Summary:
This is an initial version of bulk load feature
This diff allow us to create sst files, and then bulk load them later, right now the restrictions for loading an sst file are
(1) Memtables are empty
(2) Added sst files have sequence number = 0, and existing values in database have sequence number = 0
(3) Added sst files values are not overlapping
Test Plan: unit testing
Reviewers: igor, ott, sdong
Reviewed By: sdong
Subscribers: leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D39081
Summary:
PlainTableReader now only allows mmap-mode. Add the support to non-mmap mode for more flexibility.
Refactor the codes to move all logic of reading data to PlainTableKeyDecoder, and consolidate the calls to Read() call and ReadVarint32() call. Implement the calls for both of mmap and non-mmap case seperately. For non-mmap mode, make copy of keys in several places when we need to move the buffer after reading the keys.
Test Plan: Add the mode of non-mmap case in plain_table_db_test. Run it in valgrind mode too.
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D47187
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary: There was a merge issue with SleepingBackgroundTask
Test Plan: compiles now
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46977
Summary:
This patch finally fixes the ColumnFamilyTest.ReadDroppedColumnFamily test. The test has been failing very sporadically and it was hard to repro. However, I managed to write a new tests that reproes the failure deterministically.
Here's what happens:
1. We start the flush for the column family
2. We check if the column family was dropped here: a3fc49bfdd/db/flush_job.cc (L149)
3. This check goes through, ends up in InstallMemtableFlushResults() and it goes into LogAndApply()
4. At about this time, we start dropping the column family. Dropping the column family process gets to LogAndApply() at about the same time as LogAndApply() from flush process
5. Drop column family goes through LogAndApply() first, marking the column family as dropped.
6. Flush process gets woken up and gets a chance to write to the MANIFEST. However, this is where it gets stuck: a3fc49bfdd/db/version_set.cc (L1975)
7. We see that the column family was dropped, so there is no need to write to the MANIFEST. We return OK.
8. Flush gets OK back from LogAndApply() and it deletes the memtable, thinking that the data is now safely persisted to sst file.
The fix is pretty simple. Instead of OK, we return ShutdownInProgress. This is not really true, but we have been using this status code to also mean "this operation was canceled because the column family has been dropped".
The fix is only one LOC. All other code is related to tests. I added a new test that reproes the failure. I also moved SleepingBackgroundTask to util/testutil.h (because I needed it in column_family_test for my new test). There's plenty of other places where we reimplement SleepingBackgroundTask, but I'll address that in a separate commit.
Test Plan:
1. new test
2. make check
3. Make sure the ColumnFamilyTest.ReadDroppedColumnFamily doesn't fail on Travis: https://travis-ci.org/facebook/rocksdb/jobs/79952386
Reviewers: yhchiang, anthony, IslamAbdelRahman, kradhakrishnan, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46773
Summary:
There are some use cases in MyRocks to compare two slices
and to return the first byte where they differ. It may be
useful to add it as a RocksDB Slice function.
Test Plan: db_test
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D46935
Summary: Add an option to stop writes if compaction lefts behind. If estimated pending compaction bytes is more than threshold specified by options.hard_pending_compaction_bytes_liimt, writes will stop until compactions are cleared to under the threshold.
Test Plan: Add unit test DBTest.HardLimit
Reviewers: rven, kradhakrishnan, anthony, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45999
Summary:
Up to this point, the subcompactions that make up a compaction
job have been divided based on the key range of the L1 files, and each
subcompaction has handled the key range of only one file. However
DBOption.max_subcompactions allows the user to designate how many
subcompactions at most to perform. This patch updates the
CompactionJob::GetSubcompactionBoundaries() to determine these
divisions accordingly based on that option and other input/system factors.
The current approach orders the starting and/or ending keys of certain
compaction input files and then generates a histogram to approximate the
size covered by the key range between each consecutive pair of keys. Then
it groups these ranges into groups so that the sizes are approximately equal
to one another. The approach has also been adapted to work for universal
compaction as well instead of just for level-based compaction as it was before.
These subcompactions are then executed in parallel by locally spawning
threads, one for each. The results are then aggregated and the compaction
completed.
Test Plan: make all && make check
Reviewers: yhchiang, anthony, igor, noetzli, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43269
Summary: DBTest.ReadLatencyHistogramByLevel was not written as expected. After writes, reads aren't guaranteed to hit data written. It was not expected. Fix it.
Test Plan: Run the test multiple times
Reviewers: IslamAbdelRahman, rven, anthony, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46587
Summary: Currently, if users didn't set options.arena_block_size, we set "result.arena_block_size = result.write_buffer_size / 10". It makes result.arena_block_size not a multiplier of 4KB, even if options.write_buffer_size is a multiplier of MBs. When calling malloc to arena_block_size, we may waste a small amount of memory for it. We now make the default to be /8 or /16 and align it to 4KB.
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46467
Summary:
This commit makes DBTest.OptimizeFiltersForHits more deterministic by:
(1) make key inserts more random
(2) make sure L0 has one file
(3) make file size smaller compared to level target so L1 will cover more range.
Test Plan: Run the test many times.
Reviewers: rven, IslamAbdelRahman, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46461
Summary:
This diff is a collection of cleanups that were initially part of D43179.
Additionally it adds a unified way of defining key-value maps that use a
Comparator for sorting (this was previously implemented in four different
places).
Test Plan: make clean check all
Reviewers: rven, anthony, yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45993
Summary: TableCache::Get() puts parameters in the wrong places so that table readers created by Get() will not have the histogram updated.
Test Plan: Will write a unit test for that.
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46035
Summary:
Now that the approach to parallelizing L0-L1 level-based
compactions by breaking the compaction job into subcompactions is
being extended to apply to universal compactions as well, the unit
tests need to account for this and run the universal compaction
tests with subcompactions both enabled and disabled.
Test Plan: make all && make check
Reviewers: sdong, igor, noetzli, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45657
Summary: malloc_usable_size() gets a better estimation of memory usage. It is already used to calculate block cache memory usage. Use it in arena too.
Test Plan: Run all unit tests
Reviewers: anthony, kradhakrishnan, rven, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43317
Summary:
MarkLogsSynced() was doing `logs_.erase(it++);`. The standard is saying:
```
all iterators and references are invalidated, unless the erased members are at an end (front or back) of the deque (in which case only iterators and references to the erased members are invalidated)
```
Because `it` is an iterator to the first element of the container, it is
invalidated, only one iteration is executed and `log.getting_synced = false;`
is not being done, so `while (logs_.front().getting_synced)` in `WriteImpl()`
is not terminating.
Test Plan: make db_bench && ./db_bench --benchmarks=fillsync
Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, yhchiang, sdong, tnovak
Reviewed By: tnovak
Subscribers: kolmike, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45807
Summary:
Just realized that after D45675, part of the code in
DBTest.ApproximateMemoryUsage, does not really test anything anymore, so I
removed it.
Test Plan: make clean all check
Reviewers: rven, igor, sdong, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45783
Summary:
This patch fixes two issues in DBTest.ApproximateMemoryUsage:
- It was possible that a flush happened between getting the two properties in
Phase 1, resulting in different numbers for the properties and failing the
assertion. This is fixed by waiting for the flush to finish before getting
the properties.
- There was a similar issue in Phase 2 and additionally there was an issue that
rocksdb.size-all-mem-tables was not monotonically increasing because it was
possible that a flush happened just after getting the properties and then
another flush just before getting the properties in the next round. In this
situation, the reported memory usage decreased. This is fixed by forcing a
flush before getting the properties.
Note: during testing, I found that kFlushesPerRound does not seem very
accurate. I added a TODO for this and it would be great to get some input on
what to do there.
Test Plan:
The first issue can be made more likely to trigger by inserting a
`usleep(10000);` between the calls to GetIntProperty() in Phase 1.
The second issue can be made more likely to trigger by inserting a
`if (r != 0) usleep(10000);` before the calls to GetIntProperty() and a
`usleep(10000);` after the calls.
Then execute make db_test && ./db_test --gtest_filter=DBTest.ApproximateMemoryUsage
Reviewers: rven, yhchiang, igor, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45675
Summary:
DBTest.GetProperty was failing occasionally (see task #8131266). The reason was
that the test closed the database before the compaction was done. When the test
reopened the database, RocksDB would schedule a compaction which in turn
created table readers and lead the test to fail the assertion that
rocksdb.estimate-table-readers-mem is 0. In most cases, GetIntProperty() of
rocksdb.estimate-table-readers-mem happened before the compaction created the
table readers, hiding the problem. This patch changes the
WaitForFlushMemTable() to WaitForCompact(). WaitForFlushMemTable() is not
necessary because it is already being called a couple of lines before without
any insertions in-between.
Test Plan:
Insert `usleep(10000);` just after `Reopen(options);` on line 2333 to make the issue more likely, then run:
make db_test && while ./db_test --gtest_filter=DBTest.GetProperty; do true; done
Reviewers: rven, yhchiang, anthony, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45603
Summary:
This patch adds "rocksdb.aggregated-table-properties"
and "rocksdb.aggregated-table-properties-at-levelN", the former
returns the aggreated table properties of a column family,
while the later returns the aggregated table properties
of the specified level N.
Test Plan: Added tests in db_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45087
Summary:
This patch fixes a race condition in DBTEst.DynamicMemtableOptions. In rare cases,
it was possible that the main thread would fill up both memtables before the flush
job acquired its work. Then, the flush job was flushing both memtables together,
producing only one L0 file while the test expected two. Now, the test waits for
flushes to finish earlier, to make sure that the memtables are flushed in separate
flush jobs.
Test Plan:
Insert "usleep(10000);" after "IOSTATS_SET_THREAD_POOL_ID(Env::Priority::HIGH);" in BGWorkFlush()
to make the issue more likely. Then test with:
make db_test && time while ./db_test --gtest_filter=*DynamicMemtableOptions; do true; done
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45429
Summary: As title
Test Plan: make check
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45447
Summary:
Currently, we only purge duplicate keys and deletions during flush if `earliest_seqno_in_memtable <= newest_snapshot`. This means that the newest snapshot happened before we first created the memtable. This is almost never true for MyRocks and MongoRocks.
This patch makes purging during flush able to understand snapshots. The main logic is copied from compaction_job.cc, although the logic over there is much more complicated and extensive. However, we should try to merge the common functionality at some point.
I need this patch to implement no_overwrite_i_promise functionality for flush. We'll also need this to support SingleDelete() during Flush(). @yoshinorim requested the feature.
Test Plan:
make check
I had to adjust some unit tests to understand this new behavior
Reviewers: yhchiang, yoshinorim, anthony, sdong, noetzli
Reviewed By: noetzli
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42087
Summary:
Up until this point we had DbOptions.num_subcompactions, but
it is semantically more correct to call this max_subcompactions since
we will schedule *up to* DbOptions.max_subcompactions smaller compactions
at a time during a compaction job.
I also added a --subcompactions option to db_bench
Test Plan: make all make check
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45069
Summary:
Add a counter of estimated bytes the DB needs to compact for all the compactions to finish. Expose it as a DB Property.
In the future, we can use threshold of this counter to replace soft rate limit and hard rate limit. A single threshold of estimated compaction debt in bytes will be easier for users to reason about when should slow down and stopping than more abstract soft and hard rate limits.
Test Plan: Add unit tests
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44205
Summary:
Currently, ThreadStatusFlush uses two sync-points to ensure
there's a flush currently running when calling GetThreadList().
However, one of the sync-point is inside db-mutex, which could
cause deadlock in case there's a DB::Get() call.
This patch fix this issue by moving the sync-point to a better
place where the flush job does not hold the mutex.
Test Plan: db_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45045
Summary: Add a new DB property that calculate the total size of files used by all RocksDB Versions
Test Plan: Unittests for the new property
Reviewers: igor, yhchiang, anthony, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44799
Summary: Update DestroyDB so that all SST files in the first path id go through DeleteScheduler instead of being deleted immediately
Test Plan: added a unittest
Reviewers: igor, yhchiang, anthony, kradhakrishnan, rven, sdong
Reviewed By: sdong
Subscribers: jeanxu2012, dhruba
Differential Revision: https://reviews.facebook.net/D44955
Summary:
Currently, GetIntProperty("rocksdb.cur-size-all-mem-tables") only returns
the memory usage by those memtables which have not yet been flushed.
This patch introduces GetIntProperty("rocksdb.size-all-mem-tables"),
which includes the memory usage by all the memtables, includes those
have been flushed but pinned by iterators.
Test Plan: Added a test in db_test
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D44229
Summary: There is a check to fail the iterator if prefix extractor is specified but upper bound is out of the prefix for the seek key. Relax this constraint to allow users to set upper bound to the next prefix of the current one.
Test Plan: make commit-prereq
Reviewers: igor, anthony, kradhakrishnan, yhchiang, rven
Reviewed By: rven
Subscribers: tnovak, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44949
Summary: Add a new option that all LoadTableHandlers to use multiple threads to load files on DB Open and Recover
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
DISABLE_JEMALLOC=1 make all valgrind_check -j64 (still running)
Reviewers: yhchiang, anthony, rven, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43755
Summary:
While working on single delete support for db_bench, I realized that
db_bench/db_stress contain a bunch of duplicate code related to
copmression and found some typos. This patch removes duplicate code,
typos and a redundant #ifndef in internal_stats.cc.
Test Plan: make db_stress && make db_bench && ./db_bench --benchmarks=compress,uncompress
Reviewers: yhchiang, sdong, rven, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43965
Summary: Implemented this simple wrapper for something else I was working on. Seemed like it makes sense to expose it instead of burying it in some random code.
Test Plan: added test
Reviewers: rven, kradhakrishnan, sdong, yhchiang
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43293
Summary: Update DeleteScheduler tests so that they verify the used penalties for waiting instead of measuring the time spent which is not reliable
Test Plan:
make -j64 delete_scheduler_test && ./delete_scheduler_test
COMPILE_WITH_TSAN=1 make -j64 delete_scheduler_test && ./delete_scheduler_test
COMPILE_WITH_ASAN=1 make -j64 delete_scheduler_test && ./delete_scheduler_test
make -j64 db_test && ./db_test --gtest_filter="DBTest.RateLimitedDelete:DBTest.DeleteSchedulerMultipleDBPaths"
COMPILE_WITH_TSAN=1 make -j64 db_test && ./db_test --gtest_filter="DBTest.RateLimitedDelete:DBTest.DeleteSchedulerMultipleDBPaths"
COMPILE_WITH_ASAN=1 make -j64 db_test && ./db_test --gtest_filter="DBTest.RateLimitedDelete:DBTest.DeleteSchedulerMultipleDBPaths"
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43635
Summary: The list of info log files of a db can be obtained using the new function.
Test Plan: New test in db_test.cc passed.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: IslamAbdelRahman, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41715
Summary:
Add two unit tests for SyncWAL(). One makes sure SyncWAL() doesn't block writes in the other thread. Another one makes sure SyncWAL() doesn't wait ongoing writes to finish before being executed.
Create a new test file db_wal_test and move two WAL related tests from db_test to here.
Test Plan: Run the new tests
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, kolmike, tnovak, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43605
Summary: This patch will fix the false positive of DBTest.FlushSchedule under TSAN, we dont need to disable this test
Test Plan: COMPILE_WITH_TSAN=1 make -j64 db_test && ./db_test --gtest_filter="DBTest.FlushSchedule"
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43599
Summary:
While doing forward iterating, if current key is merge, internal iterator position is placed to the next key. If Prev() is called now, needs to do extra Prev() to recover the location.
This is second attempt of fixing after reverting ec70fea4c4. This time shrink the fix to only merge key is the current key and avoid the reseeking logic for max_iterating skipping
Test Plan: enable the two disabled tests and make sure they pass
Reviewers: rven, IslamAbdelRahman, kradhakrishnan, tnovak, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43557
Summary:
Subj. We really need this feature.
Previous diff D40899 has most of the changes to make this possible, this diff just adds the method.
Test Plan: `make check`, the new test fails without this diff; ran with ASAN, TSAN and valgrind.
Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, tnovak, yhchiang, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, maykov, hermanlee4, yoshinorim, tnovak, dhruba
Differential Revision: https://reviews.facebook.net/D40905
Summary:
Updated DBTest DBCompactionTest and CompactionJobStatsTest
to run compaction-related tests once with subcompactions enabled and
once disabled using the TEST_P test type in the Google Test suite.
Test Plan: ./db_test ./db_compaction-test ./compaction_job_stats_test
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43443
Summary:
Introduce DeleteScheduler that allow enforcing a rate limit on file deletion
Instead of deleting files immediately, files are moved to trash directory and deleted in a background thread that apply sleep penalty between deletes if needed.
I have updated PurgeObsoleteFiles and PurgeObsoleteWALFiles to use the delete_scheduler instead of env_->DeleteFile
Test Plan:
added delete_scheduler_test
existing unit tests
Reviewers: kradhakrishnan, anthony, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43221
Summary: These tests used to fail if a compaction happened between flushing tables and enumerating them to get properties.
Test Plan: this reports occasional failures without this diff and no failures with it: `for i in {1..10000}; do echo $i; done | parallel --gnu -j100 'TEST_TMPDIR=`TMPDIR=/dev/shm/rockstemp mktemp -d -t` ./db_test --gtest_filter=DBTest.GetUserDefinedTablaProperties >&/dev/null || echo {} failed'`
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42861
Summary:
Fixes T6548822. Added a new function for estimating the size of the live data
as proposed in the task. The value can be accessed through the property
rocksdb.estimate-live-data-size.
Test Plan:
There are two unit tests in version_set_test and a simple test in db_test.
make version_set_test && ./version_set_test;
make db_test && ./db_test gtest_filter=GetProperty
Reviewers: rven, igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41493
Summary: DBTest.GetPropertiesOfAllTablesTest generates four files and expects four files there, but a L0->L1 comapction can trigger to compact to one single file. Fix it by raising level 0 number of file compaction trigger
Test Plan: Run it many times and see it never fails.
Reviewers: kradhakrishnan, IslamAbdelRahman, yhchiang, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42789
Summary: Move general compaction tests from db_test.cc to db_compaction_test.cc
Test Plan:
db_test
db_compaction_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42651
Summary: Add new CheckFileExists method. Considered changing the FileExists api but didn't want to break anyone's builds.
Test Plan: unit tests
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42003
