Summary:
In https://github.com/facebook/rocksdb/pull/6455, we modified the interface of `RandomAccessFileReader::Read` to be able to get rid of memcpy in direct IO mode.
This PR applies the new interface to `BlockFetcher` when reading blocks from SST files in direct IO mode.
Without this PR, in direct IO mode, when fetching and uncompressing compressed blocks, `BlockFetcher` will first copy the raw compressed block into `BlockFetcher::compressed_buf_` or `BlockFetcher::stack_buf_` inside `RandomAccessFileReader::Read` depending on the block size. then during uncompressing, it will copy the uncompressed block into `BlockFetcher::heap_buf_`.
In this PR, we get rid of the first memcpy and directly uncompress the block from `direct_io_buf_` to `heap_buf_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6689
Test Plan: A new unit test `block_fetcher_test` is added.
Reviewed By: anand1976
Differential Revision: D21006729
Pulled By: cheng-chang
fbshipit-source-id: 2370b92c24075692423b81277415feb2aed5d980
Summary:
The methods in convenience.h are used to compare/convert objects to/from strings. There is a mishmash of parameters in use here with more needed in the future. This PR replaces those parameters with a single structure.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6389
Reviewed By: siying
Differential Revision: D21163707
Pulled By: zhichao-cao
fbshipit-source-id: f807b4cc7e2b0af3871536b69546b2604dfa81bd
Summary:
Initial implementation of ReadOptions.deadline for MultiGet. If the request takes longer than the deadline, the keys not yet found will be returned with Status::TimedOut(). This
implementation enforces the deadline in DBImpl, which is fairly high
level. Its best effort and may not check the deadline after every key
lookup, but may do so after a batch of keys.
In subsequent stages, we will extend this to passing a timeout down to the FileSystem.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6710
Test Plan: Add new unit tests
Reviewed By: riversand963
Differential Revision: D21149158
Pulled By: anand1976
fbshipit-source-id: 9f44eecffeb40873f5034ed59a66d21f9f88879e
Summary:
1. Add changes so that max_background_flushes can be set dynamically.
2. Add a testcase DBOptionsTest.SetBackgroundFlushThreads which set the
max_background_flushes dynamically using SetDBOptions.
TestPlan: 1. make -j64 check
2. Using new testcase DBOptionsTest.SetBackgroundFlushThreads
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6701
Reviewed By: ajkr
Differential Revision: D21028010
Pulled By: akankshamahajan15
fbshipit-source-id: 5f949e4a8fd3c32537b637947b7ee09a69cfc7c1
Summary:
Log it in the info log to help in troubleshooting. It is logged as follows -
```
2020/04/10-10:51:39.886662 7ffff7fef340 Options.table_properties_collectors: CompactOnDeletionCollector (Sliding window size = 100 Deletion trigger = 90);
```
Tests:
make check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6686
Reviewed By: ltamasi
Differential Revision: D21002442
Pulled By: anand1976
fbshipit-source-id: 7adf0dbae7f1febcb00ce61fea5097118ede5c6a
Summary:
(Based on Yanqin's idea) Add a new field in readoptions as lower timestamp bound for iterator. When the parameter is not supplied (nullptr), the iterator returns the latest visible version of a record. When it is supplied, the existing timestamp field is the upper bound. Together the two serves as a bounded time window. The iterator returns all versions of a record falling in the window.
SeekRandom perf test (10 minutes) on the same development machine ram drive with the same DB data shows no regression (within marge of error). The test is adapted from https://github.com/facebook/rocksdb/wiki/RocksDB-In-Memory-Workload-Performance-Benchmarks.
base line (commit e860f8840):
seekrandom : 7.836 micros/op 4082449 ops/sec; (0 of 73481999 found)
This PR:
seekrandom : 7.764 micros/op 4120935 ops/sec; (0 of 71303999 found)
db_bench --db=r:\rocksdb.github --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --cache_size=2147483648 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=134217728 --max_bytes_for_level_base=1073741824 --disable_wal=0 --wal_dir=r:\rocksdb.github\WAL_LOG --sync=0 --verify_checksum=1 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --duration=600 --benchmarks=seekrandom --use_existing_db=1 --num=25000000 --threads=32 --allow_concurrent_memtable_write=0
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6544
Reviewed By: ltamasi
Differential Revision: D20844069
Pulled By: riversand963
fbshipit-source-id: d97f2bf38a323c8c6a68db213b2d3c694b1c1f74
Summary:
https://github.com/facebook/rocksdb/pull/6668 added some new test code but it has a risk of memory corruption. Fix it
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6676
Test Plan: Run the test under ASAN and see it passes.
Reviewed By: ajkr
Differential Revision: D20937108
fbshipit-source-id: 22cc96bb02030df0a37a02e67a2cc37ca31ba22d
Summary:
… to CFOptions
https://github.com/facebook/rocksdb/pull/6615 made several compression related options dynamically changeable. They are moved to MutableCFOptions. However, they are not copied back to ColumnFamilyOptions, so the changed values are not written to option files and for some other uses. Fix it by copying them back.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6668
Test Plan: Add a unit test to make sure that when a MutableCFOptions is converted to CFOptions and back to MutableCFOptions, they stay the same. This test would fail without the fix.
Reviewed By: ajkr
Differential Revision: D20923999
fbshipit-source-id: c3bccd6923b00d677764e2269bed6a95ad7ed780
Summary:
This is a predecessor to the Configurable PR. This change moves the OptionTypeInfo maps closer to where they will be used.
When the Configurable changes are adopted, these values will become static and not associated with the OptionsHelper.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6198
Reviewed By: siying
Differential Revision: D20778108
Pulled By: zhichao-cao
fbshipit-source-id: a9f85fc73bc53503656e1958ecc1e764052fd1aa
Summary:
This PR adds support for pipelined & parallel compression optimization for `BlockBasedTableBuilder`. This optimization makes block building, block compression and block appending a pipeline, and uses multiple threads to accelerate block compression. Users can set `CompressionOptions::parallel_threads` greater than 1 to enable compression parallelism.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6262
Reviewed By: ajkr
Differential Revision: D20651306
fbshipit-source-id: 62125590a9c15b6d9071def9dc72589c1696a4cb
Summary:
These three options should be made dynamically changeable. Simply add them to MutableCFOptions and made the change.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6615
Test Plan: Add a unit test to make sure that SetOptions() can change the options.
Reviewed By: riversand963
Differential Revision: D20755951
fbshipit-source-id: 8165f4fd7a7a665cc7fb049698935022a5d2e7ff
Summary:
In the current implementation, sst file checksum is calculated by a shared checksum function object, which may make some checksum function hard to be applied here such as SHA1. In this implementation, each sst file will have its own checksum generator obejct, created by FileChecksumGenFactory. User needs to implement its own FilechecksumGenerator and Factory to plugin the in checksum calculation method.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6600
Test Plan: tested with make asan_check
Reviewed By: riversand963
Differential Revision: D20717670
Pulled By: zhichao-cao
fbshipit-source-id: 2a74c1c280ac11a07a1980185b43b671acaa71c6
Summary:
The current Env/FileSystem API separation has a couple of issues -
1. It requires the user to specify 2 options - ```Options::env``` and ```Options::file_system``` - which means they have to make code changes to benefit from the new APIs. Furthermore, there is a risk of accessing the same APIs in two different ways, through Env in the old way and through FileSystem in the new way. The two may not always match, for example, if env is ```PosixEnv``` and FileSystem is a custom implementation. Any stray RocksDB calls to env will use the ```PosixEnv``` implementation rather than the file_system implementation.
2. There needs to be a simple way for the FileSystem developer to instantiate an Env for backward compatibility purposes.
This PR solves the above issues and simplifies the migration in the following ways -
1. Embed a shared_ptr to the ```FileSystem``` in the ```Env```, and remove ```Options::file_system``` as a configurable option. This way, no code changes will be required in application code to benefit from the new API. The default Env constructor uses a ```LegacyFileSystemWrapper``` as the embedded ```FileSystem```.
1a. - This also makes it more robust by ensuring that even if RocksDB
has some stray calls to Env APIs rather than FileSystem, they will go
through the same object and thus there is no risk of getting out of
sync.
2. Provide a ```NewCompositeEnv()``` API that can be used to construct a
PosixEnv with a custom FileSystem implementation. This eliminates an
indirection to call Env APIs, and relieves the FileSystem developer of
the burden of having to implement wrappers for the Env APIs.
3. Add a couple of missing FileSystem APIs - ```SanitizeEnvOptions()``` and
```NewLogger()```
Tests:
1. New unit tests
2. make check and make asan_check
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6552
Reviewed By: riversand963
Differential Revision: D20592038
Pulled By: anand1976
fbshipit-source-id: c3801ad4153f96d21d5a3ae26c92ba454d1bf1f7
Summary:
There are situations when RocksDB tries to recover, but the db is in an inconsistent state due to SST files referenced in the MANIFEST being missing. In this case, previous RocksDB will just fail the recovery and return a non-ok status.
This PR enables another possibility. During recovery, RocksDB checks possible MANIFEST files, and try to recover to the most recent state without missing table file. `VersionSet::Recover()` applies version edits incrementally and "materializes" a version only when this version does not reference any missing table file. After processing the entire MANIFEST, the version created last will be the latest version.
`DBImpl::Recover()` calls `VersionSet::Recover()`. Afterwards, WAL replay will *not* be performed.
To use this capability, set `options.best_efforts_recovery = true` when opening the db. Best-efforts recovery is currently incompatible with atomic flush.
Test plan (on devserver):
```
$make check
$COMPILE_WITH_ASAN=1 make all && make check
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6334
Reviewed By: anand1976
Differential Revision: D19778960
Pulled By: riversand963
fbshipit-source-id: c27ea80f29bc952e7d3311ecf5ee9c54393b40a8
Summary:
Remove copy of pairs from the for range loop
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6514
Test Plan: make check
Differential Revision: D20389688
Pulled By: cheng-chang
fbshipit-source-id: 1c772091f955be33267514010f3596c61a6f46b5
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433
Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.
Differential Revision: D19977691
fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
Summary:
In the current code base, RocksDB generate the checksum for each block and verify the checksum at usage. Current PR enable SST file checksum. After a SST file is generated by Flush or Compaction, RocksDB generate the SST file checksum and store the checksum value and checksum method name in the vs_info and MANIFEST as part for the FileMetadata.
Added the enable_sst_file_checksum to Options to enable or disable file checksum. Added sst_file_checksum to Options such that user can plugin their own SST file checksum calculate method via overriding the SstFileChecksum class. The checksum information inlcuding uint32_t checksum value and a checksum name (string). A new tool is added to LDB such that user can dump out a list of file checksum information from MANIFEST. If user enables the file checksum but does not provide the sst_file_checksum instance, RocksDB will use the default crc32checksum implemented in table/sst_file_checksum_crc32c.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6216
Test Plan: Added the testing case in table_test and ldb_cmd_test to verify checksum is correct in different level. Pass make asan_check.
Differential Revision: D19171461
Pulled By: zhichao-cao
fbshipit-source-id: b2e53479eefc5bb0437189eaa1941670e5ba8b87
Summary:
clang analysis shows following warning:
options/options_test.cc:1554:24: warning: The left operand of '-' is a garbage value
(file_size - 1) / readahead_size + 1);
~~~~~~~~~ ^
Explicitly initialize file_size and add an assertion to make clang analysis happy.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6398
Test Plan: Run "make analysis" and see the warning goes away.
Differential Revision: D19819662
fbshipit-source-id: 1589ea91c0c8f78242538f01448e4ad0e5fbc219
Summary: Pull Request resolved: https://github.com/facebook/rocksdb/pull/6384
Test Plan: Wait and see the analysis result.
Differential Revision: D19781072
fbshipit-source-id: 75e7cb6ee619ebd289841eaabea03dd075c09d3b
Summary:
Right, when reading from option files, no readahead is used and 8KB buffer is used. It might introduce high latency if the file system provide high latency and doesn't do readahead. Instead, introduce a readahead to the file. When calling inside DB, infer the value from options.log_readahead. Otherwise, a default 512KB readahead size is used.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6372
Test Plan: Add --log_readahead_size in db_bench. Run it with several options and observe read size from option files using strace.
Differential Revision: D19727739
fbshipit-source-id: e6d8053b0a64259abc087f1f388b9cd66fa8a583
Summary:
When paranoid_checks is on, DBImpl::CheckConsistency() iterates over all sst files and calls Env::GetFileSize() for each of them. As far as I could understand, this is pretty arbitrary and doesn't affect correctness - if filesystem doesn't corrupt fsynced files, the file sizes will always match; if it does, it may as well corrupt contents as well as sizes, and rocksdb doesn't check contents on open.
If there are thousands of sst files, getting all their sizes takes a while. If, on top of that, Env is overridden to use some remote storage instead of local filesystem, it can be *really* slow and overload the remote storage service. This PR adds an option to not do GetFileSize(); instead it does GetChildren() for parent directory to check that all the expected sst files are at least present, but doesn't check their sizes.
We can't just disable paranoid_checks instead because paranoid_checks do a few other important things: make the DB read-only on write errors, print error messages on read errors, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6353
Test Plan: ran the added sanity check unit test. Will try it out in a LogDevice test cluster where the GetFileSize() calls are causing a lot of trouble.
Differential Revision: D19656425
Pulled By: al13n321
fbshipit-source-id: c2c421b367633033760d1f56747bad206d1fbf82
Summary:
Add a new option ReadOptions.auto_prefix_mode. When set to true, iterator should return the same result as total order seek, but may choose to do prefix seek internally, based on iterator upper bounds. Also fix two previous bugs when handling prefix extrator changes: (1) reverse iterator should not rely on upper bound to determine prefix. Fix it with skipping prefix check. (2) block-based filter is not handled properly.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6314
Test Plan: (1) add a unit test; (2) add the check to stress test and run see whether it can pass at least one run.
Differential Revision: D19458717
fbshipit-source-id: 51c1bcc5cdd826c2469af201979a39600e779bce
Summary:
The current Env API encompasses both storage/file operations, as well as OS related operations. Most of the APIs return a Status, which does not have enough metadata about an error, such as whether its retry-able or not, scope (i.e fault domain) of the error etc., that may be required in order to properly handle a storage error. The file APIs also do not provide enough control over the IO SLA, such as timeout, prioritization, hinting about placement and redundancy etc.
This PR separates out the file/storage APIs from Env into a new FileSystem class. The APIs are updated to return an IOStatus with metadata about the error, as well as to take an IOOptions structure as input in order to allow more control over the IO.
The user can set both ```options.env``` and ```options.file_system``` to specify that RocksDB should use the former for OS related operations and the latter for storage operations. Internally, a ```CompositeEnvWrapper``` has been introduced that inherits from ```Env``` and redirects individual methods to either an ```Env``` implementation or the ```FileSystem``` as appropriate. When options are sanitized during ```DB::Open```, ```options.env``` is replaced with a newly allocated ```CompositeEnvWrapper``` instance if both env and file_system have been specified. This way, the rest of the RocksDB code can continue to function as before.
This PR also ports PosixEnv to the new API by splitting it into two - PosixEnv and PosixFileSystem. PosixEnv is defined as a sub-class of CompositeEnvWrapper, and threading/time functions are overridden with Posix specific implementations in order to avoid an extra level of indirection.
The ```CompositeEnvWrapper``` translates ```IOStatus``` return code to ```Status```, and sets the severity to ```kSoftError``` if the io_status is retryable. The error handling code in RocksDB can then recover the DB automatically.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5761
Differential Revision: D18868376
Pulled By: anand1976
fbshipit-source-id: 39efe18a162ea746fabac6360ff529baba48486f
Summary:
There's no technological impediment to allowing the Bloom
filter bits/key to be non-integer (fractional/decimal) values, and it
provides finer control over the memory vs. accuracy trade-off. This is
especially handy in using the format_version=5 Bloom filter in place
of the old one, because bits_per_key=9.55 provides the same accuracy as
the old bits_per_key=10.
This change not only requires refining the logic for choosing the best
num_probes for a given bits/key setting, it revealed a flaw in that logic.
As bits/key gets higher, the best num_probes for a cache-local Bloom
filter is closer to bpk / 2 than to bpk * 0.69, the best choice for a
standard Bloom filter. For example, at 16 bits per key, the best
num_probes is 9 (FP rate = 0.0843%) not 11 (FP rate = 0.0884%).
This change fixes and refines that logic (for the format_version=5
Bloom filter only, just in case) based on empirical tests to find
accuracy inflection points between each num_probes.
Although bits_per_key is now specified as a double, the new Bloom
filter converts/rounds this to "millibits / key" for predictable/precise
internal computations. Just in case of unforeseen compatibility
issues, we round to the nearest whole number bits / key for the
legacy Bloom filter, so as not to unlock new behaviors for it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6092
Test Plan: unit tests included
Differential Revision: D18711313
Pulled By: pdillinger
fbshipit-source-id: 1aa73295f152a995328cb846ef9157ae8a05522a
Summary:
default constructor not used or even defined
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6086
Differential Revision: D18695669
Pulled By: pdillinger
fbshipit-source-id: 6b6ac46029f4fb6edf1c11ee6ce1d9f172b2eaf2
Summary:
Further apply formatter to more recent commits.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5830
Test Plan: Run all existing tests.
Differential Revision: D17488031
fbshipit-source-id: 137458fd94d56dd271b8b40c522b03036943a2ab
Summary:
Some recent commits might not have passed through the formatter. I formatted recent 45 commits. The script hangs for more commits so I stopped there.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5827
Test Plan: Run all existing tests.
Differential Revision: D17483727
fbshipit-source-id: af23113ee63015d8a43d89a3bc2c1056189afe8f
Summary:
file_reader_writer.h and .cc contain several files and helper function, and it's hard to navigate. Separate it to multiple files and put them under file/
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5803
Test Plan: Build whole project using make and cmake.
Differential Revision: D17374550
fbshipit-source-id: 10efca907721e7a78ed25bbf74dc5410dea05987
Summary:
The max batch size that we can write to the WAL is controlled by a static manner. So if the leader write is less than 128 KB we will have the batch size as leader write size + 128 KB else the limit will be 1 MB. Both of them are statically defined.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5759
Differential Revision: D17329298
fbshipit-source-id: a3d910629d8d8ca84ea39ad89c2b2d284571ded5
Summary:
Each DB has a globally unique ID. A DB can be physically copied around, or backed-up and restored, and the users should be identify the same DB. This unique ID right now is stored as plain text in file IDENTITY under the DB directory. This approach introduces at least two problems: (1) the file is not checksumed; (2) the source of truth of a DB is the manifest file, which can be copied separately from IDENTITY file, causing the DB ID to be wrong.
The goal of this PR is solve this problem by moving the DB ID to manifest. To begin with we will write to both identity file and manifest. Write to Manifest is controlled via the flag write_dbid_to_manifest in Options and default is false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5725
Test Plan: Added unit tests.
Differential Revision: D16963840
Pulled By: vjnadimpalli
fbshipit-source-id: 8a86a4c8c82c716003c40fd6b9d2d758030d92e9
Summary:
MyRocks currently sets `max_write_buffer_number_to_maintain` in order to maintain enough history for transaction conflict checking. The effectiveness of this approach depends on the size of memtables. When memtables are small, it may not keep enough history; when memtables are large, this may consume too much memory.
We are proposing a new way to configure memtable list history: by limiting the memory usage of immutable memtables. The new option is `max_write_buffer_size_to_maintain` and it will take precedence over the old `max_write_buffer_number_to_maintain` if they are both set to non-zero values. The new option accounts for the total memory usage of flushed immutable memtables and mutable memtable. When the total usage exceeds the limit, RocksDB may start dropping immutable memtables (which is also called trimming history), starting from the oldest one.
The semantics of the old option actually works both as an upper bound and lower bound. History trimming will start if number of immutable memtables exceeds the limit, but it will never go below (limit-1) due to history trimming.
In order the mimic the behavior with the new option, history trimming will stop if dropping the next immutable memtable causes the total memory usage go below the size limit. For example, assuming the size limit is set to 64MB, and there are 3 immutable memtables with sizes of 20, 30, 30. Although the total memory usage is 80MB > 64MB, dropping the oldest memtable will reduce the memory usage to 60MB < 64MB, so in this case no memtable will be dropped.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5022
Differential Revision: D14394062
Pulled By: miasantreble
fbshipit-source-id: 60457a509c6af89d0993f988c9b5c2aa9e45f5c5
Summary:
The ObjectRegistry class replaces the Registrar and NewCustomObjects. Objects are registered with the registry by Type (the class must implement the static const char *Type() method).
This change is necessary for a few reasons:
- By having a class (rather than static template instances), the class can be passed between compilation units, meaning that objects could be registered and shared from a dynamic library with an executable.
- By having a class with instances, different units could have different objects registered. This could be useful if, for example, one Option allowed for a dynamic library and one did not.
When combined with some other PRs (being able to load shared libraries, a Configurable interface to configure objects to/from string), this code will allow objects in external shared libraries to be added to a RocksDB image at run-time, rather than requiring every new extension to be built into the main library and called explicitly by every program.
Test plan (on riversand963's devserver)
```
$COMPILE_WITH_ASAN=1 make -j32 all && sleep 1 && make check
```
All tests pass.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5293
Differential Revision: D16363396
Pulled By: riversand963
fbshipit-source-id: fbe4acb615bfc11103eef40a0b288845791c0180
Summary:
Added log_readahead_size option to control prefetching for Log::Reader.
This is mostly useful for reading a remotely located log, as it can save the number of round-trips when reading it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5592
Differential Revision: D16362989
Pulled By: elipoz
fbshipit-source-id: c5d4d5245a44008cd59879640efff70c091ad3e8
Summary:
Mid-point insertion is a useful feature and is mature now. Make it default. Also changed cache_index_and_filter_blocks_with_high_priority=true as default accordingly, so that we won't evict index and filter blocks easier after the change, to avoid too many surprises to users.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5508
Test Plan: Run all existing tests.
Differential Revision: D16021179
fbshipit-source-id: ce8456e8d43b3bfb48df6c304b5290a9d19817eb
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.
Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.
So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.
Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.
This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289
Differential Revision: D15256423
Pulled By: al13n321
fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
Summary:
This PR continues the work in https://github.com/facebook/rocksdb/pull/4748 and https://github.com/facebook/rocksdb/pull/4535 by adding a new DBOption `persist_stats_to_disk` which instructs RocksDB to persist stats history to RocksDB itself. When statistics is enabled, and both options `stats_persist_period_sec` and `persist_stats_to_disk` are set, RocksDB will periodically write stats to a built-in column family in the following form: key -> (timestamp in microseconds)#(stats name), value -> stats value. The existing API `GetStatsHistory` will detect the current value of `persist_stats_to_disk` and either read from in-memory data structure or from the hidden column family on disk.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5046
Differential Revision: D15863138
Pulled By: miasantreble
fbshipit-source-id: bb82abdb3f2ca581aa42531734ac799f113e931b
Summary:
When using `PRIu64` type of printf specifier, current code base does the following:
```
#ifndef __STDC_FORMAT_MACROS
#define __STDC_FORMAT_MACROS
#endif
#include <inttypes.h>
```
However, this can be simplified to
```
#include <cinttypes>
```
as long as flag `-std=c++11` is used.
This should solve issues like https://github.com/facebook/rocksdb/issues/5159
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5402
Differential Revision: D15701195
Pulled By: miasantreble
fbshipit-source-id: 6dac0a05f52aadb55e9728038599d3d2e4b59d03
Summary:
It's useful to be able to (optionally) associate key-value pairs with user-provided timestamps. This PR is an early effort towards this goal and continues the work of facebook#4942. A suite of new unit tests exist in DBBasicTestWithTimestampWithParam. Support for timestamp requires the user to provide timestamp as a slice in `ReadOptions` and `WriteOptions`. All timestamps of the same database must share the same length, format, etc. The format of the timestamp is the same throughout the same database, and the user is responsible for providing a comparator function (Comparator) to order the <key, timestamp> tuples. Once created, the format and length of the timestamp cannot change (at least for now).
Test plan (on devserver):
```
$COMPILE_WITH_ASAN=1 make -j32 all
$./db_basic_test --gtest_filter=Timestamp/DBBasicTestWithTimestampWithParam.PutAndGet/*
$make check
```
All tests must pass.
We also run the following db_bench tests to verify whether there is regression on Get/Put while timestamp is not enabled.
```
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillseq,readrandom -num=1000000
$TEST_TMPDIR=/dev/shm ./db_bench -benchmarks=fillrandom -num=1000000
```
Repeat for 6 times for both versions.
Results are as follows:
```
| | readrandom | fillrandom |
| master | 16.77 MB/s | 47.05 MB/s |
| PR5079 | 16.44 MB/s | 47.03 MB/s |
```
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5079
Differential Revision: D15132946
Pulled By: riversand963
fbshipit-source-id: 833a0d657eac21182f0f206c910a6438154c742c
Summary:
Currently we validate options in DB::Open. However the validation step is missing when options are dynamically updated in ::SetOptions. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5368
Differential Revision: D15540101
Pulled By: maysamyabandeh
fbshipit-source-id: d27bbffd8f0252d1b50bcf59e0a70a278ed937f4
Summary:
Many logging related source files are under util/. It will be more structured if they are together.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5387
Differential Revision: D15579036
Pulled By: siying
fbshipit-source-id: 3850134ed50b8c0bb40a0c8ae1f184fa4081303f
Summary:
There are too many types of files under util/. Some test related files don't belong to there or just are just loosely related. Mo
ve them to a new directory test_util/, so that util/ is cleaner.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5377
Differential Revision: D15551366
Pulled By: siying
fbshipit-source-id: 0f5c8653832354ef8caa31749c0143815d719e2c
Summary:
When dynamically setting options, we check the option type info and skip options that are marked deprecated. However this check is only done at top level, which results in bugs where SetOptions will corrupt option values and cause unexpected system behavior iff a deprecated second level option is set dynamically.
For exmaple, the following call:
```
dbfull()->SetOptions(
{{"compaction_options_fifo",
"{allow_compaction=true;max_table_files_size=1024;ttl=731;}"}});
```
was from pre 6.0 release when `ttl` was part of `compaction_options_fifo`. Now that it got moved out of `compaction_options_fifo`, this call will incorrectly set `compaction_options_fifo.max_table_files_size` to 731 (as `max_table_files_size` is the first one in `OptionsHelper::fifo_compaction_options_type_info` struct) and cause files to gett evicted much faster than expected.
This PR adds verification to second level options like `compaction_options_fifo.ttl` or `compaction_options_fifo.max_table_files_size` when set dynamically, and filter out those marked as deprecated.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5367
Differential Revision: D15530998
Pulled By: miasantreble
fbshipit-source-id: 818258be5c3abe09cd82d62f3c083572d70fecdd
Summary:
In options_helper.cc various functions take a const unordered_map of
string -> TypeInfo for options handling. These functions pass by-value
the (const) maps, resulting in unnecessary copies.
Change to pass by reference.
This results in a noticable reduction in the amount of time spent
parsing options - in my case a set of unit tests using RocksDB which
call SetOptions() to modify options see a ~25% runtime reduction.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5295
Differential Revision: D15296334
Pulled By: riversand963
fbshipit-source-id: 4d4be3db635264943607911b296dda27fd7ce1a7
Summary:
Performing unordered writes in rocksdb when unordered_write option is set to true. When enabled the writes to memtable are done without joining any write thread. This offers much higher write throughput since the upcoming writes would not have to wait for the slowest memtable write to finish. The tradeoff is that the writes visible to a snapshot might change over time. If the application cannot tolerate that, it should implement its own mechanisms to work around that. Using TransactionDB with WRITE_PREPARED write policy is one way to achieve that. Doing so increases the max throughput by 2.2x without however compromising the snapshot guarantees.
The patch is prepared based on an original by siying
Existing unit tests are extended to include unordered_write option.
Benchmark Results:
```
TEST_TMPDIR=/dev/shm/ ./db_bench_unordered --benchmarks=fillrandom --threads=32 --num=10000000 -max_write_buffer_number=16 --max_background_jobs=64 --batch_size=8 --writes=3000000 -level0_file_num_compaction_trigger=99999 --level0_slowdown_writes_trigger=99999 --level0_stop_writes_trigger=99999 -enable_pipelined_write=false -disable_auto_compactions --unordered_write=1
```
With WAL
- Vanilla RocksDB: 78.6 MB/s
- WRITER_PREPARED with unordered_write: 177.8 MB/s (2.2x)
- unordered_write: 368.9 MB/s (4.7x with relaxed snapshot guarantees)
Without WAL
- Vanilla RocksDB: 111.3 MB/s
- WRITER_PREPARED with unordered_write: 259.3 MB/s MB/s (2.3x)
- unordered_write: 645.6 MB/s (5.8x with relaxed snapshot guarantees)
- WRITER_PREPARED with unordered_write disable concurrency control: 185.3 MB/s MB/s (2.35x)
Limitations:
- The feature is not yet extended to `max_successive_merges` > 0. The feature is also incompatible with `enable_pipelined_write` = true as well as with `allow_concurrent_memtable_write` = false.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5218
Differential Revision: D15219029
Pulled By: maysamyabandeh
fbshipit-source-id: 38f2abc4af8780148c6128acdba2b3227bc81759
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
For simplicity, to avoid the feature is disabled in two cases: i) When more than one sub-compaction are sharing the same snapshot list, ii) when Range Delete is used in which the range delete aggregator has its own copy of snapshot list.
This fixes the reverted https://github.com/facebook/rocksdb/pull/5099 issue with range deletes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5278
Differential Revision: D15203291
Pulled By: maysamyabandeh
fbshipit-source-id: fa645611e606aa222c7ce53176dc5bb6f259c258
Summary:
Right now `OptimizeLevelStyleCompaction` may set compression type to Snappy even when Snappy is not supported, this may cause errors like "no snappy compression support"
Fixes https://github.com/facebook/rocksdb/issues/4283
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4325
Differential Revision: D15125542
Pulled By: miasantreble
fbshipit-source-id: 70890b73ababe16752721555dbd290633c2aafac
Summary:
Our daily stress tests are failing after this feature. Reverting temporarily until we figure the reason for test failures.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5269
Differential Revision: D15151285
Pulled By: maysamyabandeh
fbshipit-source-id: e4002b99690a97df30d4b4b58bf0f61e9591bc6e
Summary:
Part of compaction cpu goes to processing snapshot list, the larger the list the bigger the overhead. Although the lifetime of most of the snapshots is much shorter than the lifetime of compactions, the compaction conservatively operates on the list of snapshots that it initially obtained. This patch allows the snapshot list to be updated via a callback if the compaction is taking long. This should let the compaction to continue more efficiently with much smaller snapshot list.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5099
Differential Revision: D15086710
Pulled By: maysamyabandeh
fbshipit-source-id: 7649f56c3b6b2fb334962048150142a3bf9c1a12
Summary:
- By providing the "env" field in any text-based options (i.e., string, map, or file), we can use `NewCustomObject` to deserialize the text value into an actual `Env` object.
- Currently factory functions for `Env` registered with object registry should only return pointer to static `Env` objects. That's because `DBOptions::env` is a raw pointer so we cannot easily delegate cleanup.
- Note I did not add `env` to `db_option_type_info`. It wasn't needed for (de)serialization, and I believe we don't want to do verification on `env`, even by checking name. That's because the user should be able to copy their DB from Linux to Windows, change envs, and not see an option verification error.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5237
Differential Revision: D15056360
Pulled By: siying
fbshipit-source-id: 4b5f0b83297a5058f8949ec955dbf27d98d73d7e
Summary:
The existing implementation does not guarantee bytes reach disk every `bytes_per_sync` when writing SST files, or every `wal_bytes_per_sync` when writing WALs. This can cause confusing behavior for users who enable this feature to avoid large syncs during flush and compaction, but then end up hitting them anyways.
My understanding of the existing behavior is we used `sync_file_range` with `SYNC_FILE_RANGE_WRITE` to submit ranges for async writeback, such that we could continue processing the next range of bytes while that I/O is happening. I believe we can preserve that benefit while also limiting how far the processing can get ahead of the I/O, which prevents huge syncs from happening when the file finishes.
Consider this `sync_file_range` usage: `sync_file_range(fd_, 0, static_cast<off_t>(offset + nbytes), SYNC_FILE_RANGE_WAIT_BEFORE | SYNC_FILE_RANGE_WRITE)`. Expanding the range to start at 0 and adding the `SYNC_FILE_RANGE_WAIT_BEFORE` flag causes any pending writeback (like from a previous call to `sync_file_range`) to finish before it proceeds to submit the latest `nbytes` for writeback. The latest `nbytes` are still written back asynchronously, unless processing exceeds I/O speed, in which case the following `sync_file_range` will need to wait on it.
There is a second change in this PR to use `fdatasync` when `sync_file_range` is unavailable (determined statically) or has some known problem with the underlying filesystem (determined dynamically).
The above two changes only apply when the user enables a new option, `strict_bytes_per_sync`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5183
Differential Revision: D14953553
Pulled By: siying
fbshipit-source-id: 445c3862e019fb7b470f9c7f314fc231b62706e9
Summary:
Introduce BlockBasedTableOptions::index_shortening to give users control on which key shortening techniques to be used in building index blocks. Before this patch, both separators and successor keys where shortened in indexes. With this patch, the default is set to kShortenSeparators to only shorten the separators. Since each index block has many separators and only one successor (last key), the change should not have negative impact on index block size. However it should prevent many unnecessary block loads where due to approximation introduced by shorted successor, seek would land us to the previous block and then fix it by moving to the next one.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5174
Differential Revision: D14884185
Pulled By: al13n321
fbshipit-source-id: 1b08bc8c03edcf09b6b8c16e9a7eea08ad4dd534
Summary:
Change the behavior of OptimizeForSmallDb() so that it is less likely to go out of memory.
Change the behavior of OptimizeForPointLookup() to take advantage of the new memtable whole key filter, and move away from prefix extractor as well as hash-based indexing, as they are prone to misuse.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5165
Differential Revision: D14880709
Pulled By: siying
fbshipit-source-id: 9af30e3c9e151eceea6d6b38701a58f1f9fb692d
Summary:
Introducing Periodic Compactions.
This feature allows all the files in a CF to be periodically compacted. It could help in catching any corruptions that could creep into the DB proactively as every file is constantly getting re-compacted. And also, of course, it helps to cleanup data older than certain threshold.
- Introduced a new option `periodic_compaction_time` to control how long a file can live without being compacted in a CF.
- This works across all levels.
- The files are put in the same level after going through the compaction. (Related files in the same level are picked up as `ExpandInputstoCleanCut` is used).
- Compaction filters, if any, are invoked as usual.
- A new table property, `file_creation_time`, is introduced to implement this feature. This property is set to the time at which the SST file was created (and that time is given by the underlying Env/OS).
This feature can be enabled on its own, or in conjunction with `ttl`. It is possible to set a different time threshold for the bottom level when used in conjunction with ttl. Since `ttl` works only on 0 to last but one levels, you could set `ttl` to, say, 1 day, and `periodic_compaction_time` to, say, 7 days. Since `ttl < periodic_compaction_time` all files in last but one levels keep getting picked up based on ttl, and almost never based on periodic_compaction_time. The files in the bottom level get picked up for compaction based on `periodic_compaction_time`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5166
Differential Revision: D14884441
Pulled By: sagar0
fbshipit-source-id: 408426cbacb409c06386a98632dcf90bfa1bda47
Summary:
Annotate all of the logging functions to inform the compiler that these
use printf-style formatting arguments. This allows the compiler to emit
warnings if the format arguments are incorrect.
This also fixes many problems reported now that format string checking
is enabled. Many of these are simply mix-ups in the argument type (e.g,
int vs uint64_t), but in several cases the wrong number of arguments
were being passed in which can cause the code to crash.
The primary motivation for this was to fix the log message in
`DBImpl::SwitchMemtable()` which caused a segfault due to an extra %s
format parameter with no argument supplied.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5089
Differential Revision: D14574795
Pulled By: simpkins
fbshipit-source-id: 0921b03f0743652bf4ae21e414ff54b3bb65422a
Summary:
Just like ReadOptions::background_purge_on_iterator_cleanup but for ColumnFamilyHandle instead of Iterator.
In our use case we sometimes call ColumnFamilyHandle's destructor from low-latency threads, and sometimes it blocks the thread for a few seconds deleting the files. To avoid that, we can either offload ColumnFamilyHandle's destruction to a background thread on our side, or add this option on rocksdb side. This PR does the latter, to be consistent with how we solve exactly the same problem for iterators using background_purge_on_iterator_cleanup option.
(EDIT: It's avoid_unnecessary_blocking_io now, and affects both CF drops and iterator destructors.)
I'm not quite comfortable with having two separate options (background_purge_on_iterator_cleanup and background_purge_on_cf_cleanup) for such a rarely used thing. Maybe we should merge them? Rename background_purge_on_cf_cleanup to something like delete_files_on_background_threads_only or avoid_blocking_io_in_unexpected_places, and make iterators use it instead of the one in ReadOptions? I can do that here if you guys think it's better.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5043
Differential Revision: D14339233
Pulled By: al13n321
fbshipit-source-id: ccf7efa11c85c9a5b91d969bb55627d0fb01e7b8
Summary:
Allow customized merge operator to be loaded from option file/map/string
by allowing users to pre-regiester merge operators to object registry.
Also update HISTORY.md and header files for the same feature for comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5123
Differential Revision: D14658488
Pulled By: siying
fbshipit-source-id: 86ea2fbd2a0a04632d8ea9fceaffefd041f6ae61
Summary:
Even customized ldb may not be able to read data from some databases if
comparator is not standard. We modify option helper to get comparator from
object registry so that we can use customized ldb to read non-standard
comparator.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5106
Differential Revision: D14622107
Pulled By: siying
fbshipit-source-id: 151dcb295a35a4c7d54f919cd4e322a89dc601c9
Summary:
This is a feature to sample data-block compressibility and and report them as stats. 1 in N (tunable) blocks is sampled for compressibility using two algorithms:
1. lz4 or snappy for fast compression
2. zstd or zlib for slow but higher compression.
The stats are reported to the caller as raw-bytes and compressed-bytes. The block continues to be compressed for storage using the specified CompressionType.
The db_bench_tool how has a command line option for specifying the sampling rate. It's default value is 0 (no sampling). To test the overhead for a certain value, users can compare the performance of db_bench_tool, varying the sampling rate. It is unlikely to have a noticeable impact for high values like 20.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4842
Differential Revision: D13629011
Pulled By: shobhitdayal
fbshipit-source-id: 14ca668bcab6499b2a1734edf848eb62a4f4fafa
Summary:
This reverts commit ee1818081f.
We are not ready to deprecate this feature. revert it for now.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5034
Differential Revision: D14287246
Pulled By: siying
fbshipit-source-id: e4beafdeaee1c94364fdaa6ba198218d158339f7
Summary:
This PR adds public `GetStatsHistory` API to retrieve stats history in the form of an std map. The key of the map is the timestamp in microseconds when the stats snapshot is taken, the value is another std map from stats name to stats value (stored in std string). Two DBOptions are introduced: `stats_persist_period_sec` (default 10 minutes) controls the intervals between two snapshots are taken; `max_stats_history_count` (default 10) controls the max number of history snapshots to keep in memory. RocksDB will stop collecting stats snapshots if `stats_persist_period_sec` is set to 0.
(This PR is the in-memory part of https://github.com/facebook/rocksdb/pull/4535)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4748
Differential Revision: D13961471
Pulled By: miasantreble
fbshipit-source-id: ac836d401ecb84ea92216bf9966f969dedf4ad04
Summary:
MyRocks calls `GetForUpdate` on `INSERT`, for unique key check, and in almost all cases GetForUpdate returns empty result. For such cases, whole key bloom filter is helpful.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4985
Differential Revision: D14118257
Pulled By: miasantreble
fbshipit-source-id: d35cb7109c62fd5ad541a26968e3a3e16d3e85ea
Summary:
We introduced ttl option in CompactionOptionsFIFO when ttl-based file
deletion (compaction) was supported only as part of FIFO Compaction. But
with the extension of ttl semantics even to Level compaction,
CompactionOptionsFIFO.ttl can now be deprecated. Instead we will start
using ColumnFamilyOptions.ttl for FIFO compaction as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4965
Differential Revision: D14072960
Pulled By: sagar0
fbshipit-source-id: c98cc2ae695a28136295787cd88d36a220fc219e
Summary:
Cuckoo Hash is less useful than we initially expected. Remove it.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4953
Differential Revision: D13979264
Pulled By: siying
fbshipit-source-id: 2a60afdaa989f045357398b43a1cc5d46f4492ed
Summary:
Store_index_in_file is a less useful feature. To simplify the code to maintain, we are dropping the feature.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4914
Differential Revision: D13791883
Pulled By: siying
fbshipit-source-id: d187c5d662584866103e4b77d09dfb925509ae2e
Summary:
compaction_pri = kMinOverlappingRatio usually provides much better write amplification than the default.
https://github.com/facebook/rocksdb/pull/4907 fixes one shortcome of this option. Make it default.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4911
Differential Revision: D13789262
Pulled By: siying
fbshipit-source-id: d90acf8c4dede44f00d183ca4c7a210259378269
Summary:
The PR is targeting to resolve the issue of:
https://github.com/facebook/rocksdb/issues/3972#issue-330771918
We have a rocksdb created with leveled-compaction with multiple column families (CFs), some of CFs are using HDD to store big and less frequently accessed data and others are using SSD.
When there are continuously write traffics going on to all CFs, the compaction thread pool is mostly occupied by those slow HDD compactions, which blocks fully utilize SSD bandwidth.
Since atomic write and transaction is needed across CFs, so splitting it to multiple rocksdb instance is not an option for us.
With the compaction thread control, we got 30%+ HDD write throughput gain, and also a lot smooth SSD write since less write stall happening.
ConcurrentTaskLimiter can be shared with multi-CFs across rocksdb instances, so the feature does not only work for multi-CFs scenarios, but also for multi-rocksdbs scenarios, who need disk IO resource control per tenant.
The usage is straight forward:
e.g.:
//
// Enable compaction thread limiter thru ColumnFamilyOptions
//
std::shared_ptr<ConcurrentTaskLimiter> ctl(NewConcurrentTaskLimiter("foo_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = ctl;
...
//
// Compaction thread limiter can be tuned or disabled on-the-fly
//
ctl->SetMaxOutstandingTask(12); // enlarge to 12 tasks
...
ctl->ResetMaxOutstandingTask(); // disable (bypass) thread limiter
ctl->SetMaxOutstandingTask(-1); // Same as above
...
ctl->SetMaxOutstandingTask(0); // full throttle (0 task)
//
// Sharing compaction thread limiter among CFs (to resolve multiple storage perf issue)
//
std::shared_ptr<ConcurrentTaskLimiter> ctl_ssd(NewConcurrentTaskLimiter("ssd_limiter", 8));
std::shared_ptr<ConcurrentTaskLimiter> ctl_hdd(NewConcurrentTaskLimiter("hdd_limiter", 4));
Options options;
ColumnFamilyOptions cf_opt_ssd1(options);
ColumnFamilyOptions cf_opt_ssd2(options);
ColumnFamilyOptions cf_opt_hdd1(options);
ColumnFamilyOptions cf_opt_hdd2(options);
ColumnFamilyOptions cf_opt_hdd3(options);
// SSD CFs
cf_opt_ssd1.compaction_thread_limiter = ctl_ssd;
cf_opt_ssd2.compaction_thread_limiter = ctl_ssd;
// HDD CFs
cf_opt_hdd1.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd2.compaction_thread_limiter = ctl_hdd;
cf_opt_hdd3.compaction_thread_limiter = ctl_hdd;
...
//
// The limiter is disabled by default (or set to nullptr explicitly)
//
Options options;
ColumnFamilyOptions cf_opt(options);
cf_opt.compaction_thread_limiter = nullptr;
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4332
Differential Revision: D13226590
Pulled By: siying
fbshipit-source-id: 14307aec55b8bd59c8223d04aa6db3c03d1b0c1d
Summary:
…ons (#4676)"
This reverts commit b32d087dbb.
`MemoryAllocator` needs to be with `Cache`, since cache entry can
outlive DB and block based table. The cache needs to hold reference to
memory allocator when deleting cache entry.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4697
Differential Revision: D13133490
Pulled By: yiwu-arbug
fbshipit-source-id: 8ef7e8a51263bfd929f892fd062665ff4ce9ce5a
Summary:
Per offline discussion with siying, `MemoryAllocator` and `Cache` should be decouple. The idea is that memory allocator handles memory allocation, while cache handle cache policy.
It is normal that external cache libraries pack couple the two components for better optimization. If we want to integrate with such library in the future, we can make a wrapper of the library implementing both `Cache` and `MemoryAllocator` interface.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4676
Differential Revision: D13047662
Pulled By: yiwu-arbug
fbshipit-source-id: cd42e246d80ab600b4de47d073f7d2db308ce6dd
Summary:
In the past, both `DBImpl::atomic_flush_` and
`DBImpl::immutable_db_options_.atomic_flush` exist. However, we fail to set
`immutable_db_options_.atomic_flush`, but use `DBImpl::atomic_flush_` which is
set correctly. This does not lead to incorrect behavior, but is a duplicate of
information.
Since `immutable_db_options_` is always there and has `atomic_flush`, we should
use it as source of truth and remove `DBImpl::atomic_flush_`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4631
Differential Revision: D12928371
Pulled By: riversand963
fbshipit-source-id: f85a811959d3828aad4a3a1b05f71facf19c636d
Summary:
Ran the following commands to recursively change all the files under RocksDB:
```
find . -type f -name "*.cc" -exec sed -i 's/ unique_ptr/ std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<unique_ptr/<std::unique_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/ shared_ptr/ std::shared_ptr/g' {} +
find . -type f -name "*.cc" -exec sed -i 's/<shared_ptr/<std::shared_ptr/g' {} +
```
Running `make format` updated some formatting on the files touched.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4638
Differential Revision: D12934992
Pulled By: sagar0
fbshipit-source-id: 45a15d23c230cdd64c08f9c0243e5183934338a8
Summary:
We want to sample the file I/O issued by RocksDB and report the function calls. This requires us to include the file paths otherwise it's hard to tell what has been going on.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4039
Differential Revision: D8670178
Pulled By: riversand963
fbshipit-source-id: 97ee806d1c583a2983e28e213ee764dc6ac28f7a
Summary:
Add hash index support to data blocks, which helps to reduce the CPU utilization of point-lookup operations. This feature is backward compatible with the data block created without the hash index. It is disabled by default unless `BlockBasedTableOptions::data_block_index_type` is set to `data_block_index_type = kDataBlockBinaryAndHash.`
The DB size would be bigger with the hash index option as a hash table is added at the end of each data block. If the hash utilization ratio is 1:1, the space overhead is one byte per key. The hash table utilization ratio is adjustable using `BlockBasedTableOptions::data_block_hash_table_util_ratio`. A lower utilization ratio will improve more on the point-lookup efficiency, but take more space too.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4174
Differential Revision: D8965914
Pulled By: fgwu
fbshipit-source-id: 1c6bae5d1fc39c80282d8890a72e9e67bc247198
Summary:
A framework of trace analyzing for RocksDB
After collecting the trace by using the tool of [PR #3837](https://github.com/facebook/rocksdb/pull/3837). User can use the Trace Analyzer to interpret, analyze, and characterize the collected workload.
**Input:**
1. trace file
2. Whole keys space file
**Statistics:**
1. Access count of each operation (Get, Put, Delete, SingleDelete, DeleteRange, Merge) in each column family.
2. Key hotness (access count) of each one
3. Key space separation based on given prefix
4. Key size distribution
5. Value size distribution if appliable
6. Top K accessed keys
7. QPS statistics including the average QPS and peak QPS
8. Top K accessed prefix
9. The query correlation analyzing, output the number of X after Y and the corresponding average time
intervals
**Output:**
1. key access heat map (either in the accessed key space or whole key space)
2. trace sequence file (interpret the raw trace file to line base text file for future use)
3. Time serial (The key space ID and its access time)
4. Key access count distritbution
5. Key size distribution
6. Value size distribution (in each intervals)
7. whole key space separation by the prefix
8. Accessed key space separation by the prefix
9. QPS of each operation and each column family
10. Top K QPS and their accessed prefix range
**Test:**
1. Added the unit test of analyzing Get, Put, Delete, SingleDelete, DeleteRange, Merge
2. Generated the trace and analyze the trace
**Implemented but not tested (due to the limitation of trace_replay):**
1. Analyzing Iterator, supporting Seek() and SeekForPrev() analyzing
2. Analyzing the number of Key found by Get
**Future Work:**
1. Support execution time analyzing of each requests
2. Support cache hit situation and block read situation of Get
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4091
Differential Revision: D9256157
Pulled By: zhichao-cao
fbshipit-source-id: f0ceacb7eedbc43a3eee6e85b76087d7832a8fe6
Summary:
Added DataBlockIndexType option in BlockBasedTableOptions.
```
enum DataBlockIndexType : char {
kDataBlockBinarySearch = 0, // traditional block type
kDataBlockHashIndex = 1, // additional hash index appended to the end.
};
```
The default type is the traditional binary seek option: `kDataBlockBinarySearch`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4150
Differential Revision: D8895958
Pulled By: fgwu
fbshipit-source-id: 480adef48104cf11d30db3bad9a73f98b4a80c10
Summary:
We forgot to dump FIFO and Universal compaction options to the LOG when any option was dynamically changed via `SetOptions` API. Now added those options also to `MutableCFOptions::Dump`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4140
Differential Revision: D8865634
Pulled By: sagar0
fbshipit-source-id: 05a93e26ab8e72fec6249acccd09b0eb3e1ef0ac
Summary:
…ression
For `CompressionType` we have options `compression` and `bottommost_compression`. Thus, to make the compression options consitent with the compression type when bottommost_compression is enabled, we add the bottommost_compression_opts
Closes https://github.com/facebook/rocksdb/pull/3985
Reviewed By: riversand963
Differential Revision: D8385911
Pulled By: zhichao-cao
fbshipit-source-id: 07bc533dd61bcf1cef5927d8d62901c13d38d5fc
Summary:
Previously in https://github.com/facebook/rocksdb/pull/3601 bloom filter will only be checked if `prefix_extractor` in the mutable_cf_options matches the one found in the SST file.
This PR relaxes the requirement by checking if all keys in the range [user_key, iterate_upper_bound) all share the same prefix after transforming using the BF in the SST file. If so, the bloom filter is considered compatible and will continue to be looked at.
Closes https://github.com/facebook/rocksdb/pull/3899
Differential Revision: D8157459
Pulled By: miasantreble
fbshipit-source-id: 18d17cba56a1005162f8d5db7a27aba277089c41
Summary:
Top-level index in partitioned index/filter blocks are small and could be pinned in memory. So far we use that by cache_index_and_filter_blocks to false. This however make it difficult to keep account of the total memory usage. This patch introduces pin_top_level_index_and_filter which in combination with cache_index_and_filter_blocks=true keeps the top-level index in cache and yet pinned them to avoid cache misses and also cache lookup overhead.
Closes https://github.com/facebook/rocksdb/pull/4037
Differential Revision: D8596218
Pulled By: maysamyabandeh
fbshipit-source-id: 3a5f7f9ca6b4b525b03ff6bd82354881ae974ad2
Summary:
By using WritableFileWriter rather than WritableFile directly, we can buffer multiple Append() calls to one write() file system call, which will be expensive to underlying Env without its own write buffering.
Closes https://github.com/facebook/rocksdb/pull/3882
Differential Revision: D8080673
Pulled By: siying
fbshipit-source-id: e0db900cb3c178166aa738f3985db65e3ae2cf1b
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
Currently manual_wal_flush if set in the options will be used only for the wal files created during wal switch. The configuration thus does not affect the first wal file. The patch fixes that and also update the related unit tests.
This PR is built on top of https://github.com/facebook/rocksdb/pull/3756
Closes https://github.com/facebook/rocksdb/pull/3824
Differential Revision: D7909153
Pulled By: maysamyabandeh
fbshipit-source-id: 024ed99d2555db06bf096c902b998e432bb7b9ce
Summary:
In `cf_options_type_info`, the deprecated options are all considered to have offset zero in the `MutableCFOptions` struct. Previously we weren't checking in `GetMutableOptionsFromStrings` whether the provided option was deprecated or not and simply writing the provided value to the offset specified by `cf_options_type_info`. That meant setting any deprecated option would overwrite the first element in the struct, which is `write_buffer_size`. `db_stress` hit this often since it calls `SetOptions` with `soft_rate_limit=0` and `hard_rate_limit=0`, which are both deprecated so cause `write_buffer_size` to be set to zero, which causes it to crash on the following assertion:
```
db_stress: db/memtable.cc:106: rocksdb::MemTable::MemTable(const rocksdb::InternalKeyComparator&, const rocksdb::ImmutableCFOptions&, const rocksdb::MutableCFOptions&, rocksdb::WriteBufferManager*, rocksdb::SequenceNumber, uint32_t): Assertion `!ShouldScheduleFlush()' failed.
```
We fix it by skipping deprecated options (and logging a warning) when users provide them to `SetOptions`. I didn't want to fail the call for compatibility reasons.
Closes https://github.com/facebook/rocksdb/pull/3700
Differential Revision: D7572596
Pulled By: ajkr
fbshipit-source-id: bd5d84e14c0c39f30c5d4c6df7c1503d2c28ecf1
Summary:
1. Remove redundant text.
2. Make terminology consistent across all comments and doc of RocksDB. Also do
our best to conform to conventions. Specifically, use 'callback' instead of
'call-back' [wikipedia](https://en.wikipedia.org/wiki/Callback_(computer_programming)).
Closes https://github.com/facebook/rocksdb/pull/3693
Differential Revision: D7560396
Pulled By: riversand963
fbshipit-source-id: ba8c251c487f4e7d1872a1a8dc680f9e35a6ffb8
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Level Compaction with TTL.
As of today, a file could exist in the LSM tree without going through the compaction process for a really long time if there are no updates to the data in the file's key range. For example, in certain use cases, the keys are not actually "deleted"; instead they are just set to empty values. There might not be any more writes to this "deleted" key range, and if so, such data could remain in the LSM for a really long time resulting in wasted space.
Introducing a TTL could solve this problem. Files (and, in turn, data) older than TTL will be scheduled for compaction when there is no other background work. This will make the data go through the regular compaction process and get rid of old unwanted data.
This also has the (good) side-effect of all the data in the non-bottommost level being newer than ttl, and all data in the bottommost level older than ttl. It could lead to more writes while reducing space.
This functionality can be controlled by the newly introduced column family option -- ttl.
TODO for later:
- Make ttl mutable
- Extend TTL to Universal compaction as well? (TTL is already supported in FIFO)
- Maybe deprecate CompactionOptionsFIFO.ttl in favor of this new ttl option.
Closes https://github.com/facebook/rocksdb/pull/3591
Differential Revision: D7275442
Pulled By: sagar0
fbshipit-source-id: dcba484717341200d419b0953dafcdf9eb2f0267
Summary:
Provide a block_align option in BlockBasedTableOptions to allow
alignment of SST file data blocks. This will avoid higher
IOPS/throughput load due to < 4KB data blocks spanning 2 4KB pages.
When this option is set to true, the block alignment is set to lower of
block size and 4KB.
Closes https://github.com/facebook/rocksdb/pull/3502
Differential Revision: D7400897
Pulled By: anand1976
fbshipit-source-id: 04cc3bd144e88e3431a4f97604e63ad7a0f06d44
Summary:
enable_pipelined_write was not set in BuildDBOptions() causing its default
value to be dumped in the OPTIONS file
Closes https://github.com/facebook/rocksdb/pull/3585
Differential Revision: D7226395
Pulled By: yiwu-arbug
fbshipit-source-id: 45a659a48d18103ac9ee74bb8805dd0a6ec12474
