Summary:
options_file_example should be added in .gitignore so that it does not show up as an untracked file in `git status`.
Closes https://github.com/facebook/rocksdb/pull/2026
Differential Revision: D4759402
Pulled By: sagar0
fbshipit-source-id: d7fe133
Summary:
This option is needed to be enabled for Direct IO
and I cannot think of a reason where we need to disable it
remove it and default it to true
Closes https://github.com/facebook/rocksdb/pull/1944
Differential Revision: D4641088
Pulled By: IslamAbdelRahman
fbshipit-source-id: d7085b9
Summary:
The Makefile in the examples directory contained an empty line contain a tab character. This made my Emacs ask on every save `Suspicious line 10. Save anyway? (y or n)`
Closes https://github.com/facebook/rocksdb/pull/1872
Differential Revision: D4573881
Pulled By: siying
fbshipit-source-id: fb3b4ee
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
"examples/c_simple_example.c" did not have a proper copyright header.
Closes https://github.com/facebook/rocksdb/pull/1670
Differential Revision: D4327445
Pulled By: yiwu-arbug
fbshipit-source-id: a70389e
Summary: Add mutable options info into `OptionsTypeInfo` and use it to parse mutable options map. Also support `max_bytes_for_level_multiplier_additional` in option file.
Test Plan: unit test
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63843
Summary: compile and link with jemalloc in examples binaries
Test Plan:
cd examples
make -j64
Reviewers: andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D59457
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
Test Plan:
'export TEST_TMPDIR=/dev/shm/ && DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32' is OK.
I didn't run the Java tests, I don't have Java set up on my devserver.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56133
Summary:
When a block based table file is opened, if prefetch_index_and_filter is true, it will prefetch the index and filter blocks, putting them into the block cache.
What this feature adds: when a L0 block based table file is opened, if pin_l0_filter_and_index_blocks_in_cache is true in the options (and prefetch_index_and_filter is true), then the filter and index blocks aren't released back to the block cache at the end of BlockBasedTableReader::Open(). Instead the table reader takes ownership of them, hence pinning them, ie. the LRU cache will never push them out. Meanwhile in the table reader, further accesses will not hit the block cache, thus avoiding lock contention.
When the table reader is destroyed, it releases the pinned blocks (if there were any). This has to happen before the cache is destroyed, so I had to introduce a TableReader::Close(), to guarantee the order of destruction.
Test Plan:
Added two unit tests for this. Existing unit tests run fine (default is pin_l0_filter_and_index_blocks_in_cache=false).
DISABLE_JEMALLOC=1 OPT=-g make all valgrind_check -j32
Mac: OK.
Linux: with D55287 patched in it's OK.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54801
Summary: For some reason `make librocksdb.a` is not valid anymore. Replace with `make static_lib`
Test Plan: cd examples/; make all;
Reviewers: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52017
Summary:
Update examples/rocksdb_option_file_example.ini to use the options file
generated by the db_bench readwhilewriting benchmark.
Test Plan: no code change.
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51567
Summary: Fixed some typos in the comments of rocksdb options file example
Test Plan: No code change.
Reviewers: igor, anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51393
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
Summary:
Introduce TableOptions section and support BlockBasedTable in RocksDB
options file. A TableOptions section has the following format:
[TableOptions/<FactoryClassName> "<ColumnFamily Name>"]
which includes information about its TableFactory class and belonging
column family. Below is an example TableOptions section of a
BlockBasedTableOptions that belongs to the default column family:
[TableOptions/BlockBasedTable "default"]
format_version=0
whole_key_filtering=true
block_size_deviation=10
block_size=4096
block_restart_interval=16
filter_policy=nullptr
no_block_cache=false
checksum=kCRC32c
cache_index_and_filter_blocks=false
index_type=kBinarySearch
hash_index_allow_collision=true
flush_block_policy_factory=FlushBlockBySizePolicyFactory
Currently, Cache-type options (i.e., block_cache and block_cache_compressed)
are not supported.
Test Plan: options_test
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48435
Summary:
Since Andres' internship is over, I took over https://reviews.facebook.net/D42555 and rebased and simplified it a bit.
The behavior in this diff is a bit simpler than in D42555:
* only merge operators are passed through FilterMergeValue(). If fitler function returns true, the merge operator is ignored
* compaction filter is *not* called on: 1) results of merge operations and 2) base values that are getting merged with merge operands (the second case was also true in previous diff)
Do we also need a compaction filter to get called on merge results?
Test Plan: make && make check
Reviewers: lovro, tnovak, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: noetzli, kolmike, leveldb, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D47847
Summary:
This patch defines the format of RocksDB options file, which
follows the INI file format, and implements functions for its
serialization and deserialization. An example RocksDB options
file can be found in examples/rocksdb_option_file_example.ini.
A typical RocksDB options file has three sections, which are
Version, DBOptions, and more than one CFOptions. The RocksDB
options file in general follows the basic INI file format
with the following extensions / modifications:
* Escaped characters
We escaped the following characters:
- \n -- line feed - new line
- \r -- carriage return
- \\ -- backslash \
- \: -- colon symbol :
- \# -- hash tag #
* Comments
We support # style comments. Comments can appear at the ending
part of a line.
* Statements
A statement is of the form option_name = value.
Each statement contains a '=', where extra white-spaces
are supported. However, we don't support multi-lined statement.
Furthermore, each line can only contain at most one statement.
* Section
Sections are of the form [SecitonTitle "SectionArgument"],
where section argument is optional.
* List
We use colon-separated string to represent a list.
For instance, n1:n2:n3:n4 is a list containing four values.
Below is an example of a RocksDB options file:
[Version]
rocksdb_version=4.0.0
options_file_version=1.0
[DBOptions]
max_open_files=12345
max_background_flushes=301
[CFOptions "default"]
[CFOptions "the second column family"]
[CFOptions "the third column family"]
Test Plan: Added many tests in options_test.cc
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46059
Summary:
See task #7983654. The example was triggering an assert in compaction job
because the compaction was not marked as manual. With this patch,
CompactionPicker::FormCompaction() marks compactions as manual. This patch
also fixes a couple of typos, adds optimistic_transaction_example to
.gitignore and librocksdb as a dependency for examples. Adding librocksdb as
a dependency makes sure that the examples are built with the latest changes
in librocksdb.
Test Plan: make clean && cd examples && make all && ./compact_files_example
Reviewers: rven, sdong, anthony, igor, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45117
Summary:
Initial implementation of Pessimistic Transactions. This diff contains the api changes discussed in D38913. This diff is pretty large, so let me know if people would prefer to meet up to discuss it.
MyRocks folks: please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.
Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint(). After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex. We can then decide which route is preferable.
Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.
Test Plan: Unit tests, db_bench parallel testing.
Reviewers: igor, rven, sdong, yhchiang, yoshinorim
Reviewed By: sdong
Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40869
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Valgrind report prior to this fix:
==20829== Memcheck, a memory error detector
==20829== Copyright (C) 2002-2013, and GNU GPL'd, by Julian Seward et al.
==20829== Using Valgrind-3.10.0.SVN and LibVEX; rerun with -h for copyright info
==20829== Command: ./c_simple_example
==20829==
==20829== Invalid read of size 1
==20829== at 0x4C2F1C8: strcmp (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==20829== by 0x422522: main (in /home/user/rocksgit/transfer/rocksdb-git/examples/c_simple_example)
==20829== Address 0x5f60df5 is 0 bytes after a block of size 5 alloc'd
==20829== at 0x4C2AB80: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==20829== by 0x4226D5: CopyString (c.cc:498)
==20829== by 0x423032: rocksdb_get (c.cc:730)
==20829== by 0x4224EB: main (in /home/user/rocksgit/transfer/rocksdb-git/examples/c_simple_example)
==20829==
==20829==
==20829== HEAP SUMMARY:
==20829== in use at exit: 77 bytes in 5 blocks
==20829== total heap usage: 4,491 allocs, 4,486 frees, 839,216 bytes allocated
==20829==
==20829== LEAK SUMMARY:
==20829== definitely lost: 5 bytes in 1 blocks
==20829== indirectly lost: 0 bytes in 0 blocks
==20829== possibly lost: 0 bytes in 0 blocks
==20829== still reachable: 72 bytes in 4 blocks
==20829== suppressed: 0 bytes in 0 blocks
==20829== Rerun with --leak-check=full to see details of leaked memory
==20829==
==20829== For counts of detected and suppressed errors, rerun with: -v
==20829== ERROR SUMMARY: 1 errors from 1 contexts (suppressed: 0 from 0)
Summary: I'm tired of double-tab when opening build_tools/<something>. This change will make bu<tab> fully complete my path :)
Test Plan: `vi bu<tab>` gives me `vi build_tools/` yay!
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30639
