the purpose of write stall triggers are to wait for auto-compaction to catch up. Without auto-compaction, we don't need to stall writes.
Also with this diff, flush/compaction conditions are recalculated on dynamic option change. Previously the conditions are recalculate only when write stall options are changed.
Test Plan: See the new test. Removed two tests that are no longer valid.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61437
Summary:
patch for diff https://reviews.facebook.net/D58587
Also change StopWatch class to add a fifth param named overwrite which decides whether to overwrite *elapse or add on it.
Test Plan: make all check -j64
Reviewers: sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61239
Summary: MyRocks is adding support for the user of the SstFileWriter which needs a comparator. It would be more convenient to get the comparator from the column family (which already has to have it) than to have caller keep track of it.
Test Plan: Standard tests (adding one for the new method)
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61155
Summary:
DBTest.CompressionStatsTest on non_shm test where the storage device is slow
DBTest.CompressionStatsTest assumes that a flush happens to check the number of compressed blocks.
This is not always true if the Flush is slow, make the test more deterministic by forcing a flush before doing the check
Test Plan: Run the test locally
Reviewers: andrewkr, yiwu, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61317
Summary: regression tests to make sure seek keys not in domain would not fail assertion
Test Plan:
```
[gzh@dev6163.prn2 ~/local/rocksdb] ./prefix_test --gtest_filter=SamePrefixTest.*
/tmp/rocksdbtest-112628/prefix_test
Note: Google Test filter = SamePrefixTest.*
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from SamePrefixTest
[ RUN ] SamePrefixTest.InDomainTest
[ OK ] SamePrefixTest.InDomainTest (211 ms)
[----------] 1 test from SamePrefixTest (211 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (211 ms total)
```
Reviewers: andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61161
Summary: Extend the option memtable_prefix_bloom_huge_page_tlb_size from just putting memtable bloom filter to huge page to memtable itself too.
Test Plan: Run all existing tests.
Reviewers: IslamAbdelRahman, yhchiang, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60513
Summary: We may wrongly drop delete operation if we pick a file with the entry to be delete, the put entry of the same user key is in the next file in the level, and the next file is not picked. We expand compaction inputs for output level too.
Test Plan: Add unit tests that reproduct the bug of dropping delete entry. Change compaction_picker_test to assert the new behavior.
Reviewers: IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61173
Summary: old typos with FILTER/INDEX_CACHE
Test Plan: still pass this unit test
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61185
Summary:
MergeContext::copied_operands contain strings that MergeContext::operand_list_ Slices point to
It's possible that when MergeContext::copied_operands grow, these strings are moved and there place in memory is changed, this will cause MergeContext::operand_list_ to point to invalid memory.
fix this problem by using unique_ptr<string> instead of string
Test Plan: run tests under mac/clang
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61023
Summary: The test is flaky on Travis in osx environment. The background flush the test wanting to block can run behind the L2 manual compaction, making the test actually blocking the L2 compaction and won't able to proceed.
Test Plan: Test run on travis
Reviewers: kradhakrishnan, sdong, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61101
Summary: RocksDB lite don't support dynamic options. Disable the two test from lite build, and assert `SetOptions` should return `status::OK`.
Test Plan: Run the db_options test under lite build and normal build.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61119
Summary:
Stale log files can be deleted out of order. This can happen for various reasons. One of the reason is that no data is ever inserted to a column family and we have an optimization to update its log number, but not all the old log files are cleaned up (the case shown in the unit tests added). It can also happen when we simply delete multiple log files out of order.
This causes data corruption because we simply increase seqID after processing the next row and we may end up with writing data with smaller seqID than what is already flushed to memtables.
In DB recovery, for the oldest files we are replaying, if there it contains no data for any column family, we ignore the sequence IDs in the file.
Test Plan: Add two unit tests that fail without the fix.
Reviewers: IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, yoshinorim, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60891
Summary: Multiput atomiciy is broken across multiple column families if we don't sync WAL before flushing one column family. The WAL file may contain a write batch containing writes to a key to the CF to be flushed and a key to other CF. If we don't sync WAL before flushing, if machine crashes after flushing, the write batch will only be partial recovered. Data to other CFs are lost.
Test Plan: Add a new unit test which will fail without the diff.
Reviewers: yhchiang, IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: yiwu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60915
Summary: Comment out assertion of number of table files from lite build.
Test Plan:
OPT=-DROCKSDB_LITE make check
Reviewers: lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60999
Summary:
Fix flush not being commit while writing manifest, which is a recent bug introduced by D60075.
The issue:
# Options.max_background_flushes > 1
# Background thread A pick up a flush job, flush, then commit to manifest. (Note that mutex is released before writing manifest.)
# Background thread B pick up another flush job, flush. When it gets to `MemTableList::InstallMemtableFlushResults`, it notices another thread is commiting, so it quit.
# After the first commit, thread A doesn't double check if there are more flush result need to commit, leaving the second flush uncommitted.
Test Plan: run the test. Also verify the new test hit deadlock without the fix.
Reviewers: sdong, igor, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, omegaga, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60969
* Replace %zu format specifier with Windows-compatible macro 'ROCKSDB_PRIszt'
* Added "port/port.h" include to sim_cache.cc for call to snprintf().
* Applied cleaner fix to windows build, reverting part of 7bedd94
Summary: In T8216281 we decided to disable prefetching the index and filter during opening table handlers during startup (max_open_files = -1).
Test Plan: Rely on `IndexAndFilterBlocksOfNewTableAddedToCache` to guarantee L0 indexes and filters are still cached and change `PinL0IndexAndFilterBlocksTest` to make sure other levels are not cached (maybe add one more test to test we don't cache other levels?)
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59913
