Summary: We don't have access to GetLiveFilesMetadata() in RocksDB lite. If compiling write_stress for lite, I skip the check for leaked files, which depends on this function.
Test Plan: OPT=-DROCKSDB_LITE m write_stress
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49647
Summary:
The goal of this diff is to create a simple stress test with focus on catching:
* bugs in compaction/flush processes, especially the ones that cause assertion errors
* bugs in the code that deletes obsolete files
There are two parts of the test:
* write_stress, a binary that writes to the database
* write_stress_runner.py, a script that invokes and kills write_stress
Here are some interesting parts of write_stress:
* Runs with very high concurrency of compactions and flushes (32 threads total) and tries to create a huge amount of small files
* The keys written to the database are not uniformly distributed -- there is a 3-character prefix that mutates occasionally (in prefix mutator thread), in such a way that the first character mutates slower than second, which mutates slower than third character. That way, the compaction stress tests some interesting compaction features like trivial moves and bottommost level calculation
* There is a thread that creates an iterator, holds it for couple of seconds and then iterates over all keys. This is supposed to test RocksDB's abilities to keep the files alive when there are references to them.
* Some writes trigger WAL sync. This is stress testing our WAL sync code.
* At the end of the run, we make sure that we didn't leak any of the sst files
write_stress_runner.py changes the mode in which we run write_stress and also kills and restarts it. There are some interesting characteristics:
* At the beginning we divide the full test runtime into smaller parts -- shorter runtimes (couple of seconds) and longer runtimes (100, 1000) seconds
* The first time we run write_stress, we destroy the old DB. Every next time during the test, we use the same DB.
* We can run in kill mode or clean-restart mode. Kill mode kills the write_stress violently.
* We can run in mode where delete_obsolete_files_with_fullscan is true or false
* We can run with low_open_files mode turned on or off. When it's turned on, we configure table cache to only hold a couple of files -- that way we need to reopen files every time we access them.
Another goal was to create a stress test without a lot of parameters. So tools/write_stress_runner.py should only take one parameter -- runtime_sec and it should figure out everything else on its own.
In a separate diff, I'll add this new test to our nightly legocastle runs.
Test Plan:
The goal of this test was to retroactively catch the following bugs: D33045, D48201, D46899, D42399. I failed to reproduce D48201, but all others have been caught!
When i reverted https://reviews.facebook.net/D33045:
./write_stress --runtime_sec=200 --low_open_files_mode=true
Iterator statuts not OK: IO error: /fast-rocksdb-tmp/rocksdb_test/write_stress/089166.sst: No such file or directory
When i reverted https://reviews.facebook.net/D42399:
python tools/write_stress_runner.py --runtime_sec=5000
Running write_stress, will kill after 5 seconds: ./write_stress --runtime_sec=-1
Running write_stress, will kill after 2 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false --delete_obsolete_files_with_fullscan=true
Running write_stress, will kill after 7 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false
Running write_stress, will kill after 5 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false
Running write_stress, will kill after 8 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false --low_open_files_mode=true
Write to DB failed: IO error: /fast-rocksdb-tmp/rocksdb_test/write_stress/019250.sst: No such file or directory
ERROR: write_stress died with exitcode=-6
When i reverted https://reviews.facebook.net/D46899:
python tools/write_stress_runner.py --runtime_sec=1000
runtime: 1000
Going to execute write stress for [3, 3, 100, 3, 2, 100, 1, 788]
Running write_stress for 3 seconds: ./write_stress --runtime_sec=3 --low_open_files_mode=true
Running write_stress for 3 seconds: ./write_stress --runtime_sec=3 --destroy_db=false --delete_obsolete_files_with_fullscan=true
Running write_stress, will kill after 100 seconds: ./write_stress --runtime_sec=-1 --destroy_db=false --delete_obsolete_files_with_fullscan=true
write_stress: db/db_impl.cc:2070: void rocksdb::DBImpl::MarkLogsSynced(uint64_t, bool, const rocksdb::Status&): Assertion `log.getting_synced' failed.
ERROR: write_stress died with exitcode=-6
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, sdong, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D49533
Summary: crash_test still has a very low chance to hit some crash point. Have another mode for covering them more likely.
Test Plan: Run crash_test and see db_stress is called with expected prameters.
Reviewers: kradhakrishnan, igor, anthony, rven, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D49473
Summary:
in tools/db_crashtest.py, cmd_params['db'] by default is a lambda expression, not the actual db_name.
fix by get the db_name before passing it to gen_cmd.
Test Plan: run `make crashtest`
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D49119
Summary:
merge tools/db_crashtest2.py into tools/db_crashtest.py
python tools/db_crashtest.py -h # show help message, ALL parameters can be overwrite by arguments
Example usages:
python tools/db_crashtest.py blackbox # run blackbox with default parameters
python tools/db_crashtest.py blackbox --simple
python tools/db_crashtest.py whitebox # run whitebox with default parameters
python tools/db_crashtest.py whitebox --simple
all default parameters are identical to previous version.
Test Plan: `make crash_test` and make sure it can run with expected parameters pased to db_stress.
Reviewers: igor, rven, anthony, IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48567
We will need the log number to validate the recycle-style CRCs. The log
is helpful for debugging, but optional, as not all callers have it.
Signed-off-by: Sage Weil <sage@redhat.com>
Summary:
For half of the crash_test run, disable fail point for file appending, in order to trigger other fail point more frequently.
Also, tune crash test parameter a little bit for it to initialize faster.
Test Plan: Run crash_test and make sure it issues db_stress commands as expected.
Reviewers: yhchiang, igor, rven, anthony, IslamAbdelRahman, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48843
Summary: Mode of data sync off is a much less used than the case of data sync on. Crash test should cover the more common case than a corner case. So turn data sync on in crash tests.
Test Plan: Run crash test and make sure it can run with expected parameters pased to db_stres.
Reviewers: IslamAbdelRahman, anthony, igor, rven, kradhakrishnan, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48729
Summary:
Give a name for every kill point, and allow users to disable some kill points based on prefixes. The kill points can be passed by db_stress through a command line paramter. This provides a way for users to boost the chance of triggering low frequency kill points
This allow follow up changes in crash test scripts to improve crash test coverage.
Test Plan:
Manually run db_stress with variable values of --kill_random_test and --kill_prefix_blacklist. Like this:
--kill_random_test=2 --kill_prefix_blacklist=Posix,WritableFileWriter::Append,WritableFileWriter::WriteBuffered,WritableFileWriter::Sync
Reviewers: igor, kradhakrishnan, rven, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48735
Summary:
This patch will block all tests (not including db_test) that don't compile / fail under ROCKSDB_LITE
Test Plan:
OPT=-DROCKSDB_LITE make db_compaction_filter_test -j64 &&
OPT=-DROCKSDB_LITE make db_compaction_test -j64 &&
OPT=-DROCKSDB_LITE make db_dynamic_level_test -j64 &&
OPT=-DROCKSDB_LITE make db_log_iter_test -j64 &&
OPT=-DROCKSDB_LITE make db_tailing_iter_test -j64 &&
OPT=-DROCKSDB_LITE make db_universal_compaction_test -j64 &&
OPT=-DROCKSDB_LITE make ldb_cmd_test -j64
make clean
make db_compaction_filter_test -j64 &&
make db_compaction_test -j64 &&
make db_dynamic_level_test -j64 &&
make db_log_iter_test -j64 &&
make db_tailing_iter_test -j64 &&
make db_universal_compaction_test -j64 &&
make ldb_cmd_test -j64
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48723
Summary: As part of cleaning up dependencies for tech debt week, we are moving ldb and sst_dump tools from util to tools, since they are tools.
Test Plan: make check
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48747
Summary:
Refactor dump_tool and undump_tool so that it's possible to use them with customized options
for example setting a specific comparator similar to what Dragon is doing with the LdbTool
https://phabricator.fb.com/diffusion/FBCODE/browse/master/dragon/tools/Ldb.cpp
Test Plan:
compiles
used it to dump / undump a dragon shard
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, adsharma
Differential Revision: https://reviews.facebook.net/D47853
Summary:
Fixed the following tsan warning in db_stress.cc
WARNING: ThreadSanitizer: data race (pid=3163194)
Read of size 8 at 0x7fd1797cb518 by thread T32:
#0 VerifyDb tools/db_stress.cc:1731 (db_stress+0x000000040674)
#1 rocksdb::StressTest::ThreadBody(void*) tools/db_stress.cc:1191 (db_stress+0x0000000625a9)
#2 StartThreadWrapper util/env_posix.cc:1648 (db_stress+0x00000028bbbd)
Previous write of size 8 at 0x7fd1797cb518 by thread T31:
#0 VerifyDb tools/db_stress.cc:1726 (db_stress+0x00000004072a)
#1 rocksdb::StressTest::ThreadBody(void*) tools/db_stress.cc:1191 (db_stress+0x0000000625a9)
#2 StartThreadWrapper util/env_posix.cc:1648 (db_stress+0x00000028bbbd)
The cause is that in VerifyDb(), the static local const variable long max_key
can be read and written at the same time. This patch fixed it by making it
non-static.
Test Plan: db_stress
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47703
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary:
Added tests for two LDBCommands namely i) ManifestDumpCommand and ii) ListColumnFamiliesCommand.
+ Minor fix in the sscanf formatter (along relace C cast with C++ cast) + replacing localtime with localtime_r which is thread safe.
Test Plan: make all && ./tools/ldb_test.py
Reviewers: anthony, igor, IslamAbdelRahman, kradhakrishnan, lgalanis, rven, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45819
Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary:
db_bench output now displays Percentile many times with --statistics after
read IO latency histograms were added. So I only need the last one in the report output.
Task ID: #
Blame Rev:
Test Plan:
run run_flash_bench.sh
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45093
Summary:
Up until this point we had DbOptions.num_subcompactions, but
it is semantically more correct to call this max_subcompactions since
we will schedule *up to* DbOptions.max_subcompactions smaller compactions
at a time during a compaction job.
I also added a --subcompactions option to db_bench
Test Plan: make all make check
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45069
Summary:
Changes include:
* don't sync-on-commit for single writer thread in readwhile... tests
* make default block size 8kb rather than 4kb to avoid too small blocks after compression
* use snappy instead of zlib to avoid stalls from compression latency
* disable statistics
* use bytes_per_sync=8M to reduce throughput loss on disk
* use open_files=-1 to reduce mutex contention
Task ID: #
Blame Rev:
Test Plan:
run benchmark
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44961
Summary:
In prepration for running multiple threads at the same time during
a compaction job, this patch assigns each subcompaction its own state
(instead of sharing the one global CompactionState). Each subcompaction then
uses this state to update its statistics, keep track of its snapshots, etc.
during the course of execution. Then at the end of all the executions the
statistics are aggregated across the subcompactions so that the final result
is the same as if only one larger compaction had run.
Test Plan: ./db_test ./db_compaction_test ./compaction_job_test
Reviewers: sdong, anthony, igor, noetzli, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43239
Summary:
While working on single delete support for db_bench, I realized that
db_bench/db_stress contain a bunch of duplicate code related to
copmression and found some typos. This patch removes duplicate code,
typos and a redundant #ifndef in internal_stats.cc.
Test Plan: make db_stress && make db_bench && ./db_bench --benchmarks=compress,uncompress
Reviewers: yhchiang, sdong, rven, anthony, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43965
Summary: In a recent change, crash_test can put data under TEST_TMPDIR. However, the directory is not cleaned before running the test, which may cause unexpected results. Clean it.
Test Plan: Run white and black box crash test against non-existing, or non-empty but not compactible DBs, and make sure it works as expected.
Reviewers: kradhakrishnan, rven, yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43515
Summary: Currently, whitebox crash test is not really executed, because the DB is destroyed after each crash. With this fix, in the first half of the time, DB will keep opening the crashed DB and continue from there.
Test Plan: "make whitebox_crash_test" and see the same DB keeps crashing and being reopened.
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43503
Summary: Currently crash_test only puts data under /tmp. It is less flexible if we want to cover different file systems or media. Make crash_test to appreciate TEST_TMPDIR so that users can run it against another file system.
Test Plan: Run blackbox_crash_test and whitebox_crash_test with or without TEST_TMPDIR set and make sure DBs are put in the right place
Reviewers: kradhakrishnan, yhchiang, rven, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43509
Summary:
crash_test now only runs complicated options, multiple column families, prefix hash, frequently changing options, many compaction threads, etc. These options are good to cover new features but we loss coverage in most common use cases. Furthermore, by running only for multiple column families, we are not able to create LSM trees that are large enough to cover some stress cases.
Make half of crash_test runs the simply tests: single column family, default mem table, one compaction thread, no change options.
Test Plan: Run crash_test
Reviewers: rven, yhchiang, IslamAbdelRahman, kradhakrishnan
Reviewed By: kradhakrishnan
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43461
Summary:
Crash tests are supposed to restart the same DB after crashing, but it is now opening a different DB. Fix it.
It's probably a leftover of https://reviews.facebook.net/D17073
Test Plan: Run the test and make sure the same Db is opened.
Reviewers: kradhakrishnan, rven, igor, IslamAbdelRahman, yhchiang, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43197
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary: This is failing our tsan tests. Our new behavior is to fail DB::Open() if the requested compression is not available. The easiest fix is to make ldb_test not depend on compression.
Test Plan: python tools/ldb_test.py
Reviewers: sdong, yhchiang, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42075
Summary: This option is guarding the feature implemented 2 and a half years ago: D8991. The feature was enabled by default back then and has been running without issues. There is no reason why any client would turn this feature off. I found no reference in fbcode.
Test Plan: none
Reviewers: sdong, yhchiang, anthony, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42063
Summary: Block reduce_levels_test in ROCKSDB_LITE as LDBCommand is not supported
Test Plan:
make reduce_levels_test -j64
OPT=-DROCKSDB_LITE make reduce_levels_test -j64
make check -j64
Reviewers: sdong, igor, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D41967
Summary: This helps Windows port to format their changes, as discussed. Might have formatted some other codes too becasue last 10 commits include more.
Test Plan: Build it.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D41961
Summary: Make RocksDb build and run on Windows to be functionally
complete and performant. All existing test cases run with no
regressions. Performance numbers are in the pull-request.
Test plan: make all of the existing unit tests pass, obtain perf numbers.
Co-authored-by: Praveen Rao praveensinghrao@outlook.com
Co-authored-by: Sherlock Huang baihan.huang@gmail.com
Co-authored-by: Alex Zinoviev alexander.zinoviev@me.com
Co-authored-by: Dmitri Smirnov dmitrism@microsoft.com
Summary: Hack up rocksdb_dump and rocksdb_undump utilities to get this task rolling/promote discussion.
Test Plan: Dump/undump databases recursively to see if nothing is lost.
Reviewers: sdong, yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37269
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary:
Add EventListener::OnTableFileCreated(), which will be called
when a table file is created. This patch is part of the
EventLogger and EventListener integration.
Test Plan: Augment existing test in db/listener_test.cc
Reviewers: anthony, kradhakrishnan, rven, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D38865
Summary:
Fixed db_stress by correcting the verification of column family
names in the Listener of db_stress
Test Plan: db_stress
Reviewers: igor, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39255
Summary: Fixed a compile warning in db_stress in NDEBUG mode.
Test Plan: make OPT=-DNDEBUG db_stress
Reviewers: sdong, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39213
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary:
Fixed the following compile warning in db_stress:
error: 'OnCompactionCompleted' overrides a member function but is not marked 'override' [-Werror,-Winconsistent-missing-override]
Test Plan: make db_stress
Reviewers: sdong, igor, anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39207
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.
After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.
This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).
However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.
Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here.
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37443
Summary:
This runs a benchmark for LevelDB similar to what we have
in tools/run_flash_bench.sh. It requires changes to db_bench that I published
in a LevelDB fork on github. Some results are at:
http://smalldatum.blogspot.com/2015/04/comparing-leveldb-and-rocksdb-take-2.html
Sample output:
ops/sec mb/sec usec/op avg p50 Test
525 16.4 1904.5 1904.5 111.0 fillseq.v32768
75187 15.5 13.3 13.3 4.4 fillseq.v200
28328 5.8 35.3 35.3 4.7 overwrite.t1.s0
175438 0.0 5.7 5.7 4.4 readrandom.t1
28490 5.9 35.1 35.1 4.7 overwrite.t1.s0
121951 0.0 8.2 8.2 5.7 readwhilewriting.t1
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37749
Summary:
This is done to avoid having each thread use the same seed between runs
of db_bench. Without this we can inflate the OS filesystem cache hit rate on
reads for read heavy tests and generally see the same key sequences get generated
between teste runs.
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37563
Summary:
This adds:
1) use of --level_compaction_dynamic_level_bytes=true
2) use of --bytes_per_sync=2M
The second is a big win for disks. The first helps in general.
This also adds a new test, fillseq with 32kb values to increase the peak
ingest and make it more likely that storage limits throughput.
Sample outpout from the first 3 tests - https://gist.github.com/mdcallag/e793bd3038e367b05d6f
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D37509
Summary:
This changes loads to use vector memtable and disable the WAL. This also
increases the chance we will see IO bottlenecks during loads which is good to stress
test HW. But I also think it is a good way to load data quickly as this is a bulk
operation and the WAL isn't needed.
The two numbers below are the MB/sec rates for fillseq, bulkload using a skiplist
or vector memtable and the WAL enabled or disabled. There is a big benefit from
using the vector memtable and WAL disabled. Alas there is also a perf bug in
the use of std::sort for ordered input when the vector is flushed. Task is open
for that.
112, 66 - skiplist with wal
250, 116 - skiplist without wal
110, 108 - vector with wal
232, 370 - vector without wal
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36957
Summary: Add a script, which checks out changes from a list of tags, build them and load the same data into it. In the last, checkout the target build and make sure it can successfully open DB and read all the data. It is implemented through ldb tool, because ldb tool is available from all previous builds so that we don't have to cross build anything.
Test Plan: Run the script.
Reviewers: yhchiang, rven, anthony, kradhakrishnan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36639
Summary:
This adds p99.9 and p99.99 response times to the benchmark report and
adds a second report, report2.txt that has tests listed in test order rather
than the time in which they were run, so overwrite tests are listed for
all thread counts, then update etc.
Also changes fillseq to compress all levels to avoid write-amp from rewriting
uncompressed files when they reach the first level to compress.
Increase max_write_buffer_number to avoid stalls during fillseq and make
max_background_flushes agree with max_write_buffer_number.
See https://gist.github.com/mdcallag/297ff4316a25cb2988f7 for an example
of the new report (report2.txt)
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36537
Summary:
The --stats_interval_seconds determines interval for stats reporting
and overrides --stats_interval when set. I also changed tools/benchmark.sh
to report stats every 60 seconds so I can avoid trying to figure out a
good value for --stats_interval per test and per storage device.
Task ID: #6631621
Blame Rev:
Test Plan:
run tools/run_flash_bench, look at output
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36189
Summary:
This makes run_flash_bench.sh configurable. Previously it was hardwired for 1B keys and tests
ran for 12 hours each. That kept me from using it. This makes it configuable, adds more tests,
makes the duration per-test configurable and refactors the test scripts.
Adds the seekrandomwhilemerging test to db_bench which is the same as seekrandomwhilewriting except
the writer thread does Merge rather than Put.
Forces the stall-time column in compaction IO stats to use a fixed format (H:M:S) which makes
it easier to scrape and parse. Also adds an option to AppendHumanMicros to force a fixed format.
Sometimes automation and humans want different format.
Calls thread->stats.AddBytes(bytes); in db_bench for more tests to get the MB/sec summary
stats in the output at test end.
Adds the average ingest rate to compaction IO stats. Output now looks like:
https://gist.github.com/mdcallag/2bd64d18be1b93adc494
More information on the benchmark output is at https://gist.github.com/mdcallag/db43a58bd5ac624f01e1
For benchmark.sh changes default RocksDB configuration to reduce stalls:
* min_level_to_compress from 2 to 3
* hard_rate_limit from 2 to 3
* max_grandparent_overlap_factor and max_bytes_for_level_multiplier from 10 to 8
* L0 file count triggers from 4,8,12 to 4,12,20 for (start,stall,stop)
Task ID: #6596829
Blame Rev:
Test Plan:
run tools/run_flash_bench.sh
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D36075
Summary:
Whenever we add new tests in db_sanity_test.cc, the verification test
will fail since the old version db_sanity_test.cc does not have the
newly added test. This patch makes auto_sanity_test.sh always use
the db_sanity_test.cc of the newer commit.
As a result, a macro guard is added to allow db_sanity_test.cc to be
backward compatible.
Test Plan: tools/auto_sanity_check.sh
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35997
Summary:
This is like readwhilewriting but uses Merge rather than Put in the writer thread.
I am using it for in-progress benchmarks. I don't think the other benchmarks for Merge
cover this behavior. The purpose for this test is to measure read performance when
readers might have to merge results. This will also benefit from work-in-progress
to add skewed key generation.
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35115
Summary:
Our existing test notation is very similar to what is used in gtest. It makes it easy to adopt what is different.
In this diff I modify existing [[ https://code.google.com/p/googletest/wiki/Primer#Test_Fixtures:_Using_the_Same_Data_Configuration_for_Multiple_Te | test fixture ]] classes to inherit from `testing::Test`. Also for unit tests that use fixture class, `TEST` is replaced with `TEST_F` as required in gtest.
There are several custom `main` functions in our existing tests. To make this transition easier, I modify all `main` functions to fallow gtest notation. But eventually we can remove them and use implementation of `main` that gtest provides.
```lang=bash
% cat ~/transform
#!/bin/sh
files=$(git ls-files '*test\.cc')
for file in $files
do
if grep -q "rocksdb::test::RunAllTests()" $file
then
if grep -Eq '^class \w+Test {' $file
then
perl -pi -e 's/^(class \w+Test) {/${1}: public testing::Test {/g' $file
perl -pi -e 's/^(TEST)/${1}_F/g' $file
fi
perl -pi -e 's/(int main.*\{)/${1}::testing::InitGoogleTest(&argc, argv);/g' $file
perl -pi -e 's/rocksdb::test::RunAllTests/RUN_ALL_TESTS/g' $file
fi
done
% sh ~/transform
% make format
```
Second iteration of this diff contains only scripted changes.
Third iteration contains manual changes to fix last errors and make it compilable.
Test Plan:
Build and notice no errors.
```lang=bash
% USE_CLANG=1 make check -j55
```
Tests are still testing.
Reviewers: meyering, sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D35157
Summary:
gtest does not use exceptions to fail a unit test by design, and `ASSERT*`s are implemented using `return`. As a consequence we cannot use `ASSERT*` in a function that does not return `void` value ([[ https://code.google.com/p/googletest/wiki/AdvancedGuide#Assertion_Placement | 1]]), and have to fix our existing code. This diff does this in a generic way, with no manual changes.
In order to detect all existing `ASSERT*` that are used in functions that doesn't return void value, I change the code to generate compile errors for such cases.
In `util/testharness.h` I defined `EXPECT*` assertions, the same way as `ASSERT*`, and redefined `ASSERT*` to return `void`. Then executed:
```lang=bash
% USE_CLANG=1 make all -j55 -k 2> build.log
% perl -naF: -e 'print "-- -number=".$F[1]." ".$F[0]."\n" if /: error:/' \
build.log | xargs -L 1 perl -spi -e 's/ASSERT/EXPECT/g if $. == $number'
% make format
```
After that I reverted back change to `ASSERT*` in `util/testharness.h`. But preserved introduced `EXPECT*`, which is the same as `ASSERT*`. This will be deleted once switched to gtest.
This diff is independent and contains manual changes only in `util/testharness.h`.
Test Plan:
Make sure all tests are passing.
```lang=bash
% USE_CLANG=1 make check
```
Reviewers: igor, lgalanis, sdong, yufei.zhu, rven, meyering
Reviewed By: meyering
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33333
Summary:
Without this change about half of the updaterandom reads and merge puts will be for keys that don't exist.
I think it is better for these tests to start with a full database and use fillseq to fill it.
Task ID: #
Blame Rev:
Test Plan:
Revert Plan:
Database Impact:
Memcache Impact:
Other Notes:
EImportant:
- begin *PUBLIC* platform impact section -
Bugzilla: #
- end platform impact -
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D35043
Summary:
Single threaded tests -> sync=0 Multi threaded tests -> sync=1 by default unless DB_BENCH_NO_SYNC is defined.
Also added updaterandom and mergerandom with putOperator. I am waiting for some results from udb on this.
Test Plan:
DB_BENCH_NO_SYNC=1 WAL_DIR=/tmp OUTPUT_DIR=/tmp/b DB_DIR=/tmp ./tools/benchmark.sh debug,bulkload,fillseq,overwrite,filluniquerandom,readrandom,readwhilewriting,updaterandom,mergerandom
WAL_DIR=/tmp OUTPUT_DIR=/tmp/b DB_DIR=/tmp ./tools/benchmark.sh debug,bulkload,fillseq,overwrite,filluniquerandom,readrandom,readwhilewriting,updaterandom,mergerandom
Verify sync settings
Reviewers: sdong, MarkCallaghan, igor, rven
Reviewed By: igor, rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34185
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary:
This diff contains trivial fixes for 6 scan-build warnings:
**db/c_test.c**
`db` variable is never read. Removed assignment.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9b77d2.html#EndPath
**db/db_iter.cc**
`skipping` local variable is assigned to false. Then in the next switch block the only "non return" case assign `skipping` to true, the rest cases don't use it and all do return.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-13fca7.html#EndPath
**db/log_reader.cc**
In `bool Reader::SkipToInitialBlock()` `offset_in_block` local variable is assigned to 0 `if (offset_in_block > kBlockSize - 6)` and then never used. Removed the assignment and renamed it to `initial_offset_in_block` to avoid confusion.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-a618dd.html#EndPath
In `bool Reader::ReadRecord(Slice* record, std::string* scratch)` local variable `in_fragmented_record` in switch case `kFullType` block is assigned to false and then does `return` without use. In the other switch case `kFirstType` block the same `in_fragmented_record` is assigned to false, but later assigned to true without prior use. Removed assignment for both cases.
scan-build reprots:
http://home.fburl.com/~sugak/latest20/report-bb86b0.html#EndPathhttp://home.fburl.com/~sugak/latest20/report-a975be.html#EndPath
**table/plain_table_key_coding.cc**
Local variable `user_key_size` is assigned when declared. But then in both places where it is used assigned to `static_cast<uint32_t>(key.size() - 8)`. Changed to initialize the variable to the proper value in declaration.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9e6b86.html#EndPath
**tools/db_stress.cc**
Missing `break` in switch case block. This seems to be a bug. Added missing `break`.
Test Plan:
Make sure all tests are passing and scan-build does not report 'Dead assignment' and 'Dead initialization' bugs.
```lang=bash
% make check
% make analyze
```
Reviewers: meyering, igor, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33795
Summary: rockuse more memory that asked to. Monitor and report.
Test Plan: run the pro with conditions to simulate the overusage. It should report that the process is using more memory than needed.
Reviewers: yhchiang, rven, sdong, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D33249
Summary: We don't have plans to work on this in the short term. If we ever resurrect the project, we can find the code in the history. No need for it to linger around
Test Plan: no test
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32349
Summary:
This diff adds BlockBasedTable format_version = 2. New format version brings better compressed block format for these compressions:
1) Zlib -- encode decompressed size in compressed block header
2) BZip2 -- encode decompressed size in compressed block header
3) LZ4 and LZ4HC -- instead of doing memcpy of size_t encode size as varint32. memcpy is very bad because the DB is not portable accross big/little endian machines or even platforms where size_t might be 8 or 4 bytes.
It does not affect format for snappy.
If you write a new database with format_version = 2, it will not be readable by RocksDB versions before 3.10. DB::Open() will return corruption in that case.
Test Plan:
Added a new test in db_test.
I will also run db_bench and verify VSIZE when block_cache == 1GB
Reviewers: yhchiang, rven, MarkCallaghan, dhruba, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31461
Summary:
A command line like this to run all the tests:
source benchmark.config.sh && nohup ./benchmark.sh 'bulkload,fillseq,overwrite,filluniquerandom,readrandom,readwhilewriting'
where
benchmark.config.sh is:
export DB_DIR=/data/mysql/rocksdata
export WAL_DIR=/txlogs/rockswal
export OUTPUT_DIR=/root/rocks_benchmarking/output
Will fail for the tests that need a new DB .
Also 1) set disable_data_sync=0 and 2) add debug mode to run through all the tests more quickly
Test Plan: run ./benchmark.sh 'debug,bulkload,fillseq,overwrite,filluniquerandom,readrandom,readwhilewriting' and verify that there are no complaints about WAL dir not being empty.
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D30909
Summary:
Priliminary diff to solicit comments.
Given DB path, dump all SST files (key/value and properties), WAL file and manifest
files. What command options do we need to support for this command? Maybe
output_hex for keys?
Test Plan: Create additional ldb unit tests.
Reviewers: sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D29547
Summary: as title
Test Plan: ran it
Reviewers: yhchiang, igor, sdong, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D25563
Summary:
Fix the following compile warning in db_stress.cc on Mac
tools/db_stress.cc:1688:52: error: format specifies type 'unsigned long' but the argument has type '::google::uint64' (aka 'unsigned long long') [-Werror,-Wformat]
fprintf(stdout, "DB-write-buffer-size: %lu\n", FLAGS_db_write_buffer_size);
~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~
%llu
Test Plan:
make
Summary:
Introduces a new class for managing write buffer memory across column
families. We supplement ColumnFamilyOptions::write_buffer_size with
ColumnFamilyOptions::write_buffer, a shared pointer to a WriteBuffer
instance that enforces memory limits before flushing out to disk.
Test Plan: Added SharedWriteBuffer unit test to db_test.cc
Reviewers: sdong, rven, ljin, igor
Reviewed By: igor
Subscribers: tnovak, yhchiang, dhruba, xjin, MarkCallaghan, yoshinorim
Differential Revision: https://reviews.facebook.net/D22581
Summary:
In some environment such as android, the c++ library does not have
std::to_string. This path adds rocksdb::ToString(), which wraps std::to_string
when std::to_string is not available, and implements std::to_string
in the other case.
Test Plan:
make dbg -j32
./db_test
make clean
make dbg OPT=-DOS_ANDROID -j32
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29181
Summary: First commit for rdb shell
Test Plan: unit_test.js does simple assertions on most of the main functionality; will update with rest of tests
Reviewers: igor, rven, lijn, yhciang, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28749
Summary:
Make db_stress built for ROCKSDB_LITE.
The test doesn't pass tough. It seg fault quickly. But I took a look and it doesn't seem to be related to lite version. Likely to be a bug inside RocksDB.
Test Plan: make db_stress
Reviewers: yhchiang, rven, ljin, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28797
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary:
Refactor sst_dump to follow the same structure as ldb. Introduce a
SSTDump interface.
Test Plan: built sst_dump and tried it manually.
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28485
Summary: Previously I made `make check` work with -Wshadow, but there are some tools that are not compiled using `make check`.
Test Plan: make all
Reviewers: yhchiang, rven, ljin, sdong
Reviewed By: ljin, sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28497
Summary: as title
Test Plan: ./db_test
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28269
Summary: Fix lint errors and coding style of ldb related codes.
Test Plan: ./ldb
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28125
Summary:
Added two flags which operate as follows:
in_place_update: enable in_place_update for default column family
set_in_place_one_in: toggles the value of the option inplace_update_support with a probability of 1/N
Test Plan:
Run db_stress with the two flags above set.
Specifically tried in_place_update set to true and set_in_place_one_in set to 10,000.
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28029
Summary: RocksDB already depends on C++11, so we might as well all the goodness that C++11 provides. This means that we don't need AtomicPointer anymore. The less things in port/, the easier it will be to port to other platforms.
Test Plan: make check + careful visual review verifying that NoBarried got memory_order_relaxed, while Acquire/Release methods got memory_order_acquire and memory_order_release
Reviewers: rven, yhchiang, ljin, sdong
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D27543
Summary: Allow SetOptions() during db_stress test
Test Plan: make crash_test
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D25497
Summary: Try to match some parameters from Dhruba's benchmarks on github
Test Plan: ran it
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D24687
Summary: Those were introduced with 2fb1fea30f because the flushing behavior changed when max_background_flushes is > 0.
Test Plan: make check
Reviewers: ljin, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23577
Summary:
Hope these scripts will allow people to run/repro benchmark easily
I think it is time to re-run flash benchmarks and report results
Please comment if any other benchmark runs are needed
Test Plan: ran it
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: dhruba, MarkCallaghan, leveldb
Differential Revision: https://reviews.facebook.net/D23139
Summary:
The compilers we use treat char as signed. However, this is not guarantee of C standard and some compilers (for ARM platform for example), treat char as unsigned. Code that assumes that char is either signed or unsigned is wrong.
This change explicitly casts the char to signed version. This will not break any of our use cases on x86, which, I believe are all of them. In case somebody out there is using RocksDB on ARM AND using bloom filters, they're going to have a bad time. However, it is very unlikely that this is the case.
Test Plan: sanity test with previous commit (with new sanity test)
Reviewers: yhchiang, ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22767
Summary:
1. Make filter_block.h a base class. Derive block_based_filter_block and full_filter_block. The previous one is the traditional filter block. The full_filter_block is newly added. It would generate a filter block that contain all the keys in SST file.
2. When querying a key, table would first check if full_filter is available. If not, it would go to the exact data block and check using block_based filter.
3. User could choose to use full_filter or tradional(block_based_filter). They would be stored in SST file with different meta index name. "filter.filter_policy" or "full_filter.filter_policy". Then, Table reader is able to know the fllter block type.
4. Some optimizations have been done for full_filter_block, thus it requires a different interface compared to the original one in filter_policy.h.
5. Actual implementation of filter bits coding/decoding is placed in util/bloom_impl.cc
Benchmark: base commit 1d23b5c470
Command:
db_bench --db=/dev/shm/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --write_buffer_size=134217728 --max_write_buffer_number=2 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --verify_checksum=false --max_background_compactions=4 --use_plain_table=0 --memtablerep=prefix_hash --open_files=-1 --mmap_read=1 --mmap_write=0 --bloom_bits=10 --bloom_locality=1 --memtable_bloom_bits=500000 --compression_type=lz4 --num=393216000 --use_hash_search=1 --block_size=1024 --block_restart_interval=16 --use_existing_db=1 --threads=1 --benchmarks=readrandom —disable_auto_compactions=1
Read QPS increase for about 30% from 2230002 to 2991411.
Test Plan:
make all check
valgrind db_test
db_stress --use_block_based_filter = 0
./auto_sanity_test.sh
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20979
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.
ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.
I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D22545