Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
`wal_batch.writeBatchPtr.release()` gives up the ownership of the original `WriteBatch`, but there is no new owner, which causes memory leak.
The patch is simple. Removing `release()` prevent ownership change. `std::move` is for speed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5515
Differential Revision: D16264281
Pulled By: riversand963
fbshipit-source-id: 51c556b7a1c977325c3aa24acb636303847151fa
Summary:
Add C binding for secondary instance as well as unit test.
Test plan (on devserver)
```
$make clean && COMPILE_WITH_ASAN=1 make -j20 all
$./c_test
$make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5505
Differential Revision: D16000043
Pulled By: riversand963
fbshipit-source-id: 3361ef6bfdf4ce12438cee7290a0ac203b5250bd
Summary:
Performing unordered writes in rocksdb when unordered_write option is set to true. When enabled the writes to memtable are done without joining any write thread. This offers much higher write throughput since the upcoming writes would not have to wait for the slowest memtable write to finish. The tradeoff is that the writes visible to a snapshot might change over time. If the application cannot tolerate that, it should implement its own mechanisms to work around that. Using TransactionDB with WRITE_PREPARED write policy is one way to achieve that. Doing so increases the max throughput by 2.2x without however compromising the snapshot guarantees.
The patch is prepared based on an original by siying
Existing unit tests are extended to include unordered_write option.
Benchmark Results:
```
TEST_TMPDIR=/dev/shm/ ./db_bench_unordered --benchmarks=fillrandom --threads=32 --num=10000000 -max_write_buffer_number=16 --max_background_jobs=64 --batch_size=8 --writes=3000000 -level0_file_num_compaction_trigger=99999 --level0_slowdown_writes_trigger=99999 --level0_stop_writes_trigger=99999 -enable_pipelined_write=false -disable_auto_compactions --unordered_write=1
```
With WAL
- Vanilla RocksDB: 78.6 MB/s
- WRITER_PREPARED with unordered_write: 177.8 MB/s (2.2x)
- unordered_write: 368.9 MB/s (4.7x with relaxed snapshot guarantees)
Without WAL
- Vanilla RocksDB: 111.3 MB/s
- WRITER_PREPARED with unordered_write: 259.3 MB/s MB/s (2.3x)
- unordered_write: 645.6 MB/s (5.8x with relaxed snapshot guarantees)
- WRITER_PREPARED with unordered_write disable concurrency control: 185.3 MB/s MB/s (2.35x)
Limitations:
- The feature is not yet extended to `max_successive_merges` > 0. The feature is also incompatible with `enable_pipelined_write` = true as well as with `allow_concurrent_memtable_write` = false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5218
Differential Revision: D15219029
Pulled By: maysamyabandeh
fbshipit-source-id: 38f2abc4af8780148c6128acdba2b3227bc81759
Summary:
There were no C bindings for lowering thread pool priority. This adds those.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5285
Differential Revision: D15290050
Pulled By: siying
fbshipit-source-id: b2ed94d0c39d27434ace2204829a242b53d0d67a
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
For simplicity, to avoid the feature is disabled in two cases: i) When more than one sub-compaction are sharing the same snapshot list, ii) when Range Delete is used in which the range delete aggregator has its own copy of snapshot list.
This fixes the reverted https://github.com/facebook/rocksdb/pull/5099 issue with range deletes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5278
Differential Revision: D15203291
Pulled By: maysamyabandeh
fbshipit-source-id: fa645611e606aa222c7ce53176dc5bb6f259c258
Summary:
Our daily stress tests are failing after this feature. Reverting temporarily until we figure the reason for test failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5269
Differential Revision: D15151285
Pulled By: maysamyabandeh
fbshipit-source-id: e4002b99690a97df30d4b4b58bf0f61e9591bc6e
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5099
Differential Revision: D15086710
Pulled By: maysamyabandeh
fbshipit-source-id: 7649f56c3b6b2fb334962048150142a3bf9c1a12
Summary:
We found that the behavior of CompactionFilter::IgnoreSnapshots() = false isn't
what we have expected. We thought that snapshot will always be preserved.
However, we just realized that, if no snapshot is created while compaction
starts, and a snapshot is created after that, the data seen from the snapshot
can successfully be dropped by the compaction. This creates a strange behavior
to the feature, which is hard to explain. Like what is documented in code
comment, this feature is not very useful with snapshot anyway. The decision
is to deprecate the feature.
We keep the function to avoid to break users code. However, we will fail
compactions if false is returned.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4954
Differential Revision: D13981900
Pulled By: siying
fbshipit-source-id: 2db8c2c3865acd86a28dca625945d1481b1d1e36
Summary:
Current implementation of `current_over_upper_bound_` fails to take into consideration that keys might be invalid in either base iterator or delta iterator. Calling key() in such scenario will lead to assertion failure and runtime errors.
This PR addresses the bug by adding check for valid keys before calling `IsOverUpperBound()`, also added test coverage for iterate_upper_bound usage in BaseDeltaIterator
Also recommit https://github.com/facebook/rocksdb/pull/4656 (It was reverted earlier due to bugs)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4702
Differential Revision: D13146643
Pulled By: miasantreble
fbshipit-source-id: 6d136929da12d0f2e2a5cea474a8038ec5cdf1d0
Summary:
Currently transaction iterator does not apply `ReadOptions.iterate_upper_bound` when iterating. This PR attempts to fix the problem by having `BaseDeltaIterator` enforcing the upper bound check when iterator state is changed.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4656
Differential Revision: D13039257
Pulled By: miasantreble
fbshipit-source-id: 909eb9f6b4597a4d80418fb139f32ec82c6ec1d1
Summary:
he ratio of num_deletions to num_entries of a level can be useful to determine if a manual compaction needs to be triggered on a level.
Also refer #3980
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4623
Differential Revision: D13045744
Pulled By: sagar0
fbshipit-source-id: 71f3c8e363a8ffd194ec3bb0ed0b69612231f0b3
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
Please consider this small PR providing access to the `MemoryUsage::GetApproximateMemoryUsageByType` function in plain C API. Actually I'm working on Go application and now trying to investigate the reasons of high memory consumption (#4313). Go [wrappers](https://github.com/tecbot/gorocksdb) are built on the top of Rocksdb C API. According to the #706, `MemoryUsage::GetApproximateMemoryUsageByType` is considered as the best option to get database internal memory usage stats, but it wasn't supported in C API yet.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4340
Differential Revision: D9655135
Pulled By: ajkr
fbshipit-source-id: a3d2f3f47c143ae75862fbcca2f571ea1b49e14a
Summary:
As you know, almost all compilers support "pragma once" keyword instead of using include guards. To be keep consistency between header files, all header files are edited.
Besides this, try to fix some warnings about loss of data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4339
Differential Revision: D9654990
Pulled By: ajkr
fbshipit-source-id: c2cf3d2d03a599847684bed81378c401920ca848
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039
Differential Revision: D8670178
Pulled By: riversand963
fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
Summary:
…ression
For `CompressionType` we have options `compression` and `bottommost_compression`. Thus, to make the compression options consitent with the compression type when bottommost_compression is enabled, we add the bottommost_compression_opts
Closes https://github.com/facebook/rocksdb/pull/3985
Reviewed By: riversand963
Differential Revision: D8385911
Pulled By: zhichao-cao
fbshipit-source-id: 07bc533dd61bcf1cef5927d8d62901c13d38d5fc
Summary:
Top-level index in partitioned index/filter blocks are small and could be pinned in memory. So far we use that by cache_index_and_filter_blocks to false. This however make it difficult to keep account of the total memory usage. This patch introduces pin_top_level_index_and_filter which in combination with cache_index_and_filter_blocks=true keeps the top-level index in cache and yet pinned them to avoid cache misses and also cache lookup overhead.
Closes https://github.com/facebook/rocksdb/pull/4037
Differential Revision: D8596218
Pulled By: maysamyabandeh
fbshipit-source-id: 3a5f7f9ca6b4b525b03ff6bd82354881ae974ad2
Summary:
Add flush_before_backup to rocksdb_backup_engine_create_new_backup. make c api able to control the flush before backup behavior.
Closes https://github.com/facebook/rocksdb/pull/3897
Differential Revision: D8157676
Pulled By: ajkr
fbshipit-source-id: 88998c62f89f087bf8672398fd7ddafabbada505
Summary:
A minor change: I wrapped TransactionLogIterator for the C API.
I needed that for the golang binding.
Closes https://github.com/facebook/rocksdb/pull/3304
Differential Revision: D6628736
Pulled By: miasantreble
fbshipit-source-id: 3374f3c64b1d7b225696b8767090917761e2f30a
Summary:
Currently, the `rocksdb_options_set_ratelimiter` in `c.cc` will change the input to nil, which make it is
not possible to use the shared rate limiter create by `rocksdb_ratelimiter_create` in different rocksdb option.
In this pr, I changed it to shared ptr.
Closes https://github.com/facebook/rocksdb/pull/3758
Differential Revision: D7749740
Pulled By: ajkr
fbshipit-source-id: c6121f8ca75402afdb4b295ce63c2338d253a1b5
Summary:
Fix the following gcc-8 warnings:
- conflicting C language linkage declaration [-Werror]
- writing to an object with no trivial copy-assignment [-Werror=class-memaccess]
- array subscript -1 is below array bounds [-Werror=array-bounds]
Solves https://github.com/facebook/rocksdb/issues/3716
Closes https://github.com/facebook/rocksdb/pull/3736
Differential Revision: D7684161
Pulled By: yiwu-arbug
fbshipit-source-id: 47c0423d26b74add251f1d3595211eee1e41e54a
Summary:
This pull request exposes the interface of PerfContext as C API
Closes https://github.com/facebook/rocksdb/pull/3607
Differential Revision: D7294225
Pulled By: ajkr
fbshipit-source-id: eddcfbc13538f379950b2c8b299486695ffb5e2c
Summary:
Expose read and write options via the C API
Closes https://github.com/facebook/rocksdb/pull/3185
Differential Revision: D6389658
Pulled By: sagar0
fbshipit-source-id: 1848912750329a476805b3cb2f315e7b71f61472
Summary:
SUMMARY
Moves the bytes_per_sync and wal_bytes_per_sync options from immutableoptions to mutable options. Also if wal_bytes_per_sync is changed, the wal file and memtables are flushed.
TEST PLAN
ran make check
all passed
Two new tests SetBytesPerSync, SetWalBytesPerSync check that after issuing setoptions with a new value for the var, the db options have the new value.
Closes https://github.com/facebook/rocksdb/pull/2893
Reviewed By: yiwu-arbug
Differential Revision: D5845814
Pulled By: TheRushingWookie
fbshipit-source-id: 93b52d779ce623691b546679dcd984a06d2ad1bd
Summary:
Added possibility to set save points in transactions and then rollback to them
Closes https://github.com/facebook/rocksdb/pull/2876
Differential Revision: D5825829
Pulled By: yiwu-arbug
fbshipit-source-id: 62168992340bbcddecdaea3baa2a678475d1429d
Summary:
Added some bindings for `OptimisticTransactionDB` in C API
Closes https://github.com/facebook/rocksdb/pull/2823
Differential Revision: D5820672
Pulled By: yiwu-arbug
fbshipit-source-id: 7efd17f619cc0741feddd2050b8fc856f9288350
Summary:
Solves #2632
Added OptimisticTransactionDB to the C API.
Added missing merge operations to Transaction.
Added missing get_for_update operation to transaction
If required I will create tests for this another day.
Closes https://github.com/facebook/rocksdb/pull/2633
Differential Revision: D5600906
Pulled By: yiwu-arbug
fbshipit-source-id: da23e4484433d8f59d471f778ff2ae210e3fe4eb
