Commit Graph

77 Commits

Author SHA1 Message Date
Baraa Hamodi
21e95811d1 Updated all copyright headers to the new format. 2016-02-09 15:12:00 -08:00
Yueh-Hsuan Chiang
4a8cbf4e31 Allows Get and MultiGet to read directly from SST files.
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.

    kSstFileTier = 0x2      // data in SST files.
                          // Note that this ReadTier currently only supports
                          // Get and MultiGet and does not support iterators.

Test Plan: add new test in db_test.

Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: igor, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D53511
2016-02-09 11:20:22 -08:00
Andrew Kryczka
e089db40f9 Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.

- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr

Test Plan:
updated unit test:

  $ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits

will also run 'make check'

Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang

Reviewed By: yhchiang

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D51633
2015-12-23 10:15:07 -08:00
agiardullo
3bfd3d39a3 Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict.  This is due to relying on only the memtables to check for write-conflicts.  Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.

With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts.  This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot.  Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).

Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread.  Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.

Test Plan: unit tests, db bench

Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb, yoshinorim

Differential Revision: https://reviews.facebook.net/D50475
2015-12-11 12:34:11 -08:00
sdong
35ad531be3 Seperate InternalIterator from Iterator
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.

This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.

Test Plan: Run all existing tests.

Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven

Reviewed By: rven

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D48549
2015-10-13 15:32:13 -07:00
Islam AbdelRahman
45e9e4f0bb Refactor NewTableReader to accept TableReaderOptions
Summary:
Refactoring NewTableReader to accept TableReaderOptions
This will make it easier to add new options in the future, for example in this diff https://reviews.facebook.net/D46071

Test Plan: run existing tests

Reviewers: igor, yhchiang, anthony, rven, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D46179
2015-09-11 11:36:33 -07:00
sdong
3e0a672c50 Bug fix: table readers created by TableCache::Get() doesn't have latency histogram reported
Summary: TableCache::Get() puts parameters in the wrong places so that table readers created by Get() will not have the histogram updated.

Test Plan: Will write a unit test for that.

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D46035
2015-09-02 12:57:07 -07:00
Igor Canadi
5f4166c90e ReadaheadRandomAccessFile -- userspace readahead
Summary:
ReadaheadRandomAccessFile acts as a transparent layer on top of RandomAccessFile. When a Read() request is issued, it issues a much bigger request to the OS and caches the result. When a new request comes in and we already have the data cached, it doesn't have to issue any requests to the OS.

We add ReadaheadRandomAccessFile layer only when file is read during compactions.

D45105 was incorrectly closed by Phabricator because I committed it to a separate branch (not master), so I'm resubmitting the diff.

Test Plan: make check

Reviewers: MarkCallaghan, sdong

Reviewed By: sdong

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D45123
2015-08-26 15:25:59 -07:00
Andres Noetzli
3795449c9d Fix DBTest.GetProperty
Summary:
DBTest.GetProperty was failing occasionally (see task #8131266). The reason was
that the test closed the database before the compaction was done. When the test
reopened the database, RocksDB would schedule a compaction which in turn
created table readers and lead the test to fail the assertion that
rocksdb.estimate-table-readers-mem is 0. In most cases, GetIntProperty() of
rocksdb.estimate-table-readers-mem happened before the compaction created the
table readers, hiding the problem. This patch changes the
WaitForFlushMemTable() to WaitForCompact(). WaitForFlushMemTable() is not
necessary because it is already being called a couple of lines before without
any insertions in-between.

Test Plan:
Insert `usleep(10000);` just after `Reopen(options);` on line 2333 to make the issue more likely, then run:
make db_test && while ./db_test --gtest_filter=DBTest.GetProperty; do true; done

Reviewers: rven, yhchiang, anthony, igor, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D45603
2015-08-26 10:10:26 -07:00
sdong
9130873a13 Add options.new_table_reader_for_compaction_inputs
Summary: Currently compaction inputs share the same file descriptor and table reader as other foreground threads. It makes fadvise works less predictable. Add options.new_table_reader_for_compaction_inputs to enforce to create a new file descriptor and new table reader for it.

Test Plan: Add the option.

Reviewers: rven, anthony, kradhakrishnan, IslamAbdelRahman, igor, yhchiang

Reviewed By: igor

Subscribers: igor, MarkCallaghan, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D43311
2015-08-21 08:46:29 -07:00
sdong
72613657f0 Measure file read latency histogram per level
Summary: In internal stats, remember read latency histogram, if statistics is enabled. It can be retrieved from DB::GetProperty() with "rocksdb.dbstats" property, if it is enabled.

Test Plan: Manually run db_bench and prints out "rocksdb.dbstats" by hand and make sure it prints out as expected

Reviewers: igor, IslamAbdelRahman, rven, kradhakrishnan, anthony, yhchiang

Reviewed By: yhchiang

Subscribers: MarkCallaghan, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D44193
2015-08-14 17:32:42 -07:00
sdong
3ae386eafe Add statistic histogram "rocksdb.sst.read.micros"
Summary: Measure read latency histogram and put in statistics. Compaction inputs are excluded from it when possible (unfortunately usually no possible as we usually take table reader from table cache.

Test Plan:
Run db_bench and it shows the stats, like:

rocksdb.sst.read.micros statistics Percentiles :=> 50 : 1.238522 95 : 2.529740 99 : 3.912180

Reviewers: kradhakrishnan, rven, anthony, IslamAbdelRahman, MarkCallaghan, yhchiang

Reviewed By: yhchiang

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D43275
2015-08-05 13:02:33 -07:00
sdong
6e9fbeb27c Move rate_limiter, write buffering, most perf context instrumentation and most random kill out of Env
Summary: We want to keep Env a think layer for better portability. Less platform dependent codes should be moved out of Env. In this patch, I create a wrapper of file readers and writers, and put rate limiting, write buffering, as well as most perf context instrumentation and random kill out of Env. It will make it easier to maintain multiple Env in the future.

Test Plan: Run all existing unit tests.

Reviewers: anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, igor

Reviewed By: igor

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D42321
2015-07-17 16:58:18 -07:00
sdong
041b6f95a2 perf_context: report time spent on reading index and bloom blocks
Summary: Add a perf context counter to help users figure out time spent on reading indexes and bloom filter blocks.

Test Plan: Will write a unit test

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D41433
2015-07-10 14:45:42 -07:00
Giuseppe Ottaviano
782a1590f9 Implement a table-level row cache
Summary:
Implementation of a table-level row cache.
It only caches point queries done through the `DB::Get` interface, queries done through the `Iterator` interface will completely skip the cache.

Supports snapshots and merge operations.

Test Plan: Ran `make valgrind_check commit-prereq`

Reviewers: igor, philipp, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D39849
2015-06-23 10:25:45 -07:00
Igor Canadi
abac3d6476 TableMock + framework for mock classes
Summary:
This diff replaces BlockBasedTable in flush_job_test with TableMock, making it depend on less things and making it closer to an unit test than integration test.

It also introduces a framework to compile mock classes -- Any file named *mock.cc will not be compiled into the build. It will only get compiled into the tests. What way we can mock out most other classes, Version, VersionSet, DBImpl, etc.

Test Plan: flush_job_test

Reviewers: ljin, rven, yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D27681
2014-10-28 17:52:32 -07:00
Lei Jin
2faf49d5f1 use GetContext to replace callback function pointer
Summary:
Intead of passing callback function pointer and its arg on Table::Get()
interface, passing GetContext. This makes the interface cleaner and
possible better perf. Also adding a fast pass for SaveValue()

Test Plan: make all check

Reviewers: igor, yhchiang, sdong

Reviewed By: sdong

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D24057
2014-09-29 11:09:09 -07:00
Lei Jin
5665e5e285 introduce ImmutableOptions
Summary:
As a preparation to support updating some options dynamically, I'd like
to first introduce ImmutableOptions, which is a subset of Options that
cannot be changed during the course of a DB lifetime without restart.

ColumnFamily will keep both Options and ImmutableOptions. Any component
below ColumnFamily should only take ImmutableOptions in their
constructor. Other options should be taken from APIs, which will be
allowed to adjust dynamically.

I am yet to make changes to memtable and other related classes to take
ImmutableOptions in their ctor. That can be done in a seprate diff as
this one is already pretty big.

Test Plan: make all check

Reviewers: yhchiang, igor, sdong

Reviewed By: sdong

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D22545
2014-09-04 16:18:36 -07:00
sdong
1242bfcad7 Add DB property "rocksdb.estimate-table-readers-mem"
Summary:
Add a DB Property "rocksdb.estimate-table-readers-mem" to return estimated memory usage by all loaded table readers, other than allocated from block cache.

Refactor the property codes to allow getting property from a version, with DB mutex not acquired.

Test Plan: Add several checks of this new property in existing codes for various cases.

Reviewers: yhchiang, ljin

Reviewed By: ljin

Subscribers: xjin, igor, leveldb

Differential Revision: https://reviews.facebook.net/D20733
2014-08-06 11:39:46 -07:00
sdong
2459f7ec4e Support Multiple DB paths (without having an interface to expose to users)
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.

Test Plan: make all check

Reviewers: igor, haobo, ljin, yhchiang

Reviewed By: yhchiang

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D18921
2014-07-02 21:14:44 -07:00
Igor Canadi
d4a8423334 Remove seek compaction
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.

This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.

There is one test case that relied on didIO information. I'll try to find another way to implement it.

Test Plan: make check

Reviewers: sdong, haobo, yhchiang, ljin, dhruba

Reviewed By: ljin

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D19161
2014-06-20 10:23:02 +02:00
sdong
cadc1adffa Refactor: group metadata needed to open an SST file to a separate copyable struct
Summary:
We added multiple fields to FileMetaData recently and are planning to add more.
This refactoring separate the minimum information for accessing the file. This object is copyable (FileMetaData is not copyable since the ref counter). I hope this refactoring can enable further improvements:

(1) use it to design a more efficient data structure to speed up read queries.
(2) in the future, when we add information of storage level, we can easily do the encoding, instead of enlarge this structure, which might expand memory work set for file meta data.

The definition is same as current EncodedFileMetaData used in two level iterator, so now the logic in two level iterator is easier to understand.

Test Plan: make all check

Reviewers: haobo, igor, ljin

Reviewed By: ljin

Subscribers: leveldb, dhruba, yhchiang

Differential Revision: https://reviews.facebook.net/D18933
2014-06-16 16:10:52 -07:00
sdong
df9069d23f In DB::NewIterator(), try to allocate the whole iterator tree in an arena
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.

Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.

Test Plan: make all check

Reviewers: ljin, haobo

Reviewed By: haobo

Subscribers: leveldb, dhruba, yhchiang, igor

Differential Revision: https://reviews.facebook.net/D18513
2014-06-02 17:44:57 -07:00
Lei Jin
ccaca59bee avoid calling FindFile twice in TwoLevelIterator for PlainTable
Summary:
this is to reclaim the regression introduced in
https://reviews.facebook.net/D17853

Test Plan: make all check

Reviewers: igor, haobo, sdong, dhruba, yhchiang

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D17985
2014-04-25 12:23:07 -07:00
Lei Jin
d642c60bdc Check PrefixMayMatch on Seek()
Summary:
As a follow-up diff for https://reviews.facebook.net/D17805, add
optimization to check PrefixMayMatch on Seek()

Test Plan: make all check

Reviewers: igor, haobo, sdong, yhchiang, dhruba

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D17853
2014-04-25 12:22:23 -07:00
Lei Jin
3995e801ab kill ReadOptions.prefix and .prefix_seek
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor

Test Plan: make all check

Reviewers: igor, haobo, sdong, yhchiang

Reviewed By: haobo

CC: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D17805
2014-04-25 12:21:34 -07:00
sdong
651792251a Fix bugs introduced by D17961
Summary:
D17961 has two bugs:
(1) two level iterator fails to populate FileMetaData.table_reader, causing performance regression.
(2) table cache handle the !status.ok() case in the wrong place, causing seg fault which shouldn't happen.

Test Plan: make all check

Reviewers: ljin, igor, haobo

Reviewed By: ljin

CC: yhchiang, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D17991
2014-04-17 17:25:28 -07:00
sdong
fa430bfd04 Minimize accessing multiple objects in Version::Get()
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses

Test Plan: make all check

Reviewers: haobo, ljin

Reviewed By: haobo

CC: igor, yhchiang, nkg-, leveldb

Differential Revision: https://reviews.facebook.net/D17739
2014-04-17 14:14:00 -07:00
Igor Canadi
ddbd1ece88 Merge branch 'master' into columnfamilies
Conflicts:
	db/db_impl.cc
	db/db_test.cc
	db/internal_stats.cc
	db/internal_stats.h
	db/version_edit.cc
	db/version_edit.h
	db/version_set.cc
	include/rocksdb/options.h
	util/options.cc
2014-03-31 13:39:24 -07:00
sdong
6b2e7a2a01 When Options.max_num_files=-1, non level0 files also by pass table cache
Summary:
This is the part that was not finished when doing the Options.max_num_files=-1 feature. For iterating non level0 SST files (which was done using two level iterator), table cache is not bypassed. With this patch, the leftover feature is done.

Test Plan: make all check; change Options.max_num_files=-1 in one of the tests to cover the codes.

Reviewers: haobo, igor, dhruba, ljin, yhchiang

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D17001
2014-03-25 18:40:52 -07:00
Igor Canadi
76c048183c Merge branch 'master' into columnfamilies
Conflicts:
	db/db_impl.cc
	db/db_test.cc
	include/rocksdb/db.h
2014-02-14 16:46:03 -08:00
kailiu
63690625cd Expose the table properties to application
Summary: Provide a public API for users to access the table properties for each SSTable.

Test Plan: Added a unit tests to test the function correctness under differnet conditions.

Reviewers: haobo, dhruba, sdong

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D16083
2014-02-13 16:28:21 -08:00
Igor Canadi
0143abdbb0 Merge branch 'master' into columnfamilies
Conflicts:
	HISTORY.md
	db/db_impl.cc
	db/db_impl.h
	db/db_iter.cc
	db/db_test.cc
	db/dbformat.h
	db/memtable.cc
	db/memtable_list.cc
	db/memtable_list.h
	db/table_cache.cc
	db/table_cache.h
	db/version_edit.h
	db/version_set.cc
	db/version_set.h
	db/write_batch.cc
	db/write_batch_test.cc
	include/rocksdb/options.h
	util/options.cc
2014-02-06 15:58:20 -08:00
Igor Canadi
6e56ab5702 [CF] Add full_options_ to ColumnFamilyData
Summary:
Lots of code expects Options on construction/function call. My original idea was to split Options argument into ColumnFamilyOptions and DBOptions (the latter only if needed). However, this will require huge code changes very deep in the stack.

The better idea is to have ColumnFamilyData hold both ColumnFamilyOptions and Options. ColumnFamilyData::Options would be constructed from DBOptions (same for each column family) and ColumnFamilyOptions (different for each column family)

Now when we construct a class or call any method that requires Options, we can just push him ColumnFamilyData::Options and be sure that it's using column-family-specific settings.

Test Plan: make check

Reviewers: dhruba, haobo, kailiu, sdong

CC: leveldb

Differential Revision: https://reviews.facebook.net/D15927
2014-02-05 12:26:40 -08:00
Igor Canadi
c24d8c4e90 [CF] Rethink table cache
Summary:
Adapting table cache to column families is interesting. We want table cache to be global LRU, so if some column families are use not as often as others, we want them to be evicted from cache. However, current TableCache object also constructs tables on its own. If table is not found in the cache, TableCache automatically creates new table. We want each column family to be able to specify different table factory.

To solve the problem, we still have a single LRU, but we provide the LRUCache object to TableCache on construction. We have one TableCache per column family, but the underyling cache is shared by all TableCache objects.

This allows us to have a global LRU, but still be able to support different table factories for different column families. Also, in the future it will also be able to support different directories for different column families.

Test Plan: make check

Reviewers: dhruba, haobo, kailiu, sdong

CC: leveldb

Differential Revision: https://reviews.facebook.net/D15915
2014-02-05 11:55:30 -08:00
Siying Dong
d169b67680 [Performance Branch] PlainTable to encode rows with seqID 0, value type using 1 internal byte.
Summary: In PlainTable, use one single byte to represent 8 bytes of internal bytes, if seqID = 0 and it is value type (which should be common for bottom most files). It is to save 7 bytes for uncompressed cases.

Test Plan: make all check

Reviewers: haobo, dhruba, kailiu

Reviewed By: haobo

CC: igor, leveldb

Differential Revision: https://reviews.facebook.net/D15489
2014-02-03 12:19:30 -08:00
kailiu
4f6cb17bdb First phase API clean up
Summary:
Addressed all the issues in https://reviews.facebook.net/D15447.
Now most table-related modules are hidden from user land.

Test Plan: make check

Reviewers: sdong, haobo, dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D15525
2014-02-03 00:30:43 -08:00
Siying Dong
aa0ef6602d [Performance Branch] If options.max_open_files set to be -1, cache table readers in FileMetadata for Get() and NewIterator()
Summary:
In some use cases, table readers for all live files should always be cached. In that case, there will be an opportunity to avoid the table cache look-up while Get() and NewIterator().

We define options.max_open_files = -1 to be the mode that table readers for live files will always be kept. In that mode, table readers are cached in FileMetaData (with a reference count hold in table cache). So that when executing table_cache.Get() and table_cache.newInterator(), LRU cache checking can be by-passed, to reduce latency.

Test Plan: add a test case in db_test

Reviewers: haobo, kailiu

Reviewed By: haobo

CC: dhruba, igor, leveldb

Differential Revision: https://reviews.facebook.net/D15039
2014-01-10 15:57:49 -08:00
kailiu
9281a826f1 Hotfix the bug in table cache's GetSliceForFileNumber
Forgot to fix this problem in master branch. Already fixed it in performance branch.
2014-01-02 10:30:42 -08:00
Siying Dong
a094f3b3b5 TableCache.FindTable() to avoid the mem copy of file number
Summary: I'm not sure what's the purpose of encoding file number to a new buffer for looking up the table cache. It seems to be unnecessary to me. With this patch, we point the lookup key to the address of the int64 of the file number.

Test Plan: make all check

Reviewers: dhruba, haobo, igor, kailiu

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D14811
2013-12-26 16:57:07 -08:00
Haobo Xu
5b825d6964 [RocksDB] Use raw pointer instead of shared pointer when passing Statistics object internally
Summary: liveness of the statistics object is already ensured by the shared pointer in DB options. There's no reason to pass again shared pointer among internal functions. Raw pointer is sufficient and efficient.

Test Plan: make check

Reviewers: dhruba, MarkCallaghan, igor

Reviewed By: dhruba

CC: leveldb, reconnect.grayhat

Differential Revision: https://reviews.facebook.net/D14289
2013-11-25 10:38:15 -08:00
Siying Dong
f03b2df010 Follow-up Cleaning-up After D13521
Summary:
This patch is to address @haobo's comments on D13521:
1. rename Table to be TableReader and make its factory function to be GetTableReader
2. move the compression type selection logic out of TableBuilder but to compaction logic
3. more accurate comments
4. Move stat name constants into BlockBasedTable implementation.
5. remove some uncleaned codes in simple_table_db_test

Test Plan: pass test suites.

Reviewers: haobo, dhruba, kailiu

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13785
2013-10-30 10:52:33 -07:00
Siying Dong
d4eec30ed0 Make "Table" pluggable
Summary: This patch makes Table and TableBuilder a abstract class and make all the implementation of the current table into BlockedBasedTable and BlockedBasedTable Builder.

Test Plan: Make db_test.cc to work with block based table. Add a new test simple_table_db_test.cc where a different simple table format is implemented.

Reviewers: dhruba, haobo, kailiu, emayanke, vamsi

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13521
2013-10-28 17:54:09 -07:00
Dhruba Borthakur
9cd221094c Add appropriate LICENSE and Copyright message.
Summary:
Add appropriate LICENSE and Copyright message.

Test Plan:
make check

Reviewers:

CC:

Task ID: #

Blame Rev:
2013-10-16 17:48:41 -07:00
sdong
f8509653ba LRUCache to try to clean entries not referenced first.
Summary:
With this patch, when LRUCache.Insert() is called and the cache is full, it will first try to free up entries whose reference counter is 1 (would become 0 after remo\
ving from the cache). We do it in two passes, in the first pass, we only try to release those unreferenced entries. If we cannot free enough space after traversing t\
he first remove_scan_cnt_ entries, we start from the beginning again and remove those entries being used.

Test Plan: add two unit tests to cover the codes

Reviewers: dhruba, haobo, emayanke

Reviewed By: emayanke

CC: leveldb, emayanke, xjin

Differential Revision: https://reviews.facebook.net/D13377
2013-10-11 09:26:21 -07:00
Dhruba Borthakur
a143ef9b38 Change namespace from leveldb to rocksdb
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.

Test Plan: compile rocksdb

Reviewers: emayanke

Reviewed By: emayanke

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13287
2013-10-04 11:59:26 -07:00
Dhruba Borthakur
fc0c399d2e Introduced a new flag non_blocking_io in ReadOptions.
Summary:
If ReadOptions.non_blocking_io is set to true, then KeyMayExists
and Iterators will return data that is cached in RAM.
If the Iterator needs to do IO from storage to serve the data,
then the Iterator.status() will return Status::IsRetry().

Test Plan:
Enhanced unit test DBTest.KeyMayExist to detect if there were are IOs
issues from storage. Added DBTest.NonBlockingIteration to verify
nonblocking Iterations.

Reviewers: emayanke, haobo

Reviewed By: haobo

CC: leveldb

Maniphest Tasks: T63

Differential Revision: https://reviews.facebook.net/D12531
2013-08-28 10:49:14 -07:00
Tyler Harter
4504c99030 Internal/user key bug fix.
Summary: Fix code so that the filter_block layer only assumes keys are internal when prefix_extractor is set.

Test Plan: ./filter_block_test

Reviewers: dhruba, haobo

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D12501
2013-08-23 14:49:57 -07:00
Dhruba Borthakur
1186192ed1 Replace include/leveldb with include/rocksdb.
Summary: Replace include/leveldb with include/rocksdb.

Test Plan:
make clean; make check
make clean; make release

Differential Revision: https://reviews.facebook.net/D12489
2013-08-23 10:51:00 -07:00
Tyler Harter
94cf218720 Revert "Prefix scan: db_bench and bug fixes"
This reverts commit c2bd8f4824.
2013-08-22 18:01:11 -07:00