Summary:
Atomic white box test's kill odd is the same as normal test. However, in the scenario that only WritableFileWriter::Append() is blacklisted, WritableFileWriter::Flush() dominates the killing odds. Normally, most of WritableFileWriter::Flush() are called in WAL writes, where every write triggers a WAL flush. In atomic test, WAL is disabled, so the kill happens less frequently than we antipated. In some rare cases, the kill didn't end up with happening (for reasons I still don't fully understand) and cause the stress test timeout.
If WAL is disabled, make the odds 5x likely to trigger.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5717
Test Plan: Run whitebox_crash_test_with_atomic_flush and whitebox_crash_test and observe the kill odds printed out.
Differential Revision: D16897237
fbshipit-source-id: cbf5d96f6fc0e980523d0f1f94bf4e72cdb82d1c
Summary:
Atomic flush test started to fail after https://github.com/facebook/rocksdb/issues/5099. Then https://github.com/facebook/rocksdb/issues/5278 provided a fix after
which the same error occurred much less frequently. However it still occur
occasionally. Not sure what the root cause is. This PR disables the feature of
snapshot list refresh, and we should keep an eye on the failure in the future.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5581
Differential Revision: D16295985
Pulled By: riversand963
fbshipit-source-id: c9e62e65133c52c21b07097de359632ca62571e4
Summary:
The tsan crash tests are failing with a data race compliant with pipelined write option. Temporarily disable it until its concurrency issue are fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5445
Differential Revision: D15783824
Pulled By: maysamyabandeh
fbshipit-source-id: 413a0c3230b86f524fc7eeea2cf8e8375406e65b
Summary:
This PR fixes a couple of bugs in FilePickerMultiGet that were causing db_stress test failures. The failures were caused by -
1. Improper handling of a key that matches the user key portion of an L0 file's largest key. In this case, the curr_index_in_curr_level file index in L0 for that key was getting incremented, but batch_iter_ was not advanced. By design, all keys in a batch are supposed to be checked against an L0 file before advancing to the next L0 file. Not advancing to the next key in the batch was causing a double increment of curr_index_in_curr_level due to the same key being processed again
2. Improper handling of a key that matches the user key portion of the largest key in the last file of L1 and higher. This was resulting in a premature end to the processing of the batch for that level when the next key in the batch is a duplicate. Typically, the keys in MultiGet will not be duplicates, but its good to handle that case correctly
Test -
asan_crash
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5292
Differential Revision: D15282530
Pulled By: anand1976
fbshipit-source-id: d1a6a86e0af273169c3632db22a44d79c66a581f
Summary:
Disable it for now until we can get stress tests to pass consistently.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5284
Differential Revision: D15230727
Pulled By: anand1976
fbshipit-source-id: 239baacdb3c4cd4fb7c4447f7582b9042501d752
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
For simplicity, to avoid the feature is disabled in two cases: i) When more than one sub-compaction are sharing the same snapshot list, ii) when Range Delete is used in which the range delete aggregator has its own copy of snapshot list.
This fixes the reverted https://github.com/facebook/rocksdb/pull/5099 issue with range deletes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5278
Differential Revision: D15203291
Pulled By: maysamyabandeh
fbshipit-source-id: fa645611e606aa222c7ce53176dc5bb6f259c258
Summary:
The new option will pick a batch size randomly in the range 1-64. It will then space the keys in the batch by random intervals.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5264
Differential Revision: D15175522
Pulled By: anand1976
fbshipit-source-id: c16baa69d0f1ff4cf53c55c813ddd82c8aeb58fc
Summary:
At least one of the meta-block loading functions (`ReadRangeDelBlock`)
uses the same block reading function (`NewDataBlockIterator`) as data
block reads, which means it uses the dictionary handle. However, the
dictionary handle was uninitialized while reading meta-blocks, causing
readers to receive an error. This situation was only noticed when
`cache_index_and_filter_blocks=true`.
This PR initializes the handle to null while reading meta-blocks to
prevent the error. It also adds support to `db_stress` /
`db_crashtest.py` for `cache_index_and_filter_blocks`.
Fixes#5263.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5267
Differential Revision: D15149264
Pulled By: maysamyabandeh
fbshipit-source-id: 991d38a306c62db5976778bfb050fa3cd4a0671b
Summary:
Since currently pipelined write allows one thread to perform memtable writes
while another thread is traversing the `flush_scheduler_`, it will cause an
assertion failure in `FlushScheduler::Clear`. To unblock crash recoery tests,
we temporarily disable pipelined write when atomic flush is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5266
Differential Revision: D15142285
Pulled By: riversand963
fbshipit-source-id: a0c20fe4ac543e08feaed602414f982054df7831
Summary:
Since this feature affects the WAL behavior, it seems important our crash-recovery tests cover it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5070
Differential Revision: D14470085
Pulled By: miasantreble
fbshipit-source-id: 9b9682a718a926d57d055e0a5ec867efbd2eb9c1
Summary:
Previously `finalize_and_sanitize` function was always zeroing out `compression_zstd_max_train_bytes`. It was only supposed to do that when non-ZSTD compression was used. But since `--compression_type` was an unknown argument (i.e., one that `db_crashtest.py` does not recognize and blindly forwards to `db_stress`), `finalize_and_sanitize` could not tell whether ZSTD was used. This PR fixes it simply by making `--compression_type` a known argument with snappy as default (same as `db_stress`).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4957
Differential Revision: D13994302
Pulled By: ajkr
fbshipit-source-id: 1b0baea7331397822830970d3698642eb7a7df65
Summary:
Separate flag for enabling option from flag for enabling dedicated atomic stress test. I have found setting the former without setting the latter can detect different problems.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4781
Differential Revision: D13463211
Pulled By: ajkr
fbshipit-source-id: 054f777885b2dc7d5ea99faafa21d6537eee45fd
Summary:
The default for index_block_restart_interval is 1 but some use 16 in production. The patch extends crash test to test both values.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4383
Differential Revision: D9887304
Pulled By: maysamyabandeh
fbshipit-source-id: a8d00fea974a79ad563f9f4d9d7b069e9f746a8f
Summary:
- Add `--compression_max_dict_bytes` and `--compression_zstd_max_train_bytes` flags to stress test
- Randomly enable/disable the above flags in crash test
- Set `--compression_type=zstd` in FB-specific crash test runs
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4234
Differential Revision: D9187207
Pulled By: ajkr
fbshipit-source-id: 8d78cf8d8e1165f2cd1c32e069b73726b5bc1fd2
Summary:
db_stress doesn't cover upper or lower bound in iterators. Try to cover it by randomly assigning a random one. Also in prefix scan tests, with 50% of the chance, set next prefix as the upper bound.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4162
Differential Revision: D8953507
Pulled By: siying
fbshipit-source-id: f0f04e9cb6c07cbebbb82b892ca23e0daeea708b
Summary:
Add the `backup_one_in` and `checkpoint_one_in` options to periodically trigger backups and checkpoints. The directory names contain thread ID to avoid clashing with parallel backups/checkpoints. Enable checkpoint in crash test so our CI runs will use it. Didn't enable backup in crash test since it copies all the files which is too slow.
Closes https://github.com/facebook/rocksdb/pull/4005
Differential Revision: D8472275
Pulled By: ajkr
fbshipit-source-id: ff91bdc37caac4ffd97aea8df96b3983313ac1d5
Summary:
Fixed bug where `db_stress` output a line with a warning followed by a line with an error, and `db_crashtest.py` considered that a success. For example:
```
WARNING: prefix_size is non-zero but memtablerep != prefix_hash
open error: Corruption: SST file is ahead of WALs
```
Closes https://github.com/facebook/rocksdb/pull/4006
Differential Revision: D8473463
Pulled By: ajkr
fbshipit-source-id: 60461bdd7491d9d26c63f7d4ee522a0f88ba3de7
Summary:
format_version=3 changes the format of SST index. This is however not being tested currently since tests only work with the default format_version which is currently 2. The patch extends the most related tests to also test for format_version=3.
Closes https://github.com/facebook/rocksdb/pull/3942
Differential Revision: D8238413
Pulled By: maysamyabandeh
fbshipit-source-id: 915725f55753dd8e9188e802bf471c23645ad035
Summary:
We need to keep the DB directory around since the direct IO check in "db_crashtest.py" relies on it existing. This PR fixes an issue where it was removed after each stress test run during the second half of whitebox crash testing.
Closes https://github.com/facebook/rocksdb/pull/3946
Differential Revision: D8247998
Pulled By: ajkr
fbshipit-source-id: 4e7cffbdab9b40df125e7842d0d59916e76261d3
Summary:
Previously `db_stress` attempted to configure direct I/O dynamically in `SetOptions()` which had multiple problems (ummm must've never been tested):
- It's a DB option so SetDBOptions should've been called instead
- It's not a dynamic option so even SetDBOptions would fail
- It required enabling SyncPoint to mask O_DIRECT since it had no way to detect whether the DB directory was in tmpfs or not. This required locking that consumed ~80% of db_stress CPU.
In this PR I delete the broken dynamic config and instead configure it statically, only enabling it if the DB directory truly supports O_DIRECT.
Closes https://github.com/facebook/rocksdb/pull/3939
Differential Revision: D8238120
Pulled By: ajkr
fbshipit-source-id: 60bb2deebe6c9b54a3f788079261715b4a229279
Summary:
- Any options unknown to `db_crashtest.py` are now passed directly to `db_stress`. This way, we won't need to update `db_crashtest.py` every time `db_stress` gets a new option.
- Remove `db_crashtest.py` redundant arguments where the value is the same as `db_stress`'s default
- Remove `db_crashtest.py` redundant arguments where the value is the same in a previously applied options map. For example, default_params are always applied before whitebox_default_params, so if they require the same value for an argument, that value only needs to be provided in default_params.
- Made the simple option maps applied in addition to the regular option maps. Previously they were exclusive which led to lots of duplication
Closes https://github.com/facebook/rocksdb/pull/3809
Differential Revision: D7885779
Pulled By: ajkr
fbshipit-source-id: 3a3243b55724d6d5bff36e939b582b9b62c538a8
Summary:
- Original commit: a4fb1f8c04
- Revert commit (we reverted as a quick fix to get crash tests passing): 6afe22db2e
This PR includes the contents of the original commit plus two bug fixes, which are:
- In whitebox crash test, only set `--expected_values_path` for `db_stress` runs in the first half of the crash test's duration. In the second half, a fresh DB is created for each `db_stress` run, so we cannot maintain expected state across `db_stress` runs.
- Made `Exists()` return true for `UNKNOWN_SENTINEL` values. I previously had an assert in `Exists()` that value was not `UNKNOWN_SENTINEL`. But it is possible for post-crash-recovery expected values to be `UNKNOWN_SENTINEL` (i.e., if the crash happens in the middle of an update), in which case this assertion would be tripped. The effect of returning true in this case is there may be cases where a `SingleDelete` deletes no data. But if we had returned false, the effect would be calling `SingleDelete` on a key with multiple older versions, which is not supported.
Closes https://github.com/facebook/rocksdb/pull/3793
Differential Revision: D7811671
Pulled By: ajkr
fbshipit-source-id: 67e0295bfb1695ff9674837f2e05bb29c50efc30
Summary:
crash-recovery verification is failing in the whitebox testing, which may or may not be a valid correctness issue -- need more time to investigate. In the meantime, reverting so we don't mask other failures.
Closes https://github.com/facebook/rocksdb/pull/3786
Differential Revision: D7794516
Pulled By: ajkr
fbshipit-source-id: 28ccdfdb9ec9b3b0fb08c15cbf9d2e282201ff33
Summary:
- When options file is provided to db_stress, take supported options from the file instead of from flags
- Call `BuildOptionsTable` after `Open` so it can use `options_` once it has been populated either from flags or from file
- Allow options filename to be passed via `db_crashtest.py`
Closes https://github.com/facebook/rocksdb/pull/3768
Differential Revision: D7755331
Pulled By: ajkr
fbshipit-source-id: 5205cc5deb0d74d677b9832174153812bab9a60a
Summary:
Previously, our `db_stress` tool held the expected state of the DB in-memory, so after crash-recovery, there was no way to verify data correctness. This PR adds an option, `--expected_values_file`, which specifies a file holding the expected values.
In black-box testing, the `db_stress` process can be killed arbitrarily, so updates to the `--expected_values_file` must be atomic. We achieve this by `mmap`ing the file and relying on `std::atomic<uint32_t>` for atomicity. Actually this doesn't provide a total guarantee on what we want as `std::atomic<uint32_t>` could, in theory, be translated into multiple stores surrounded by a mutex. We can verify our assumption by looking at `std::atomic::is_always_lock_free`.
For the `mmap`'d file, we didn't have an existing way to expose its contents as a raw memory buffer. This PR adds it in the `Env::NewMemoryMappedFileBuffer` function, and `MemoryMappedFileBuffer` class.
`db_crashtest.py` is updated to use an expected values file for black-box testing. On the first iteration (when the DB is created), an empty file is provided as `db_stress` will populate it when it runs. On subsequent iterations, that same filename is provided so `db_stress` can check the data is as expected on startup.
Closes https://github.com/facebook/rocksdb/pull/3629
Differential Revision: D7463144
Pulled By: ajkr
fbshipit-source-id: c8f3e82c93e045a90055e2468316be155633bd8b
Summary:
Previously `python tools/db_crashtest.py blackbox` would do no useful work as the crash interval (two minutes) was shorter than the preparation phase. The preparation phase is slow because of the ridiculously inefficient way it computes which keys should not be overwritten. It was doing this for 60M keys since default values were `FLAGS_nooverwritepercent == 60` and `FLAGS_max_key == 100000000`.
Move the "nooverwritepercent" override from whitebox-specific to the general options so it also applies to blackbox test runs. Now preparation phase takes a few seconds.
Closes https://github.com/facebook/rocksdb/pull/3671
Differential Revision: D7457732
Pulled By: ajkr
fbshipit-source-id: 601f4461a6a7e49e50449dcf15aebc9b8a98d6f0
Summary: Grandfather in super old lint issues to make a clean slate for moving forward that allows us to have stronger enforcement on new issues.
Reviewed By: yiwu-arbug
Differential Revision: D6821806
fbshipit-source-id: 22797d31ec58e9eb0255d3b66fedfcfcb0dc127c
Summary:
Add options to `db_stress` (correctness testing tool) to randomly acquire snapshot and release it after some period of time. It's useful for correctness testing of #3009, as well as other parts of compaction that behave differently depending on which snapshots are held.
Closes https://github.com/facebook/rocksdb/pull/3038
Differential Revision: D6086501
Pulled By: ajkr
fbshipit-source-id: 3ec0d8666c78ac507f1f808887c4ff759ba9b865
Summary:
TSAN shows error when we grab too many locks at the same time. In TSAN crash test, make one shard key cover 2^22 keys so that no many keys will be hold at the same time.
Closes https://github.com/facebook/rocksdb/pull/2719
Differential Revision: D5609035
Pulled By: siying
fbshipit-source-id: 930e5d63fff92dbc193dc154c4c615efbdf06c6a
Summary:
filter the warning out and only print it once.
Closes https://github.com/facebook/rocksdb/pull/2137
Differential Revision: D4870925
Pulled By: lightmark
fbshipit-source-id: 91b363ce7f70bce88b0780337f408fc4649139b8
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
Clock-based cache implemenetation aim to have better concurreny than
default LRU cache. See inline comments for implementation details.
Test Plan:
Update cache_test to run on both LRUCache and ClockCache. Adding some
new tests to catch some of the bugs that I fixed while implementing the
cache.
Reviewers: kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61647
Summary:
Tsan crash white-box test was disabled because it never ends. Re-enable it with reduced killing odds.
Add a parameter in crash test script to allow we pass it through an environment variable.
Test Plan: Run it manually.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61053
Summary: filter_deletes option was removed, remove it from crash_test to fix it
Test Plan: make crash_test
Reviewers: yhchiang, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59901
Summary: Default crash test uses prefix hash memtable, which is not compatible to concurrent memtable. Allow prefix test run with skip list and use skip list memtable when concurrent insert is used.
Test Plan: Run "python -u tools/db_crashtest.py whitebox" and watch sometimes skip list is used.
Reviewers: anthony, yhchiang, kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53907
Summary: If users turn on concurrent insert but the memtable doesn't support it, they might see unexcepted crash. Fix it by explicitly fail.
Test Plan:
Run different setting of stress_test and make sure it fails correctly.
Will add a unit test too.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, andrewkr, ngbronson
Reviewed By: ngbronson
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53895
