Summary:
Add a new option that can be used to set a specific compression algorithm for bottommost level.
This option will only affect levels larger than base level.
I have also updated CompactionJobInfo to include the compression algorithm used in compaction
Test Plan:
added new unittest
existing unittests
Reviewers: andrewkr, yhchiang, sdong
Reviewed By: sdong
Subscribers: lightmark, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D57669
Summary:
Add an option `iterator_readahead_size` to `ReadOptions` to enable
configurable readahead for iterators similar to the corresponding
option for compaction.
Test Plan:
```
make commit_prereq
```
Reviewers: kumar.rangarajan, ott, igor, sdong
Reviewed By: sdong
Subscribers: yiwu, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55419
Summary: Added EventListener::OnTableFileCreationStarted. EventListener::OnTableFileCreated will be called on failure case. User can check creation status via TableFileCreationInfo::status.
Test Plan: unit test.
Reviewers: dhruba, yhchiang, ott, sdong
Reviewed By: sdong
Subscribers: sdong, kradhakrishnan, IslamAbdelRahman, andrewkr, yhchiang, leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D56337
Summary:
This adds a new metablock containing a shared dictionary that is used
to compress all data blocks in the SST file. The size of the shared dictionary
is configurable in CompressionOptions and defaults to 0. It's currently only
used for zlib/lz4/lz4hc, but the block will be stored in the SST regardless of
the compression type if the user chooses a nonzero dictionary size.
During compaction, computes the dictionary by randomly sampling the first
output file in each subcompaction. It pre-computes the intervals to sample
by assuming the output file will have the maximum allowable length. In case
the file is smaller, some of the pre-computed sampling intervals can be beyond
end-of-file, in which case we skip over those samples and the dictionary will
be a bit smaller. After the dictionary is generated using the first file in a
subcompaction, it is loaded into the compression library before writing each
block in each subsequent file of that subcompaction.
On the read path, gets the dictionary from the metablock, if it exists. Then,
loads that dictionary into the compression library before reading each block.
Test Plan: new unit test
Reviewers: yhchiang, IslamAbdelRahman, cyan, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, kradhakrishnan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52287
Summary:
This is needed so we can measure compression ratio improvements
achieved by D52287.
The property compares raw data size against the total file size for a given
level. If the level is empty it should return 0.0.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56967
Summary:
This interface is redundant and has been deprecated for a while.
It's also unused internally. Let's delete it.
I moved the comments to the corresponding functions in BackupEngine/
BackupEngineReadOnly. This caused the diff tool to not work cleanly.
Test Plan:
unit tests
$ ./backupable_db_test
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56331
Summary: It is useful to print out IO stats in flush jobs too. Extend options.compaction_measure_io_stats to flush jobs and raname it.
Test Plan: Try db_bench and see the stats are printed out.
Reviewers: yhchiang
Reviewed By: yhchiang
Subscribers: kradhakrishnan, yiwu, IslamAbdelRahman, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D56769
Summary: Change some RocksDB default options to make it more friendly to server workloads.
Test Plan: Run all existing tests
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: sumeet, muthu, benj, MarkCallaghan, igor, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D55941
Summary:
Cache to have an option to fail Cache::Insert() when full. Update call sites to check status and handle error.
I totally have no idea what's correct behavior of all the call sites when they encounter error. Please let me know if you see something wrong or more unit test is needed.
Test Plan: make check -j32, see tests pass.
Reviewers: anthony, yhchiang, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D54705
Summary: BlockBasedTableOptions.format_version = 2 uses better encoding format. Now it's the time to make it default.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54879
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator
Test Plan: Rerun existing tests and add a negative test case.
Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54783
Summary:
Add a new compaction priority as following:
For every file, we calculate total size of files overalapping with the file in the next level, over the file's size itself. The file with smallest ratio will be picked first.
My "db_bench --fillrandom" shows about 5% less compaction than kOldestSmallestSeqFirst if --hard_pending_compaction_bytes_limit value to keep LSM tree in shape. If not limiting hard_pending_compaction_bytes_limit, improvement is only 1% or 2%.
Test Plan: Add a unit test
Reviewers: andrewkr, kradhakrishnan, anthony, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D54075
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary: Time to cut branch for release 4.5. Change the versions.
Test Plan: Not needed
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, andrewkr, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53883
Summary:
Add a new class SstFileTracker that will be notified whenever a DB add/delete/move and sst file, it will also replace DeleteScheduler
SstFileTracker can be used later to abort writes when we exceed a specific size
Test Plan: unit tests
Reviewers: rven, anthony, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, lovro, march, dhruba
Differential Revision: https://reviews.facebook.net/D50469
Summary: Measuring mutex duration will measure time inside DB mutex, which breaks our best practice. Add a stat level in Statistics class. By default, disable to measure the mutex operations.
Test Plan: Add a unit test to make sure it is off by default.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, andrewkr, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53367
Summary:
Add an option --column_family option, so that users can query or update specific column family.
Also add an create column family parameter to make unit test easier.
Still need to add unit tests.
Test Plan: Will add a test case in ldb python test.
Reviewers: yhchiang, rven, andrewkr, IslamAbdelRahman, kradhakrishnan, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53265
Summary: Timing mutex operations can impact scalability of the system. Add a new perf context level that can measure time counters except for mutex.
Test Plan: Add a new unit test case to make sure it is not set.
Reviewers: IslamAbdelRahman, rven, kradhakrishnan, yhchiang, anthony
Reviewed By: anthony
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D53199
Summary:
This set of changes implements the following design: `ldb` will utilize `--path` parameter which can be used to specify a file name. Tool will then apply some heuristic to determine how to output the data properly. The design decision is not to probe the file content, but use file names to determine what dumping function to call.
Usage examples:
Understands that path points to a manifest file and dumps it.
`./ldb --path=/tmp/test_db/MANIFEST-000023 dump`
Understands that path points to a WAL file and dumps it.
`./ldb --path=/tmp/test_db/000024.log dump --header`
Understands that path points to a SST file and dumps it.
`./ldb --path=/tmp/test_db/000007.sst dump`
Figures out that none of the supported file types are applicable and outputs
an appropriate error message.
`./ldb --path=/tmp/cron.log dump`
Test Plan:
Basics:
git diff
make clean
make -j 32 commit-prereq
arc lint
More specific testing (done as part of commit-prereq, but can be iterated separately when making isolated changes):
make clean
make ldb
python tools/ldb_test.py
make rocksdb_dump
make rocksdb_undump
sh tools/rocksdb_dump_test.sh
Reviewers: rven, IslamAbdelRahman, yhchiang, kradhakrishnan, anthony, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52269
Summary: We now have a mechanism to further slowdown writes. Double default options.delayed_write_rate to try to keep the default behavior closer to it used to be.
Test Plan: Run all tests.
Reviewers: IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yhchiang, kradhakrishnan, rven, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52281
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
Summary:
Add CompactionReason to CompactionJobInfo
This will allow users to understand why compaction started which will help options tuning
Test Plan:
added new tests
make check -j64
Reviewers: yhchiang, anthony, kradhakrishnan, sdong, rven
Reviewed By: rven
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D51975
Summary: Now if inserting to mem table is much faster than writing to files, there is no mechanism users can rely on to avoid stopping for reaching options.max_write_buffer_number. With the commit, if there are more than four maximum write buffers configured, we slow down to the rate of options.delayed_write_rate while we reach the last one.
Test Plan:
1. Add a new unit test.
2. Run db_bench with
./db_bench --benchmarks=fillrandom --num=10000000 --max_background_flushes=6 --batch_size=32 -max_write_buffer_number=4 --delayed_write_rate=500000 --statistics
based on hard drive and see stopping is avoided with the commit.
Reviewers: yhchiang, IslamAbdelRahman, anthony, rven, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52047
Summary: Deprecate options.soft_rate_limit, which is hard to tune, with options.soft_pending_compaction_bytes_limit, which would trigger the slowdown if estimated pending compaction bytes exceeds the threshold. The hope is to make it more striaght-forward to tune.
Test Plan: Modify DBTest.SoftLimit to cover options.soft_pending_compaction_bytes_limit instead; run all unit tests.
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51117
Summary: Introduce a compaction picking priority that picks files who contains the oldest rows to compact. This is a mode that slightly improves write amplification for random update cases.
Test Plan: Add a unit test and run it in valgrind too.
Reviewers: yhchiang, anthony, IslamAbdelRahman, rven, kradhakrishnan, MarkCallaghan, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51459
Summary: When option.db_write_buffer_size is hit, we currently flush all column families. Move to flush the column family with the largest active memt table instead. In this way, we can avoid too many small files in some cases.
Test Plan: Modify test DBTest.SharedWriteBuffer to work with the updated behavior
Reviewers: kradhakrishnan, yhchiang, rven, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: march, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51291
Summary:
Provide an API for compaction filter to specify that it needs
to be applied even if there are snapshots.
Test Plan: DBTestCompactionFilter.CompactionFilterIgnoreSnapshot
Reviewers: yhchiang, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D51087
Summary:
Add CheckOptionsCompatibility() API to options_util that returns
Status::OK if the input DBOptions and ColumnFamilyDescriptors
are compatible with the latest options stored in the specified DB path.
Test Plan: Added tests in options_util_test
Reviewers: igor, anthony, IslamAbdelRahman, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50649
Summary:
This patch adds OptionsUtil::LoadOptionsFromFile() and
OptionsUtil::LoadLatestOptionsFromDB(), which allow developers
to construct DBOptions and ColumnFamilyOptions from a RocksDB
options file. Note that most pointer-typed options such as
merge_operator will not be constructed.
With this API, developers no longer need to remember all the
options in order to reopen an existing rocksdb instance like
the following:
DBOptions db_options;
std::vector<std::string> cf_names;
std::vector<ColumnFamilyOptions> cf_opts;
// Load primitive-typed options from an existing DB
OptionsUtil::LoadLatestOptionsFromDB(
dbname, &db_options, &cf_names, &cf_opts);
// Initialize necessary pointer-typed options
cf_opts[0].merge_operator.reset(new MyMergeOperator());
...
// Construct the vector of ColumnFamilyDescriptor
std::vector<ColumnFamilyDescriptor> cf_descs;
for (size_t i = 0; i < cf_opts.size(); ++i) {
cf_descs.emplace_back(cf_names[i], cf_opts[i]);
}
// Open the DB
DB* db = nullptr;
std::vector<ColumnFamilyHandle*> cf_handles;
auto s = DB::Open(db_options, dbname, cf_descs,
&handles, &db);
Test Plan:
Augment existing tests in column_family_test
options_test
db_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49095
Summary:
This patch allows rocksdb to persist options into a file on
DB::Open, SetOptions, and Create / Drop ColumnFamily.
Options files are created under the same directory as the rocksdb
instance.
In addition, this patch also adds a fail_if_missing_options_file in DBOptions
that makes any function call return non-ok status when it is not able to
persist options properly.
// If true, then DB::Open / CreateColumnFamily / DropColumnFamily
// / SetOptions will fail if options file is not detected or properly
// persisted.
//
// DEFAULT: false
bool fail_if_missing_options_file;
Options file names are formatted as OPTIONS-<number>, and RocksDB
will always keep the latest two options files.
Test Plan:
Add options_file_test.
options_test
column_family_test
Reviewers: igor, IslamAbdelRahman, sdong, anthony
Reviewed By: anthony
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48285
Summary:
Move some of the items in public API changes section to to new
features section.
Test Plan: no code change.
Reviewers: igor, sdong, anthony, IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D50229
Summary:
This patch introduces utilities/memory, which currently includes
GetApproximateMemoryUsageByType that reports different types of
rocksdb memory usage given a list of input DBs.
The API also take care of the case where Cache could be shared
across multiple column families / multiple db instances.
Currently, it reports memory usage of memtable, table-readers
and cache.
Test Plan: utilities/memory/memory_test.cc
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49257
Summary:
This patch adds GetAggregatedIntProperty() that returns the aggregated
value from all CFs
Test Plan: Added a test in db_test
Reviewers: igor, sdong, anthony, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D49497
Summary:
CreateLoggerFromOptions have some parameters like db_log_dir and env, these parameters are redundant since they already exist in DBOptions
this patch remove the redundant parameters and expose CreateLoggerFromOptions to users
Test Plan: make check
Reviewers: igor, anthony, yhchiang, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D49713
Summary: DefaultCompactionFilterFactory is not used anymore after recent changes. Remove it.
Test Plan: Just run existing tests.
Reviewers: rven, igor, yhchiang, kradhakrishnan, anthony, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48699
Summary: Pass column family ID through TablePropertiesCollectorFactory::CreateTablePropertiesCollector() so that users can identify which column family this file is for and handle it differently.
Test Plan: Add unit test scenarios in tests related to table properties collectors to verify the information passed in is correct.
Reviewers: rven, yhchiang, anthony, kradhakrishnan, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48411
Summary: With this commit, we add a new format in manifest when adding a new file. Now path ID and need-compaction hint are first two customized fields.
Test Plan: Add a test case in version_edit_test to verify the encoding and decoding logic. Add a unit test in db_test to verify need compaction is persistent after DB restarting.
Reviewers: kradhakrishnan, anthony, IslamAbdelRahman, yhchiang, rven, igor
Reviewed By: igor
Subscribers: javigon, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48123
Summary: Add the column family ID to compaction filter context, so it is easier for compaction filter to apply different logic for different column families.
Test Plan: Add a unit test to verify the column family ID passed is correct.
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48357
Summary: Change RocksDB version to 4.1
Test Plan: no code change.
Reviewers: sdong, anthony, IslamAbdelRahman, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48387
Summary:
Two changes:
1. remove *V2 filter stuff. we deprecated that a while ago
2. clarify what happens when user sets max_subcompactions to bigger than 1
Test Plan: none
Reviewers: yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D47871
Summary:
Since Andres' internship is over, I took over https://reviews.facebook.net/D42555 and rebased and simplified it a bit.
The behavior in this diff is a bit simpler than in D42555:
* only merge operators are passed through FilterMergeValue(). If fitler function returns true, the merge operator is ignored
* compaction filter is *not* called on: 1) results of merge operations and 2) base values that are getting merged with merge operands (the second case was also true in previous diff)
Do we also need a compaction filter to get called on merge results?
Test Plan: make && make check
Reviewers: lovro, tnovak, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: noetzli, kolmike, leveldb, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D47847
Summary:
Handle SST files with both ".sst" and ".ldb" suffix.
This enables user to migrate from leveldb to rocksdb.
Test Plan:
Added unit test with DB operating on SSTs with names schema.
See db/dc_test.cc:SSTsWithLdbSuffixHandling for details
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48003
Summary:
This is an initial version of bulk load feature
This diff allow us to create sst files, and then bulk load them later, right now the restrictions for loading an sst file are
(1) Memtables are empty
(2) Added sst files have sequence number = 0, and existing values in database have sequence number = 0
(3) Added sst files values are not overlapping
Test Plan: unit testing
Reviewers: igor, ott, sdong
Reviewed By: sdong
Subscribers: leveldb, ott, dhruba
Differential Revision: https://reviews.facebook.net/D39081
Summary:
This patch fixes#7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).
In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.
Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.
Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
this patch supported this so it could be resurrected if needed)
Test Plan: make all check
Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor
Reviewed By: igor
Subscribers: maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43179
Summary: Release RocksDB 4.0.0
Test Plan: no test
Reviewers: sdong, yhchiang, anthony, rven, kradhakrishnan, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D46515
Summary: Move line about pessimistic transactions to the correct place in the history file and no longer refer to it as 'experimental'
Test Plan: n/a
Reviewers: igor, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46449
Summary:
In some cases, equality comparisons can be done more efficiently than three-way
comparisons. There are quite a few places in the code where we only care about
equality. This patch adds an Equal() method that defaults to using the
Compare() method.
Test Plan: make clean all check
Reviewers: rven, anthony, yhchiang, igor, sdong
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D46233
Summary:
In the first implementation of BackupEngine, LATEST_BACKUP was the commit point. The backup became committed after the write to LATEST_BACKUP completed.
However, we can avoid the need for LATEST_BACKUP. Instead of write to LATEST_BACKUP, the commit point can be the rename from `meta/<backup_id>.tmp` to `meta/<backup_id>`. Once we see that there exists a file `meta/<backup_id>` (without tmp), we can assume that backup is valid.
In this diff, we still write out the file LATEST_BACKUP. We need to do this so that we can maintain backward compatibility. However, the new version doesn't depend on this file anymore. We get the latest backup by `ls`-ing `meta` directory.
This diff depends on D41925
Test Plan: Adjusted backupable_db_test to this new behavior
Reviewers: benj, yhchiang, sdong, AaronFeldman
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42069
Summary: Add ZSTD compression type. The same way as adding LZ4.
Test Plan: run all tests. Generate files in db_bench. Make sure reads succeed. But the SST files cannot be opened in older versions. Also some other adhoc tests.
Reviewers: rven, anthony, IslamAbdelRahman, kradhakrishnan, igor
Reviewed By: igor
Subscribers: MarkCallaghan, maykov, yoshinorim, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45747
Summary:
It was pointed out to me that the members of SubCompactionState
'earliest_snapshot', 'latest_snapshot' and 'visible_at_tip' are never
modified by the subcompactions, so they can stay as global varaibles
instead to make things simpler.
Test Plan: make all && make check
Reviewers: sdong, igor, noetzli, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45477
Summary:
This patch adds "rocksdb.aggregated-table-properties"
and "rocksdb.aggregated-table-properties-at-levelN", the former
returns the aggreated table properties of a column family,
while the later returns the aggregated table properties
of the specified level N.
Test Plan: Added tests in db_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45087
Summary:
Up until this point we had DbOptions.num_subcompactions, but
it is semantically more correct to call this max_subcompactions since
we will schedule *up to* DbOptions.max_subcompactions smaller compactions
at a time during a compaction job.
I also added a --subcompactions option to db_bench
Test Plan: make all make check
Reviewers: sdong, igor, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D45069
Summary: RandomRWFile is not used anywhere in out code base, this patch remove RandomRWFile
Test Plan:
make check -j64
USE_CLANG=1 make all -j64
OPT=-DROCKSDB_LITE make release -j64
Reviewers: sdong, yhchiang, anthony, kradhakrishnan, rven, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44091
Summary:
Initial implementation of Pessimistic Transactions. This diff contains the api changes discussed in D38913. This diff is pretty large, so let me know if people would prefer to meet up to discuss it.
MyRocks folks: please take a look at the API in include/rocksdb/utilities/transaction[_db].h and let me know if you have any issues.
Also, you'll notice a couple of TODOs in the implementation of RollbackToSavePoint(). After chatting with Siying, I'm going to send out a separate diff for an alternate implementation of this feature that implements the rollback inside of WriteBatch/WriteBatchWithIndex. We can then decide which route is preferable.
Next, I'm planning on doing some perf testing and then integrating this diff into MongoRocks for further testing.
Test Plan: Unit tests, db_bench parallel testing.
Reviewers: igor, rven, sdong, yhchiang, yoshinorim
Reviewed By: sdong
Subscribers: hermanlee4, maykov, spetrunia, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40869
Summary: Prepare release notes for 3.13.
Test Plan: Text only
Reviewers: yhchiang, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D43665
Summary:
Subj. We really need this feature.
Previous diff D40899 has most of the changes to make this possible, this diff just adds the method.
Test Plan: `make check`, the new test fails without this diff; ran with ASAN, TSAN and valgrind.
Reviewers: igor, rven, IslamAbdelRahman, anthony, kradhakrishnan, tnovak, yhchiang, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, maykov, hermanlee4, yoshinorim, tnovak, dhruba
Differential Revision: https://reviews.facebook.net/D40905
Summary:
Introduce DeleteScheduler that allow enforcing a rate limit on file deletion
Instead of deleting files immediately, files are moved to trash directory and deleted in a background thread that apply sleep penalty between deletes if needed.
I have updated PurgeObsoleteFiles and PurgeObsoleteWALFiles to use the delete_scheduler instead of env_->DeleteFile
Test Plan:
added delete_scheduler_test
existing unit tests
Reviewers: kradhakrishnan, anthony, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D43221
Summary:
UpdateAccumulatedStats() is used to optimize compaction decision
esp. when the number of deletion entries are high, but this function
can slowdown DBOpen esp. in disk environment.
This patch adds DBOptions::skip_sats_update_on_db_open, which skips
UpdateAccumulatedStats() in DB::Open() time when it's set to true.
Test Plan: Add DBCompactionTest.SkipStatsUpdateTest
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42843
Summary:
Support RollbackToSavePoint() in WriteBatch and WriteBatchWithIndex. Support for partial transaction rollback is needed for MyRocks.
An alternate implementation of Transaction::RollbackToSavePoint() exists in D40869. However, the other implementation is messier because it is implemented outside of WriteBatch. This implementation is much cleaner and also exposes a potentially useful feature to WriteBatch.
Test Plan: Added unit tests
Reviewers: IslamAbdelRahman, kradhakrishnan, maykov, yoshinorim, hermanlee4, spetrunia, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42723
Summary: Add new CheckFileExists method. Considered changing the FileExists api but didn't want to break anyone's builds.
Test Plan: unit tests
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42003
Summary: It has been around for a while and it looks like it never found any uses in the wild. It's also complicating our compaction_job code quite a bit. We're deprecating it in 3.13, but will put it back in 3.14 if we actually find users that need this feature.
Test Plan: make check
Reviewers: noetzli, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42405
Summary:
Couple of changes here:
* NewBackupEngine() and NewReadOnlyBackupEngine() are now removed. They were deprecated since RocksDB 3.8. Changing these to new functions should be pretty straight-forward. As a followup, I'll fix all fbcode callsights
* Instead of initializing backup engine in the constructor, we initialize it in a separate function now. That way, we can catch all errors and return appropriate status code.
* We catch all errors during initializations and return them to the client properly.
* Added new tests to backupable_db_test, to make sure that we can't open BackupEngine when there are Env errors.
* Transitioned backupable_db_test to use BackupEngine rather than BackupableDB. From the two available APIs, judging by the current use-cases, it looks like BackupEngine API won. It's much more flexible since it doesn't require StackableDB.
Test Plan: Added a new unit test to backupable_db_test
Reviewers: yhchiang, sdong, AaronFeldman
Reviewed By: AaronFeldman
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41925
Summary: This option is guarding the feature implemented 2 and a half years ago: D8991. The feature was enabled by default back then and has been running without issues. There is no reason why any client would turn this feature off. I found no reference in fbcode.
Test Plan: none
Reviewers: sdong, yhchiang, anthony, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42063
Summary:
In one of our recent meetings, we discussed deprecating features that are not being actively used. One of those features, at least within Facebook, is timeout_hint. The feature is really nicely implemented, but if nobody needs it, we should remove it from our code-base (until we get a valid use-case). Some arguments:
* Less code == better icache hit rate, smaller builds, simpler code
* The motivation for adding timeout_hint_us was to work-around RocksDB's stall issue. However, we're currently addressing the stall issue itself (see @sdong's recent work on stall write_rate), so we should never see sharp lock-ups in the future.
* Nobody is using the feature within Facebook's code-base. Googling for `timeout_hint_us` also doesn't yield any users.
Test Plan: make check
Reviewers: anthony, kradhakrishnan, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41937
Summary: This change enables trivial move if all the input files are non onverlapping while doing Universal Compaction.
Test Plan: ./compaction_picker_test and db_test ran successfully with the new testcases.
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40875
Summary: Update HISTORY.md for Listener
Test Plan: no code change
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41325
Summary: About to cut release
Test Plan: none
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41061
Summary:
Add a new field: BackupableDBOptions.max_background_copies.
CreateNewBackup() and RestoreDBFromBackup() will use this number of threads to perform copies.
If there is a backup rate limit, then max_background_copies must be 1.
Update backupable_db_test.cc to test multi-threaded backup and restore.
Update backupable_db_test.cc to test backups when the backup environment is not the same as the database environment.
Test Plan:
Run ./backupable_db_test
Run valgrind ./backupable_db_test
Run with TSAN and ASAN
Reviewers: yhchiang, rven, anthony, sdong, igor
Reviewed By: igor
Subscribers: yhchiang, anthony, sdong, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40725
Summary:
Currently, when we insert something into block cache, we say that the block cache capacity decreased by the size of the block. However, size of the block might be less than the actual memory used by this object. For example, 4.5KB block will actually use 8KB of memory. So even if we configure block cache to 10GB, our actually memory usage of block cache will be 20GB!
This problem showed up a lot in testing and just recently also showed up in MongoRocks production where we were using 30GB more memory than expected.
This diff will fix the problem. Instead of counting the block size, we will count memory used by the block. That way, a block cache configured to be 10GB will actually use only 10GB of memory.
I'm using non-portable function and I couldn't find info on portability on Google. However, it seems to work on Linux, which will cover majority of our use-cases.
Test Plan:
1. fill up mongo instance with 80GB of data
2. restart mongo with block cache size configured to 10GB
3. do a table scan in mongo
4. memory usage before the diff: 12GB. memory usage after the diff: 10.5GB
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40635
Summary: Replace force_bottommost_level_compaction in CompactRangeOption with an option that allow the user to (always skip, always compact, compact if compaction filter is present) the bottommost level for level based compaction.
Test Plan: make check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40527
Summary:
Implementation of a table-level row cache.
It only caches point queries done through the `DB::Get` interface, queries done through the `Iterator` interface will completely skip the cache.
Supports snapshots and merge operations.
Test Plan: Ran `make valgrind_check commit-prereq`
Reviewers: igor, philipp, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39849
Summary:
Currently RocksDB silently ignores this issue and doesn't compress the data. Based on discussion, we agree that this is pretty bad because it can cause confusion for our users.
This patch fails DB::Open() if we don't support the compression that is specified in the options.
Test Plan: make check with LZ4 not present. If Snappy is not present all tests will just fail because Snappy is our default library. We should make Snappy the requirement, since without it our default DB::Open() fails.
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39687
Summary:
Add the funcion Cache.GetPinnedUsage() to return the memory size of entries
that are in use by the system (that is, all the entries not in the LRU list).
Test Plan:
Run ./cache_test and examine PinnedUsageTest.
Reviewers: tnovak, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40305
Summary:
This is https://reviews.facebook.net/D39999 but after introducing an option to force compaction the bottom most level
Changes in this patch
- Introduce force_bottommost_level_compaction to CompactRangeOptions that force compacting bottommost level during compaction
- Skip bottommost level compaction if we dont have a compaction filter and force_bottommost_level_compaction options is not set
Although tests pass on my machine but I suspect that there maybe some tests that I am not aware of that should use force_bottommost_level_compaction to pass in a deterministic way
Test Plan:
make check
adding new tests
Reviewers: igor, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40059
Summary:
This diff update DB::CompactRange to use RangeCompactionOptions instead of using multiple parameters
Old CompactRange is still available but deprecated
Test Plan:
make all check
make rocksdbjava
USE_CLANG=1 make all
OPT=-DROCKSDB_LITE make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40209
Summary:
Add an option in GetApproximateSize() so that the result will include estimated sizes in mem tables.
To implement it, implement an estimated count from the beginning to a key in skip list. The approach is to count to find the entry, how many Next() is issued from each level, and sum them with a weight that is <branching factor> ^ <level>.
Test Plan: Add a test case
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D40119
Summary:
This is part of an effort to better understand and optimize RocksDB stalls under high load. I added a feature to db_bench to periodically write QPS to CSV files. That way we can nicely see how our QPS changes in time (especially when DB is stalled) and can do a better job of evaluating our stall system (i.e. we want the QPS to be as constant as possible, as opposed to having bunch of stalls)
Cool part of CSV files is that we can easily graph them -- there are a bunch of tools available.
Test Plan:
Ran ./db_bench --report_interval_seconds=10 --benchmarks=fillrandom --num=10000000
and observed this in report.csv:
secs_elapsed,interval_qps
10,2725860
20,1980480
30,1863456
40,1454359
50,1460389
Reviewers: sdong, MarkCallaghan, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D40047
Summary:
We slow down data into the database to the rate of options.delayed_write_rate (a new option) with this patch.
The thread synchronization approach I take is to still synchronize write controller by DB mutex and GetDelay() is inside DB mutex. Try to minimize the frequency of getting time in GetDelay(). I verified it through db_bench and it seems to work
hard_rate_limit is deprecated.
options.delayed_write_rate is still not dynamically changeable. Need to work on it as a follow-up.
Test Plan: Add new unit tests in db_test
Reviewers: yhchiang, rven, kradhakrishnan, anthony, MarkCallaghan, igor
Reviewed By: igor
Subscribers: ikabiljo, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D36351
Summary:
[This is the resubmit of D39813. Tests were failing, so I reverted the diff. I found the bug and I'm now resubmitting]
If we don't do this, any calls to Entry() after WBWI mutation will result in undefined behavior. We need to re-fetch the offset from the skip list and regenerate the new pointer (because string's base pointer can change while mutating).
Test Plan: COMPILE_WITH_ASAN=1 make write_batch_with_index_test && ./write_batch_with_index_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39897
Summary: If we don't do this, any calls to Entry() after WBWI mutation will result in undefined behavior. We need to re-fetch the offset from the skip list and regenerate the new pointer (because string's base pointer can change while mutating).
Test Plan: COMPILE_WITH_ASAN=1 make write_batch_with_index_test && ./write_batch_with_index_test
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39813
Summary:
There is a hang during DB close in the following scenario:
a) a load with WAL disabled was done,
b) CancelAllBackgroundWork was called,
c) DB Close was called
This was because in that we will wait for a flush but we cannot do a
background flush because we have called CancelAllBackgroundWork which
marks the DB as shutting downn.
Test Plan: Added DBTest FlushOnDestroy
Reviewers: sdong
Reviewed By: sdong
Subscribers: yoshinorim, hermanlee4, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39747
Summary:
Replacing the default value for compaction_filter_factory and compaction_filter_factory_v2 to be nullptr instead of DefaultCompactionFilterFactory / DefaultCompactionFilterFactoryV2
The reason for this is to be able to determine easily if we have compaction filter factory or not without depending on RTTI
Test Plan: make check
Reviewers: yoshinorim, ott, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D39693
Summary:
EventListener::OnFlushCompleted() now passes a structure instead
of a list of parameters. This minimizes the API change in the
future.
Test Plan:
listener_test
compact_files_test
example/compact_files_example
Reviewers: kradhakrishnan, sdong, IslamAbdelRahman, rven, igor
Reviewed By: rven, igor
Subscribers: IslamAbdelRahman, rven, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D39543
Summary: In DB::CompactRange(), change parameter "reduce_level" to "change_level". Users can compact all data to the last level if needed. By doing it, users can migrate the DB to options.level_compaction_dynamic_level_bytes=true.
Test Plan: Add a unit test for it.
Reviewers: yhchiang, anthony, kradhakrishnan, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D39099
Summary: Optimistic transactions supporting begin/commit/rollback semantics. Currently relies on checking the memtable to determine if there are any collisions at commit time. Not yet implemented would be a way of enuring the memtable has some minimum amount of history so that we won't fail to commit when the memtable is empty. You should probably start with transaction.h to get an overview of what is currently supported.
Test Plan: Added a new test, but still need to look into stress testing.
Reviewers: yhchiang, igor, rven, sdong
Reviewed By: sdong
Subscribers: adamretter, MarkCallaghan, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D33435
Summary:
For transactions, we are using the memtables to validate that there are no write conflicts. But after flushing, we don't have any memtables, and transactions could fail to commit. So we want to someone keep around some extra history to use for conflict checking. In addition, we want to provide a way to increase the size of this history if too many transactions fail to commit.
After chatting with people, it seems like everyone prefers just using Memtables to store this history (instead of a separate history structure). It seems like the best place for this is abstracted inside the memtable_list. I decide to create a separate list in MemtableListVersion as using the same list complicated the flush/installalflushresults logic too much.
This diff adds a new parameter to control how much memtable history to keep around after flushing. However, it sounds like people aren't too fond of adding new parameters. So I am making the default size of flushed+not-flushed memtables be set to max_write_buffers. This should not change the maximum amount of memory used, but make it more likely we're using closer the the limit. (We are now postponing deleting flushed memtables until the max_write_buffer limit is reached). So while we might use more memory on average, we are still obeying the limit set (and you could argue it's better to go ahead and use up memory now instead of waiting for a write stall to happen to test this limit).
However, if people are opposed to this default behavior, we can easily set it to 0 and require this parameter be set in order to use transactions.
Test Plan: Added a xfunc test to play around with setting different values of this parameter in all tests. Added testing in memtablelist_test and planning on adding more testing here.
Reviewers: sdong, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37443
