Summary:
Pessimistic Transaction expiration time checking currently causes a performace regression, Lets disable it in db_bench by default.
Also, in order to be able to better tune how much contention we're simulating, added new optinos to set lock timeout and snapshot.
Test Plan: run db_bench randomtranansaction
Reviewers: sdong, igor, yhchiang, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45831
Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary:
Add argument --show_table_properties to db_bench
-show_table_properties (If true, then per-level table properties will be
printed on every stats-interval when stats_interval is set and
stats_per_interval is on.) type: bool default: false
Test Plan:
./db_bench --show_table_properties=1 --stats_interval=100000 --stats_per_interval=1
./db_bench --show_table_properties=1 --stats_interval=100000 --stats_per_interval=1 --num_column_families=2
Sample Output:
Compaction Stats [column_family_name_000001]
Level Files Size(MB) Score Read(GB) Rn(GB) Rnp1(GB) Write(GB) Wnew(GB) Moved(GB) W-Amp Rd(MB/s) Wr(MB/s) Comp(sec) Comp(cnt) Avg(sec) Stall(cnt) KeyIn KeyDrop
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
L0 3/0 5 0.8 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 86.3 0 17 0.021 0 0 0
L1 5/0 9 0.9 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.000 0 0 0
L2 9/0 16 0.2 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0 0.000 0 0 0
Sum 17/0 31 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.0 0.0 86.3 0 17 0.021 0 0 0
Int 0/0 0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 1.0 0.0 83.9 0 2 0.022 0 0 0
Flush(GB): cumulative 0.030, interval 0.004
Stalls(count): 0 level0_slowdown, 0 level0_numfiles, 0 memtable_compaction, 0 leveln_slowdown_soft, 0 leveln_slowdown_hard
Level[0]: # data blocks=2571; # entries=84813; raw key size=2035512; raw average key size=24.000000; raw value size=8481300; raw average value size=100.000000; data block size=5690119; index block size=82415; filter block size=0; (estimated) table size=5772534; filter policy name=N/A;
Level[1]: # data blocks=4285; # entries=141355; raw key size=3392520; raw average key size=24.000000; raw value size=14135500; raw average value size=100.000000; data block size=9487353; index block size=137377; filter block size=0; (estimated) table size=9624730; filter policy name=N/A;
Level[2]: # data blocks=7713; # entries=254439; raw key size=6106536; raw average key size=24.000000; raw value size=25443900; raw average value size=100.000000; data block size=17077893; index block size=247269; filter block size=0; (estimated) table size=17325162; filter policy name=N/A;
Level[3]: # data blocks=0; # entries=0; raw key size=0; raw average key size=0.000000; raw value size=0; raw average value size=0.000000; data block size=0; index block size=0; filter block size=0; (estimated) table size=0; filter policy name=N/A;
Level[4]: # data blocks=0; # entries=0; raw key size=0; raw average key size=0.000000; raw value size=0; raw average value size=0.000000; data block size=0; index block size=0; filter block size=0; (estimated) table size=0; filter policy name=N/A;
Level[5]: # data blocks=0; # entries=0; raw key size=0; raw average key size=0.000000; raw value size=0; raw average value size=0.000000; data block size=0; index block size=0; filter block size=0; (estimated) table size=0; filter policy name=N/A;
Level[6]: # data blocks=0; # entries=0; raw key size=0; raw average key size=0.000000; raw value size=0; raw average value size=0.000000; data block size=0; index block size=0; filter block size=0; (estimated) table size=0; filter policy name=N/A;
Reviewers: anthony, IslamAbdelRahman, MarkCallaghan, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45651
Summary:
ReadaheadRandomAccessFile acts as a transparent layer on top of RandomAccessFile. When a Read() request is issued, it issues a much bigger request to the OS and caches the result. When a new request comes in and we already have the data cached, it doesn't have to issue any requests to the OS.
We add ReadaheadRandomAccessFile layer only when file is read during compactions.
D45105 was incorrectly closed by Phabricator because I committed it to a separate branch (not master), so I'm resubmitting the diff.
Test Plan: make check
Reviewers: MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45123
Summary:
This patch fixes a race condition in DBTEst.DynamicMemtableOptions. In rare cases,
it was possible that the main thread would fill up both memtables before the flush
job acquired its work. Then, the flush job was flushing both memtables together,
producing only one L0 file while the test expected two. Now, the test waits for
flushes to finish earlier, to make sure that the memtables are flushed in separate
flush jobs.
Test Plan:
Insert "usleep(10000);" after "IOSTATS_SET_THREAD_POOL_ID(Env::Priority::HIGH);" in BGWorkFlush()
to make the issue more likely. Then test with:
make db_test && time while ./db_test --gtest_filter=*DynamicMemtableOptions; do true; done
Reviewers: rven, sdong, yhchiang, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45429
Summary:
Up until this point we had DbOptions.num_subcompactions, but
it is semantically more correct to call this max_subcompactions since
we will schedule *up to* DbOptions.max_subcompactions smaller compactions
at a time during a compaction job.
I also added a --subcompactions option to db_bench
Test Plan: make all make check
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45069
Summary:
Add options.compaction_measure_io_stats to print out / pass to listener accumulated time spent on write calls. Example outputs in info logs:
2015/08/12-16:27:59.463944 7fd428bff700 (Original Log Time 2015/08/12-16:27:59.463922) EVENT_LOG_v1 {"time_micros": 1439422079463897, "job": 6, "event": "compaction_finished", "output_level": 1, "num_output_files": 4, "total_output_size": 6900525, "num_input_records": 111483, "num_output_records": 106877, "file_write_nanos": 15663206, "file_range_sync_nanos": 649588, "file_fsync_nanos": 349614797, "file_prepare_write_nanos": 1505812, "lsm_state": [2, 4, 0, 0, 0, 0, 0]}
Add two more counters in iostats_context.
Also add a parameter of db_bench.
Test Plan: Add a unit test. Also manually verify LOG outputs in db_bench
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44115
Summary:
Initial implementation of Pessimistic Transactions. This diff contains the api changes discussed in D38913. This diff is pretty large, so let me know if people would prefer to meet up to discuss it.
MyRocks folks: please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.
Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint(). After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex. We can then decide which route is preferable.
Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.
Test Plan: Unit tests, db_bench parallel testing.
Reviewers: igor, rven, sdong, yhchiang, yoshinorim
Reviewed By: sdong
Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40869
Summary:
While working on single delete support for db_bench, I realized that
db_bench/db_stress contain a bunch of duplicate code related to
copmression and found some typos. This patch removes duplicate code,
typos and a redundant #ifndef in internal_stats.cc.
Test Plan: make db_stress && make db_bench && ./db_bench --benchmarks=compress,uncompress
Reviewers: yhchiang, sdong, rven, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43965
Summary: Now we allow trivial move in universal compaction. Add a parameter in db_bench
Test Plan: Run db_bench with this option on and off and make sure the option is switched correctly.
Reviewers: yhchiang, igor, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41427
Summary:
Remove --help entry for readhot.
Update read_random_exp_range flag description: The distribution is num *
exp(-r), not num * exp(r).
Test Plan: Run ./db_bench --help
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D42303
Summary: This helps Windows port to format their changes, as discussed. Might have formatted some other codes too becasue last 10 commits include more.
Test Plan: Build it.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41961
Summary:
The new flag --cache_index_and_filter_blocks sets
BlockBasedTableOptions.cache_index_and_filter_blocks
Test Plan: make db_bench. Working on benchmarks with the new flag.
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D41481
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary:
Implementation of a table-level row cache.
It only caches point queries done through the `DB::Get` interface, queries done through the `Iterator` interface will completely skip the cache.
Supports snapshots and merge operations.
Test Plan: Ran `make valgrind_check commit-prereq`
Reviewers: igor, philipp, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39849
Summary:
So far, we benchmarked RocksDB by writing as fast as possible. With this change, we're able to limit our write throughput, which should help us better understand how RocksDB performes under varying write workloads.
Specifically, I'm currently interested in the shape of the graph that has write throughput on one axis and write rate on another. This should help us with designing our stall system, as we have started to do with D36351.
Test Plan:
$ ./db_bench --benchmarks=fillrandom --benchmark_write_rate_limit=1000000
fillrandom : 118.523 micros/op 8437 ops/sec; 0.9 MB/s
$ ./db_bench --benchmarks=fillrandom --benchmark_write_rate_limit=2000000
fillrandom : 59.136 micros/op 16910 ops/sec; 1.9 MB/s
Reviewers: MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39759
Summary:
This diff update DB::CompactRange to use RangeCompactionOptions instead of using multiple parameters
Old CompactRange is still available but deprecated
Test Plan:
make all check
make rocksdbjava
USE_CLANG=1 make all
OPT=-DROCKSDB_LITE make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40209
Summary:
This is part of an effort to better understand and optimize RocksDB stalls under high load. I added a feature to db_bench to periodically write QPS to CSV files. That way we can nicely see how our QPS changes in time (especially when DB is stalled) and can do a better job of evaluating our stall system (i.e. we want the QPS to be as constant as possible, as opposed to having bunch of stalls)
Cool part of CSV files is that we can easily graph them -- there are a bunch of tools available.
Test Plan:
Ran ./db_bench --report_interval_seconds=10 --benchmarks=fillrandom --num=10000000
and observed this in report.csv:
secs_elapsed,interval_qps
10,2725860
20,1980480
30,1863456
40,1454359
50,1460389
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40047
Summary:
We slow down data into the database to the rate of options.delayed_write_rate (a new option) with this patch.
The thread synchronization approach I take is to still synchronize write controller by DB mutex and GetDelay() is inside DB mutex. Try to minimize the frequency of getting time in GetDelay(). I verified it through db_bench and it seems to work
hard_rate_limit is deprecated.
options.delayed_write_rate is still not dynamically changeable. Need to work on it as a follow-up.
Test Plan: Add new unit tests in db_test
Reviewers: yhchiang, rven, kradhakrishnan, anthony, MarkCallaghan, igor
Reviewed By: igor
Subscribers: ikabiljo, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36351
Summary: Some test and benchmark codes don't build for CYGWIN. Fix it.
Test Plan: Build "make all" with TARGET_OS=Cygwin on cygwin and make sure it passes.
Reviewers: rven, yhchiang, anthony, igor, kradhakrishnan
Reviewed By: igor, kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39711
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.
After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.
This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).
However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.
Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here.
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37443
Summary:
This turns out to be pretty bad because if we prioritize L0->L1 then L1 can grow artificially large, which makes L0->L1 more and more expensive. For example:
256MB @ L0 + 256MB @ L1 --> 512MB @ L1
256MB @ L0 + 512MB @ L1 --> 768MB @ L1
256MB @ L0 + 768MB @ L1 --> 1GB @ L1
....
256MB @ L0 + 10GB @ L1 --> 10.2GB @ L1
At some point we need to start compacting L1->L2 to speed up L0->L1.
Test Plan:
The performance improvement is massive for heavy write workload. This is the benchmark I ran: https://phabricator.fb.com/P19842671. Before this change, the benchmark took 47 minutes to complete. After, the benchmark finished in 2minutes. You can see full results here: https://phabricator.fb.com/P19842674
Also, we ran this diff on MongoDB on RocksDB on one replicaset. Before the change, our initial sync was so slow that it couldn't keep up with primary writes. After the change, the import finished without any issues
Reviewers: dynamike, MarkCallaghan, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38637
Summary:
See https://gist.github.com/mdcallag/89ebb2b8cbd331854865 for the IO stats.
I added "Cumulative compaction:" and "Interval compaction:" lines. The IO rates
can be confusing. Rates fro per-level stats lines, Wr(MB/s) & Rd(MB/s), are computed
using the duration of the compaction job. If the job reads 10MB, writes 9MB and the job
(IO & merging) takes 1 second then the rates are 10MB/s for read and 9MB/s for writes.
The IO rates in the Cumulative compaction line uses the total uptime. The IO rates in the
Interval compaction line uses the interval uptime. So these Cumalative & Interval
compaction IO rates cannot be compared to the per-level IO rates. But both forms of
the rates are useful for debugging perf.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D38667
Summary: Add --rate_limiter_bytes_per_sec to db_bench to allow rater limit to disk
Test Plan:
Run
./db_bench --benchmarks=fillseq --num=30000000 --rate_limiter_bytes_per_sec=3000000 --num_multi_db=8 -disable_wal
And see io_stats to have the rate limited.
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D38385
Summary:
The default, use one iter for the whole test, isn't good. This cost me
a few hours of debugging and a few days of tessting. For readonly
that isn't realistic and for read-write that keeps a lot of old sst files around.
I remove the option because nothing uses it and not calling gettimeofday per
loop iteration adds about 3% to QPS at 20 threads.
Task ID: #
Blame Rev:
Test Plan:
run db_bench
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37965
Summary:
This fixes two problems:
1) the env should not be created twice when use_existing_db is false
2) the env dtor should run before cachedev_fd_ is closed.
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36795
Summary:
There are some cases when flachcache file descriptor was
already allocated (i.e. fb-MySQL). Then NewFlashcacheAwareEnv returns an
error at open() because fd was already assigned. This diff adds another
function to instantiate FlashcacheAwareEnv, with pre-allocated fd cachedev_fd.
Test Plan: Tested with MyRocks using this function, then worked
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, MarkCallaghan, rven
Differential Revision: https://reviews.facebook.net/D36447
Summary:
The --stats_interval_seconds determines interval for stats reporting
and overrides --stats_interval when set. I also changed tools/benchmark.sh
to report stats every 60 seconds so I can avoid trying to figure out a
good value for --stats_interval per test and per storage device.
Task ID: #6631621
Blame Rev:
Test Plan:
run tools/run_flash_bench, look at output
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36189
Summary:
This makes run_flash_bench.sh configurable. Previously it was hardwired for 1B keys and tests
ran for 12 hours each. That kept me from using it. This makes it configuable, adds more tests,
makes the duration per-test configurable and refactors the test scripts.
Adds the seekrandomwhilemerging test to db_bench which is the same as seekrandomwhilewriting except
the writer thread does Merge rather than Put.
Forces the stall-time column in compaction IO stats to use a fixed format (H:M:S) which makes
it easier to scrape and parse. Also adds an option to AppendHumanMicros to force a fixed format.
Sometimes automation and humans want different format.
Calls thread->stats.AddBytes(bytes); in db_bench for more tests to get the MB/sec summary
stats in the output at test end.
Adds the average ingest rate to compaction IO stats. Output now looks like:
https://gist.github.com/mdcallag/2bd64d18be1b93adc494
More information on the benchmark output is at https://gist.github.com/mdcallag/db43a58bd5ac624f01e1
For benchmark.sh changes default RocksDB configuration to reduce stalls:
* min_level_to_compress from 2 to 3
* hard_rate_limit from 2 to 3
* max_grandparent_overlap_factor and max_bytes_for_level_multiplier from 10 to 8
* L0 file count triggers from 4,8,12 to 4,12,20 for (start,stall,stop)
Task ID: #6596829
Blame Rev:
Test Plan:
run tools/run_flash_bench.sh
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36075
Summary: Most of the approach is copied from WebSQL's MySQL branch. It's nice that we can do this without touching core RocksDB code.
Test Plan: Compiles and runs. Didn't test flashback code, as I don't have flashback device and most if it is c/p
Reviewers: MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: rven, lgalanis, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35391
[maa@srv2-nskb-devg2 rocksdb-master]$ CXX=/usr/local/CC/gcc-4.7.4/bin/g++ EXTRA_CXXFLAGS=-std=c++11 DISABLE_WARNING_AS_ERROR=1 make db_bench
CC db/db_bench.o
db/db_bench.cc: In member function 'rocksdb::Slice rocksdb::Benchmark::AllocateKey(std::unique_ptr<const char []>*)':
db/db_bench.cc:1434:41: error: use of deleted function 'void std::unique_ptr<_Tp [], _Dp>::reset(_Up) [with _Up = char*; _Tp = const char; _Dp = std::default_delete<const char []>]'
In file included from /usr/local/CC/gcc-4.7.4/lib/gcc/x86_64-unknown-linux-gnu/4.7.4/../../../../include/c++/4.7.4/memory:86:0,
from ./include/rocksdb/db.h:14,
from ./db/dbformat.h:14,
from ./db/db_impl.h:21,
from db/db_bench.cc:33:
Summary:
Report elapsed time of a thread operation in micros in ThreadStatus
instead of start time of a thread operation in seconds since the
Epoch, 1970-01-01 00:00:00 (UTC).
Test Plan:
./db_bench --benchmarks=fillrandom --num=100000 --threads=40 \
--max_background_compactions=10 --max_background_flushes=3 \
--thread_status_per_interval=1000 --key_size=16 --value_size=1000 \
--num_column_families=10
Sample Output:
ThreadID ThreadType cfName Operation ElapsedTime Stage State
140667724562496 High Pri column_family_name_000002 Flush 772.419 ms FlushJob::WriteLevel0Table
140667728756800 High Pri default Flush 617.845 ms FlushJob::WriteLevel0Table
140667732951104 High Pri column_family_name_000005 Flush 772.078 ms FlushJob::WriteLevel0Table
140667875557440 Low Pri column_family_name_000008 Compaction 1409.216 ms CompactionJob::Install
140667737145408 Low Pri
140667749728320 Low Pri
140667816837184 Low Pri column_family_name_000007 Compaction 1071.815 ms CompactionJob::ProcessKeyValueCompaction
140667787477056 Low Pri column_family_name_000009 Compaction 772.516 ms CompactionJob::ProcessKeyValueCompaction
140667741339712 Low Pri
140667758116928 Low Pri column_family_name_000004 Compaction 620.739 ms CompactionJob::ProcessKeyValueCompaction
140667753922624 Low Pri
140667842003008 Low Pri column_family_name_000006 Compaction 1260.079 ms CompactionJob::ProcessKeyValueCompaction
140667745534016 Low Pri
Reviewers: sdong, igor, rven
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35769
Summary:
This is like readwhilewriting but uses Merge rather than Put in the writer thread.
I am using it for in-progress benchmarks. I don't think the other benchmarks for Merge
cover this behavior. The purpose for this test is to measure read performance when
readers might have to merge results. This will also benefit from work-in-progress
to add skewed key generation.
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35115
Summary: It is no longer used by the implementation, so we should also remove it from the public API.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34971
Summary: Use a better way to map from a key with locality to a random location. Now with the same -read_random_exp_range setting, hit rate drops, which it is expected.
Test Plan: ./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=<multiple_values>
Reviewers: MarkCallaghan, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D34761
Summary: Allow GetThreadList() to report the start time of the current operation.
Test Plan:
./db_bench --benchmarks=fillrandom --num=100000 --threads=40 \
--max_background_compactions=10 --max_background_flushes=3 \
--thread_status_per_interval=1000 --key_size=16 --value_size=1000 \
--num_column_families=10
Sample output:
ThreadID ThreadType cfName Operation OP_StartTime State
140338840797248 High Pri column_family_name_000003 Flush 2015/03/09-17:49:59
140338844991552 High Pri column_family_name_000004 Flush 2015/03/09-17:49:59
140338849185856 Low Pri
140338983403584 Low Pri
140339008569408 Low Pri
140338861768768 Low Pri
140338924683328 Low Pri
140338899517504 Low Pri
140338853380160 Low Pri
140338882740288 Low Pri
140338865963072 High Pri column_family_name_000006 Flush 2015/03/09-17:49:59
140338954043456 Low Pri
140338857574464 Low Pri
Reviewers: igor, rven, sdong
Reviewed By: sdong
Subscribers: lgalanis, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34689
Summary: Introduce parameter -read_random_exp_range in db_bench to provide some key skewness in readrandom and multireadrandom benchmarks. It will helpful to cover block cache better.
Test Plan:
Run benchmarks with this new parameter. I can clearly see block cache hit rate change while I increase this value (DB size is about 66MB):
./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=0.0
rocksdb.block.cache.data.miss COUNT : 958418
rocksdb.block.cache.data.hit COUNT : 41582
./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=5.0
rocksdb.block.cache.data.miss COUNT : 819518
rocksdb.block.cache.data.hit COUNT : 180482
./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=10.0
rocksdb.block.cache.data.miss COUNT : 450479
rocksdb.block.cache.data.hit COUNT : 549521
./db_bench --benchmarks=readrandom -statistics -use_existing_db -cache_size=5000000 --read_random_exp_range=20.0
rocksdb.block.cache.data.miss COUNT : 223192
rocksdb.block.cache.data.hit COUNT : 776808
Reviewers: MarkCallaghan, kradhakrishnan, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D34629
Summary:
Add --thread_status_per_interval to db_bench, which allows
db_bench to optionally enable print the current thread status
periodically.
Test Plan:
./db_bench --benchmarks=fillrandom --num=100000 --threads=40 --max_background_compactions=10 --max_background_flushes=3 --thread_status_per_interval=1000 --key_size=16 --value_size=1000 --num_column_families=10
Sample output:
ThreadID ThreadType dbName cfName Operation State
140281571770432 Low Pri
140281575964736 High Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000001 Flush
140281710182464 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000008 Compaction
140281638879296 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000007 Compaction
140281592741952 Low Pri
140281580159040 High Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000002 Flush
140281676628032 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000006 Compaction
140281584353344 Low Pri
140281622102080 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000009 Compaction
140281605324864 Low Pri /tmp/rocksdbtest-5297/dbbench column_family_name_000004 Compaction
140281601130560 High Pri /tmp/rocksdbtest-5297/dbbench default Flush
140281596936256 Low Pri
140281588547648 Low Pri
Reviewers: igor, rven, sdong
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34515
Summary:
When having fixed max_bytes_for_level_base, the ratio of size of largest level and the second one can range from 0 to the multiplier. This makes LSM tree frequently irregular and unpredictable. It can also cause poor space amplification in some cases.
In this improvement (proposed by Igor Kabiljo), we introduce a parameter option.level_compaction_use_dynamic_max_bytes. When turning it on, RocksDB is free to pick a level base in the range of (options.max_bytes_for_level_base/options.max_bytes_for_level_multiplier, options.max_bytes_for_level_base] so that real level ratios are close to options.max_bytes_for_level_multiplier.
Test Plan: New unit tests and pass tests suites including valgrind.
Reviewers: MarkCallaghan, rven, yhchiang, igor, ikabiljo
Reviewed By: ikabiljo
Subscribers: yoshinorim, ikabiljo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31437
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
