Summary:
* Checksums are now checked on meta blocks unless specifically
suppressed or not applicable (e.g. plain table). (Was other way around.)
This means a number of cases that were not checking checksums now are,
including direct read TableProperties in Version::GetTableProperties
(fixed in meta_blocks ReadTableProperties), reading any block from
PersistentCache (fixed in BlockFetcher), read TableProperties in
SstFileDumper (ldb/sst_dump/BackupEngine) before table reader open,
maybe more.
* For that to work, I moved the global_seqno+TableProperties checksum
logic to the shared table/ code, because that is used by many utilies
such as SstFileDumper.
* Also for that to work, we have to know when we're dealing with a block
that has a checksum (trailer), so added that capability to Footer based
on magic number, and from there BlockFetcher.
* Knowledge of trailer presence has also fixed a problem where other
table formats were reading blocks including bytes for a non-existant
trailer--and awkwardly kind-of not using them, e.g. no shared code
checking checksums. (BlockFetcher compression type was populated
incorrectly.) Now we only read what is needed.
* Minimized code duplication and differing/incompatible/awkward
abstractions in meta_blocks.{cc,h} (e.g. SeekTo in metaindex block
without parsing block handle)
* Moved some meta block handling code from table_properties*.*
* Moved some code specific to block-based table from shared table/ code
to BlockBasedTable class. The checksum stuff means we can't completely
separate it, but things that don't need to be in shared table/ code
should not be.
* Use unique_ptr rather than raw ptr in more places. (Note: you can
std::move from unique_ptr to shared_ptr.)
Without enhancements to GetPropertiesOfAllTablesTest (see below),
net reduction of roughly 100 lines of code.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9163
Test Plan:
existing tests and
* Enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to verify that
checksums are now checked on direct read of table properties by TableCache
(new test would fail before this change)
* Also enhanced DBTablePropertiesTest.GetPropertiesOfAllTablesTest to test
putting table properties under old meta name
* Also generally enhanced that same test to actually test what it was
supposed to be testing already, by kicking things out of table cache when
we don't want them there.
Reviewed By: ajkr, mrambacher
Differential Revision: D32514757
Pulled By: pdillinger
fbshipit-source-id: 507964b9311d186ae8d1131182290cbd97a99fa9
Summary:
* New public header unique_id.h and function GetUniqueIdFromTableProperties
which computes a universally unique identifier based on table properties
of table files from recent RocksDB versions.
* Generation of DB session IDs is refactored so that they are
guaranteed unique in the lifetime of a process running RocksDB.
(SemiStructuredUniqueIdGen, new test included.) Along with file numbers,
this enables SST unique IDs to be guaranteed unique among SSTs generated
in a single process, and "better than random" between processes.
See https://github.com/pdillinger/unique_id
* In addition to public API producing 'external' unique IDs, there is a function
for producing 'internal' unique IDs, with functions for converting between the
two. In short, the external ID is "safe" for things people might do with it, and
the internal ID enables more "power user" features for the future. Specifically,
the external ID goes through a hashing layer so that any subset of bits in the
external ID can be used as a hash of the full ID, while also preserving
uniqueness guarantees in the first 128 bits (bijective both on first 128 bits
and on full 192 bits).
Intended follow-up:
* Use the internal unique IDs in cache keys. (Avoid conflicts with https://github.com/facebook/rocksdb/issues/8912) (The file offset can be XORed into
the third 64-bit value of the unique ID.)
* Publish the external unique IDs in FileStorageInfo (https://github.com/facebook/rocksdb/issues/8968)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8990
Test Plan:
Unit tests added, and checking of unique ids in stress test.
NOTE in stress test we do not generate nearly enough files to thoroughly
stress uniqueness, but the test trims off pieces of the ID to check for
uniqueness so that we can infer (with some assumptions) stronger
properties in the aggregate.
Reviewed By: zhichao-cao, mrambacher
Differential Revision: D31582865
Pulled By: pdillinger
fbshipit-source-id: 1f620c4c86af9abe2a8d177b9ccf2ad2b9f48243
Summary:
I very recently realized that with https://github.com/facebook/rocksdb/issues/8669 we cannot later add
file numbers to external SST files (so that more can share db session
ids for better uniqueness properties), because of forward compatibility.
We would have a version of RocksDB that assumes session IDs are unique
on external SST files and therefore can't really break that invariant in
future files.
This change adds a table property for "orig_file_number" which is
populated by normal SST files and also external SST files generated by
SstFileWriter. SstFileWriter now keeps a db_session_id for life of the
object and increments its own file numbers for embedding in table
properties. (They are arguably "fake" file numbers because these numbers
and not embedded in the file name.)
While updating block_based_table_builder, I removed several unnecessary
fields from Rep, because following the pattern would have created
another unnecessary field.
This change also updates block_based_table_reader to use this new
property when available, which means that for newer SST files, we can
determine the stable/original <db_session_id,file_number> unique
identifier using just the file contents, not the file name. (It's a bit
complicated; detailed comments in block_based_table_reader.)
Also added DB host id to properties listing by sst_dump, which could be
useful in debugging.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8686
Test Plan: majorly overhauled StableCacheKeys test for this change
Reviewed By: zhichao-cao
Differential Revision: D30457742
Pulled By: pdillinger
fbshipit-source-id: 2e5ae7dddeb94fb9d8eac8a928486aed8b8cd445
Summary:
With Ribbon filter work and possible variance in actual bits
per key (or prefix; general term "entry") to achieve certain FP rates,
I've received a request to be able to track actual bits per key in
generated filters. This change adds a num_filter_entries table
property, which can be combined with filter_size to get bits per key
(entry).
This can vary from num_entries in at least these ways:
* Different versions of same key are only counted once in filters.
* With prefix filters, several user keys map to the same filter entry.
* A single filter can include both prefixes and user keys.
Note that FilterBlockBuilder::NumAdded() didn't do anything useful
except distinguish empty from non-empty.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8323
Test Plan: basic unit test included, others updated
Reviewed By: jay-zhuang
Differential Revision: D28596210
Pulled By: pdillinger
fbshipit-source-id: 529a111f3c84501e5a470bc84705e436ee68c376
Summary:
Added `TableProperties::{fast,slow}_compression_estimated_data_size`.
These properties are present in block-based tables when
`ColumnFamilyOptions::sample_for_compression > 0` and the necessary
compression library is supported when the file is generated. They
contain estimates of what `TableProperties::data_size` would be if the
"fast"/"slow" compression library had been used instead. One
limitation is we do not record exactly which "fast" (ZSTD or Zlib)
or "slow" (LZ4 or Snappy) compression library produced the result.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8139
Test Plan:
- new unit test
- ran `db_bench` with `sample_for_compression=1`; verified the `data_size` property matches the `{slow,fast}_compression_estimated_data_size` when the same compression type is used for the output file compression and the sampled compression
Reviewed By: riversand963
Differential Revision: D27454338
Pulled By: ajkr
fbshipit-source-id: 9529293de93ddac7f03b2e149d746e9f634abac4
Summary:
So that we can more easily get aggregate live table data such
as total filter, index, and data sizes.
Also adds ldb support for getting properties
Also fixed some missing/inaccurate related comments in db.h
For example:
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties
rocksdb.aggregated-table-properties.data_size: 102871
rocksdb.aggregated-table-properties.filter_size: 0
rocksdb.aggregated-table-properties.index_partitions: 0
rocksdb.aggregated-table-properties.index_size: 2232
rocksdb.aggregated-table-properties.num_data_blocks: 100
rocksdb.aggregated-table-properties.num_deletions: 0
rocksdb.aggregated-table-properties.num_entries: 15000
rocksdb.aggregated-table-properties.num_merge_operands: 0
rocksdb.aggregated-table-properties.num_range_deletions: 0
rocksdb.aggregated-table-properties.raw_key_size: 288890
rocksdb.aggregated-table-properties.raw_value_size: 198890
rocksdb.aggregated-table-properties.top_level_index_size: 0
$ ./ldb --db=testdb get_property rocksdb.aggregated-table-properties-at-level1
rocksdb.aggregated-table-properties-at-level1.data_size: 80909
rocksdb.aggregated-table-properties-at-level1.filter_size: 0
rocksdb.aggregated-table-properties-at-level1.index_partitions: 0
rocksdb.aggregated-table-properties-at-level1.index_size: 1787
rocksdb.aggregated-table-properties-at-level1.num_data_blocks: 81
rocksdb.aggregated-table-properties-at-level1.num_deletions: 0
rocksdb.aggregated-table-properties-at-level1.num_entries: 12466
rocksdb.aggregated-table-properties-at-level1.num_merge_operands: 0
rocksdb.aggregated-table-properties-at-level1.num_range_deletions: 0
rocksdb.aggregated-table-properties-at-level1.raw_key_size: 238210
rocksdb.aggregated-table-properties-at-level1.raw_value_size: 163414
rocksdb.aggregated-table-properties-at-level1.top_level_index_size: 0
$
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7779
Test Plan: Added a test to ldb_test.py
Reviewed By: jay-zhuang
Differential Revision: D25653103
Pulled By: pdillinger
fbshipit-source-id: 2905469a08a64dd6b5510cbd7be2e64d3234d6d3
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
`db_id` and `db_session_id` are now part of the table properties for all formats and stored in SST files. This adds about 99 bytes to each new SST file.
The `TablePropertiesNames` for these two identifiers are `rocksdb.creating.db.identity` and `rocksdb.creating.session.identity`.
In addition, SST files generated from SstFileWriter and Repairer have DB identity “SST Writer” and “DB Repairer”, respectively. Their DB session IDs are generated in the same way as `DB::GetDbSessionId`.
A table property test is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6983
Test Plan: make check and some manual tests.
Reviewed By: zhichao-cao
Differential Revision: D22048826
Pulled By: gg814
fbshipit-source-id: afdf8c11424a6f509b5c0b06dafad584a80103c9
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
Summary:
Since we are planning to use dictionary compression and to use different compression level, it is quite useful to add compression options to TableProperties. For example, in MyRocks, if the feature is available, we can query from information_schema.rocksdb_sst_props to see if all sst files are converted to ZSTD dictionary compressions. Resolves https://github.com/facebook/rocksdb/issues/4992
With this PR, user can query table properties through `GetPropertiesOfAllTables` API and get compression options as std::string:
`window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0;`
or table_properties->ToString() will also contain it
`# data blocks=1; # entries=13; # deletions=0; # merge operands=0; # range deletions=0; raw key size=143; raw average key size=11.000000; raw value size=39; raw average value size=3.000000; data block size=120; index block size (user-key? 0, delta-value? 0)=27; filter block size=0; (estimated) table size=147; filter policy name=N/A; prefix extractor name=nullptr; column family ID=0; column family name=default; comparator name=leveldb.BytewiseComparator; merge operator name=nullptr; property collectors names=[]; SST file compression algo=Snappy; SST file compression options=window_bits=-14; level=32767; strategy=0; max_dict_bytes=0; zstd_max_train_bytes=0; enabled=0; ; creation time=1552946632; time stamp of earliest key=1552946632;`
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5081
Differential Revision: D14716692
Pulled By: miasantreble
fbshipit-source-id: 7d2f2cf84e052bff876e71b4212cfdebf5be32dd
Summary:
Since the number of range deletions are reported in
TableProperties, it is confusing to not report the number of merge
operands and point deletions as top-level properties; they are
accessible through the public API, but since they are not the "main"
properties, they do not appear in aggregated table properties, or the
string representation of table properties.
This change promotes those two property keys to
`rocksdb/table_properties.h`, adds corresponding uint64 members for
them, deprecates the old access methods `GetDeletedKeys()` and
`GetMergeOperands()` (though they are still usable for now), and removes
`InternalKeyPropertiesCollector`. The property key strings are the same
as before this change, so this should be able to read DBs written from older
versions (though I haven't tested this yet).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4594
Differential Revision: D12826893
Pulled By: abhimadan
fbshipit-source-id: 9e4e4fbdc5b0da161c89582566d184101ba8eb68
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
Add a new table property, rocksdb.num.range-deletions, which tracks the
number of range deletions in a block-based table. Range deletions are no
longer counted in rocksdb.num.entries; as discovered in PR #3778, there
are various code paths that implicitly assume that rocksdb.num.entries
counts only true keys, not range deletions.
/cc ajkr nvanbenschoten
Closes https://github.com/facebook/rocksdb/pull/4016
Differential Revision: D8527575
Pulled By: ajkr
fbshipit-source-id: 92e7edbe78fda53756a558013c9fb496e7764fd7
Summary:
Index blocks have the same format as data blocks. The keys therefore similarly to the keys in the data blocks are internal keys, which means that in addition to the user key it also has 8 bytes that encodes sequence number and value type. This extra 8 bytes however is not necessary in index blocks since the index keys act as an separator between two data blocks. The only exception is when the last key of a block and the first key of the next block share the same user key, in which the sequence number is required to act as a separator.
The patch excludes the sequence from index keys only if the above special case does not happen for any of the index keys. It then records that in the property block. The reader looks at the property block to see if it should expect sequence numbers in the keys of the index block.s
Closes https://github.com/facebook/rocksdb/pull/3894
Differential Revision: D8118775
Pulled By: maysamyabandeh
fbshipit-source-id: 915479f028b5799ca91671d67455ecdefbd873bd
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
Re-use metadata for reading Compression Dictionary on BlockBased
table open, this saves two reads from disk.
This helps to our 999 percentile in 5.6.1 where prefetch buffer is not present.
Closes https://github.com/facebook/rocksdb/pull/3354
Differential Revision: D6695753
Pulled By: ajkr
fbshipit-source-id: bb8acd9e9e66e65b89c548ab8940570ae360333c
Summary:
With FIFO compaction we would like to get the oldest data time for monitoring. The problem is we don't have timestamp for each key in the DB. As an approximation, we expose the earliest of sst file "creation_time" property.
My plan is to override the property with a more accurate value with blob db, where we actually have timestamp.
Closes https://github.com/facebook/rocksdb/pull/2842
Differential Revision: D5770600
Pulled By: yiwu-arbug
fbshipit-source-id: 03833c8f10bbfbee62f8ea5c0d03c0cafb5d853a
Summary:
Introducing FIFO compactions with TTL.
FIFO compaction is based on size only which makes it tricky to enable in production as use cases can have organic growth. A user requested an option to drop files based on the time of their creation instead of the total size.
To address that request:
- Added a new TTL option to FIFO compaction options.
- Updated FIFO compaction score to take TTL into consideration.
- Added a new table property, creation_time, to keep track of when the SST file is created.
- Creation_time is set as below:
- On Flush: Set to the time of flush.
- On Compaction: Set to the max creation_time of all the files involved in the compaction.
- On Repair and Recovery: Set to the time of repair/recovery.
- Old files created prior to this code change will have a creation_time of 0.
- FIFO compaction with TTL is enabled when ttl > 0. All files older than ttl will be deleted during compaction. i.e. `if (file.creation_time < (current_time - ttl)) then delete(file)`. This will enable cases where you might want to delete all files older than, say, 1 day.
- FIFO compaction will fall back to the prior way of deleting files based on size if:
- the creation_time of all files involved in compaction is 0.
- the total size (of all SST files combined) does not drop below `compaction_options_fifo.max_table_files_size` even if the files older than ttl are deleted.
This feature is not supported if max_open_files != -1 or with table formats other than Block-based.
**Test Plan:**
Added tests.
**Benchmark results:**
Base: FIFO with max size: 100MB ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100
readwhilewriting : 1.924 micros/op 519858 ops/sec; 13.6 MB/s (1176277 of 5000000 found)
```
With TTL (a low one for testing) ::
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ TEST_TMPDIR=/dev/shm ./db_bench --benchmarks=readwhilewriting --num=5000000 --threads=16 --compaction_style=2 --fifo_compaction_max_table_files_size_mb=100 --fifo_compaction_ttl=20
readwhilewriting : 1.902 micros/op 525817 ops/sec; 13.7 MB/s (1185057 of 5000000 found)
```
Example Log lines:
```
2017/06/26-15:17:24.609249 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609177) [db/compaction_picker.cc:1471] [default] FIFO compaction: picking file 40 with creation time 1498515423 for deletion
2017/06/26-15:17:24.609255 7fd5a45ff700 (Original Log Time 2017/06/26-15:17:24.609234) [db/db_impl_compaction_flush.cc:1541] [default] Deleted 1 files
...
2017/06/26-15:17:25.553185 7fd5a61a5800 [DEBUG] [db/db_impl_files.cc:309] [JOB 0] Delete /dev/shm/dbbench/000040.sst type=2 #40 -- OK
2017/06/26-15:17:25.553205 7fd5a61a5800 EVENT_LOG_v1 {"time_micros": 1498515445553199, "job": 0, "event": "table_file_deletion", "file_number": 40}
```
SST Files remaining in the dbbench dir, after db_bench execution completed:
```
svemuri@dev15905 ~/rocksdb (fifo-compaction) $ ls -l /dev/shm//dbbench/*.sst
-rw-r--r--. 1 svemuri users 30749887 Jun 26 15:17 /dev/shm//dbbench/000042.sst
-rw-r--r--. 1 svemuri users 30768779 Jun 26 15:17 /dev/shm//dbbench/000044.sst
-rw-r--r--. 1 svemuri users 30757481 Jun 26 15:17 /dev/shm//dbbench/000046.sst
```
Closes https://github.com/facebook/rocksdb/pull/2480
Differential Revision: D5305116
Pulled By: sagar0
fbshipit-source-id: 3e5cfcf5dd07ed2211b5b37492eb235b45139174
Summary:
When Partitioning index/filter is enabled the user might need to check the index block size as well as the top-level index size via sst_dump. This patch records i) number of partitions, ii) top-level index size and make it accessible through sst_dump. The number of partitions for filters is the same as that of indexes. The top-level index for filters has a similar size to top-level index for indexes, so it is not repeated.
Closes https://github.com/facebook/rocksdb/pull/2437
Differential Revision: D5224225
Pulled By: maysamyabandeh
fbshipit-source-id: 5324598c75793523aef1bb7ee225a5475e95a9cb
Summary:
This handles two issues: (1) range deletion iterator sometimes outlives
the table reader that created it, in which case the block must not be destroyed
during table reader destruction; and (2) we prefer to read these range tombstone
meta-blocks from file fewer times.
- Extracted cache-populating logic from NewDataBlockIterator() into a separate function: MaybeLoadDataBlockToCache()
- Use MaybeLoadDataBlockToCache() to load range deletion meta-block and pin it through the reader's lifetime. This code reuse works since range deletion meta-block has same format as data blocks.
- Use NewDataBlockIterator() to create range deletion iterators, which uses block cache if enabled, otherwise reads the block from file. Either way, the underlying block won't disappear until after the iterator is destroyed.
Closes https://github.com/facebook/rocksdb/pull/1459
Differential Revision: D4123175
Pulled By: ajkr
fbshipit-source-id: 8f64281
Summary:
Make sure prefix extractor name is stored in SST files and if DB is opened with a prefix extractor of a different name, prefix bloom is skipped when read the file.
Also add unit tests for that.
Test Plan:
before change:
```
Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from BlockBasedTableTest
[ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter
table/table_test.cc:1421: Failure
Value of: db_iter->Valid()
Actual: false
Expected: true
[ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter (1 ms)
[----------] 1 test from BlockBasedTableTest (1 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (1 ms total)
[ PASSED ] 0 tests.
[ FAILED ] 1 test, listed below:
[ FAILED ] BlockBasedTableTest.SkipPrefixBloomFilter
1 FAILED TEST
```
after:
```
Note: Google Test filter = BlockBasedTableTest.SkipPrefixBloomFilter
[==========] Running 1 test from 1 test case.
[----------] Global test environment set-up.
[----------] 1 test from BlockBasedTableTest
[ RUN ] BlockBasedTableTest.SkipPrefixBloomFilter
[ OK ] BlockBasedTableTest.SkipPrefixBloomFilter (0 ms)
[----------] 1 test from BlockBasedTableTest (0 ms total)
[----------] Global test environment tear-down
[==========] 1 test from 1 test case ran. (0 ms total)
[ PASSED ] 1 test.
```
Reviewers: sdong, andrewkr, yiwu, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61215
Summary: 1. Range Deletion Tombstone structure 2. Modify Add() in table_builder to make it usable for adding range del tombstones 3. Expose NewTombstoneIterator() API in table_reader
Test Plan: table_test.cc (now BlockBasedTableBuilder::Add() only accepts InternalKey. I make table_test only pass InternalKey to BlockBasedTableBuidler. Also test writing/reading range deletion tombstones in table_test )
Reviewers: sdong, IslamAbdelRahman, lightmark, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61473
Summary: Store SST file compression algorithm as a TableProperty.
Test Plan: Modified and ran the table_test UT that checks for TableProperties
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: lgalanis, andrewkr, dhruba, IslamAbdelRahman
Differential Revision: https://reviews.facebook.net/D58017
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary:
This is the original diff that I have landed and reverted and now I want to land again https://reviews.facebook.net/D34269
For old SST files we will show
```
comparator name: N/A
merge operator name: N/A
property collectors names: N/A
```
For new SST files with no merge operator name and with no property collectors
```
comparator name: leveldb.BytewiseComparator
merge operator name: nullptr
property collectors names: []
```
for new SST files with these properties
```
comparator name: leveldb.BytewiseComparator
merge operator name: UInt64AddOperator
property collectors names: [DummyPropertiesCollector1,DummyPropertiesCollector2]
```
Test Plan: unittests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56487
Summary:
Added the column family name to the properties block. This property
is omitted only if the property is unavailable, such as when RepairDB()
writes SST files.
In a next diff, I will change RepairDB to use this new property for
deciding to which column family an existing SST file belongs. If this
property is missing, it will add it to the "unknown" column family (same
as its existing behavior).
Test Plan:
New unit test:
$ ./db_table_properties_test --gtest_filter=DBTablePropertiesTest.GetColumnFamilyNameProperty
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55605
Summary:
Reverting https://reviews.facebook.net/D34269 for now
after I landed it a flaky test started continuously failing, I am almost sure this patch is not related to the test but I will revert it until I figure out why it's failing
Test Plan: make check
Reviewers: kradhakrishnan
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D50385
Summary:
This diff introduce new table properties that will be written for block based tables
These properties are
- comparator name
- merge operator name
- property collectors names
Test Plan:
- Added a new unit test to verify that these tests are written/read correctly
- Running all other tests right now (wont land until all tests finish)
Reviewers: rven, kradhakrishnan, igor, sdong, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34269
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary:
This patch adds "rocksdb.aggregated-table-properties"
and "rocksdb.aggregated-table-properties-at-levelN", the former
returns the aggreated table properties of a column family,
while the later returns the aggregated table properties
of the specified level N.
Test Plan: Added tests in db_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45087
Summary:
In some environment such as android, the c++ library does not have
std::to_string. This path adds rocksdb::ToString(), which wraps std::to_string
when std::to_string is not available, and implements std::to_string
in the other case.
Test Plan:
make dbg -j32
./db_test
make clean
make dbg OPT=-DOS_ANDROID -j32
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29181
Summary: So iOS size_t is 32-bit, so we need to static_cast<size_t> any uint64_t :(
Test Plan: TARGET_OS=IOS make static_lib
Reviewers: dhruba, ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28743
Summary:
From 2.6 to 2.7, property block name is renamed from rocksdb.stats to rocksdb.properties. Older properties were not able to be loaded. In 2.8, we seem to have added some logic that uses property block without checking null pointers, which create segment faults.
In this patch, we fix it by:
(1) try rocksdb.stats if rocksdb.properties is not found
(2) add some null checking before consuming rep->table_properties
Test Plan: make sure a file generated in 2.7 couldn't be opened now can be opened.
Reviewers: haobo, igor, yhchiang
Reviewed By: igor
CC: ljin, xjin, dhruba, kailiu, leveldb
Differential Revision: https://reviews.facebook.net/D17961
Summary:
This diff enables the command line tool `sst_dump` to work for sst files
under plain table format. Changes include:
* In tools/sst_dump.cc:
- add support for plain table format
- display prefix_extractor information when --show_properties is on
* In table/format.cc
- Now the table magic number of a Footer can be later initialized
via ReadFooterFromFile().
* In table/meta_bocks:
- add function ReadTableMagicNumber() that reads the magic number of
the specified file.
Minor fixes:
- remove a duplicate #include in table/table_test.cc
- fix a commentary typo in include/rocksdb/memtablerep.h
- fix lint errors.
Test Plan:
Runs sst_dump with both block-based and plain-table format files with
different arguments, specifically those with --show-properties and --from.
* sample output:
https://reviews.facebook.net/P261
Reviewers: kailiu, sdong, xjin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15903
Summary:
Some changes to PlainTable format:
(1) support variable key length
(2) use user defined slice transformer to extract prefixes
(3) Run some test cases against PlainTable in db_test and table_test
Test Plan: test db_test
Reviewers: haobo, kailiu
CC: dhruba, igor, leveldb, nkg-
Differential Revision: https://reviews.facebook.net/D14457
Summary:
This is the last diff that adds the property block to plain table.
The format resembles that of the block-based table: https://github.com/facebook/rocksdb/wiki/Rocksdb-table-format
[data block]
[meta block 1: stats block]
[meta block 2: future extended block]
...
[meta block K: future extended block] (we may add more meta blocks in the future)
[metaindex block]
[index block: we only have the placeholder here, we can add persistent index block in the future]
[Footer: contains magic number, handle to metaindex block and index block]
<end_of_file>
Test Plan: extended existing property block test.
Reviewers: haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14523
Summary: This change will allow other table to reuse the code for meta blocks.
Test Plan: all existing unit tests passed
Reviewers: dhruba, haobo, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14475