Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
For simplicity, to avoid the feature is disabled in two cases: i) When more than one sub-compaction are sharing the same snapshot list, ii) when Range Delete is used in which the range delete aggregator has its own copy of snapshot list.
This fixes the reverted https://github.com/facebook/rocksdb/pull/5099 issue with range deletes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5278
Differential Revision: D15203291
Pulled By: maysamyabandeh
fbshipit-source-id: fa645611e606aa222c7ce53176dc5bb6f259c258
Summary:
Our daily stress tests are failing after this feature. Reverting temporarily until we figure the reason for test failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5269
Differential Revision: D15151285
Pulled By: maysamyabandeh
fbshipit-source-id: e4002b99690a97df30d4b4b58bf0f61e9591bc6e
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5099
Differential Revision: D15086710
Pulled By: maysamyabandeh
fbshipit-source-id: 7649f56c3b6b2fb334962048150142a3bf9c1a12
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
MyRocks calls `GetForUpdate` on `INSERT`, for unique key check, and in almost all cases GetForUpdate returns empty result. For such cases, whole key bloom filter is helpful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4985
Differential Revision: D14118257
Pulled By: miasantreble
fbshipit-source-id: d35cb7109c62fd5ad541a26968e3a3e16d3e85ea
Summary:
The PR is targeting to resolve the issue of:
https://github.com/facebook/rocksdb/issues/3972#issue-330771918
We have a rocksdb created with leveled-compaction with multiple column families (CFs), some of CFs are using HDD to store big and less frequently accessed data and others are using SSD.
When there are continuously write traffics going on to all CFs, the compaction thread pool is mostly occupied by those slow HDD compactions, which blocks fully utilize SSD bandwidth.
Since atomic write and transaction is needed across CFs, so splitting it to multiple rocksdb instance is not an option for us.
With the compaction thread control, we got 30%+ HDD write throughput gain, and also a lot smooth SSD write since less write stall happening.
ConcurrentTaskLimiter can be shared with multi-CFs across rocksdb instances, so the feature does not only work for multi-CFs scenarios, but also for multi-rocksdbs scenarios, who need disk IO resource control per tenant.
The usage is straight forward:
e.g.:
//
// Enable compaction thread limiter thru ColumnFamilyOptions
//
std::shared_ptr<ConcurrentTaskLimiter> ctl(NewConcurrentTaskLimiter("foo_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = ctl;
...
//
// Compaction thread limiter can be tuned or disabled on-the-fly
//
ctl->SetMaxOutstandingTask(12); // enlarge to 12 tasks
...
ctl->ResetMaxOutstandingTask(); // disable (bypass) thread limiter
ctl->SetMaxOutstandingTask(-1); // Same as above
...
ctl->SetMaxOutstandingTask(0); // full throttle (0 task)
//
// Sharing compaction thread limiter among CFs (to resolve multiple storage perf issue)
//
std::shared_ptr<ConcurrentTaskLimiter> ctl_ssd(NewConcurrentTaskLimiter("ssd_limiter", 8));
std::shared_ptr<ConcurrentTaskLimiter> ctl_hdd(NewConcurrentTaskLimiter("hdd_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt_ssd1(options);
ColumnFamilyOptions cf_opt_ssd2(options);
ColumnFamilyOptions cf_opt_hdd1(options);
ColumnFamilyOptions cf_opt_hdd2(options);
ColumnFamilyOptions cf_opt_hdd3(options);
// SSD CFs
cf_opt_ssd1.compaction_thread_limiter = ctl_ssd;
cf_opt_ssd2.compaction_thread_limiter = ctl_ssd;
// HDD CFs
cf_opt_hdd1.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd2.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd3.compaction_thread_limiter = ctl_hdd;
...
//
// The limiter is disabled by default (or set to nullptr explicitly)
//
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = nullptr;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4332
Differential Revision: D13226590
Pulled By: siying
fbshipit-source-id: 14307aec55b8bd59c8223d04aa6db3c03d1b0c1d
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
…ression
For `CompressionType` we have options `compression` and `bottommost_compression`. Thus, to make the compression options consitent with the compression type when bottommost_compression is enabled, we add the bottommost_compression_opts
Closes https://github.com/facebook/rocksdb/pull/3985
Reviewed By: riversand963
Differential Revision: D8385911
Pulled By: zhichao-cao
fbshipit-source-id: 07bc533dd61bcf1cef5927d8d62901c13d38d5fc
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
1. Remove redundant text.
2. Make terminology consistent across all comments and doc of RocksDB. Also do
our best to conform to conventions. Specifically, use 'callback' instead of
'call-back' [wikipedia](https://en.wikipedia.org/wiki/Callback_(computer_programming)).
Closes https://github.com/facebook/rocksdb/pull/3693
Differential Revision: D7560396
Pulled By: riversand963
fbshipit-source-id: ba8c251c487f4e7d1872a1a8dc680f9e35a6ffb8
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Level Compaction with TTL.
As of today, a file could exist in the LSM tree without going through the compaction process for a really long time if there are no updates to the data in the file's key range. For example, in certain use cases, the keys are not actually "deleted"; instead they are just set to empty values. There might not be any more writes to this "deleted" key range, and if so, such data could remain in the LSM for a really long time resulting in wasted space.
Introducing a TTL could solve this problem. Files (and, in turn, data) older than TTL will be scheduled for compaction when there is no other background work. This will make the data go through the regular compaction process and get rid of old unwanted data.
This also has the (good) side-effect of all the data in the non-bottommost level being newer than ttl, and all data in the bottommost level older than ttl. It could lead to more writes while reducing space.
This functionality can be controlled by the newly introduced column family option -- ttl.
TODO for later:
- Make ttl mutable
- Extend TTL to Universal compaction as well? (TTL is already supported in FIFO)
- Maybe deprecate CompactionOptionsFIFO.ttl in favor of this new ttl option.
Closes https://github.com/facebook/rocksdb/pull/3591
Differential Revision: D7275442
Pulled By: sagar0
fbshipit-source-id: dcba484717341200d419b0953dafcdf9eb2f0267
Summary:
Let me know if more test coverage is needed
Closes https://github.com/facebook/rocksdb/pull/3213
Differential Revision: D6457165
Pulled By: miasantreble
fbshipit-source-id: 3f944abff28aa7775237f1c4f61c64ccbad4eea9
Summary:
The motivation for this PR is to add to RocksDB support for differential (incremental) snapshots, as snapshot of the DB changes between two points in time (one can think of it as diff between to sequence numbers, or the diff D which can be thought of as an SST file or just set of KVs that can be applied to sequence number S1 to get the database to the state at sequence number S2).
This feature would be useful for various distributed storages layers built on top of RocksDB, as it should help reduce resources (time and network bandwidth) needed to recover and rebuilt DB instances as replicas in the context of distributed storages.
From the API standpoint that would like client app requesting iterator between (start seqnum) and current DB state, and reading the "diff".
This is a very draft PR for initial review in the discussion on the approach, i'm going to rework some parts and keep updating the PR.
For now, what's done here according to initial discussions:
Preserving deletes:
- We want to be able to optionally preserve recent deletes for some defined period of time, so that if a delete came in recently and might need to be included in the next incremental snapshot it would't get dropped by a compaction. This is done by adding new param to Options (preserve deletes flag) and new variable to DB Impl where we keep track of the sequence number after which we don't want to drop tombstones, even if they are otherwise eligible for deletion.
- I also added a new API call for clients to be able to advance this cutoff seqnum after which we drop deletes; i assume it's more flexible to let clients control this, since otherwise we'd need to keep some kind of timestamp < -- > seqnum mapping inside the DB, which sounds messy and painful to support. Clients could make use of it by periodically calling GetLatestSequenceNumber(), noting the timestamp, doing some calculation and figuring out by how much we need to advance the cutoff seqnum.
- Compaction codepath in compaction_iterator.cc has been modified to avoid dropping tombstones with seqnum > cutoff seqnum.
Iterator changes:
- couple params added to ReadOptions, to optionally allow client to request internal keys instead of user keys (so that client can get the latest value of a key, be it delete marker or a put), as well as min timestamp and min seqnum.
TableCache changes:
- I modified table_cache code to be able to quickly exclude SST files from iterators heep if creation_time on the file is less then iter_start_ts as passed in ReadOptions. That would help a lot in some DB settings (like reading very recent data only or using FIFO compactions), but not so much for universal compaction with more or less long iterator time span.
What's left:
- Still looking at how to best plug that inside DBIter codepath. So far it seems that FindNextUserKeyInternal only parses values as UserKeys, and iter->key() call generally returns user key. Can we add new API to DBIter as internal_key(), and modify this internal method to optionally set saved_key_ to point to the full internal key? I don't need to store actual seqnum there, but I do need to store type.
Closes https://github.com/facebook/rocksdb/pull/2999
Differential Revision: D6175602
Pulled By: mikhail-antonov
fbshipit-source-id: c779a6696ee2d574d86c69cec866a3ae095aa900
Summary:
ColumnFamilyOptions::compaction_options_fifo and all its sub-fields can be set dynamically now.
Some of the ways in which the fifo compaction options can be set are:
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024}"}})`
- `SetOptions({{"compaction_options_fifo", "{ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=1024;ttl=600;}"}})`
- `SetOptions({{"compaction_options_fifo", "{max_table_files_size=51;ttl=49;allow_compaction=true;}"}})`
Most of the code has been made generic enough so that it could be reused later to make universal options (and other such nested defined-types) dynamic with very few lines of parsing/serializing code changes.
Introduced a few new functions like `ParseStruct`, `SerializeStruct` and `GetStringFromStruct`.
The duplicate code in `GetStringFromDBOptions` and `GetStringFromColumnFamilyOptions` has been moved into `GetStringFromStruct`. So they become just simple wrappers now.
Closes https://github.com/facebook/rocksdb/pull/3006
Differential Revision: D6058619
Pulled By: sagar0
fbshipit-source-id: 1e8f78b3374ca5249bb4f3be8a6d3bb4cbc52f92
Summary:
Allow users to rate limit background work based on read bytes, written bytes, or sum of read and written bytes. Support these by changing the RateLimiter API, so no additional options were needed.
Closes https://github.com/facebook/rocksdb/pull/2433
Differential Revision: D5216946
Pulled By: ajkr
fbshipit-source-id: aec57a8357dbb4bfde2003261094d786d94f724e
Summary:
First cut for early review; there are few conceptual points to answer and some code structure issues.
For conceptual points -
- restriction-wise, we're going to disallow ingest_behind if (use_seqno_zero_out=true || disable_auto_compaction=false), the user is responsible to properly open and close DB with required params
- we wanted to ingest into reserved bottom most level. Should we fail fast if bottom level isn't empty, or should we attempt to ingest if file fits there key-ranges-wise?
- Modifying AssignLevelForIngestedFile seems the place we we'd handle that.
On code structure - going to refactor GenerateAndAddExternalFile call in the test class to allow passing instance of IngestionOptions, that's just going to incur lots of changes at callsites.
Closes https://github.com/facebook/rocksdb/pull/2144
Differential Revision: D4873732
Pulled By: lightmark
fbshipit-source-id: 81cb698106b68ef8797f564453651d50900e153a
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
