Summary: In PlainTable, use one single byte to represent 8 bytes of internal bytes, if seqID = 0 and it is value type (which should be common for bottom most files). It is to save 7 bytes for uncompressed cases.
Test Plan: make all check
Reviewers: haobo, dhruba, kailiu
Reviewed By: haobo
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D15489
Summary:
I will submit a sequence of diffs that are preparing master branch for column families. There are a lot of implicit assumptions in the code that are making column family implementation hard. If I make the change only in column family branch, it will make merging back to master impossible.
Most of the diffs will be simple code refactorings, so I hope we can have fast turnaround time. Feel free to grab me in person to discuss any of them.
This diff removes number of level check from VersionEdit. It is used only when VersionEdit is read, not written, but has to be set when it is written. I believe it is a right thing to make VersionEdit dumb and check consistency on the caller side. This will also make it much easier to implement Column Families, since different column families can have different number of levels.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15159
Summary:
In some use cases, table readers for all live files should always be cached. In that case, there will be an opportunity to avoid the table cache look-up while Get() and NewIterator().
We define options.max_open_files = -1 to be the mode that table readers for live files will always be kept. In that mode, table readers are cached in FileMetaData (with a reference count hold in table cache). So that when executing table_cache.Get() and table_cache.newInterator(), LRU cache checking can be by-passed, to reduce latency.
Test Plan: add a test case in db_test
Reviewers: haobo, kailiu
Reviewed By: haobo
CC: dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D15039
Summary:
Code was always compressing L0 files written by a memtable flush
when compression was enabled. Now this is done when
min_level_to_compress=0 for leveled compaction and when
universal_compaction_size_percent=-1 for universal compaction.
Task ID: #3416472
Blame Rev:
Test Plan:
ran db_bench with compression options
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: dhruba, igor, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14757
Summary:
I went through all remaining shared_ptrs and removed the ones that I found not-necessary. Only GenerateCachePrefix() is called fairly often, so don't expect much perf wins.
The ones that are left are accessed infrequently and I think we're fine with keeping them.
Test Plan: make asan_check
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14427
Summary:
The commit at 27bbef1180 had a memory leak
that was detected by valgrind. The memtable that has a refcount decrement
in MemTableList::InstallMemtableFlushResults was not freed.
Test Plan: valgrind ./db_test --leak-check=full
Reviewers: igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14391
Summary: The work to make sure mac os compiles rocksdb is not completed yet. But at least we can start cleaning some warnings captured only by g++ from mac os..
Test Plan: ran make in mac os
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D14049
Summary:
Currently for each put, a fresh memory is allocated, and a new entry is added to the memtable with a new sequence number irrespective of whether the key already exists in the memtable. This diff is an attempt to update the value inplace for existing keys. It currently handles a very simple case:
1. Key already exists in the current memtable. Does not inplace update values in immutable memtable or snapshot
2. Latest value type is a 'put' ie kTypeValue
3. New value size is less than existing value, to avoid reallocating memory
TODO: For a put of an existing key, deallocate memory take by values, for other value types till a kTypeValue is found, ie. remove kTypeMerge.
TODO: Update the transaction log, to allow consistent reload of the memtable.
Test Plan: Added a unit test verifying the inplace update. But some other unit tests broken due to invalid sequence number checks. WIll fix them next.
Reviewers: xinyaohu, sumeet, haobo, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D12423
Automatic commit by arc
Summary:
This patch adds a option for universal compaction to allow us to only compress output files if the files compacted previously did not yet reach a specified ratio, to save CPU costs in some cases.
Compression is always skipped for flushing. This is because the size information is not easy to evaluate for flushing case. We can improve it later.
Test Plan:
add test
DBTest.UniversalCompactionCompressRatio1 and DBTest.UniversalCompactionCompressRatio12
Reviewers: dhruba, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13467
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.
Test Plan: compile rocksdb
Reviewers: emayanke
Reviewed By: emayanke
CC: leveldb
Differential Revision: https://reviews.facebook.net/D13287
Summary: Replace include/leveldb with include/rocksdb.
Test Plan:
make clean; make check
make clean; make release
Differential Revision: https://reviews.facebook.net/D12489
Summary: This diff virtualizes the skiplist interface so that users can provide their own implementation of a backing store for MemTables. Eventually, the backing store will be responsible for its own synchronization, allowing users (and us) to experiment with different lockless implementations.
Test Plan:
make clean
make -j32 check
./db_stress
Reviewers: dhruba, emayanke, haobo
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11739
Summary:
There is a new option called hybrid_mode which, when switched on,
causes HBase style compactions. Files from L0 are
compacted back into L0. This meat of this compaction algorithm
is in PickCompactionHybrid().
All files reside in L0. That means all files have overlapping
keys. Each file has a time-bound, i.e. each file contains a
range of keys that were inserted around the same time. The
start-seqno and the end-seqno refers to the timeframe when
these keys were inserted. Files that have contiguous seqno
are compacted together into a larger file. All files are
ordered from most recent to the oldest.
The current compaction algorithm starts to look for
candidate files starting from the most recent file. It continues to
add more files to the same compaction run as long as the
sum of the files chosen till now is smaller than the next
candidate file size. This logic needs to be debated
and validated.
The above logic should reduce write amplification to a
large extent... will publish numbers shortly.
Test Plan: dbstress runs for 6 hours with no data corruption (tested so far).
Differential Revision: https://reviews.facebook.net/D11289
Summary:
This diff simplifies EnvOptions by treating it as POD, similar to Options.
- virtual functions are removed and member fields are accessed directly.
- StorageOptions is removed.
- Options.allow_readahead and Options.allow_readahead_compactions are deprecated.
- Unused global variables are removed: useOsBuffer, useFsReadAhead, useMmapRead, useMmapWrite
Test Plan: make check; db_stress
Reviewers: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D11175
Summary:
This patch allows an application to specify whether to use bufferedio,
reads-via-mmaps and writes-via-mmaps per database. Earlier, there
was a global static variable that was used to configure this functionality.
The default setting remains the same (and is backward compatible):
1. use bufferedio
2. do not use mmaps for reads
3. use mmap for writes
4. use readaheads for reads needed for compaction
I also added a parameter to db_bench to be able to explicitly specify
whether to do readaheads for compactions or not.
Test Plan: make check
Reviewers: sheki, heyongqiang, MarkCallaghan
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D9429
Summary:
Rocks accumulates recent writes and deletes in the in-memory memtable.
When the memtable is full, it writes the contents on the memtable to
a file in L0.
This patch removes redundant records at the time of the flush. If there
are multiple versions of the same key in the memtable, then only the
most recent one is dumped into the output file. The purging of
redundant records occur only if the most recent snapshot is earlier
than the earliest record in the memtable.
Should we switch on this feature by default or should we keep this feature
turned off in the default settings?
Test Plan: Added test case to db_test.cc
Reviewers: sheki, vamsi, emayanke, heyongqiang
Reviewed By: sheki
CC: leveldb
Differential Revision: https://reviews.facebook.net/D8991
Summary:
Replace manual memory management with std::unique_ptr in a
number of places; not exhaustive, but this fixes a few leaks with file
handles as well as clarifies semantics of the ownership of file handles
with log classes.
Test Plan: db_stress, make check
Reviewers: dhruba
Reviewed By: dhruba
CC: zshao, leveldb, heyongqiang
Differential Revision: https://reviews.facebook.net/D8043
published in https://reviews.facebook.net/D5997.
Summary:
This patch allows compaction to occur in multiple background threads
concurrently.
If a manual compaction is issued, the system falls back to a
single-compaction-thread model. This is done to ensure correctess
and simplicity of code. When the manual compaction is finished,
the system resumes its concurrent-compaction mode automatically.
The updates to the manifest are done via group-commit approach.
Test Plan: run db_bench
In particular, we add a new FilterPolicy class. An instance
of this class can be supplied in Options when opening a
database. If supplied, the instance is used to generate
summaries of keys (e.g., a bloom filter) which are placed in
sstables. These summaries are consulted by DB::Get() so we
can avoid reading sstable blocks that are guaranteed to not
contain the key we are looking for.
This change provides one implementation of FilterPolicy
based on bloom filters.
Other changes:
- Updated version number to 1.4.
- Some build tweaks.
- C binding for CompactRange.
- A few more benchmarks: deleteseq, deleterandom, readmissing, seekrandom.
- Minor .gitignore update.
- Replace raw slice comparison with a call to user comparator.
Added test for custom comparators.
- Fix end of namespace comments.
- Fixed bug in picking inputs for a level-0 compaction.
When finding overlapping files, the covered range may expand
as files are added to the input set. We now correctly expand
the range when this happens instead of continuing to use the
old range. For example, suppose L0 contains files with the
following ranges:
F1: a .. d
F2: c .. g
F3: f .. j
and the initial compaction target is F3. We used to search
for range f..j which yielded {F2,F3}. However we now expand
the range as soon as another file is added. In this case,
when F2 is added, we expand the range to c..j and restart the
search. That picks up file F1 as well.
This change fixes a bug related to deleted keys showing up
incorrectly after a compaction as described in Issue 44.
(Sync with upstream @25072954)
- Removed one copy of an uncompressed block contents changing
the signature of Snappy_Uncompress() so it uncompresses into a
flat array instead of a std::string.
Speeds up readrandom ~10%.
- Instead of a combination of Env/WritableFile, we now have a
Logger interface that can be easily overridden applications
that want to supply their own logging.
- Separated out the gcc and Sun Studio parts of atomic_pointer.h
so we can use 'asm', 'volatile' keywords for Sun Studio.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@39 62dab493-f737-651d-591e-8d6aee1b9529
- LevelDB patch for Sun Studio
Based on a patch submitted by Theo Schlossnagle - thanks!
This fixes Issue 17.
- Fix a couple of test related memory leaks.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@38 62dab493-f737-651d-591e-8d6aee1b9529
- Implemented Get() directly instead of building on top of a full
merging iterator stack. This speeds up the "readrandom" benchmark
by up to 15-30%.
- Fixed an opensource compilation problem.
Added --db=<name> flag to control where the database is placed.
- Automatically compact a file when we have done enough
overlapping seeks to that file.
- Fixed a performance bug where we would read from at least one
file in a level even if none of the files overlapped the key
being read.
- Makefile fix for Mac OSX installations that have XCode 4 without XCode 3.
- Unified the two occurrences of binary search in a file-list
into one routine.
- Found and fixed a bug where we would unnecessarily search the
last file when looking for a key larger than all data in the
level.
- A fix to avoid the need for trivial move compactions and
therefore gets rid of two out of five syncs in "fillseq".
- Removed the MANIFEST file write when switching to a new
memtable/log-file for a 10-20% improvement on fill speed on ext4.
- Adding a SNAPPY setting in the Makefile for folks who have
Snappy installed. Snappy compresses values and speeds up writes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@32 62dab493-f737-651d-591e-8d6aee1b9529
* env_chromium.cc should not export symbols.
* Fix MSVC warnings.
* Removed large value support.
* Fix broken reference to documentation file
git-svn-id: https://leveldb.googlecode.com/svn/trunk@24 62dab493-f737-651d-591e-8d6aee1b9529
