Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
In the write path, there is an optimization: when a new WAL is created during SwitchMemtable, we update the internal log number of the empty column families to the new WAL. `FindObsoleteFiles` marks a WAL as obsolete if the WAL's log number is less than `VersionSet::MinLogNumberWithUnflushedData`. After updating the empty column families' internal log number, `VersionSet::MinLogNumberWithUnflushedData` might change, so some WALs might become obsolete to be purged from disk.
For example, consider there are 3 column families: 0, 1, 2:
1. initially, all the column families' log number is 1;
2. write some data to cf0, and flush cf0, but the flush is pending;
3. now a new WAL 2 is created;
4. write data to cf1 and WAL 2, now cf0's log number is 1, cf1's log number is 2, cf2's log number is 2 (because cf1 and cf2 are empty, so their log numbers will be set to the highest log number);
5. now cf0's flush hasn't finished, flush cf1, a new WAL 3 is created, and cf1's flush finishes, now cf0's log number is 1, cf1's log number is 3, cf2's log number is 3, since WAL 1 still contains data for the unflushed cf0, no WAL can be deleted from disk;
6. now cf0's flush finishes, cf0's log number is 2 (because when cf0 was switching memtable, WAL 3 does not exist yet), cf1's log number is 3, cf2's log number is 3, so WAL 1 can be purged from disk now, but WAL 2 still cannot because `MinLogNumberToKeep()` is 2;
7. write data to cf2 and WAL 3, because cf0 is empty, its log number is updated to 3, so now cf0's log number is 3, cf1's log number is 3, cf2's log number is 3;
8. now if the background threads want to purge obsolete files from disk, WAL 2 can be purged because `MinLogNumberToKeep()` is 3. But there are only two flush results written to MANIFEST: the first is for flushing cf1, and the `MinLogNumberToKeep` is 1, the second is for flushing cf0, and the `MinLogNumberToKeep` is 2. So without this PR, if the DB crashes at this point and try to recover, `WalSet` will still expect WAL 2 to exist.
When WAL tracking is enabled, we assume WALs will only become obsolete after a flush result is written to MANIFEST in `MemtableList::TryInstallMemtableFlushResults` (or its atomic flush counterpart). The above situation breaks this assumption.
This PR tracks WAL obsoletion if necessary before updating the empty column families' log numbers.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7781
Test Plan:
watch existing tests and stress tests to pass.
`make -j48 blackbox_crash_test` on devserver
Reviewed By: ltamasi
Differential Revision: D25631695
Pulled By: cheng-chang
fbshipit-source-id: ca7fff967bdb42204b84226063d909893bc0a4ec
Summary:
This change eliminates the need for a lot of the PermitUncheckedError calls on return from ErrorHandler methods. The calls are no longer needed as the status is returned as a reference rather than a copy. Additionally, this means that the originating status (recovery_error_, bg_error_) is not cleared implicitly as a result of calling one of these methods.
For this class, I do not know if the proper behavior should be to call PermitUncheckedError in the destructor or if the checked state should be cleared when the status is cleared. I did tests both ways. Without the code in the destructor, the status will need to be cleared in at least some of the places where it is set to OK. When running tests, I found no instances where this class was destructed with a non-OK, non-checked Status.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7539
Reviewed By: anand1976
Differential Revision: D25340565
Pulled By: pdillinger
fbshipit-source-id: 1730c035c81a475875ea745226112030ec25136c
Summary:
https://github.com/facebook/rocksdb/issues/7340 reports and reproduces an assertion failure caused by a combination of the following:
- atomic flush is disabled.
- a column family can appear multiple times in the flush queue at the same time. This behavior was introduced in release 5.17.
Consequently, it is possible that two flushes race with each other. One bg flush thread flushes all memtables. The other thread calls `FlushMemTableToOutputFile()` afterwards, and hits the assertion error below.
```
assert(cfd->imm()->NumNotFlushed() != 0);
assert(cfd->imm()->IsFlushPending());
```
Fix this by reverting the behavior. In non-atomic-flush case, a column family can appear in the flush queue at most once at the same time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7362
Test Plan:
make check
Also run stress test successfully for 10 times.
```
make crash_test
```
Reviewed By: ajkr
Differential Revision: D25172996
Pulled By: riversand963
fbshipit-source-id: f1559b6366cc609e961e3fc83fae548f1fad08ce
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
`BeginWriteStall()` removes no_slowdown write from the write
list and updates `link_newer`, which makes `CreateMissingNewerLinks()`
thought all write list has valid `link_newer` and failed to create link
for all writers.
It caused flaky test and SegFault for release build.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7508
Test Plan: Add unittest to reproduce the issue.
Reviewed By: anand1976
Differential Revision: D24126601
Pulled By: jay-zhuang
fbshipit-source-id: f8ac5dba653f7ee1b0950296427d4f5f8ee34a06
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452
Test Plan: See CI tests pass.
Reviewed By: zhichao-cao
Differential Revision: D23979764
fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
Summary:
In a distributed file system, directory ownership is enforced by fencing
off the previous owner once they've been preempted by a new owner. This
PR adds a IOStatus subcode for ```StatusCode::IOError``` to indicate this.
Once this error is returned for a file write, the DB is put in read-only
mode and not allowed to resume in read-write mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7374
Test Plan: Add new unit tests in ```error_handler_fs_test```
Reviewed By: riversand963
Differential Revision: D23687777
Pulled By: anand1976
fbshipit-source-id: bef948642089dc0af399057864d9a8ca339e8b2f
Summary:
When a memtable is trimmed in MemTableListVersion, the memtable
is only added to delete list if it is
the last reference. However it is not the last reference as it is held
by the super version. But the super version would not be switched if the
delete list is empty. So the memtable is never destroyed and memory
usage increases beyond write_buffer_size +
max_write_buffer_size_to_maintain.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7296
Test Plan:
1. ./db_bench -benchmarks=randomtransaction
-optimistic_transaction_db=1 -statistics -stats_interval_seconds=1
-duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000
--transaction_set_snapshot
Reviewed By: ltamasi
Differential Revision: D23267395
Pulled By: akankshamahajan15
fbshipit-source-id: 3a8d437fe9f4015f851ff84c0e29528aa946b650
Summary:
Pointed out by https://github.com/facebook/rocksdb/issues/7197 , there is a double lock in WriteImplWALOnly.
Also find another deadlock in UnorderedWriteMemtable. Move the check after switch_all_.notify_all().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7199
Test Plan: pass make check
Reviewed By: anand1976
Differential Revision: D22961714
Pulled By: zhichao-cao
fbshipit-source-id: 0707922dc50d28ea141a15a8cdcbd1c8993ea0d8
Summary:
In current codebase, in write path, if Retryable IO Error happens, SetBGError is called. The retryable IO Error is converted to hard error and DB is in read only mode. User or application needs to resume it. In this PR, if Retryable IO Error happens in one DB, SetBGError will create a new thread to call Resume (auto resume). otpions.max_bgerror_resume_count controls if auto resume is enabled or not (if max_bgerror_resume_count<=0, auto resume will not be enabled). options.bgerror_resume_retry_interval controls the time interval to call Resume again if the previous resume fails due to the Retryable IO Error. If non-retryable error happens during resume, auto resume will terminate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6765
Test Plan: Added the unit test cases in error_handler_fs_test and pass make asan_check
Reviewed By: anand1976
Differential Revision: D21916789
Pulled By: zhichao-cao
fbshipit-source-id: acb8b5e5dc3167adfa9425a5b7fc104f6b95cb0b
Summary:
Preliminary user-timestamp support for delete.
If ["a", ts=100] exists, you can delete it by calling `DB::Delete(write_options, key)` in which `write_options.timestamp` points to a `ts` higher than 100.
Implementation
A new ValueType, i.e. `kTypeDeletionWithTimestamp` is added for deletion marker with timestamp.
The reason for a separate `kTypeDeletionWithTimestamp`: RocksDB may drop tombstones (keys with kTypeDeletion) when compacting them to the bottom level. This is OK and useful if timestamp is disabled. When timestamp is enabled, should we still reuse `kTypeDeletion`, we may drop the tombstone with a more recent timestamp, causing deleted keys to re-appear.
Test plan (dev server)
```
make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6253
Reviewed By: ltamasi
Differential Revision: D20995328
Pulled By: riversand963
fbshipit-source-id: a9e5c22968ad76f98e3dc6ee0151265a3f0df619
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.
The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487
Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check
Reviewed By: anand1976
Differential Revision: D20685017
Pulled By: zhichao-cao
fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
Summary:
In the current code base, we can use Directory from Env to manage directory (e.g, Fsync()). The PR https://github.com/facebook/rocksdb/issues/5761 introduce the File System as a new Env API. So we further replace the Directory class in DB with FSDirectory such that we can have more IO information from IOStatus returned by FSDirectory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6468
Test Plan: pass make asan_check
Differential Revision: D20195261
Pulled By: zhichao-cao
fbshipit-source-id: 93962cb9436852bfcfb76e086d9e7babd461cbe1
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
We were removing the file from `log_recycle_files_` before renaming it
with `ReuseWritableFile()`. Since `ReuseWritableFile()` occurs outside
the DB mutex, it was possible for a concurrent full purge to sneak in
and delete the file before it could be renamed. Consequently, `SwitchMemtable()`
would fail and the DB would enter read-only mode.
The fix is to hold the old file number in `log_recycle_files_` until
after the file has been renamed. Full purge uses that list to decide
which files to keep, so it can no longer delete a file pending recycling.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5900
Test Plan: new unit test
Differential Revision: D19771719
Pulled By: ajkr
fbshipit-source-id: 094346349ca3fb499712e62de03905acc30b5ce8
Summary:
When `no_slowdown` is enabled, it returns `Status::Incomplete("Write stall")` if a stall would occur. This patch adds descriptive text for when `no_slowdown` and `low_pri` are enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6396
Differential Revision: D19808978
Pulled By: cheng-chang
fbshipit-source-id: a53b0d25ed414c821a086531e0222027f925e627
Summary:
It chooses the oldest memtable, not the largest one. This is an
important difference for users whose CFs receive non-uniform write
rates.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6335
Differential Revision: D19588865
Pulled By: maysamyabandeh
fbshipit-source-id: 62ad4325b0182f5f27858584cd73fd5978fb2cec
Summary:
We have observed an increase in CPU load caused by frequent calls to
`ColumnFamilyData::InstallSuperVersion` from `DBImpl::TrimMemtableHistory`
when using `max_write_buffer_size_to_maintain` to limit the amount of
memtable history maintained for transaction conflict checking. As it turns out,
this is caused by the code creating and installing a new `SuperVersion` even if
no memtables were actually trimmed. The patch adds a check to avoid this.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6169
Test Plan:
Compared `perf` output for
```
./db_bench -benchmarks=randomtransaction -optimistic_transaction_db=1 -statistics -stats_interval_seconds=1 -duration=90 -num=500000 --max_write_buffer_size_to_maintain=16000000 --transaction_set_snapshot=1 --threads=32
```
before and after the change. With the fix, the call chain `rocksdb::DBImpl::TrimMemtableHistory` ->
`rocksdb::ColumnFamilyData::InstallSuperVersion` -> `rocksdb::ThreadLocalPtr::StaticMeta::Scrape`
no longer registers in the `perf` report.
Differential Revision: D19031509
Pulled By: ltamasi
fbshipit-source-id: 02686fce594e5b50eba0710e4b28a9b808c8aa20
Summary:
It's easy to cause coredump when closing ColumnFamilyHandle with unreleased iterators, especially iterators release is controlled by java GC when using JNI.
This patch fixed concurrent CF iteration and drop, we let iterators(actually SuperVersion) hold a ColumnFamilyData reference to prevent the CF from being released too early.
fixed https://github.com/facebook/rocksdb/issues/5982
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6147
Differential Revision: D18926378
fbshipit-source-id: 1dff6d068c603d012b81446812368bfee95a5e15
Summary:
**Summary:**
This PR fixes two unordered_write related issues:
- ingestion job may skip the necessary memtable flush https://github.com/facebook/rocksdb/issues/6026
- compact range may cause memtable is flushed before pending unordered write finished
1. `CompactRange` triggers memtable flush but doesn't wait for pending-writes
2. there are some pending writes but memtable is already flushed
3. the memtable related WAL is removed( note that the pending-writes were recorded in that WAL).
4. pending-writes write to newer created memtable
5. there is a restart
6. missing the previous pending-writes because WAL is removed but they aren't included in SST.
**How to solve:**
- Wait pending memtable writes before ingestion job check memtable key range
- Wait pending memtable writes before flush memtable.
**Note that: `CompactRange` calls `RangesOverlapWithMemtables` too without waiting for pending waits, but I'm not sure whether it affects the correctness.**
**Test Plan:**
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6113
Differential Revision: D18895674
Pulled By: maysamyabandeh
fbshipit-source-id: da22b4476fc7e06c176020e7cc171eb78189ecaf
Summary:
When two_write_queue enable, IngestExternalFile performs EnterUnbatched on both write queues. SwitchMemtable also EnterUnbatched on 2nd write queue when this option is enabled. When the call stack includes IngestExternalFile -> FlushMemTable -> SwitchMemtable, this results into a deadlock.
The implemented solution is to pass on the existing writes_stopped argument in FlushMemTable to skip EnterUnbatched in SwitchMemtable.
Fixes https://github.com/facebook/rocksdb/issues/5974
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5976
Differential Revision: D18535943
Pulled By: maysamyabandeh
fbshipit-source-id: a4f9d4964c10d4a7ca06b1e0102ca2ec395512bc
Summary:
In pipeline writing mode, memtable switching needs to wait for memtable writing to finish to make sure that when memtables are made immutable, inserts are not going to them. This is currently done in DBImpl::SwitchMemtable(). This is done after flush_scheduler_.TakeNextColumnFamily() is called to fetch the list of column families to switch. The function flush_scheduler_.TakeNextColumnFamily() itself, however, is not thread-safe when being called together with flush_scheduler_.ScheduleFlush().
This change provides a fix, which moves the waiting logic before flush_scheduler_.TakeNextColumnFamily(). WaitForPendingWrites() is a natural place where the logic can happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5716
Test Plan: Run all tests with ASAN and TSAN.
Differential Revision: D18217658
fbshipit-source-id: b9c5e765c9989645bf10afda7c5c726c3f82f6c3
Summary:
When building with clang 9, warning is reported for InternalDBStatsType type names shadowed the one for statistics. Rename them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5779
Test Plan: Build with clang 9 and see it passes.
Differential Revision: D17239378
fbshipit-source-id: af28fb42066c738cd1b841f9fe21ab4671dafd18
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
In previous https://github.com/facebook/rocksdb/issues/5079, we added user-specified timestamp to `DB::Get()` and `DB::Put()`. Limitation is that these two functions may cause extra memory allocation and key copy. The reason is that `WriteBatch` does not allocate extra memory for timestamps because it is not aware of timestamp size, and we did not provide an API to assign/update timestamp of each key within a `WriteBatch`.
We address these issues in this PR by doing the following.
1. Add a `timestamp_size_` to `WriteBatch` so that `WriteBatch` can take timestamps into account when calling `WriteBatch::Put`, `WriteBatch::Delete`, etc.
2. Add APIs `WriteBatch::AssignTimestamp` and `WriteBatch::AssignTimestamps` so that application can assign/update timestamps for each key in a `WriteBatch`.
3. Avoid key copy in `GetImpl` by adding new constructor to `LookupKey`.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
If the API extension looks good, I will add more unit tests.
Some simple benchmark using db_bench.
```
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000 -disable_wal=true
```
Master is at a78503bd6c.
```
| | readrandom | fillrandom |
| master | 15.53 MB/s | 25.97 MB/s |
| PR5502 | 16.70 MB/s | 25.80 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5502
Differential Revision: D16340894
Pulled By: riversand963
fbshipit-source-id: 51132cf792be07d1efc3ac33f5768c4ee2608bb8
Summary:
There are a number of fixes in this PR (with most bugs found via the added stress tests):
1. Re-enable reseek optimization. This was initially disabled to avoid infinite loops in https://github.com/facebook/rocksdb/pull/3955 but this can be resolved by remembering not to reseek after a reseek has already been done. This problem only affects forward iteration in `DBIter::FindNextUserEntryInternal`, as we already disable reseeking in `DBIter::FindValueForCurrentKeyUsingSeek`.
2. Verify that ReadOption.snapshot can be safely used for iterator creation. Some snapshots would not give correct results because snaphsot validation would not be enforced, breaking some assumptions in Prev() iteration.
3. In the non-snapshot Get() case, reads done at `LastPublishedSequence` may not be enough, because unprepared sequence numbers are not published. Use `std::max(published_seq, max_visible_seq)` to do lookups instead.
4. Add stress test to test reading own writes.
5. Minor bug in the allow_concurrent_memtable_write case where we forgot to pass in batch_per_txn_.
6. Minor performance optimization in `CalcMaxUnpreparedSequenceNumber` by assigning by reference instead of value.
7. Add some more comments everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5573
Differential Revision: D16276089
Pulled By: lth
fbshipit-source-id: 18029c944eb427a90a87dee76ac1b23f37ec1ccb
Summary:
WAL records RocksDB writes to all column families. When user flushes a a column family, the old WAL will not accept new writes but cannot be deleted yet because it may still contain live data for other column families. (See https://github.com/facebook/rocksdb/wiki/Write-Ahead-Log#life-cycle-of-a-wal for detailed explanation)
Because of this, if there is a column family that receive very infrequent writes and no manual flush is called for it, it could prevent a lot of WALs from being deleted. PR https://github.com/facebook/rocksdb/pull/5046 introduced persistent stats column family which is a good example of such column families. Depending on the config, it may have long intervals between writes, and user is unaware of it which makes it difficult to call manual flush for it.
This PR addresses the problem for persistent stats column family by forcing a flush for persistent stats column family when 1) another column family is flushed 2) persistent stats column family's log number is the smallest among all column families, this way persistent stats column family will keep advancing its log number when necessary, allowing RocksDB to delete old WAL files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5509
Differential Revision: D16045896
Pulled By: miasantreble
fbshipit-source-id: 286837b633e988417f0096ff38384742d3b40ef4
Summary:
The patch reduces the contention over prepared_mutex_ using these techniques:
1) Move ::RemovePrepared() to be called from the commit callback when we have two write queues.
2) Use two separate mutex for PreparedHeap, one prepared_mutex_ needed for ::RemovePrepared, and one ::push_pop_mutex() needed for ::AddPrepared(). Given that we call ::AddPrepared only from the first write queue and ::RemovePrepared mostly from the 2nd, this will result into each the two write queues not competing with each other over a single mutex. ::RemovePrepared might occasionally need to acquire ::push_pop_mutex() if ::erase() ends up with calling ::pop()
3) Acquire ::push_pop_mutex() on the first callback of the write queue and release it on the last.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5420
Differential Revision: D15741985
Pulled By: maysamyabandeh
fbshipit-source-id: 84ce8016007e88bb6e10da5760ba1f0d26347735
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
It's useful to be able to (optionally) associate key-value pairs with user-provided timestamps. This PR is an early effort towards this goal and continues the work of facebook#4942. A suite of new unit tests exist in DBBasicTestWithTimestampWithParam. Support for timestamp requires the user to provide timestamp as a slice in `ReadOptions` and `WriteOptions`. All timestamps of the same database must share the same length, format, etc. The format of the timestamp is the same throughout the same database, and the user is responsible for providing a comparator function (Comparator) to order the <key, timestamp> tuples. Once created, the format and length of the timestamp cannot change (at least for now).
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
All tests must pass.
We also run the following db_bench tests to verify whether there is regression on Get/Put while timestamp is not enabled.
```
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000
```
Repeat for 6 times for both versions.
Results are as follows:
```
| | readrandom | fillrandom |
| master | 16.77 MB/s | 47.05 MB/s |
| PR5079 | 16.44 MB/s | 47.03 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5079
Differential Revision: D15132946
Pulled By: riversand963
fbshipit-source-id: 833a0d657eac21182f0f206c910a6438154c742c