Commit Graph

248 Commits

Author SHA1 Message Date
Maysam Yabandeh
11526252cc Pinnableslice (2nd attempt)
Summary:
PinnableSlice

    Summary:
    Currently the point lookup values are copied to a string provided by the
    user. This incures an extra memcpy cost. This patch allows doing point lookup
    via a PinnableSlice which pins the source memory location (instead of
    copying their content) and releases them after the content is consumed
    by the user. The old API of Get(string) is translated to the new API
    underneath.

    Here is the summary for improvements:

    value 100 byte: 1.8% regular, 1.2% merge values
    value 1k byte: 11.5% regular, 7.5% merge values
    value 10k byte: 26% regular, 29.9% merge values
    The improvement for merge could be more if we extend this approach to
    pin the merge output and delay the full merge operation until the user
    actually needs it. We have put that for future work.

    PS:
    Sometimes we observe a small decrease in performance when switching from
    t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756

Differential Revision: D4391738

Pulled By: maysamyabandeh

fbshipit-source-id: 6f3edd3
2017-03-13 11:54:10 -07:00
Aaron Gao
2a0f3d0de1 level compaction expansion
Summary:
reimplement the compaction expansion on lower level.

Considering such a case:
input level file: 1[B E] 2[F G] 3[H I] 4 [J M]
output level file: 5[A C] 6[D K] 7[L O]

If we initially pick file 2, now we will compact file 2 and 6. But we can safely compact 2, 3 and 6 without expanding the output level.

The previous code is messy and wrong.

In this diff, I first determine the input range [a, b], and output range [c, d],
then we get the range [e,f] = [min(a, c), max(b, d] and put all eligible clean-cut files within [e, f] into this compaction.

**Note: clean-cut means the files don't have the same user key on the boundaries of some files that are not chosen in this compaction**.
Closes https://github.com/facebook/rocksdb/pull/1760

Differential Revision: D4395564

Pulled By: lightmark

fbshipit-source-id: 2dc2c5c
2017-02-21 10:24:17 -08:00
Yi Wu
9239103cd4 Flush job should release reference current version if sync log failed
Summary:
Fix the bug when sync log fail, FlushJob::Run() will not be execute and
reference to cfd->current() will not be release.
Closes https://github.com/facebook/rocksdb/pull/1792

Differential Revision: D4441316

Pulled By: yiwu-arbug

fbshipit-source-id: 5523e28
2017-01-19 23:09:15 -08:00
Maysam Yabandeh
d0ba8ec8f9 Revert "PinnableSlice"
Summary:
This reverts commit 54d94e9c2c.

The pull request was landed by mistake.
Closes https://github.com/facebook/rocksdb/pull/1755

Differential Revision: D4391678

Pulled By: maysamyabandeh

fbshipit-source-id: 36d5149
2017-01-08 14:24:12 -08:00
Maysam Yabandeh
54d94e9c2c PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.

 Here is the summary for improvements:
 1. value 100 byte: 1.8%  regular, 1.2% merge values
 2. value 1k   byte: 11.5% regular, 7.5% merge values
 3. value 10k byte: 26% regular,    29.9% merge values

 The improvement for merge could be more if we extend this approach to
 pin the merge output and delay the full merge operation until the user
 actually needs it. We have put that for future work.

PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732

Differential Revision: D4374613

Pulled By: maysamyabandeh

fbshipit-source-id: a077f1a
2017-01-08 13:54:13 -08:00
Andrew Kryczka
9e7cf3469b DeleteRange user iterator support
Summary:
Note: reviewed in  https://reviews.facebook.net/D65115

- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464

Differential Revision: D4131753

Pulled By: ajkr

fbshipit-source-id: be86559
2016-11-04 12:09:22 -07:00
Andrew Kryczka
f998c9790f DeleteRange Get support
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.

added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456

Differential Revision: D4111271

Pulled By: ajkr

fbshipit-source-id: 6e388d4
2016-11-03 18:54:20 -07:00
Islam AbdelRahman
869ae5d786 Support IngestExternalFile (remove AddFile restrictions)
Summary:
Changes in the diff

API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API

Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers

Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob

Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)

Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong

Reviewed By: sdong

Subscribers: jkedgar, hcz, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D65061
2016-10-20 17:05:32 -07:00
Andrew Kryczka
6fbe96baf8 Compaction Support for Range Deletion
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.

For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.

To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.

RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.

One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.

Depends on D61473

Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927

Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark

Reviewed By: lightmark

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D62205
2016-10-18 12:04:56 -07:00
Islam AbdelRahman
2ad68b971a Support running consistency checks in release mode
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode

Test Plan:
make check -j64
make release

Reviewers: lightmark, sdong, yiwu

Reviewed By: yiwu

Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba

Differential Revision: https://reviews.facebook.net/D64701
2016-10-07 17:21:45 -07:00
Yi Wu
9ed928e7a9 Split DBOptions into ImmutableDBOptions and MutableDBOptions
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.

Test Plan:
  make all check

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64065
2016-09-23 16:34:04 -07:00
Yi Wu
81747f1be6 Refactor MutableCFOptions
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.

Test Plan: existing unit tests.

Reviewers: yhchiang, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63945
2016-09-13 21:11:59 -07:00
sdong
32df9733d1 Add options.write_buffer_manager: control total memtable size across DB instances
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.

Test Plan: Add a new unit test.

Reviewers: yhchiang, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59925
2016-07-05 18:11:25 -07:00
Aaron Gao
5aaef91d4a group multiple batch of flush into one manifest file (one call to LogAndApply)
Summary: Currently, if several flush outputs are committed together, we issue each manifest write per batch (1 batch = 1 flush = 1 sst file = 1+ continuous memtables). Each manifest write requires one fsync and one fsync to parent directory. In some cases, it becomes the bottleneck of write. We should batch them and write in one manifest write when possible.

Test Plan:
` ./db_bench -benchmarks="fillseq" -max_write_buffer_number=16 -max_background_flushes=16 -disable_auto_compactions=true -min_write_buffer_number_to_merge=1 -write_buffer_size=65536 -level0_stop_writes_trigger=10000 -level0_slowdown_writes_trigger=10000`
**Before**
```
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB:    version 4.9
Date:       Fri Jul  1 15:38:17 2016
CPU:        32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz
CPUCache:   20480 KB
Keys:       16 bytes each
Values:     100 bytes each (50 bytes after compression)
Entries:    1000000
Prefix:    0 bytes
Keys per prefix:    0
RawSize:    110.6 MB (estimated)
FileSize:   62.9 MB (estimated)
Write rate: 0 bytes/second
Compression: Snappy
Memtablerep: skip_list
Perf Level: 1
WARNING: Assertions are enabled; benchmarks unnecessarily slow
------------------------------------------------
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
DB path: [/tmp/rocksdbtest-112628/dbbench]
fillseq      :     166.277 micros/op 6014 ops/sec;    0.7 MB/s
```
**After**
```
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
RocksDB:    version 4.9
Date:       Fri Jul  1 15:35:05 2016
CPU:        32 * Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz
CPUCache:   20480 KB
Keys:       16 bytes each
Values:     100 bytes each (50 bytes after compression)
Entries:    1000000
Prefix:    0 bytes
Keys per prefix:    0
RawSize:    110.6 MB (estimated)
FileSize:   62.9 MB (estimated)
Write rate: 0 bytes/second
Compression: Snappy
Memtablerep: skip_list
Perf Level: 1
WARNING: Assertions are enabled; benchmarks unnecessarily slow
------------------------------------------------
Initializing RocksDB Options from the specified file
Initializing RocksDB Options from command-line flags
DB path: [/tmp/rocksdbtest-112628/dbbench]
fillseq      :      52.328 micros/op 19110 ops/sec;    2.1 MB/s
```

Reviewers: andrewkr, IslamAbdelRahman, yhchiang, sdong

Reviewed By: sdong

Subscribers: igor, andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D60075
2016-07-05 18:09:59 -07:00
sdong
20699df843 memtable_prefix_bloom_bits -> memtable_prefix_bloom_bits_ratio and deprecate memtable_prefix_bloom_probes
Summary:
memtable_prefix_bloom_probes is not a critical option. Remove it to reduce number of options.
It's easier for users to make mistakes with memtable_prefix_bloom_bits, turn it to memtable_prefix_bloom_bits_ratio

Test Plan: Run all existing tests

Reviewers: yhchiang, igor, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: gunnarku, yoshinorim, MarkCallaghan, leveldb, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59199
2016-06-10 12:12:10 -07:00
Wanning Jiang
56887f6cb8 Backup Options
Summary: Backup options file to private directory

Test Plan:
backupable_db_test.cc, BackupOptions
	   Modify DB options by calling OpenDB for 3 times. Check the latest options file is in the right place. Also check no redundent files are backuped.

Reviewers: andrewkr

Reviewed By: andrewkr

Subscribers: leveldb, dhruba, andrewkr

Differential Revision: https://reviews.facebook.net/D59373
2016-06-09 19:03:10 -07:00
Ashish Shenoy
99765ed855 Clean up the ComputeCompactionScore() API
Summary: Make CompactionOptionsFIFO a part of mutable_cf_options

Test Plan: UT

Reviewers: sdong

Reviewed By: sdong

Subscribers: andrewkr, lgalanis, dhruba

Differential Revision: https://reviews.facebook.net/D58653
2016-05-23 15:55:29 -07:00
Andrew Kryczka
73a847ef89 Add per-level compression ratio property
Summary:
This is needed so we can measure compression ratio improvements
achieved by D52287.

The property compares raw data size against the total file size for a given
level. If the level is empty it should return 0.0.

Test Plan: new unit test

Reviewers: IslamAbdelRahman, yhchiang, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D56967
2016-04-20 18:46:54 -07:00
Yueh-Hsuan Chiang
be9816b3d9 Fix data race issue when sub-compaction is used in CompactionJob
Summary:
When subcompaction is used, all subcompactions share the same Compaction
pointer in CompactionJob while each subcompaction all keeps their mutable
stats in SubcompactionState.  However, there're still some mutable part
that is currently store in the shared Compaction pointer.

This patch makes two changes:

1. Make the shared Compaction pointer const so that it can never be modified
   during the compaction.
2. Move necessary states from Compaction to SubcompactionState.
3. Make functions of Compaction const if the function does not modify
   its internal state.

Test Plan: rocksdb and MyRocks test

Reviewers: sdong, kradhakrishnan, andrewkr, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: andrewkr, dhruba, yoshinorim, gunnarku, leveldb

Differential Revision: https://reviews.facebook.net/D55923
2016-03-24 19:36:39 -07:00
Andrew Kryczka
d9620239d2 Cleanup stale manifests outside of full purge
Summary:
- Keep track of obsolete manifests in VersionSet
- Updated FindObsoleteFiles() to put obsolete manifests in the JobContext for later use by PurgeObsoleteFiles()
- Added test case that verifies a stale manifest is deleted by a non-full purge

Test Plan:
  $ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation

Reviewers: IslamAbdelRahman, yoshinorim, sdong

Reviewed By: sdong

Subscribers: andrewkr, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D55269
2016-03-10 18:16:21 -08:00
Baraa Hamodi
21e95811d1 Updated all copyright headers to the new format. 2016-02-09 15:12:00 -08:00
Andrew Kryczka
fdd70d1495 Skip filters for last L0 file if hit-optimized
Summary:
Following up on D53493, we can still enable the filter-skipping
optimization for last file in L0. It's correct to assume the key will be present
in the last L0 file when we're hit-optimized and L0 is deepest.

The FilePicker encapsulates the state for traversing each level's files, so I
needed to make it expose whether the returned file is last in its level.

Test Plan:
verified below test fails before this patch and passes afterwards.
The change to how the test memtable is populated is needed so file 1 has keys
(0, 30, 60), file 2 has keys (10, 40, 70), etc.

  $ ./db_universal_compaction_test --gtest_filter=UniversalCompactionNumLevels/DBTestUniversalCompaction.OptimizeFiltersForHits/*

Reviewers: sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D53583
2016-02-01 14:58:46 -08:00
agiardullo
bcd4ccbc33 Revert D7809
Summary: Revert the functionaility of D7809 (but I'm keeping the logging and test code).  We decided it was dangerous to ignore sync failures based on attempting to read the data written.  The read does not tell us whether the data was synced.

Test Plan: There was no test for the particular functionaility that was reverted.  Keeping the test code from D7809 that tests whether we set the DB to be readonly when paranoid checks are enabled.

Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D52989
2016-01-21 17:14:43 -08:00
sdong
b9f77ba12b When slowdown is triggered, reduce the write rate
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.

Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000

and make sure without the commit, write stop will happen, but with the commit, it will not happen.

Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D52131
2015-12-23 11:33:15 -08:00
Andrew Kryczka
e089db40f9 Skip bottom-level filter block caching when hit-optimized
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.

- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr

Test Plan:
updated unit test:

  $ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits

will also run 'make check'

Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang

Reviewed By: yhchiang

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D51633
2015-12-23 10:15:07 -08:00
agiardullo
3bfd3d39a3 Use SST files for Transaction conflict detection
Summary:
Currently, transactions can fail even if there is no actual write conflict.  This is due to relying on only the memtables to check for write-conflicts.  Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.

With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts.  This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot.  Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).

Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread.  Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.

Test Plan: unit tests, db bench

Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb, yoshinorim

Differential Revision: https://reviews.facebook.net/D50475
2015-12-11 12:34:11 -08:00
sdong
56e77f0967 Deprecate options.soft_rate_limit and add options.soft_pending_compaction_bytes_limit
Summary: Deprecate options.soft_rate_limit, which is hard to tune, with options.soft_pending_compaction_bytes_limit, which would trigger the slowdown if estimated pending compaction bytes exceeds the threshold. The hope is to make it more striaght-forward to tune.

Test Plan: Modify DBTest.SoftLimit to cover options.soft_pending_compaction_bytes_limit instead; run all unit tests.

Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, igor, anthony

Reviewed By: anthony

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D51117
2015-12-09 18:22:45 -08:00
SherlockNoMad
355fa94365 EstimatedNumKeys Counter Inaccurate 2015-12-07 10:51:08 -08:00
sdong
6d6776f6b8 Log more information for the add file with overlapping range failure
Summary: crash_test sometimes fails, hitting the add file overlapping assert. Add information in info logs help us to find the bug.

Test Plan: Run all test suites. Do some manual tests to make sure printing is correct.

Reviewers: kradhakrishnan, yhchiang, anthony, IslamAbdelRahman, rven, igor

Reviewed By: igor

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D49017
2015-10-19 17:31:13 -07:00
Alexey Maykov
f18acd8875 Fixed the clang compilation failure
Summary: As above.

Test Plan: USE_CLANG=1 make check -j

Reviewers: igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D48981
2015-10-19 10:38:50 -07:00
Alexey Maykov
e1a09a7703 Implementation for GetPropertiesOfTablesInRange
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.

Test Plan: ran the GetPropertiesOfTablesInRange

Reviewers: rven, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D48651
2015-10-17 13:34:43 -07:00
sdong
35ad531be3 Seperate InternalIterator from Iterator
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.

This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.

Test Plan: Run all existing tests.

Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven

Reviewed By: rven

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D48549
2015-10-13 15:32:13 -07:00
dyniusz
0267502655 Support for LevelDB SST with .ldb suffix
Summary:
	Handle SST files with both ".sst" and ".ldb" suffix.
	This enables user to migrate from leveldb to rocksdb.

Test Plan:
        Added unit test with DB operating on SSTs with names schema.
        See db/dc_test.cc:SSTsWithLdbSuffixHandling for details

Reviewers: yhchiang, sdong, igor

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D48003
2015-10-06 17:46:22 -07:00
sdong
f1b9f804e9 Add a mode to always pick the oldest file to compact for each level
Summary:
Add options.compaction_pri, which specifies the policy about which file to compact first.
kCompactionPriByLargestSeq will compact oldest files first.
Verified the behavior in db_bench but did not write unit tests yet. Also need to make it settable through option string and dynamically changeable.

Test Plan: Will write unit tests

Reviewers: igor, rven, anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, MarkCallaghan

Reviewed By: yhchiang

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D45951
2015-09-21 17:21:59 -07:00
Ari Ekmekji
3c37b3cccd Determine boundaries of subcompactions
Summary:
Up to this point, the subcompactions that make up a compaction
job have been divided based on the key range of the L1 files, and each
subcompaction has handled the key range of only one file. However
DBOption.max_subcompactions allows the user to designate how many
subcompactions at most to perform. This patch updates the
CompactionJob::GetSubcompactionBoundaries() to determine these
divisions accordingly based on that option and other input/system factors.

The current approach orders the starting and/or ending keys of certain
compaction input files and then generates a histogram to approximate the
size covered by the key range between each consecutive pair of keys. Then
it groups these ranges into groups so that the sizes are approximately equal
to one another. The approach has also been adapted to work for universal
compaction as well instead of just for level-based compaction as it was before.

These subcompactions are then executed in parallel by locally spawning
threads, one for each. The results are then aggregated and the compaction
completed.

Test Plan: make all && make check

Reviewers: yhchiang, anthony, igor, noetzli, sdong

Reviewed By: sdong

Subscribers: MarkCallaghan, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D43269
2015-09-10 13:50:00 -07:00
Yueh-Hsuan Chiang
6996de87af Expose per-level aggregated table properties via GetProperty()
Summary:
This patch adds "rocksdb.aggregated-table-properties"
and "rocksdb.aggregated-table-properties-at-levelN", the former
returns the aggreated table properties of a column family,
while the later returns the aggregated table properties
of the specified level N.

Test Plan: Added tests in db_test

Reviewers: igor, sdong, IslamAbdelRahman, anthony

Reviewed By: anthony

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D45087
2015-08-25 12:03:54 -07:00
sdong
07d2d34160 Add a counter about estimated pending compaction bytes
Summary:
Add a counter of estimated bytes the DB needs to compact for all the compactions to finish. Expose it as a DB Property.
In the future, we can use threshold of this counter to replace soft rate limit and hard rate limit. A single threshold of estimated compaction debt in bytes will be easier for users to reason about when should slow down and stopping than more abstract soft and hard rate limits.

Test Plan: Add unit tests

Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, anthony, igor

Reviewed By: igor

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D44205
2015-08-20 22:17:10 -07:00
Islam AbdelRahman
027ca5b2cd Total SST files size DB Property
Summary: Add a new DB property that calculate the total size of files used by all RocksDB Versions

Test Plan: Unittests for the new property

Reviewers: igor, yhchiang, anthony, rven, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D44799
2015-08-20 11:47:19 -07:00
Yueh-Hsuan Chiang
14d0bfa429 Add DBOptions::skip_sats_update_on_db_open
Summary:
UpdateAccumulatedStats() is used to optimize compaction decision
esp. when the number of deletion entries are high, but this function
can slowdown DBOpen esp. in disk environment.

This patch adds DBOptions::skip_sats_update_on_db_open, which skips
UpdateAccumulatedStats() in DB::Open() time when it's set to true.

Test Plan: Add DBCompactionTest.SkipStatsUpdateTest

Reviewers: igor, anthony, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: tnovak, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D42843
2015-08-04 13:48:16 -07:00
Andres Notzli
06aebca592 Report live data size estimate
Summary:
Fixes T6548822. Added a new function for estimating the size of the live data
as proposed in the task. The value can be accessed through the property
rocksdb.estimate-live-data-size.

Test Plan:
There are two unit tests in version_set_test and a simple test in db_test.
make version_set_test && ./version_set_test;
make db_test && ./db_test gtest_filter=GetProperty

Reviewers: rven, igor, yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D41493
2015-07-21 21:33:20 -07:00
Igor Canadi
35ca59364c Don't let flushes preempt compactions
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.

We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.

Test Plan: make check (there might be some unit tests that depend on this behavior)

Reviewers: IslamAbdelRahman, yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D41931
2015-07-17 12:02:52 -07:00
Ari Ekmekji
74c755c552 Added JSON manifest dump option to ldb command
Summary:
Added a new flag --json to the ldb manifest_dump command
that prints out the version edits as JSON objects for easier
reading and parsing of information.

Test Plan:
**Sample usage: **
```
./ldb manifest_dump --json --path=path/to/manifest/file
```

**Sample output:**
```
{"EditNumber": 0, "Comparator": "leveldb.BytewiseComparator", "ColumnFamily": 0}
{"EditNumber": 1, "LogNumber": 0, "ColumnFamily": 0}
{"EditNumber": 2, "LogNumber": 4, "PrevLogNumber": 0, "NextFileNumber": 7, "LastSeq": 35356, "AddedFiles": [{"Level": 0, "FileNumber": 5, "FileSize": 1949284, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0}
...
{"EditNumber": 13, "PrevLogNumber": 0, "NextFileNumber": 36, "LastSeq": 290994, "DeletedFiles": [{"Level": 0, "FileNumber": 17}, {"Level": 0, "FileNumber": 20}, {"Level": 0, "FileNumber": 22}, {"Level": 0, "FileNumber": 24}, {"Level": 1, "FileNumber": 13}, {"Level": 1, "FileNumber": 14}, {"Level": 1, "FileNumber": 15}, {"Level": 1, "FileNumber": 18}], "AddedFiles": [{"Level": 1, "FileNumber": 25, "FileSize": 2114340, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 26, "FileSize": 2115213, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 27, "FileSize": 2114807, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 30, "FileSize": 2115271, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 31, "FileSize": 2115165, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 32, "FileSize": 2114683, "SmallestIKey": "'", "LargestIKey": "'"}, {"Level": 1, "FileNumber": 35, "FileSize": 1757512, "SmallestIKey": "'", "LargestIKey": "'"}], "ColumnFamily": 0}
...
```

Reviewers: sdong, anthony, yhchiang, igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D41727
2015-07-17 10:07:40 -07:00
Mike Kolupaev
218487d8dc [wal changes 1/3] fixed unbounded wal growth in some workloads
Summary:
This fixes the following scenario we've hit:
 - we reached max_total_wal_size, created a new wal and scheduled flushing all memtables corresponding to the old one,
 - before the last of these flushes started its column family was dropped; the last background flush call was a no-op; no one removed the old wal from alive_logs_,
 - hours have passed and no flushes happened even though lots of data was written; data is written to different column families, compactions are disabled; old column families are dropped before memtable grows big enough to trigger a flush; the old wal still sits in alive_logs_ preventing max_total_wal_size limit from kicking in,
 - a few more hours pass and we run out disk space because of one huge .log file.

Test Plan: `make check`; backported the new test, checked that it fails without this diff

Reviewers: igor

Reviewed By: igor

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D40893
2015-07-02 14:27:00 -07:00
Islam AbdelRahman
3ce3bb3da2 Allowing L0 -> L1 trivial move on sorted data
Summary:
This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping

The conditions for trivial move have been updated

Introduced conditions:
  - Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual)
  - Input level files cannot be overlapping

Removed conditions:
  - Trivial move only run when the compaction is not manual
  - Input level should can contain only 1 file

More context on what tests failed because of Trivial move
```
DBTest.CompactionsGenerateMultipleFiles
This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1
```

```
DBTest.NoSpaceCompactRange
This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation
because trivial move does not need any extra space, and did not check for that
```

```
DBTest.DropWrites
Similar to DBTest.NoSpaceCompactRange
```

```
DBTest.DeleteObsoleteFilesPendingOutputs
This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3
```

```
CuckooTableDBTest.CompactionIntoMultipleFiles
Same as DBTest.CompactionsGenerateMultipleFiles
```

This diff is based on a work by @sdong https://reviews.facebook.net/D34149

Test Plan: make -j64 check

Reviewers: rven, sdong, igor

Reviewed By: igor

Subscribers: yhchiang, ott, march, dhruba, sdong

Differential Revision: https://reviews.facebook.net/D34797
2015-06-04 16:51:25 -07:00
krad
d4540654e9 Optimize GetApproximateSizes() to use lesser CPU cycles.
Summary:
CPU profiling reveals GetApproximateSizes as a bottleneck for performance. The current implementation is sub-optimal, it scans every file in every level to compute the result.

We can take advantage of the fact that all levels above 0 are sorted in the increasing order of key ranges and use binary search to locate the starting index. This can reduce the number of comparisons required to compute the result.

Test Plan: We have good test coverage. Run the tests.

Reviewers: sdong, igor, rven, dynamike

Subscribers: dynamike, maykov, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D37755
2015-04-30 10:55:03 -07:00
Igor Canadi
6059bdf86a Add experimental API MarkForCompaction()
Summary:
Some Mongo+Rocks datasets in Parse's environment are not doing compactions very frequently. During the quiet period (with no IO), we'd like to schedule compactions so that our reads become faster. Also, aggressively compacting during quiet periods helps when write bursts happen. In addition, we also want to compact files that are containing deleted key ranges (like old oplog keys).

All of this is currently not possible with CompactRange() because it's single-threaded and blocks all other compactions from happening. Running CompactRange() risks an issue of blocking writes because we generate too much Level 0 files before the compaction is over. Stopping writes is very dangerous because they hold transaction locks. We tried running manual compaction once on Mongo+Rocks and everything fell apart.

MarkForCompaction() solves all of those problems. This is very light-weight manual compaction. It is lower priority than automatic compactions, which means it shouldn't interfere with background process keeping the LSM tree clean. However, if no automatic compactions need to be run (or we have extra background threads available), we will start compacting files that are marked for compaction.

Test Plan: added a new unit test

Reviewers: yhchiang, rven, MarkCallaghan, sdong

Reviewed By: sdong

Subscribers: yoshinorim, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D37083
2015-04-17 16:44:45 -07:00
sdong
b23bbaa82a Universal Compactions with Small Files
Summary:
With this change, we use L1 and up to store compaction outputs in universal compaction.
The compaction pick logic stays the same. Outputs are stored in the largest "level" as possible.

If options.num_levels=1, it behaves all the same as now.

Test Plan:
1) convert most of existing unit tests for universal comapaction to include the option of one level and multiple levels.
2) add a unit test to cover parallel compaction in universal compaction and run it in one level and multiple levels
3) add unit test to migrate from multiple level setting back to one level setting
4) add a unit test to insert keys to trigger multiple rounds of compactions and verify results.

Reviewers: rven, kradhakrishnan, yhchiang, igor

Reviewed By: igor

Subscribers: meyering, leveldb, MarkCallaghan, dhruba

Differential Revision: https://reviews.facebook.net/D34539
2015-03-30 15:12:02 -07:00
Anurag Indu
3d1a924ff3 Adding stats for the merge and filter operation
Summary:
We have addded new stats and perf_context for measuring the merge and filter operation time consumption.
We have bounded all the merge operations within the GUARD statment and collected the total time for these operations in the DB.

Test Plan: WIP

Reviewers: rven, yhchiang, kradhakrishnan, igor, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D34377
2015-03-24 14:42:04 -07:00
Igor Canadi
db03739340 options.level_compaction_dynamic_level_bytes to allow RocksDB to pick size bases of levels dynamically.
Summary:
When having fixed max_bytes_for_level_base, the ratio of size of largest level and the second one can range from 0 to the multiplier. This makes LSM tree frequently irregular and unpredictable. It can also cause poor space amplification in some cases.

In this improvement (proposed by Igor Kabiljo), we introduce a parameter option.level_compaction_use_dynamic_max_bytes. When turning it on, RocksDB is free to pick a level base in the range of (options.max_bytes_for_level_base/options.max_bytes_for_level_multiplier, options.max_bytes_for_level_base] so that real level ratios are close to options.max_bytes_for_level_multiplier.

Test Plan: New unit tests and pass tests suites including valgrind.

Reviewers: MarkCallaghan, rven, yhchiang, igor, ikabiljo

Reviewed By: ikabiljo

Subscribers: yoshinorim, ikabiljo, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D31437
2015-03-02 22:40:41 -08:00
Igor Sugak
62247ffa3b rocksdb: Add missing override
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.

Prerequisites: bear and clang 3.5 build with extra tools

```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```

Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```

Reviewers: igor, kradhakrishnan, rven, meyering, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D34077
2015-02-26 11:28:41 -08:00