Summary:
When 2 phase commit is enabled, if there are prepared data in a WAL, the WAL should be kept, the minimum log number for such a WAL is written to MANIFEST during flush. In atomic flush, such information is not written to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7570
Test Plan: Added a new unit test `DBAtomicFlushTest.ManualFlushUnder2PC`, this test fails in atomic flush without this PR, after this PR, it succeeds.
Reviewed By: riversand963
Differential Revision: D24394222
Pulled By: cheng-chang
fbshipit-source-id: 60ce74b21b704804943be40c8de01b41269cf116
Summary:
The logic for computing min_log_number_to_keep in atomic flush was incorrect.
For example, when all column families are flushed, the min_log_number_to_keep should be the latest new log. But the incorrect logic calls `PrecomputeMinLogNumberToKeepNon2PC` for each column family, and returns the minimum of them. However, `PrecomputeMinLogNumberToKeepNon2PC(cf)` assumes column families other than `cf` are flushed, but in case all column families are flushed, this assumption is incorrect.
Without this fix, the WAL referenced by the computed min_log_number_to_keep may actually contain no unflushed data, so the WAL might have actually been deleted from disk on recovery, then an incorrect error `Corruption: missing WAL` will be reported.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7660
Test Plan:
run `make crash_test_with_atomic_flush` on devserver
added a unit test in `db_flush_test`
Reviewed By: riversand963
Differential Revision: D24906265
Pulled By: cheng-chang
fbshipit-source-id: 08deda62e71f67f59e3b7925cdd86dd09bd4f430
Summary:
Consider the following sequence of events:
1. Db flushed an SST with file number N, appended to MANIFEST, and tried to sync the MANIFEST.
2. Syncing MANIFEST failed and db crashed.
3. Db tried to recover with this MANIFEST. In the meantime, no entry about the newly-flushed SST was found in the MANIFEST. Therefore, RocksDB replayed WAL and tried to flush to an SST file reusing the same file number N. This failed because file system does not support overwrite. Then Db deleted this file.
4. Db crashed again.
5. Db tried to recover. When db read the MANIFEST, there was an entry referencing N.sst. This could happen probably because the append in step 1 finally reached the MANIFEST and became visible. Since N.sst had been deleted in step 3, recovery failed.
It is possible that N.sst created in step 1 is valid. Although step 3 would still fail since the MANIFEST was not synced properly in step 1 and 2, deleting N.sst would make it impossible for the db to recover even if the remaining part of MANIFEST was appended and visible after step 5.
After this PR, in step 3, immediately after recovering from MANIFEST, a new MANIFEST is created, then we find that N.sst is not referenced in the MANIFEST, so we delete it, and we'll not reuse N as file number. Then in step 5, since the new MANIFEST does not contain N.sst, the recovery failure situation in step 5 won't happen.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7621
Test Plan:
1. some tests are updated, because these tests assume that new MANIFEST is created after WAL recovery.
2. a new unit test is added in db_basic_test to simulate step 3.
Reviewed By: riversand963
Differential Revision: D24668144
Pulled By: cheng-chang
fbshipit-source-id: 90d7487fbad2bc3714f5ede46ea949895b15ae3b
Summary:
When a WAL is synced, an edit is written to MANIFEST.
After flushing memtables, the obsoleted WALs are piggybacked to MANIFEST while writing the new L0 files to MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7601
Test Plan:
`track_and_verify_wals_in_manifest` is enabled by default for all tests extending `DBBasicTest`, and in db_stress_test.
Unit test `wal_edit_test`, `version_edit_test`, and `version_set_test` are also updated.
Watch all tests to pass.
Reviewed By: ltamasi
Differential Revision: D24553957
Pulled By: cheng-chang
fbshipit-source-id: 66a569ff1bdced38e22900bd240b73113906e040
Summary:
As suggested by pdillinger ,The name of kLogFile is misleading, in some tests, kLogFile is defined as info log. Replace it with kWalFile and move it to public, which will be used in https://github.com/facebook/rocksdb/issues/7523
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7580
Test Plan: make check
Reviewed By: riversand963
Differential Revision: D24485420
Pulled By: zhichao-cao
fbshipit-source-id: 955e3dacc1021bb590fde93b0a568ffe9ad80799
Summary:
Add db_basic_test status check list. Some of the warnings are suppressed. It is possible that some of them are due to real bugs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7452
Test Plan: See CI tests pass.
Reviewed By: zhichao-cao
Differential Revision: D23979764
fbshipit-source-id: 6151570c2a9b931b0fbb3fe939a94b2bd1583cbe
Summary:
Possible fix for a TSAN issue reported in EnableFileDeletions.
disable_delete_obsolete_files_ should only be accessed holding the db
mutex, but for logging it was being accessed outside holding the mutex,
now fixed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7435
Test Plan: existing tests, watch for recurrence
Reviewed By: ltamasi
Differential Revision: D23917578
Pulled By: pdillinger
fbshipit-source-id: 8573025bca3f6fe169b24b87bbfc4ce9667b0482
Summary:
This test uses database functionality and required more extensive work to get it to pass than the other tests. The DB functionality required for this test now passes the check.
When it was unclear what the proper behavior was for unchecked status codes, a TODO was added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7283
Reviewed By: akankshamahajan15
Differential Revision: D23251497
Pulled By: ajkr
fbshipit-source-id: 52b79629bdafa0a58de8ead1d1d66f141b331523
Summary:
Make (most of) the env*_test pass when ASSERT_STATUS_CHECKED is enabled.
One test that opens a database is currently disabled in this mode, as there are many errors that need revisited for DB tests and status checks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7176
Reviewed By: cheng-chang
Differential Revision: D22799278
Pulled By: ajkr
fbshipit-source-id: 16d8a02eaeecd6df1060249b6a5811292801f2ed
Summary:
This PR provides preliminary support for handling IO error during MANIFEST write.
File write/sync is not guaranteed to be atomic. If we encounter an IOError while writing/syncing to the MANIFEST file, we cannot be sure about the state of the MANIFEST file. The version edits may or may not have reached the file. During cleanup, if we delete the newly-generated SST files referenced by the pending version edit(s), but the version edit(s) actually are persistent in the MANIFEST, then next recovery attempt will process the version edits(s) and then fail since the SST files have already been deleted.
One approach is to truncate the MANIFEST after write/sync error, so that it is safe to delete the SST files. However, file truncation may not be supported on certain file systems. Therefore, we take the following approach.
If an IOError is detected during MANIFEST write/sync, we disable file deletions for the faulty database. Depending on whether the IOError is retryable (set by underlying file system), either RocksDB or application can call `DB::Resume()`, or simply shutdown and restart. During `Resume()`, RocksDB will try to switch to a new MANIFEST and write all existing in-memory version storage in the new file. If this succeeds, then RocksDB may proceed. If all recovery is completed, then file deletions will be re-enabled.
Note that multiple threads can call `LogAndApply()` at the same time, though only one of them will be going through the process MANIFEST write, possibly batching the version edits of other threads. When the leading MANIFEST writer finishes, all of the MANIFEST writing threads in this batch will have the same IOError. They will all call `ErrorHandler::SetBGError()` in which file deletion will be disabled.
Possible future directions:
- Add an `ErrorContext` structure so that it is easier to pass more info to `ErrorHandler`. Currently, as in this example, a new `BackgroundErrorReason` has to be added.
Test plan (dev server):
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6949
Reviewed By: anand1976
Differential Revision: D22026020
Pulled By: riversand963
fbshipit-source-id: f3c68a2ef45d9b505d0d625c7c5e0c88495b91c8
Summary:
1. Update column_family_memtables_ to point to latest column_family_set in
version_set after recovery.
2. Normalize file paths passed by application so that directories end with '/'
or '\\'.
3. In addition to missing files, corrupted files are also ignored in
best-efforts recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6824
Test Plan: COMPILE_WITH_ASAN=1 make check
Reviewed By: anand1976
Differential Revision: D21463905
Pulled By: riversand963
fbshipit-source-id: c48db8843cc93c8c1c7139c474b64e6f775307d2
Summary:
The patch extends `FindObsoleteFiles` and `PurgeObsoleteFiles` with
support for blob files. The behavior is analogous to SST files: obsolete
blob files are put on the "candidates for deletion" list, while live (and pending)
files are preserved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6807
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21406249
Pulled By: ltamasi
fbshipit-source-id: 1948f71c31927564b61e8af394f50ca3964880d9
Summary:
The patch adds logic that returns the set of live blob files from
`Version::AddLiveFiles` and `VersionSet::AddLiveFiles` (in addition to
live table files), and also cleans up the code a bit, for example, by
exposing only the numbers of table files as opposed to the earlier
`FileDescriptor`s that no clients used. Moreover, the patch extends
the `GetLiveFiles` API so that it also exposes blob files in the current version.
Similarly to https://github.com/facebook/rocksdb/pull/6755,
this is a building block for identifying and purging obsolete blob files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6785
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21336210
Pulled By: ltamasi
fbshipit-source-id: fc1aede8a49eacd03caafbc5f6f9ce43b6270821
Summary:
The patch adds logic to keep track of obsolete blob files. A blob file becomes
obsolete when the last `shared_ptr` that points to the corresponding
`SharedBlobFileMetaData` object goes away, which, in turn, happens when the
last `Version` that contains the blob file is destroyed. No longer needed blob
files are added to the obsolete list in `VersionSet` using a custom deleter to
avoid unnecessary coupling between `SharedBlobFileMetaData` and `VersionSet`.
Obsolete blob files are returned by `VersionSet::GetObsoleteFiles` and stored
in `JobContext`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6755
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D21233155
Pulled By: ltamasi
fbshipit-source-id: 47757e06fdc0127f27ed57f51abd27893d9a7b7a
Summary:
After a successful recovery, the CURRENT file should be updated to point to the valid MANIFEST.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6746
Test Plan: make check
Reviewed By: anand1976
Differential Revision: D21189876
Pulled By: riversand963
fbshipit-source-id: 7537b49988c5c425ebe9505a5cc260de351ad79b
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.
Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334
Reviewed By: anand1976
Differential Revision: D19778960
Pulled By: riversand963
fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
This is a bunch of small improvements to `VersionEdit`. Namely, the patch
* Makes the names and order of variables, methods, and code chunks related
to the various information elements more consistent, and adds missing
getters for the sake of completeness.
* Initializes previously uninitialized stack variables.
* Marks all getters const to improve const correctness.
* Adds in-class initializers and removes the default ctor that would
create an object with uninitialized built-in fields and call `Clear`
afterwards.
* Adds a new type alias for new files and changes the existing `typedef`
for deleted files into a type alias as well.
* Makes the helper method `DecodeNewFile4From` private.
* Switches from long-winded iterator syntax to range based loops in a
couple of places.
* Fixes a couple of assignments where an integer 0 was assigned to
boolean members.
* Fixes a getter which used to return a `const std::string` instead of
the intended `const std::string&`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6383
Test Plan: make check
Differential Revision: D19780537
Pulled By: ltamasi
fbshipit-source-id: b0b4f09fee0ec0e7c7b7a6d76bfe5346e91824d0
Summary:
After secondary instance replays the logs from primary, certain files become
obsolete. The secondary should find these files, evict their table readers from
table cache and close them. If this is not done, the secondary will hold on to
these files and prevent their space from being freed.
Test plan (devserver):
```
$./db_secondary_test --gtest_filter=DBSecondaryTest.SecondaryCloseFiles
$make check
$./db_stress -ops_per_thread=100000 -enable_secondary=true -threads=32 -secondary_catch_up_one_in=10000 -clear_column_family_one_in=1000 -reopen=100
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6114
Differential Revision: D18769998
Pulled By: riversand963
fbshipit-source-id: 5d1f151567247196164e1b79d8402fa2045b9120
Summary:
Originally the loop of closing WAL in PurgeObsoleteFiles resides inside a loop
iterating over the candidate files. It should be moved out.
Test plan (devserver)
```
$COMPILE_WITH_ASAN=1 make -j32 all
$make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5804
Differential Revision: D17374350
Pulled By: riversand963
fbshipit-source-id: 2bee7343fc0481d9a385a87c7676491522285c96
Summary:
purge_queue_ maybe contains thousands sst files, for example manual compact a range. If full scan is triggered at the same time and the total sst files number is large, RocksDB will be blocked at https://github.com/facebook/rocksdb/blob/master/db/db_impl_files.cc#L150 for several seconds. In our environment we have 140,000 sst files and the manual compaction delete about 1000 sst files, it blocked about 2 minutes.
Commandeering https://github.com/facebook/rocksdb/issues/5290.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5796
Differential Revision: D17357775
Pulled By: riversand963
fbshipit-source-id: 20eacca917355b8de975ccc7b1c9a3e7bd5b201a
Summary:
This is a new API added to db.h to allow for fetching all merge operands associated with a Key. The main motivation for this API is to support use cases where doing a full online merge is not necessary as it is performance sensitive. Example use-cases:
1. Update subset of columns and read subset of columns -
Imagine a SQL Table, a row is encoded as a K/V pair (as it is done in MyRocks). If there are many columns and users only updated one of them, we can use merge operator to reduce write amplification. While users only read one or two columns in the read query, this feature can avoid a full merging of the whole row, and save some CPU.
2. Updating very few attributes in a value which is a JSON-like document -
Updating one attribute can be done efficiently using merge operator, while reading back one attribute can be done more efficiently if we don't need to do a full merge.
----------------------------------------------------------------------------------------------------
API :
Status GetMergeOperands(
const ReadOptions& options, ColumnFamilyHandle* column_family,
const Slice& key, PinnableSlice* merge_operands,
GetMergeOperandsOptions* get_merge_operands_options,
int* number_of_operands)
Example usage :
int size = 100;
int number_of_operands = 0;
std::vector<PinnableSlice> values(size);
GetMergeOperandsOptions merge_operands_info;
db_->GetMergeOperands(ReadOptions(), db_->DefaultColumnFamily(), "k1", values.data(), merge_operands_info, &number_of_operands);
Description :
Returns all the merge operands corresponding to the key. If the number of merge operands in DB is greater than merge_operands_options.expected_max_number_of_operands no merge operands are returned and status is Incomplete. Merge operands returned are in the order of insertion.
merge_operands-> Points to an array of at-least merge_operands_options.expected_max_number_of_operands and the caller is responsible for allocating it. If the status returned is Incomplete then number_of_operands will contain the total number of merge operands found in DB for key.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5604
Test Plan:
Added unit test and perf test in db_bench that can be run using the command:
./db_bench -benchmarks=getmergeoperands --merge_operator=sortlist
Differential Revision: D16657366
Pulled By: vjnadimpalli
fbshipit-source-id: 0faadd752351745224ee12d4ae9ef3cb529951bf
Summary:
Currently in `DBImpl::PurgeObsoleteFiles`, the list of candidate files is create through a combination of calling LogFileName using `log_delete_files` and `full_scan_candidate_files`.
In full_scan_candidate_files, the filenames look like this
{file_name = "074715.log", file_path = "/txlogs/3306"},
but LogFileName produces filenames like this that prepends a slash:
{file_name = "/074715.log", file_path = "/txlogs/3306"},
This confuses the dedup step here: bb4178066d/db/db_impl/db_impl_files.cc (L339-L345)
Because duplicates still exist, DeleteFile is called on the same file twice, and hits an error on the second try. Error message: Failed to mark /txlogs/3302/764418.log as trash.
The root cause is the use of `kDumbDbName` when generating file names, it creates file names like /074715.log. This PR removes the use of `kDumbDbName` and create paths without leading '/' when dbname can be ignored.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5603
Test Plan: make check
Differential Revision: D16413203
Pulled By: miasantreble
fbshipit-source-id: 6ba8288382c55f7d5e3892d722fc94b57d2e4491
Summary:
1. Cleanup WAL trash files on open
2. Don't apply deletion rate limit if WAL dir is different from db dir
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5520
Test Plan: Add new unit tests and make check
Differential Revision: D16096750
Pulled By: anand1976
fbshipit-source-id: 6f07858ad864b754b711db416f0389c45ede599b
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
