Summary:
In some cases, equality comparisons can be done more efficiently than three-way
comparisons. There are quite a few places in the code where we only care about
equality. This patch adds an Equal() method that defaults to using the
Compare() method.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, igor, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46233
Summary: TableCache::Get() puts parameters in the wrong places so that table readers created by Get() will not have the histogram updated.
Test Plan: Will write a unit test for that.
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D46035
Summary:
This patch adds "rocksdb.aggregated-table-properties"
and "rocksdb.aggregated-table-properties-at-levelN", the former
returns the aggreated table properties of a column family,
while the later returns the aggregated table properties
of the specified level N.
Test Plan: Added tests in db_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45087
Summary:
Add a counter of estimated bytes the DB needs to compact for all the compactions to finish. Expose it as a DB Property.
In the future, we can use threshold of this counter to replace soft rate limit and hard rate limit. A single threshold of estimated compaction debt in bytes will be easier for users to reason about when should slow down and stopping than more abstract soft and hard rate limits.
Test Plan: Add unit tests
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44205
Summary: Add a new DB property that calculate the total size of files used by all RocksDB Versions
Test Plan: Unittests for the new property
Reviewers: igor, yhchiang, anthony, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44799
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.
Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected
Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44193
Summary: Add a new option that all LoadTableHandlers to use multiple threads to load files on DB Open and Recover
Test Plan:
make check -j64
COMPILE_WITH_TSAN=1 make check -j64
DISABLE_JEMALLOC=1 make all valgrind_check -j64 (still running)
Reviewers: yhchiang, anthony, rven, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43755
Summary:
Changed compaction_job_test to support better/more thorough
tests and added two tests. Also changed MockFileContents
to order using InternalKeyComparator.
Test Plan: make compaction_job_test && ./compaction_job_test; make all && make check
Reviewers: sdong, rven, igor, yhchiang, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42837
Summary:
UpdateAccumulatedStats() is used to optimize compaction decision
esp. when the number of deletion entries are high, but this function
can slowdown DBOpen esp. in disk environment.
This patch adds DBOptions::skip_sats_update_on_db_open, which skips
UpdateAccumulatedStats() in DB::Open() time when it's set to true.
Test Plan: Add DBCompactionTest.SkipStatsUpdateTest
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42843
Summary:
As of now compactions involving files from Level 0 and Level 1 are single
threaded because the files in L0, although sorted, are not range partitioned like
the other levels. This means that during L0-L1 compaction each file from L1
needs to be merged with potentially all the files from L0.
This attempt to parallelize the L0-L1 compaction assigns a thread and a
corresponding iterator to each L1 file that then considers only the key range
found in that L1 file and only the L0 files that have those keys (and only the
specific portion of those L0 files in which those keys are found). In this way
the overlap is minimized and potentially eliminated between different iterators
focusing on the same files.
The first step is to restructure the compaction logic to break L0-L1 compactions
into multiple, smaller, sequential compactions. Eventually each of these smaller
jobs will be run simultaneously. Areas to pay extra attention to are
# Correct aggregation of compaction job statistics across multiple threads
# Proper opening/closing of output files (make sure each thread's is unique)
# Keys that span multiple L1 files
# Skewed distributions of keys within L0 files
Test Plan: Make and run db_test (newer version has separate compaction tests) and compaction_job_stats_test
Reviewers: igor, noetzli, anthony, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42699
Summary:
Fixes T6548822. Added a new function for estimating the size of the live data
as proposed in the task. The value can be accessed through the property
rocksdb.estimate-live-data-size.
Test Plan:
There are two unit tests in version_set_test and a simple test in db_test.
make version_set_test && ./version_set_test;
make db_test && ./db_test gtest_filter=GetProperty
Reviewers: rven, igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41493
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.
Test Plan: Run all existing unit tests.
Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D42321
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary: Try to allocate LevelFileIteratorState and LevelFileNumIterator from DB iterator's arena, instead of calling malloc and free.
Test Plan: valgrind check
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40929
Summary:
We slow down data into the database to the rate of options.delayed_write_rate (a new option) with this patch.
The thread synchronization approach I take is to still synchronize write controller by DB mutex and GetDelay() is inside DB mutex. Try to minimize the frequency of getting time in GetDelay(). I verified it through db_bench and it seems to work
hard_rate_limit is deprecated.
options.delayed_write_rate is still not dynamically changeable. Need to work on it as a follow-up.
Test Plan: Add new unit tests in db_test
Reviewers: yhchiang, rven, kradhakrishnan, anthony, MarkCallaghan, igor
Reviewed By: igor
Subscribers: ikabiljo, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36351
Summary:
When there are files marked for compaction after compactions, print extra messages to help debugging. Example:
2015/06/08-23:12:55.212855 7ff5013ff700 [default] [JOB 121] Generated table #75: 54 keys, 4807 bytes (need compaction)
2015/06/08-23:12:55.556194 7ff5013ff700 (Original Log Time 2015/06/08-23:12:55.556160) [default] compacted to: base level 1 max bytes base
10240 files[0 1 9 32 12 0 0 0] max score 0.96 (2 files need compaction), MB/sec: 0.0 rd, 0.1 wr, level 2, files in(1, 3) out(5) MB in(0.0,
0.0) out(0.0), read-write-amplify(11.3) write-amplify(5.7) OK, records in: 40, records dropped: 0
Test Plan:
Run test and see LOG files.
valgrind test DBTest.TablePropertiesNeedCompactTest
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: yoshinorim, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39771
Summary:
It is experimental. Allow users to return from a call back function TablePropertiesCollector::NeedCompact(), based on the data in the file.
It can be used to allow users to suggest DB to clear up delete tombstones faster.
Test Plan: Add a unit test.
Reviewers: igor, yhchiang, kradhakrishnan, rven
Reviewed By: rven
Subscribers: yoshinorim, MarkCallaghan, maykov, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39585
Summary:
This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping
The conditions for trivial move have been updated
Introduced conditions:
- Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual)
- Input level files cannot be overlapping
Removed conditions:
- Trivial move only run when the compaction is not manual
- Input level should can contain only 1 file
More context on what tests failed because of Trivial move
```
DBTest.CompactionsGenerateMultipleFiles
This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1
```
```
DBTest.NoSpaceCompactRange
This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation
because trivial move does not need any extra space, and did not check for that
```
```
DBTest.DropWrites
Similar to DBTest.NoSpaceCompactRange
```
```
DBTest.DeleteObsoleteFilesPendingOutputs
This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3
```
```
CuckooTableDBTest.CompactionIntoMultipleFiles
Same as DBTest.CompactionsGenerateMultipleFiles
```
This diff is based on a work by @sdong https://reviews.facebook.net/D34149
Test Plan: make -j64 check
Reviewers: rven, sdong, igor
Reviewed By: igor
Subscribers: yhchiang, ott, march, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D34797
Summary: In DB::CompactRange(), change parameter "reduce_level" to "change_level". Users can compact all data to the last level if needed. By doing it, users can migrate the DB to options.level_compaction_dynamic_level_bytes=true.
Test Plan: Add a unit test for it.
Reviewers: yhchiang, anthony, kradhakrishnan, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39099
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary:
Compaction now boosts the size of deletion entries of a file only when
the number of deletion entries is greater than the number of non-deletion
entries in the file. The motivation here is that in a stable workload,
the number of deletion entries should be roughly equal to the number of
non-deletion entries. If we compensate the size of deletion entries in a
stable workload, the deletion compensation logic might introduce unwanted
effet which changes the shape of LSM tree.
Test Plan: db_test --gtest_filter="*Deletion*"
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38703
Summary:
This turns out to be pretty bad because if we prioritize L0->L1 then L1 can grow artificially large, which makes L0->L1 more and more expensive. For example:
256MB @ L0 + 256MB @ L1 --> 512MB @ L1
256MB @ L0 + 512MB @ L1 --> 768MB @ L1
256MB @ L0 + 768MB @ L1 --> 1GB @ L1
....
256MB @ L0 + 10GB @ L1 --> 10.2GB @ L1
At some point we need to start compacting L1->L2 to speed up L0->L1.
Test Plan:
The performance improvement is massive for heavy write workload. This is the benchmark I ran: https://phabricator.fb.com/P19842671. Before this change, the benchmark took 47 minutes to complete. After, the benchmark finished in 2minutes. You can see full results here: https://phabricator.fb.com/P19842674
Also, we ran this diff on MongoDB on RocksDB on one replicaset. Before the change, our initial sync was so slow that it couldn't keep up with primary writes. After the change, the import finished without any issues
Reviewers: dynamike, MarkCallaghan, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38637
Summary:
CPU profiling reveals GetApproximateSizes as a bottleneck for performance. The current implementation is sub-optimal, it scans every file in every level to compute the result.
We can take advantage of the fact that all levels above 0 are sorted in the increasing order of key ranges and use binary search to locate the starting index. This can reduce the number of comparisons required to compute the result.
Test Plan: We have good test coverage. Run the tests.
Reviewers: sdong, igor, rven, dynamike
Subscribers: dynamike, maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37755
Summary:
Based on feedback from D37083.
Are all of these correct? In some spaces it seems like we're doing SetMaxPossibleForUserKey() although we want the smallest possible internal key for user key.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37341
Summary: Add more logging to help debugging issues.
Test Plan: Run test suites
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D37401
Summary:
Some Mongo+Rocks datasets in Parse's environment are not doing compactions very frequently. During the quiet period (with no IO), we'd like to schedule compactions so that our reads become faster. Also, aggressively compacting during quiet periods helps when write bursts happen. In addition, we also want to compact files that are containing deleted key ranges (like old oplog keys).
All of this is currently not possible with CompactRange() because it's single-threaded and blocks all other compactions from happening. Running CompactRange() risks an issue of blocking writes because we generate too much Level 0 files before the compaction is over. Stopping writes is very dangerous because they hold transaction locks. We tried running manual compaction once on Mongo+Rocks and everything fell apart.
MarkForCompaction() solves all of those problems. This is very light-weight manual compaction. It is lower priority than automatic compactions, which means it shouldn't interfere with background process keeping the LSM tree clean. However, if no automatic compactions need to be run (or we have extra background threads available), we will start compacting files that are marked for compaction.
Test Plan: added a new unit test
Reviewers: yhchiang, rven, MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37083
Summary:
If accumulated_num_non_deletions_ were ever smaller than
accumulated_num_deletions_, the computation of
"accumulated_num_non_deletions_ - accumulated_num_deletions_"
would result in a logically "negative" value, but since
the two operands are unsigned (uint64_t), the result corresponding
to e.g., -1 would 2^64-1.
Instead, return 0 in that case.
Test Plan:
- ensure "make check" still passes
- temporarily add an "abort();" call in the new "if"-block, and
observe that it fails in some test cases. However, note that
this case is triggered only when the two numbers are equal.
Thus, no test case triggers the erroneous behavior this
change is designed to avoid. If anyone can construct a
scenario in which that bug would be triggered, I'll be
happy to add a test case.
Reviewers: ljin, igor, rven, igor.sugak, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36489
Summary: Int is used for level size targets when options_.level_compaction_dynamic_level_bytes=true, which will cause overflow when database grows big. Fix it.
Test Plan: Add a new unit test which fails without the fix.
Reviewers: rven, yhchiang, MarkCallaghan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D36453
Summary:
With this change, we use L1 and up to store compaction outputs in universal compaction.
The compaction pick logic stays the same. Outputs are stored in the largest "level" as possible.
If options.num_levels=1, it behaves all the same as now.
Test Plan:
1) convert most of existing unit tests for universal comapaction to include the option of one level and multiple levels.
2) add a unit test to cover parallel compaction in universal compaction and run it in one level and multiple levels
3) add unit test to migrate from multiple level setting back to one level setting
4) add a unit test to insert keys to trigger multiple rounds of compactions and verify results.
Reviewers: rven, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: meyering, leveldb, MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D34539
Summary:
We have addded new stats and perf_context for measuring the merge and filter operation time consumption.
We have bounded all the merge operations within the GUARD statment and collected the total time for these operations in the DB.
Test Plan: WIP
Reviewers: rven, yhchiang, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34377
Summary:
To understand the bug read t5943287 and check out the new test in column_family_test (ReadDroppedColumnFamily), iter 0.
RocksDB contract allowes you to read a drop column family as long as there is a live reference. However, since our iteration ignores dropped column families, AddLiveFiles() didn't mark files of a dropped column families as live. So we deleted them.
In this patch I no longer ignore dropped column families in the iteration. I think this behavior was confusing and it also led to this bug. Now if an iterator client wants to ignore dropped column families, he needs to do it explicitly.
Test Plan: Added a new unit test that is failing on master. Unit test succeeds now.
Reviewers: sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32535
Summary: It is no longer used by the implementation, so we should also remove it from the public API.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34971
Summary:
When having fixed max_bytes_for_level_base, the ratio of size of largest level and the second one can range from 0 to the multiplier. This makes LSM tree frequently irregular and unpredictable. It can also cause poor space amplification in some cases.
In this improvement (proposed by Igor Kabiljo), we introduce a parameter option.level_compaction_use_dynamic_max_bytes. When turning it on, RocksDB is free to pick a level base in the range of (options.max_bytes_for_level_base/options.max_bytes_for_level_multiplier, options.max_bytes_for_level_base] so that real level ratios are close to options.max_bytes_for_level_multiplier.
Test Plan: New unit tests and pass tests suites including valgrind.
Reviewers: MarkCallaghan, rven, yhchiang, igor, ikabiljo
Reviewed By: ikabiljo
Subscribers: yoshinorim, ikabiljo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31437
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary:
Remove some always-true assertions.
They provoke these compilation failures:
table/plain_table_key_coding.cc:279:20: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
db/version_set.cc:336:15: error: comparison of unsigned expression >= 0 is always true [-Werror=type-limits]
* table/plain_table_key_coding.cc (rocksdb): Remove assertion that
unsigned type variable is >= 0.
* db/version_set.cc (DoGenerateLevelFilesBrief): Likewise.
Test Plan:
Run "make EXTRA_CXXFLAGS='-W -Wextra'" and see fewer errors.
Reviewers: ljin, sdong, igor.sugak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33747
Summary: Add a DB property about live versions. It can be helpful to figure out whether there are files not live but not yet deleted, in some use cases.
Test Plan: make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33327
Summary: For description of the bug, see comment in db_test. The fix is pretty straight forward.
Test Plan: added unit test. eventually we need better testing of FOF/POF process.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33081
Summary:
- In statistics.h , added tickers.
- In version_set.cc,
-- Added a getter method for hit_file_level_ in the class FilePicker
-- Added a line in the Get() method in case of a found, increment the corresponding counters based on the level of the file respectively.
Corresponding task: https://our.intern.facebook.com/intern/tasks/?s=506100481&t=5952818
Personal fork: 0c3f2e3600
Test Plan:
In terminal,
```
make -j32 db_test
ROCKSDB_TESTS=L0L1L2AndUpHitCounter ./db_test
```
Or to use debugger,
```
make -j32 db_test
export ROCKSDB_TESTS=L0L1L2AndUpHitCounter
gdb db_test
```
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D32205
Summary:
This diff basically reverts D30249 and also adds a unit test that was failing before this patch.
I have no idea how I didn't catch this terrible bug when writing a diff, sorry about that :(
I think we should redesign our system of keeping track of and deleting files. This is already a second bug in this critical piece of code. I'll think of few ideas.
BTW this diff is also a regression when running lots of column families. I plan to revisit this separately.
Test Plan: added a unit test
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33045
Summary:
Add a counter for collecting the wait time on db mutex.
Also add MutexWrapper and CondVarWrapper for measuring wait time.
Test Plan:
./db_test
export ROCKSDB_TESTS=MutexWaitStats
./db_test
verify stats output using db_bench
make clean
make release
./db_bench --statistics=1 --benchmarks=fillseq,readwhilewriting --num=10000 --threads=10
Sample output:
rocksdb.db.mutex.wait.micros COUNT : 7546866
Reviewers: MarkCallaghan, rven, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32787
Summary: Added requirement that ComputeCompactionScore() be executed in mutex, since it's accessing being_compacted bool, which can be mutated by other threads. Also added more comments about thread safety of FileMetaData, since it was a bit confusing. However, it seems that FileMetaData doesn't have data races (except being_compacted)
Test Plan: Ran 100 ConvertCompactionStyle tests with thread sanitizer. On master -- some failures. With this patch -- none.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32283
Summary: Now we don't sync manifest file when initializing it, so DB cannot be safely reopened before the first mem table flush. Fix it by syncing it. This fixes fault_injection_test.
Test Plan: make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32001
Test Plan: Compile. Run it.
Reviewers: yhchiang, dhruba, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D31479
Summary: Add an extra assert to make sure current version is included in VersionSet::AddLiveFiles().
Test Plan: make all check
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, hermanlee4, leveldb
Differential Revision: https://reviews.facebook.net/D30819
