Summary: as title
Test Plan: options_test
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23283
Summary: This work on my compiler, but it turns out some compilers don't implicitly add constness, see: https://github.com/facebook/rocksdb/issues/284. This diff adds constness explicitly.
Test Plan: still compiles
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23409
Summary:
The compilers we use treat char as signed. However, this is not guarantee of C standard and some compilers (for ARM platform for example), treat char as unsigned. Code that assumes that char is either signed or unsigned is wrong.
This change explicitly casts the char to signed version. This will not break any of our use cases on x86, which, I believe are all of them. In case somebody out there is using RocksDB on ARM AND using bloom filters, they're going to have a bad time. However, it is very unlikely that this is the case.
Test Plan: sanity test with previous commit (with new sanity test)
Reviewers: yhchiang, ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22767
Summary: removed reference to options in WriteBatch and DBImpl::Get()
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23049
Summary:
all shared_ptrs are in immutable_options now. This will also make
options assignment a little cheaper
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23001
Summary:
I found it is almost impossible to get rid of this function in a single
batch. I will take a step by step approach
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22995
Summary:
Introducing WriteController, which is a source of truth about per-DB write delays. Let's define an DB epoch as a period where there are no flushes and compactions (i.e. new epoch is started when flush or compaction finishes). Each epoch can either:
* proceed with all writes without delay
* delay all writes by fixed time
* stop all writes
The three modes are recomputed at each epoch change (flush, compaction), rather than on every write (which is currently the case).
When we have a lot of column families, our current pull behavior adds a big overhead, since we need to loop over every column family for every write. With new push model, overhead on Write code-path is minimal.
This is just the start. Next step is to also take care of stalls introduced by slow memtable flushes. The final goal is to eliminate function MakeRoomForWrite(), which currently needs to be called for every column family by every write.
Test Plan: make check for now. I'll add some unit tests later. Also, perf test.
Reviewers: dhruba, yhchiang, MarkCallaghan, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22791
Summary:
1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file.
2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter.
3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type.
4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h.
5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc
Benchmark: base commit 1d23b5c470
Command:
db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
Read QPS increase for about 30% from 2230002 to 2991411.
Test Plan:
make all check
valgrind db_test
db_stress --use_block_based_filter = 0
./auto_sanity_test.sh
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20979
Summary:
Simply code by removing code path which does not use Arena
from NewInternalIterator
Test Plan:
make all check
make valgrind_check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22395
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545
Summary:
Lots of travis builds are failing because on EnvPosixTest.RandomAccessUniqueID: https://travis-ci.org/facebook/rocksdb/builds/34400833
This is the result of their environment and not because of RocksDB's bug.
Also note that RocksDB works correctly even though UniqueID feature is not present in the system (as it's the case with os x)
Test Plan:
OPT=-DTRAVIS make env_test && ./env_test
Observed that offending tests are not being run
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22803
1, const qualifiers on return types make no sense and will trigger a compile warning: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
2, class HistogramImpl has virtual functions and thus should have a virtual destructor
3, with some toolchain, the macro __STDC_FORMAT_MACROS is predefined and thus should be checked before define
Change-Id: I69747a03bfae88671bfbb2637c80d17600159c99
Signed-off-by: liuhuahang <liuhuahang@zerus.co>
This eliminates the need to remember to call PERF_TIMER_STOP when a section has
been timed. This allows more useful design with the perf timers and enables
possible return value optimizations. Simplistic example:
class Foo {
public:
Foo(int v) : m_v(v);
private:
int m_v;
}
Foo makeFrobbedFoo(int *errno)
{
*errno = 0;
return Foo();
}
Foo bar(int *errno)
{
PERF_TIMER_GUARD(some_timer);
return makeFrobbedFoo(errno);
}
int main(int argc, char[] argv)
{
Foo f;
int errno;
f = bar(&errno);
if (errno)
return -1;
return 0;
}
After bar() is called, perf_context.some_timer would be incremented as if
Stop(&perf_context.some_timer) was called at the end, and the compiler is still
able to produce optimizations on the return value from makeFrobbedFoo() through
to main().
Summary:
BlockBasedTable sst file size can grow to a large size when universal
compaction is used. When index block exceeds 2G, pread seems to fail and
return truncated data and causes "trucated block" error. I tried to use
```
#define _FILE_OFFSET_BITS 64
```
But the problem still persists. Splitting a big write/read into smaller
batches seems to solve the problem.
Test Plan:
successfully compacted a case with resulting sst file at ~90G (2.1G
index block size)
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22569
Summary: No __thread for ios.
Test Plan: compile works for ios now
Reviewers: ljin, dhruba
Reviewed By: dhruba
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22491
Summary: This assert makes Insert O(n^2) instead of O(n) in debug mode. Memtable insert is in the critical path. No need to assert uniqunnes of the key here, since we're adding a sequence number to it anyway.
Test Plan: none
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22443
Summary:
- New Uint64 comparator
- Modify Reader and Builder to take custom user comparators instead of bytewise comparator
- Modify logic for choosing unused user key in builder
- Modify iterator logic in reader
- test changes
Test Plan:
cuckoo_table_{builder,reader,db}_test
make check all
Reviewers: ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22377
Summary: also fix HISTORY.md
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22437
Summary: Add a virtual function in table factory that will print table options
Test Plan: make release
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22149
Summary:
I will move compression related options in a separate diff since this
diff is already pretty lengthy.
I guess I will also need to change JNI accordingly :(
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21915
Summary:
ManifestDumpCommand::DoCommand was allocating a VersionSet and never
freeing it.
Test Plan: make
Reviewers: igor
Reviewed By: igor
Differential Revision: https://reviews.facebook.net/D22221
Summary: I was checking some functions in coding.h and coding.cc when I noticed these unused functions. Let's remove them.
Test Plan: compiles
Reviewers: sdong, ljin, yhchiang, dhruba
Reviewed By: dhruba
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22077
Summary:
auto_roll_logger_test fails from time to time. I wasn't able to repro
the issue but by looking at the code, it seems like the initial ctime_
value can be set to the boundary of the second so it may still have a
chance to get rolled when interval is set to 1 second.
```
util/auto_roll_logger_test.cc:120: failed: 118 > 708
==19470== Syscall param msync(start) points to unaddressable byte(s)
==19470== at 0x4E46CE0: __msync_nocancel (in
/usr/local/fbcode/gcc-4.8.1-glibc-2.17/lib/libpthread-2.17.so)
==19470== by 0x584EFB: access_mem (Ginit.c:137)
==19470== by 0x5834E3: _ULx86_64_access_reg (libunwind_i.h:162)
==19470== by 0x585601: apply_reg_state (Gparser.c:742)
==19470== by 0x5866BE: _ULx86_64_dwarf_find_save_locs (Gparser.c:883)
==19470== by 0x584550: _ULx86_64_dwarf_step (Gstep.c:34)
==19470== by 0x583653: _ULx86_64_step (Gstep.c:71)
==19470== by 0x583FD2: _ULx86_64_tdep_trace (Gtrace.c:217)
==19470== by 0x5831C3: backtrace (backtrace.c:69)
Test Plan: ./auto_roll_logger_test
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21951
Summary: The prefix and postfix operators were mixed up in the autovector class.
Test Plan: Inspection
Reviewers: sdong, kailiu
Reviewed By: kailiu
Differential Revision: https://reviews.facebook.net/D21873
Summary: This is a linux-specific system call.
Test Plan: ran db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: haobo, leveldb
Differential Revision: https://reviews.facebook.net/D21183
Summary:
Was looking at an issue. All options are the same except
compaction_filter was missed from a newer package. Our option dump does
not capture that
Test Plan: make release
Reviewers: sdong, igor, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21765
Summary: 1. write db MANIFEST, CURRENT, IDENTITY, sst files, log files to log before open
Test Plan: run db and check LOG file
Reviewers: ljin, yhchiang, igor, dhruba, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21459
Summary: as title
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21201
* Script for building the unity.cc file via Makefile
* Unity executable Makefile target for testing builds
* Source code changes to fix compilation of unity build
Summary: Made some small changes to fix the broken mac build
Test Plan: make check all in both linux and mac. All tests pass.
Reviewers: sdong, igor, ljin, yhchiang
Reviewed By: ljin, yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20895
Summary:
We now reads table properties in VersionSet::LogAndApply(), which requires options.db_paths to be set. But since ldb_cmd directly creates VersionSet without initialization db_paths, causing a seg fault. This patch fix it by initializing db_paths.
log_and_apply_bench still shows segfault, because table cache is nullptr in VersionSet created.
Test Plan: Run ldb dump_manifest which used to fail.
Reviewers: yhchiang, ljin, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20751
Summary: So that we can avoid calling NowSecs() in MakeRoomForWrite twice
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20529
Summary:
Make StatisticsImpl being able to forward stats to provided statistics
implementation. The main purpose is to allow us to collect internal
stats in the future even when user supplies custom statistics
implementation. It avoids intrumenting 2 sets of stats collection code.
One immediate use case is tuning advisor, which needs to collect some
internal stats, users may not be interested.
Test Plan:
ran db_bench and see stats show up at the end of run
Will run make all check since some tests rely on statistics
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20145
Summary:
Make StatisticsImpl being able to forward stats to provided statistics
implementation. The main purpose is to allow us to collect internal
stats in the future even when user supplies custom statistics
implementation. It avoids intrumenting 2 sets of stats collection code.
One immediate use case is tuning advisor, which needs to collect some
internal stats, users may not be interested.
Test Plan:
ran db_bench and see stats show up at the end of run
Will run make all check since some tests rely on statistics
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20145
Summary:
User gets undefinied error since the definition is not exposed.
Also re-enable the db test with only upper bound check
Test Plan: db_test, rate_limit_test
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20403
Summary:
Fixed the following compile error by replacing pow by shift, as it computes
power of 2.
util/options_builder.cc:133:14: error: no member named 'pow' in namespace 'std'
std::pow(2, std::max(0, std::min(3, level0_stop_writes_trigger -
~~~~~^
1 error generated.
make: *** [util/options_builder.o] Error 1
Test Plan: make success in mac and linux
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20475
Summary:
All public headers need to be under `include/rocksdb` directory. Otherwise, clients include our header files like this:
#include <rocksdb/db.h>
#include <utilities/backupable_db.h> // still our public header!
Also, internally, we include:
#include "utilities/backupable/backupable_db.h" // internal header
#include "utilities/backupable_db.h" // public header
which is confusing.
This way, when we install rocksdb as a system library, we can just copy `include/rocksdb` directory to system's header files. We can't really copy `utilities` directory to system's header files.
Test Plan: compiles
Reviewers: dhruba, ljin, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20409
Summary:
Add a function GetOptions(), where based on four parameters users give: read/write amplification threshold, memory budget for mem tables and target DB size, it picks up a compaction style and parameters for them. Background threads are not touched yet.
One limit of this algorithm: since compression rate and key/value size are hard to predict, it's hard to predict level 0 file size from write buffer size. Simply make 1:1 ratio here.
Sample results: https://reviews.facebook.net/P477
Test Plan: Will add some a unit test where some sample scenarios are given and see they pick the results that make sense
Reviewers: yhchiang, dhruba, haobo, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18741
Summary:
Adding option to save PlainTable index and bloom filter in SST file.
If there is no bloom block and/or index block, PlainTableReader builds
new ones. Otherwise PlainTableReader just use these blocks.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19527
Summary:
This patch adds a target size parameter in options.db_paths and universal compaction will base it to determine which DB path to place a new file.
Level-style stays the same.
Test Plan: Add new unit tests
Reviewers: ljin, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D19869
Summary: Browsing through the code, looks like StatsLogger is not used at all!
Test Plan: compiles
Reviewers: ljin, sdong, yhchiang, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19827
Summary: Add a function to return the perf level. It is to allow a wrapper of DB to increase the perf level and restore the original perf level after finishing the function call.
Test Plan: Add a verification in db_test
Reviewers: yhchiang, igor, ljin
Reviewed By: ljin
Subscribers: xjin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19551
Summary:
Add option and plugin rate limiter for PosixWritableFile. The rate
limiter only applies to flush and compaction. WAL and MANIFEST are
excluded from this enforcement.
Test Plan: db_test
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19425
Summary:
A generic rate limiter that can be shared by threads and rocksdb
instances. Will use this to smooth out write traffic generated by
compaction and flush. This will help us get better p99 behavior on flash
storage.
Test Plan:
unit test output
==== Test RateLimiterTest.Rate
request size [1 - 1023], limit 10 KB/sec, actual rate: 10.374969 KB/sec, elapsed 2002265
request size [1 - 2047], limit 20 KB/sec, actual rate: 20.771242 KB/sec, elapsed 2002139
request size [1 - 4095], limit 40 KB/sec, actual rate: 41.285299 KB/sec, elapsed 2202424
request size [1 - 8191], limit 80 KB/sec, actual rate: 81.371605 KB/sec, elapsed 2402558
request size [1 - 16383], limit 160 KB/sec, actual rate: 162.541268 KB/sec, elapsed 3303500
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19359
Summary:
This diff allows the I/O stats about Flush and Compaction to be reported
in a more accurate way. Instead of measuring the size of a file, it
measure I/O cost in per read / write basis.
Test Plan: make all check
Reviewers: sdong, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19383
Summary:
This diff adds timeout_hint_us to WriteOptions. If it's non-zero, then
1) writes associated with this options MAY be aborted when it has been
waiting for longer than the specified time. If an abortion happens,
associated writes will return Status::TimeOut.
2) the stall time of the associated write caused by flush or compaction
will be limited by timeout_hint_us.
The default value of timeout_hint_us is 0 (i.e., OFF.)
The statistics of timeout writes will be recorded in WRITE_TIMEDOUT.
Test Plan:
export ROCKSDB_TESTS=WriteTimeoutAndDelayTest
make db_test
./db_test
Reviewers: igor, ljin, haobo, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18837
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary:
In this patch, we enhance HashLinkList memtable to reduce performance outliers when a bucket contains too many entries. We switch to skip list for this case to enable binary search.
Add threshold_use_skiplist parameter to determine when a bucket needs to switch to skip list.
The new data structure is documented in comments in the codes.
Test Plan:
make all check
set threshold_use_skiplist in several tests
Reviewers: yhchiang, haobo, ljin
Reviewed By: yhchiang, ljin
Subscribers: nkg-, xjin, dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19299
Summary:
Bloomfilter and hashskiplist's buckets_ allocated by memtable's arena
DynamicBloom: pass arena via constructor, allocate space in SetTotalBits
HashSkipListRep: allocate space of buckets_ using arena.
do not delete it in deconstructor because arena would take care of it.
Several test files are changed.
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D19335
Summary:
Fixed the following warning:
util/options.cc: In constructor ‘rocksdb::ColumnFamilyOptions::ColumnFamilyOptions(const rocksdb::Options&)’:
util/options.cc:157:58: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare]
if (max_bytes_for_level_multiplier_additional.size() < num_levels) {
^
Test Plan: make all check
Reviewers: haobo, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19293
Summary: It seems to me that when ever function MemTableRep::GetIterator(const Slice& slice) is used, we can use MemTableRep::GetDynamicPrefixIterator() instead. Just delete it to simplify the codes.
Test Plan: make all check
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, dhruba, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D19281
Summary:
Currently, when num_levels has been changed to > 7, internally
it will not resize max_bytes_for_level_multiplier_additional.
As a result, max_bytes_for_level_multiplier_additional.size() will
be smaller than num_levels, which causes heap-buffer-overflow.
Test Plan: make all check
Reviewers: haobo, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19275
Summary:
Revert the default setting of InitFromCmdLineArgs() as all the callers
currently provide full set of arguments.
Test Plan:
make reduce_levels_test
./reduce_levels_test
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19257
Summary:
Fixed the following compile error.
tools/reduce_levels_test.cc:89:31: error: no matching function for call to 'InitFromCmdLineArgs'
LDBCommand* level_reducer = LDBCommand::InitFromCmdLineArgs(args);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./util/ldb_cmd.h:56:22: note: candidate function not viable: requires 3 arguments, but 1 was provided
static LDBCommand* InitFromCmdLineArgs(
^
./util/ldb_cmd.h:62:22: note: candidate function not viable: requires 4 arguments, but 1 was provided
static LDBCommand* InitFromCmdLineArgs(
^
1 error generated.
Test Plan:
make reduce_levels_test
./reduce_levels_test
Reviewers: haobo, ljin, sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19251
Summary: Currently ldb tool dump keys either in ascii format or hex format - neither is ideal if the key has a binary structure and is not readable in ascii. This diff also allows LDB tool to be customized in ways beyond DB options.
Test Plan: verify that key formatter works with some simple db with binary key.
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19209
Summary:
After evaluating options for JSON storage, I decided to implement our own. The reason is that we'll be able to optimize it better and we get to reduce unnecessary dependencies (which is what we'd get with folly).
I also plan to write a serializer/deserializer for JSONDocument with our own binary format similar to BSON. That way we'll store binary JSON format in RocksDB instead of the plain-text JSON. This means less storage and faster deserialization.
There are still some inefficiencies left here. I plan to optimize them after we develop a functioning DocumentDB. That way we can move and iterate faster.
Test Plan: added a unit test
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: haobo
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18831
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary: Add two parameters of hash linked list to log distribution of number of entries across all buckets, and a sample row when there are too many entries in one single bucket.
Test Plan: Turn it on in plain_table_db_test and see the logs.
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: leveldb, nkg-, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D19095
Some platforms, particularly Windows, do not have a single method that can
release both a held reader lock and a held writer lock; instead, a
separate method (ReleaseSRWLockShared or ReleaseSRWLockExclusive) must be
called in each case.
This may also be necessary to back MutexRW with a shared_mutex in C++14;
the current language proposal includes both an unlock() and a
shared_unlock() method.
Summary:
Fix a bug causing LOG is not created when max_log_file_size is set.
This bug is reported in issue #174.
Test Plan:
Add TEST(AutoRollLoggerTest, LogFileExistence).
make auto_roll_logger_test
./auto_roll_logger_test
Reviewers: haobo, sdong, ljin, igor, igor2
Reviewed By: igor2
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19053
Summary: as title
Test Plan:
db_bench
the initial result is very promising. I will post results of complete
runs
Reviewers: dhruba, haobo, sdong, igor
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18867
Summary:
Clean PlainTableReader's data structures:
(1) inline bloom_ (in order to do this, change DynamicBloom to allow lazy initialization)
(2) remove some variables only used when initialization from the class
(3) put variables not used in normal read code paths to the end of the class and reference prefix_extractor directly
(4) make Options a reference.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: igor, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18891
Summary: Provide an convenience option to create column families if they are missing from the DB. Task #4460490
Test Plan: added unit test. also, stress test for some time
Reviewers: sdong, haobo, dhruba, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D18951
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.
Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: leveldb, dhruba, yhchiang, igor
Differential Revision: https://reviews.facebook.net/D18513
Summary:
This patch changes meaning of options.bloom_locality: 0 means disable cache line optimization and any positive number means use CACHE_LINE_SIZE as block size (the previous behavior is the block size will be CACHE_LINE_SIZE*options.bloom_locality). By doing it, the divide operations inside a block can be replaced by a shift.
Performance is improved:
https://reviews.facebook.net/P471
Also, improve the basic algorithm in two ways:
(1) make sure num of blocks is an odd number
(2) rotate bytes after every probe in locality mode. Since the divider is 2^n, unless doing it, we are never able to use all the bits.
Improvements of false positive: https://reviews.facebook.net/P459
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: dhruba, yhchiang, igor, leveldb
Differential Revision: https://reviews.facebook.net/D18843
Summary: 220132b65e correctly fixed the issue of thread ID printing when terminating a thread. Nothing wrong with it. This diff prints the ID in the same way as in PosixLogger::logv() so that users can be more easily to correlates them.
Test Plan: run env_test and make sure it prints correctly.
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18819
Summary:
Introducing new compaction style -- FIFO.
FIFO compaction style has write amplification of 1 (+1 for WAL) and it deletes the oldest files when the total DB size exceeds pre-configured values.
FIFO compaction style is suited for storing high-frequency event logs.
Test Plan: Added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
Subscribers: alberts, leveldb
Differential Revision: https://reviews.facebook.net/D18765
Summary: Per request from @nkg-, temporarily print thread ID when a thread terminates. It is a temp solution as we try to minimized stderr messages.
Test Plan: env_test
Reviewers: haobo, igor, dhruba
Reviewed By: igor
CC: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D18753
Summary:
Add a feature to decrease the number of threads in thread pool.
Also instantly schedule more threads if number of threads is increased.
Here is the way it is implemented: each background thread needs its thread ID. After decreasing number of threads, all threads are woken up. The thread with the largest thread ID will terminate. If there are more threads to terminate, the thread will wake up all threads again.
Another change is made so that when number of threads is increased, more threads are created and all previous excessive threads are woken up to do the work.
Test Plan: Add a unit test.
Reviewers: haobo, dhruba
Reviewed By: haobo
CC: yhchiang, igor, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D18675
Summary: Copy improvements from fbcode's version of EnvHdfs to our open-source version. Some very important bug fixes in there.
Test Plan: compiles
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18711
Summary: Cleaned up compaction logging a little bit. Now file sizes are easier to read. Also, removed the trailing space.
Test Plan:
verified that i'm happy with logging output:
files_size[#33(seq=101,sz=98KB,0) #31(seq=81,sz=159KB,0) #26(seq=0,sz=637KB,0)]
Reviewers: sdong, haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18549
Summary:
In order to use arena to a use case that the total allocation size might be small (LogBuffer is already such a case), inline 1KB of data in it, so that it can be mostly in stack or inline in another class.
If always inlining 2KB is a concern, I could make it a template to determine what to inline. However, dependents need to changes. Doesn't go with it for now
Test Plan: make all check.
Reviewers: haobo, igor, yhchiang, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18609
Summary: As title
Test Plan: make all check.
Reviewers: haobo, igor, yhchiang
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18705
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
Summary:
This diff is addressing multiple things with a single goal -- to make RocksDB easier to use:
* Add some functions to Options that make RocksDB easier to tune.
* Add example code for both simple RocksDB and RocksDB with Column Families.
* Rewrite our README.md
Regarding Options, I took a stab at something we talked about for a long time:
* https://www.facebook.com/groups/rocksdb.dev/permalink/563169950448190/
I added functions:
* IncreaseParallelism() -- easy, increases the thread pool and max_background_compactions
* OptimizeLevelStyleCompaction(memtable_memory_budget) -- the easiest way to optimize rocksdb for less stalls with level style compaction. This is very likely not ideal configuration. Feel free to suggest improvements. I used some of Mark's suggestions from here: https://github.com/facebook/rocksdb/issues/54
* OptimizeUniversalStyleCompaction(memtable_memory_budget) -- optimize for universal compaction.
Test Plan: compiled rocksdb. ran examples.
Reviewers: dhruba, MarkCallaghan, haobo, sdong, yhchiang
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18621
Summary: This variable is not used. Remove it.
Test Plan: build.
Reviewers: haobo, igor, yhchiang
Reviewed By: haobo
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18525
Summary:
TLB page allocation errors are now logged to info logs, instead of stderr.
In order to do that, mem table rep's factory functions take a info logger now.
Test Plan: make all check
Reviewers: haobo, igor, yhchiang
Reviewed By: yhchiang
CC: leveldb, yhchiang, dhruba
Differential Revision: https://reviews.facebook.net/D18471
Summary:
db_test includes Benchmark for LogAndApply. This diff removes it from db_test and puts it into a separate log_and_apply bench. I just wanted to play around with our new benchmark framework and figure out how it works.
I would also like to show you how great it is! I believe right set of microbenchmarks can speed up our productivity a lot and help catch early regressions.
Test Plan: no
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18261
Summary: Added a method that executes a callback on every cache entry.
Test Plan: added a unit test
Reviewers: haobo
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D18441
Summary:
Added a new option `max_total_wal_size`. Once the total WAL size goes over that, we make an attempt to flush all column families that still have data in the earliest WAL file.
By default, I calculate `max_total_wal_size` dynamically, that should be good-enough for non-advanced customers.
Test Plan: Added a test
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18345
Summary: Add an option to allocate a piece of memory from huge page TLB. Add options to trigger it in dynamic bloom, plain table indexes andhash linked list hash table.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: nkg-, dhruba, leveldb, igor, yhchiang
Differential Revision: https://reviews.facebook.net/D18357
Summary:
= Major Changes =
* Add a new mem-table representation, HashCuckooRep, which is based cuckoo hash.
Cuckoo hash uses multiple hash functions. This allows each key to have multiple
possible locations in the mem-table.
- Put: When insert a key, it will try to find whether one of its possible
locations is vacant and store the key. If none of its possible
locations are available, then it will kick out a victim key and
store at that location. The kicked-out victim key will then be
stored at a vacant space of its possible locations or kick-out
another victim. In this diff, the kick-out path (known as
cuckoo-path) is found using BFS, which guarantees to be the shortest.
- Get: Simply tries all possible locations of a key --- this guarantees
worst-case constant time complexity.
- Time complexity: O(1) for Get, and average O(1) for Put if the
fullness of the mem-table is below 80%.
- Default using two hash functions, the number of hash functions used
by the cuckoo-hash may dynamically increase if it fails to find a
short-enough kick-out path.
- Currently, HashCuckooRep does not support iteration and snapshots,
as our current main purpose of this is to optimize point access.
= Minor Changes =
* Add IsSnapshotSupported() to DB to indicate whether the current DB
supports snapshots. If it returns false, then DB::GetSnapshot() will
always return nullptr.
Test Plan:
Run existing tests. Will develop a test specifically for cuckoo hash in
the next diff.
Reviewers: sdong, haobo
Reviewed By: sdong
CC: leveldb, dhruba, igor
Differential Revision: https://reviews.facebook.net/D16155
Summary:
This enables user to add a TTL column family to normal DB.
Next step should be to expand StackableDB and create StackableColumnFamily, such that users can for example add geo-spatial column families to normal DB.
Test Plan: added a test
Reviewers: dhruba, haobo, ljin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18201
Summary:
When TransactionLogIterator comes to EOF, it calls UnmarkEOF and continues reading. However, if glibc cached the EOF status of the file, it will get EOF again, even though the new data might have been written to it.
This has been causing errors in Mac OS.
Test Plan: test passes, was failing before
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18381
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary:
Now this gives us the real deal stack trace:
Assertion failed: (false), function GetProperty, file db/db_impl.cc, line 4072.
Received signal 6 (Abort trap: 6)
#0 0x7fff57ce39b9
#1 abort (in libsystem_c.dylib) + 125
#2 basename (in libsystem_c.dylib) + 0
#3 rocksdb::DBImpl::GetProperty(rocksdb::ColumnFamilyHandle*, rocksdb::Slice const&, std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >*) (in db_test) (db_impl.cc:4072)
#4 rocksdb::_Test_Empty::_Run() (in db_test) (testharness.h:68)
#5 rocksdb::_Test_Empty::_RunIt() (in db_test) (db_test.cc:1005)
#6 rocksdb::test::RunAllTests() (in db_test) (testharness.cc:60)
#7 main (in db_test) (db_test.cc:6697)
#8 start (in libdyld.dylib) + 1
Test Plan: added artificial assert, saw great stack trace
Reviewers: haobo, dhruba, ljin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18309
Summary: Sometimes, our tests fail because of normal `assert` call. It would be helpful to see stack trace in that case, too.
Test Plan: Added `assert(false)` and verified it prints out stack trace
Reviewers: haobo, dhruba, sdong, ljin, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18291
Summary: While debugging Mac-only issue with ThreadLocalPtr, this was very useful. Let's print out stack trace in MAC OS, too.
Test Plan: Verified that somewhat useful stack trace was generated on mac. Will run PrintStack() on linux, too.
Reviewers: ljin, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18189
Summary:
make singleton a static member instead of dynamic object. This should
also avoid the race on unique_ptr
Test Plan: make all check
Reviewers: igor, haobo, sdong
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18177
Summary:
Using ThreadLocalPtr as a flag to determine if a mutex is locked or not enables us to implement AssertNotHeld(). It also makes AssertHeld() actually correct.
I had to remove port::Mutex as a dependency for util/thread_local.h, but that's fine since we can just use std::mutex :)
Test Plan: make check
Reviewers: ljin, dhruba, haobo, sdong, yhchiang
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18171
Summary: Calling Fsync()/Sync() on a file should give the guarantee that whatever you written to the file is now persisted. This is currently not the case, since we might have some data left in application cache as we do Fsync()/Sync(). For example, BuildTable() calls Fsync() without the flush, assuming all sst data is now persisted, but it's actually not. This may result in big inconsistencies.
Test Plan: no test
Reviewers: sdong, dhruba, haobo, ljin, yhchiang
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18159
Summary: Added benchmark functionality on the lines of folly/Benchmark.h
Test Plan: Added unit tests
Reviewers: igor, haobo, sdong, ljin, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17973
Summary: For some reason, on a subset of our continuous build machines, preallocation is allocating 8 block more than it should be. Let's relax the test a little bit -- now we require the test to allocate *at least* the number of blocks as we told them to.
Test Plan: no
Reviewers: ljin, haobo, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18141
Summary:
We don't really need sync_point.o if we're compiling with NDEBUG.
This diff depends on D17823
Test Plan: compiles
Reviewers: haobo, ljin, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17829
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary:
This is first step of my effort to reduce size of librocksdb.a for use in mobile.
ldb object files are huge and are ment to be used as a command line tool. I moved them to `tools/` directory and include them only when compiling `ldb`
This diff reduced librocksdb.a from 42MB to 39MB on my mac (not stripped).
Test Plan: ran ldb
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17823
Summary: XCode for some reason injects `#define DEBUG 1` into our code, which makes compile fail because we use `DEBUG` keyword for other stuff. This diff fixes the issue by renaming `DEBUG` to `DEBUG_LEVEL`.
Test Plan: compiles
Reviewers: dhruba, haobo, sdong, yhchiang, ljin
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17709
Summary: Compiling for iOS has by default turned on -Wmissing-prototypes, which causes rocksdb to fail compiling. This diff turns on -Wmissing-prototypes in our compile options and cleans up all functions with missing prototypes.
Test Plan: compiles
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17649
Summary:
filluniquerandom is painfully slow due to the naive bitmap check to find
out if a key has been seen before. Majority of time is spent on searching
the last few keys. Split a giant BitSet to smaller ones so that we can
quickly check if a BitSet is full and thus can skip quickly.
It used to take over one hour to filluniquerandom for 100M keys, now it
takes about 10 mins.
Test Plan:
unit test
also verified correctness in db_bench and make sure all keys are
generated
Reviewers: igor, haobo, yhchiang
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17607
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
Summary: This will allow us to disable them completely for iOS or for better performance
Test Plan: will run make all check
Reviewers: igor, haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17511
Summary: I think this issue was caused by bad merge. We have to initialize bloom_locality, otherwise valgrind complains: "Use of uninitialised value of size 8"
Test Plan: Run valgrind ./prefix_test
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17553
Summary: per sdong's request, this will help processor prefetch on n->key case.
Test Plan: make all check
Reviewers: sdong, haobo, igor
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17415
Summary: Otherwise, if we compile on machine with SSE4.2 support and run it on machine without the support, we will fail.
Test Plan: compiles, verified that isSse42() gets called.
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17505
Summary:
I had to make number of changes to the code and Makefile:
* Add `make lib`, that will create static library without debug info. We need this to avoid growing binary too much. Currently it's 14MB.
* Remove cpuinfo() function and use __SSE4_2__ macro. We actually used the macro as part of Fast_CRC32() function.
As a result, I also accidentally fixed this issue: https://www.facebook.com/groups/rocksdb.dev/permalink/549700778461774/?stream_ref=2
* Remove __thread locals in OS_MACOSX
Test Plan: `make lib PLATFORM=IOS`
Reviewers: ljin, haobo, dhruba, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17475
Summary: Fix some signed and unsigned comparisons to make some other build script happy.
Test Plan: Build and run those changed tests
Reviewers: ljin, igor, haobo
Reviewed By: igor
CC: yhchiang, dhruba, kailiu, leveldb
Differential Revision: https://reviews.facebook.net/D17463
Summary: as title, make it easy to turn on/off profiling at per thread level.
Test Plan: make check
Reviewers: sdong, ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17469
Summary: This patch fixed a race condition where a log file is moved to archived dir in the middle of GetSortedWalFiles. Without the fix, the log file would be missed in the result, which leads to transaction log iterator gap. A test utility SyncPoint is added to help reproducing the race condition.
Test Plan: TransactionLogIteratorRace; make check
Reviewers: dhruba, ljin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17121
Disassembling the Extend function shows something that looks
much more healthy now. The SSE 4.2 instructions are right
there in the body of the function.
Intel(R) Core(TM) i7-3540M CPU @ 3.00GHz
Before:
crc32c: 1.305 micros/op 766260 ops/sec; 2993.2 MB/s (4K per op)
After:
crc32c: 0.442 micros/op 2263843 ops/sec; 8843.1 MB/s (4K per op)
Summary: to make it less CPU intensive
Test Plan: ran it
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17403
Summary:
Fixed a compile error which tries to check whether a size_t < 0 in env_posix.cc
util/env_posix.cc:180:16: error: comparison of unsigned expression < 0 is always false [-Werror,-Wtautological-compare]
} while (r < 0 && errno == EINTR);
~ ^ ~
1 error generated.
Test Plan: make check all
Reviewers: igor, haobo
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17379
Summary:
If auto roll logger can't create a new LOG file on roll (if, for example, somebody deletes rocksdb directory while rocksdb is running, khm), we'll try to call Logv on invalid address and get a SIGSEGV. This diff will fix the issue
Here's the paste of the stack trace: https://phabricator.fb.com/P8276386 (fb-only)
Test Plan: make check is fine, although not really testing error condition
Reviewers: haobo, ljin, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17367
Summary: EINTR means 'please retry'. We don't do that currenty. We should.
Test Plan: make check, although it doesn't really test the new code. we'll just have to believe in the code!
Reviewers: haobo, ljin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17349
Summary: this causes overflow and asan failure
Test Plan: make asan_check
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17301
Summary: Since we are optimizing for server workloads, some default values are not optimized any more. We change some of those values that I feel it's less prone to regression bugs.
Test Plan: make all check
Reviewers: dhruba, haobo, ljin, igor, yhchiang
Reviewed By: igor
CC: leveldb, MarkCallaghan
Differential Revision: https://reviews.facebook.net/D16995
Summary: int -> uint64_t
Test Plan:
it think it is pretty obvious
will run asan_check before committing
Reviewers: igor, haobo
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17241
Summary:
By constraining the probes within cache line(s), we can improve the
cache miss rate thus performance. This probably only makes sense for
in-memory workload so defaults the option to off.
Numbers and comparision can be found in wiki:
https://our.intern.facebook.com/intern/wiki/index.php/Ljin/rocksdb_perf/2014_03_17#Bloom_Filter_Study
Test Plan: benchmarked this change substantially. Will run make all check as well
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17133
Summary:
NewFixedPrefixTransform is leaked in default options. Broken by b47812fba6
Also included in the diff some code cleanup
Test Plan:
valgrind env_test
also make check
Reviewers: haobo, danguo, yhchiang
Reviewed By: danguo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17211
Summary:
This diff adds a new CompactionFilterV2 API that roll up the
decisions of kv pairs during compactions. These kv pairs must share the
same key prefix. They are buffered inside the db.
typedef std::vector<Slice> SliceVector;
virtual std::vector<bool> Filter(int level,
const SliceVector& keys,
const SliceVector& existing_values,
std::vector<std::string>* new_values,
std::vector<bool>* values_changed
) const = 0;
Application can override the Filter() function to operate
on the buffered kv pairs. More details in the inline documentation.
Test Plan:
make check. Added unit tests to make sure Keep, Delete,
Change all works.
Reviewers: haobo
CCs: leveldb
Differential Revision: https://reviews.facebook.net/D15087
Summary:
* PartialMerge api now takes a list of operands instead of two operands.
* Add min_pertial_merge_operands to Options, indicating the minimum
number of operands to trigger partial merge.
* This diff is based on Schalk's previous diff (D14601), but it also
includes necessary changes such as updating the pure C api for
partial merge.
Test Plan:
* make check all
* develop tests for cases where partial merge takes more than two
operands.
TODOs (from Schalk):
* Add test with min_partial_merge_operands > 2.
* Perform benchmarks to measure the performance improvements (can probably
use results of task #2837810.)
* Add description of problem to doc/index.html.
* Change wiki pages to reflect the interface changes.
Reviewers: haobo, igor, vamsi
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16815
Summary: LogBuffer::AddLogToBuffer() uses vsnprintf() in the wrong way, which might cause buffer overflow when log line is too line. Fix it.
Test Plan: Add a unit test to cover most LogBuffer's most logic.
Reviewers: igor, haobo, dhruba
Reviewed By: igor
CC: ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17103
Summary:
Everytime a client opens a DB, we do a sanity check that:
* checks the existance of all the necessary files
* verifies that file sizes are correct
Some of the code was stolen from https://reviews.facebook.net/D16935
Test Plan: added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17097
Summary: Added a function/command to check the consistency of live files' meta data
Test Plan:
Manual test (size mismatch, file not exist).
Command test script.
Reviewers: haobo
Reviewed By: haobo
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D16935
Summary:
Based on my recent findings (posted in our internal group), if we use fallocate without KEEP_SIZE flag, we get superior performance of fdatasync() in append-only workloads.
This diff provides an option for user to not use KEEP_SIZE flag, thus optimizing his sync performance by up to 2x-3x.
At one point we also just called posix_fallocate instead of fallocate, which isn't very fast: http://code.woboq.org/userspace/glibc/sysdeps/posix/posix_fallocate.c.html (tl;dr it manually writes out zero bytes to allocate storage). This diff also fixes that, by first calling fallocate and then posix_fallocate if fallocate is not supported.
Test Plan: make check
Reviewers: dhruba, sdong, haobo, ljin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16761