Summary:
The comments of snap_refresh_nanos advertise that the snapshot refresh feature will be disabled when the option is set to 0. This contract is however not honored in the code: https://github.com/facebook/rocksdb/pull/5278
The patch fixes that and also adds an assert to ensure that the feature is not used when the option is zero.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5724
Differential Revision: D16918185
Pulled By: maysamyabandeh
fbshipit-source-id: fec167287df7d85093e087fc39c0eb243e3bbd7e
Summary:
Recently readahead is introduced for checksum verifying. However, users cannot override the setting for the checksum verifying before external SST file ingestion. Introduce a new option for the purpose.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5721
Test Plan: Add a new unit test for it.
Differential Revision: D16906896
fbshipit-source-id: 218ec37001ddcc05411cefddbe233d15ab308476
Summary:
We see this TSAN warning:
WARNING: ThreadSanitizer: data race (pid=282806)
Write of size 8 at 0x7b6c00000e38 by thread T16 (mutexes: write M1023578822185846136):
#0 operator delete(void*) <null> (libtsan.so.0+0x0000000795f8)
https://github.com/facebook/rocksdb/issues/1 rocksdb::DBImpl::BackgroundFlush(bool*, rocksdb::JobContext*, rocksdb::LogBuffer*, rocksdb::FlushReason*, rocksdb::Env::Priority) db/db_impl/db_impl_compaction_flush.cc:2202 (db_flush_test+0x00000060b462)
https://github.com/facebook/rocksdb/issues/2 rocksdb::DBImpl::BackgroundCallFlush(rocksdb::Env::Priority) db/db_impl/db_impl_compaction_flush.cc:2226 (db_flush_test+0x00000060cbd8)
https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::BGWorkFlush(void*) db/db_impl/db_impl_compaction_flush.cc:2073 (db_flush_test+0x00000060d5ac)
......
Previous atomic write of size 4 at 0x7b6c00000e38 by main thread:
#0 __tsan_atomic32_fetch_sub <null> (libtsan.so.0+0x00000006d721)
https://github.com/facebook/rocksdb/issues/1 std::__atomic_base<int>::fetch_sub(int, std::memory_order) /mnt/gvfs/third-party2/libgcc/c67031f0f739ac61575a061518d6ef5038f99f90/7.x/platform007/5620abc/include/c++/7.3.0/bits/atomic_base.h:524 (db_flush_test+0x0000005f9e38)
https://github.com/facebook/rocksdb/issues/2 rocksdb::ColumnFamilyData::Unref() db/column_family.h:286 (db_flush_test+0x0000005f9e38)
https://github.com/facebook/rocksdb/issues/3 rocksdb::DBImpl::FlushMemTable(rocksdb::ColumnFamilyData*, rocksdb::FlushOptions const&, rocksdb::FlushReason, bool) db/db_impl/db_impl_compaction_flush.cc:1624 (db_flush_test+0x0000005f9e38)
https://github.com/facebook/rocksdb/issues/4 rocksdb::DBImpl::TEST_FlushMemTable(rocksdb::ColumnFamilyData*, rocksdb::FlushOptions const&) db/db_impl/db_impl_debug.cc:127 (db_flush_test+0x00000061ace9)
https://github.com/facebook/rocksdb/issues/5 rocksdb::DBFlushTest_CFDropRaceWithWaitForFlushMemTables_Test::TestBody() db/db_flush_test.cc:320 (db_flush_test+0x0000004b44e5)
https://github.com/facebook/rocksdb/issues/6 void testing::internal::HandleSehExceptionsInMethodIfSupported<testing::Test, void>(testing::Test*, void (testing::Test::*)(), char const*) third-party/gtest-1.7.0/fused-src/gtest/gtest-all.cc:3824 (db_flush_test+0x000000be2988)
......
It's still very clear the cause of the warning is because that TSAN treats results from relaxed atomic::fetch_sub() as non-atomic with the operation itself. We can make it more explicit by bumping up the order to CS.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5723
Test Plan: Run all existing test.
Differential Revision: D16908250
fbshipit-source-id: bf17d39ed19058372bdf97f6440a743f88153021
Summary:
Right now VerifyChecksum() doesn't do read-ahead. In some use cases, users won't be able to achieve good performance. With this change, by default, RocksDB will do a default readahead, and users will be able to overwrite the readahead size by passing in a ReadOptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5713
Test Plan: Add a new unit test.
Differential Revision: D16860874
fbshipit-source-id: 0cff0fe79ac855d3d068e6ccd770770854a68413
Summary:
VersionSet::ApproximateSize doesn't need to create two separate index iterators and do binary search for each in BlockBasedTable. So BlockBasedTable::ApproximateSize was added that creates the iterator once and uses it to calculate the data size between start and end keys.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5693
Differential Revision: D16774056
Pulled By: elipoz
fbshipit-source-id: 53ce262e1a057788243bf30cd9b8aa6581df1a18
Summary:
Add a command in ldb so that users can print out tombstones in SST files.
In order to test the code, change the interface of LDBCommandRunner::RunCommand() so that it doesn't return from the program, but return the status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5615
Test Plan: Add a new unit test
Differential Revision: D16550326
fbshipit-source-id: 88ddfe6984bdcbb3a528abdd115089df09eba52e
Summary:
Previously, the end key of a range deletion tombstone was considered exclusive for the purposes of deletion, but considered inclusive when checking if two SSTables overlap. For example, an SSTable with a range deletion tombstone [a, b) would be considered overlapping with an SSTable with a range deletion tombstone [b, c). This commit fixes this check.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5649
Differential Revision: D16808765
Pulled By: anand1976
fbshipit-source-id: 5c7ad1c027e4f778d35070e5dae1b8e6037e0d68
Summary:
PR https://github.com/facebook/rocksdb/pull/5676 added some test coverage for `TEST_ENV_URI`, which unfortunately isn't supported in lite mode, causing some test failures for rocksdb lite. For example,
```
db/db_test_util.cc: In constructor ‘rocksdb::DBTestBase::DBTestBase(std::__cxx11::string)’:
db/db_test_util.cc:57:16: error: ‘ObjectRegistry’ has not been declared
Status s = ObjectRegistry::NewInstance()->NewSharedObject(test_env_uri,
^
```
This PR fixes these errors by excluding the new code from test functions for lite mode.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5686
Differential Revision: D16749000
Pulled By: miasantreble
fbshipit-source-id: e8b3088c31a78b3dffc5fe7814261909d2c3e369
Summary:
Most existing RocksDB unit tests run on `Env::Default()`. It will be useful to port the unit tests to non-default environments, e.g. `HdfsEnv`, etc.
This pull request is one step towards this goal. If RocksDB unit tests are built with a static library exposing a function `RegisterCustomObjects()`, then it is possible to implement custom object registrar logic in the library. RocksDB unit test can call `RegisterCustomObjects()` at the beginning.
By default, `ROCKSDB_UNITTESTS_WITH_CUSTOM_OBJECTS_FROM_STATIC_LIBS` is not defined, thus this PR has no impact on existing RocksDB because `RegisterCustomObjects()` is a noop.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$make check
```
All unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5676
Differential Revision: D16679157
Pulled By: riversand963
fbshipit-source-id: aca571af3fd0525277cdc674248d0fe06e060f9d
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
Currently in `DBImpl::PurgeObsoleteFiles`, the list of candidate files is create through a combination of calling LogFileName using `log_delete_files` and `full_scan_candidate_files`.
In full_scan_candidate_files, the filenames look like this
{file_name = "074715.log", file_path = "/txlogs/3306"},
but LogFileName produces filenames like this that prepends a slash:
{file_name = "/074715.log", file_path = "/txlogs/3306"},
This confuses the dedup step here: bb4178066d/db/db_impl/db_impl_files.cc (L339-L345)
Because duplicates still exist, DeleteFile is called on the same file twice, and hits an error on the second try. Error message: Failed to mark /txlogs/3302/764418.log as trash.
The root cause is the use of `kDumbDbName` when generating file names, it creates file names like /074715.log. This PR removes the use of `kDumbDbName` and create paths without leading '/' when dbname can be ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5603
Test Plan: make check
Differential Revision: D16413203
Pulled By: miasantreble
fbshipit-source-id: 6ba8288382c55f7d5e3892d722fc94b57d2e4491
Summary:
MergeOperatorPinningTest.Randomized frequently times out under TSAN
because it tests ~40 option configurations sequentially in a loop. The
patch parallelizes the tests of the various configurations to make the
test complete faster.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5659
Test Plan: Tested using buck test mode/dev-tsan ...
Differential Revision: D16587518
Pulled By: ltamasi
fbshipit-source-id: 65bd25c0ad9a23587fed5592e69c1a0097fa27f6
Summary:
Add savepoint support when the current transaction has flushed unprepared batches.
Rolling back to savepoint is similar to rolling back a transaction. It requires the set of keys that have changed since the savepoint, re-reading the keys at the snapshot at that savepoint, and the restoring the old keys by writing out another unprepared batch.
For this strategy to work though, we must be capable of reading keys at a savepoint. This does not work if keys were written out using the same sequence number before and after a savepoint. Therefore, when we flush out unprepared batches, we must split the batch by savepoint if any savepoints exist.
eg. If we have the following:
```
Put(A)
Put(B)
Put(C)
SetSavePoint()
Put(D)
Put(E)
SetSavePoint()
Put(F)
```
Then we will write out 3 separate unprepared batches:
```
Put(A) 1
Put(B) 1
Put(C) 1
Put(D) 2
Put(E) 2
Put(F) 3
```
This is so that when we rollback to eg. the first savepoint, we can just read keys at snapshot_seq = 1.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5627
Differential Revision: D16584130
Pulled By: lth
fbshipit-source-id: 6d100dd548fb20c4b76661bd0f8a2647e64477fa
Summary:
In some cases, we don't have to get really accurate number. Something like 10% off is fine, we can create a new option for that use case. In this case, we can calculate size for full files first, and avoid estimation inside SST files if full files got us a huge number. For example, if we already covered 100GB of data, we should be able to skip partial dives into 10 SST files of 30MB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5609
Differential Revision: D16433481
Pulled By: elipoz
fbshipit-source-id: 5830b31e1c656d0fd3a00d7fd2678ddc8f6e601b
Summary:
The `TransactionTest.MultiGetBatchedTest` were failing with unprepared batches because we were not using the correct callbacks. Override MultiGet to pass down the correct ReadCallback. A similar problem is also fixed in WritePrepared.
This PR also fixes an issue similar to (https://github.com/facebook/rocksdb/pull/5147), but for MultiGet instead of Get.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5634
Differential Revision: D16552674
Pulled By: lth
fbshipit-source-id: 736eaf8e919c6b13d5f5655b1c0d36b57ad04804
Summary:
The new DB::GetApproximateSizes with SizeApproximationOptions argument, which allows to add more options/knobs to the DB::GetApproximateSizes call (beyond only the include_flags)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5626
Differential Revision: D16496913
Pulled By: elipoz
fbshipit-source-id: ee8c6c182330a285fa056ecfc3905a592b451720
Summary:
In previous https://github.com/facebook/rocksdb/issues/5079, we added user-specified timestamp to `DB::Get()` and `DB::Put()`. Limitation is that these two functions may cause extra memory allocation and key copy. The reason is that `WriteBatch` does not allocate extra memory for timestamps because it is not aware of timestamp size, and we did not provide an API to assign/update timestamp of each key within a `WriteBatch`.
We address these issues in this PR by doing the following.
1. Add a `timestamp_size_` to `WriteBatch` so that `WriteBatch` can take timestamps into account when calling `WriteBatch::Put`, `WriteBatch::Delete`, etc.
2. Add APIs `WriteBatch::AssignTimestamp` and `WriteBatch::AssignTimestamps` so that application can assign/update timestamps for each key in a `WriteBatch`.
3. Avoid key copy in `GetImpl` by adding new constructor to `LookupKey`.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
If the API extension looks good, I will add more unit tests.
Some simple benchmark using db_bench.
```
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$rm -rf /dev/shm/dbbench/* && TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000 -disable_wal=true
```
Master is at a78503bd6c.
```
| | readrandom | fillrandom |
| master | 15.53 MB/s | 25.97 MB/s |
| PR5502 | 16.70 MB/s | 25.80 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5502
Differential Revision: D16340894
Pulled By: riversand963
fbshipit-source-id: 51132cf792be07d1efc3ac33f5768c4ee2608bb8
Summary:
RocksDB has historically stored uncompression dictionary objects in the block
cache as opposed to storing just the block contents. This neccesitated
evicting the object upon table close. With the new code, only the raw blocks
are stored in the cache, eliminating the need for eviction.
In addition, the patch makes the following improvements:
1) Compression dictionary blocks are now prefetched/pinned similarly to
index/filter blocks.
2) A copy operation got eliminated when the uncompression dictionary is
retrieved.
3) Errors related to retrieving the uncompression dictionary are propagated as
opposed to silently ignored.
Note: the patch temporarily breaks the compression dictionary evicition stats.
They will be fixed in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5584
Test Plan: make asan_check
Differential Revision: D16344151
Pulled By: ltamasi
fbshipit-source-id: 2962b295f5b19628f9da88a3fcebbce5a5017a7b
Summary:
1. Avoid creating the iterator in order to call BlockBasedTable::ApproximateOffsetOf(). Instead, directly call into it.
2. Optimize BlockBasedTable::ApproximateOffsetOf() keeps the index block iterator in stack.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5613
Differential Revision: D16442660
Pulled By: elipoz
fbshipit-source-id: 9320be3e918c139b10e758cbbb684706d172e516
Summary:
There are a number of fixes in this PR (with most bugs found via the added stress tests):
1. Re-enable reseek optimization. This was initially disabled to avoid infinite loops in https://github.com/facebook/rocksdb/pull/3955 but this can be resolved by remembering not to reseek after a reseek has already been done. This problem only affects forward iteration in `DBIter::FindNextUserEntryInternal`, as we already disable reseeking in `DBIter::FindValueForCurrentKeyUsingSeek`.
2. Verify that ReadOption.snapshot can be safely used for iterator creation. Some snapshots would not give correct results because snaphsot validation would not be enforced, breaking some assumptions in Prev() iteration.
3. In the non-snapshot Get() case, reads done at `LastPublishedSequence` may not be enough, because unprepared sequence numbers are not published. Use `std::max(published_seq, max_visible_seq)` to do lookups instead.
4. Add stress test to test reading own writes.
5. Minor bug in the allow_concurrent_memtable_write case where we forgot to pass in batch_per_txn_.
6. Minor performance optimization in `CalcMaxUnpreparedSequenceNumber` by assigning by reference instead of value.
7. Add some more comments everywhere.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5573
Differential Revision: D16276089
Pulled By: lth
fbshipit-source-id: 18029c944eb427a90a87dee76ac1b23f37ec1ccb
Summary:
Right now, users cannot take advantage of row cache, unless no snapshot is used, or Get() is repeated for the same snapshots. This limits the usage of row cache.
This change eliminate this restriction in some cases. If the snapshot used is newer than the largest sequence number in the file, and write callback function is not registered, the same row cache key is used as no snapshot is given. We still need the callback function restriction for now because the callback function may filter out different keys for different snapshots even if the snapshots are new.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5600
Test Plan: Add a unit test.
Differential Revision: D16386616
fbshipit-source-id: 6b7d214bd215d191b03ccf55926ad4b703ec2e53
Summary:
Added log_readahead_size option to control prefetching for Log::Reader.
This is mostly useful for reading a remotely located log, as it can save the number of round-trips when reading it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5592
Differential Revision: D16362989
Pulled By: elipoz
fbshipit-source-id: c5d4d5245a44008cd59879640efff70c091ad3e8
Summary:
Refresh of the earlier change here - https://github.com/facebook/rocksdb/issues/5135
This is a review request for code change needed for - https://github.com/facebook/rocksdb/issues/3469
"Add support for taking snapshot of a column family and creating column family from a given CF snapshot"
We have an implementation for this that we have been testing internally. We have two new APIs that together provide this functionality.
(1) ExportColumnFamily() - This API is modelled after CreateCheckpoint() as below.
// Exports all live SST files of a specified Column Family onto export_dir,
// returning SST files information in metadata.
// - SST files will be created as hard links when the directory specified
// is in the same partition as the db directory, copied otherwise.
// - export_dir should not already exist and will be created by this API.
// - Always triggers a flush.
virtual Status ExportColumnFamily(ColumnFamilyHandle* handle,
const std::string& export_dir,
ExportImportFilesMetaData** metadata);
Internally, the API will DisableFileDeletions(), GetColumnFamilyMetaData(), Parse through
metadata, creating links/copies of all the sst files, EnableFileDeletions() and complete the call by
returning the list of file metadata.
(2) CreateColumnFamilyWithImport() - This API is modeled after IngestExternalFile(), but invoked only during a CF creation as below.
// CreateColumnFamilyWithImport() will create a new column family with
// column_family_name and import external SST files specified in metadata into
// this column family.
// (1) External SST files can be created using SstFileWriter.
// (2) External SST files can be exported from a particular column family in
// an existing DB.
// Option in import_options specifies whether the external files are copied or
// moved (default is copy). When option specifies copy, managing files at
// external_file_path is caller's responsibility. When option specifies a
// move, the call ensures that the specified files at external_file_path are
// deleted on successful return and files are not modified on any error
// return.
// On error return, column family handle returned will be nullptr.
// ColumnFamily will be present on successful return and will not be present
// on error return. ColumnFamily may be present on any crash during this call.
virtual Status CreateColumnFamilyWithImport(
const ColumnFamilyOptions& options, const std::string& column_family_name,
const ImportColumnFamilyOptions& import_options,
const ExportImportFilesMetaData& metadata,
ColumnFamilyHandle** handle);
Internally, this API creates a new CF, parses all the sst files and adds it to the specified column family, at the same level and with same sequence number as in the metadata. Also performs safety checks with respect to overlaps between the sst files being imported.
If incoming sequence number is higher than current local sequence number, local sequence
number is updated to reflect this.
Note, as the sst files is are being moved across Column Families, Column Family name in sst file
will no longer match the actual column family on destination DB. The API does not modify Column
Family name or id in the sst files being imported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5495
Differential Revision: D16018881
fbshipit-source-id: 9ae2251025d5916d35a9fc4ea4d6707f6be16ff9
Summary:
RandomAccessFileReader.for_compaction_ doesn't seem to be used anymore. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5572
Test Plan: USE_CLANG=1 make all check -j
Differential Revision: D16286178
fbshipit-source-id: aa338049761033dfbe5e8b1707bbb0be2df5be7e
Summary:
Currently, when the block cache is used for the filter block, it is not
really the block itself that is stored in the cache but a FilterBlockReader
object. Since this object is not pure data (it has, for instance, pointers that
might dangle, including in one case a back pointer to the TableReader), it's not
really sharable. To avoid the issues around this, the current code erases the
cache entries when the TableReader is closed (which, BTW, is not sufficient
since a concurrent TableReader might have picked up the object in the meantime).
Instead of doing this, the patch moves the FilterBlockReader out of the cache
altogether, and decouples the filter reader object from the filter block.
In particular, instead of the TableReader owning, or caching/pinning the
FilterBlockReader (based on the customer's settings), with the change the
TableReader unconditionally owns the FilterBlockReader, which in turn
owns/caches/pins the filter block. This change also enables us to reuse the code
paths historically used for data blocks for filters as well.
Note:
Eviction statistics for filter blocks are temporarily broken. We plan to fix this in a
separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5504
Test Plan: make asan_check
Differential Revision: D16036974
Pulled By: ltamasi
fbshipit-source-id: 770f543c5fb4ed126fd1e04bfd3809cf4ff9c091
Summary:
`wal_batch.writeBatchPtr.release()` gives up the ownership of the original `WriteBatch`, but there is no new owner, which causes memory leak.
The patch is simple. Removing `release()` prevent ownership change. `std::move` is for speed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5515
Differential Revision: D16264281
Pulled By: riversand963
fbshipit-source-id: 51c556b7a1c977325c3aa24acb636303847151fa
Summary:
- Provide assignment operator in CompactionStats
- Provide a copy constructor for FileDescriptor
- Remove std::move from "return std::move(t)" in BoundedQueue
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5553
Differential Revision: D16230170
fbshipit-source-id: fd7c6e52390b2db1be24141e25649cf62424d078
Summary:
https://github.com/facebook/rocksdb/pull/5520 caused a buffer overflow bug in DBWALTest.kTolerateCorruptedTailRecords. Fix it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5550
Test Plan: Run the test in UBSAN. It used to fail. Not it succeeds.
Differential Revision: D16165516
fbshipit-source-id: 42c56a6bc64eb091f054b87757fcbef60da825f7
Summary:
Previously `GetAllKeyVersions()` supports default column family only. This PR add support for other column families.
Test plan (devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32 db_basic_test
$./db_basic_test --gtest_filter=DBBasicTest.GetAllKeyVersions
```
All other unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5544
Differential Revision: D16147551
Pulled By: riversand963
fbshipit-source-id: 5a61aece2a32d789e150226a9b8d53f4a5760168
Summary:
1. Cleanup WAL trash files on open
2. Don't apply deletion rate limit if WAL dir is different from db dir
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5520
Test Plan: Add new unit tests and make check
Differential Revision: D16096750
Pulled By: anand1976
fbshipit-source-id: 6f07858ad864b754b711db416f0389c45ede599b
Summary:
Since https://github.com/facebook/rocksdb/issues/5468 `LevelIterator` compare lower bound and file smallest key on `NewFileIterator` and cache the result to reduce per key lower bound check. However when iterate across file boundary, it doesn't update the cached result since `Valid()=false` because `Valid()` still reflect the status of the previous file iterator. Fixing it by remove the `Valid()` check from `CheckMayBeOutOfLowerBound()`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5540
Test Plan:
See the new test.
Signed-off-by: Yi Wu <yiwu@pingcap.com>
Differential Revision: D16127653
fbshipit-source-id: a0691e1164658d485c17971aaa97028812f74678
Summary:
This PR associates a unique id with Get and MultiGet. This enables us to track how many blocks a Get/MultiGet request accesses. We can also measure the impact of row cache vs block cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5514
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32
Differential Revision: D16032681
Pulled By: HaoyuHuang
fbshipit-source-id: 775b05f4440badd58de6667e3ec9f4fc87a0af4c
Summary:
Previously, if the jemalloc was built with nonempty string for
`--with-jemalloc-prefix`, then `HasJemalloc()` would return false on
Linux, so jemalloc would not be used at runtime. On Mac, it would cause
a linker failure due to no definitions found for the weak functions
declared in "port/jemalloc_helper.h". This should be a rare problem
because (1) on Linux the default `--with-jemalloc-prefix` value is the
empty string, and (2) Homebrew's build explicitly sets
`--with-jemalloc-prefix` to the empty string.
However, there are cases where `--with-jemalloc-prefix` is nonempty.
For example, when building jemalloc from source on Mac, the default
setting is `--with-jemalloc-prefix=je_`. Such jemalloc builds should be
usable by RocksDB.
The fix is simple. Defining `JEMALLOC_MANGLE` before including
"jemalloc.h" causes it to define unprefixed symbols that are aliases for
each of the prefixed symbols. Thanks to benesch for figuring this out
and explaining it to me.
Fixes https://github.com/facebook/rocksdb/issues/1462.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5521
Test Plan:
build jemalloc with prefixed symbols:
```
$ ./configure --with-jemalloc-prefix=lol
$ make
```
compile rocksdb against it:
```
$ WITH_JEMALLOC_FLAG=1 JEMALLOC=1 EXTRA_LDFLAGS="-L/home/andrew/jemalloc/lib/" EXTRA_CXXFLAGS="-I/home/andrew/jemalloc/include/" make -j12 ./db_bench
```
run db_bench and verify jemalloc actually used:
```
$ ./db_bench -benchmarks=fillrandom -statistics=true -dump_malloc_stats=true -stats_dump_period_sec=1
$ grep jemalloc /tmp/rocksdbtest-1000/dbbench/LOG
2019/06/29-12:20:52.088658 7fc5fb7f6700 [_impl/db_impl.cc:837] ___ Begin jemalloc statistics ___
...
```
Differential Revision: D16092758
fbshipit-source-id: c2c358346190ed62ceb2a3547a6c4c180b12f7c4
Summary:
This is to prevent bg flush thread from unrefing and deleting the cfd that has been dropped by a concurrent thread.
Before RocksDB calls `DBImpl::WaitForFlushMemTables`, we should increase the refcount of each `ColumnFamilyData` so that its ref count will not drop to 0 even if the column family is dropped by another thread. Otherwise the bg flush thread can deref the cfd and deletes it, causing a segfault in `WaitForFlushMemtables` upon accessing `cfd`.
Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32
$make check
```
All unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5513
Differential Revision: D16062898
Pulled By: riversand963
fbshipit-source-id: 37dc511f1dc99f036d0201bbd7f0a8f5677c763d
Summary:
WAL records RocksDB writes to all column families. When user flushes a a column family, the old WAL will not accept new writes but cannot be deleted yet because it may still contain live data for other column families. (See https://github.com/facebook/rocksdb/wiki/Write-Ahead-Log#life-cycle-of-a-wal for detailed explanation)
Because of this, if there is a column family that receive very infrequent writes and no manual flush is called for it, it could prevent a lot of WALs from being deleted. PR https://github.com/facebook/rocksdb/pull/5046 introduced persistent stats column family which is a good example of such column families. Depending on the config, it may have long intervals between writes, and user is unaware of it which makes it difficult to call manual flush for it.
This PR addresses the problem for persistent stats column family by forcing a flush for persistent stats column family when 1) another column family is flushed 2) persistent stats column family's log number is the smallest among all column families, this way persistent stats column family will keep advancing its log number when necessary, allowing RocksDB to delete old WAL files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5509
Differential Revision: D16045896
Pulled By: miasantreble
fbshipit-source-id: 286837b633e988417f0096ff38384742d3b40ef4
Summary:
Enhancement to MultiGet batching to read data blocks required for keys in a batch in parallel from disk. It uses Env::MultiRead() API to read multiple blocks and reduce latency.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5464
Test Plan:
1. make check
2. make asan_check
3. make asan_crash
Differential Revision: D15911771
Pulled By: anand1976
fbshipit-source-id: 605036b9af0f90ca0020dc87c3a86b4da6e83394
Summary:
Add C binding for secondary instance as well as unit test.
Test plan (on devserver)
```
$make clean && COMPILE_WITH_ASAN=1 make -j20 all
$./c_test
$make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5505
Differential Revision: D16000043
Pulled By: riversand963
fbshipit-source-id: 3361ef6bfdf4ce12438cee7290a0ac203b5250bd
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
It it not safe to assume application had sync the SST file before ingest it into DB. Also the directory to put the ingested file needs to be fsync, otherwise the file can be lost. For integrity of RocksDB we need to sync the ingested file and directory before apply the change to manifest.
Also syncing after writing global sequence when write_global_seqno=true was removed in https://github.com/facebook/rocksdb/issues/4172. Adding it back.
Fixes https://github.com/facebook/rocksdb/issues/5287.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5435
Test Plan:
Test ingest file with ldb command and observe fsync/fdatasync in strace output. Tried both move_files=true and move_files=false.
https://gist.github.com/yiwu-arbug/650a4023f57979056d83485fa863bef9
More test suggestions are welcome.
Differential Revision: D15941675
Pulled By: riversand963
fbshipit-source-id: 389533f3923065a96df2cdde23ff4724a1810d78
Summary:
This PR adds more callers for table readers. These information are only used for block cache analysis so that we can know which caller accesses a block.
1. It renames the BlockCacheLookupCaller to TableReaderCaller as passing the caller from upstream requires changes to table_reader.h and TableReaderCaller is a more appropriate name.
2. It adds more table reader callers in table/table_reader_caller.h, e.g., kCompactionRefill, kExternalSSTIngestion, and kBuildTable.
This PR is long as it requires modification of interfaces in table_reader.h, e.g., NewIterator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5454
Test Plan: make clean && COMPILE_WITH_ASAN=1 make check -j32.
Differential Revision: D15819451
Pulled By: HaoyuHuang
fbshipit-source-id: b6caa704c8fb96ddd15b9a934b7e7ea87f88092d
Summary:
`Block::restart_index_`, `Block::restarts_`, and `Block::current_` are defined as uint32_t but `BlockBasedTableOptions::block_size` is defined as a size_t so user might see corruption as in https://github.com/facebook/rocksdb/issues/5486.
This PR adds a check in `BlockBasedTableFactory::SanitizeOptions` to disallow such configurations.
yiwu-arbug
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5492
Differential Revision: D15914047
Pulled By: miasantreble
fbshipit-source-id: c943f153d967e15aee7f2795730ab8259e2be201
Summary:
Currently the read-ahead logic for user reads and compaction reads go through different code paths where compaction reads create new table readers and use `ReadaheadRandomAccessFile`. This change is to unify read-ahead logic to use read-ahead in BlockBasedTableReader::InitDataBlock(). As a result of the change `ReadAheadRandomAccessFile` class and `new_table_reader_for_compaction_inputs` option will no longer be used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5431
Test Plan:
make check
Here is the benchmarking - https://gist.github.com/vjnadimpalli/083cf423f7b6aa12dcdb14c858bc18a5
Differential Revision: D15772533
Pulled By: vjnadimpalli
fbshipit-source-id: b71dca710590471ede6fb37553388654e2e479b9
Summary:
When tailing the WAL with TransactionLogIterator, it used to return Corruption status to indicate that the WAL has new tail that is not visible to the iterator, which is a misleading status. The patch replaces it with TryAgain which is more descriptive of a status, indicating that the user needs to create a new iterator to fetch the recent tail.
Fixes https://github.com/facebook/rocksdb/issues/5455
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5474
Differential Revision: D15898953
Pulled By: maysamyabandeh
fbshipit-source-id: 40966f6457cb539e1aeb104daeada6b0e46059fc
Summary:
While the secondary is replaying after the primary, the primary may switch to a new MANIFEST. The secondary is already able to detect and follow the primary to the new MANIFEST. However, the current implementation has a bug, described as follows.
The new MANIFEST's first records have been generated by VersionSet::WriteSnapshot to describe the current state of the column families and the db as of the MANIFEST creation. Since the secondary instance has already finished recovering upon start, there is no need for the secondary to process these records. Actually, if the secondary were to replay these records, the secondary may end up adding the same SST files **again** to each column family, causing consistency checks done by VersionBuilder to fail. Therefore, we record the number of records to skip at the beginning of the new MANIFEST and ignore them.
Test plan (on dev server)
```
$make clean && make -j32 all
$./db_secondary_test
```
All existing unit tests must pass as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5472
Differential Revision: D15866771
Pulled By: riversand963
fbshipit-source-id: a1eec4837fb2ad13059398efb0f437e74fd53bed
Summary:
recent commit 671d15cbdd introduced some test failures:
```
===== Running stats_history_test
[==========] Running 9 tests from 1 test case.
[----------] Global test environment set-up.
[----------] 9 tests from StatsHistoryTest
[ RUN ] StatsHistoryTest.RunStatsDumpPeriodSec
monitoring/stats_history_test.cc:63: Failure
dbfull()->SetDBOptions({{"stats_dump_period_sec", "0"}})
Not implemented: Not supported in ROCKSDB LITE
db/db_options_test.cc:28:11: error: unused variable 'kMicrosInSec' [-Werror,-Wunused-const-variable]
const int kMicrosInSec = 1000000;
```
This PR fixes these failures
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5477
Differential Revision: D15871814
Pulled By: miasantreble
fbshipit-source-id: 0a7023914d2c1784d9d2d3f5bfb47310d4855394
Summary:
`DBImplSecondary` calls `CheckConsistency()` during open. In the past, `DBImplSecondary` did not override this function thus `DBImpl::CheckConsistency()` is called.
The following can happen. The secondary instance is performing consistency check which calls `GetFileSize(file_path)` but the file at `file_path` is deleted by the primary instance. `DBImpl::CheckConsistency` does not account for this and fails the consistency check. This is undesirable. The solution is that, we call `DBImpl::CheckConsistency()` first. If it passes, then we are good. If not, we give it a second chance and handles the case of file(s) being deleted.
Test plan (on dev server):
```
$make clean && make -j20 all
$./db_secondary_test
```
All other existing unit tests must pass as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5469
Differential Revision: D15861845
Pulled By: riversand963
fbshipit-source-id: 507d72392508caed3cd003bb2e2aa43f993dd597
Summary:
This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046
Differential Revision: D15863138
Pulled By: miasantreble
fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b
Summary:
It seems like CF Options are not properly validated when creating a new column family with `CreateColumnFamily` API; only a selected few checks are done. Calling `ColumnFamilyData::ValidateOptions`, which is the single source for all CFOptions validations, will help fix this. (`ColumnFamilyData::ValidateOptions` is already called at the time of `DB::Open`).
**Test Plan:**
Added a new test: `DBTest.CreateColumnFamilyShouldFailOnIncompatibleOptions`
```
TEST_TMPDIR=/dev/shm ./db_test --gtest_filter=DBTest.CreateColumnFamilyShouldFailOnIncompatibleOptions
```
Also ran gtest-parallel to make sure the new test is not flaky.
```
TEST_TMPDIR=/dev/shm ~/gtest-parallel/gtest-parallel ./db_test --gtest_filter=DBTest.CreateColumnFamilyShouldFailOnIncompatibleOptions --repeat=10000
[10000/10000] DBTest.CreateColumnFamilyShouldFailOnIncompatibleOptions (15 ms)
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5453
Differential Revision: D15816851
Pulled By: sagar0
fbshipit-source-id: 9e702b9850f5c4a7e0ef8d39e1e6f9b81e7fe1e5
Summary:
This PR integrates the block cache tracer class into db_impl.cc.
db_impl.cc contains a member variable of AtomicBlockCacheTraceWriter class and passes its reference to the block_based_table_reader.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5433
Differential Revision: D15728016
Pulled By: HaoyuHuang
fbshipit-source-id: 23d5659e8c82d556833dcc1a5558aac8c1f7db71
Summary:
Calling PurgeObsoleteFiles with a JobContext for which HaveSomethingToDelete
is false is a precondition violation. This would trigger an assertion in debug builds;
however, in release builds with assertions disabled, this can result in the
pending_purge_obsolete_files_ counter in DBImpl underflowing, which in turn can lead
to the process hanging during database close.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5448
Differential Revision: D15792569
Pulled By: ltamasi
fbshipit-source-id: 82d92c9b4f6a9efcdc69dbb3d5a52a1ae2dd2472
Summary:
In secondary mode, it is possible that the secondary lists the primary's WAL
directory, finds a WAL and tries to open it. It is possible that the primary
deletes the WAL after secondary listing dir but before the secondary opening
it. Then the secondary will fail to open the WAL file with a PathNotFound
status. In this case, we can return OK without replaying WAL and optionally
replay more MANIFEST.
Test Plan (on my dev machine):
Without this PR, the following will fail several times out of 100 runs.
```
~/gtest-parallel/gtest-parallel -r 100 -w 16 ./db_secondary_test --gtest_filter=DBSecondaryTest.SwitchToNewManifestDuringOpen
```
With this PR, the above should always succeed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5323
Differential Revision: D15763878
Pulled By: riversand963
fbshipit-source-id: c7164fa7cb8d9001abc258b6a2dc93613e4f38ff
Summary:
If a memtable definitely covers a key, there isn't a need to check older memtables.
We can skip them by checking the earliest sequence number.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4941
Differential Revision: D13932666
fbshipit-source-id: b9d52f234b8ad9dd3bf6547645cd457175a3ca9b
Summary:
This affects our "no compression" automated tests. Since PR #5368, DBTest.DynamicMiscOptions has been failing with:
db/db_test.cc:4889: Failure
dbfull()->SetOptions({{"compression", "kSnappyCompression"}})
Invalid argument: Compression type Snappy is not linked with the binary.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5438
Differential Revision: D15752100
Pulled By: ltamasi
fbshipit-source-id: 3f19eff7cafc03b333965be0203c5853d2a9cb71
Summary:
To avoid deadlock mutex_ should never be acquired before log_write_mutex_. The patch documents that and also fixes one case in ::FlushWAL that acquires mutex_ through ::WriteStatusCheck when it already holds lock on log_write_mutex_.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5437
Differential Revision: D15749722
Pulled By: maysamyabandeh
fbshipit-source-id: f57b69c44b4b80cc6d7ddf3d3fdf4a9eb5a5a45a
Summary:
FlushScheduler's methods are instrumented with debug-time locks to check the scheduler state against a simple container definition. Since https://github.com/facebook/rocksdb/pull/2286 the scope of such locks are widened to the entire methods' body. The result is that the concurrency tested during testing (in debug mode) is stricter than the concurrency level manifested at runtime (in release mode).
The patch reverts this change to reduce the scope of such locks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5372
Differential Revision: D15545831
Pulled By: maysamyabandeh
fbshipit-source-id: 01d69191afb1dd807d4bdc990fc74813ae7b5426
Summary:
Use `CreateLoggerFromOptions` function to reduce code duplication.
Test plan (on my machine)
```
$make clean && make -j32 db_secondary_test
$KEEP_DB=1 ./db_secondary_test
```
Verify all info logs of the secondary instance are properly logged.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5427
Differential Revision: D15748922
Pulled By: riversand963
fbshipit-source-id: bad7261df1b8373efc504f141efc7871e375a311
Summary:
BlockCacheLookupContext only contains the caller for now.
We will trace block accesses at five places:
1. BlockBasedTable::GetFilter.
2. BlockBasedTable::GetUncompressedDict.
3. BlockBasedTable::MaybeReadAndLoadToCache. (To trace access on data, index, and range deletion block.)
4. BlockBasedTable::Get. (To trace the referenced key and whether the referenced key exists in a fetched data block.)
5. BlockBasedTable::MultiGet. (To trace the referenced key and whether the referenced key exists in a fetched data block.)
We create the context at:
1. BlockBasedTable::Get. (kUserGet)
2. BlockBasedTable::MultiGet. (kUserMGet)
3. BlockBasedTable::NewIterator. (either kUserIterator, kCompaction, or external SST ingestion calls this function.)
4. BlockBasedTable::Open. (kPrefetch)
5. Index/Filter::CacheDependencies. (kPrefetch)
6. BlockBasedTable::ApproximateOffsetOf. (kCompaction or kUserApproximateSize).
I loaded 1 million key-value pairs into the database and ran the readrandom benchmark with a single thread. I gave the block cache 10 GB to make sure all reads hit the block cache after warmup. The throughput is comparable.
Throughput of this PR: 231334 ops/s.
Throughput of the master branch: 238428 ops/s.
Experiment setup:
RocksDB: version 6.2
Date: Mon Jun 10 10:42:51 2019
CPU: 24 * Intel Core Processor (Skylake)
CPUCache: 16384 KB
Keys: 20 bytes each
Values: 100 bytes each (100 bytes after compression)
Entries: 1000000
Prefix: 20 bytes
Keys per prefix: 0
RawSize: 114.4 MB (estimated)
FileSize: 114.4 MB (estimated)
Write rate: 0 bytes/second
Read rate: 0 ops/second
Compression: NoCompression
Compression sampling rate: 0
Memtablerep: skip_list
Perf Level: 1
Load command: ./db_bench --benchmarks="fillseq" --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000
Run command: ./db_bench --benchmarks="readrandom,stats" --use_existing_db --threads=1 --duration=120 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --statistics --cache_index_and_filter_blocks --cache_size=10737418240 --disable_auto_compactions=1 --disable_wal=1 --compression_type=none --min_level_to_compress=-1 --compression_ratio=1 --num=1000000 --duration=120
TODOs:
1. Create a caller for external SST file ingestion and differentiate the callers for iterator.
2. Integrate tracer to trace block cache accesses.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5421
Differential Revision: D15704258
Pulled By: HaoyuHuang
fbshipit-source-id: 4aa8a55f8cb1576ffb367bfa3186a91d8f06d93a
Summary:
In regular RocksDB instance, `MemTable::earliest_seqno_` is "db sequence number at the time of creation". However, we cannot use the db sequence number to set the value of `MemTable::earliest_seqno_` for secondary instance, i.e. `DBImplSecondary` due to the logic of MANIFEST and WAL replay.
When replaying the log files of the primary, the secondary instance first replays MANIFEST and updates the db sequence number if necessary. Next, the secondary replays WAL files, creates new memtables if necessary and inserts key-value pairs into memtables. The following can occur when the db has two or more column families.
Assume the db has column family "default" and "cf1". At a certain in time, both "default" and "cf1" have data in memtables.
1. Primary triggers a flush and flushes "cf1". "default" is **not** flushed.
2. Secondary replays the MANIFEST updates its db sequence number to the latest value learned from the MANIFEST.
3. Secondary starts to replay WAL that contains the writes to "default". It is possible that the write batches' sequence numbers are smaller than the db sequence number. In this case, these write batches will be skipped, and these updates will not be visible to reader until "default" is later flushed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5413
Differential Revision: D15637407
Pulled By: riversand963
fbshipit-source-id: 3de3fe35cfc6f1b9f844f3f926f0df29717b6580
Summary:
The patch reduces the contention over prepared_mutex_ using these techniques:
1) Move ::RemovePrepared() to be called from the commit callback when we have two write queues.
2) Use two separate mutex for PreparedHeap, one prepared_mutex_ needed for ::RemovePrepared, and one ::push_pop_mutex() needed for ::AddPrepared(). Given that we call ::AddPrepared only from the first write queue and ::RemovePrepared mostly from the 2nd, this will result into each the two write queues not competing with each other over a single mutex. ::RemovePrepared might occasionally need to acquire ::push_pop_mutex() if ::erase() ends up with calling ::pop()
3) Acquire ::push_pop_mutex() on the first callback of the write queue and release it on the last.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5420
Differential Revision: D15741985
Pulled By: maysamyabandeh
fbshipit-source-id: 84ce8016007e88bb6e10da5760ba1f0d26347735
Summary:
I'm not able to prove it, but the stress test failure may be caused by the following sequence of events -
1. Crash db_stress while writing the log file. This should result in a corrupted WAL.
2. Run db_stress with recycle_log_file_num=1. Crash during recovery immediately after writing manifest and updating the current file. The old log from the previous run is left behind, but the memtable would have been flushed during recovery and the CF log number will point to the newer log
3. Run db_stress with recycle_log_file_num=0. During recovery, the old log file will be processed and the corruption will be detected. Since the CF has moved ahead, we get the "SST file is ahead of WAL" error
Test -
1. stress_crash
2. make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5412
Differential Revision: D15699120
Pulled By: anand1976
fbshipit-source-id: 9092ce81e7c4a0b4b4e66560c23ea4812a4d9cbe
Summary:
PR #5111 reduced the number of key comparisons when iterating with
upper/lower bounds; however, this caused a regression for MyRocks.
Reverting to the previous behavior in BlockBasedTableIterator as a hotfix.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5428
Differential Revision: D15721038
Pulled By: ltamasi
fbshipit-source-id: 5450106442f1763bccd17f6cfd648697f2ae8b6c
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
It's useful to be able to (optionally) associate key-value pairs with user-provided timestamps. This PR is an early effort towards this goal and continues the work of facebook#4942. A suite of new unit tests exist in DBBasicTestWithTimestampWithParam. Support for timestamp requires the user to provide timestamp as a slice in `ReadOptions` and `WriteOptions`. All timestamps of the same database must share the same length, format, etc. The format of the timestamp is the same throughout the same database, and the user is responsible for providing a comparator function (Comparator) to order the <key, timestamp> tuples. Once created, the format and length of the timestamp cannot change (at least for now).
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
All tests must pass.
We also run the following db_bench tests to verify whether there is regression on Get/Put while timestamp is not enabled.
```
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000
```
Repeat for 6 times for both versions.
Results are as follows:
```
| | readrandom | fillrandom |
| master | 16.77 MB/s | 47.05 MB/s |
| PR5079 | 16.44 MB/s | 47.03 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5079
Differential Revision: D15132946
Pulled By: riversand963
fbshipit-source-id: 833a0d657eac21182f0f206c910a6438154c742c
Summary:
With this commit, RocksDB secondary instance respects atomic groups in version edits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5411
Differential Revision: D15617512
Pulled By: HaoyuHuang
fbshipit-source-id: 913f4ede391d772dcaf5649e3cd2099fa292d120
Summary:
Flush/compaction use `MergeUntil` which has a special code path to
handle a merge ending with a non-`Merge` point key. In particular if
that key is a `Put` we forgot to check whether it is covered by a range
tombstone. If it is covered then we must not include it in the following call
to `TimedFullMerge`.
Fixes#5392.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5406
Differential Revision: D15611144
Pulled By: sagar0
fbshipit-source-id: ba6a7863ca2d043f591de78fd0c4f4561f0c500e
Summary:
The PR #5275 separated the column dropped and shutdown status codes. However, there were a couple of places in compaction where this change ended up treating a ShutdownInProgress() error as a real error and set bg_error. This caused MyRocks unit test to fail due to WAL writes during shutdown returning this error. Fix it by ignoring the shutdown status during compaction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5400
Differential Revision: D15611680
Pulled By: anand1976
fbshipit-source-id: c602e97840e3ae24eb420d61e0ce95d3e6258632
Summary:
Currently we validate options in DB::Open. However the validation step is missing when options are dynamically updated in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5368
Differential Revision: D15540101
Pulled By: maysamyabandeh
fbshipit-source-id: d27bbffd8f0252d1b50bcf59e0a70a278ed937f4
Summary:
util/ means for lower level libraries. trace_replay is highly integrated to DB and sometimes call DB. Move it out to a separate directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5376
Differential Revision: D15550938
Pulled By: siying
fbshipit-source-id: f46dce5ceffdc05a73f26379c7bb1b79ebe6c207
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
In order to improve code readability, this PR moves LevelCompactionBuilder and LevelCompactionPicker to compaction_picker_level.h and .cc
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5369
Differential Revision: D15540172
Pulled By: miasantreble
fbshipit-source-id: c1a578b93f127cd63661b53f32b356e6edd349af
Summary:
The methods and fields in the private section of DBImpl were all intermingled, making it hard to figure out where the fields/methods start and where they end. I cleaned up the code a little so that all the type declaration are at the beginning, followed by methods, and all the data fields are at the end. This follows
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5385
Differential Revision: D15566978
Pulled By: sagar0
fbshipit-source-id: 4618a7d819ad4e2d7cc9ae1af2c59f400140bb1b
Summary:
1. Fix a bug in WAL replay in which write batches with old sequence numbers are mistakenly inserted into memtables.
2. Add support for benchmarking secondary instance to db_bench_tool.
With changes made in this PR, we can start benchmarking secondary instance
using two processes. It is also possible to vary the frequency at which the
secondary instance tries to catch up with the primary. The info log of the
secondary can be found in a directory whose path can be specified with
'-secondary_path'.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5170
Differential Revision: D15564608
Pulled By: riversand963
fbshipit-source-id: ce97688ed3d33f69d3a0b9266ebbbbf887aa0ec8
Summary:
Fix flaky DBTest2.PresetCompressionDict test.
This PR fixes two issues with the test:
1. Replaces `GetSstFiles` with `TotalSize`, which is based on `DB::GetColumnFamilyMetaData` so that only the size of the live SST files is taken into consideration when computing the total size of all sst files. Earlier, with `GetSstFiles`, even obsolete files were getting picked up.
1. In ZSTD compression, it is sometimes possible that using a trained dictionary is not better than using an untrained one. Using a trained dictionary performs well in 99% of the cases, but still in the remaining ~1% of the cases (out of 10000 runs) using an untrained dictionary gets better compression results.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5378
Differential Revision: D15559100
Pulled By: sagar0
fbshipit-source-id: c35adbf13871f520a2cec48f8bad9ff27ff7a0b4
Summary:
Currently, when the block cache is used for index blocks as well, it is
not really the index block that is stored in the cache but an
IndexReader object. Since this object is not pure data (it has, for
instance, pointers that might dangle), it's not really sharable. To
avoid the issues around this, the current code uses a dummy unique cache
key for each TableReader to store the IndexReader, and erases the
IndexReader entry when the TableReader is closed. Instead of doing this,
the new code moves the IndexReader out of the cache altogether. In
particular, instead of the TableReader owning, or caching/pinning the
IndexReader based on the customer's settings, the TableReader
unconditionally owns the IndexReader, which in turn owns/caches/pins
the index block (which is itself sharable and thus can be safely put in
the cache without any hacks).
Note: the change has two side effects:
1) Partitions of partitioned indexes no longer affect the read
amplification statistics.
2) Eviction statistics for index blocks are temporarily broken. We plan to fix
this in a separate phase.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5298
Differential Revision: D15303203
Pulled By: ltamasi
fbshipit-source-id: 935a69ba59d87d5e44f42e2310619b790c366e47
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
By increasing the ratio, we ensure that all files go through background deletion and eliminate flakiness due to timing of deletions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5366
Differential Revision: D15549992
Pulled By: anand1976
fbshipit-source-id: d137375cd791fc1a802841412755d6e2b8fd7688
Summary:
When dynamically setting options, we check the option type info and skip options that are marked deprecated. However this check is only done at top level, which results in bugs where SetOptions will corrupt option values and cause unexpected system behavior iff a deprecated second level option is set dynamically.
For exmaple, the following call:
```
dbfull()->SetOptions(
{{"compaction_options_fifo",
"{allow_compaction=true;max_table_files_size=1024;ttl=731;}"}});
```
was from pre 6.0 release when `ttl` was part of `compaction_options_fifo`. Now that it got moved out of `compaction_options_fifo`, this call will incorrectly set `compaction_options_fifo.max_table_files_size` to 731 (as `max_table_files_size` is the first one in `OptionsHelper::fifo_compaction_options_type_info` struct) and cause files to gett evicted much faster than expected.
This PR adds verification to second level options like `compaction_options_fifo.ttl` or `compaction_options_fifo.max_table_files_size` when set dynamically, and filter out those marked as deprecated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5367
Differential Revision: D15530998
Pulled By: miasantreble
fbshipit-source-id: 818258be5c3abe09cd82d62f3c083572d70fecdd
Summary:
util/ means for lower level libraries, so it's a good idea to move the files which requires knowledge to DB out. Create a file/ and move some files there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5375
Differential Revision: D15550935
Pulled By: siying
fbshipit-source-id: 61a9715dcde5386eebfb43e93f847bba1ae0d3f2
Summary:
Add some comments in db_impl.h. Also reordered function order a little bit so that I can add a comment to flag the area of functions implementing DB interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5338
Differential Revision: D15498284
Pulled By: siying
fbshipit-source-id: 3d7c59c8303577fe44d13c74ae84c7ce05164f77
