Summary:
In RocksDB DBOptions::skip_log_error_on_recovery is marked as
"NOT SUPPORTED" for a long time, and setting this option does not have
any effect on the behavior of RocksDB library. Therefore, we are removing it
in the upcoming 7.0 release.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9434
Test Plan: CircleCI
Reviewed By: ajkr
Differential Revision: D33763015
Pulled By: akankshamahajan15
fbshipit-source-id: 11f09643298da6c02d3dcdb090b996f4c3cfdd76
Summary:
The API is deprecated long time ago. Clean up the codebase by
removing it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9462
Test Plan: CI, fake release: D33835220
Reviewed By: riversand963
Differential Revision: D33835103
Pulled By: jay-zhuang
fbshipit-source-id: 6d2dc12c8e7fdbe2700865a3e61f0e3f78bd8184
Summary:
**Context/Summary:**
AdvancedColumnFamilyOptions::soft_rate_limit/hard_rate_limit have been marked as deprecated and it's time to actually remove the code.
- Keep `soft_rate_limit`/`hard_rate_limit` in `cf_mutable_options_type_info` to prevent throwing `InvalidArgument` in `GetColumnFamilyOptionsFromMap` when reading an option file still with these options (e.g, old option file generated from RocksDB before the deprecation)
- Keep `soft_rate_limit`/`hard_rate_limit` in under `OptionsOldApiTest.GetOptionsFromMapTest` to test the case mentioned above.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9452
Test Plan: Rely on my eyeball and CI
Reviewed By: ajkr
Differential Revision: D33804938
Pulled By: hx235
fbshipit-source-id: 133d49f7ec5238d7efceeb0a3122a5792a2b9945
Summary:
Add an option to set the WAL compression algorithm - wal_compression.
TODO: WAL compression is not implemented and will only support zstd initially. Will be added in subsequent diffs.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9432
Reviewed By: pdillinger
Differential Revision: D33797275
Pulled By: sidroyc
fbshipit-source-id: 8db81d9c9cea5e2e4f1445d3aecad8106137b8e7
Summary:
The patch adds a new BlobDB configuration option `blob_compaction_readahead_size`
that can be used to enable prefetching data from blob files during compaction.
This is important when using storage with higher latencies like HDDs or remote filesystems.
If enabled, prefetching is used for all cases when blobs are read during compaction,
namely garbage collection, compaction filters (when the existing value has to be read from
a blob file), and `Merge` (when the value of the base `Put` is stored in a blob file).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9187
Test Plan: Ran `make check` and the stress/crash test.
Reviewed By: riversand963
Differential Revision: D32565512
Pulled By: ltamasi
fbshipit-source-id: 87be9cebc3aa01cc227bec6b5f64d827b8164f5d
Summary:
Note: This PR is the 4th part of a bigger PR stack (https://github.com/facebook/rocksdb/pull/9073) and will rebase/merge only after the first three PRs (https://github.com/facebook/rocksdb/pull/9070, https://github.com/facebook/rocksdb/pull/9071, https://github.com/facebook/rocksdb/pull/9130) merge.
**Context:**
Similar to https://github.com/facebook/rocksdb/pull/8428, this PR is to track memory usage during (new) Bloom Filter (i.e,FastLocalBloom) and Ribbon Filter (i.e, Ribbon128) construction, moving toward the goal of [single global memory limit using block cache capacity](https://github.com/facebook/rocksdb/wiki/Projects-Being-Developed#improving-memory-efficiency). It also constrains the size of the banding portion of Ribbon Filter during construction by falling back to Bloom Filter if that banding is, at some point, larger than the available space in the cache under `LRUCacheOptions::strict_capacity_limit=true`.
The option to turn on this feature is `BlockBasedTableOptions::reserve_table_builder_memory = true` which by default is set to `false`. We [decided](https://github.com/facebook/rocksdb/pull/9073#discussion_r741548409) not to have separate option for separate memory user in table building therefore their memory accounting are all bundled under one general option.
**Summary:**
- Reserved/released cache for creation/destruction of three main memory users with the passed-in `FilterBuildingContext::cache_res_mgr` during filter construction:
- hash entries (i.e`hash_entries`.size(), we bucket-charge hash entries during insertion for performance),
- banding (Ribbon Filter only, `bytes_coeff_rows` +`bytes_result_rows` + `bytes_backtrack`),
- final filter (i.e, `mutable_buf`'s size).
- Implementation details: in order to use `CacheReservationManager::CacheReservationHandle` to account final filter's memory, we have to store the `CacheReservationManager` object and `CacheReservationHandle` for final filter in `XXPH3BitsFilterBuilder` as well as explicitly delete the filter bits builder when done with the final filter in block based table.
- Added option fo run `filter_bench` with this memory reservation feature
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9073
Test Plan:
- Added new tests in `db_bloom_filter_test` to verify filter construction peak cache reservation under combination of `BlockBasedTable::Rep::FilterType` (e.g, `kFullFilter`, `kPartitionedFilter`), `BloomFilterPolicy::Mode`(e.g, `kFastLocalBloom`, `kStandard128Ribbon`, `kDeprecatedBlock`) and `BlockBasedTableOptions::reserve_table_builder_memory`
- To address the concern for slow test: tests with memory reservation under `kFullFilter` + `kStandard128Ribbon` and `kPartitionedFilter` take around **3000 - 6000 ms** and others take around **1500 - 2000 ms**, in total adding **20000 - 25000 ms** to the test suit running locally
- Added new test in `bloom_test` to verify Ribbon Filter fallback on large banding in FullFilter
- Added test in `filter_bench` to verify that this feature does not significantly slow down Bloom/Ribbon Filter construction speed. Local result averaged over **20** run as below:
- FastLocalBloom
- baseline `./filter_bench -impl=2 -quick -runs 20 | grep 'Build avg'`:
- **Build avg ns/key: 29.56295** (DEBUG_LEVEL=1), **29.98153** (DEBUG_LEVEL=0)
- new feature (expected to be similar as above)`./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg'`:
- **Build avg ns/key: 30.99046** (DEBUG_LEVEL=1), **30.48867** (DEBUG_LEVEL=0)
- new feature of RibbonFilter with fallback (expected to be similar as above) `./filter_bench -impl=2 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` :
- **Build avg ns/key: 31.146975** (DEBUG_LEVEL=1), **30.08165** (DEBUG_LEVEL=0)
- Ribbon128
- baseline `./filter_bench -impl=3 -quick -runs 20 | grep 'Build avg'`:
- **Build avg ns/key: 129.17585** (DEBUG_LEVEL=1), **130.5225** (DEBUG_LEVEL=0)
- new feature (expected to be similar as above) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true | grep 'Build avg' `:
- **Build avg ns/key: 131.61645** (DEBUG_LEVEL=1), **132.98075** (DEBUG_LEVEL=0)
- new feature of RibbonFilter with fallback (expected to be a lot faster than above due to fallback) `./filter_bench -impl=3 -quick -runs 20 -reserve_table_builder_memory=true -strict_capacity_limit=true | grep 'Build avg'` :
- **Build avg ns/key: 52.032965** (DEBUG_LEVEL=1), **52.597825** (DEBUG_LEVEL=0)
- And the warning message of `"Cache reservation for Ribbon filter banding failed due to cache full"` is indeed logged to console.
Reviewed By: pdillinger
Differential Revision: D31991348
Pulled By: hx235
fbshipit-source-id: 9336b2c60f44d530063da518ceaf56dac5f9df8e
Summary:
Currently, if Secondary Cache is provided to the lru cache, it is used by default. We add CacheTier to advanced_options.h to describe the cache tier we used. Add a `lowest_used_cache_tier` option to `DBOptions` (immutable) and pass it to BlockBasedTableReader to decide if secondary cache will be used or not. By default it is `CacheTier::kNonVolatileTier`, which means, we always use both block cache (kVolatileTier) and secondary cache (kNonVolatileTier). By set it to `CacheTier::kVolatileTier`, the DB will not use the secondary cache.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/9050
Test Plan: added new tests
Reviewed By: anand1976
Differential Revision: D31744769
Pulled By: zhichao-cao
fbshipit-source-id: a0575ebd23e1c6dfcfc2b4c8578764e73b15bce6
Summary:
The current BlobDB garbage collection logic works by relocating the valid
blobs from the oldest blob files as they are encountered during compaction,
and cleaning up blob files once they contain nothing but garbage. However,
with sufficiently skewed workloads, it is theoretically possible to end up in a
situation when few or no compactions get scheduled for the SST files that contain
references to the oldest blob files, which can lead to increased space amp due
to the lack of GC.
In order to efficiently handle such workloads, the patch adds a new BlobDB
configuration option called `blob_garbage_collection_force_threshold`,
which signals to BlobDB to schedule targeted compactions for the SST files
that keep alive the oldest batch of blob files if the overall ratio of garbage in
the given blob files meets the threshold *and* all the given blob files are
eligible for GC based on `blob_garbage_collection_age_cutoff`. (For example,
if the new option is set to 0.9, targeted compactions will get scheduled if the
sum of garbage bytes meets or exceeds 90% of the sum of total bytes in the
oldest blob files, assuming all affected blob files are below the age-based cutoff.)
The net result of these targeted compactions is that the valid blobs in the oldest
blob files are relocated and the oldest blob files themselves cleaned up (since
*all* SST files that rely on them get compacted away).
These targeted compactions are similar to periodic compactions in the sense
that they force certain SST files that otherwise would not get picked up to undergo
compaction and also in the sense that instead of merging files from multiple levels,
they target a single file. (Note: such compactions might still include neighboring files
from the same level due to the need of having a "clean cut" boundary but they never
include any files from any other level.)
This functionality is currently only supported with the leveled compaction style
and is inactive by default (since the default value is set to 1.0, i.e. 100%).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8994
Test Plan: Ran `make check` and tested using `db_bench` and the stress/crash tests.
Reviewed By: riversand963
Differential Revision: D31489850
Pulled By: ltamasi
fbshipit-source-id: 44057d511726a0e2a03c5d9313d7511b3f0c4eab
Summary:
Old typedef syntax is confusing
Most but not all changes with
perl -pi -e 's/typedef (.*) ([a-zA-Z0-9_]+);/using $2 = $1;/g' list_of_files
make format
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8751
Test Plan: existing
Reviewed By: zhichao-cao
Differential Revision: D30745277
Pulled By: pdillinger
fbshipit-source-id: 6f65f0631c3563382d43347896020413cc2366d9
Summary:
Some FIFO users want to keep the data for longer, but the old data is rarely accessed. This feature allows users to configure FIFO compaction so that data older than a threshold is moved to a warm storage tier.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8310
Test Plan: Add several unit tests.
Reviewed By: ajkr
Differential Revision: D28493792
fbshipit-source-id: c14824ea634814dee5278b449ab5c98b6e0b5501
Summary:
This PR prepopulates warm/hot data blocks which are already in memory
into block cache at the time of flush. On a flush, the data block that is
in memory (in memtables) get flushed to the device. If using Direct IO,
additional IO is incurred to read this data back into memory again, which
is avoided by enabling newly added option.
Right now, this is enabled only for flush for data blocks. We plan to
expand this option to cover compactions in the future and for other types
of blocks.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8242
Test Plan: Add new unit test
Reviewed By: anand1976
Differential Revision: D28521703
Pulled By: akankshamahajan15
fbshipit-source-id: 7219d6958821cedce689a219c3963a6f1a9d5f05
Summary:
When a memtable is flushed, it will validate number of entries it reads, and compare the number with how many entries inserted into memtable. This serves as one sanity c\
heck against memory corruption. This change will also allow more counters to be added in the future for better validation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8288
Test Plan: Pass all existing tests
Reviewed By: ajkr
Differential Revision: D28369194
fbshipit-source-id: 7ff870380c41eab7f99eee508550dcdce32838ad
Summary:
As the first part of the effort of having placing different files on different storage types, this change introduces several things:
(1) An experimental interface in FileSystem that specify temperature to a new file created.
(2) A test FileSystemWrapper, SimulatedHybridFileSystem, that simulates HDD for a file of "warm" temperature.
(3) A simple experimental feature ColumnFamilyOptions.bottommost_temperature. RocksDB would pass this value to FileSystem when creating any bottommost file.
(4) A db_bench parameter that applies the (2) and (3) to db_bench.
The motivation of the change is to introduce minimal changes that allow us to evolve tiered storage development.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8222
Test Plan:
./db_bench --benchmarks=fillrandom --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -level_compaction_dynamic_level_bytes --reads=100 -compaction_readahead_size=20000000 --reads=100000 -num=10000000
followed by
./db_bench --benchmarks=readrandom,stats --write_buffer_size=2000000 -max_bytes_for_level_base=20000000 -simulate_hybrid_fs_file=/tmp/warm_file_list -level_compaction_dynamic_level_bytes -compaction_readahead_size=20000000 --reads=500 --threads=16 -use_existing_db --num=10000000
and see results as expected.
Reviewed By: ajkr
Differential Revision: D28003028
fbshipit-source-id: 4724896d5205730227ba2f17c3fecb11261744ce
Summary:
RocksDB does auto-readahead for iterators on noticing more
than two reads for a table file. The readahead starts at 8KB and doubles on every
additional read upto BlockBasedTable::kMaxAutoReadAheadSize which is
256*1024.
This PR adds a new option BlockBasedTableOptions::max_auto_readahead_size which
replaces BlockBasedTable::kMaxAutoReadAheadSize and the new option can be
configured.
If max_auto_readahead_size is set 0 then no implicit auto prefetching will
be done. If max_auto_readahead_size provided is less than
8KB (which is initial readahead size used by rocksdb in case of
auto-readahead), readahead size will remain same as max_auto_readahead_size.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7951
Test Plan: Add new unit test case.
Reviewed By: anand1976
Differential Revision: D26568085
Pulled By: akankshamahajan15
fbshipit-source-id: b6543520fc74e97d859f2002328d4c5254d417af
Summary:
For dictionary compression, we need to collect some representative samples of the data to be compressed, which we use to either generate or train (when `CompressionOptions::zstd_max_train_bytes > 0`) a dictionary. Previously, the strategy was to buffer all the data blocks during flush, and up to the target file size during compaction. That strategy allowed us to randomly pick samples from as wide a range as possible that'd be guaranteed to land in a single output file.
However, some users try to make huge files in memory-constrained environments, where this strategy can cause OOM. This PR introduces an option, `CompressionOptions::max_dict_buffer_bytes`, that limits how much data blocks are buffered before we switch to unbuffered mode (which means creating the per-SST dictionary, writing out the buffered data, and compressing/writing new blocks as soon as they are built). It is not strict as we currently buffer more than just data blocks -- also keys are buffered. But it does make a step towards giving users predictable memory usage.
Related changes include:
- Changed sampling for dictionary compression to select unique data blocks when there is limited availability of data blocks
- Made use of `BlockBuilder::SwapAndReset()` to save an allocation+memcpy when buffering data blocks for building a dictionary
- Changed `ParseBoolean()` to accept an input containing characters after the boolean. This is necessary since, with this PR, a value for `CompressionOptions::enabled` is no longer necessarily the final component in the `CompressionOptions` string.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7970
Test Plan:
- updated `CompressionOptions` unit tests to verify limit is respected (to the extent expected in the current implementation) in various scenarios of flush/compaction to bottommost/non-bottommost level
- looked at jemalloc heap profiles right before and after switching to unbuffered mode during flush/compaction. Verified memory usage in buffering is proportional to the limit set.
Reviewed By: pdillinger
Differential Revision: D26467994
Pulled By: ajkr
fbshipit-source-id: 3da4ef9fba59974e4ef40e40c01611002c861465
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523
Test Plan: add new unit test, pass make check/ make asan_check
Reviewed By: pdillinger
Differential Revision: D24313271
Pulled By: zhichao-cao
fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
Summary:
"allow_data_in_errors" is not updated in BuildOptions. So it
would assume default value when BuildOptions is called.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7665
Test Plan: make check -j64
Reviewed By: zhichao-cao
Differential Revision: D24929100
Pulled By: akankshamahajan15
fbshipit-source-id: dd6225a6c9f13b20027ff1b6de8e79801b57b3f7
Summary:
This patch simply adds a couple of options that will enable users to
configure garbage collection when using the integrated BlobDB
implementation. The actual GC logic will be added in a separate step.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7661
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D24906544
Pulled By: ltamasi
fbshipit-source-id: ee0e056a712a4b4475cd90de8b27d969bd61b7e1
Summary:
This PR adds support for writing a location identifier of the DB host to SST files as a table property. By default, the hostname is used, but can be overridden by the user. There have been some recent corruptions in files written by ```SstFileWriter``` before checksumming, so this property can be used to trace it back to the writing host and checking the host for hardware isues.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7479
Test Plan: Add new unit tests
Reviewed By: pdillinger
Differential Revision: D24340671
Pulled By: anand1976
fbshipit-source-id: 2038949fd8d160c0633ccb4f9da77740f19fa2a2
Summary:
The old flag-based APIs (`BlockBasedTableOptions::pin_l0_filter_and_index_blocks_in_cache` and `BlockBasedTableOptions::pin_top_level_index_and_filter`) were insufficient for our needs. For example, it was impossible to pin only unpartitioned meta-blocks, which could prevent block cache contention when turning on dictionary compression or during a migration to partitioned indexes/filters. It was also impossible to pin all meta-blocks in memory while having predictable memory usage via block cache. If we had continued adding flags to address these scenarios, they would have had significant overlap causing confusion. Instead, this PR deprecates the flags and starts a new API with non-overlapping options.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7520
Test Plan:
- new unit test
- added new options to stress/crash test and ran for a while: `$ python tools/db_crashtest.py blackbox --simple --max_key=1000000 -write_buffer_size=1048576 -target_file_size_base=1048576 -max_bytes_for_level_base=4194304 --interval=10 -value_size_mult=33 -column_families=1 -reopen=0`
Reviewed By: pdillinger
Differential Revision: D24200034
Pulled By: ajkr
fbshipit-source-id: 3fa7cfc71e7960f7a867511dd6ae5834dd73b13e
Summary:
This option determines whether WALs will be tracked in MANIFEST and verified on recovery.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7275
Test Plan:
db_options_test
options_test
Reviewed By: pdillinger
Differential Revision: D23181418
Pulled By: cheng-chang
fbshipit-source-id: 5dd1cdc166f3dfc1c93c094df4a2f7734e3b4547
Summary:
Introduce an new option options.check_flush_compaction_key_order, by default set to true, which checks key order of flush and compaction, and fail the operation if the order is violated.
Also did minor refactor hash checking code, which consolidates the hashing logic to a vlidation class, where the key ordering logic is added.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7467
Test Plan: Add unit tests to validate the check can catch reordering in flush and compaction, and can be properly disabled.
Reviewed By: riversand963
Differential Revision: D24010683
fbshipit-source-id: 8dd6292d2cda8006054e9ded7cfa4bf405f0527c
Summary:
This PR merges the functionality of making the ColumnFamilyOptions, TableFactory, and DBOptions into Configurable into a single PR, resolving any merge conflicts
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5753
Reviewed By: ajkr
Differential Revision: D23385030
Pulled By: zhichao-cao
fbshipit-source-id: 8b977a7731556230b9b8c5a081b98e49ee4f160a
Summary:
SST Partitioner interface that allows to split SST files during compactions.
It basically instruct compaction to create a new file when needed. When one is using well defined prefixes and prefixed way of defining tables it is good to define also partitioning so that promotion of some SST file does not cover huge key space on next level (worst case complete space).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6957
Reviewed By: ajkr
Differential Revision: D22461239
fbshipit-source-id: 9ce07bba08b3ba89c2d45630520368f704d1316e
Summary:
In current codebase, in write path, if Retryable IO Error happens, SetBGError is called. The retryable IO Error is converted to hard error and DB is in read only mode. User or application needs to resume it. In this PR, if Retryable IO Error happens in one DB, SetBGError will create a new thread to call Resume (auto resume). otpions.max_bgerror_resume_count controls if auto resume is enabled or not (if max_bgerror_resume_count<=0, auto resume will not be enabled). options.bgerror_resume_retry_interval controls the time interval to call Resume again if the previous resume fails due to the Retryable IO Error. If non-retryable error happens during resume, auto resume will terminate.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6765
Test Plan: Added the unit test cases in error_handler_fs_test and pass make asan_check
Reviewed By: anand1976
Differential Revision: D21916789
Pulled By: zhichao-cao
fbshipit-source-id: acb8b5e5dc3167adfa9425a5b7fc104f6b95cb0b
Summary:
New experimental option BBTO::optimize_filters_for_memory builds
filters that maximize their use of "usable size" from malloc_usable_size,
which is also used to compute block cache charges.
Rather than always "rounding up," we track state in the
BloomFilterPolicy object to mix essentially "rounding down" and
"rounding up" so that the average FP rate of all generated filters is
the same as without the option. (YMMV as heavily accessed filters might
be unluckily lower accuracy.)
Thus, the option near-minimizes what the block cache considers as
"memory used" for a given target Bloom filter false positive rate and
Bloom filter implementation. There are no forward or backward
compatibility issues with this change, though it only works on the
format_version=5 Bloom filter.
With Jemalloc, we see about 10% reduction in memory footprint (and block
cache charge) for Bloom filters, but 1-2% increase in storage footprint,
due to encoding efficiency losses (FP rate is non-linear with bits/key).
Why not weighted random round up/down rather than state tracking? By
only requiring malloc_usable_size, we don't actually know what the next
larger and next smaller usable sizes for the allocator are. We pick a
requested size, accept and use whatever usable size it has, and use the
difference to inform our next choice. This allows us to narrow in on the
right balance without tracking/predicting usable sizes.
Why not weight history of generated filter false positive rates by
number of keys? This could lead to excess skew in small filters after
generating a large filter.
Results from filter_bench with jemalloc (irrelevant details omitted):
(normal keys/filter, but high variance)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.6278
Number of filters: 5516
Total size (MB): 200.046
Reported total allocated memory (MB): 220.597
Reported internal fragmentation: 10.2732%
Bits/key stored: 10.0097
Average FP rate %: 0.965228
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=30000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.5104
Number of filters: 5464
Total size (MB): 200.015
Reported total allocated memory (MB): 200.322
Reported internal fragmentation: 0.153709%
Bits/key stored: 10.1011
Average FP rate %: 0.966313
(very few keys / filter, optimization not as effective due to ~59 byte
internal fragmentation in blocked Bloom filter representation)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.5649
Number of filters: 162950
Total size (MB): 200.001
Reported total allocated memory (MB): 224.624
Reported internal fragmentation: 12.3117%
Bits/key stored: 10.2951
Average FP rate %: 0.821534
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 31.8057
Number of filters: 159849
Total size (MB): 200
Reported total allocated memory (MB): 208.846
Reported internal fragmentation: 4.42297%
Bits/key stored: 10.4948
Average FP rate %: 0.811006
(high keys/filter)
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9
Build avg ns/key: 29.7017
Number of filters: 164
Total size (MB): 200.352
Reported total allocated memory (MB): 221.5
Reported internal fragmentation: 10.5552%
Bits/key stored: 10.0003
Average FP rate %: 0.969358
$ ./filter_bench -quick -impl=2 -average_keys_per_filter=1000000 -vary_key_count_ratio=0.9 -optimize_filters_for_memory
Build avg ns/key: 30.7131
Number of filters: 160
Total size (MB): 200.928
Reported total allocated memory (MB): 200.938
Reported internal fragmentation: 0.00448054%
Bits/key stored: 10.1852
Average FP rate %: 0.963387
And from db_bench (block cache) with jemalloc:
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ ./db_bench -db=/dev/shm/dbbench -benchmarks=fillrandom -format_version=5 -value_size=90 -bloom_bits=10 -num=2000000 -threads=8 -optimize_filters_for_memory -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false
$ (for FILE in /dev/shm/dbbench.no_optimize/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17063835
$ (for FILE in /dev/shm/dbbench/*.sst; do ./sst_dump --file=$FILE --show_properties | grep 'filter block' ; done) | awk '{ t += $4; } END { print t; }'
17430747
$ #^ 2.1% additional filter storage
$ ./db_bench -db=/dev/shm/dbbench.no_optimize -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8440400
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 21087528
rocksdb.bloom.filter.useful COUNT : 4963889
rocksdb.bloom.filter.full.positive COUNT : 1214081
rocksdb.bloom.filter.full.true.positive COUNT : 1161999
$ #^ 1.04 % observed FP rate
$ ./db_bench -db=/dev/shm/dbbench -use_existing_db -benchmarks=readrandom,stats -statistics -bloom_bits=10 -num=2000000 -compaction_style=2 -fifo_compaction_max_table_files_size_mb=10000 -fifo_compaction_allow_compaction=false -optimize_filters_for_memory -duration=10 -cache_index_and_filter_blocks -cache_size=1000000000
rocksdb.block.cache.index.add COUNT : 33
rocksdb.block.cache.index.bytes.insert COUNT : 8448592
rocksdb.block.cache.filter.add COUNT : 33
rocksdb.block.cache.filter.bytes.insert COUNT : 18220328
rocksdb.bloom.filter.useful COUNT : 5360933
rocksdb.bloom.filter.full.positive COUNT : 1321315
rocksdb.bloom.filter.full.true.positive COUNT : 1262999
$ #^ 1.08 % observed FP rate, 13.6% less memory usage for filters
(Due to specific key density, this example tends to generate filters that are "worse than average" for internal fragmentation. "Better than average" cases can show little or no improvement.)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6427
Test Plan: unit test added, 'make check' with gcc, clang and valgrind
Reviewed By: siying
Differential Revision: D22124374
Pulled By: pdillinger
fbshipit-source-id: f3e3aa152f9043ddf4fae25799e76341d0d8714e
Summary:
The current way of implementing CompressionOptions.parallel_threads introduces a format change. We plan to change CompressionOptions's serailization format to a new JSON-like format, which would be another format change. We would like to consolidate the two format changes into one, rather than making some users to change twice. Hold CompressionOptions.parallel_threads from being supported by option string for now. Will add it back after the general CompressionOptions's format change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6782
Test Plan: Run all existing tests.
Reviewed By: zhichao-cao
Differential Revision: D21338614
fbshipit-source-id: bca2dac3cb37d4e6e64b52cbbe8ea749cd848685
Summary:
https://github.com/facebook/rocksdb/pull/6668 added some new test code but it has a risk of memory corruption. Fix it
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6676
Test Plan: Run the test under ASAN and see it passes.
Reviewed By: ajkr
Differential Revision: D20937108
fbshipit-source-id: 22cc96bb02030df0a37a02e67a2cc37ca31ba22d
Summary:
… to CFOptions
https://github.com/facebook/rocksdb/pull/6615 made several compression related options dynamically changeable. They are moved to MutableCFOptions. However, they are not copied back to ColumnFamilyOptions, so the changed values are not written to option files and for some other uses. Fix it by copying them back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6668
Test Plan: Add a unit test to make sure that when a MutableCFOptions is converted to CFOptions and back to MutableCFOptions, they stay the same. This test would fail without the fix.
Reviewed By: ajkr
Differential Revision: D20923999
fbshipit-source-id: c3bccd6923b00d677764e2269bed6a95ad7ed780
Summary:
In the current implementation, sst file checksum is calculated by a shared checksum function object, which may make some checksum function hard to be applied here such as SHA1. In this implementation, each sst file will have its own checksum generator obejct, created by FileChecksumGenFactory. User needs to implement its own FilechecksumGenerator and Factory to plugin the in checksum calculation method.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6600
Test Plan: tested with make asan_check
Reviewed By: riversand963
Differential Revision: D20717670
Pulled By: zhichao-cao
fbshipit-source-id: 2a74c1c280ac11a07a1980185b43b671acaa71c6
Summary:
The current Env/FileSystem API separation has a couple of issues -
1. It requires the user to specify 2 options - ```Options::env``` and ```Options::file_system``` - which means they have to make code changes to benefit from the new APIs. Furthermore, there is a risk of accessing the same APIs in two different ways, through Env in the old way and through FileSystem in the new way. The two may not always match, for example, if env is ```PosixEnv``` and FileSystem is a custom implementation. Any stray RocksDB calls to env will use the ```PosixEnv``` implementation rather than the file_system implementation.
2. There needs to be a simple way for the FileSystem developer to instantiate an Env for backward compatibility purposes.
This PR solves the above issues and simplifies the migration in the following ways -
1. Embed a shared_ptr to the ```FileSystem``` in the ```Env```, and remove ```Options::file_system``` as a configurable option. This way, no code changes will be required in application code to benefit from the new API. The default Env constructor uses a ```LegacyFileSystemWrapper``` as the embedded ```FileSystem```.
1a. - This also makes it more robust by ensuring that even if RocksDB
has some stray calls to Env APIs rather than FileSystem, they will go
through the same object and thus there is no risk of getting out of
sync.
2. Provide a ```NewCompositeEnv()``` API that can be used to construct a
PosixEnv with a custom FileSystem implementation. This eliminates an
indirection to call Env APIs, and relieves the FileSystem developer of
the burden of having to implement wrappers for the Env APIs.
3. Add a couple of missing FileSystem APIs - ```SanitizeEnvOptions()``` and
```NewLogger()```
Tests:
1. New unit tests
2. make check and make asan_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6552
Reviewed By: riversand963
Differential Revision: D20592038
Pulled By: anand1976
fbshipit-source-id: c3801ad4153f96d21d5a3ae26c92ba454d1bf1f7
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.
Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334
Reviewed By: anand1976
Differential Revision: D19778960
Pulled By: riversand963
fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.
If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.
We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353
Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.
Differential Revision: D19656425
Pulled By: al13n321
fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
Some recent commits might not have passed through the formatter. I formatted recent 45 commits. The script hangs for more commits so I stopped there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5827
Test Plan: Run all existing tests.
Differential Revision: D17483727
fbshipit-source-id: af23113ee63015d8a43d89a3bc2c1056189afe8f
Summary:
The max batch size that we can write to the WAL is controlled by a static manner. So if the leader write is less than 128 KB we will have the batch size as leader write size + 128 KB else the limit will be 1 MB. Both of them are statically defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5759
Differential Revision: D17329298
fbshipit-source-id: a3d910629d8d8ca84ea39ad89c2b2d284571ded5
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725
Test Plan: Added unit tests.
Differential Revision: D16963840
Pulled By: vjnadimpalli
fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
Added log_readahead_size option to control prefetching for Log::Reader.
This is mostly useful for reading a remotely located log, as it can save the number of round-trips when reading it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5592
Differential Revision: D16362989
Pulled By: elipoz
fbshipit-source-id: c5d4d5245a44008cd59879640efff70c091ad3e8
Summary:
This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046
Differential Revision: D15863138
Pulled By: miasantreble
fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
