Commit Graph

16 Commits

Author SHA1 Message Date
mrambacher
3dff28cf9b Use SystemClock* instead of std::shared_ptr<SystemClock> in lower level routines (#8033)
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>.  The shared ptr has some performance degradation on certain hardware classes.

For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere.  For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it.  The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.

There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold.  In those cases, the shared pointer was preserved.

Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:

6.17: readrandom   :      28.046 micros/op 854902 ops/sec;   61.3 MB/s (355999 of 355999 found)
6.18: readrandom   :      32.615 micros/op 735306 ops/sec;   52.7 MB/s (290999 of 290999 found)
PR: readrandom   :      27.500 micros/op 871909 ops/sec;   62.5 MB/s (367999 of 367999 found)

(Note that the times for 6.18 are prior to revert of the SystemClock).

Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033

Reviewed By: pdillinger

Differential Revision: D27014563

Pulled By: mrambacher

fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
2021-03-15 04:34:11 -07:00
Zhichao Cao
d1c510baec Handoff checksum Implementation (#7523)
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523

Test Plan: add new unit test, pass make check/ make asan_check

Reviewed By: pdillinger

Differential Revision: D24313271

Pulled By: zhichao-cao

fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
2021-02-10 22:20:32 -08:00
mrambacher
4a09d632c4 Remove Legacy and Custom FileWrapper classes from header files (#7851)
Summary:
Removed the uses of the Legacy FileWrapper classes from the source code.  The wrappers were creating an additional layer of indirection/wrapping, as the Env already has a FileSystem.

Moved the Custom FileWrapper classes into the CustomEnv, as these classes are really for the private use the the CustomEnv class.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7851

Reviewed By: anand1976

Differential Revision: D26114816

Pulled By: mrambacher

fbshipit-source-id: db32840e58d969d3a0fa6c25aaf13d6dcdc74150
2021-01-28 22:10:32 -08:00
mrambacher
12f1137355 Add a SystemClock class to capture the time functions of an Env (#7858)
Summary:
Introduces and uses a SystemClock class to RocksDB.  This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.

Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead.  There are likely more places that can be changed, but this is a start to show what can/should be done.  Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.

There are several Env classes that implement these functions.  Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR.  It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).

Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858

Reviewed By: pdillinger

Differential Revision: D26006406

Pulled By: mrambacher

fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
2021-01-25 22:09:11 -08:00
Akanksha Mahajan
1d226018af In IOTracing, add filename with each operation in trace file. (#7885)
Summary:
1. In IOTracing, add filename with each IOTrace record. Filename is stored in file object (Tracing Wrappers).
         2. Change the logic of figuring out which additional information (file_size,
            length, offset etc) needs to be store with each operation
            which is different for different operations.
            When new information will be added in future (depends on operation),
            this change would make the future additions simple.

Logic: In IOTraceRecord, io_op_data is added and its
         bitwise positions represent which additional information need
         to added in the record from enum IOTraceOp. Values in IOTraceOp represent bitwise positions.
         So if length and offset needs to be stored (IOTraceOp::kIOLen
         is 1 and IOTraceOp::kIOOffset is 2), position 1 and 2 (from rightmost bit) will be set
         and io_op_data will contain 110.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7885

Test Plan: Updated io_tracer_test and verified the trace file manually.

Reviewed By: anand1976

Differential Revision: D25982353

Pulled By: akankshamahajan15

fbshipit-source-id: ebfc5539cc0e231d7794a6b42b73f5403e360b22
2021-01-25 14:37:35 -08:00
Akanksha Mahajan
b175eceb09 Store FSWritableFilePtr object in WritableFileWriter (#7193)
Summary:
Replace FSWritableFile pointer with FSWritableFilePtr
    object in WritableFileWriter.
    This new object wraps FSWritableFile pointer.

    Objective: If tracing is enabled, FSWritableFile Ptr returns
    FSWritableFileTracingWrapper pointer that includes all necessary
    information in IORecord and calls underlying FileSystem and invokes
    IOTracer to dump that record in a binary file. If tracing is disabled
    then, underlying FileSystem pointer is returned directly.
    FSWritableFilePtr wrapper class is added to bypass the
    FSWritableFileWrapper when
    tracing is disabled.

    Test Plan: make check -j64

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7193

Reviewed By: anand1976

Differential Revision: D23355915

Pulled By: akankshamahajan15

fbshipit-source-id: e62a27a13c1fd77e36a6dbafc7006d969bed25cf
2020-09-08 10:56:08 -07:00
Haosen Wen
dbc51adbac Use steady_clock instead of system_clock in FileOperationInfo::TimePoint (#7153)
Summary:
Issue https://github.com/facebook/rocksdb/issues/7133 reported that using `system_clock` in `FileOperationInfo::TimePoint` causes the duration of file flush operation (which can be a noop on MacOS in some scenarios) appears to be 0 and fail an assertion in listener_test. Using `steady_clock` supposedly fixed the problem.
`steady_clock` actually fits better into the use cases of `FileOperationInfo::TimePoint` as all usages care about durations but not wall clock time.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7153

Test Plan: make check.

Reviewed By: riversand963

Differential Revision: D22654136

Pulled By: roghnin

fbshipit-source-id: 5980b1080734bdae496a18071a2c2b5887c67d85
2020-07-22 08:55:02 -07:00
wenh
226d1f9c73 extend listener callback functions to more file I/O operations (#7055)
Summary:
Currently, `EventListener` in listner.h only have callback functions for file read and write. One may favor extended callback functions for more file I/O operations like flush, sync and close. This PR tries to add those interface and have them called when appropriate throughout the code base.

Pull Request resolved: https://github.com/facebook/rocksdb/pull/7055

Test Plan:
Write an experimental listener with those new callback functions with log output in them; run experiments and check logs to see those functions are actually called.
Default test suits `make check` should also be included.

Reviewed By: riversand963

Differential Revision: D22380624

Pulled By: roghnin

fbshipit-source-id: 4121491d45c2c2aae8c255e7998090559a241c6a
2020-07-07 18:21:18 -07:00
Peter Dillinger
c7aedf1b48 Clean up some code related to file checksums (#6861)
Summary:
* Add missing unit test for schema stability of FileChecksumGenCrc32c
  (previously was only comparing to itself)
* A lot of clarifying comments
* Add some assertions for preconditions
* Rename WritableFileWriter::CalculateFileChecksum -> UpdateFileChecksum
* Simplify FileChecksumGenCrc32c with shared functions
* Implement EndianSwapValue to replace unused EndianTransform

And incidentally since I had trouble with 'make check-format' GitHub action disagreeing with local run,
* Output full diagnostic information when 'make check-format' fails in CI
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6861

Test Plan: new unit test passes before & after other changes

Reviewed By: zhichao-cao

Differential Revision: D21667115

Pulled By: pdillinger

fbshipit-source-id: 6a99970f87605aa024fa540c78cd519ff322c3e6
2020-05-21 08:12:51 -07:00
Andrew Kryczka
1c84660457 prototype status check enforcement (#6798)
Summary:
Tried making Status object enforce that it is checked in some way. In cases it is not checked, `PermitUncheckedError()` must be called explicitly.

Added a way to run tests (`ASSERT_STATUS_CHECKED=1 make -j48 check`) on a
whitelist. The effort appears significant to get each test to pass with
this assertion, so I only fixed up enough to get one test (`options_test`)
working and added it to the whitelist.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6798

Reviewed By: pdillinger

Differential Revision: D21377404

Pulled By: ajkr

fbshipit-source-id: 73236f9c8df38f01cf24ecac4a6d1661b72d077e
2020-05-08 12:40:43 -07:00
Zhichao Cao
e8d332d97e Use FileChecksumGenFactory for SST file checksum (#6600)
Summary:
In the current implementation, sst file checksum is calculated by a shared checksum function object, which may make some checksum function hard to be applied here such as SHA1. In this implementation, each sst file will have its own checksum generator obejct, created by FileChecksumGenFactory. User needs to implement its own FilechecksumGenerator and Factory to plugin the in checksum calculation method.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6600

Test Plan: tested with make asan_check

Reviewed By: riversand963

Differential Revision: D20717670

Pulled By: zhichao-cao

fbshipit-source-id: 2a74c1c280ac11a07a1980185b43b671acaa71c6
2020-03-29 15:58:46 -07:00
Zhichao Cao
4246888101 Pass IOStatus to write path and set retryable IO Error as hard error in BG jobs (#6487)
Summary:
In the current code base, we use Status to get and store the returned status from the call. Specifically, for IO related functions, the current Status cannot reflect the IO Error details such as error scope, error retryable attribute, and others. With the implementation of https://github.com/facebook/rocksdb/issues/5761, we have the new Wrapper for IO, which returns IOStatus instead of Status. However, the IOStatus is purged at the lower level of write path and transferred to Status.

The first job of this PR is to pass the IOStatus to the write path (flush, WAL write, and Compaction). The second job is to identify the Retryable IO Error as HardError, and set the bg_error_ as HardError. In this case, the DB Instance becomes read only. User is informed of the Status and need to take actions to deal with it (e.g., call db->Resume()).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6487

Test Plan: Added the testing case to error_handler_fs_test. Pass make asan_check

Reviewed By: anand1976

Differential Revision: D20685017

Pulled By: zhichao-cao

fbshipit-source-id: ff85f042896243abcd6ef37877834e26f36b6eb0
2020-03-27 16:04:43 -07:00
sdong
fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
Zhichao Cao
4369f2c7bb Checksum for each SST file and stores in MANIFEST (#6216)
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.

Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string).  A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216

Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.

Differential Revision: D19171461

Pulled By: zhichao-cao

fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
2020-02-10 15:52:52 -08:00
anand76
afa2420c2b Introduce a new storage specific Env API (#5761)
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.

This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.

The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.

This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.

The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761

Differential Revision: D18868376

Pulled By: anand1976

fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
2019-12-13 14:48:41 -08:00
sdong
b931f84e56 Divide file_reader_writer.h and .cc (#5803)
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803

Test Plan: Build whole project using make and cmake.

Differential Revision: D17374550

fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
2019-09-16 10:33:51 -07:00