Commit Graph

26 Commits

Author SHA1 Message Date
Maysam Yabandeh
88d8b2a2f5 WritePrepared Txn: Duplicate Keys, Txn Part
Summary:
This patch takes advantage of memtable being able to detect duplicate <key,seq> and returning TryAgain to handle duplicate keys in WritePrepared Txns. Through WriteBatchWithIndex's index it detects existence of at least a duplicate key in the write batch. If duplicate key was reported, it then pays the cost of counting the number of sub-patches by iterating over the write batch and pass it to DBImpl::Write. DB will make use of the provided batch_count to assign proper sequence numbers before sending them to the WAL. When later inserting the batch to the memtable, it increases the seq each time memtbale reports a duplicate (a sub-patch in our counting) and tries again.
Closes https://github.com/facebook/rocksdb/pull/3455

Differential Revision: D6873699

Pulled By: maysamyabandeh

fbshipit-source-id: db8487526c3a5dc1ddda0ea49f0f979b26ae648d
2018-02-05 18:43:24 -08:00
Maysam Yabandeh
18dcf7f98d WritePrepared Txn: PreReleaseCallback
Summary:
Add PreReleaseCallback to be called at the end of WriteImpl but before publishing the sequence number. The callback is used in WritePrepareTxn to i) update the commit map, ii) update the last published sequence number in the 2nd write queue. It also ensures that all the commits will go to the 2nd queue.
These changes will ensure that the commit map is updated before the sequence number is published and used by reading snapshots. If we use two write queues, the snapshots will use the seq number published by the 2nd queue. If we use one write queue (the default, the snapshots will use the last seq number in the memtable, which also indicates the last published seq number.
Closes https://github.com/facebook/rocksdb/pull/3205

Differential Revision: D6438959

Pulled By: maysamyabandeh

fbshipit-source-id: f8b6c434e94bc5f5ab9cb696879d4c23e2577ab9
2017-11-30 23:50:45 -08:00
Maysam Yabandeh
385049baf2 WritePrepared Txn: Recovery
Summary:
Recover txns from the WAL. Also added some unit tests.
Closes https://github.com/facebook/rocksdb/pull/2901

Differential Revision: D5859596

Pulled By: maysamyabandeh

fbshipit-source-id: 6424967b231388093b4effffe0a3b1b7ec8caeb0
2017-09-28 16:56:45 -07:00
jimmyway
23c7d13540 fix comment
Summary:
Signed-off-by: tang.jin <tang.jin@istuary.com>
Closes https://github.com/facebook/rocksdb/pull/2644

Differential Revision: D5600861

Pulled By: yiwu-arbug

fbshipit-source-id: 9516636cb6e77b09fe0ebef78953adf4b7e88cc8
2017-08-09 22:57:01 -07:00
Siying Dong
3c327ac2d0 Change RocksDB License
Summary: Closes https://github.com/facebook/rocksdb/pull/2589

Differential Revision: D5431502

Pulled By: siying

fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75
2017-07-15 16:11:23 -07:00
Yi Wu
07bdcb91fe New WriteImpl to pipeline WAL/memtable write
Summary:
PipelineWriteImpl is an alternative approach to WriteImpl. In WriteImpl, only one thread is allow to write at the same time. This thread will do both WAL and memtable writes for all write threads in the write group. Pending writers wait in queue until the current writer finishes. In the pipeline write approach, two queue is maintained: one WAL writer queue and one memtable writer queue. All writers (regardless of whether they need to write WAL) will still need to first join the WAL writer queue, and after the house keeping work and WAL writing, they will need to join memtable writer queue if needed. The benefit of this approach is that
1. Writers without memtable writes (e.g. the prepare phase of two phase commit) can exit write thread once WAL write is finish. They don't need to wait for memtable writes in case of group commit.
2. Pending writers only need to wait for previous WAL writer finish to be able to join the write thread, instead of wait also for previous memtable writes.

Merging #2056 and #2058 into this PR.
Closes https://github.com/facebook/rocksdb/pull/2286

Differential Revision: D5054606

Pulled By: yiwu-arbug

fbshipit-source-id: ee5b11efd19d3e39d6b7210937b11cefdd4d1c8d
2017-05-19 14:26:42 -07:00
Siying Dong
d616ebea23 Add GPLv2 as an alternative license.
Summary: Closes https://github.com/facebook/rocksdb/pull/2226

Differential Revision: D4967547

Pulled By: siying

fbshipit-source-id: dd3b58ae1e7a106ab6bb6f37ab5c88575b125ab4
2017-04-27 18:06:12 -07:00
Yi Wu
e9e6e53247 Simplify write thread logic
Summary:
The concept about early exit in write thread implementation is a confusing one. It means that if early exit is allowed, batch group leader will not responsible to exit the batch group, but the last finished writer do. In case we need to mark log synced, or encounter memtable insert error, early exit is disallowed.

This patch remove such a concept by:
* In all cases, the last finished writer (not necessary leader) is responsible to exit batch group.
* In case of parallel memtable write, leader will also mark log synced after memtable insert and before signal finish (call `CompleteParallelWorker()`). The purpose is to allow mark log synced (which require locking mutex) can run in parallel to memtable insert in other writers.
* The last finish writer should handle memtable insert error (update bg_error_) before exiting batch group.
Closes https://github.com/facebook/rocksdb/pull/2134

Differential Revision: D4869667

Pulled By: yiwu-arbug

fbshipit-source-id: aec170847c85b90f4179d6a4608a4fe1361544e3
2017-04-13 16:12:04 -07:00
Maysam Yabandeh
20778f2f92 Adding comments to the write path
Summary:
also did minor refactoring
Closes https://github.com/facebook/rocksdb/pull/2115

Differential Revision: D4855818

Pulled By: maysamyabandeh

fbshipit-source-id: fbca6ac57e5c6677fffe8354f7291e596a50cb77
2017-04-10 12:43:34 -07:00
Siying Dong
d2dce5611a Move some files under util/ to separate dirs
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090

Differential Revision: D4833681

Pulled By: siying

fbshipit-source-id: 2fd8bef
2017-04-05 19:09:16 -07:00
Yi Wu
9e44531803 Refactor WriteImpl (pipeline write part 1)
Summary:
Refactor WriteImpl() so when I plug-in the pipeline write code (which is
an alternative approach for WriteThread), some of the logic can be
reuse. I split out the following methods from WriteImpl():

* PreprocessWrite()
* HandleWALFull() (previous MaybeFlushColumnFamilies())
* HandleWriteBufferFull()
* WriteToWAL()

Also adding a constructor to WriteThread::Writer, and move WriteContext into db_impl.h.
No real logic change in this patch.
Closes https://github.com/facebook/rocksdb/pull/2042

Differential Revision: D4781014

Pulled By: yiwu-arbug

fbshipit-source-id: d45ca18
2017-04-04 10:24:32 -07:00
Maysam Yabandeh
182b940e70 Add WriteOptions.no_slowdown
Summary:
If the WriteOptions.no_slowdown flag is set AND we need to wait or sleep for
the write request, then fail immediately with Status::Incomplete().
Closes https://github.com/facebook/rocksdb/pull/1527

Differential Revision: D4191405

Pulled By: maysamyabandeh

fbshipit-source-id: 7f3ce3f
2016-11-21 18:09:13 -08:00
charsyam
4f2b0946d1 fix simple typos (#1183) 2016-06-25 08:29:40 +01:00
Reid Horuff
1b8a2e8fdd [rocksdb] Memtable Log Referencing and Prepared Batch Recovery
Summary:
This diff is built on top of WriteBatch modification: https://reviews.facebook.net/D54093 and adds the required functionality to rocksdb core necessary for rocksdb to support 2PC.

modfication of DBImpl::WriteImpl()
- added two arguments *uint64_t log_used = nullptr, uint64_t log_ref = 0;
- *log_used is an output argument which will return the log number which the incoming batch was inserted into, 0 if no WAL insert took place.
-  log_ref is a supplied log_number which all memtables inserted into will reference after the batch insert takes place. This number will reside in 'FindMinPrepLogReferencedByMemTable()' until all Memtables insertinto have flushed.

- Recovery/writepath is now aware of prepared batches and commit and rollback markers.

Test Plan: There is currently no test on this diff. All testing of this functionality takes place in the Transaction layer/diff but I will add some testing.

Reviewers: IslamAbdelRahman, sdong

Subscribers: leveldb, santoshb, andrewkr, vasilep, dhruba, hermanlee4

Differential Revision: https://reviews.facebook.net/D56919
2016-05-10 14:06:07 -07:00
Baraa Hamodi
21e95811d1 Updated all copyright headers to the new format. 2016-02-09 15:12:00 -08:00
reid horuff
6f71d3b68b Improve perf of Pessimistic Transaction expirations (and optimistic transactions)
Summary:
copy from task 8196669:

1) Optimistic transactions do not support batching writes from different threads.
2) Pessimistic transactions do not support batching writes if an expiration time is set.

In these 2 cases, we currently do not do any write batching in DBImpl::WriteImpl() because there is a WriteCallback that could decide at the last minute to abort the write.  But we could support batching write operations with callbacks if we make sure to process the callbacks correctly.

To do this, we would first need to modify write_thread.cc to stop preventing writes with callbacks from being batched together.  Then we would need to change DBImpl::WriteImpl() to call all WriteCallback's in a batch, only write the batches that succeed, and correctly set the state of each batch's WriteThread::Writer.

Test Plan: Added test WriteWithCallbackTest to write_callback_test.cc which creates multiple client threads and verifies that writes are batched and executed properly.

Reviewers: hermanlee4, anthony, ngbronson

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D52863
2016-02-05 10:44:13 -08:00
Nathan Bronson
ac16663bd6 use -Werror=missing-field-initializers, to closer match MyRocks build
Summary:
myrocks seems to build rocksdb using
-Wmissing-field-initializers (and treats warnings as errors).  This diff
adds that flag to the rocksdb build, and fixes the compilation failures
that result.  I have not checked for any other differences in the build
flags for rocksdb build as part of myrocks.

Test Plan: make check

Reviewers: sdong, rven

Reviewed By: rven

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D52443
2015-12-30 14:56:18 -08:00
Nathan Bronson
7d87f02799 support for concurrent adds to memtable
Summary:
This diff adds support for concurrent adds to the skiplist memtable
implementations.  Memory allocation is made thread-safe by the addition of
a spinlock, with small per-core buffers to avoid contention.  Concurrent
memtable writes are made via an additional method and don't impose a
performance overhead on the non-concurrent case, so parallelism can be
selected on a per-batch basis.

Write thread synchronization is an increasing bottleneck for higher levels
of concurrency, so this diff adds --enable_write_thread_adaptive_yield
(default off).  This feature causes threads joining a write batch
group to spin for a short time (default 100 usec) using sched_yield,
rather than going to sleep on a mutex.  If the timing of the yield calls
indicates that another thread has actually run during the yield then
spinning is avoided.  This option improves performance for concurrent
situations even without parallel adds, although it has the potential to
increase CPU usage (and the heuristic adaptation is not yet mature).

Parallel writes are not currently compatible with
inplace updates, update callbacks, or delete filtering.
Enable it with --allow_concurrent_memtable_write (and
--enable_write_thread_adaptive_yield).  Parallel memtable writes
are performance neutral when there is no actual parallelism, and in
my experiments (SSD server-class Linux and varying contention and key
sizes for fillrandom) they are always a performance win when there is
more than one thread.

Statistics are updated earlier in the write path, dropping the number
of DB mutex acquisitions from 2 to 1 for almost all cases.

This diff was motivated and inspired by Yahoo's cLSM work.  It is more
conservative than cLSM: RocksDB's write batch group leader role is
preserved (along with all of the existing flush and write throttling
logic) and concurrent writers are blocked until all memtable insertions
have completed and the sequence number has been advanced, to preserve
linearizability.

My test config is "db_bench -benchmarks=fillrandom -threads=$T
-batch_size=1 -memtablerep=skip_list -value_size=100 --num=1000000/$T
-level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999
-disable_auto_compactions --max_write_buffer_number=8
-max_background_flushes=8 --disable_wal --write_buffer_size=160000000
--block_size=16384 --allow_concurrent_memtable_write" on a two-socket
Xeon E5-2660 @ 2.2Ghz with lots of memory and an SSD hard drive.  With 1
thread I get ~440Kops/sec.  Peak performance for 1 socket (numactl
-N1) is slightly more than 1Mops/sec, at 16 threads.  Peak performance
across both sockets happens at 30 threads, and is ~900Kops/sec, although
with fewer threads there is less performance loss when the system has
background work.

Test Plan:
1. concurrent stress tests for InlineSkipList and DynamicBloom
2. make clean; make check
3. make clean; DISABLE_JEMALLOC=1 make valgrind_check; valgrind db_bench
4. make clean; COMPILE_WITH_TSAN=1 make all check; db_bench
5. make clean; COMPILE_WITH_ASAN=1 make all check; db_bench
6. make clean; OPT=-DROCKSDB_LITE make check
7. verify no perf regressions when disabled

Reviewers: igor, sdong

Reviewed By: sdong

Subscribers: MarkCallaghan, IslamAbdelRahman, anthony, yhchiang, rven, sdong, guyg8, kradhakrishnan, dhruba

Differential Revision: https://reviews.facebook.net/D50589
2015-12-25 11:03:40 -08:00
Nathan Bronson
b7198c3afe reduce db mutex contention for write batch groups
Summary:
This diff allows a Writer to join the next write batch group
without acquiring any locks. Waiting is performed via a per-Writer mutex,
so all of the non-leader writers never need to acquire the db mutex.
It is now possible to join a write batch group after the leader has been
chosen but before the batch has been constructed. This diff doesn't
increase parallelism, but reduces synchronization overheads.

For some CPU-bound workloads (no WAL, RAM-sized working set) this can
substantially reduce contention on the db mutex in a multi-threaded
environment.  With T=8 N=500000 in a CPU-bound scenario (see the test
plan) this is good for a 33% perf win.  Not all scenarios see such a
win, but none show a loss.  This code is slightly faster even for the
single-threaded case (about 2% for the CPU-bound scenario below).

Test Plan:
1. unit tests
2. COMPILE_WITH_TSAN=1 make check
3. stress high-contention scenarios with db_bench -benchmarks=fillrandom -threads=$T -batch_size=1 -memtablerep=skip_list -value_size=0 --num=$N -level0_slowdown_writes_trigger=9999 -level0_stop_writes_trigger=9999 -disable_auto_compactions --max_write_buffer_number=8 -max_background_flushes=8 --disable_wal --write_buffer_size=160000000

Reviewers: sdong, igor, rven, ljin, yhchiang

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D43887
2015-08-14 10:55:43 -07:00
Igor Canadi
5aea98ddd8 Deprecate WriteOptions::timeout_hint_us
Summary:
In one of our recent meetings, we discussed deprecating features that are not being actively used. One of those features, at least within Facebook, is timeout_hint. The feature is really nicely implemented, but if nobody needs it, we should remove it from our code-base (until we get a valid use-case). Some arguments:
* Less code == better icache hit rate, smaller builds, simpler code
* The motivation for adding timeout_hint_us was to work-around RocksDB's stall issue. However, we're currently addressing the stall issue itself (see @sdong's recent work on stall write_rate), so we should never see sharp lock-ups in the future.
* Nobody is using the feature within Facebook's code-base. Googling for `timeout_hint_us` also doesn't yield any users.

Test Plan: make check

Reviewers: anthony, kradhakrishnan, sdong, yhchiang

Reviewed By: yhchiang

Subscribers: sdong, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D41937
2015-07-14 09:35:48 +02:00
sdong
76d3cd3286 Fix public API dependency on internal codes and dependency on MAX_INT32
Summary:
Public API depends on port/port.h which is wrong. Fix it.
Also with gcc 4.8.1 build was broken as MAX_INT32 was not recognized. Fix it by using ::max in linux.

Test Plan: Build it and try to build an external project on top of it.

Reviewers: anthony, yhchiang, kradhakrishnan, igor

Reviewed By: igor

Subscribers: yoshinorim, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D41745
2015-07-11 10:32:11 -07:00
Dmitri Smirnov
18285c1e2f Windows Port from Microsoft
Summary: Make RocksDb build and run on Windows to be functionally
 complete and performant. All existing test cases run with no
 regressions. Performance numbers are in the pull-request.

 Test plan: make all of the existing unit tests pass, obtain perf numbers.

 Co-authored-by: Praveen Rao praveensinghrao@outlook.com
 Co-authored-by: Sherlock Huang baihan.huang@gmail.com
 Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
 Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
2015-07-01 16:13:56 -07:00
sdong
7842920be5 Slow down writes by bytes written
Summary:
We slow down data into the database to the rate of options.delayed_write_rate (a new option) with this patch.

The thread synchronization approach I take is to still synchronize write controller by DB mutex and GetDelay() is inside DB mutex. Try to minimize the frequency of getting time in GetDelay(). I verified it through db_bench and it seems to work

hard_rate_limit is deprecated.

options.delayed_write_rate is still not dynamically changeable. Need to work on it as a follow-up.

Test Plan: Add new unit tests in db_test

Reviewers: yhchiang, rven, kradhakrishnan, anthony, MarkCallaghan, igor

Reviewed By: igor

Subscribers: ikabiljo, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D36351
2015-06-11 20:42:18 -07:00
agiardullo
dc9d70de65 Optimistic Transactions
Summary: Optimistic transactions supporting begin/commit/rollback semantics.  Currently relies on checking the memtable to determine if there are any collisions at commit time.  Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty.  You should probably start with transaction.h to get an overview of what is currently supported.

Test Plan: Added a new test, but still need to look into stress testing.

Reviewers: yhchiang, igor, rven, sdong

Reviewed By: sdong

Subscribers: adamretter, MarkCallaghan, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D33435
2015-05-29 14:36:35 -07:00
Yueh-Hsuan Chiang
181191a1e4 Add a counter for collecting the wait time on db mutex.
Summary:
Add a counter for collecting the wait time on db mutex.
Also add MutexWrapper and CondVarWrapper for measuring wait time.

Test Plan:
./db_test
export ROCKSDB_TESTS=MutexWaitStats
./db_test

verify stats output using db_bench
make clean
make release
./db_bench --statistics=1 --benchmarks=fillseq,readwhilewriting --num=10000 --threads=10

Sample output:
    rocksdb.db.mutex.wait.micros COUNT : 7546866

Reviewers: MarkCallaghan, rven, sdong, igor

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D32787
2015-02-04 21:39:45 -08:00
Igor Canadi
dee91c259d WriteThread
Summary: This diff just moves the write thread control out of the DBImpl. I will need this as I will control column family data concurrency by only accessing some data in the write thread. That way, we won't have to lock our accesses to column family hash table (mappings from IDs to CFDs).

Test Plan: make check

Reviewers: sdong, yhchiang, ljin

Reviewed By: ljin

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D23301
2014-09-12 16:23:58 -07:00