Summary:
if we enable SSE42 globally when compiling the tree for preparing a
portable binary, which could be running on CPU w/o SSE42 instructions
even the GCC on the building host is able to emit SSE42 code, this leads
to illegal instruction errors on machines not supporting SSE42. to solve
this problem, crc32 detects the supported instruction at runtime, and
selects the supported CRC32 implementation according to the result of
`cpuid`. but intrinics like "_mm_crc32_u64()" will not be available
unless the "target" machine is appropriately specified in the command
line, like "-msse42", or using the "target" attribute.
we could pass "-msse42" only when compiling crc32c.cc, and allow the
compiler to generate the SSE42 instructions, but we are still at the
risk of executing illegal instructions on machines does not support
SSE42 if the compiler emits code that is not guarded by our runtime
detection. and we need to do the change in both Makefile and CMakefile.
or, we can use GCC's "target" attribute to enable the machine specific
instructions on certain function. in this way, we have finer grained
control of the used "target". and no need to change the makefiles. so
we don't need to duplicate the changes on both makefile and cmake as
the previous approach.
this problem surfaces when preparing a package for GNU/Linux distribution,
and we only applies to optimization for SSE42, so using a feature
only available on GCC/Clang is not that formidable.
Closes https://github.com/facebook/rocksdb/pull/2807
Differential Revision: D5786084
Pulled By: siying
fbshipit-source-id: bca5c0f877b8d6fb55f58f8f122254a26422843d
Summary:
Right now, if direct I/O is enabled, prefetching the last 512KB cannot be applied, except compaction inputs or readahead is enabled for iterators. This can create a lot of I/O for HDD cases. To solve the problem, the 512KB is prefetched in block based table if direct I/O is enabled. The prefetched buffer is passed in totegher with random access file reader, so that we try to read from the buffer before reading from the file. This can be extended in the future to support flexible user iterator readahead too.
Closes https://github.com/facebook/rocksdb/pull/2708
Differential Revision: D5593091
Pulled By: siying
fbshipit-source-id: ee36ff6d8af11c312a2622272b21957a7b5c81e7
Summary:
When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs.
This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions.
- Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads.
- Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default.
- Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic.
- Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`).
- Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free.
Closes https://github.com/facebook/rocksdb/pull/2580
Differential Revision: D5422916
Pulled By: ajkr
fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
Summary:
Replace dynamic_cast<> so that users can choose to build with RTTI off, so that they can save several bytes per object, and get tiny more memory available.
Some nontrivial changes:
1. Add Comparator::GetRootComparator() to get around the internal comparator hack
2. Add the two experiemental functions to DB
3. Add TableFactory::GetOptionString() to avoid unnecessary casting to get the option string
4. Since 3 is done, move the parsing option functions for table factory to table factory files too, to be symmetric.
Closes https://github.com/facebook/rocksdb/pull/2645
Differential Revision: D5502723
Pulled By: siying
fbshipit-source-id: fd13cec5601cf68a554d87bfcf056f2ffa5fbf7c
Summary:
This fixes OOMs that we (logdevice) are currently having in production.
SkipListRep constructor does a couple small allocations from ConcurrentArena (see InlineSkipList constructor). ConcurrentArena would sometimes allocate an entire block for that, which is a few megabytes (we use Options::arena_block_size = 4 MB). So an empty memtable can take take 4 MB of memory. We have ~40k column families (spread across 15 DB instances), so 4 MB per empty memtable easily OOMs a machine for us.
This PR makes ConcurrentArena always allocate from Arena's inline block when possible. So as long as InlineSkipList's initial allocations are below 2 KB there would be no blocks allocated for empty memtables.
Closes https://github.com/facebook/rocksdb/pull/2569
Differential Revision: D5404029
Pulled By: al13n321
fbshipit-source-id: 568ec22a3fd1a485c06123f6b2dfc5e9ef67cd23
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
In this test we are deleting 100 files, and we are expecting DeleteScheduler to delete 26 files in the background and 74 files immediately in the foreground
The main purpose of the test is to make sure that we delete files in foreground thread, which is verified in line 546
But sometimes we may end up with 26 files or 25 files in the trash directory because the background thread may be slow and not be able to delete the first file fast enough, so sometimes this test fail.
Remove
```
ASSERT_EQ(CountFilesInDir(trash_dir_), 25);
```
Since it does not have any benefit any way
Closes https://github.com/facebook/rocksdb/pull/2618
Differential Revision: D5458674
Pulled By: IslamAbdelRahman
fbshipit-source-id: 5556a9edfa049db71dce80b8e6ae0fdd25e1e74e
Summary:
Instead of ignoring UBSan checks, fix the negative shifts in
Hash(). Also add test to make sure the hash values are stable over
time. The values were computed before this change, so the test also
verifies the correctness of the change.
Closes https://github.com/facebook/rocksdb/pull/2546
Differential Revision: D5386369
Pulled By: yiwu-arbug
fbshipit-source-id: 6de4b44461a544d6222cc5d72d8cda2c0373d17e
Summary:
Currently metadata_block_size controls only index partition size. With this patch a partition is cut after any of index or filter partitions reaches metadata_block_size.
Closes https://github.com/facebook/rocksdb/pull/2452
Differential Revision: D5275651
Pulled By: maysamyabandeh
fbshipit-source-id: 5057e4424b4c8902043782e6bf8c38f0c4f25160
Summary:
We've got some DBs where iterators return Status with message "Corruption: block checksum mismatch" all the time. That's not very informative. It would be much easier to investigate if the error message contained the file name - then we would know e.g. how old the corrupted file is, which would be very useful for finding the root cause. This PR adds file name, offset and other stuff to some block corruption-related status messages.
It doesn't improve all the error messages, just a few that were easy to improve. I'm mostly interested in "block checksum mismatch" and "Bad table magic number" since they're the only corruption errors that I've ever seen in the wild.
Closes https://github.com/facebook/rocksdb/pull/2507
Differential Revision: D5345702
Pulled By: al13n321
fbshipit-source-id: fc8023d43f1935ad927cef1b9c55481ab3cb1339
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
Make default impl return NoSupported so the db_blob
tests exist in a meaningful manner.
Replace std::thread to port::Thread
Closes https://github.com/facebook/rocksdb/pull/2465
Differential Revision: D5275563
Pulled By: yiwu-arbug
fbshipit-source-id: cedf1a18a2c05e20d768c1308b3f3224dbd70ab6
Summary:
RateLimiterTest.Rate test has been failing continuously since many days on travis in Mac OSX PLATFORM_DEPENDENT test suite.
Check https://travis-ci.org/facebook/rocksdb/pull_requests.
Disabling this test for now, so that we can investigate more in depth.
Closes https://github.com/facebook/rocksdb/pull/2451
Differential Revision: D5250147
Pulled By: sagar0
fbshipit-source-id: d58476a3c2792d20e875754d1516c4bc7174e86c
Summary:
Allow users to rate limit background work based on read bytes, written bytes, or sum of read and written bytes. Support these by changing the RateLimiter API, so no additional options were needed.
Closes https://github.com/facebook/rocksdb/pull/2433
Differential Revision: D5216946
Pulled By: ajkr
fbshipit-source-id: aec57a8357dbb4bfde2003261094d786d94f724e
Summary:
Currently for direct I/O, the large maximum buffer is always allocated. This will be wasteful if users flush the data in much smaller chunks. This diff fix this by changing the behavior of incremental buffer works. When we enlarge buffer, we try to copy the existing data in the buffer to the enlarged buffer, rather than flush the buffer first. This can make sure that no extra I/O is introduced because of buffer enlargement.
Closes https://github.com/facebook/rocksdb/pull/2403
Differential Revision: D5178403
Pulled By: siying
fbshipit-source-id: a8fe1e7304bdb8cab2973340022fe80ff83449fd
Summary:
If ReadOptions.low_pri=true and compaction is behind, the write will either return immediate or be slowed down based on ReadOptions.no_slowdown.
Closes https://github.com/facebook/rocksdb/pull/2369
Differential Revision: D5127619
Pulled By: siying
fbshipit-source-id: d30e1cff515890af0eff32dfb869d2e4c9545eb0
Summary:
… headers
https://github.com/facebook/rocksdb/pull/2199 should not reference RocksDB-specific macros (like ROCKSDB_SUPPORT_THREAD_LOCAL in this case) to public headers, `iostats_context.h` and `perf_context.h`. We shouldn't do that because users have to provide these compiler flags when building their binary with RocksDB.
We should hide the thread local global variable inside our implementation and just expose a function api to retrieve these variables. It may break some users for now but good for long term.
make check -j64
Closes https://github.com/facebook/rocksdb/pull/2380
Differential Revision: D5177896
Pulled By: lightmark
fbshipit-source-id: 6fcdfac57f2e2dcfe60992b7385c5403f6dcb390
Summary:
Improve write buffer manager in several ways:
1. Size is tracked when arena block is allocated, rather than every allocation, so that it can better track actual memory usage and the tracking overhead is slightly lower.
2. We start to trigger memtable flush when 7/8 of the memory cap hits, instead of 100%, and make 100% much harder to hit.
3. Allow a cache object to be passed into buffer manager and the size allocated by memtable can be costed there. This can help users have one single memory cap across block cache and memtable.
Closes https://github.com/facebook/rocksdb/pull/2350
Differential Revision: D5110648
Pulled By: siying
fbshipit-source-id: b4238113094bf22574001e446b5d88523ba00017
Summary:
It's hard for RocksDB to come up with a good default of delayed write rate. Use rate given by rate limiter if it is availalbe. This provides the I/O order of magnitude.
Closes https://github.com/facebook/rocksdb/pull/2357
Differential Revision: D5115324
Pulled By: siying
fbshipit-source-id: 341065ad2211c981fc804011c0f0e59a50c7e754
Summary:
Previously users could set `max_background_flushes=0` to force rocksdb to use a single thread pool for both background flushes and compactions. That'll no longer be possible since I'm going to deprecate `max_background_flushes` and `max_background_compactions` in favor of a single option. This diff introduces a new way to force a single thread pool: when high-pri pool has zero threads, all background jobs will be submitted to low-pri pool.
Note the majority of the code change is adding `Env::GetBackgroundThreads()`, which is necessary to check whether the user has provided a zero-sized thread pool.
Closes https://github.com/facebook/rocksdb/pull/2204
Differential Revision: D4936256
Pulled By: ajkr
fbshipit-source-id: 929a07a0c0705f7766f5339cd013ff74e90d6e01
Summary:
This diff changes `StatisticsImpl` from a thread-local approach to a core-local one. The goal is to perform faster aggregations, particularly for applications that have many threads. There should be no behavior change.
Closes https://github.com/facebook/rocksdb/pull/2258
Differential Revision: D5016258
Pulled By: ajkr
fbshipit-source-id: 7d4d165b4a91d8110f0409d113d1be91f22d31a9
Summary:
Disable direct reads for log and manifest. Direct reads should not affect sequential_file
Also add kDirectIO for option_config_ in db_test_util
Closes https://github.com/facebook/rocksdb/pull/2337
Differential Revision: D5100261
Pulled By: lightmark
fbshipit-source-id: 0ebfd13b93fa1b8f9acae514ac44f8125a05868b
Summary:
unity test will fail even if we have the same function names in different anonymous namespaces in different files.
Closes https://github.com/facebook/rocksdb/pull/2321
Differential Revision: D5083783
Pulled By: lightmark
fbshipit-source-id: 1347aaf866900af30d23cdd4f29c1b96f17352af
Summary:
We've had a couple CockroachDB users fail to build RocksDB on exotic platforms, so I figured I'd try my hand at solving these issues upstream. The problems stem from a) `USE_SSE=1` being too aggressive about turning on SSE4.2, even on toolchains that don't support SSE4.2 and b) RocksDB attempting to detect support for thread-local storage based on OS, even though it can vary by compiler on the same OS.
See the individual commit messages for details. Regarding SSE support, this PR should change virtually nothing for non-CMake based builds. `make`, `PORTABLE=1 make`, `USE_SSE=1 make`, and `PORTABLE=1 USE_SSE=1 make` function exactly as before, except that SSE support will be automatically disabled when a simple SSE4.2-using test program fails to compile, as it does on OpenBSD. (OpenBSD's ports GCC supports SSE4.2, but its binutils do not, so `__SSE_4_2__` is defined but an SSE4.2-using program will fail to assemble.) A warning is emitted in this case. The CMake build is modified to support the same set of options, except that `USE_SSE` is spelled `FORCE_SSE42` because `USE_SSE` is rather useless now that we can automatically detect SSE support, and I figure changing options in the CMake build is less disruptive than changing the non-CMake build.
I've tested these changes on all the platforms I can get my hands on (macOS, Windows MSVC, Windows MinGW, and OpenBSD) and it all works splendidly. Let me know if there's anything you object to—I obviously don't mean to break any of your build pipelines in the process of fixing ours downstream.
Closes https://github.com/facebook/rocksdb/pull/2199
Differential Revision: D5054042
Pulled By: yiwu-arbug
fbshipit-source-id: 938e1fc665c049c02ae15698e1409155b8e72171
Summary:
try to clean up the type conversions and hope it passes on windows.
one interesting thing I learned is that bitshift operations are special: in `x << y`, the result type depends only on the type of `x`, unlike most arithmetic operations where the result type depends on both operands' types.
Closes https://github.com/facebook/rocksdb/pull/2277
Differential Revision: D5050145
Pulled By: ajkr
fbshipit-source-id: f3309e77526ac9612c632bf93a62d99757af9a29
Summary:
Moved the logic for core-local array out of ConcurrentArena and into a separate class because I want to reuse it for core-local stats.
Closes https://github.com/facebook/rocksdb/pull/2256
Differential Revision: D5011518
Pulled By: ajkr
fbshipit-source-id: a75a7b8f7b7a42fd6273489ada405f14c6be196a
Summary:
- downcase includes for case-sensitive filesystems
- give targets the same name (librocksdb) on all platforms
With this patch it is possible to cross-compile RocksDB for Windows
from a Linux host using mingw.
cc yuslepukhin orgads
Closes https://github.com/facebook/rocksdb/pull/2107
Differential Revision: D4849784
Pulled By: siying
fbshipit-source-id: ad26ed6b4d393851aa6551e6aa4201faba82ef60
Summary:
Now if we have iterate_upper_bound set, we continue read until get a key >= upper_bound. For a lot of cases that neighboring data blocks have a user key gap between them, our index key will be a user key in the middle to get a shorter size. For example, if we have blocks:
[a b c d][f g h]
Then the index key for the first block will be 'e'.
then if upper bound is any key between 'd' and 'e', for example, d1, d2, ..., d99999999999, we don't have to read the second block and also know that we have done our iteration by reaching the last key that smaller the upper bound already.
This diff can reduce RA in most cases.
Closes https://github.com/facebook/rocksdb/pull/2239
Differential Revision: D4990693
Pulled By: lightmark
fbshipit-source-id: ab30ea2e3c6edf3fddd5efed3c34fcf7739827ff
Summary:
Remove double buffering on RandomRead on Windows.
With more logic appear in file reader/write Read no longer
obeys forwarding calls to Windows implementation.
Previously direct_io (unbuffered) was only available on Windows
but now is supported as generic.
We remove intermediate buffering on Windows.
Remove random_access_max_buffer_size option which was windows specific.
Non-zero values for that opton introduced unnecessary lock contention.
Remove Env::EnableReadAhead(), Env::ShouldForwardRawRequest() that are
no longer necessary.
Add aligned buffer reads for cases when requested reads exceed read ahead size.
Closes https://github.com/facebook/rocksdb/pull/2105
Differential Revision: D4847770
Pulled By: siying
fbshipit-source-id: 8ab48f8e854ab498a4fd398a6934859792a2788f
Summary:
�fix the buffer size in case of ppl use buffer size as their block_size.
Closes https://github.com/facebook/rocksdb/pull/2198
Differential Revision: D4956878
Pulled By: lightmark
fbshipit-source-id: 8bb0dc9c133887aadcd625d5261a3d1110b71473
Summary:
Replacement of #2147
The change was squashed due to a lot of conflicts.
Closes https://github.com/facebook/rocksdb/pull/2194
Differential Revision: D4929799
Pulled By: siying
fbshipit-source-id: 5cd49c254737a1d5ac13f3c035f128e86524c581
Summary:
prefetch some data from the end of the file for each compaction to reduce IO.
Closes https://github.com/facebook/rocksdb/pull/2149
Differential Revision: D4880576
Pulled By: lightmark
fbshipit-source-id: aa767cd1afc84c541837fbf1ad6c0d45b34d3932
Summary:
Replace Options::use_direct_writes with Options::use_direct_io_for_flush_and_compaction
Now if Options::use_direct_io_for_flush_and_compaction = true, we will enable direct io for both reads and writes for flush and compaction job. Whereas Options::use_direct_reads controls user reads like iterator and Get().
Closes https://github.com/facebook/rocksdb/pull/2117
Differential Revision: D4860912
Pulled By: lightmark
fbshipit-source-id: d93575a8a5e780cf7e40797287edc425ee648c19
Summary:
Users usually set readahead buffer to a multiple of 4k, more than that, usually a multiple of blocks.
So previously we set real buffer size 512 * n + 4k, which may introduce an additional block reading.
Closes https://github.com/facebook/rocksdb/pull/2138
Differential Revision: D4871504
Pulled By: lightmark
fbshipit-source-id: b070faa51d92e976e8e8468c00692699e585e243
Summary:
Extend TransactionOptions to include max_write_batch_size which determines the maximum size of the writebatch representation. If memory limit is exceeded, the operation will abort with subcode kMemoryLimit.
Closes https://github.com/facebook/rocksdb/pull/2124
Differential Revision: D4861842
Pulled By: lth
fbshipit-source-id: 46fd172ea67cc90bbba829bf0d70cfab2261c161
Summary:
This is an effort to club all string related utility functions into one common place, in string_util, so that it is easier for everyone to know what string processing functions are available. Right now they seem to be spread out across multiple modules, like logging and options_helper.
Check the sub-commits for easier reviewing.
Closes https://github.com/facebook/rocksdb/pull/2094
Differential Revision: D4837730
Pulled By: sagar0
fbshipit-source-id: 344278a
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
This reverts commit 0fd574926c.
It breaks tmpfs on kernel 4.0 or earlier. We will wait for the fix before remove this part
Closes https://github.com/facebook/rocksdb/pull/2096
Differential Revision: D4839661
Pulled By: lightmark
fbshipit-source-id: 574a51f
Summary:
I've needed Env timing measurements a few times now, so finally built something for it.
Closes https://github.com/facebook/rocksdb/pull/2073
Differential Revision: D4811231
Pulled By: ajkr
fbshipit-source-id: 218a249
Summary:
It is confusing to have auto_roll_logger to stay under db/, which has nothing to do with database. Move filename together as it is a dependency.
Closes https://github.com/facebook/rocksdb/pull/2080
Differential Revision: D4821141
Pulled By: siying
fbshipit-source-id: ca7d768
Summary:
There still are many warnings (most of them about invalid printf format
for long long), but it builds if FAIL_ON_WARNINGS is disabled.
Closes https://github.com/facebook/rocksdb/pull/2052
Differential Revision: D4807355
Pulled By: siying
fbshipit-source-id: ef03786
Summary:
temporarily disable since it isn't working on travis.
Closes https://github.com/facebook/rocksdb/pull/2064
Differential Revision: D4807373
Pulled By: ajkr
fbshipit-source-id: f2bb2b0
Summary:
Operations like Seek/Next/Prev sometimes take too long to complete when there are many internal keys to be skipped. Adding an option, max_skippable_internal_keys -- which could be used to set a threshold for the maximum number of keys that can be skipped, will help to address these cases where it is much better to fail a request (as incomplete) than to wait for a considerable time for the request to complete.
This feature -- to fail an iterator seek request as incomplete, is disabled by default when max_skippable_internal_keys = 0. It is enabled only when max_skippable_internal_keys > 0.
This feature is based on the discussion mentioned in the PR https://github.com/facebook/rocksdb/pull/1084.
Closes https://github.com/facebook/rocksdb/pull/2000
Differential Revision: D4753223
Pulled By: sagar0
fbshipit-source-id: 1c973f7
Summary:
instead of thread_local
The cleanup path for the rocksdb database might not have the
thread_updater_local_cache_ pointer initialized because the thread
executing the cleanup is likely not a rocksdb thread. This results in a
memory leak detected by Valgrind. The cleanup code path should use the
thread_status_updater pointer obtained from the DB object instead of a
thread local one.
Closes https://github.com/facebook/rocksdb/pull/2059
Differential Revision: D4801611
Pulled By: hermanlee
fbshipit-source-id: 407d7de
Summary:
Currently the fast crc32 path is not enabled on Windows. I am trying to enable it here, hopefully, with the minimum impact to the existing code structure.
Closes https://github.com/facebook/rocksdb/pull/2033
Differential Revision: D4770635
Pulled By: siying
fbshipit-source-id: 676f8b8
Summary:
Allow the users to specify the target index partition size.
With this patch an index partition is cut before its estimated in-memory size goes above the configured value for metadata_block_size. The filter partitions are still cut right after an index partition is cut.
Closes https://github.com/facebook/rocksdb/pull/2041
Differential Revision: D4780216
Pulled By: maysamyabandeh
fbshipit-source-id: 95a0831
Summary:
Added fifo benchmark to db_bench.
One thing i am not sure is that i am using CompactRange() instead of CompactFiles(). (may cause performance skew because CompactionRange() is not happening in current thread?) For CompactFiles(), for some reason FIFO compaction doesn't work as expected. More insight is welcomed. I guess FIFO compaction doesn't work with file names? igorcanadi
test cmd:
./db_bench --compaction_style=2 --benchmarks=fillseqdeterministic --disable_auto_compactions --num_levels=1 --fifo_compaction_max_table_files_size_mb=10
---------------------- DB 0 LSM ---------------------
Level[0]: /000014.sst(size: 4211014 bytes)
fillseqdeterministic : 4.731 micros/op 211381 ops/sec; 23.4 MB/s
Closes https://github.com/facebook/rocksdb/pull/1734
Differential Revision: D4774964
Pulled By: siying
fbshipit-source-id: 9d08df6
Summary:
in buffered io, the filesize_ is the real size.
Closes https://github.com/facebook/rocksdb/pull/1991
Differential Revision: D4711433
Pulled By: lightmark
fbshipit-source-id: ad604b9
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
Fixing some bugs in MockEnv so it be actually used.
Closes https://github.com/facebook/rocksdb/pull/1914
Differential Revision: D4609923
Pulled By: maysamyabandeh
fbshipit-source-id: ca25735
Summary:
Without the cast, the build will break on Windows.
Closes https://github.com/facebook/rocksdb/pull/1982
Differential Revision: D4690462
Pulled By: ajkr
fbshipit-source-id: c493b6c
Summary:
This is the second split of this pull request: https://github.com/facebook/rocksdb/pull/1891 which includes only the builder part. The testing will be included in the third split, where the reader is also included.
Closes https://github.com/facebook/rocksdb/pull/1952
Differential Revision: D4660272
Pulled By: maysamyabandeh
fbshipit-source-id: 36b3cf0
Summary:
This is the metric I plan to use for adaptive rate limiting. The statistics are updated only if the rate limiter is drained by flush or compaction. I believe (but am not certain) that this is the normal case.
The Statistics object is passed in RateLimiter::Request() to avoid requiring changes to client code, which would've been necessary if we passed it in the RateLimiter constructor.
Closes https://github.com/facebook/rocksdb/pull/1946
Differential Revision: D4646489
Pulled By: ajkr
fbshipit-source-id: d8e0161
Summary:
This option is needed to be enabled for Direct IO
and I cannot think of a reason where we need to disable it
remove it and default it to true
Closes https://github.com/facebook/rocksdb/pull/1944
Differential Revision: D4641088
Pulled By: IslamAbdelRahman
fbshipit-source-id: d7085b9
Summary:
- Change data_[b] to data_[b / 8] in DynamicBloom::Prefetch, as b means the b-th bit in data_ and data_[b / 8] is the proper byte in data_.
Closes https://github.com/facebook/rocksdb/pull/1935
Differential Revision: D4628696
Pulled By: siying
fbshipit-source-id: bc5a0c6
Summary:
For the sake of making our options simpler, we should keep options.h as simple as possible and move more advanced/less common options to advaned_options.h
I started with ColumnFamilyOptions and also did some re-ordering
I have moved all ColumnFamilyOptions to advanced_options.h and only left these options in options.h
```
const Comparator* comparator = BytewiseComparator();
std::shared_ptr<MergeOperator> merge_operator = nullptr;
const CompactionFilter* compaction_filter = nullptr;
std::shared_ptr<CompactionFilterFactory> compaction_filter_factory = nullptr;
size_t write_buffer_size = 64 << 20;
CompressionType compression;
int level0_file_num_compaction_trigger = 4;
bool disable_auto_compactions = false;
```
Please feel free to comment on specific options if you think they should be advanced or should not be
Closes https://github.com/facebook/rocksdb/pull/1847
Differential Revision: D4519996
Pulled By: IslamAbdelRahman
fbshipit-source-id: abebd9a
Summary:
…action
The two options, min_partial_merge_operands and verify_checksums_in_compaction, are not seldom used. Remove them to reduce the total number of options. Also remove them from Java and C interface.
Closes https://github.com/facebook/rocksdb/pull/1902
Differential Revision: D4601219
Pulled By: siying
fbshipit-source-id: aad4cb2
Summary:
querying logical sector size from the device instead of hardcoding it for linux platform.
Closes https://github.com/facebook/rocksdb/pull/1875
Differential Revision: D4591946
Pulled By: ajkr
fbshipit-source-id: 4e9805c
Summary:
Missing this function will cause RandomAccessFileReader not doing alignment in Direct IO mode, which introduce an IOError: invalid argument.
Closes https://github.com/facebook/rocksdb/pull/1900
Differential Revision: D4601261
Pulled By: lightmark
fbshipit-source-id: c3eadf1
Summary:
we occasionally missing this call so the file size will be wrong
Closes https://github.com/facebook/rocksdb/pull/1894
Differential Revision: D4598446
Pulled By: lightmark
fbshipit-source-id: 42b6ef5
Summary:
Some places autodetected. These are the two places that didn't.
closes#1498
Still unsure if the following instances of 4 * 1024 need fixing in:
util/io_posix.h
include/rocksdb/table.h (appears to be blocksize and different)
utilities/persistent_cache/block_cache_tier.cc
utilities/persistent_cache/persistent_cache_test.h
include/rocksdb/env.h
util/env_posix.cc
db/column_family.cc
Closes https://github.com/facebook/rocksdb/pull/1499
Differential Revision: D4593640
Pulled By: yiwu-arbug
fbshipit-source-id: efc48de
Summary:
I'd like to propose a patch to expose a new IOError type with subcode kStaleFile to allow to detect when ESTALE error is returned. This allows the rocksdb consumers to handle this error separately from other IOErrors.
I've also added a missing string representation for the kDeadlock subcode, I believe calling ToString() on Status object with that subcode would result in an out of band access in the msgs array,
Please let me know if you have any questions or would like me to make any changes to this pull request.
Closes https://github.com/facebook/rocksdb/pull/1748
Differential Revision: D4387675
Pulled By: IslamAbdelRahman
fbshipit-source-id: 67feb13
Summary:
fix lite bugs
disable direct io in lite mode
Closes https://github.com/facebook/rocksdb/pull/1870
Differential Revision: D4559866
Pulled By: yiwu-arbug
fbshipit-source-id: 3761c51
Summary:
NowMicros() provides non-monotonic time. When wall clock is
synchronized or changed, the non-monotonicity time points will affect write rate
controllers. This patch changes write_controller.cc and rate_limiter.cc to use
monotonic time points.
Closes https://github.com/facebook/rocksdb/pull/1865
Differential Revision: D4561732
Pulled By: siying
fbshipit-source-id: 95ece62
Summary:
Remove disableDataSync, and another similarly named disable_data_sync options.
This is being done to simplify options, and also because the performance gains of this feature can be achieved by other methods.
Closes https://github.com/facebook/rocksdb/pull/1859
Differential Revision: D4541292
Pulled By: sagar0
fbshipit-source-id: 5b3a6ca
Summary:
Partition Index blocks and use a Partition-index as a 2nd level index.
The two-level index can be used by setting
BlockBasedTableOptions::kTwoLevelIndexSearch as the index type and
configuring BlockBasedTableOptions::index_per_partition
t15539501
Closes https://github.com/facebook/rocksdb/pull/1814
Differential Revision: D4473535
Pulled By: maysamyabandeh
fbshipit-source-id: bffb87e
Summary:
introduce new methods into a public threadpool interface,
- allow submission of std::functions as they allow greater flexibility.
- add Joining methods to the implementation to join scheduled and submitted jobs with
an option to cancel jobs that did not start executing.
- Remove ugly `#ifdefs` between pthread and std implementation, make it uniform.
- introduce pimpl for a drop in replacement of the implementation
- Introduce rocksdb::port::Thread typedef which is a replacement for std::thread. On Posix Thread defaults as before std::thread.
- Implement WindowsThread that allocates memory in a more controllable manner than windows std::thread with a replaceable implementation.
- should be no functionality changes.
Closes https://github.com/facebook/rocksdb/pull/1823
Differential Revision: D4492902
Pulled By: siying
fbshipit-source-id: c74cb11
Summary:
Change the default of delayed slowdown value to 16MB/s and further increase the L0 stop condition to 36 files.
Closes https://github.com/facebook/rocksdb/pull/1821
Differential Revision: D4489229
Pulled By: siying
fbshipit-source-id: 1003981
Summary:
C++11 in-class initialization is cleaner and makes it the default more explicit to our users and more visible.
Use it for ColumnFamilyOptions and DBOptions
Closes https://github.com/facebook/rocksdb/pull/1822
Differential Revision: D4490473
Pulled By: IslamAbdelRahman
fbshipit-source-id: c493a87
Summary:
The code in DBOptions::Dump is simply a duplicate of the code in ImmutableDBOptions::Dump and MutableDBOptions.Dump
consolidate duplicate code.
tested visually
Closes https://github.com/facebook/rocksdb/pull/1818
Differential Revision: D4486710
Pulled By: IslamAbdelRahman
fbshipit-source-id: 7085189
Summary:
If the users use the NewLRUCache() without passing in the number of shard bits, instead of using hard-coded 6, we'll determine it based on capacity.
Closes https://github.com/facebook/rocksdb/pull/1584
Differential Revision: D4242517
Pulled By: siying
fbshipit-source-id: 86b0f18
Summary:
For case !handle->InCache() && handle->refs >= 1 (the third case mentioned in lru_cache.h), the key was overwritten by Insert(). In this case, the refcount can still be incremented, and the cache handle will never enter LRU list. Fix Ref() logic for this case.
Closes https://github.com/facebook/rocksdb/pull/1808
Differential Revision: D4467656
Pulled By: ajkr
fbshipit-source-id: c0784d8
Summary:
The Env registration framework supports registering client Envs and selecting which one to instantiate according to a text field. This enabled things like adding the -env_uri argument to db_bench, so the same binary could be reused with different Envs just by changing CLI config.
Now this problem has come up again in a non-Env context, as I want to instantiate a client Statistics implementation from db_bench, which is configured entirely via text parameters. Also, in the future we may wish to use it for deserializing client objects when loading OPTIONS file.
This diff generalizes the Env registration logic to work with arbitrary types.
- Generalized registration and instantiation code by templating them
- The entire implementation is in a header file as that's Google style guide's recommendation for template definitions
- Pattern match with std::regex_match rather than checking prefix, which was the previous behavior
- Rename functions/files to be non-Env-specific
Closes https://github.com/facebook/rocksdb/pull/1776
Differential Revision: D4421933
Pulled By: ajkr
fbshipit-source-id: 34647d1
Summary:
If we don't wait for the threads to finish after each run, the thread queue may not be empty while the next test starts to run, which can cause unexpected behaviors.
Also make some of the relaxed read/write more restrict.
Closes https://github.com/facebook/rocksdb/pull/1590
Reviewed By: AsyncDBConnMarkedDownDBException
Differential Revision: D4245922
Pulled By: AsyncDBConnMarkedDownDBException
fbshipit-source-id: f83b74b
Summary:
If users directly call OptimizeForPointLookup(), it is broken as the option isn't compatible with parallel memtable insert. Fix it by using memtable bloomo filter instead.
Closes https://github.com/facebook/rocksdb/pull/1791
Differential Revision: D4442836
Pulled By: siying
fbshipit-source-id: bf6c9cd
Summary:
Fix the bug when sync log fail, FlushJob::Run() will not be execute and
reference to cfd->current() will not be release.
Closes https://github.com/facebook/rocksdb/pull/1792
Differential Revision: D4441316
Pulled By: yiwu-arbug
fbshipit-source-id: 5523e28
Summary:
Remove the logic since we don't use buffer cache with direct IO. Resolve
read regression we currently have.
Closes https://github.com/facebook/rocksdb/pull/1782
Differential Revision: D4430408
Pulled By: yiwu-arbug
fbshipit-source-id: 5557bba
Summary:
also change variable name `direct_io_` to `use_direct_io_` in WritableFile to make it consistent with read path.
Closes https://github.com/facebook/rocksdb/pull/1770
Differential Revision: D4416435
Pulled By: lightmark
fbshipit-source-id: 4143c53
Summary:
direct IO reads refactoring
remove unnecessary classes and unified interfaces
tested with db_bench
need more change for options and ON/OFF for different files.
Since disabled is default, it should be fine now
Closes https://github.com/facebook/rocksdb/pull/1636
Differential Revision: D4307189
Pulled By: lightmark
fbshipit-source-id: 6991e22
Summary:
…perly on travis
There is some old code in PosixWritableFile::Close(), which
truncates the file to the measured size and then does an extra fallocate
with KEEP_SIZE. This is commented as a failsafe because in some
cases ftruncate doesn't do the right job (I don't know of an instance of
this btw). However doing an fallocate with KEEP_SIZE should not increase
the file size. However on Travis Worker which is Docker (likely AUFS )
its not working. There are comments on web that show that the AUFS
author had initially not implemented fallocate, and then did it later.
So not sure what is the quality of the implementation.
Closes https://github.com/facebook/rocksdb/pull/1765
Differential Revision: D4401340
Pulled By: anirbanr-fb
fbshipit-source-id: e2d8100
Summary:
Previously the only way to increment a handle's refcount was to invoke Lookup(), which (1) did hash table lookup to get cache handle, (2) incremented that handle's refcount. For a future DeleteRange optimization, I added a function, Ref(), for when the caller already has a cache handle and only needs to do (2).
Closes https://github.com/facebook/rocksdb/pull/1761
Differential Revision: D4397114
Pulled By: ajkr
fbshipit-source-id: 9addbe5
Summary:
Enable directIO on WritableFileImpl::Append
with offset being current length of the file.
Enable UniqueID tests on Windows, disable others but
leeting them to compile. Unique tests are valuable to
detect failures on different filesystems and upcoming
ReFS.
Clear output in WinEnv Getchildren.This is different from
previous strategy, do not touch output on failure.
Make sure DBTest.OpenWhenOpen works with windows error message
Closes https://github.com/facebook/rocksdb/pull/1746
Differential Revision: D4385681
Pulled By: IslamAbdelRahman
fbshipit-source-id: c07b702
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
File copying happens when creating checkpoints and bulkloading files from different FS partition. We should fsync the files when copying them to guarantee durability. A side effect will be that the dirty pages in file system buffers won't grow too large.
Closes https://github.com/facebook/rocksdb/pull/1728
Differential Revision: D4371083
Pulled By: siying
fbshipit-source-id: 579e14c
Summary:
Improve cache options logging to info log.
Also print the value of
cache_index_and_filter_blocks_with_high_priority.
Closes https://github.com/facebook/rocksdb/pull/1709
Differential Revision: D4358776
Pulled By: yiwu-arbug
fbshipit-source-id: 8f030a0
Summary:
?e_file_max_buffer_size)
If we overwrite WritableFile and has a buffer which has the same
function of buf_. We hope remove the cache function of
WritableFileWriter. So using options.writable_file_max_buffer_size = 0
to disable cache function.
Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com>
Closes https://github.com/facebook/rocksdb/pull/1628
Differential Revision: D4307219
Pulled By: yiwu-arbug
fbshipit-source-id: 77a6e26
Summary:
Fixes compile error:
In file included from ./util/statistics.h:17:0,
from ./util/stop_watch.h:8,
from ./util/perf_step_timer.h:9,
from ./util/iostats_context_imp.h:8,
from ./util/posix_logger.h:27,
from ./port/util_logger.h:18,
from ./db/auto_roll_logger.h:15,
from db/auto_roll_logger.cc:6:
./util/thread_local.h:65:16: error: 'function' in namespace 'std' does not name a template type
typedef std::function<void(void*, void*)> FoldFunc;
Closes https://github.com/facebook/rocksdb/pull/1656
Differential Revision: D4318702
Pulled By: yiwu-arbug
fbshipit-source-id: 8c5d17a
Summary:
hopefully the last of the gcc-7 compile errors
Closes https://github.com/facebook/rocksdb/pull/1675
Differential Revision: D4332106
Pulled By: IslamAbdelRahman
fbshipit-source-id: 139448c
Summary:
fixes error (that occurred on gcc-7):
error:
util/env_basic_test.cc: In member function 'virtual rocksdb::Status rocksdb::NormalizingEnvWrapper::GetChildren(const string&, std::vector<std::__cxx11::basic_string<char> >*)':
util/env_basic_test.cc:27:21: error: 'remove_if' is not a member of 'std'
result->erase(std::remove_if(result->begin(), result->end(),
^~~
Closes https://github.com/facebook/rocksdb/pull/1674
Differential Revision: D4331221
Pulled By: ajkr
fbshipit-source-id: 9bbdc78
Summary:
util/logging.cc💯13: error: output may be truncated before the last format character [-Werror=format-length=]
std::string NumberToHumanString(int64_t num) {
^~~~~~~~~~~~~~~~~~~
util/logging.cc:106:59: note: format output between 3 and 19 bytes into a destination of size 16
snprintf(buf, sizeof(buf), "%" PRIi64 "K", num / 1000);
Closes https://github.com/facebook/rocksdb/pull/1653
Differential Revision: D4318687
Pulled By: yiwu-arbug
fbshipit-source-id: 3a5c931
Summary:
Increased buffer size to 1650.
util/histogram.cc: In member function 'std::__cxx11::string rocksdb::HistogramStat::ToString() const':
util/histogram.cc:189:13: error: '%.2f' directive output truncated writing between 4 and 313 bytes into a region of size 0 [-Werror=format-length=]
std::string HistogramStat::ToString() const {
^~~~~~~~~~~~~
util/histogram.cc:205:30: note: format output between 69 and 1614 bytes into a destination of size 200
Percentile(99.99));
^
cc1plus: all warnings being treated as errors
Makefile:1521: recipe for target 'util/histogram.o' failed
Closes https://github.com/facebook/rocksdb/pull/1660
Differential Revision: D4318820
Pulled By: yiwu-arbug
fbshipit-source-id: 45ae6ea
Summary:
It'd be nice to use the error status type to distinguish
between user error and system error. For example, GetChildren can fail
listing a backup directory's contents either because a bad path was provided
(user error) or because an operation failed, e.g., a remote storage service
call failed (system error). In the former case, we want to continue and treat
the backup directory as empty; in the latter case, we want to immediately
propagate the error to the caller.
This diff uses NotFound to indicate user error and IOError to indicate
system error. Previously IOError indicated both.
Closes https://github.com/facebook/rocksdb/pull/1644
Differential Revision: D4312157
Pulled By: ajkr
fbshipit-source-id: 51b4f24
Summary:
This is an implementation of non-exclusive locks for pessimistic transactions. It is relatively simple and does not prevent starvation (ie. it's possible that request for exclusive access will never be granted if there are always threads holding shared access). It is done by changing `KeyLockInfo` to hold an set a transaction ids, instead of just one, and adding a flag specifying whether this lock is currently held with exclusive access or not.
Some implementation notes:
- Some lock diagnostic functions had to be updated to return a set of transaction ids for a given lock, eg. `GetWaitingTxn` and `GetLockStatusData`.
- Deadlock detection is a bit more complicated since a transaction can now wait on multiple other transactions. A BFS is done in this case, and deadlock detection depth is now just a limit on the number of transactions we visit.
- Expirable transactions do not work efficiently with shared locks at the moment, but that's okay for now.
Closes https://github.com/facebook/rocksdb/pull/1573
Differential Revision: D4239097
Pulled By: lth
fbshipit-source-id: da7c074
Summary:
Made delete_obsolete_files_period_micros option dynamic. It can be updating using DB::SetDBOptions().
Closes https://github.com/facebook/rocksdb/pull/1595
Differential Revision: D4246569
Pulled By: tonek
fbshipit-source-id: d23f560
Summary:
Reduce number of comparisons in heap by caching which child node in the first level is smallest (left_child or right_child)
So next time we can compare directly against the smallest child
I see that the total number of calls to comparator drops significantly when using this optimization
Before caching (~2mil key comparison for iterating the DB)
```
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq" --db="/dev/shm/heap_opt" --use_existing_db --disable_auto_compactions --cache_size=1000000000 --perf_level=2
readseq : 0.338 micros/op 2959201 ops/sec; 327.4 MB/s user_key_comparison_count = 2000008
```
After caching (~1mil key comparison for iterating the DB)
```
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq" --db="/dev/shm/heap_opt" --use_existing_db --disable_auto_compactions --cache_size=1000000000 --perf_level=2
readseq : 0.309 micros/op 3236801 ops/sec; 358.1 MB/s user_key_comparison_count = 1000011
```
It also improves
Closes https://github.com/facebook/rocksdb/pull/1600
Differential Revision: D4256027
Pulled By: IslamAbdelRahman
fbshipit-source-id: 76fcc66
Summary:
disable UBSAN for functions with intentional left shift on -ve number / overflow
These functions are
rocksdb:: Hash
FixedLengthColBufEncoder::Append
FaultInjectionTest:: Key
Closes https://github.com/facebook/rocksdb/pull/1577
Differential Revision: D4240801
Pulled By: IslamAbdelRahman
fbshipit-source-id: 3e1caf6
Summary:
Having -ve value for max_write_buffer_number does not make sense and cause us to do a left shift on a -ve value number
Closes https://github.com/facebook/rocksdb/pull/1579
Differential Revision: D4240798
Pulled By: IslamAbdelRahman
fbshipit-source-id: bd6267e
Summary:
In one deployment we saw high latencies (presumably from slow iterator operations) and a lot of CPU time reported by perf with this stack:
```
rocksdb::MergingIterator::Next
rocksdb::DBIter::FindNextUserEntryInternal
rocksdb::DBIter::Seek
```
I think what's happening is:
1. we create a snapshot iterator,
2. we do lots of Put()s for the same key x; this creates lots of entries in memtable,
3. we seek the iterator to a key slightly smaller than x,
4. the seek walks over lots of entries in memtable for key x, skipping them because of high sequence numbers.
CC IslamAbdelRahman
Closes https://github.com/facebook/rocksdb/pull/1413
Differential Revision: D4083879
Pulled By: IslamAbdelRahman
fbshipit-source-id: a83ddae
Summary:
Current write stalling system has the problem of lacking of positive feedback if the restricted rate is already too low. Users sometimes stack in very low slowdown value. With the diff, we add a positive feedback (increasing the slowdown value) if we recover from slowdown state back to normal. To avoid the positive feedback to keep the slowdown value to be to high, we add issue a negative feedback every time we are close to the stop condition. Experiments show it is easier to reach a relative balance than before.
Also increase level0_stop_writes_trigger default from 24 to 32. Since level0_slowdown_writes_trigger default is 20, stop trigger 24 only gives four files as the buffer time to slowdown writes. In order to avoid stop in four files while 20 files have been accumulated, the slowdown value must be very low, which is amost the same as stop. It also doesn't give enough time for the slowdown value to converge. Increase it to 32 will smooth out the system.
Closes https://github.com/facebook/rocksdb/pull/1562
Differential Revision: D4218519
Pulled By: siying
fbshipit-source-id: 95e4088
Summary:
LZ4 1.7.3 emits warnings when calling the deprecated function `LZ4_compress_limitedOutput_continue()`. Starting in r129, LZ4 introduces `LZ4_compress_fast_continue()` as a replacement, and the two functions calls are [exactly equivalent](https://github.com/lz4/lz4/blob/dev/lib/lz4.c#L1408).
Closes https://github.com/facebook/rocksdb/pull/1532
Differential Revision: D4199240
Pulled By: siying
fbshipit-source-id: 138c2bc
Summary:
We should close the fd, before overriding it. This bug was
introduced by f89caa127b
Closes https://github.com/facebook/rocksdb/pull/1553
Differential Revision: D4214101
Pulled By: siying
fbshipit-source-id: 0d65de0
Summary:
- Made RangeDelAggregator's InternalKeyComparator member a reference-to-const so we don't need to copy-construct it. Also added InternalKeyComparator to ImmutableCFOptions so we don't need to construct one for each DBIter.
- Made MemTable::NewRangeTombstoneIterator and the table readers' NewRangeTombstoneIterator() functions return nullptr instead of NewEmptyInternalIterator to avoid the allocation. Updated callers accordingly.
Closes https://github.com/facebook/rocksdb/pull/1548
Differential Revision: D4208169
Pulled By: ajkr
fbshipit-source-id: 2fd65cf
Summary:
When calling StatisticsImpl::HistogramInfo::getMergedHistogram(), if
there is a dying thread, which is calling
ThreadLocalPtr::StaticMeta::OnThreadExit() to merge its thread values to
HistogramInfo, deadlock will occur. Because the former try to hold
merge_lock then ThreadMeta::mutex_, but the later try to hold
ThreadMeta::mutex_ then merge_lock. In short, the locking order isn't
the same.
This patch addressed this issue by releasing merge_lock before folding
thread values.
Closes https://github.com/facebook/rocksdb/pull/1552
Differential Revision: D4211942
Pulled By: ajkr
fbshipit-source-id: ef89bcb
Summary:
Currently, deadlock cycles are held in std::unordered_map. The problem with it is that it allocates/deallocates memory on every insertion/deletion. This limits throughput since we're doing this expensive operation while holding a global mutex. Fix this by using a vector which caches memory instead.
Running the deadlock stress test, this change increased throughput from 39k txns/s -> 49k txns/s. The effect is more noticeable in MyRocks.
Closes https://github.com/facebook/rocksdb/pull/1545
Differential Revision: D4205662
Pulled By: lth
fbshipit-source-id: ff990e4
Summary:
Currently, in the Direct I/O read mode, the last sector of the file, if not full, is not handled correctly. If the return value of pread is not multiplier of kSectorSize, we still go ahead and continue reading, even if the buffer is not aligned. With the commit, if the return value is not multiplier of kSectorSize, and all but the last sector has been read, we simply return.
Closes https://github.com/facebook/rocksdb/pull/1550
Differential Revision: D4209609
Pulled By: lightmark
fbshipit-source-id: cb0b439
Summary:
This patch clarifies the contract of PositionedAppend with some unit
tests and also implements it for PosixWritableFile. (Tasks: 14524071)
Closes https://github.com/facebook/rocksdb/pull/1514
Differential Revision: D4204907
Pulled By: maysamyabandeh
fbshipit-source-id: 06eabd2
Summary:
It is hard to measure acutal memory usage by std containers. Even
providing a custom allocator will miss count some of the usage. Here we
only do a wild guess on its memory usage.
Closes https://github.com/facebook/rocksdb/pull/1511
Differential Revision: D4179945
Pulled By: yiwu-arbug
fbshipit-source-id: 32ab929
Summary:
Currently our skip-list have an optimization to speedup sequential
inserts from a single stream, by remembering the last insert position.
We extend the idea to support sequential inserts from multiple streams,
and even tolerate small reordering wihtin each stream.
This PR is the interface part adding the following:
- Add `memtable_insert_prefix_extractor` to allow specifying prefix for each key.
- Add `InsertWithHint()` interface to memtable, to allow underlying
implementation to return a hint of insert position, which can be later
pass back to optimize inserts.
- Memtable will maintain a map from prefix to hints and pass the hint
via `InsertWithHint()` if `memtable_insert_prefix_extractor` is non-null.
Closes https://github.com/facebook/rocksdb/pull/1419
Differential Revision: D4079367
Pulled By: yiwu-arbug
fbshipit-source-id: 3555326
Summary:
This fixes a correctness issue where ranges with same begin key would overwrite each other.
This diff uses InternalKey as TombstoneMap's key such that all tombstones have unique keys even when their start keys overlap. We also update TombstoneMap to use an internal key comparator.
End-to-end tests pass and are here (https://gist.github.com/ajkr/851ffe4c1b8a15a68d33025be190a7d9) but cannot be included yet since the DeleteRange() API is yet to be checked in. Note both tests failed before this fix.
Closes https://github.com/facebook/rocksdb/pull/1484
Differential Revision: D4155248
Pulled By: ajkr
fbshipit-source-id: 304b4b9
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.
added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456
Differential Revision: D4111271
Pulled By: ajkr
fbshipit-source-id: 6e388d4
Summary:
DB Stats now are truncated if there are too many CFs. Extend the buffer size to allow more to be printed out. Also, separate out malloc to another log line.
Closes https://github.com/facebook/rocksdb/pull/1439
Differential Revision: D4100943
Pulled By: yiwu-arbug
fbshipit-source-id: 79f7218
Summary:
Rocksdb currently has many references to std::map.emplace_back()
which is not implemented in gcc 4.7, but valid in gcc 4.8. Confirmed that
it did not build with gcc 4.7, but builds fine with gcc 4.8
Closes https://github.com/facebook/rocksdb/pull/1272
Differential Revision: D4101385
Pulled By: IslamAbdelRahman
fbshipit-source-id: f6af453
* util/build_verion.cc.in: add this file, so cmake and make can share the
template file for generating util/build_version.cc.
* CMakeLists.txt: also, cmake v2.8.11 does not support file(GENERATE ...),
so we are using configure_file() for creating build_version.cc.
* Makefile: use util/build_verion.cc.in for creating build_version.cc.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Summary: Using real clock causes failures of DBSSTTest.RateLimitedDelete in some cases. Turn away from the real time. Use fake time instead.
Test Plan: Run the tests and all existing tests.
Reviewers: yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65145
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.
Test Plan: make all check -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65121
Summary:
reland https://reviews.facebook.net/D62523
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: sdong, yhchiang
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65211
Summary:
In the current implementation of RateLimiter, the difference
between the configured rate and the actual rate might be more
than 20%, while our test only allows 15% difference. This diff
relaxes the acceptable bias RateLimiterTest::Rate test be 25%
to make the test less flaky.
Test Plan: rate_limiter_test
Reviewers: IslamAbdelRahman, andrewkr, yiwu, lightmark, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64941
Summary: A convience method to atomically get and reset ticker count. I'm wanting to use it to have a thin wrapper to the statistics object to export ticker counts to ODS for LogDevice (since they don't even use fb303).
Test Plan:
test in LogDevice shadow cluster.
https://fburl.com/461868822
Reviewers: andrewkr, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64869
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode
Test Plan:
make check -j64
make release
Reviewers: lightmark, sdong, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64701
Summary:
I saw this exception thrown because sometimes we may resize with -ve value
if we have empty max_bytes_for_level_multiplier_additional vector
Test Plan: run the tests
Reviewers: yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64791
Hello and thank you for RocksDB,
I noticed when using log_write_bench that writes were always 88 bytes:
> strace -e trace=write ./log_write_bench -num_records 2 2>&1 | head -n 2
write(3, "\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371"..., 88) = 88
write(3, "\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371\371"..., 88) = 88
> strace -e trace=write ./log_write_bench -record_size 4096 -num_records 2 2>&1 | head -n 2
write(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 88) = 88
write(3, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 88) = 88
I think this should be:
<< record.assign('X', FLAGS_record_size);
>> record.assign(FLAGS_record_size, 'X');
So fill and not buffer. Otherwise I always see writes of size 88 (the decimal value for chr "X").
string& assign (const char* s, size_t n);
buffer - Copies the first n characters from the array of characters pointed by s.
string& assign (size_t n, char c);
fill - Replaces the current value by n consecutive copies of character c.
perl -le 'print ord "X"'
88
With the change:
> strace -e trace=write ./log_write_bench -record_size 4096 -num_records 2 2>&1 | head -n 2
write(3, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"..., 4096) = 4096
write(3, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"..., 4096) = 4096
> strace -e trace=write ./log_write_bench -num_records 2 2>&1 | head -n 2
write(3, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"..., 249) = 249
write(3, "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"..., 249) = 249
Thanks.
01c27be5fbhttps://reviews.facebook.net/D16239
Summary:
- Update SstFileWriter to include a property for a global sequence number in the SST file `rocksdb.external_sst_file.global_seqno`
- Update TableProperties to be aware of the offset of each property in the file
- Update BlockBasedTableReader and Block to be able to honor the sequence number in `rocksdb.external_sst_file.global_seqno` property and use it to overwrite all sequence number in the file
Something worth mentioning is that we don't update the seqno in the index block since and when doing a binary search, the reason for that is that it's guaranteed that SST files with global seqno will have only one user_key and each key will have seqno=0 encoded in it, This mean that this key is greater than any other key with seqno> 0. That mean that we can actually keep the current logic for these blocks
Test Plan: unit tests
Reviewers: andrewkr, yhchiang, yiwu, sdong
Reviewed By: sdong
Subscribers: hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62523
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()
Also add tests in db_iter_test and db_iterator_test
Pass all tests
Cheers!
Test Plan: make all check -j64
Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64149
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
MyRocks build is broken because they are using "-Werror=missing-field-initializers"
We should fix that by explicitly passing these arguments
Test Plan: Build MyRocks
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64161
Summary: 0.9 can make the test flaky since just found one test fail with 0.88
Test Plan: make all check
Reviewers: sdong, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63939
Summary: EnvPosixTestWithParam.TwoPools relies on explicit sleeping, so it sometimes fail. Fix it.
Test Plan: Run tests with high parallelism many times and make sure the test passes.
Reviewers: yiwu, andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63417
Summary: Add mutable options info into `OptionsTypeInfo` and use it to parse mutable options map. Also support `max_bytes_for_level_multiplier_additional` in option file.
Test Plan: unit test
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63843
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63945
Summary:
Add Env::RandomRWFile in env.h and implement it for POSIX
RandomRWFile is a file that allow us to read from / write to random offsets in the file
I will implement it for other Envs later after finishing the whole task for AddFile()
Test Plan: unit tests
Reviewers: andrewkr, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D62433
Summary:
ZSTD 1.0.0 is coming. We can finally add a support of ZSTD without worrying about compatibility.
Still keep ZSTDNotFinal for compatibility reason.
Test Plan: Run all tests. Run db_bench with ZSTD version with RocksDB built with ZSTD 1.0 and older.
Reviewers: andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: cyan, igor, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63141
