Summary:
D51183 was reverted due to breaking the LITE build.
This diff is the same as D51183 but with a fix for the LITE BUILD(D51693)
Test Plan: run all unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51711
Summary:
D50475 enables using SST files for transaction write-conflict checking. In order for this to work, we need to make sure not to compact out SingleDeletes when there is an earlier transaction snapshot(D50295). If there is a long-held snapshot, this could reduce the benefit of the SingleDelete optimization.
This diff allows Transactions to mark snapshots as being used for write-conflict checking. Then, during compaction, we will be able to optimize SingleDeletes better in the future.
This diff adds a flag to SnapshotImpl which is used by Transactions. This diff also passes the earliest write-conflict snapshot's sequence number to CompactionIterator. This diff does not actually change Compaction (after this diff is pushed, D50295 will be able to use this information).
Test Plan: no behavior change, ran existing tests
Reviewers: rven, kradhakrishnan, yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51183
Summary: When SetSnapshot() is used the caller immediately knows a snapshot has been created, but when SetSnapshotOnNextOperation() is used the caller needs a way to get notified when that snapshot has been generated. This creates an interface that the client can implement that will be called at the time the snapshot is created.
Test Plan: Added a new SetSnapshotOnNextOperationWithNotification test into the transaction_test.
Reviewers: sdong, anthony
Reviewed By: anthony
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51177
Summary:
Fixes T8781168.
Added a new function EnableAutoCompactions in db.h to be publicly
avialable. This allows compaction to be re-enabled after disabling it via
SetOptions
Refactored code to set the dbptr earlier on in TransactionDB::Open and DB::Open
Temporarily disable auto_compaction in TransactionDB::Open until dbptr is set to
prevent race condition.
Test Plan:
Ran make all check
verified fix on myrocks side:
was able to reproduce the seg fault with
../tools/mysqltest.sh --mem --force rocksdb.drop_table
method was to manually sleep the thread after DB::Open but before TransactionDB ptr was
assigned in transaction_db_impl.cc:
DB::Open(db_options, dbname, column_families_copy, handles, &db);
clock_t goal = (60000 * 10) + clock();
while (goal > clock());
...dbptr(aka rdb) gets assigned below
verified my changes fixed the issue.
Also added unit test 'ToggleAutoCompaction' in transaction_test.cc
Reviewers: hermanlee4, anthony
Reviewed By: anthony
Subscribers: alex, dhruba
Differential Revision: https://reviews.facebook.net/D51147
Summary: Getting file size from all the backup files can take a long time. In some cases, the sizes are available in file names. We allow a mode to get those sizes from file name.
Test Plan:
Make some unit tests in backupable_db_test to run in such a mode.
Make sure RocksDB Lite builds too.
Reviewers: IslamAbdelRahman, rven, yhchiang, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: muthu, asameet, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51243
* conversion from 'size_t' to 'type', by add static_cast
Tested:
* by build solution on Windows, Linux locally,
* run tests
* build CI system successful
Summary:
The commit of option helper refactor broken the build:
(1) a git merge problem
(2) some uncaught compiler warning
Fix it.
Test Plan: Make sure "make all" passes
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D50943
Summary:
Add CheckOptionsCompatibility() API to options_util that returns
Status::OK if the input DBOptions and ColumnFamilyDescriptors
are compatible with the latest options stored in the specified DB path.
Test Plan: Added tests in options_util_test
Reviewers: igor, anthony, IslamAbdelRahman, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50649
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
Summary:
This patch allows rocksdb to persist options into a file on
DB::Open, SetOptions, and Create / Drop ColumnFamily.
Options files are created under the same directory as the rocksdb
instance.
In addition, this patch also adds a fail_if_missing_options_file in DBOptions
that makes any function call return non-ok status when it is not able to
persist options properly.
// If true, then DB::Open / CreateColumnFamily / DropColumnFamily
// / SetOptions will fail if options file is not detected or properly
// persisted.
//
// DEFAULT: false
bool fail_if_missing_options_file;
Options file names are formatted as OPTIONS-<number>, and RocksDB
will always keep the latest two options files.
Test Plan:
Add options_file_test.
options_test
column_family_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48285
Summary:
Valgrind reports an issue with the test for GeoIterator.
This diff explicitly deletes the two iterators used in this test.
Test Plan: This diff is for a test. The test still passes.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50193
Summary:
Fixed the following compile error in RocksDBLite:
18:00:33 CC utilities/memory/memory_test.o
18:00:33 utilities/memory/memory_test.cc: In function ‘int main(int, char**)’:
18:00:33 utilities/memory/memory_test.cc:268:66: error: ‘printf’ was not declared in this scope
18:00:33 printf("Skipped in RocksDBLite as utilities are not supported.");
18:00:33 ^
Test Plan: make OPT=-DROCKSDB_LITE memory_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50145
Summary:
This patch introduces utilities/memory, which currently includes
GetApproximateMemoryUsageByType that reports different types of
rocksdb memory usage given a list of input DBs.
The API also take care of the case where Cache could be shared
across multiple column families / multiple db instances.
Currently, it reports memory usage of memtable, table-readers
and cache.
Test Plan: utilities/memory/memory_test.cc
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49257
Summary:
This diff is a first step towards an iterator based interface for the
SearchRadial method which replaces a vector of GeoObjects with an
iterator for GeoObjects. This diff works by just wrapping the iterator
for the encapsulated vector of GeoObjects. A future diff could extend
this approach by defining an interator in terms of the underlying
iteration in SearchRadial which would then remove the need to have
an in-memory representation for all the matching GeoObjects.
Fixes T8421387
Test Plan:
The existing tests have been modified to work with the new
interface.
Reviewers: IslamAbdelRahman, kradhakrishnan, dhruba, igor
Reviewed By: igor
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50031
Summary:
CreateLoggerFromOptions have some parameters like db_log_dir and env, these parameters are redundant since they already exist in DBOptions
this patch remove the redundant parameters and expose CreateLoggerFromOptions to users
Test Plan: make check
Reviewers: igor, anthony, yhchiang, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D49713
Summary:
MyRocks needs the ability to clear a snapshot for Read Committed support
Test Plan: transaction_test
Reviewers: anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48861
Summary: Support for Transaction::CreateSnapshotOnNextOperation(). This is to fix a write-conflict race-condition that Yoshinori was running into when testing MyRocks with LinkBench.
Test Plan: New tests
Reviewers: yhchiang, spetrunia, rven, igor, yoshinorim, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48099
Summary:
MyRocks reported some perfomance issues when inserting many keys into a transaction due to the cost of inserting new keys into WriteBatchWithIndex. Frequently, they don't even need the keys to be indexed as they don't need to read them back. DisableIndexing() can be used to avoid the cost of indexing.
I also plan on eventually investigating if we can improve WriteBatchWithIndex performance. But even if we improved the perf here, it is still beneficial to be able to disable the indexing all together for large transactions.
Test Plan: unit test
Reviewers: igor, rven, yoshinorim, spetrunia, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48471
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary:
WriteBatchWithIndex::GetFromBatchAndDB only works correctly for overwrite_key=false. Transactions use overwrite_key=true (since WriteBatchWithIndex::GetIteratorWithBase only works when overwrite_key=true). So currently, Transactions could return incorrectly merged results when calling Get/GetForUpdate().
Until a permanent fix can be put in place, Transaction::Get[ForUpdate] and WriteBatchWithIndex::GetFromBatch[AndDB] will now return MergeInProgress if the most recent write to a key in the batch is a Merge.
Test Plan: more tests
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47817
Summary: Should have used auto& instead of auto. Also needed to change the code a bit due to const correctness.
Test Plan: unit tests
Reviewers: sdong, igor, yoshinorim, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47787
Summary: Transactional SingleDelete is needed for MyRocks. Note: This diff requires D47529.
Test Plan: Added some new tests in this diff as well as more tests added in D47529
Reviewers: rven, sdong, igor, yhchiang
Reviewed By: yhchiang
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47535
Summary: Fixed some bugs in using SingleDelete on a WriteBatchWithIndex and added some tests.
Test Plan: new tests
Reviewers: sdong, yhchiang, rven, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47529
Summary: FailOverwritingBackups has unexpected results when auto-compaction runs.
Test Plan: ran test a bunch of times
Reviewers: IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47181
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
In case of huge db backup infromation about progress of downloading would help.
New callback parameter in CreateNewBackup() function will trigger whenever a some amount of data downloaded.
Task: 8057631
Test Plan:
ProgressCallbackDuringBackup test that cover new functionality added to BackupableDBTest tests.
other test succeed as well.
Reviewers: Guenena, benj, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46575
Summary: Transaction::RollbackToSavePoint() will now release any locks that were taken since the previous SavePoint. To do this cleanly, I moved tracked_keys_ management into TransactionBase.
Test Plan: New Transaction test.
Reviewers: igor, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, spetrunia, leveldb
Differential Revision: https://reviews.facebook.net/D46761
Summary: Added funtions to fetch the number of locked keys in a transaction, the number of pending puts/merge/deletes, and the elapsed time
Test Plan: unit tests
Reviewers: yoshinorim, jkedgar, rven, sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45417
Summary:
Prototype of API to allow MyRocks to override default Mutex/CondVar used by transactions with their own implementations. They would simply need to pass their own implementations of Mutex/CondVar to the templated TransactionDB::Open().
Default implementation of TransactionDBMutex/TransactionDBCondVar provided (but the code is not currently changed to use this).
Let me know if this API makes sense or if it should be changed
Test Plan: n/a
Reviewers: yhchiang, rven, igor, sdong, spetrunia
Reviewed By: spetrunia
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43761
Summary:
In some cases, equality comparisons can be done more efficiently than three-way
comparisons. There are quite a few places in the code where we only care about
equality. This patch adds an Equal() method that defaults to using the
Compare() method.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, igor, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46233
Summary: This diff adds a verifyBackup method to BackupEngine. The method verifies the name and size of each file in the backup.
Test Plan: Unit test cases created and passing.
Reviewers: igor, benj
Subscribers: zelaine.fong, yhchiang, sdong, lgalanis, dhruba, AaronFeldman
Differential Revision: https://reviews.facebook.net/D46029
Summary: BackupRateLimiter removed and uses replaced with the existing GenericRateLimiter
Test Plan:
make all check
make clean
USE_CLANG=1 make all
make clean
OPT=-DROCKSDB_LITE make release
Reviewers: leveldb, igor
Reviewed By: igor
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D46095
Summary: MyRocks wants to be able to change the lock timeout of a transaction that has already started. Expose existing SetLockTimeout function to users.
Test Plan: unit test
Reviewers: spetrunia, rven, sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45987
Summary:
This diff is a collection of cleanups that were initially part of D43179.
Additionally it adds a unified way of defining key-value maps that use a
Comparator for sorting (this was previously implemented in four different
places).
Test Plan: make clean check all
Reviewers: rven, anthony, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45993
Summary:
In the first implementation of BackupEngine, LATEST_BACKUP was the commit point. The backup became committed after the write to LATEST_BACKUP completed.
However, we can avoid the need for LATEST_BACKUP. Instead of write to LATEST_BACKUP, the commit point can be the rename from `meta/<backup_id>.tmp` to `meta/<backup_id>`. Once we see that there exists a file `meta/<backup_id>` (without tmp), we can assume that backup is valid.
In this diff, we still write out the file LATEST_BACKUP. We need to do this so that we can maintain backward compatibility. However, the new version doesn't depend on this file anymore. We get the latest backup by `ls`-ing `meta` directory.
This diff depends on D41925
Test Plan: Adjusted backupable_db_test to this new behavior
Reviewers: benj, yhchiang, sdong, AaronFeldman
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42069
Summary: Provide a way to specify a detailed static error message for a Status without incurring a memcpy. Let me know what people think of this approach.
Test Plan: added simple test
Reviewers: igor, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D44259
Summary:
As I keep adding new features to transactions, I keep creating more duplicate code. This diff cleans this up by creating a base implementation class for Transaction and OptimisticTransaction to inherit from.
The code in TransactionBase.h/.cc is all just copied from elsewhere. The only entertaining part of this class worth looking at is the virtual TryLock method which allows OptimisticTransactions and Transactions to share the same common code for Put/Get/etc.
The rest of this diff is mostly red and easy on the eyes.
Test Plan: No functionality change. existing tests pass.
Reviewers: sdong, jkedgar, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45135
Summary:
While working on supporting mixing merge operators with
single deletes ( https://reviews.facebook.net/D43179 ),
I realized that returning and dealing with merge results
can be made simpler. Submitting this as a separate diff
because it is not directly related to single deletes.
Before, callers of merge helper had to retrieve the merge
result in one of two ways depending on whether the merge
was successful or not (success = result of merge was single
kTypeValue). For successful merges, the caller could query
the resulting key/value pair and for unsuccessful merges,
the result could be retrieved in the form of two deques of
keys and values. However, with single deletes, a successful merge
does not return a single key/value pair (if merge
operands are merged with a single delete, we have to generate
a value and keep the original single delete around to make
sure that we are not accidentially producing a key overwrite).
In addition, the two existing call sites of the merge
helper were taking the same actions independently from whether
the merge was successful or not, so this patch simplifies that.
Test Plan: make clean all check
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43353
Summary: RandomRWFile is not used anywhere in out code base, this patch remove RandomRWFile
Test Plan:
make check -j64
USE_CLANG=1 make all -j64
OPT=-DROCKSDB_LITE make release -j64
Reviewers: sdong, yhchiang, anthony, kradhakrishnan, rven, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44091
Summary:
Clean up transactions to use the new RollbackToSavePoint api in WriteBatchWithIndex.
Note, this diff depends on Pessimistic Transactions diff and ManagedSnapshot diff (D40869 and D43293).
Test Plan: unit tests
Reviewers: rven, yhchiang, kradhakrishnan, spetrunia, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43371
Summary:
Initial implementation of Pessimistic Transactions. This diff contains the api changes discussed in D38913. This diff is pretty large, so let me know if people would prefer to meet up to discuss it.
MyRocks folks: please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.
Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint(). After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex. We can then decide which route is preferable.
Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.
Test Plan: Unit tests, db_bench parallel testing.
Reviewers: igor, rven, sdong, yhchiang, yoshinorim
Reviewed By: sdong
Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40869
Summary: The list of info log files of a db can be obtained using the new function.
Test Plan: New test in db_test.cc passed.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: IslamAbdelRahman, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41715
Summary:
This diff adds CompactOnDeletionCollector in utilities/table_properties_collectors,
which applies a sliding window to a sst file and mark this file as need-compaction
when it observe enough deletion entries within the consecutive keys covered by
the sliding window.
Test Plan: compact_on_deletion_collector_test
Reviewers: igor, anthony, IslamAbdelRahman, kradhakrishnan, yoshinorim, sdong
Reviewed By: sdong
Subscribers: maykov, dhruba
Differential Revision: https://reviews.facebook.net/D41175
Summary:
Support RollbackToSavePoint() in WriteBatch and WriteBatchWithIndex. Support for partial transaction rollback is needed for MyRocks.
An alternate implementation of Transaction::RollbackToSavePoint() exists in D40869. However, the other implementation is messier because it is implemented outside of WriteBatch. This implementation is much cleaner and also exposes a potentially useful feature to WriteBatch.
Test Plan: Added unit tests
Reviewers: IslamAbdelRahman, kradhakrishnan, maykov, yoshinorim, hermanlee4, spetrunia, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42723
Summary: Directly using TMPDIR can cause problems when running tests using parallel option. Fix them.
Test Plan: Run all tests in parallel
Reviewers: kradhakrishnan, yhchiang, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42807
Summary: Add new CheckFileExists method. Considered changing the FileExists api but didn't want to break anyone's builds.
Test Plan: unit tests
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42003
Summary:
Skipping these tests in ROCKSDB_LITE since they are not supported
json_document_test
wal_manager_test
ttl_test
sst_dump_test
deletefile_test
compact_files_test
prefix_test
checkpoint_test
Test Plan:
json_document_test
wal_manager_test
ttl_test
sst_dump_test
deletefile_test
compact_files_test
prefix_test
checkpoint_test
Reviewers: igor, sdong, yhchiang, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42573
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary: DocumentDB is not supported in ROCKSDB_LITE
Test Plan: document_db_test
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42177
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary:
MergeUntil was not reporting a success when merging an operand with
a Value/Deletion despite the comments in MergeHelper and CompactionJob
indicating otherwise. This lead to operands being written to the compaction
output unnecessarily:
M1 M2 M3 P M4 M5 --> (P+M1+M2+M3) M2 M3 M4 M5 (before the diff)
M1 M2 M3 P M4 M5 --> (P+M1+M2+M3) M4 M5 (after the diff)
In addition, the code handling Values/Deletion was basically identical.
This patch unifies the code. Finally, this patch also adds testing for
merge_helper.
Test Plan: make && make check
Reviewers: sdong, rven, yhchiang, tnovak, igor
Reviewed By: igor
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42351
- Remove make file defines from public headers and use _WIN32 because it is compiler defined
- use __GNUC__ and __clang__ to guard non-portable attributes
- add #include "port/port.h" to some new .cc files.
- minor changes in CMakeLists to reflect recent changes
Summary: Moved convenience.h out of utilities to remove a dependency on utilities in db.
Test Plan: unit tests. Also compiled a link to the old location to verify the _Pragma works.
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42201
Summary:
Couple of changes here:
* NewBackupEngine() and NewReadOnlyBackupEngine() are now removed. They were deprecated since RocksDB 3.8. Changing these to new functions should be pretty straight-forward. As a followup, I'll fix all fbcode callsights
* Instead of initializing backup engine in the constructor, we initialize it in a separate function now. That way, we can catch all errors and return appropriate status code.
* We catch all errors during initializations and return them to the client properly.
* Added new tests to backupable_db_test, to make sure that we can't open BackupEngine when there are Env errors.
* Transitioned backupable_db_test to use BackupEngine rather than BackupableDB. From the two available APIs, judging by the current use-cases, it looks like BackupEngine API won. It's much more flexible since it doesn't require StackableDB.
Test Plan: Added a new unit test to backupable_db_test
Reviewers: yhchiang, sdong, AaronFeldman
Reviewed By: AaronFeldman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41925
Summary: Seems like the cleanest way to resolve this is to move CompactedDBImpl into db/. CompactedDBImpl should probably live in the same place as DBImplReadonly since Opening the latter could end up instantiating the former. Both DBImplReadonly and CompactedDBImpl inherit from DBImpl access protected members of DBImpl( and the latter access friendly private methods).
Test Plan: unit tests
Reviewers: sdong, yhchiang, kradhakrishnan, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42027
Summary: Block spatial_db_test in ROCKSDB_LITE as SpatialDB is not supported
Test Plan: spatial_db_test
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D41991
Summary: Adding a main for optimistic_transaction_test that report that it was skipped when using ROCKSDB_LITE
Test Plan: optimistic_transaction_test
Reviewers: yhchiang, sdong, igor, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D41979
Summary: This helps Windows port to format their changes, as discussed. Might have formatted some other codes too becasue last 10 commits include more.
Test Plan: Build it.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41961
Summary: see title
Test Plan: run 'make unity'
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D41079
Summary:
Add a new field: BackupableDBOptions.max_background_copies.
CreateNewBackup() and RestoreDBFromBackup() will use this number of threads to perform copies.
If there is a backup rate limit, then max_background_copies must be 1.
Update backupable_db_test.cc to test multi-threaded backup and restore.
Update backupable_db_test.cc to test backups when the backup environment is not the same as the database environment.
Test Plan:
Run ./backupable_db_test
Run valgrind ./backupable_db_test
Run with TSAN and ASAN
Reviewers: yhchiang, rven, anthony, sdong, igor
Reviewed By: igor
Subscribers: yhchiang, anthony, sdong, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40725
invalid suffix on literal
no return statement in function returning non-void CuckooStep::operator=
extra qualification ‘rocksdb::spatial::Variant::
dereferencing type-punned pointer will break strict-aliasing rules
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary: Make stringappend_test runnable in ROCKSDB_LITE
Test Plan: stringappend_test
Reviewers: sdong, rven, anthony, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40593
Summary: Fixed a valgrind issue in checkpoint_test
Test Plan: valgrind on checkpoint_test
Reviewers: igor, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40455
Summary:
When there are multiple column families, the flush in
GetLiveFiles is not atomic, so that there are entries in the wal files
which are needed to get a consisten RocksDB. We now add the log files to
the checkpoint.
Test Plan:
CheckpointCF - This test forces more data to be written to
the other column families after the flush of the first column family but
before the second.
Reviewers: igor, yhchiang, IslamAbdelRahman, anthony, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40323
Summary:
Block geodb_test in ROCKSDB_LITE as geodb is not supported
in ROCKSDB_LITE
Test Plan: geodb_test
Reviewers: sdong, rven, anthony, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40335
Summary:
Currently RocksDB silently ignores this issue and doesn't compress the data. Based on discussion, we agree that this is pretty bad because it can cause confusion for our users.
This patch fails DB::Open() if we don't support the compression that is specified in the options.
Test Plan: make check with LZ4 not present. If Snappy is not present all tests will just fail because Snappy is our default library. We should make Snappy the requirement, since without it our default DB::Open() fails.
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39687
Summary:
This diff update DB::CompactRange to use RangeCompactionOptions instead of using multiple parameters
Old CompactRange is still available but deprecated
Test Plan:
make all check
make rocksdbjava
USE_CLANG=1 make all
OPT=-DROCKSDB_LITE make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40209
Summary:
[This is the resubmit of D39813. Tests were failing, so I reverted the diff. I found the bug and I'm now resubmitting]
If we don't do this, any calls to Entry() after WBWI mutation will result in undefined behavior. We need to re-fetch the offset from the skip list and regenerate the new pointer (because string's base pointer can change while mutating).
Test Plan: COMPILE_WITH_ASAN=1 make write_batch_with_index_test && ./write_batch_with_index_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39897
Summary: If we don't do this, any calls to Entry() after WBWI mutation will result in undefined behavior. We need to re-fetch the offset from the skip list and regenerate the new pointer (because string's base pointer can change while mutating).
Test Plan: COMPILE_WITH_ASAN=1 make write_batch_with_index_test && ./write_batch_with_index_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39813
Summary: Some test and benchmark codes don't build for CYGWIN. Fix it.
Test Plan: Build "make all" with TARGET_OS=Cygwin on cygwin and make sure it passes.
Reviewers: rven, yhchiang, anthony, igor, kradhakrishnan
Reviewed By: igor, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39711
Summary: We should support use-cases that mutate WBWI while they're iterating it. This diff adds a unit test to check this behavior.
Test Plan: this is a test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39501
Summary:
Replacing the default value for compaction_filter_factory and compaction_filter_factory_v2 to be nullptr instead of DefaultCompactionFilterFactory / DefaultCompactionFilterFactoryV2
The reason for this is to be able to determine easily if we have compaction filter factory or not without depending on RTTI
Test Plan: make check
Reviewers: yoshinorim, ott, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39693
Summary: Change from one std::to_string() to ToString() for Cygwin build
Test Plan: Build it under cygwin
Reviewers: rven, anthony, IslamAbdelRahman, igor, kradhakrishnan
Reviewed By: igor, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39657
Summary: In DB::CompactRange(), change parameter "reduce_level" to "change_level". Users can compact all data to the last level if needed. By doing it, users can migrate the DB to options.level_compaction_dynamic_level_bytes=true.
Test Plan: Add a unit test for it.
Reviewers: yhchiang, anthony, kradhakrishnan, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39099
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary:
Added a couple functions to WriteBatchWithIndex to make it easier to query the value of a key including reading pending writes from a batch. (This is needed for transactions).
I created write_batch_with_index_internal.h to use to store an internal-only helper function since there wasn't a good place in the existing class hierarchy to store this function (and it didn't seem right to stick this function inside WriteBatchInternal::Rep).
Since I needed to access the WriteBatchEntryComparator, I moved some helper classes from write_batch_with_index.cc into write_batch_with_index_internal.h/.cc. WriteBatchIndexEntry, ReadableWriteBatch, and WriteBatchEntryComparator are all unchanged (just moved to a different file(s)).
Test Plan: Added new unit tests.
Reviewers: rven, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38037
Summary:
In D28521 we removed GarbageCollect() from BackupEngine's constructor. The reason was that opening BackupEngine on HDFS was very slow and in most cases we didn't have any garbage. We allowed the user to call GarbageCollect() when it detects some garbage files in his backup directory.
Unfortunately, this left us vulnerable to an interesting issue. Let's say we started a backup and copied files {1, 3} but the backup failed. On another host, we restore DB from backup and generate {1, 3, 5}. Since {1, 3} is already there, we will not overwrite. However, these files might be from a different database so their contents might be different. See internal task t6781803 for more info.
Now, when we're copying files and we discover a file already there, we check:
1. if the file is not referenced from any backups, we overwrite the file.
2. if the file is referenced from other backups AND the checksums don't match, we fail the backup. This will only happen if user is using a single backup directory for backing up two different databases.
3. if the file is referenced from other backups AND the checksums match, it's all good. We skip the copy and go copy the next file.
Test Plan: Added new test to backupable_db_test. The test fails before this patch.
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37599
Summary:
Make it build for CYGWIN.
Need to define "-std=gnu++11" instead of "-std=c++11" and use some replacement functions.
Test Plan: Build it and run some unit tests in CYGWIN
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37605
Summary:
The usage I'm fixing here caused trouble on Fedora 21 when
compiling with the current gcc version 4.9.2 20150212 (Red Hat 4.9.2-6) (GCC):
db/write_controller_test.cc: In member function ‘virtual void rocksdb::WriteControllerTest_SanityTest_Test::TestBody()’:
db/write_controller_test.cc:23:165: error: converting ‘false’ to pointer type for argument 1 of ‘char testing::internal::IsNullLiteralHelper(testing::internal::Secret*)’ [-Werror=conversion-null]
ASSERT_EQ(false, controller.IsStopped());
^
This change was induced mechanically via:
git grep -l -E 'ASSERT_EQ\(false'|xargs perl -pi -e 's/ASSERT_EQ\(false, /ASSERT_FALSE(/'
git grep -l -E 'ASSERT_EQ\(true'|xargs perl -pi -e 's/ASSERT_EQ\(true, /ASSERT_TRUE(/'
Except for the three in utilities/backupable/backupable_db_test.cc for which
I ended up reformatting (joining lines) in the result.
As for why this problem is exhibited with that version of gcc, and none
of the others I've used (from 4.8.1 through gcc-5.0.0 and newer), I suspect
it's a bug in F21's gcc that has been fixed in gcc-5.0.0.
Test Plan:
"make" now succeed on Fedora 21
Reviewers: ljin, rven, igor.sugak, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37329
Summary:
Fix the following compilation error in flashcache.cc on Mac
Undefined symbols for architecture x86_64:
"rocksdb::NewFlashcacheAwareEnv(rocksdb::Env*, int)", referenced from:
rocksdb::Benchmark::Open(rocksdb::Options*) in db_bench.o
Test Plan: make db_bench
Reviewers: sdong, igor, rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36657
Summary:
There are some cases when flachcache file descriptor was
already allocated (i.e. fb-MySQL). Then NewFlashcacheAwareEnv returns an
error at open() because fd was already assigned. This diff adds another
function to instantiate FlashcacheAwareEnv, with pre-allocated fd cachedev_fd.
Test Plan: Tested with MyRocks using this function, then worked
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, MarkCallaghan, rven
Differential Revision: https://reviews.facebook.net/D36447
Summary:
This diff fixes a crash found when an empty database is opened in readonly mode.
We now check the number of levels before we open the DB as a compacted DB.
Test Plan: DBTest.EmptyCompactedDB
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D36327
Summary: Most of the approach is copied from WebSQL's MySQL branch. It's nice that we can do this without touching core RocksDB code.
Test Plan: Compiles and runs. Didn't test flashback code, as I don't have flashback device and most if it is c/p
Reviewers: MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: rven, lgalanis, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35391
Summary:
We have addded new stats and perf_context for measuring the merge and filter operation time consumption.
We have bounded all the merge operations within the GUARD statment and collected the total time for these operations in the DB.
Test Plan: WIP
Reviewers: rven, yhchiang, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34377
Summary: WriteBatch and WriteBatchWithIndex now both inherit from a common abstract base class. This makes it easier to write code that is agnostic toward the implementation of the particular write batch. In particular, I plan on utilizing this abstraction to allow transactions to support using either implementation of a write batch.
Test Plan: modified existing WriteBatchWithIndex tests to test new functions. Running all tests.
Reviewers: igor, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34017
Summary:
Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different.
In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest.
There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides.
```lang=bash
% cat ~/transform
#!/bin/sh
files=$(git ls-files '*test\.cc')
for file in $files
do
if grep -q "rocksdb::test::RunAllTests()" $file
then
if grep -Eq '^class \w+Test {' $file
then
perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file
perl -pi -e 's/^(TEST)/${1}_F/g' $file
fi
perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file
perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file
fi
done
% sh ~/transform
% make format
```
Second iteration of this diff contains only scripted changes.
Third iteration contains manual changes to fix last errors and make it compilable.
Test Plan:
Build and notice no errors.
```lang=bash
% USE_CLANG=1 make check -j55
```
Tests are still testing.
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35157
Summary: Some suggestions for cleanup from Igor.
Test Plan: Regression tests.
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35169
Summary:
gtest does not use exceptions to fail a unit test by design, and `ASSERT*`s are implemented using `return`. As a consequence we cannot use `ASSERT*` in a function that does not return `void` value ([[ https://code.google.com/p/googletest/wiki/AdvancedGuide#Assertion_Placement | 1]]), and have to fix our existing code. This diff does this in a generic way, with no manual changes.
In order to detect all existing `ASSERT*` that are used in functions that doesn't return void value, I change the code to generate compile errors for such cases.
In `util/testharness.h` I defined `EXPECT*` assertions, the same way as `ASSERT*`, and redefined `ASSERT*` to return `void`. Then executed:
```lang=bash
% USE_CLANG=1 make all -j55 -k 2> build.log
% perl -naF: -e 'print "-- -number=".$F[1]." ".$F[0]."\n" if /: error:/' \
build.log | xargs -L 1 perl -spi -e 's/ASSERT/EXPECT/g if $. == $number'
% make format
```
After that I reverted back change to `ASSERT*` in `util/testharness.h`. But preserved introduced `EXPECT*`, which is the same as `ASSERT*`. This will be deleted once switched to gtest.
This diff is independent and contains manual changes only in `util/testharness.h`.
Test Plan:
Make sure all tests are passing.
```lang=bash
% USE_CLANG=1 make check
```
Reviewers: igor, lgalanis, sdong, yufei.zhu, rven, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33333
Summary: These changes are necessary to make tests look more generic, and avoid feature conflicts with gtest.
Test Plan:
Make sure no build errors, and all test are passing.
```
% make check
```
Reviewers: igor, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35145
Summary:
Provide an API which enables users to infor Rocksdb that it is
shutting down.
Test Plan: db_test
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34617
Summary: I was pretty sure I compiled this before landing, sorry :/
Test Plan: compiles
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34173
Summary:
This diff fixes a bug introduced by D28521. Read-only backup engine can delete a backup that is later than the latest -- we never check the condition.
I also added a bunch of logging that will help with debugging cases like this in the future.
See more discussion at t6218248.
Test Plan: Added a unit test that was failing before the change. Also, see new LOG file contents: https://phabricator.fb.com/P19738984
Reviewers: benj, sanketh, sumeet, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33897
Summary: as title, we have unused variables. this is a short-term solution
Test Plan: compiles
Reviewers: IslamAbdelRahman, sdong, rven
Reviewed By: rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34125
Summary: mac compile is fixed in fbson, so it can be returned back from 7ce1b2c
Test Plan:
make all check
make valgrind_check
Reviewers: golovachalexander, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33855
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary: Replaced rapidjson with fbson
Test Plan:
make all check
make valgrind_check
Reviewers: golovachalexander, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D32733
Summary: I'm moving mongo to a single column family, so I need DeltaBase iterator with default column family.
Test Plan: Added unit test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32589
Summary: It looks like ASAN with gcc 4.9 works better than 4.8.1. It detected this possibility of heap buffer overflow. This was in our codebase for a year :)
Test Plan: COMPILE_WITH_ASAN=1 make backupable_db && ./backupable_db
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32085
Summary:
While running cross-functional tests for weak iterators, I
encountered a bug in GeoDB. GeoDB reads a key from the database and
tries to use it after doing a Seek. Fixing it by storing the key locally
so that it is still visible after the Seek.
Test Plan: Run geodb_test
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31599
Summary: We keep checksum functions in util/, there is no reason for compression to be in port/
Test Plan: compiles
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31281
* Use emplace when possible.
* Make FileInfo shared among all BackupMeta, instead of storing filenames.
* Make checksum_value in FileInfo constant.
* Reserve space beforehand if container size is known.
* Make FileInfo and BackupMeta non-copyable and non-assignable to prevent future logic errors.
It is very dangerous to copy BackupMeta without careful handling refcounts of FileInfo.
* Remove a copy of BackupMeta when detected corrupt backup.
* Use strtoul() and strtoull() instead of sscanf().
glibc's sscanf() will do a implicit strlen().
* Move implicit construction of Slice("crc32 ") out of loop.
Summary:
GetThreadList() feature depends on the thread creation and destruction, which is currently handled under Env.
This patch moves GetThreadList() feature under Env to better manage the dependency of GetThreadList() feature
on thread creation and destruction.
Renamed ThreadStatusImpl to ThreadStatusUpdater. Add ThreadStatusUtil, which is a static class contains
utility functions for ThreadStatusUpdater.
Test Plan: run db_test, thread_list_test and db_bench and verify the life cycle of Env and ThreadStatusUpdater is properly managed.
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: ljin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30057
Summary: This is a feature request from rocksdb's user. I didn't even realize we don't support multigets on TTL DB :)
Test Plan: added a unit test
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30561
Summary: stringSplit is not how we name our functions. Also, we had two StringSplit's in the codebase
Test Plan: make check
Reviewers: yhchiang, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29361
Summary: Created a CompatibleOptions object that can be used as a LevelDB Options object and then converted to a RocksDB Options object using the ConvertOptions() method.
Test Plan: Unit test included in diff.
Reviewers: ljin
Reviewed By: ljin
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28893
Summary:
Add GetThreadList API, which allows developer to track the
status of each process. Currently, calling GetThreadList will
only get the list of background threads in RocksDB with their
thread-id and thread-type (priority) set. Will add more support
on this in the later diffs.
ThreadStatus currently has the following properties:
// An unique ID for the thread.
const uint64_t thread_id;
// The type of the thread, it could be ROCKSDB_HIGH_PRIORITY,
// ROCKSDB_LOW_PRIORITY, and USER_THREAD
const ThreadType thread_type;
// The name of the DB instance where the thread is currently
// involved with. It would be set to empty string if the thread
// does not involve in any DB operation.
const std::string db_name;
// The name of the column family where the thread is currently
// It would be set to empty string if the thread does not involve
// in any column family.
const std::string cf_name;
// The event that the current thread is involved.
// It would be set to empty string if the information about event
// is not currently available.
Test Plan:
./thread_list_test
export ROCKSDB_TESTS=GetThreadList
./db_test
Reviewers: rven, igor, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D25047
Summary:
CorruptionTest for backupable_db_test did not call
GarbageCollect() after deleting a corrupt backup,
which sometimes lead to test failures as the newly created backup
would reuse the same backup ID and files and fail the consistency
check.
Moved around some of the test logic to ensure that GarbageCollect()
is called at the right time.
Test Plan:
Run backupable_db_test eight times and make sure
it passes repeatedly. Also run make check to make sure other
tests don't fail.
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28863
Summary: This will speed up our import times
Test Plan: Added simple unit test just to get code coverage
Reviewers: sdong, ljin, yhchiang, rven, mohaps
Reviewed By: mohaps
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28869
Summary:
Improve the backup engine by not deleting the corrupted
backup when it is detected; instead leaving it to the client
to delete the corrupted backup.
Also add a BackupEngine::Open() call.
Test Plan:
Add check to CorruptionTest inside backupable_db_test
to check that the corrupt backups are not deleted. The previous
version of the code failed this test as backups were deleted,
but after the changes in this commit, this test passes.
Run make check to ensure that no other tests fail.
Reviewers: sdong, benj, sanketh, sumeet, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28521
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary: It turns out that -Wshadow has different rules for gcc than clang. Previous commit fixed clang. This commits fixes the rest of the warnings for gcc.
Test Plan: compiles
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28131
Summary: Enforce the accessier naming convention in functions in version_set.h
Test Plan: make all check
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28143
Summary: Move header file so it can be referenced externally.
Test Plan: Rebuild.
Reviewers: ljin
Reviewed By: ljin
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D28095
Summary:
...and fix all the errors :)
Jim suggested turning on -Wshadow because it helped him fix number of critical bugs in fbcode. I think it's a good idea to be -Wshadow clean.
Test Plan: compiles
Reviewers: yhchiang, rven, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27711
Summary:
Rename Version::Builder to VersionBuilder and expose its definition to a header.
Make VerisonBuilder not reference Version or ColumnFamilyData, only working with VersionStorageInfo.
Add version_builder_test which has a simple test.
Test Plan: make all check
Reviewers: rven, yhchiang, igor, ljin
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27969
Summary: Apply InfoLogLevel to the logs in utilities/ttl/db_ttl_impl.h
Test Plan: make
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27885
Summary:
Apply InfoLogLevel to the logs and add missing copy-right information
to utilities/merge_operators/uint64add.cc.
Test Plan: make
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27897
Summary:
Make compaction picker easier to test.
The basic idea is to separate a minimum subcomponent of Version to VersionStorageInfo, which just responsible to LSM tree. A stub VersionStorageInfo can then be easily created and passed into compaction picker so that we can check the outputs.
It now passes most tests. Still two things need to be done:
(1) deal with the FIFO compaction's file size.
(2) write an example test to make sure the interface can do the job.
Add a compaction_picker_test to make sure compaction picker codes can be easily unit tested.
Test Plan:
Pass all unit tests and compaction_picker_test
Reviewers: yhchiang, rven, igor, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27639
Summary:
We have several different types of data structures for file information.
FileLevel is kinda of confusing since it only contains file range and
fd. Rename it to LevelFilesBrief to make it clear.
Unfriend CompactedDBImpl as a by product
Test Plan:
make release / make all
will run full test with all stacked diffs
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27585
Summary: WriteBatchWithIndex's iterator's SeekToFirst() and SeekToLast() use offset=0 to indicate it is smaller than all the keys, which is wrong. offset=0 will decode a key "" (the header decodes like that). It could be larger than other keys in non-default comparators. Fix it by using a special flag of offset to indicate searching to the beginning of the CF.
Test Plan: Add a unit test that used to fail. Also, add some more tests to related cases, though they don't fail for now.
Reviewers: igor
Reviewed By: igor
Subscribers: rven, yhchiang, ljin, leveldb
Differential Revision: https://reviews.facebook.net/D24873
Summary: Add an iterator that combines base_iterator of type Iterator* with delta iterator of type WBWIIterator*.
Test Plan: nothing yet. work in progress
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: rven, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D24741
Summary: Support SeekToFirst(), SeekToLast() and Prev() in WBWIIterator, returned by WriteBatchWithIndex::NewIterator().
Test Plan: Write unit test cases to cover the case.
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: rven, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D24765
Summary: With a new option, when accepting a new key, WriteBatchWithIndex will find an existing index of the same key, and replace the content of it.
Test Plan: Add a unit test case.
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24753
Summary: Allow accepting Options as a string of key/value pairs
Test Plan: unit test
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D24597
Check for lhs and not twice for rhs.
Fix for:
[utilities/document/document_db.cc:36] ->
[utilities/document/document_db.cc:36]: (style) Same expression on both
sides of '&&'.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Use empty() since it should be prefered as it has, following
the standard, a constant time complexity regardless of the
containter type. The same is not guaranteed for size().
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Fix for:
[utilities/ttl/db_ttl_impl.h:209]: (performance) Function parameter
'merge_op' should be passed by reference.
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
Summary:
info_log from supplied Options can be nullptr. Using the one from
db_impl. Also call flush after that since no more loggging will happen
and LOG can contain partial output
Test Plan: verified with db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24183
Summary:
Intead of passing callback function pointer and its arg on Table::Get()
interface, passing GetContext. This makes the interface cleaner and
possible better perf. Also adding a fast pass for SaveValue()
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24057
Summary:
Add the MultiGet API to allow prefetching.
With file size of 1.5G, I configured it to have 0.9 hash ratio that can
fill With 115M keys and result in 2 hash functions, the lookup QPS is
~4.9M/s vs. 3M/s for Get().
It is tricky to set the parameters right. Since files size is determined
by power-of-two factor, that means # of keys is fixed in each file. With
big file size (thus smaller # of files), we will have more chance to
waste lot of space in the last file - lower space utilization as a
result. Using smaller file size can improve the situation, but that
harms lookup speed.
Test Plan: db_bench
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23673
Summary:
Add a CompactedDBImpl that will enabled when calling OpenForReadOnly()
and the DB only has one level (>0) of files. As a performan comparison,
CuckooTable performs 2.1M/s with CompactedDBImpl vs. 1.78M/s with
ReadOnlyDBImpl.
Test Plan: db_bench
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23553
Summary:
Previously, one single column family is given to WriteBatchWithIndex to index keys for all column families. An extra map from column family ID to comparator is maintained which can override the default comparator given in the constructor. A WriteBatchWithIndex::SetComparatorForCF() is added for user to add comparators per column family.
Also move more codes into anonymous namespace.
Test Plan: Add a unit test
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: dhruba, leveldb, yhchiang
Differential Revision: https://reviews.facebook.net/D23355
Summary:
Fixed a signed-unsigned comparison in spatial_db.cc
utilities/spatialdb/spatial_db.cc:542:38: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
cc1plus: all warnings being treated as errors
make: *** [utilities/spatialdb/spatial_db.o] Error 1
Test Plan:
make spatial_db_test
./spatial_db_test
Reviewers: ljin, sdong, reddragon, igor
Reviewed By: reddragon
Subscribers: reddragon, leveldb
Differential Revision: https://reviews.facebook.net/D23565
Summary:
Added the following statistics to BackupableDB:
1. Number of successful and failed backups in class BackupStatistics
2. Time taken to do a backup
3. Number of files in a backup
1 is implemented in the BackupStatistics class
2 and 3 are added in the BackupMeta and BackupInfo class
Test Plan:
1 can be tested using BackupStatistics::ToString(),
2 and 3 can be tested in the BackupInfo class
Reviewers: sdong, igor2, ljin, igor
Reviewed By: igor
Differential Revision: https://reviews.facebook.net/D22785
1, const qualifiers on return types make no sense and will trigger a compile warning: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
2, class HistogramImpl has virtual functions and thus should have a virtual destructor
3, with some toolchain, the macro __STDC_FORMAT_MACROS is predefined and thus should be checked before define
Change-Id: I69747a03bfae88671bfbb2637c80d17600159c99
Signed-off-by: liuhuahang <liuhuahang@zerus.co>
