Summary:
Previously, if you opened a db with num_levels set lower than
the database, you received the unhelpful message "Corruption:
VersionEdit: new-file entry." Now you get a more verbose message
describing the issue.
Also, fix handling of compression_levels (both the run-over-the-end
issue and the memory management of it).
Lastly, unique_ptr'ify a couple of minor calls.
Test Plan: make check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8151
Summary:
We continually rebuilt build_version.c because we put the
current date into it, but that's what __DATE__ already is. This makes
builds faster.
This also fixes an issue with 'make clean FOO' not working properly.
Also tweak the build rules to be more consistent, always have warnings,
and add a 'make release' rule to handle flags for release builds.
Test Plan: make, make clean
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D8139
Summary:
On some filesystems, pre-allocation can be a considerable
amount of space. xfs in our production environment pre-allocates by
1GB, for instance. By using fallocate to inform the kernel of our
expected file sizes, we eliminate this wasteage (that isn't recovered
until the file is closed which, in the case of LOG files, can be a
considerable amount of time).
Test Plan:
created an xfs loopback filesystem, mounted with
allocsize=4M, and ran db_stress. LOG file without this change was 4M,
and with it it was 128k then grew to normal size.
Reviewers: dhruba
Reviewed By: dhruba
CC: adsharma, leveldb
Differential Revision: https://reviews.facebook.net/D7953
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
Summary:
In `Table::BlockReader()` when there was no block cache `didIO` was not set.
This didn't seem to matter as `didIO` is only used to trigger seek compactions. However, I would like it if someone else could check that is the case.
Test Plan: `make check OPT="-g -O3"`
Reviewers: dhruba, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8133
Summary:
Found issues with `db_test` and `db_stress` when running valgrind.
`DBImpl` had an issue where if an compaction failed then it will use the uninitialised file size of an output file is used. This manifested as the final call to output to the log in `DoCompactionWork()` branching on uninitialized memory (all the way down in printf's innards).
Test Plan:
Ran `valgrind --track_origins=yes ./db_test` and `valgrind ./db_stress` to see if issues disappeared.
Ran `make check` to see if there were no regressions.
Reviewers: vamsi, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8001
Summary:
Several fixes:
1) Use mktemp to create the files and directories
2) Take the stat file as an argument so that the buildservers
can specify a file in the WORKSPACE and not in /tmp
3) Use nproc to set make -j value.
4) Check for valid values before sending to ODS
5) Cleanup the grep/cut pipeline to just use awk
Test Plan: Verify tests run and complete
Reviewers: sheki, dhruba
Reviewed By: sheki
Differential Revision: https://reviews.facebook.net/D7995
Summary: a function added to status.h to check whether Status::code is InvalidArgument and similarly for NotSupported state
Test Plan: visual inspection
Reviewers: heyongqiang, dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7989
Summary:
Check in LogAndApply if the file size is more than the limit set in
Options.
Things to consider : will this be expensive?
Test Plan: make all check. Inputs on a new unit test?
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7701
Summary:
clang is an alternate compiler based on llvm. It produces
nicer error messages and finds some bugs that gcc doesn't, such as the
size_t change in this file (which caused some write return values to be
misinterpreted!)
Clang isn't the default; to try it, do "USE_CLANG=1 make" or "export
USE_CLANG=1" then make as normal
Test Plan: "make check" and "USE_CLANG=1 make check"
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7899
Summary: Mis-merged from HEAD, had a duplicate declaration.
Test Plan: make -j32 OPT=-g
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7911
Summary: Due to how the code handled compactions in Level 0 in `PickCompaction()` it could be the case that two compactions on level 0 ran that produced tables in level 1 that overlap. However, this case seems like it would only occur on a seek compaction which is unlikely on level 0. Furthermore, level 0 and level 1 had to have a certain arrangement of files.
Test Plan:
make check
Reviewers: dhruba, vamsi
Reviewed By: dhruba
CC: leveldb, sheki
Differential Revision: https://reviews.facebook.net/D7923
Summary:
Basic Regression test.
Plan to run this every-night and record qps in ods.
Test Plan: ran locally and checked
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7929
Summary:
Specific changes:
1) Turn on -Werror so all warnings are errors
2) Fix some warnings the above now complains about
3) Add proper dependency support so changing a .h file forces a .c file
to rebuild
4) Automatically use fbcode gcc on any internal machine rather than
whatever system compiler is laying around
5) Fix jemalloc to once again be used in the builds (seemed like it
wasn't being?)
6) Fix issue where 'git' would fail in build_detect_version because of
LD_LIBRARY_PATH being set in the third-party build system
Test Plan:
make, make check, make clean, touch a header file, make sure
rebuild is expected
Reviewers: dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7887
Summary:
Pretty much a blind copy of the patch in open source.
Hope to get this in before we make a release
Test Plan: make clean check
Reviewers: dhruba, heyongqiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7809
Summary:
`Table::Open()` assumes that `size` correctly describes the size of `file`, added a check that the footer is actually the right size and for good measure added assertions to `Footer::DecodeFrom()`.
This was discovered by running `valgrind ./db_test` and seeing that `Footer::DecodeFrom()` was accessing uninitialized memory.
Test Plan:
make clean check
ran `valgrind ./db_test` and saw DBTest.NoSpace no longer complains about a conditional jump being dependent on uninitialized memory.
Reviewers: dhruba, vamsi, emayanke, sheki
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7815
Summary:
The asserts introduced in https://reviews.facebook.net/D7629 are
wrong.
The direction of iteration is changed after the function call so they
assert's fail.
Test Plan: make clean check
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7827
Summary: Found some issues running Valgrind on `db_test` (there are still some outstanding ones) and fixed them.
Test Plan:
make check
ran `valgrind ./db_test` and saw that errors no longer occur
Reviewers: dhruba, vamsi, emayanke, sheki
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7803
Summary: `~ShardedLRUCache()` was empty despite `init()` allocating memory on the heap. Fixed the leak by freeing memory allocated by `init()`.
Test Plan:
make check
Ran valgrind on db_test before and after patch and saw leaked memory went down
Reviewers: vamsi, dhruba, emayanke, sheki
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7791
Summary:
This was a peformance regression caused by https://reviews.facebook.net/D6729.
The default value of max_grandparent_overlap_factor was erroneously
set to 0 in db_bench.
This was causing compactions to create really really small files because the max_grandparent_overlap_factor was erroneously set to zero in the benchmark.
Test Plan: Run --benchmarks=overwrite
Reviewers: heyongqiang, emayanke, sheki, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7797
Summary:
Changed CreateDir() to CreateDirIfMissing() so a directory that already exists now causes and error.
Fixed CreateDirIfMissing() and added Env.DirExists()
Test Plan:
make check to test for regessions
Ran the following to test if the error message is not about lock files not existing
./db_bench --db=dir/testdb
After creating a file "testdb", ran the following to see if it failed with sane error message:
./db_bench --db=testdb
Reviewers: dhruba, emayanke, vamsi, sheki
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7707
Summary:
Adds the option --seed to db_bench to specify the base for the per-thread RNG.
When not set each thread uses the same value across runs of db_bench which defeats
IO stress testing.
Adds the option --read_range. When set to a value > 1 an iterator is created and
each query done for the randomread benchmark will do a range scan for that many
rows. When not set or set to 1 the existing behavior (a point lookup) is done.
Fixes a bug where a printf format string was missing.
Test Plan: run db_bench
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7749
Summary:
`MemTableList::Add()` neglected to mention that it took ownership of the reference held by its caller.
The comment in `MemTable::Get()` was wrong in describing the format of the key.
Test Plan: None
Reviewers: dhruba, sheki, emayanke, vamsi
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7755
Summary:
Use a std::priority_queue in merger.cc instead of doing a o(n) search
every time.
Currently only the ForwardIteration uses a Priority Queue.
Test Plan: make all check
Reviewers: dhruba
Reviewed By: dhruba
CC: emayanke, zshao
Differential Revision: https://reviews.facebook.net/D7629
Summary:
There was a bug in the ExtendOverlappingInputs method so that
the terminating condition for the backward search was incorrect.
Test Plan: make clean check
Reviewers: sheki, emayanke, MarkCallaghan
Reviewed By: MarkCallaghan
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7725
Summary:
1. The thrift libraries do not need to be built anyore.
2. SSE is dynamically detected via
1aae609b92
Test Plan: compile and build
Reviewers: sheki, emayanke
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7665
Summary:
There is a compilation error while using gcc 4.7.1.
util/ldb_cmd.cc:381:3: error: ‘leveldb::ReadOptions::ReadOptions’ names the constructor, not the type
util/ldb_cmd.cc:381:37: error: expected ‘;’ before ‘read_options’
util/ldb_cmd.cc:381:49: error: statement cannot resolve address of overloaded function
Test Plan: make clean check
Reviewers: sheki, emayanke, zshao
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7659
Summary: The queries will come from stdin. One key per line. The output will be in stdout, in the format of "<key> ==> <value>" if found, or "<key>" if not found. "--hex" uses HEX-encoded keys and values in both input and output.
Test Plan: ldb query --db=leveldb_db --hex
Reviewers: dhruba, emayanke, sheki
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7617
Summary: We were ignoring additional chars at the end of an arg. This can create confusion, e.g. --disable_wal=0 will act the same as --disable_wal without any warnings.
Test Plan:
Tried this:
[zshao@dev485 ~/git/rocksdb] ./ldb dump --statsAAA
Failed: Unknown argument:--statsAAA
Reviewers: dhruba, sheki, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7635
Summary: The current parsing logic ignores any additional chars after the arg.
Test Plan: "./sst_dump --verify_checksumAAA" now outputs error.
Reviewers: dhruba, sheki, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7611
Summary:
Create an Executable with
* A thread to do Put's
* A thread to use GetUpdatesSince. Check if we miss any sequence
Numbers.
Test Plan: It runs.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7383
Summary: Now sst_dump has the same option --output_hex as "ldb dump" and also share the same output format. So we can do "sst_dump ... | ldb load ..." for an experiment.
Test Plan:
[zshao@dev485 ~/git/rocksdb] ./sst_dump --file=/data/users/zshao/test_leveldb/000005.sst --output_hex | head -n 2
0000027F4FBE00000101000000000000 ==> D901000000000000000057596F7520726563656976656420746F6461792773207370656369616C20676966742120436C69636B2041636365707420746F207669657720796F75722047696674206265666F72652069742064697361707065617273210000000000000000
000007F9C2D400000102000000000000 ==> 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
Reviewers: dhruba, sheki, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7587
Summary:
This allows ldb to control the write_buffer_size (which reflects to L0 file size) and file_size (which reflects to L1 file size). Since the target_file_size_ratio is 1 by default, all other levels will also have the same file size as L1.
As part of the diff, I also cleaned up some unused code and help messages.
Test Plan: ./ldb load --db=/data/users/zshao/test_leveldb --file_size=64000000 --write_buffer_size=32000000 --create_if_missing --input_hex --disable_wal
Reviewers: dhruba, sheki, emayanke
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7569
Summary: It took me almost a day to debug this. :( Although I got to learn the file format as a by-product, this time could be saved if we have better error messages.
Test Plan: gmake clean all; sst_dump --hex --file=000005.sst
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7551
Summary: This is a standalone unit test to test the format of a block.
Test Plan: ./block_test
Reviewers: sheki
Reviewed By: sheki
Differential Revision: https://reviews.facebook.net/D7533
Summary:
Without this fix, I see failures like this:
[zshao@dev1049 /data/users/zshao/rocksdb] . fbcode.gcc471.sh; gmake clean libleveldb.a
. . .
./thrift/lib/cpp/async/TEventUtil.h:22:32: fatal error: event.h: No such file or directory
Test Plan: . fbcode.gcc471.sh; make clean libleveldb.a
Reviewers: dhruba, emayanke, sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7497
Summary:
Leveldb has an api OpenForReadOnly() that opens the database
in readonly mode. This call had an option to not process the
transaction log. This patch removes this option and always
processes all transactions that had been committed. It has
been done in such a way that it does not create/write to
any new files in the process. The invariant of "no-writes"
to the leveldb data directory is still true.
This enhancement allows multiple threads to open the same database
in readonly mode and access all trancations that were committed right
upto the OpenForReadOnly call.
I changed the public API to match the new semantics because
there are no users who are currently using this api.
Test Plan: make clean check
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7479
Summary: This command accepts key-value pairs from stdin with the same format of "ldb dump" command. This allows us to try out different compression algorithms/block sizes easily.
Test Plan: dump, load, dump, verify the data is the same.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7443
Summary:
1. The OpenForReadOnly() call should not lock the db. This is useful
so that multiple processes can open the same database concurrently
for reading.
2. GetUpdatesSince should not error out if the archive directory
does not exist.
3. A new constructor for WriteBatch that can takes a serialized
string as a parameter of the constructor.
Test Plan: make clean check
Reviewers: sheki
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D7449
Summary:
Added kMetaDatabase for meta-databases in db/filename.h along with supporting
fuctions.
Fixed switch in DBImpl so that it also handles kMetaDatabase.
Fixed DestroyDB() that it can handle destroying meta-databases.
Test Plan: make check
Reviewers: sheki, emayanke, vamsi, dhruba
Reviewed By: dhruba
Differential Revision: https://reviews.facebook.net/D7245
