Summary:
When reading from kBlockCacheTier, ForwardIterator's internal child iterators
may end up in the incomplete state (read was unable to complete without doing
disk I/O). `ForwardIterator::status()` will correctly report that; however, the
iterator may be stuck in that state until all sub-iterators are rebuilt:
* `NeedToSeekImmutable()` may return false even if some sub-iterators are
incomplete
* one of the child iterators may be an empty iterator without any state other
that the kIncomplete status (created using `NewErrorIterator()`); seeking on
any such iterator has no effect -- we need to construct it again
Akin to rebuilding iterators after a superversion bump, this diff makes forward
iterator reset all incomplete child iterators when `Seek()` or `Next()` are
called.
Test Plan: TEST_TMPDIR=/dev/shm/rocksdbtest ROCKSDB_TESTS=TailingIterator ./db_test
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: lovro, march, leveldb
Differential Revision: https://reviews.facebook.net/D22575
Summary: It is too expensive to bump ticker to every key/vaue pair
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22527
Summary:
1. remove class InternalFilterPolicy in db/dbformat.h
2. Transformation from internal key to user key is done in filter_block.cc
3. This is a preparation for patch D20979
Test Plan:
make all check
valgrind ./db_test
Reviewers: igor, yhchiang, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22509
Summary:
Based on discussions from t4982833. This is just a short-term fix, I plan to revamp manual compaction process as part of t4982812.
Also, I think we should schedule automatic compactions at the very end of manual compactions, not when we're done with one level. I made that change as part of this diff. Let me know if you disagree.
Test Plan: make check for now
Reviewers: sdong, tnovak, yhchiang, ljin
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22401
Summary: No __thread for ios.
Test Plan: compile works for ios now
Reviewers: ljin, dhruba
Reviewed By: dhruba
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22491
Summary:
- New Uint64 comparator
- Modify Reader and Builder to take custom user comparators instead of bytewise comparator
- Modify logic for choosing unused user key in builder
- Modify iterator logic in reader
- test changes
Test Plan:
cuckoo_table_{builder,reader,db}_test
make check all
Reviewers: ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22377
Summary: In DBImpl::Recover method, while loading memtables, also check if memtables are empty. Use this in DBImplReadonly to determine whether to lookup memtable or not.
Test Plan:
db_test
make check all
Reviewers: sdong, yhchiang, ljin, igor
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22281
Summary: also fix HISTORY.md
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22437
Summary:
It was creating BlockBasedTableOptions object in a loop without calling
destroy()
Test Plan: valgrind ./c_test --leak-check=full --show-reachable=yes
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22431
Summary: Add a virtual function in table factory that will print table options
Test Plan: make release
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22149
Summary:
I will move compression related options in a separate diff since this
diff is already pretty lengthy.
I guess I will also need to change JNI accordingly :(
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21915
Summary:
Currently, PlainTable must use mmap_reads. When PlainTable is used but
allow_mmap_reads is not set, rocksdb will fail in flush.
This diff improve Options sanitization and add MmapReadRequired() to
TableFactory.
Test Plan:
export ROCKSDB_TESTS=PlainTableOptionsSanitizeTest
make db_test -j32
./db_test
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: you, leveldb
Differential Revision: https://reviews.facebook.net/D21939
Summary: A previous change triggered a change by mistake: DestroyDB() will keep info logs under DB directory. Revert the unintended change.
Test Plan: Add a unit test case to verify it.
Reviewers: ljin, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22209
Summary:
Adding num_column_families flag. Adding support for column families in DoWrite and ReadRandom methods.
[Igor, please let me know if this approach sounds good. I shall add it to other methods too.]
Test Plan: Ran fillseq on 1M keys and 10 Column families and ran readrandom.
Reviewers: sdong, yhchiang, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21387
Summary:
Add WriteBatchWithIndex so that a user can query data out of a WriteBatch, to support MongoDB's read-its-own-write.
WriteBatchWithIndex uses a skiplist to store the binary index. The index stores the offset of the entry in the write batch. When searching for a key, the key for the entry is read by read the entry from the write batch from the offset.
Define a new iterator class for querying data out of WriteBatchWithIndex. A user can create an iterator of the write batch for one column family, seek to a key and keep calling Next() to see next entries.
I will add more unit tests if people are OK about this API.
Test Plan:
make all check
Add unit tests.
Reviewers: yhchiang, igor, MarkCallaghan, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb, xjin
Differential Revision: https://reviews.facebook.net/D21381
Summary: Adding flags to use cuckoo table SST in db_bench.cc
Test Plan: Ran benchmark with fillseq and readrandom
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21729
Summary:
Avoid retrying to read property block from a table when it does not exist
in updating stats for compensating deletion entries.
In addition, ReadTableProperties() now returns Status::NotFound instead
of Status::Corruption when table properties does not exist in the file.
Test Plan:
make db_test -j32
export ROCKSDB_TESTS=CompactionDeleteionTrigger
./db_test
Reviewers: ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21867
Summary:
1. Support purging info logs from a separate paths from DB path. Refactor the codes of generating info log prefixes so that it can be called when generating new files and scanning log directory.
2. Fix the bug of not scanning multiple DB paths (should only impact multiple DB paths)
Test Plan:
Add unit test for generating and parsing info log files
Add end-to-end test in db_test
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb, igor, dhruba
Differential Revision: https://reviews.facebook.net/D21801
Summary: This is a linux-specific system call.
Test Plan: ran db_bench
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: haobo, leveldb
Differential Revision: https://reviews.facebook.net/D21183
Summary: as title
Test Plan: make release
Reviewers: sdong, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21717
Summary: 1. write db MANIFEST, CURRENT, IDENTITY, sst files, log files to log before open
Test Plan: run db and check LOG file
Reviewers: ljin, yhchiang, igor, dhruba, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21459
Summary: as title
Test Plan:
make all check
ran db_bench and saw seek stats at the end
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21651
Summary: as title
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21201
Previously, the prefix extractor was being supplied with the RocksDB
key instead of a parsed user key. This makes correct interpretation
by calling application fragile or impossible.
Summary: Small change: replace mutex_.Lock/mutex_.Unlock() with scope guard
Test Plan: make all check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21609
Summary:
Currently DBImpl::Flush() triggers flushes in all column families.
Instead we need to trigger just the column family specified.
Test Plan: make all check
Reviewers: igor, ljin, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20841
Summary:
Contains the following changes:
- Implementation of cuckoo_table_factory
- Adding cuckoo table into AdaptiveTableFactory
- Adding cuckoo_table_db_test, similar to lines of plain_table_db_test
- Minor fixes to Reader: When a key is found in the table, return the key found instead of the search key.
- Minor fixes to Builder: Add table properties that are required by Version::UpdateTemporaryStats() during Get operation. Don't define curr_node as a reference variable as the memory locations may get reassigned during tree.push_back operation, leading to invalid memory access.
Test Plan:
cuckoo_table_reader_test --enable_perf
cuckoo_table_builder_test
cuckoo_table_db_test
make check all
make valgrind_check
make asan_check
Reviewers: sdong, igor, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21219
Changes to support unity build:
Script for building the unity.cc file via Makefile
Unity executable Makefile target for testing builds
Source code changes to fix compilation of unity build
* Script for building the unity.cc file via Makefile
* Unity executable Makefile target for testing builds
* Source code changes to fix compilation of unity build
Summary: In FindObsoleteFiles(), we don't scan db_log_dir. Add it.
Test Plan: make all check
Reviewers: ljin, igor, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb, yhchiang
Differential Revision: https://reviews.facebook.net/D21429
Summary: If there is an outstanding compaction scheduled but at the time a manual compaction is triggered, the manual compaction will preempt. In the end of the manual compaction, we should try to schedule compactions to make sure those preempted ones are not skipped.
Test Plan: make all check
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba, igor
Differential Revision: https://reviews.facebook.net/D21321
Summary: Fix old issue with DBTest.Randomized with BlockBasedTableWithWholeKeyHashIndex + added printing in DBTest.Randomized.
Test Plan: make all check
Reviewers: zagfox, igor, ljin, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21003
Summary:
Add a DB Property "rocksdb.estimate-table-readers-mem" to return estimated memory usage by all loaded table readers, other than allocated from block cache.
Refactor the property codes to allow getting property from a version, with DB mutex not acquired.
Test Plan: Add several checks of this new property in existing codes for various cases.
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D20733
Summary:
1. logging when create and delete manifest file
2. fix formating in table/format.cc
Test Plan:
make all check
run db_bench, track the LOG file.
Reviewers: ljin, yhchiang, igor, yufei.zhu, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21009
Summary: I was bit by this when developing SpatialDB. In case all files are at level 0, CompactRange() will output the compacted files to level 0. This is not ideal, since read amp. is much better at level 1 and higher.
Test Plan: Compacted data in SpatialDB, read manifest using ldb, verified that files are now at level 1 instead of 0.
Reviewers: sdong, ljin, yhchiang, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20901
Summary:
Fixed the following compilation error detected in mac:
db/db_test.cc:2524:3: note: in instantiation of function template
specialization 'rocksdb::test::Tester::IsEq<unsigned long long, int>' requested here
ASSERT_EQ(int_num, 0);
^
Test Plan:
make
Summary:
Previously, builder.cc has a check for merge operator which prevents
RocksDB from crash when reopening a DB w/o properly specifying the merge
operator. However, currently we observed a memory leak on failing in
RocksDB recovery. This diff removes such check and let it crash instead of
causing memory leak for now before we have identified the real cause of
the memory leak.
Test Plan: make all check
Reviewers: sdong
Subscribers: ljin, igor
Differential Revision: https://reviews.facebook.net/D20913
Summary:
DBImplReadOnly::CompactRange wasn't override DBImpl::CompactRange;
this can cause problem when using StackableDB inheritors like
DbWithTtl.
P. S. Thanks C++11 for override :)
Test Plan: make all check
Reviewers: igor, sdong
Reviewed By: sdong
Subscribers: yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D20829
Summary:
Fixed the crash when merge_operator is not properly set after reopen
and added two test cases for this.
Test Plan:
make merge_test
./merge_test
Reviewers: igor, ljin, sdong
Reviewed By: sdong
Subscribers: benj, mvikjord, leveldb
Differential Revision: https://reviews.facebook.net/D20793
Summary: const string& dbname parameter is not used
Test Plan: make all
Reviewers: sdong, igor
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20703
Summary:
We now reads table properties in VersionSet::LogAndApply(), which requires options.db_paths to be set. But since ldb_cmd directly creates VersionSet without initialization db_paths, causing a seg fault. This patch fix it by initializing db_paths.
log_and_apply_bench still shows segfault, because table cache is nullptr in VersionSet created.
Test Plan: Run ldb dump_manifest which used to fail.
Reviewers: yhchiang, ljin, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20751
Summary: We have quite some properties that are integers and we are adding more. Add a function to directly return them as an integer, instead of a string
Test Plan: Add several unit test checks
Reviewers: yhchiang, igor, dhruba, haobo, ljin
Reviewed By: ljin
Subscribers: yoshinorim, leveldb
Differential Revision: https://reviews.facebook.net/D20637
Summary: Add a DB property of estimated number of live keys, by adding number of entries of all mem tables and all files, subtracted by all deletions in all files.
Test Plan: Add the case in unit tests
Reviewers: hobbymanyp, ljin
Reviewed By: ljin
Subscribers: MarkCallaghan, yoshinorim, leveldb, igor, dhruba
Differential Revision: https://reviews.facebook.net/D20631
Summary:
It has one-to-one relationship with CFD. Take a pointer to CFD on
constructor to avoid passing cfd through member functions.
Test Plan: make
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20565
Summary: So that we can avoid calling NowSecs() in MakeRoomForWrite twice
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20529
Summary:
Make StatisticsImpl being able to forward stats to provided statistics
implementation. The main purpose is to allow us to collect internal
stats in the future even when user supplies custom statistics
implementation. It avoids intrumenting 2 sets of stats collection code.
One immediate use case is tuning advisor, which needs to collect some
internal stats, users may not be interested.
Test Plan:
ran db_bench and see stats show up at the end of run
Will run make all check since some tests rely on statistics
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20145
Summary:
Make StatisticsImpl being able to forward stats to provided statistics
implementation. The main purpose is to allow us to collect internal
stats in the future even when user supplies custom statistics
implementation. It avoids intrumenting 2 sets of stats collection code.
One immediate use case is tuning advisor, which needs to collect some
internal stats, users may not be interested.
Test Plan:
ran db_bench and see stats show up at the end of run
Will run make all check since some tests rely on statistics
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20145
Summary:
User gets undefinied error since the definition is not exposed.
Also re-enable the db test with only upper bound check
Test Plan: db_test, rate_limit_test
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20403
Summary:
Fixed compaction-related errors where number of input levels are hard-coded.
It's a bug found in compaction branch.
This diff will be pushed into master.
Test Plan:
export ROCKSDB_TESTS=Compact
make db_test -j32
./db_test
also passed the tests in compaction branch
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20577
Summary:
Modify a functioin TrimAppend in dbformat.h: IterKey. Write a test for it in dbformat_test
Use IterKey in block::Iter to replace std::string to reduce malloc.
Evaluate it using perf record.
malloc: 4.26% -> 2.91%
free: 3.61% -> 3.08%
Test Plan:
make all check
./valgrind db_test dbformat_test
Reviewers: ljin, haobo, yhchiang, dhruba, igor, sdong
Reviewed By: sdong
Differential Revision: https://reviews.facebook.net/D20433
Summary:
Fixed a bug in Compaction.cc where input_levels_ was not properly resized.
Without this fix, there would be invalid access in input_levels_ when more
than two levels are involved in one compaction run.
This fix will go to master instead of compaction branch.
Test Plan: tested in compaction branch.
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20481
Summary:
All public headers need to be under `include/rocksdb` directory. Otherwise, clients include our header files like this:
#include <rocksdb/db.h>
#include <utilities/backupable_db.h> // still our public header!
Also, internally, we include:
#include "utilities/backupable/backupable_db.h" // internal header
#include "utilities/backupable_db.h" // public header
which is confusing.
This way, when we install rocksdb as a system library, we can just copy `include/rocksdb` directory to system's header files. We can't really copy `utilities` directory to system's header files.
Test Plan: compiles
Reviewers: dhruba, ljin, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20409
Summary: Add a parameter path_id to DB::CompactRange(), to indicate where the output file should be placed to.
Test Plan: add a unit test
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, igor, dhruba, MarkCallaghan, leveldb
Differential Revision: https://reviews.facebook.net/D20085
Summary:
Add block_restart_interval in db_bench, default value 16
Test Plan:
make
Reviewers: sdong
Reviewed By: sdong
Differential Revision: https://reviews.facebook.net/D20331
Summary:
Adding option to save PlainTable index and bloom filter in SST file.
If there is no bloom block and/or index block, PlainTableReader builds
new ones. Otherwise PlainTableReader just use these blocks.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19527
Summary:
Since we have a lot of options for PlainTable, add a struct PlainTableOptions
to manage them
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20175
Summary:
Having if-then branch for different compaction strategies is considered
hacky and make CompactionPicker less pluggable. This diff removes two
of such if-then branches in version_set.cc by adding MaxInputLevel() to
CompactionPicker.
// Given the current number of levels, returns the lowest allowed level
// for compaction input.
virtual int MaxInputLevel(int current_num_levels) const;
Test Plan:
make db_test
export ROCKSDB_TESTS=Compaction
./db_test
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19971
Summary: Adding guards to files_ attribute of FilePicker class. This attribute is used only in DEBUG mode. This fixes build of static_lib in mac.
Test Plan:
make static_lib in mac
make check all in devserver
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Differential Revision: https://reviews.facebook.net/D20163
Summary:
Allow class Compaction to handle input files from multiple levels.
This diff is a subset of https://reviews.facebook.net/D19263 where
only db/compaction.cc and db/compaction.h are changed.
Test Plan:
make db_test
export ROCKSDB_TESTS=Compaction
./db_test
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19923
Summary:
add a flag called use_hash_search in db_bench
Test Plan:
make all check
./db_bench --use_hash_search=1
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D20067
Summary:
One line change to fix a bug in the LOG when flush memtable
Test Plan:
NONE
Reviewers: sdong
Reviewed By: sdong
Differential Revision: https://reviews.facebook.net/D20049
Summary: Refactoring Version::Get() method to move file picker logic to a separate class.
Test Plan: make check all
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19713
Summary: Implement Prev() with merge operator for DBIterator. Request from mongoDB. Task 4673663.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19743
Summary:
This patch adds a target size parameter in options.db_paths and universal compaction will base it to determine which DB path to place a new file.
Level-style stays the same.
Test Plan: Add new unit tests
Reviewers: ljin, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D19869
Summary: Browsing through the code, looks like StatsLogger is not used at all!
Test Plan: compiles
Reviewers: ljin, sdong, yhchiang, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19827
Summary: We should use PRIu64 instead of "%lu" for portability
Test Plan: compiles now
Reviewers: ljin, dhruba
Reviewed By: dhruba
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19809
Summary:
Use FileLevel in LevelFileNumIterator, thus use new version of findFile.
Old version of findFile function is deleted.
Write a function in version_set.cc to generate FileLevel from files_.
Add GenerateFileLevelTest in version_set_test.cc
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D19659
Summary:
If `NeedToSeekImmutable()` returns false, `SeekInternal()` won't reset the
contents of `immutable_min_heap_`. However, since it calls `UpdateCurrent()`
unconditionally, if `current_` is one of immutable iterators (previously popped
from `immutable_min_heap_`), `UpdateCurrent()` will overwrite it. As a result,
if old `current_` in fact pointed to the smallest entry, forward iterator will
skip some records.
Fix implemented in this diff pushes `current_` back to `immutable_min_heap_`
before calling `UpdateCurrent()`.
Test Plan:
New unit test (courtesy of @lovro):
$ ROCKSDB_TESTS=TailingIteratorSeekToSame ./db_test
Reviewers: igor, dhruba, haobo, ljin
Reviewed By: ljin
Subscribers: lovro, leveldb
Differential Revision: https://reviews.facebook.net/D19653
Summary:
Forward iterator only checked `status_` and `mutable_iter_->status()`, which is
not sufficient. For example, when reading exclusively from cache
(kBlockCacheTier), `mutable_iter_->status()` may return kOk (e.g. there's
nothing in the memtable), but one of immutable iterators could be in
kIncomplete. In this case, `ForwardIterator::status()` ought to return that
status instead of kOk.
This diff changes `status()` to also check `imm_iters_`, `l0_iters_`, and
`level_iters_`.
Test Plan:
ROCKSDB_TESTS=TailingIteratorIncomplete ./db_test
Reviewers: ljin, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19581
Summary: Add a function to return the perf level. It is to allow a wrapper of DB to increase the perf level and restore the original perf level after finishing the function call.
Test Plan: Add a verification in db_test
Reviewers: yhchiang, igor, ljin
Reviewed By: ljin
Subscribers: xjin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19551
Summary:
Seems like NewTotalOrderPlainTableFactory is useless and is semantically incorrect.
Total order mode indicator is prefix_extractor == nullptr,
but NewTotalOrderPlainTableFactory doesn't set it to be nullptr. That's why some tests
in plain_table_db_tests is incorrect.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19587
Summary:
This is a rough sketch of our new document API. Would like to get some thoughts and comments about the high-level architecture and API.
I didn't optimize for performance at all. Leaving some low-hanging fruit so that we can be happy when we fix them! :)
Currently, bunch of features are not supported at all. Indexes can be only specified when creating database. There is no query planner whatsoever. This will all be added in due time.
Test Plan: Added a simple unit test
Reviewers: haobo, yhchiang, dhruba, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18747
Summary:
fix a bug in improve_file_key_search, change the parameter for FileDescriptor
Test Plan:
make all check
Reviewers: sdong
Reviewed By: sdong
Differential Revision: https://reviews.facebook.net/D19611
Summary:
The test is not stable because it relies on disk and only runs for a
short period of time. So misisng a compaction/flush would greatly affect
the rate. I am disabling it for now. What do you guys think?
Test Plan: make
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19599
Summary:
Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena
Thus increase the file meta data locality, speed up "Get" and "FindFile"
benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing"
benchmark command:
./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920
Read Random:
From 1.8363 ms/op, improve to 1.7587 ms/op.
Read while writing:
From 2.985 ms/op, improve to 2.924 ms/op.
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, igor
Differential Revision: https://reviews.facebook.net/D19419
Summary:
This patch include two fixes:
1. newly created Version will now takes the aggregated stats for average-value-size from the latest Version.
2. compensated size of a file is now computed only for newly created / loaded file, this addresses the issue where files are already sorted by their compensated file size but might sometimes observe some out-of-order due to later update on compensated file size.
Test Plan:
export ROCKSDB_TESTS=CompactionDele
./db_test
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19557
Summary: stall count is wrong
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19539
Summary:
Randomize keys so that compaction actually happens.
Change the config so that compaction happens more aggressively.
The test takes longer time, but the results are more stable shown by
iostat
Test Plan: ran it
Reviewers: igor, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19533
Summary: as title
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19515
Summary:
Add option and plugin rate limiter for PosixWritableFile. The rate
limiter only applies to flush and compaction. WAL and MANIFEST are
excluded from this enforcement.
Test Plan: db_test
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19425
Summary:
Use search hint to reduce FindFile range thus avoid comparison
For a small DB with 50M keys, perf_context counter shows it reduces
comparison from 2B to 1.3B for a 15-minute run. No perf change was
observed for 1 seek thread, but quite good improvement was seen for 32
seek threads, when CPU was busy.
will post detail results when ready
Test Plan: db_bench and db_test
Reviewers: haobo, sdong, dhruba, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18879
Summary:
Changes:
- Adding numa_aware flag to db_bench.cc
- Using numa.h library to bind memory and cpu of threads to a fixed NUMA node
Result: There seems to be no significant change in the micros/op time with numa_aware enabled. I also tried this with other implementations, including a combination of pthread_setaffinity_np, sched_setaffinity and set_mempolicy methods. It'd be great if someone could point out where I'm going wrong and if we can achieve a better micors/op.
Test Plan:
Ran db_bench tests using following command:
./db_bench --db=/mnt/tmp --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=/mnt/tmp --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --duration=300 --benchmarks=readwhilewriting --use_existing_db=1 --num=157286400 --threads=24 --writes_per_second=10240 --numa_aware=[False/True]
The tests were run in private devserver with 24 cores and the db was prepopulated using filluniquerandom test. The tests resulted in 0.145 us/op with numa_aware=False and 0.161 us/op with numa_aware=True.
Reviewers: sdong, yhchiang, ljin, igor
Reviewed By: ljin, igor
Subscribers: igor, leveldb
Differential Revision: https://reviews.facebook.net/D19353
Summary:
SimpleWriteTimeoutTest has two parts: 1) insert two large key/values
to make memtable full and expect both of them are successful; 2) insert
another key / value and expect it to be timed-out. Previously we also
set a timeout in the first step, but this might sometimes cause
false alarm.
This diff makes the first two writes run without timeout setting.
Test Plan:
export ROCKSDB_TESTS=Time
make db_test
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19461
Summary: Removed a variable that is only used in assertion check.
Test Plan: make release
Reviewers: ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19455
Summary:
This diff allows the I/O stats about Flush and Compaction to be reported
in a more accurate way. Instead of measuring the size of a file, it
measure I/O cost in per read / write basis.
Test Plan: make all check
Reviewers: sdong, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19383
Summary:
This diff adds timeout_hint_us to WriteOptions. If it's non-zero, then
1) writes associated with this options MAY be aborted when it has been
waiting for longer than the specified time. If an abortion happens,
associated writes will return Status::TimeOut.
2) the stall time of the associated write caused by flush or compaction
will be limited by timeout_hint_us.
The default value of timeout_hint_us is 0 (i.e., OFF.)
The statistics of timeout writes will be recorded in WRITE_TIMEDOUT.
Test Plan:
export ROCKSDB_TESTS=WriteTimeoutAndDelayTest
make db_test
./db_test
Reviewers: igor, ljin, haobo, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18837
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary:
Before this diff, we're deciding enable_compression in CompactionPicker and then we're deciding final compression type in DBImpl. This is kind of confusing.
After the diff, the final compression type will be decided in CompactionPicker.
The reason for this is that I want CompactFiles() to specify output compression type, so that people can mix and match compression styles in their compaction algorithms. This diff makes it much easier to do that.
Test Plan: make check
Reviewers: dhruba, haobo, sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19137
Commit 6634844dba by sdong
Two small fixes in db_test
Summary:
Two fixes:
(1) WalDir to pick a directory under TmpDir to allow two tests running in parallel without impacting each other
(2) kBlockBasedTableWithWholeKeyHashIndex is disabled by mistake (I assume). Enable it.
Test Plan: ./db_test
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: nkg-, igor, dhruba, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D19389
Summary:
In this patch, we enhance HashLinkList memtable to reduce performance outliers when a bucket contains too many entries. We switch to skip list for this case to enable binary search.
Add threshold_use_skiplist parameter to determine when a bucket needs to switch to skip list.
The new data structure is documented in comments in the codes.
Test Plan:
make all check
set threshold_use_skiplist in several tests
Reviewers: yhchiang, haobo, ljin
Reviewed By: yhchiang, ljin
Subscribers: nkg-, xjin, dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19299
Summary:
Two fixes:
(1) WalDir to pick a directory under TmpDir to allow two tests running in parallel without impacting each other
(2) kBlockBasedTableWithWholeKeyHashIndex is disabled by mistake (I assume). Enable it.
Test Plan: ./db_test
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: nkg-, igor, dhruba, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D19389
Summary: files_by_size_ is sorted by time in case of universal compaction. However, Version::files_ is also sorted by time. So no need for files_by_size_
Test Plan:
1) make check with the change
2) make check with `assert(last_index == c->input_version_->files_[level].size() - 1);` in compaction picker
Reviewers: dhruba, haobo, yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19125
Summary:
Bloomfilter and hashskiplist's buckets_ allocated by memtable's arena
DynamicBloom: pass arena via constructor, allocate space in SetTotalBits
HashSkipListRep: allocate space of buckets_ using arena.
do not delete it in deconstructor because arena would take care of it.
Several test files are changed.
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D19335
Summary: Code cleaning up, since we are already using __STDC_FORMAT_MACROS in printing uint64_t, change other places. Only logging is changed.
Test Plan: make all check
Reviewers: ljin
Reviewed By: ljin
Subscribers: dhruba, yhchiang, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D19113
Summary:
Task 4580155. Some conditions in DBImpl::MakeRoomForWrite can be cached in
ColumnFamilyData, because theirs value can be changed only during compaction,
adding new memtable and/or add recalculation of compaction score.
These conditions are:
cfd->imm()->size() == cfd->options()->max_write_buffer_number - 1
cfd->current()->NumLevelFiles(0) >= cfd->options()->level0_stop_writes_trigger
cfd->options()->soft_rate_limit > 0.0 &&
(score = cfd->current()->MaxCompactionScore()) > cfd->options()->soft_rate_limit
cfd->options()->hard_rate_limit > 1.0 &&
(score = cfd->current()->MaxCompactionScore()) > cfd->options()->hard_rate_limit
P.S.
As it's my first diff, Siying suggested to add everybody as a reviewers
for this diff. Sorry, if I forgot someone or add someone by mistake.
Test Plan: make all check
Reviewers: haobo, xjin, dhruba, yhchiang, zagfox, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19311
Summary: It seems to me that when ever function MemTableRep::GetIterator(const Slice& slice) is used, we can use MemTableRep::GetDynamicPrefixIterator() instead. Just delete it to simplify the codes.
Test Plan: make all check
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, dhruba, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D19281
Summary:
Move stats related member variables of FileMetaData to the bottom to
improve cache locality of normal DB operations.
Test Plan: make
Reviewers: haobo, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19287
Summary:
This diff allows compaction to reclaim storage more effectively.
In the current design, compactions are mainly triggered based on
the file sizes. However, since deletion entries does not have
value, files which have many deletion entries are less likely
to be compacted. As a result, it may took a while to make
deletion entries to be compacted.
This diff address issue by compensating the size of deletion
entries during compaction process: the size of each deletion
entry in the compaction process is augmented by 2x average
value size. The diff applies to both leveled and universal
compacitons.
Test Plan:
develop CompactionDeletionTrigger
make db_test
./db_test
Reviewers: haobo, igor, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19029
Summary:
RandomGenerator::Generate() currently has an assertion len < data_.size().
However, it is actually fine to have len == data_.size().
This diff change the assertion to len <= data_.size().
Test Plan:
make db_bench
./db_bench
Reviewers: haobo, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19269
Summary: as title
Test Plan: make release
Reviewers: haobo, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19227
Summary: as requested by mark
Test Plan: make release
Reviewers: sdong, haobo
Reviewed By: haobo
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19221
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary:
We decided that one of the long term goals is to unify level and universal compaction.
As a small first step, I'm unifying level 0 sorting methods.
Previously, we used to sort level 0 files in level compaction by file number and in universal compaction by sequence number.
But it turns out that in level compaction, sorting by file number is exactly the same as sorting by sequence number.
Test Plan:
Ran make check with bunch of asserts to verify the sorting order is exactly the same.
Also, make check with this patch
Reviewers: haobo, yhchiang, ljin, dhruba, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19131
Summary: Currently, RocksDB returns error if a db written with prefix hash index, is later opened without providing a prefix extractor. This is uncessarily harsh. Without a prefix extractor, we could always fallback to the normal binary index.
Test Plan: unit test, also manually veried LOG that fallback did occur.
Reviewers: sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19191
Summary:
Currently, when something badly happen in the DB::Write() while the write-queue
contains more than one element, the current design seems to forget to clean up
the queue as well as wake-up all the writers, this potentially makes rocksdb
hang on writes.
Test Plan: make all check
Reviewers: sdong, ljin, igor, haobo
Reviewed By: haobo
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19167
Summary: asan_crash_test is failing on segfault
Test Plan: running asan_crash_test
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19149
Summary:
Add a encoding feature of PlainTable to encode PlainTable's keys to save some bytes for the same prefixes.
The data format is documented in table/plain_table_factory.h
Test Plan: Add unit test coverage in plain_table_db_test
Reviewers: yhchiang, igor, dhruba, ljin, haobo
Reviewed By: haobo
Subscribers: nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D18735
Summary:
This is minor, but if we put the writing talbe factory as the third parameter, when we add a new table format, we'll have a situation:
1) block based factory
2) plain table factory
3) output factory
4) new format factory
I think it makes more sense to have output as the first parameter.
Also, fixed a NewAdaptiveTableFactory() call in unit test
Test Plan: unit test
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19119
Summary: Add two parameters of hash linked list to log distribution of number of entries across all buckets, and a sample row when there are too many entries in one single bucket.
Test Plan: Turn it on in plain_table_db_test and see the logs.
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: leveldb, nkg-, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D19095
Summary: The new table factory is used if users want to convert a DB from one table format to the other. A user can use this table to open a DB written using one table format and write new files to another table format.
Test Plan: add a unit test
Reviewers: haobo, igor
Reviewed By: igor
Subscribers: dhruba, ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19017
Summary: Include max_write_buffer_number >= 2 to SanitizeOptions.
Test Plan: make all check
Reviewers: haobo, sdong, igor, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19077
Summary:
We added multiple fields to FileMetaData recently and are planning to add more.
This refactoring separate the minimum information for accessing the file. This object is copyable (FileMetaData is not copyable since the ref counter). I hope this refactoring can enable further improvements:
(1) use it to design a more efficient data structure to speed up read queries.
(2) in the future, when we add information of storage level, we can easily do the encoding, instead of enlarge this structure, which might expand memory work set for file meta data.
The definition is same as current EncodedFileMetaData used in two level iterator, so now the logic in two level iterator is easier to understand.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D18933
Some platforms, particularly Windows, do not have a single method that can
release both a held reader lock and a held writer lock; instead, a
separate method (ReleaseSRWLockShared or ReleaseSRWLockExclusive) must be
called in each case.
This may also be necessary to back MutexRW with a shared_mutex in C++14;
the current language proposal includes both an unlock() and a
shared_unlock() method.
Summary:
https://reviews.facebook.net/D17205 removed the logic of skipping file key range check when there are less than 3 level 0 files. This patch brings it back.
Other than that, add another small optimization to avoid to check all the levels if most higher levels don't have any file.
Test Plan: make all check
Reviewers: ljin
Reviewed By: ljin
Subscribers: yhchiang, igor, haobo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19035
Summary: as title
Test Plan:
db_bench
the initial result is very promising. I will post results of complete
runs
Reviewers: dhruba, haobo, sdong, igor
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18867
Summary:
Clean PlainTableReader's data structures:
(1) inline bloom_ (in order to do this, change DynamicBloom to allow lazy initialization)
(2) remove some variables only used when initialization from the class
(3) put variables not used in normal read code paths to the end of the class and reference prefix_extractor directly
(4) make Options a reference.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: igor, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18891
Summary: Provide an convenience option to create column families if they are missing from the DB. Task #4460490
Test Plan: added unit test. also, stress test for some time
Reviewers: sdong, haobo, dhruba, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D18951
Summary: We have a perf regression of Write() even with one column family. Make fast path for single column family to avoid the perf regression. See task #4455480
Test Plan: make check
Reviewers: sdong, ljin
Reviewed By: sdong, ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18963
Summary: Now sst_dump fails in block based tables if binary search index is used, as it requires a prefix extractor. Add it.
Test Plan: Run it against such a file to make sure it fixes the problem.
Reviewers: yhchiang, kailiu
Reviewed By: kailiu
Subscribers: ljin, igor, dhruba, haobo, leveldb
Differential Revision: https://reviews.facebook.net/D18927
Summary: In universal compaction, MaxFileSizeForLevel is ULLONG_MAX. We've been preallocation files to UULONG_MAX size all these time :)
Test Plan: make check
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18915
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.
Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: leveldb, dhruba, yhchiang, igor
Differential Revision: https://reviews.facebook.net/D18513
Summary:
At the end of BackgroundCallCompaction(), we call SignalAll(), even though we don't need to. If compaction hasn't done anything and there's another compaction running, there is no need to signal on the condition variable. Doing so creates a tight feedback loop which results in log files like:
wait for memtable flush
compaction nothing to do
wait for memtable flush
compaction nothing to do
This change eliminates that
Test Plan:
make check
Also:
icanadi@dev1440 ~ $ grep "nothing to do" /fast-rocksdb-tmp/rocksdb_test/column_family_test/LOG | wc -l
7435
icanadi@dev1440 ~ $ grep "nothing to do" /fast-rocksdb-tmp/rocksdb_test/column_family_test/LOG | wc -l
372
First version is before the change, second version is after the change.
Reviewers: dhruba, ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18855
Summary:
We've seen some production issues where column family is detected as stale, although there is only one column family in the system. This is a quick fix that:
1) doesn't flush stale column families if there's only one of them
2) Use 4 as a coefficient instead of 2 for determening when a column family is stale. This will make flushing less aggressive, while still keep a nice dynamic flushing of very stale CFs.
Test Plan: make check
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18861
Summary:
Forward iterator puts everything together in a flat structure instead of
a hierarchy of nested iterators. this should simplify the code and
provide better performance. It also enables more optimization since all
information are accessiable in one place.
Init evaluation shows about 6% improvement
Test Plan: db_test and db_bench
Reviewers: dhruba, igor, tnovak, sdong, haobo
Reviewed By: haobo
Subscribers: sdong, leveldb
Differential Revision: https://reviews.facebook.net/D18795
Summary: One more option to allow iterator refreshing when using normal iterator
Test Plan: ran db_bench
Reviewers: haobo, sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18849
Summary:
Introducing new compaction style -- FIFO.
FIFO compaction style has write amplification of 1 (+1 for WAL) and it deletes the oldest files when the total DB size exceeds pre-configured values.
FIFO compaction style is suited for storing high-frequency event logs.
Test Plan: Added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
Subscribers: alberts, leveldb
Differential Revision: https://reviews.facebook.net/D18765
Summary: Key size limit doesn't seem to be applicable anymore. Remove it.
Test Plan: run a couple of tests in db_bench
Reviewers: haobo, igor, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18723
Summary: Cleaned up compaction logging a little bit. Now file sizes are easier to read. Also, removed the trailing space.
Test Plan:
verified that i'm happy with logging output:
files_size[#33(seq=101,sz=98KB,0) #31(seq=81,sz=159KB,0) #26(seq=0,sz=637KB,0)]
Reviewers: sdong, haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18549
Summary:
In order to use arena to a use case that the total allocation size might be small (LogBuffer is already such a case), inline 1KB of data in it, so that it can be mostly in stack or inline in another class.
If always inlining 2KB is a concern, I could make it a template to determine what to inline. However, dependents need to changes. Doesn't go with it for now
Test Plan: make all check.
Reviewers: haobo, igor, yhchiang, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18609
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
Summary:
Fixed a file-not-found issue when a log file is moved to archive
by doing a missing retry.
Test Plan:
make db_test
export ROCKSDB_TEST=TransactionLogIteratorRace
./db_test
Reviewers: sdong, haobo
Reviewed By: sdong
CC: igor, leveldb
Differential Revision: https://reviews.facebook.net/D18669
Summary: as title
Test Plan: Still compile
Reviewers: haobo, igor, yhchiang
Reviewed By: igor
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18603
Summary:
Newer gflags switched from `google` namespace to `gflags` namespace. See: https://github.com/facebook/rocksdb/issues/139 and https://github.com/facebook/rocksdb/issues/102
Unfortunately, they don't define any macro with their namespace, so we need to actually try to compile gflags with two different namespace to figure out which one is the correct one.
Test Plan: works in fbcode environemnt. I'll also try in ubutnu with newer gflags
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18537
Summary: We had a hypothesis in https://reviews.facebook.net/D18507 that empty-string internal keys might have been caused by compaction filter deleting all the entries. I added a unit test for that case. Unforutnately, everything works as expected.
Test Plan: this is a test
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18519
Summary:
This was reported by our customers in task #4295529.
Cause:
* MANIFEST file contains a VersionEdit, which contains file entries whose 'smallest' and 'largest' internal keys are empty. String with zero characters. Root cause of corruption was not investigated. We should report corruption when this happens. However, we currently SIGSEGV.
Here's what happens:
* VersionEdit encodes zero-strings happily and stores them in smallest and largest InternalKeys. InternalKey::Encode() does assert when `rep_.empty()`, but we don't assert in production environemnts. Also, we should never assert as a result of DB corruption.
* As part of our ConsistencyCheck, we call GetLiveFilesMetaData()
* GetLiveFilesMetadata() calls `file->largest.user_key().ToString()`
* user_key() function does: 1. assert(size > 8) (ooops, no assert), 2. returns `Slice(internal_key.data(), internal_key.size() - 8)`
* since `internal_key.size()` is unsigned int, this call translates to `Slice(whatever, 1298471928561892576182756)`. Bazinga.
Fix:
* VersionEdit checks if InternalKey is valid in `VersionEdit::GetInternalKey()`. If it's invalid, returns corruption.
Lessons learned:
* Always keep in mind that even if you `assert()`, production code will continue execution even if assert fails.
* Never `assert` based on DB corruption. Assert only if the code should guarantee that assert can't fail.
Test Plan: dumped offending manifest. Before: assert. Now: corruption
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18507
Summary: One of our users reported current file corruption. The machine was rebooted during the time. This is the only think I can think of which could cause current file corruption. Just add this paranoid check.
Test Plan: make all check
Reviewers: haobo, igor
Reviewed By: haobo
CC: yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18495
Summary:
TLB page allocation errors are now logged to info logs, instead of stderr.
In order to do that, mem table rep's factory functions take a info logger now.
Test Plan: make all check
Reviewers: haobo, igor, yhchiang
Reviewed By: yhchiang
CC: leveldb, yhchiang, dhruba
Differential Revision: https://reviews.facebook.net/D18471
Summary:
db_test includes Benchmark for LogAndApply. This diff removes it from db_test and puts it into a separate log_and_apply bench. I just wanted to play around with our new benchmark framework and figure out how it works.
I would also like to show you how great it is! I believe right set of microbenchmarks can speed up our productivity a lot and help catch early regressions.
Test Plan: no
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18261
Summary:
Added a new option `max_total_wal_size`. Once the total WAL size goes over that, we make an attempt to flush all column families that still have data in the earliest WAL file.
By default, I calculate `max_total_wal_size` dynamically, that should be good-enough for non-advanced customers.
Test Plan: Added a test
Reviewers: dhruba, haobo, sdong, ljin, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18345
Summary: Add an option to allocate a piece of memory from huge page TLB. Add options to trigger it in dynamic bloom, plain table indexes andhash linked list hash table.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: nkg-, dhruba, leveldb, igor, yhchiang
Differential Revision: https://reviews.facebook.net/D18357
Summary:
= Major Changes =
* Add a new mem-table representation, HashCuckooRep, which is based cuckoo hash.
Cuckoo hash uses multiple hash functions. This allows each key to have multiple
possible locations in the mem-table.
- Put: When insert a key, it will try to find whether one of its possible
locations is vacant and store the key. If none of its possible
locations are available, then it will kick out a victim key and
store at that location. The kicked-out victim key will then be
stored at a vacant space of its possible locations or kick-out
another victim. In this diff, the kick-out path (known as
cuckoo-path) is found using BFS, which guarantees to be the shortest.
- Get: Simply tries all possible locations of a key --- this guarantees
worst-case constant time complexity.
- Time complexity: O(1) for Get, and average O(1) for Put if the
fullness of the mem-table is below 80%.
- Default using two hash functions, the number of hash functions used
by the cuckoo-hash may dynamically increase if it fails to find a
short-enough kick-out path.
- Currently, HashCuckooRep does not support iteration and snapshots,
as our current main purpose of this is to optimize point access.
= Minor Changes =
* Add IsSnapshotSupported() to DB to indicate whether the current DB
supports snapshots. If it returns false, then DB::GetSnapshot() will
always return nullptr.
Test Plan:
Run existing tests. Will develop a test specifically for cuckoo hash in
the next diff.
Reviewers: sdong, haobo
Reviewed By: sdong
CC: leveldb, dhruba, igor
Differential Revision: https://reviews.facebook.net/D16155
Summary:
ReadFirstRecord() reads the actual log file from disk on every call. This diff introduces a cache layer on top of ReadFirstRecord(), which should significantly speed up repeated calls to GetUpdatesSince().
I also cleaned up some stuff, but the whole TransactionLogIterator could use some refactoring, especially if we see increased usage.
Test Plan: make check
Reviewers: haobo, sdong, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18387
Summary:
When TransactionLogIterator comes to EOF, it calls UnmarkEOF and continues reading. However, if glibc cached the EOF status of the file, it will get EOF again, even though the new data might have been written to it.
This has been causing errors in Mac OS.
Test Plan: test passes, was failing before
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18381
Summary:
As a follow-up diff for https://reviews.facebook.net/D17805, add
optimization to check PrefixMayMatch on Seek()
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17853
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary: As summary. Add two autovectors that get filled up in MakeRoomForWrite and they get deleted outside of mutex
Test Plan: make check
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18249
Summary:
Now that we have column families involved, we need to add extra context to every log message. They now start with "[column family name] log message"
Also added some logging that I think would be useful, like level summary after every flush (I often needed that when going through the logs).
Test Plan: make check + ran db_bench to confirm I'm happy with log output
Reviewers: dhruba, haobo, ljin, yhchiang, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18303
Summary:
I'm getting lots of e-mails with CompactionInputErrorParanoid failing. Most recent example early morning today was: http://ci-builds.fb.com/job/rocksdb_valgrind/562/consoleFull
I'm putting a stop to these e-mails. I investigated why the test is flakey and it turns out it's because of non-determinsim of compaction scheduling. If there is a compaction after the last flush, CorruptFile will corrupt the compacted file instead of file at level 0 (as it assumes). That makes `Check(9, 9)` fail big time.
I also saw some errors with table file getting outputed to >= 1 levels instead of 0. Also fixed that.
Test Plan: Ran corruption_test 100 times without a failure. Previously it usually failed at 10th occurrence.
Reviewers: dhruba, haobo, ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18285
Summary: IterKey set buffer_size_ to a wrong initial value, causing it to always allocate values from heap instead of stack if the key size is smaller. Fix it.
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D18279
Summary: While debugging Mac-only issue with ThreadLocalPtr, this was very useful. Let's print out stack trace in MAC OS, too.
Test Plan: Verified that somewhat useful stack trace was generated on mac. Will run PrintStack() on linux, too.
Reviewers: ljin, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18189
Summary: In this patch, two new DB properties are defined: rocksdb.num-immutable-mem-table and rocksdb.num-entries-imm-mem-tables, from where number of entries in mem tables can be exposed to users
Test Plan:
Cover the codes in db_test
make all check
Reviewers: haobo, ljin, igor
Reviewed By: igor
CC: nkg-, igor, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18207
Summary: Get rid of the devil. Probably won't impact anything on the perf side.
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D18153
Summary:
This is a temp solution to expose index sizes to users from PlainTableReader before we persistent them to files.
In this patch, the memory consumption of indexes used by PlainTableReader will be reported as two user defined properties, so that users can monitor them.
Test Plan:
Add a unit test.
make all check`
Reviewers: haobo, ljin
Reviewed By: haobo
CC: nkg-, yhchiang, igor, ljin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18195
Summary:
Using ThreadLocalPtr as a flag to determine if a mutex is locked or not enables us to implement AssertNotHeld(). It also makes AssertHeld() actually correct.
I had to remove port::Mutex as a dependency for util/thread_local.h, but that's fine since we can just use std::mutex :)
Test Plan: make check
Reviewers: ljin, dhruba, haobo, sdong, yhchiang
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18171
Summary:
This will enable people using TTL DB to do so with multiple column families. They can also specify different TTLs for each one.
TODO: Implement CreateColumnFamily() in TTL world.
Test Plan: Added a very simple sanity test.
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, alberts
Differential Revision: https://reviews.facebook.net/D17859
Summary: Added benchmark functionality on the lines of folly/Benchmark.h
Test Plan: Added unit tests
Reviewers: igor, haobo, sdong, ljin, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17973
Summary:
The file tree structure in Version is prebuilt and the range of each file is known.
On the Get() code path, we do binary search in FindFile() by comparing
target key with each file's largest key and also check the range for each L0 file.
With some pre-calculated knowledge, each key comparision that has been done can serve
as a hint to narrow down further searches:
(1) If a key falls within a L0 file's range, we can safely skip the next
file if its range does not overlap with the current one.
(2) If a key falls within a file's range in level L0 - Ln-1, we should only
need to binary search in the next level for files that overlap with the current one.
(1) will be able to skip some files depending one the key distribution.
(2) can greatly reduce the range of binary search, especially for bottom
levels, given that one file most likely only overlaps with N files from
the level below (where N is max_bytes_for_level_multiplier). So on level
L, we will only look at ~N files instead of N^L files.
Some inital results: measured with 500M key DB, when write is light (10k/s = 1.2M/s), this
improves QPS ~7% on top of blocked bloom. When write is heavier (80k/s =
9.6M/s), it gives us ~13% improvement.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17205
Summary:
D17961 has two bugs:
(1) two level iterator fails to populate FileMetaData.table_reader, causing performance regression.
(2) table cache handle the !status.ok() case in the wrong place, causing seg fault which shouldn't happen.
Test Plan: make all check
Reviewers: ljin, igor, haobo
Reviewed By: ljin
CC: yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17991
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17739
Summary: Current behavior of creating new DB is, if there is existing log files, we will go ahead and replay them on top of empty DB. This is a behavior that no user would expect. With this patch, we will fail the creation if a user creates a DB with existing log files.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: haobo
CC: nkg-, yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17817
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary:
With multiple column families, especially when manual Flush is executed, we might roll the log file, although the current log file is empty (no data has been written to the log).
After the diff, we won't create new log file if current is empty.
Next, I will write an algorithm that will flush column families that reference old log files (i.e., that weren't flushed in a while)
Test Plan: Added an unit test. Confirmed that unit test failes in master
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17631
Summary: multireadrandom is broken. Fix it
Test Plan: run it and see segfault has gone.
Reviewers: ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17781
Summary:
Fix the following compile error
./db/tailing_iter.h:17:1: error: class 'SuperVersion' was previously declared as a struct [-Werror,-Wmismatched-tags]
class SuperVersion;
^
./db/column_family.h:77:8: note: previous use is here
struct SuperVersion {
^
./db/tailing_iter.h:17:1: note: did you mean struct here?
class SuperVersion;
^~~~~
struct
1 error generated.
Test Plan: make
Reviewers: ljin, igor, haobo, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17799
Summary:
replace the super version acquisision in tailing itrator with thread
local
Test Plan: will post results
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17757
