Commit Graph

62 Commits

Author SHA1 Message Date
Baptiste Lemaire
837705ad80 Make mempurge a background process (equivalent to in-memory compaction). (#8505)
Summary:
In https://github.com/facebook/rocksdb/issues/8454, I introduced a new process baptized `MemPurge` (memtable garbage collection). This new PR is built upon this past mempurge prototype.
In this PR, I made the `mempurge` process a background task, which provides superior performance since the mempurge process does not cling on the db_mutex anymore, and addresses severe restrictions from the past iteration (including a scenario where the past mempurge was failling, when a memtable was mempurged but was still referred to by an iterator/snapshot/...).
Now the mempurge process ressembles an in-memory compaction process: the stack of immutable memtables is filtered out, and the useful payload is used to populate an output memtable. If the output memtable is filled at more than 60% capacity (arbitrary heuristic) the mempurge process is aborted and a regular flush process takes place, else the output memtable is kept in the immutable memtable stack. Note that adding this output memtable to the `imm()` memtable stack does not trigger another flush process, so that the flush thread can go to sleep at the end of a successful mempurge.
MemPurge is activated by making the `experimental_allow_mempurge` flag `true`. When activated, the `MemPurge` process will always happen when the flush reason is `kWriteBufferFull`.
The 3 unit tests confirm that this process supports `Put`, `Get`, `Delete`, `DeleteRange` operators and is compatible with `Iterators` and `CompactionFilters`.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8505

Reviewed By: pdillinger

Differential Revision: D29619283

Pulled By: bjlemaire

fbshipit-source-id: 8a99bee76b63a8211bff1a00e0ae32360aaece95
2021-07-09 17:23:59 -07:00
Baptiste Lemaire
9dc887ece0 Memtable "MemPurge" prototype (#8454)
Summary:
Implement an experimental feature called "MemPurge", which consists in purging "garbage" bytes out of a memtable and reuse the memtable struct instead of making it immutable and eventually flushing its content to storage.
The prototype is by default deactivated and is not intended for use. It is intended for correctness and validation testing. At the moment, the "MemPurge" feature can be switched on by using the `options.experimental_allow_mempurge` flag. For this early stage, when the allow_mempurge flag is set to `true`, all the flush operations will be rerouted to perform a MemPurge. This is a temporary design decision that will give us the time to explore meaningful heuristics to use MemPurge at the right time for relevant workloads . Moreover, the current MemPurge operation only supports `Puts`, `Deletes`, `DeleteRange` operations, and handles `Iterators` as well as `CompactionFilter`s that are invoked at flush time .
Three unit tests are added to `db_flush_test.cc` to test if MemPurge works correctly (and checks that the previously mentioned operations are fully supported thoroughly tested).
One noticeable design decision is the timing of the MemPurge operation in the memtable workflow: for this prototype, the mempurge happens when the memtable is switched (and usually made immutable). This is an inefficient process because it implies that the entirety of the MemPurge operation happens while holding the db_mutex. Future commits will make the MemPurge operation a background task (akin to the regular flush operation) and aim at drastically enhancing the performance of this operation. The MemPurge is also not fully "WAL-compatible" yet, but when the WAL is full, or when the regular MemPurge operation fails (or when the purged memtable still needs to be flushed), a regular flush operation takes place. Later commits will also correct these behaviors.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8454

Reviewed By: anand1976

Differential Revision: D29433971

Pulled By: bjlemaire

fbshipit-source-id: 6af48213554e35048a7e03816955100a80a26dc5
2021-07-02 05:23:02 -07:00
Baptiste Lemaire
e817bc9628 Added memtable garbage statistics (#8411)
Summary:
**Summary**:
2 new statistics counters are added to RocksDB: `MEMTABLE_PAYLOAD_BYTES_AT_FLUSH` and `MEMTABLE_GARBAGE_BYTES_AT_FLUSH`. The former tracks how many raw bytes of useful data are present on the memtable at flush time, whereas the latter is tracks how many of these raw bytes are considered garbage, meaning that they ended up not being imported on the SSTables resulting from the flush operations.

**Unit test**: run `make db_flush_test -j$(nproc); ./db_flush_test` to run the unit test.
This executable includes 3 tests, that test support and correct stat calculations for workloads with inserts, deletes, and DeleteRanges. The parameters are set such that the workloads are performed on a single memtable, and a single SSTable is created as a result of the flush operation. The flush operation is manually called in the test file. The tests verify that the values of these 2 statistics counters introduced in this PR  can be exactly predicted, showing that we have a full understanding of the underlying operations.

**Performance testing**:
`./db_bench -statistics -benchmarks=fillrandom -num=10000000` repeated 10 times.
Timing done using "date" function in a bash script.
_Results_:
Original Rocksdb fork: mean 66.6 sec, std 1.18 sec.
This feature branch: mean 67.4 sec, std 1.35 sec.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8411

Reviewed By: akankshamahajan15

Differential Revision: D29150629

Pulled By: bjlemaire

fbshipit-source-id: 7b3c2e86d50c6aa34fa50fd134282eacb543a5b1
2021-06-18 04:57:27 -07:00
sherriiiliu
e6534900bd Fix possible hang issue in ~DBImpl() when flush is scheduled in LOW pool (#8125)
Summary:
In DBImpl::CloseHelper, we wait for bg_compaction_scheduled_
and bg_flush_scheduled_ to drop to 0. Unschedule is called prior
to cancel any unscheduled flushes/compactions. It is assumed that
anything in the high priority is a flush, and anything in the low
priority pool is a compaction. This assumption, however, is broken when
the high-pri pool is full.
As a result, bg_compaction_scheduled_ can go < 0 and bg_flush_scheduled_
will remain > 0 and DB can be in hang state.
The fix is, we decrement the `bg_{flush,compaction,bottom_compaction}_scheduled_`
inside the `Unschedule{Flush,Compaction,BottomCompaction}Callback()`s. DB
`mutex_` will make the counts atomic in `Unschedule`.
Related discussion: https://github.com/facebook/rocksdb/issues/7928

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8125

Test Plan: Added new test case which hangs without the fix.

Reviewed By: jay-zhuang

Differential Revision: D27390043

Pulled By: ajkr

fbshipit-source-id: 78a367fba9a59ac5607ad24bd1c46dc16d5ec110
2021-03-30 18:35:20 -07:00
Zhichao Cao
c810947184 Separate handling of WAL Sync io error with SST flush io error (#8049)
Summary:
In previous codebase, if WAL is used, all the retryable IO Error will be treated as hard error. So write is stalled. In this PR, the retryable IO error from WAL sync is separated from SST file flush io error. If WAL Sync is ok and retryable IO Error only happens during SST flush, the error is mapped to soft error. So user can continue insert to Memtable and append to WAL.

Resolve the bug that if WAL sync fails, the memtable status does not roll back due to calling PickMemtable early than calling and checking SyncClosedLog.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8049

Test Plan: added new unit test, make check

Reviewed By: anand1976

Differential Revision: D26965529

Pulled By: zhichao-cao

fbshipit-source-id: f5fecb66602212523c92ee49d7edcb6065982410
2021-03-18 14:33:16 -07:00
Levi Tamasi
a46f080cce Break down the amount of data written during flushes/compactions per file type (#8013)
Summary:
The patch breaks down the "bytes written" (as well as the "number of output files")
compaction statistics into two, so the values are logged separately for table files
and blob files in the info log, and are shown in separate columns (`Write(GB)` for table
files, `Wblob(GB)` for blob files) when the compaction statistics are dumped.
This will also come in handy for fixing the write amplification statistics, which currently
do not consider the amount of data read from blob files during compaction. (This will
be fixed by an upcoming patch.)

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8013

Test Plan: Ran `make check` and `db_bench`.

Reviewed By: riversand963

Differential Revision: D26742156

Pulled By: ltamasi

fbshipit-source-id: 31d18ee8f90438b438ca7ed1ea8cbd92114442d5
2021-03-02 09:48:00 -08:00
Zhichao Cao
d1c510baec Handoff checksum Implementation (#7523)
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523

Test Plan: add new unit test, pass make check/ make asan_check

Reviewed By: pdillinger

Differential Revision: D24313271

Pulled By: zhichao-cao

fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
2021-02-10 22:20:32 -08:00
mrambacher
12f1137355 Add a SystemClock class to capture the time functions of an Env (#7858)
Summary:
Introduces and uses a SystemClock class to RocksDB.  This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.

Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead.  There are likely more places that can be changed, but this is a start to show what can/should be done.  Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.

There are several Env classes that implement these functions.  Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR.  It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).

Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858

Reviewed By: pdillinger

Differential Revision: D26006406

Pulled By: mrambacher

fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
2021-01-25 22:09:11 -08:00
Levi Tamasi
431e8afba7 Do not explicitly flush blob files when using the integrated BlobDB (#7892)
Summary:
In the original stacked BlobDB implementation, which writes blobs to blob files
immediately and treats blob files as logs, it makes sense to flush the file after
writing each blob to protect against process crashes; however, in the integrated
implementation, which builds blob files in the background jobs, this unnecessarily
reduces performance. This patch fixes this by simply adding a `do_flush` flag to
`BlobLogWriter`, which is set to `true` by the stacked implementation and to `false`
by the new code. Note: the change itself is trivial but the tests needed some work;
since in the new implementation, blobs are now buffered, adding a blob to
`BlobFileBuilder` is no longer guaranteed to result in an actual I/O. Therefore, we can
no longer rely on `FaultInjectionTestEnv` when testing failure cases; instead, we
manipulate the return values of I/O methods directly using `SyncPoint`s.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7892

Test Plan: `make check`

Reviewed By: jay-zhuang

Differential Revision: D26022814

Pulled By: ltamasi

fbshipit-source-id: b3dce419f312137fa70d84cdd9b908fd5d60d8cd
2021-01-25 13:32:33 -08:00
Cheng Chang
70f2e0916a Write min_log_number_to_keep to MANIFEST during atomic flush under 2 phase commit (#7570)
Summary:
When 2 phase commit is enabled, if there are prepared data in a WAL, the WAL should be kept, the minimum log number for such a WAL is written to MANIFEST during flush. In atomic flush, such information is not written to MANIFEST.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7570

Test Plan: Added a new unit test `DBAtomicFlushTest.ManualFlushUnder2PC`, this test fails in atomic flush without this PR, after this PR, it succeeds.

Reviewed By: riversand963

Differential Revision: D24394222

Pulled By: cheng-chang

fbshipit-source-id: 60ce74b21b704804943be40c8de01b41269cf116
2020-12-03 19:22:24 -08:00
Cheng Chang
8c93b16f02 Track WAL in MANIFEST: Update logic for computing min_log_number_to_keep in atomic flush (#7660)
Summary:
The logic for computing min_log_number_to_keep in atomic flush was incorrect.

For example, when all column families are flushed, the min_log_number_to_keep should be the latest new log. But the incorrect logic calls `PrecomputeMinLogNumberToKeepNon2PC` for each column family, and returns the minimum of them. However, `PrecomputeMinLogNumberToKeepNon2PC(cf)` assumes column families other than `cf` are flushed, but in case all column families are flushed, this assumption is incorrect.

Without this fix, the WAL referenced by the computed min_log_number_to_keep may actually contain no unflushed data, so the WAL might have actually been deleted from disk on recovery, then an incorrect error `Corruption: missing WAL` will be reported.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7660

Test Plan:
run `make crash_test_with_atomic_flush`  on devserver
added a unit test in `db_flush_test`

Reviewed By: riversand963

Differential Revision: D24906265

Pulled By: cheng-chang

fbshipit-source-id: 08deda62e71f67f59e3b7925cdd86dd09bd4f430
2020-11-17 15:55:55 -08:00
mrambacher
f35f7f2704 Fix many tests to run with MEM_ENV and ENCRYPTED_ENV; Introduce a MemoryFileSystem class (#7566)
Summary:
This PR does a few things:

1.  The MockFileSystem class was split out from the MockEnv.  This change would theoretically allow a MockFileSystem to be used by other Environments as well (if we created a means of constructing one).  The MockFileSystem implements a FileSystem in its entirety and does not rely on any Wrapper implementation.

2.  Make the RocksDB test suite work when MOCK_ENV=1 and ENCRYPTED_ENV=1 are set.  To accomplish this, a few things were needed:
- The tests that tried to use the "wrong" environment (Env::Default() instead of env_) were updated
- The MockFileSystem was changed to support the features it was missing or mishandled (such as recursively deleting files in a directory or supporting renaming of a directory).

3.  Updated the test framework to have a ROCKSDB_GTEST_SKIP macro.  This can be used to flag tests that are skipped.  Currently, this defaults to doing nothing (marks the test as SUCCESS) but will mark the tests as SKIPPED when RocksDB is upgraded to a version of gtest that supports this (gtest-1.10).

I have run a full "make check" with MEM_ENV, ENCRYPTED_ENV,  both, and neither under both MacOS and RedHat.  A few tests were disabled/skipped for the MEM/ENCRYPTED cases.  The error_handler_fs_test fails/hangs for MEM_ENV (presumably a timing problem) and I will introduce another PR/issue to track that problem.  (I will also push a change to disable those tests soon).  There is one more test in DBTest2 that also fails which I need to investigate or skip before this PR is merged.

Theoretically, this PR should also allow the test suite to run against an Env loaded from the registry, though I do not have one to try it with currently.

Finally, once this is accepted, it would be nice if there was a CircleCI job to run these tests on a checkin so this effort does not become stale.  I do not know how to do that, so if someone could write that job, it would be appreciated :)

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7566

Reviewed By: zhichao-cao

Differential Revision: D24408980

Pulled By: jay-zhuang

fbshipit-source-id: 911b1554a4d0da06fd51feca0c090a4abdcb4a5f
2020-10-27 10:33:09 -07:00
Levi Tamasi
a7a04b6898 Integrate BlobFileBuilder into the compaction process (#7573)
Summary:
Similarly to how https://github.com/facebook/rocksdb/issues/7345
integrated blob file writing into the flush process,
the patch adds support for writing blob files to the compaction logic.
Namely, if `enable_blob_files` is set, large values encountered during
compaction are extracted to blob files and replaced with blob indexes.
The resulting blob files are then logged to the MANIFEST as part of the
compaction job's `VersionEdit` and added to the `Version` alongside any
table files written by the compaction. Any errors during blob file building fail
the compaction job.

There will be a separate follow-up patch to perform blob garbage collection
during compactions.

In addition, the patch continues to chip away at the mess around computing
various compaction related statistics by eliminating some code duplication
and by making the `num_output_files` and `bytes_written` stats more consistent
for flushes, compactions, and recovery.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7573

Test Plan: `make check`

Reviewed By: riversand963

Differential Revision: D24404696

Pulled By: ltamasi

fbshipit-source-id: 21216af3a172ad3ce8f85d11cd30923784ae426c
2020-10-26 13:51:55 -07:00
Levi Tamasi
e8cb32ed67 Introduce BlobFileCache and add support for blob files to Get() (#7540)
Summary:
The patch adds blob file support to the `Get` API by extending `Version` so that
whenever a blob reference is read from a file, the blob is retrieved from the corresponding
blob file and passed back to the caller. (This is assuming the blob reference is valid
and the blob file is actually part of the given `Version`.) It also introduces a cache
of `BlobFileReader`s called `BlobFileCache` that enables sharing `BlobFileReader`s
between callers. `BlobFileCache` uses the same backing cache as `TableCache`, so
`max_open_files` (if specified) limits the total number of open (table + blob) files.

TODO: proactively open/cache blob files and pin the cache handles of the readers in the
metadata objects similarly to what `VersionBuilder::LoadTableHandlers` does for
table files.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7540

Test Plan: `make check`

Reviewed By: riversand963

Differential Revision: D24260219

Pulled By: ltamasi

fbshipit-source-id: a8a2a4f11d3d04d6082201b52184bc4d7b0857ba
2020-10-15 13:04:47 -07:00
Zhichao Cao
861e544335 Add db_flush_test to ASSERT_STATUS_CHECKED list (#7476)
Summary:
Added status check enforcement for db_flush_test

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7476

Test Plan: ASSERT_STATUS_CHECKED=1 make -j48 db_flush_test

Reviewed By: akankshamahajan15

Differential Revision: D24033752

Pulled By: zhichao-cao

fbshipit-source-id: d957934e1666d0043bebdd8a4149e94cdcbbb89b
2020-10-12 15:18:00 -07:00
Levi Tamasi
b0e7834100 Integrate blob file writing with the flush logic (#7345)
Summary:
The patch adds support for writing blob files during flush by integrating
`BlobFileBuilder` with the flush logic, most importantly, `BuildTable` and
`CompactionIterator`. If `enable_blob_files` is set, large values are extracted
to blob files and replaced with references. The resulting blob files are then
logged to the MANIFEST as part of the flush job's `VersionEdit` and
added to the `Version`, similarly to table files. Errors related to writing
blob files fail the flush, and any blob files written by such jobs are immediately
deleted (again, similarly to how SST files are handled). In addition, the patch
extends the logging and statistics around flushes to account for the presence
of blob files (e.g. `InternalStats::CompactionStats::bytes_written`, which is
used for calculating write amplification, now considers the blob files as well).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7345

Test Plan: Tested using `make check` and `db_bench`.

Reviewed By: riversand963

Differential Revision: D23506369

Pulled By: ltamasi

fbshipit-source-id: 646885f22dfbe063f650d38a1fedc132f499a159
2020-09-14 21:11:43 -07:00
sdong
b194c21bba Whole DBTest to skip fsync (#7274)
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.

This commit reinstates https://github.com/facebook/rocksdb/issues/7049, whose un-revert was lost in an automatic
infrastructure mis-merge.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7274

Test Plan: Run all existing files.

Reviewed By: pdillinger

Differential Revision: D23177444

fbshipit-source-id: 1f61690b2ac6333c3b2c87176fef6b2cba086b33
2020-08-17 18:42:25 -07:00
mrambacher
c7c7b07f06 More Makefile Cleanup (#7097)
Summary:
Cleans up some of the dependencies on test code in the Makefile while building tools:
- Moves the test::RandomString, DBBaseTest::RandomString into Random
- Moves the test::RandomHumanReadableString into Random
- Moves the DestroyDir method into file_utils
- Moves the SetupSyncPointsToMockDirectIO into sync_point.
- Moves the FaultInjection Env and FS classes under env

These changes allow all of the tools to build without dependencies on test_util, thereby simplifying the build dependencies.  By moving the FaultInjection code, the dependency in db_stress on different libraries for debug vs release was eliminated.

Tested both release and debug builds via Make and CMake for both static and shared libraries.

More work remains to clean up how the tools are built and remove some unnecessary dependencies.  There is also more work that should be done to get the Makefile and CMake to align in their builds -- what is in the libraries and the sizes of the executables are different.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7097

Reviewed By: riversand963

Differential Revision: D22463160

Pulled By: pdillinger

fbshipit-source-id: e19462b53324ab3f0b7c72459dbc73165cc382b2
2020-07-09 14:35:17 -07:00
Jay Zhuang
00de699096 Replace reinterpret_cast with static_cast_with_check (#7067)
Summary:
Replace `reinterpret_cast` with `static_cast_with_check` for `DBImpl` and `ColumnFamilyHandleImpl`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7067

Reviewed By: siying

Differential Revision: D22361587

Pulled By: jay-zhuang

fbshipit-source-id: dfe9e8f3af39c3d27cc372c55ab9ad905eb0a5a1
2020-07-02 19:25:41 -07:00
Peter Dillinger
52d59e0c93 Revert "Whole DBTest to skip fsync (#7049)" (#7070)
Summary:
This reverts commit 4f1534bdb0.

This commit caused failures and deadlocks in
MultiThreadedDBTest.MultiThreaded/69 and others.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7070

Reviewed By: riversand963

Differential Revision: D22358778

Pulled By: pdillinger

fbshipit-source-id: faf8f2cb469a7063a113921c8e9c64a9f7610dac
2020-07-02 10:22:43 -07:00
sdong
4f1534bdb0 Whole DBTest to skip fsync (#7049)
Summary:
After https://github.com/facebook/rocksdb/pull/7036, we still see extra DBTest that can timeout when running 10 or 20 in parallel. Expand skip-fsync mode in whole DBTest. Still preserve other tests from doing this mode to be conservative.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7049

Test Plan: Run all existing files.

Reviewed By: pdillinger

Differential Revision: D22301700

fbshipit-source-id: f9a9e3b3b26ce640665a47cb8bff33ba0c89b565
2020-07-01 19:37:56 -07:00
sdong
afa3518839 Revert "Update googletest from 1.8.1 to 1.10.0 (#6808)" (#6923)
Summary:
This reverts commit 8d87e9cea1.

Based on offline discussions, it's too early to upgrade to gtest 1.10, as it prevents some developers from using an older version of gtest to integrate to some other systems. Revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6923

Reviewed By: pdillinger

Differential Revision: D21864799

fbshipit-source-id: d0726b1ff649fc911b9378f1763316200bd363fc
2020-06-03 15:55:03 -07:00
Zhichao Cao
2adb7e3768 Fix potential overflow of unsigned type in for loop (#6902)
Summary:
x.size() -1 or y - 1 can overflow to an extremely large value when x.size() pr y is 0 when they are unsigned type. The end condition of i in the for loop will be extremely large, potentially causes segment fault. Fix them.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6902

Test Plan: pass make asan_check

Reviewed By: ajkr

Differential Revision: D21843767

Pulled By: zhichao-cao

fbshipit-source-id: 5b8b88155ac5a93d86246d832e89905a783bb5a1
2020-06-02 15:05:07 -07:00
Adam Retter
8d87e9cea1 Update googletest from 1.8.1 to 1.10.0 (#6808)
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6808

Reviewed By: anand1976

Differential Revision: D21483984

Pulled By: pdillinger

fbshipit-source-id: 70c5eff2bd54ddba469761d95e4cd4611fb8e598
2020-06-01 20:33:42 -07:00
sdong
fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
Yanqin Jin
f361cedf06 Atomic flush rollback once on failure (#6385)
Summary:
Before this fix, atomic flush codepath may hit an assertion failure on a specific failure case.
If all flush jobs within an atomic flush succeed (they do not write to MANIFEST), but batch writing version edits to MANIFEST fails, then `cfd->imm()->RollbackMemTableFlush()` will be called twice, and the second invocation hits assertion failure `assert(m->flush_in_progress_)` since the first invocation resets the variable `flush_in_progress_` to false already.

Test plan (dev server):
```
./db_flush_test --gtest_filter=DBAtomicFlushTest/DBAtomicFlushTest.RollbackAfterFailToInstallResults
make check
```
Both must succeed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6385

Differential Revision: D19782943

Pulled By: riversand963

fbshipit-source-id: 84e1592625e729d1b70fdc8479959387a74cb121
2020-02-07 10:52:10 -08:00
Yanqin Jin
09fcf4fb6b Fix a potential bug scheduling unnecessary threads (#6104)
Summary:
RocksDB should decrement the counter `unscheduled_flushes_` as soon as the bg
thread is scheduled. Before this fix, the counter is decremented only when the
bg thread starts and picks an element from the flush queue. This may cause more
than necessary bg threads to be scheduled. Not a correctness issue, but may
affect flush thread count.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6104

Test Plan:
```
make check
```

Differential Revision: D18735584

Pulled By: riversand963

fbshipit-source-id: d36272d4a08a494aeeab6200a3cff7a3d1a2dc10
2019-11-27 14:48:49 -08:00
Yi Wu
72de842ac9 Fix DBFlushTest::FireOnFlushCompletedAfterCommittedResult hang (#6018)
Summary:
The test would fire two flushes to let them run in parallel. Previously it wait for the first job to be scheduled before firing the second. It is possible the job is not started before the second job being scheduled, making the two job combine into one. Change to wait for the first job being started.

Fixes https://github.com/facebook/rocksdb/issues/6017
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6018

Test Plan:
```
while ./db_flush_test --gtest_filter=*FireOnFlushCompletedAfterCommittedResult*; do :; done
```
and let it run for a while.

Signed-off-by: Yi Wu <yiwu@pingcap.com>

Differential Revision: D18405576

Pulled By: riversand963

fbshipit-source-id: 6ebb6262e033d5dc2ef81cb3eb410b314f2de4c9
2019-11-08 13:47:29 -08:00
Yi Wu
1f9d7c0f54 Fix OnFlushCompleted fired before flush result write to MANIFEST (#5908)
Summary:
When there are concurrent flush job on the same CF, `OnFlushCompleted` can be called before the flush result being install to LSM. Fixing the issue by passing `FlushJobInfo` through `MemTable`, and the thread who commit the flush result can fetch the `FlushJobInfo` and fire `OnFlushCompleted` on behave of the thread actually writing the SST.

Fix https://github.com/facebook/rocksdb/issues/5892
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5908

Test Plan: Add new test. The test will fail without the fix.

Differential Revision: D17916144

Pulled By: riversand963

fbshipit-source-id: e18df67d9533b5baee52ae3605026cdeb05cbe10
2019-10-16 10:40:23 -07:00
Yanqin Jin
1e87f2b68b Ref and unref cfd before and after calling WaitForFlushMemTables (#5513)
Summary:
This is to prevent bg flush thread from unrefing and deleting the cfd that has been dropped by a concurrent thread.
Before RocksDB calls `DBImpl::WaitForFlushMemTables`, we should increase the refcount of each `ColumnFamilyData` so that its ref count will not drop to 0 even if the column family is dropped by another thread. Otherwise the bg flush thread can deref the cfd and deletes it, causing a segfault in `WaitForFlushMemtables` upon accessing `cfd`.

Test plan (on devserver):
```
$make clean && COMPILE_WITH_ASAN=1 make -j32
$make check
```
All unit tests must pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5513

Differential Revision: D16062898

Pulled By: riversand963

fbshipit-source-id: 37dc511f1dc99f036d0201bbd7f0a8f5677c763d
2019-07-01 14:12:02 -07:00
Siying Dong
e9e0101ca4 Move test related files under util/ to test_util/ (#5377)
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377

Differential Revision: D15551366

Pulled By: siying

fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
2019-05-30 11:25:51 -07:00
Vijay Nadimpalli
931c9df886 Use separate status code for column family drop and db shutdown in progress (#5275)
Summary:
Currently RocksDB uses Status::ShutdownInProgress to inform about column family drop. I would like to have a separate Status code for this event.
https://github.com/facebook/rocksdb/blob/master/include/rocksdb/status.h#L55
Comment on this:
abc4202e47/db/version_set.cc (L2742):L2743
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5275

Differential Revision: D15204583

Pulled By: vjnadimpalli

fbshipit-source-id: 95e99e34b27bc165b554ecb8a48a7f8e60f21e2a
2019-05-20 10:47:32 -07:00
Yanqin Jin
e626016545 Fix a race condition caused by unlocking db mutex (#5294)
Summary:
Previous code may call `~ColumnFamilyData` in `DBImpl::AtomicFlushMemTablesToOutputFiles` if the column family is dropped or `cfd->IsFlushPending() == false`. In `~ColumnFamilyData`, the db mutex is released briefly and re-acquired. This can cause correctness issue. The reason is as follows.

Assume there are more bg flush threads. After bg_flush_thr1 releases the db mutex, bg_flush_thr2 can grab it and pop an element from the flush queue. This will cause bg_flush_thr2 to accidentally pick some memtables which should have been picked by bg_flush_thr1. To make the matter worse, bg_flush_thr2 can clear `flush_requested_` flag for the memtable list, causing a subsequent call to `MemTableList::IsFlushPending()` by bg_flush_thr1 to return false, which is wrong.

The fix is to delay `ColumnFamilyData::Unref` and `~ColumnFamilyData` for column families not selected for flush until `AtomicFlushMemTablesToOutputFiles` returns. Furthermore, a bg flush thread should not clear `MemTableList::flush_requested_` in `MemTableList::PickMemtablesToFlush` unless atomic flush is not used **or** the memtable list does not have unpicked memtables.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5294

Differential Revision: D15295297

Pulled By: riversand963

fbshipit-source-id: 03b101205ca22c242647cbf488bcf0ed80b2ecbd
2019-05-10 17:56:48 -07:00
Yanqin Jin
35e6ba734e Fix a bug when trigger atomic flush and close db (#5254)
Summary:
With atomic flush, RocksDB background flush will flush memtables of a column family up to the largest memtable id in the immutable memtable list. This can introduce a bug in the following scenario. A user thread inserts into a column family until the memtable is full and triggers a flush. This will add the column family to flush_scheduler_. Then the user thread writes another record to the column family. In the PreprocessWrite function, the user thread picks the column family from flush_scheduler_ and schedules a flush request. The flush request gaurantees to flush all the memtables up to the current largest memtable ID of the immutable memtable list. Then the user thread writes new data to the newly-created active memtable. After the write returns, the user thread closes the db. This can cause assertion failure when the background flush thread tries to install superversion for the column family. The solution is to not install flush results if the db has already set `shutting_down_` to true.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5254

Differential Revision: D15124149

Pulled By: riversand963

fbshipit-source-id: 0a667a41339dedb5a18bcb01b0bf11c275c04df0
2019-04-29 12:48:32 -07:00
Yanqin Jin
4fce44fc8b Improve flushing multiple column families (#4708)
Summary:
If one column family is dropped, we should simply skip it and continue to flush
other active ones.
Currently we use Status::ShutdownInProgress to notify caller of column families
being dropped. In the future, we should consider using a different Status code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4708

Differential Revision: D13378954

Pulled By: riversand963

fbshipit-source-id: 42f248cdf2d32d4c0f677cd39012694b8f1328ca
2018-12-13 15:12:40 -08:00
Yanqin Jin
8d7bc76f36 Fix a flaky test DBFlushTest.SyncFail (#4633)
Summary:
There is a race condition in DBFlushTest.SyncFail, as illustrated below.
```
time         thread1                             bg_flush_thread
  |     Flush(wait=false, cfd)
  |     refs_before=cfd->current()->TEST_refs()   PickMemtable calls cfd->current()->Ref()
  V
```
The race condition between thread1 getting the ref count of cfd's current
version and bg_flush_thread incrementing the cfd's current version makes it
possible for later assertion on refs_before to fail. Therefore, we add test
sync points to enforce the order and assert on the ref count before and after
PickMemtable is called in bg_flush_thread.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4633

Differential Revision: D12967131

Pulled By: riversand963

fbshipit-source-id: a99d2bacb7869ec5d8d03b24ef2babc0e6ae1a3b
2018-11-29 13:39:56 -08:00
Yanqin Jin
147697420a Rollback memtable flush upon atomic flush fail (#4641)
Summary:
This fixes an assertion.

An atomic flush can have multiple flush jobs. Some of them may fail. If any of
them fails, we need to rollback all of them.
For the flush jobs that do fail, we already call `RollbackMemTableFlush` in
`FlushJob::Run`. The tricky part is for flush jobs that have completed
successfully. We need to call `RollbackMemTableFlush` for them as well.

The newly added DBAtomicFlushTest.AtomicFlushRollbackSomeJobs will SigAbort
without the corresponding change in AtomicFlushMemTablesToOutputFiles.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4641

Differential Revision: D12943649

Pulled By: riversand963

fbshipit-source-id: c66a4a664a1e0938e938fd41edc5a70c34cdd868
2018-11-14 20:54:17 -08:00
Soli
a478682260 Fix #3840: only SyncClosedLogs for multiple CFs (#4460)
Summary:
Call `SyncClosedLogs()` only if there are more than one column families.

Update several unit tests (in `fault_injection_test` and `db_flush_test`) correspondingly.

See #3840 for more info.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4460

Differential Revision: D12896377

Pulled By: riversand963

fbshipit-source-id: f49afdaec32568f12f001219a3aec1dfde3b32bf
2018-11-13 11:32:16 -08:00
Zhongyi Xie
61311157ff exclude get db property calls from rocksdb_lite (#4619)
Summary:
fix current failing lite test:
> In file included from ./util/testharness.h:15:0,
                 from ./table/mock_table.h:23,
                 from ./db/db_test_util.h:44,
                 from db/db_flush_test.cc:10:
db/db_flush_test.cc: In member function ‘virtual void rocksdb::DBFlushTest_ManualFlushFailsInReadOnlyMode_Test::TestBody()’:
db/db_flush_test.cc:250:35: error: ‘Properties’ is not a member of ‘rocksdb::DB’
   ASSERT_TRUE(db_->GetIntProperty(DB::Properties::kBackgroundErrors,
                                   ^
make: *** [db/db_flush_test.o] Error 1
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4619

Differential Revision: D12898319

Pulled By: miasantreble

fbshipit-source-id: 72de603b1f2e972fc8caa88611798c4e98e348c6
2018-11-02 11:28:59 -07:00
Andrew Kryczka
5c794d94c4 Prevent manual flush hanging in read-only mode (#4615)
Summary:
The logic to wait for stall conditions to clear before beginning a manual flush didn't take into account whether the DB was in read-only mode. In read-only mode the stall conditions would never clear since no background work is happening, so the wait would be never-ending. It's probably better to return an error to the user.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4615

Differential Revision: D12888008

Pulled By: ajkr

fbshipit-source-id: 1c474b42a7ac38d9fd0d0e2340ff1d53e684d83c
2018-11-01 15:27:06 -07:00
Yanqin Jin
5b4c709fad Enable atomic flush (#4023)
Summary:
Adds a DB option `atomic_flush` to control whether to enable this feature. This PR is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4023

Differential Revision: D8518381

Pulled By: riversand963

fbshipit-source-id: 1e3bb33e99bb102876a31b378d93b0138ff6634f
2018-10-26 15:08:43 -07:00
Maysam Yabandeh
21b51dfec4 Add inline comments to flush job (#4464)
Summary:
It also renames InstallMemtableFlushResults to MaybeInstallMemtableFlushResults to clarify its contract.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4464

Differential Revision: D10224918

Pulled By: maysamyabandeh

fbshipit-source-id: 04e3f2d8542002cb9f8010cb436f5152751b3cbe
2018-10-05 15:41:17 -07:00
Mikhail Antonov
927f274939 Avoiding write stall caused by manual flushes (#4297)
Summary:
Basically at the moment it seems it's possible to cause write stall by calling flush (either manually vis DB::Flush(), or from Backup Engine directly calling FlushMemTable() while background flush may be already happening.

One of the ways to fix it is that in DBImpl::CompactRange() we already check for possible stall and delay flush if needed before we actually proceed to call FlushMemTable(). We can simply move this delay logic to separate method and call it from FlushMemTable.

This is draft patch, for first look; need to check tests/update SyncPoints and most certainly would need to add allow_write_stall method to FlushOptions().
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4297

Differential Revision: D9420705

Pulled By: mikhail-antonov

fbshipit-source-id: f81d206b55e1d7b39e4dc64242fdfbceeea03fcc
2018-08-29 12:12:55 -07:00
Sagar Vemuri
f3801528c1 Disable DBFlushTest.SyncFail and DBTest.GroupCommitTest on Travis (#4154)
Summary:
I am temporarily disabling DBFlushTest.SyncFail and DBTest.GroupCommitTest tests on Travis until we figure out the root-cause. These tests will still continue to run locally though.
I haven't been able to reproduce these failures locally so far (even on a [local Travis environment](https://docs.travis-ci.com/user/common-build-problems/#Troubleshooting-Locally-in-a-Docker-Image) ).

These tests  are failing way too frequently causing everyone to wonder why their PR failed on travis, and waste time in debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4154

Differential Revision: D8907258

Pulled By: sagar0

fbshipit-source-id: f40068b16e9245fb3791b6a4796435d1ce1ed205
2018-07-18 18:43:11 -07:00
Siying Dong
d59549298f Skip deleted WALs during recovery
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.

Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)

This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765

Differential Revision: D7747618

Pulled By: siying

fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
2018-05-03 15:43:09 -07:00
Siying Dong
d5afa73789 Revert "Skip deleted WALs during recovery"
Summary:
This reverts commit 73f21a7b21.

It breaks compatibility. When created a DB using a build with this new change, opening the DB and reading the data will fail with this error:

"Corruption: Can't access /000000.sst: IO error: while stat a file for size: /tmp/xxxx/000000.sst: No such file or directory"

This is because the dummy AddFile4 entry generated by the new code will be treated as a real entry by an older build. The older build will think there is a real file with number 0, but there isn't such a file.
Closes https://github.com/facebook/rocksdb/pull/3762

Differential Revision: D7730035

Pulled By: siying

fbshipit-source-id: f2051859eff20ef1837575ecb1e1bb96b3751e77
2018-04-23 12:01:26 -07:00
David Lai
3be9b36453 comment unused parameters to turn on -Wunused-parameter flag
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662

Differential Revision: D7426121

Pulled By: Dayvedde

fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
2018-04-12 17:59:16 -07:00
Maysam Yabandeh
73f21a7b21 Skip deleted WALs during recovery
Summary:
This patch record the deleted WAL numbers in the manifest to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Closes https://github.com/facebook/rocksdb/pull/3488

Differential Revision: D6967893

Pulled By: maysamyabandeh

fbshipit-source-id: 13119feb155a08ab6d4909f437c7a750480dc8a1
2018-03-30 11:28:05 -07:00
Anand Ananthabhotla
4b124fb9d3 Handle error return from WriteBuffer()
Summary:
There are a couple of places where we swallow any error from
WriteBuffer() - in SwitchMemtable() and DBImpl::CloseImpl(). Propagate
the error up in those cases rather than ignoring it.
Closes https://github.com/facebook/rocksdb/pull/3404

Differential Revision: D6879954

Pulled By: anand1976

fbshipit-source-id: 2ef88b554be5286b0a8bad7384ba17a105395bdb
2018-02-05 13:59:34 -08:00
Yi Wu
4bdf06e78f Fix DBFlushTest::ManualFlushWithMinWriteBufferNumberToMerge dead lock
Summary:
In the test, there can be a dead lock between background flush thread and foreground main thread as following:
* background flush thread:
  - holding db mutex, while
  - waiting on "DBImpl::FlushMemTableToOutputFile:BeforeInstallSV" sync point.
* foreground thread:
  - waiting for db mutex to write "key2"

Fixing by let background flush thread wait without holding db mutex.
Closes https://github.com/facebook/rocksdb/pull/3436

Differential Revision: D6841334

Pulled By: yiwu-arbug

fbshipit-source-id: b020768ac94e166e40953c5d09e505515a5f244d
2018-01-29 18:56:47 -08:00