Commit Graph

151 Commits

Author SHA1 Message Date
Andrew Kryczka
fd43ee09da Range deletion microoptimizations
Summary:
- Made RangeDelAggregator's InternalKeyComparator member a reference-to-const so we don't need to copy-construct it. Also added InternalKeyComparator to ImmutableCFOptions so we don't need to construct one for each DBIter.
- Made MemTable::NewRangeTombstoneIterator and the table readers' NewRangeTombstoneIterator() functions return nullptr instead of NewEmptyInternalIterator to avoid the allocation. Updated callers accordingly.
Closes https://github.com/facebook/rocksdb/pull/1548

Differential Revision: D4208169

Pulled By: ajkr

fbshipit-source-id: 2fd65cf
2016-11-21 12:24:13 -08:00
Andrew Kryczka
3f62215210 Lazily initialize RangeDelAggregator's map and pinning manager
Summary:
Since a RangeDelAggregator is created for each read request, these heap-allocating member variables were consuming significant CPU (~3% total) which slowed down request throughput. The map and pinning manager are only necessary when range deletions exist, so we can defer their initialization until the first range deletion is encountered. Currently lazy initialization is done for reads only since reads pass us a single snapshot, which is easier to store on the stack for later insertion into the map than the vector passed to us by flush or compaction.

Note the Arena member variable is still expensive, I will figure out what to do with it in a subsequent diff. It cannot be lazily initialized because we currently use this arena even to allocate empty iterators, which is necessary even when no range deletions exist.
Closes https://github.com/facebook/rocksdb/pull/1539

Differential Revision: D4203488

Pulled By: ajkr

fbshipit-source-id: 3b36279
2016-11-18 17:09:11 -08:00
Andrew Kryczka
9e7cf3469b DeleteRange user iterator support
Summary:
Note: reviewed in  https://reviews.facebook.net/D65115

- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464

Differential Revision: D4131753

Pulled By: ajkr

fbshipit-source-id: be86559
2016-11-04 12:09:22 -07:00
Aaron Gao
5e0d6b4cc9 fix db_stress assertion failure
Summary: in rocksdb::DBIter::FindValueForCurrentKey(), last_not_merge_type could also be SingleDelete() which is omitted

Test Plan: db_iter_test

Reviewers: yhchiang, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65187
2016-10-18 16:07:10 -07:00
Aaron Gao
21e8daced5 fix assertion failure in Prev()
Summary:
fix assertion failure in db_stress.
It happens because of prefix seek key is larger than merge iterator key when they have the same user key

Test Plan: ./db_stress --max_background_compactions=1 --max_write_buffer_number=3 --sync=0 --reopen=20 --write_buffer_size=33554432 --delpercent=5 --log2_keys_per_lock=10 --block_size=16384 --allow_concurrent_memtable_write=0 --test_batches_snapshots=0 --max_bytes_for_level_base=67108864 --progress_reports=0 --mmap_read=0 --writepercent=35 --disable_data_sync=0 --readpercent=50 --subcompactions=4 --ops_per_thread=20000000 --memtablerep=skip_list --prefix_size=0 --target_file_size_multiplier=1 --column_families=1 --threads=32 --disable_wal=0 --open_files=500000 --destroy_db_initially=0 --target_file_size_base=16777216 --nooverwritepercent=1 --iterpercent=10 --max_key=100000000 --prefixpercent=0 --use_clock_cache=false --kill_random_test=888887 --cache_size=1048576 --verify_checksum=1

Reviewers: sdong, andrewkr, yiwu, yhchiang

Reviewed By: yhchiang

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D65025
2016-10-13 17:36:48 -07:00
Aaron Gao
447f17127c new Prev() prefix support using SeekForPrev()
Summary:
1) The previous solution for Prev() prefix support is not clean.
Since I add api SeekForPrev(), now the Prev() can be symmetric to Next().
and we do not need SeekToLast() to be called in Prev() any more.

Also, Next() will Seek(prefix_seek_key_) to solve the problem of possible inconsistency between db_iter and merge_iter when
there is merge_operator. And prefix_seek_key is only refreshed when change direction to forward.

2) This diff also solves the bug of Iterator::SeekToLast() with iterate_upper_bound_ with prefix extractor.

add test cases for the above two cases.

There are some tests for the SeekToLast() in Prev(), I will clean them later.

Test Plan: make all check

Reviewers: IslamAbdelRahman, andrewkr, yiwu, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D63933
2016-10-11 13:54:26 -07:00
Aaron Gao
26388247aa delete unused variable for PrevInterval()
Summary: delete unused variable

Test Plan: make check

Reviewers: sdong, andrewkr, IslamAbdelRahman, tianx

Reviewed By: tianx

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64509
2016-09-29 13:19:58 -07:00
Aaron Gao
f517d9dd09 Add SeekForPrev() to Iterator
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()

Also add tests in db_iter_test and db_iterator_test

Pass all tests
Cheers!

Test Plan: make all check -j64

Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64149
2016-09-27 18:20:57 -07:00
Islam AbdelRahman
1cca091298 Temporarily revert Prev() prefix support
Summary:
Temporarily revert commits for supporting prefix Prev() to unblock MyRocks and RocksDB release

These are the commits reverted

  - 6a14d55bd9
  - b18f9c9eac
  - db74b1a219
  - 2482d5fb45

Test Plan: make check -j64

Reviewers: sdong, lightmark

Reviewed By: lightmark

Subscribers: andrewkr, dhruba, yoshinorim

Differential Revision: https://reviews.facebook.net/D63789
2016-09-08 14:45:32 -07:00
Aaron Gao
2482d5fb45 support Prev() in prefix seek mode
Summary: As title, make sure Prev() works as expected with Next() when the current iter->key() in the range of the same prefix in prefix seek mode

Test Plan: make all check -j64 (add prefix_test with PrefixSeekModePrev test case)

Reviewers: andrewkr, sdong, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: yoshinorim, andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D61419
2016-08-29 20:55:39 -07:00
Islam AbdelRahman
b693ba68b5 Minor PinnedIteratorsManager Refactoring
Summary:
This diff include these simple change
- Rename ReleasePinnedIterators to ReleasePinnedData
- Rename PinIteratorIfNeeded to PinIterator
- Use std::vector directly in PinnedIteratorsManager instead of std::unique_ptr<std::vector>
- Generalize PinnedIteratorsManager by adding PinPtr which can pin any pointer

Test Plan: existing tests

Reviewers: sdong, yiwu, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D61305
2016-08-11 11:54:17 -07:00
Islam AbdelRahman
68a8e6b8fa Introduce FullMergeV2 (eliminate memcpy from merge operators)
Summary:
This diff update the code to pin the merge operator operands while the merge operation is done, so that we can eliminate the memcpy cost, to do that we need a new public API for FullMerge that replace the std::deque<std::string> with std::vector<Slice>

This diff is stacked on top of D56493 and D56511

In this diff we
- Update FullMergeV2 arguments to be encapsulated in MergeOperationInput and MergeOperationOutput which will make it easier to add new arguments in the future
- Replace std::deque<std::string> with std::vector<Slice> to pass operands
- Replace MergeContext std::deque with std::vector (based on a simple benchmark I ran https://gist.github.com/IslamAbdelRahman/78fc86c9ab9f52b1df791e58943fb187)
- Allow FullMergeV2 output to be an existing operand

```
[Everything in Memtable | 10K operands | 10 KB each | 1 operand per key]

DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=10000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000

[FullMergeV2]
readseq      :       0.607 micros/op 1648235 ops/sec; 16121.2 MB/s
readseq      :       0.478 micros/op 2091546 ops/sec; 20457.2 MB/s
readseq      :       0.252 micros/op 3972081 ops/sec; 38850.5 MB/s
readseq      :       0.237 micros/op 4218328 ops/sec; 41259.0 MB/s
readseq      :       0.247 micros/op 4043927 ops/sec; 39553.2 MB/s

[master]
readseq      :       3.935 micros/op 254140 ops/sec; 2485.7 MB/s
readseq      :       3.722 micros/op 268657 ops/sec; 2627.7 MB/s
readseq      :       3.149 micros/op 317605 ops/sec; 3106.5 MB/s
readseq      :       3.125 micros/op 320024 ops/sec; 3130.1 MB/s
readseq      :       4.075 micros/op 245374 ops/sec; 2400.0 MB/s
```

```
[Everything in Memtable | 10K operands | 10 KB each | 10 operand per key]

DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --merge_keys=1000 --num=10000 --disable_auto_compactions --value_size=10240 --write_buffer_size=1000000000

[FullMergeV2]
readseq      :       3.472 micros/op 288018 ops/sec; 2817.1 MB/s
readseq      :       2.304 micros/op 434027 ops/sec; 4245.2 MB/s
readseq      :       1.163 micros/op 859845 ops/sec; 8410.0 MB/s
readseq      :       1.192 micros/op 838926 ops/sec; 8205.4 MB/s
readseq      :       1.250 micros/op 800000 ops/sec; 7824.7 MB/s

[master]
readseq      :      24.025 micros/op 41623 ops/sec;  407.1 MB/s
readseq      :      18.489 micros/op 54086 ops/sec;  529.0 MB/s
readseq      :      18.693 micros/op 53495 ops/sec;  523.2 MB/s
readseq      :      23.621 micros/op 42335 ops/sec;  414.1 MB/s
readseq      :      18.775 micros/op 53262 ops/sec;  521.0 MB/s

```

```
[Everything in Block cache | 10K operands | 10 KB each | 1 operand per key]

[FullMergeV2]
$ DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions
readseq      :      14.741 micros/op 67837 ops/sec;  663.5 MB/s
readseq      :       1.029 micros/op 971446 ops/sec; 9501.6 MB/s
readseq      :       0.974 micros/op 1026229 ops/sec; 10037.4 MB/s
readseq      :       0.965 micros/op 1036080 ops/sec; 10133.8 MB/s
readseq      :       0.943 micros/op 1060657 ops/sec; 10374.2 MB/s

[master]
readseq      :      16.735 micros/op 59755 ops/sec;  584.5 MB/s
readseq      :       3.029 micros/op 330151 ops/sec; 3229.2 MB/s
readseq      :       3.136 micros/op 318883 ops/sec; 3119.0 MB/s
readseq      :       3.065 micros/op 326245 ops/sec; 3191.0 MB/s
readseq      :       3.014 micros/op 331813 ops/sec; 3245.4 MB/s
```

```
[Everything in Block cache | 10K operands | 10 KB each | 10 operand per key]

DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readseq,readseq,readseq,readseq,readseq" --merge_operator="max" --num=100000 --db="/dev/shm/merge-random-10-operands-10K-10KB" --cache_size=1000000000 --use_existing_db --disable_auto_compactions

[FullMergeV2]
readseq      :      24.325 micros/op 41109 ops/sec;  402.1 MB/s
readseq      :       1.470 micros/op 680272 ops/sec; 6653.7 MB/s
readseq      :       1.231 micros/op 812347 ops/sec; 7945.5 MB/s
readseq      :       1.091 micros/op 916590 ops/sec; 8965.1 MB/s
readseq      :       1.109 micros/op 901713 ops/sec; 8819.6 MB/s

[master]
readseq      :      27.257 micros/op 36687 ops/sec;  358.8 MB/s
readseq      :       4.443 micros/op 225073 ops/sec; 2201.4 MB/s
readseq      :       5.830 micros/op 171526 ops/sec; 1677.7 MB/s
readseq      :       4.173 micros/op 239635 ops/sec; 2343.8 MB/s
readseq      :       4.150 micros/op 240963 ops/sec; 2356.8 MB/s
```

Test Plan: COMPILE_WITH_ASAN=1 make check -j64

Reviewers: yhchiang, andrewkr, sdong

Reviewed By: sdong

Subscribers: lovro, andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D57075
2016-07-20 09:49:03 -07:00
Islam AbdelRahman
7c919deccc Reuse TimedFullMerge instead of FullMerge + instrumentation
Summary:
We have alot of code duplication whenever we call FullMerge we keep duplicating the instrumentation and statistics code
This is a simple diff to refactor the code to use TimedFullMerge instead of FullMerge

Test Plan: COMPILE_WITH_ASAN=1 make check -j64

Reviewers: andrewkr, yhchiang, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D59577
2016-06-13 16:17:26 -07:00
Islam AbdelRahman
ff4b3fb5b4 Fix Iterator::Prev memory pinning bug
Summary: We should not use IterKey::SetKey with copy = false except if we are pinning the iterator thru it's life time, otherwise we may release the temporarily pinned blocks and in this case the IterKey will be pointing to freed memory

Test Plan: added a new test

Reviewers: sdong, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D57561
2016-05-03 16:50:01 -07:00
Islam AbdelRahman
6e801b0bd1 Eliminate memcpy in Iterator::Prev() by pinning blocks for keys spanning multiple blocks
Summary:
This diff is stacked on top of this diff https://reviews.facebook.net/D56493
The current Iterator::Prev() implementation need to copy every value since the underlying Iterator may move after reading the value.
This can be optimized by making sure that the block containing the value is pinned until the Iterator move. which will improve the throughput by up to 1.5X

master
```
==> 1000000_Keys_100Byte.txt <==
readreverse  :       0.449 micros/op 2225887 ops/sec;  246.2 MB/s
readreverse  :       0.433 micros/op 2311508 ops/sec;  255.7 MB/s
readreverse  :       0.436 micros/op 2294335 ops/sec;  253.8 MB/s
readreverse  :       0.471 micros/op 2121295 ops/sec;  234.7 MB/s
readreverse  :       0.465 micros/op 2152227 ops/sec;  238.1 MB/s
readreverse  :       0.454 micros/op 2203011 ops/sec;  243.7 MB/s
readreverse  :       0.451 micros/op 2216095 ops/sec;  245.2 MB/s
readreverse  :       0.462 micros/op 2162447 ops/sec;  239.2 MB/s
readreverse  :       0.476 micros/op 2099151 ops/sec;  232.2 MB/s
readreverse  :       0.472 micros/op 2120710 ops/sec;  234.6 MB/s

avg : 242.34 MB/s

==> 1000000_Keys_1KB.txt <==
readreverse  :       1.013 micros/op 986793 ops/sec;  978.7 MB/s
readreverse  :       0.942 micros/op 1061136 ops/sec; 1052.5 MB/s
readreverse  :       0.951 micros/op 1051901 ops/sec; 1043.3 MB/s
readreverse  :       0.932 micros/op 1072894 ops/sec; 1064.1 MB/s
readreverse  :       1.024 micros/op 976720 ops/sec;  968.7 MB/s
readreverse  :       0.935 micros/op 1069169 ops/sec; 1060.4 MB/s
readreverse  :       1.012 micros/op 988132 ops/sec;  980.1 MB/s
readreverse  :       0.962 micros/op 1039579 ops/sec; 1031.1 MB/s
readreverse  :       0.991 micros/op 1008924 ops/sec; 1000.7 MB/s
readreverse  :       1.004 micros/op 996144 ops/sec;  988.0 MB/s

avg : 1016.76 MB/s

==> 1000000_Keys_10KB.txt <==
readreverse  :       4.167 micros/op 239952 ops/sec; 2346.9 MB/s
readreverse  :       4.070 micros/op 245713 ops/sec; 2403.3 MB/s
readreverse  :       4.572 micros/op 218733 ops/sec; 2139.4 MB/s
readreverse  :       4.497 micros/op 222388 ops/sec; 2175.2 MB/s
readreverse  :       4.203 micros/op 237920 ops/sec; 2327.1 MB/s
readreverse  :       4.206 micros/op 237756 ops/sec; 2325.5 MB/s
readreverse  :       4.181 micros/op 239149 ops/sec; 2339.1 MB/s
readreverse  :       4.157 micros/op 240552 ops/sec; 2352.8 MB/s
readreverse  :       4.187 micros/op 238848 ops/sec; 2336.1 MB/s
readreverse  :       4.106 micros/op 243575 ops/sec; 2382.4 MB/s

avg : 2312.78 MB/s

==> 100000_Keys_100KB.txt <==
readreverse  :      41.281 micros/op 24224 ops/sec; 2366.0 MB/s
readreverse  :      39.722 micros/op 25175 ops/sec; 2458.9 MB/s
readreverse  :      40.319 micros/op 24802 ops/sec; 2422.5 MB/s
readreverse  :      39.762 micros/op 25149 ops/sec; 2456.4 MB/s
readreverse  :      40.916 micros/op 24440 ops/sec; 2387.1 MB/s
readreverse  :      41.188 micros/op 24278 ops/sec; 2371.4 MB/s
readreverse  :      40.061 micros/op 24962 ops/sec; 2438.1 MB/s
readreverse  :      40.221 micros/op 24862 ops/sec; 2428.4 MB/s
readreverse  :      40.084 micros/op 24947 ops/sec; 2436.7 MB/s
readreverse  :      40.655 micros/op 24597 ops/sec; 2402.4 MB/s

avg : 2416.79 MB/s

==> 10000_Keys_1MB.txt <==
readreverse  :     298.038 micros/op 3355 ops/sec; 3355.3 MB/s
readreverse  :     335.001 micros/op 2985 ops/sec; 2985.1 MB/s
readreverse  :     286.956 micros/op 3484 ops/sec; 3484.9 MB/s
readreverse  :     329.954 micros/op 3030 ops/sec; 3030.8 MB/s
readreverse  :     306.428 micros/op 3263 ops/sec; 3263.5 MB/s
readreverse  :     330.749 micros/op 3023 ops/sec; 3023.5 MB/s
readreverse  :     328.903 micros/op 3040 ops/sec; 3040.5 MB/s
readreverse  :     324.853 micros/op 3078 ops/sec; 3078.4 MB/s
readreverse  :     320.488 micros/op 3120 ops/sec; 3120.3 MB/s
readreverse  :     320.536 micros/op 3119 ops/sec; 3119.8 MB/s

avg : 3150.21 MB/s
```

After memcpy elimination
```

==> 1000000_Keys_100Byte.txt <==
readreverse  :       0.395 micros/op 2529890 ops/sec;  279.9 MB/s
readreverse  :       0.368 micros/op 2715922 ops/sec;  300.5 MB/s
readreverse  :       0.384 micros/op 2603929 ops/sec;  288.1 MB/s
readreverse  :       0.375 micros/op 2663286 ops/sec;  294.6 MB/s
readreverse  :       0.357 micros/op 2802180 ops/sec;  310.0 MB/s
readreverse  :       0.363 micros/op 2757684 ops/sec;  305.1 MB/s
readreverse  :       0.372 micros/op 2689603 ops/sec;  297.5 MB/s
readreverse  :       0.379 micros/op 2638599 ops/sec;  291.9 MB/s
readreverse  :       0.375 micros/op 2663803 ops/sec;  294.7 MB/s
readreverse  :       0.375 micros/op 2665579 ops/sec;  294.9 MB/s

avg: 295.72 MB/s (1.22 X)

==> 1000000_Keys_1KB.txt <==
readreverse  :       0.879 micros/op 1138112 ops/sec; 1128.8 MB/s
readreverse  :       0.842 micros/op 1187998 ops/sec; 1178.3 MB/s
readreverse  :       0.837 micros/op 1194915 ops/sec; 1185.1 MB/s
readreverse  :       0.845 micros/op 1182983 ops/sec; 1173.3 MB/s
readreverse  :       0.877 micros/op 1140308 ops/sec; 1131.0 MB/s
readreverse  :       0.849 micros/op 1177581 ops/sec; 1168.0 MB/s
readreverse  :       0.915 micros/op 1093284 ops/sec; 1084.3 MB/s
readreverse  :       0.863 micros/op 1159418 ops/sec; 1149.9 MB/s
readreverse  :       0.895 micros/op 1117670 ops/sec; 1108.5 MB/s
readreverse  :       0.852 micros/op 1174116 ops/sec; 1164.5 MB/s

avg: 1147.17 MB/s (1.12 X)

==> 1000000_Keys_10KB.txt <==
readreverse  :       3.870 micros/op 258386 ops/sec; 2527.2 MB/s
readreverse  :       3.568 micros/op 280296 ops/sec; 2741.5 MB/s
readreverse  :       4.005 micros/op 249694 ops/sec; 2442.2 MB/s
readreverse  :       3.550 micros/op 281719 ops/sec; 2755.5 MB/s
readreverse  :       3.562 micros/op 280758 ops/sec; 2746.1 MB/s
readreverse  :       3.507 micros/op 285125 ops/sec; 2788.8 MB/s
readreverse  :       3.463 micros/op 288739 ops/sec; 2824.1 MB/s
readreverse  :       3.428 micros/op 291734 ops/sec; 2853.4 MB/s
readreverse  :       3.553 micros/op 281491 ops/sec; 2753.2 MB/s
readreverse  :       3.535 micros/op 282885 ops/sec; 2766.9 MB/s

avg : 2719.89 MB/s (1.17 X)

==> 100000_Keys_100KB.txt <==
readreverse  :      22.815 micros/op 43830 ops/sec; 4281.0 MB/s
readreverse  :      29.957 micros/op 33381 ops/sec; 3260.4 MB/s
readreverse  :      25.334 micros/op 39473 ops/sec; 3855.4 MB/s
readreverse  :      23.037 micros/op 43409 ops/sec; 4239.8 MB/s
readreverse  :      27.810 micros/op 35958 ops/sec; 3512.1 MB/s
readreverse  :      30.327 micros/op 32973 ops/sec; 3220.6 MB/s
readreverse  :      29.704 micros/op 33665 ops/sec; 3288.2 MB/s
readreverse  :      29.423 micros/op 33987 ops/sec; 3319.6 MB/s
readreverse  :      23.334 micros/op 42856 ops/sec; 4185.9 MB/s
readreverse  :      29.969 micros/op 33368 ops/sec; 3259.1 MB/s

avg : 3642.21 MB/s (1.5 X)

==> 10000_Keys_1MB.txt <==
readreverse  :     244.748 micros/op 4085 ops/sec; 4085.9 MB/s
readreverse  :     230.208 micros/op 4343 ops/sec; 4344.0 MB/s
readreverse  :     235.655 micros/op 4243 ops/sec; 4243.6 MB/s
readreverse  :     235.730 micros/op 4242 ops/sec; 4242.2 MB/s
readreverse  :     237.346 micros/op 4213 ops/sec; 4213.3 MB/s
readreverse  :     227.306 micros/op 4399 ops/sec; 4399.4 MB/s
readreverse  :     194.957 micros/op 5129 ops/sec; 5129.4 MB/s
readreverse  :     238.359 micros/op 4195 ops/sec; 4195.4 MB/s
readreverse  :     221.588 micros/op 4512 ops/sec; 4513.0 MB/s
readreverse  :     235.911 micros/op 4238 ops/sec; 4239.0 MB/s

avg : 4360.52 MB/s (1.38 X)
```

Test Plan: COMPILE_WITH_ASAN=1 make check -j64

Reviewers: andrewkr, yhchiang, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D56511
2016-05-02 21:46:30 -07:00
Peter Mattis
c6c770a1ac Use prefix_same_as_start to avoid iteration in FindNextUserEntryInternal. (#1102)
This avoids excessive iteration in tombstone fields.
2016-04-28 16:48:03 -07:00
Islam AbdelRahman
d719b095dc Introduce PinnedIteratorsManager (Reduce PinData() overhead / Refactor PinData)
Summary:
While trying to reuse PinData() / ReleasePinnedData() .. to optimize away some memcpys I realized that there is a significant overhead for using PinData() / ReleasePinnedData if they were called many times.
This diff refactor the pinning logic by introducing PinnedIteratorsManager a centralized component that will be created once and will be notified whenever we need to Pin an Iterator. This implementation have much less overhead than the original implementation

Test Plan:
make check -j64
COMPILE_WITH_ASAN=1 make check -j64

Reviewers: yhchiang, sdong, andrewkr

Reviewed By: andrewkr

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D56493
2016-04-26 12:41:07 -07:00
Islam AbdelRahman
8a1a603fdb Eliminate std::deque initialization while iterating over merge operands
Summary:
This patch is similar to D52563, When we iterate over a DB with merge operands we keep creating std::queue to store the operands, optimize this by reusing merge_operands_ data member

Before the patch

```
./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq" --db="/dev/shm/bench_merge_memcpy_on_the_fly/" --merge_operator="put" --merge_keys=10000 --num=10000

DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
mergerandom  :       3.757 micros/op 266141 ops/sec;   29.4 MB/s ( updates:10000)
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.413 micros/op 2423538 ops/sec;  268.1 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.451 micros/op 2219071 ops/sec;  245.5 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.420 micros/op 2382039 ops/sec;  263.5 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.408 micros/op 2452017 ops/sec;  271.3 MB/s

DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
mergerandom  :       3.947 micros/op 253376 ops/sec;   28.0 MB/s ( updates:10000)
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.441 micros/op 2266473 ops/sec;  250.7 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.471 micros/op 2122033 ops/sec;  234.8 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.440 micros/op 2271407 ops/sec;  251.3 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.429 micros/op 2331471 ops/sec;  257.9 MB/s
```

with the patch

```
./db_bench --benchmarks="mergerandom,readseq,readseq,readseq,readseq" --db="/dev/shm/bench_merge_memcpy_on_the_fly/" --merge_operator="put" --merge_keys=10000 --num=10000

DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
mergerandom  :       4.080 micros/op 245092 ops/sec;   27.1 MB/s ( updates:10000)
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.308 micros/op 3241843 ops/sec;  358.6 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.312 micros/op 3200408 ops/sec;  354.0 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.332 micros/op 3013962 ops/sec;  333.4 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.300 micros/op 3328017 ops/sec;  368.2 MB/s

DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
mergerandom  :       3.973 micros/op 251705 ops/sec;   27.8 MB/s ( updates:10000)
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.320 micros/op 3123752 ops/sec;  345.6 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.335 micros/op 2986641 ops/sec;  330.4 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.339 micros/op 2950047 ops/sec;  326.4 MB/s
DB path: [/dev/shm/bench_merge_memcpy_on_the_fly/]
readseq      :       0.319 micros/op 3131565 ops/sec;  346.4 MB/s
```

Test Plan: make check -j64

Reviewers: yhchiang, andrewkr, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D56031
2016-04-01 15:48:55 -07:00
Islam AbdelRahman
580fede347 Aggregate hot Iterator counters in LocalStatistics (DBIter::Next perf regression)
Summary:
This patch bump the counters in the frequent code path DBIter::Next() / DBIter::Prev() in a local data members and send them to Statistics when the iterator is destroyed
A better solution will be to have thread_local implementation for Statistics

New performance
```
readseq      :       0.035 micros/op 28597881 ops/sec; 3163.7 MB/s
     1,851,568,819      stalled-cycles-frontend   #   31.29% frontend cycles idle    [49.86%]
       884,929,823      stalled-cycles-backend    #   14.95% backend  cycles idle    [50.21%]
readreverse  :       0.071 micros/op 14077393 ops/sec; 1557.3 MB/s
     3,239,575,993      stalled-cycles-frontend   #   27.36% frontend cycles idle    [49.96%]
     1,558,253,983      stalled-cycles-backend    #   13.16% backend  cycles idle    [50.14%]

```

Existing performance

```
readreverse  :       0.174 micros/op 5732342 ops/sec;  634.1 MB/s
    20,570,209,389      stalled-cycles-frontend   #   70.71% frontend cycles idle    [50.01%]
    18,422,816,837      stalled-cycles-backend    #   63.33% backend  cycles idle    [50.04%]

readseq      :       0.119 micros/op 8400537 ops/sec;  929.3 MB/s
    15,634,225,844      stalled-cycles-frontend   #   79.07% frontend cycles idle    [49.96%]
    14,227,427,453      stalled-cycles-backend    #   71.95% backend  cycles idle    [50.09%]
```

Test Plan: unit tests

Reviewers: yhchiang, sdong, igor

Reviewed By: sdong

Subscribers: andrewkr, dhruba

Differential Revision: https://reviews.facebook.net/D55107
2016-03-11 19:01:12 -08:00
sdong
294bdf9ee2 Change Property name from "rocksdb.current_version_number" to "rocksdb.current-super-version-number"
Summary: I realized I again is wrong about the naming convention. Let me change it to the correct one.

Test Plan: Run unit tests.

Reviewers: IslamAbdelRahman, kradhakrishnan, yhchiang, andrewkr

Reviewed By: andrewkr

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D55041
2016-03-04 18:15:29 -08:00
sdong
e79ad9e184 Add Iterator Property rocksdb.iterator.version_number
Summary: We want to provide a way to detect whether an iterator is stale and needs to be recreated. Add a iterator property to return version number.

Test Plan: Add two unit tests for it.

Reviewers: IslamAbdelRahman, yhchiang, anthony, kradhakrishnan, andrewkr

Reviewed By: andrewkr

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D54921
2016-03-02 16:23:59 -08:00
sdong
74b660702e Rename iterator property "rocksdb.iterator.is.key.pinned" => "rocksdb.iterator.is-key-pinned"
Summary: Rename iterator property to folow property naming convention.

Test Plan: Run all existing tests.

Reviewers: andrewkr, anthony, yhchiang, kradhakrishnan, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D54957
2016-03-01 13:47:12 -08:00
sdong
1f5954147b Introduce Iterator::GetProperty() and replace Iterator::IsKeyPinned()
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator

Test Plan: Rerun existing tests and add a negative test case.

Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D54783
2016-02-29 14:01:31 -08:00
Peter Mattis
239aaf2fc0 Use user_comparator when comparing against iterate_upper_bound.
Fixes #983.
2016-02-11 08:47:16 -05:00
Baraa Hamodi
21e95811d1 Updated all copyright headers to the new format. 2016-02-09 15:12:00 -08:00
Islam AbdelRahman
8c71eb5afc Optimize DBIter::Prev() by reducing stack overhead
Summary:
It looks like we are spending significant amount of time creating std::deque<std::string> every time we do Iterator::Prev()

{F921567}

By using merge_operands_ as a DBIter data member w create it once and reduce this overhead and see ~30% performance improvement when using Iterator::Prev() on hot data

Orignal performance

```
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readreverse" --db="/dev/shm/bench_prev_opt/" --use_existing_db --disable_auto_compactions
readreverse  :       0.713 micros/op 1402219 ops/sec;  155.1 MB/s
readreverse  :       0.609 micros/op 1641386 ops/sec;  181.6 MB/s
readreverse  :       0.684 micros/op 1461150 ops/sec;  161.6 MB/s
readreverse  :       0.629 micros/op 1589842 ops/sec;  175.9 MB/s
readreverse  :       0.647 micros/op 1544530 ops/sec;  170.9 MB/s
```

After optimization

```
DEBUG_LEVEL=0 make db_bench -j64 && ./db_bench --benchmarks="readreverse" --db="/dev/shm/bench_prev_opt/" --use_existing_db --disable_auto_compactions
readreverse  :       0.488 micros/op 2051189 ops/sec;  226.9 MB/s
readreverse  :       0.505 micros/op 1980892 ops/sec;  219.1 MB/s
readreverse  :       0.541 micros/op 1846971 ops/sec;  204.3 MB/s
readreverse  :       0.497 micros/op 2013612 ops/sec;  222.8 MB/s
readreverse  :       0.480 micros/op 2082665 ops/sec;  230.4 MB/s
```

Test Plan: make check -j64

Reviewers: sdong, anthony, rven, igor, yhchiang

Reviewed By: yhchiang

Subscribers: jkedgar, dhruba

Differential Revision: https://reviews.facebook.net/D52563
2016-01-07 07:59:14 -08:00
Islam AbdelRahman
aececc209e Introduce ReadOptions::pin_data (support zero copy for keys)
Summary:
This patch update the Iterator API to introduce new functions that allow users to keep the Slices returned by key() valid as long as the Iterator is not deleted

ReadOptions::pin_data : If true keep loaded blocks in memory as long as the iterator is not deleted
Iterator::IsKeyPinned() : If true, this mean that the Slice returned by key() is valid as long as the iterator is not deleted

Also add a new option BlockBasedTableOptions::use_delta_encoding to allow users to disable delta_encoding if needed.

Benchmark results (using https://phabricator.fb.com/P20083553)

```
// $ du -h /home/tec/local/normal.4K.Snappy/db10077
// 6.1G    /home/tec/local/normal.4K.Snappy/db10077

// $ du -h /home/tec/local/zero.8K.LZ4/db10077
// 6.4G    /home/tec/local/zero.8K.LZ4/db10077

// Benchmarks for shard db10077
// _build/opt/rocks/benchmark/rocks_copy_benchmark \
//      --normal_db_path="/home/tec/local/normal.4K.Snappy/db10077" \
//      --zero_db_path="/home/tec/local/zero.8K.LZ4/db10077"

// First run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp          relative  time/iter  iters/s
// ============================================================================
// BM_StringCopy                                                 1.73s  576.97m
// BM_StringPiece                                   103.74%      1.67s  598.55m
// ============================================================================
// Match rate : 1000000 / 1000000

// Second run
// ============================================================================
// rocks/benchmark/RocksCopyBenchmark.cpp          relative  time/iter  iters/s
// ============================================================================
// BM_StringCopy                                              611.99ms     1.63
// BM_StringPiece                                   203.76%   300.35ms     3.33
// ============================================================================
// Match rate : 1000000 / 1000000
```

Test Plan: Unit tests

Reviewers: sdong, igor, anthony, yhchiang, rven

Reviewed By: rven

Subscribers: dhruba, lovro, adsharma

Differential Revision: https://reviews.facebook.net/D48999
2015-12-16 12:08:30 -08:00
sdong
459c7fba36 Revert previous behavior of internal_key_skipped_count
Summary: With recent commit 33e0c93826, db iterator skips perf context counter internal_key_skipped_count when blindly issuing internal Next(). Now increment the counter by one when issuing this Next()

Test Plan: Run all existing tests

Reviewers: rven, yhchiang, IslamAbdelRahman, kradhakrishnan, igor, anthony

Reviewed By: anthony

Subscribers: yoshinorim, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D51465
2015-11-30 21:55:05 -08:00
sdong
33e0c93826 Reduce extra key comparision in DBIter::Next()
Summary: Now DBIter::Next() always compares with current key with itself first, which is unnecessary if the last key is not a merge key. I made the change and didn't see db_iter_test fails. Want to hear whether people have any idea what I miss.

Test Plan: Run all unit tests

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D48279
2015-11-24 17:16:18 -08:00
Venkatesh Radhakrishnan
ae7940b628 Fix regression failure in PrefixTest.PrefixValid
Summary: Use IterKey to store prefix_start_ so that it doesn't get freed

Test Plan: PrefixTest.PrefixValid

Reviewers: anthony, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D50289
2015-11-05 16:43:54 -08:00
Venkatesh Radhakrishnan
9d50afc3b9 Prefix-based iterating only shows keys in prefix
Summary:
MyRocks testing found an issue that while iterating over keys
that are outside the prefix, sometimes wrong results were seen for keys
outside the prefix. We now tighten the range of keys seen with a new
read option called prefix_seen_at_start. This remembers the starting
prefix and then compares it on a Next for equality of prefix. If they
are from a different prefix, it sets valid to false.

Test Plan: PrefixTest.PrefixValid

Reviewers: IslamAbdelRahman, sdong, yhchiang, anthony

Reviewed By: anthony

Subscribers: spetrunia, hermanlee4, yoshinorim, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D50211
2015-11-05 13:24:05 -08:00
sdong
35ad531be3 Seperate InternalIterator from Iterator
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.

This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.

Test Plan: Run all existing tests.

Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven

Reviewed By: rven

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D48549
2015-10-13 15:32:13 -07:00
Andres Noetzli
014fd55adc Support for SingleDelete()
Summary:
This patch fixes #7460559. It introduces SingleDelete as a new database
operation. This operation can be used to delete keys that were never
overwritten (no put following another put of the same key). If an overwritten
key is single deleted the behavior is undefined. Single deletion of a
non-existent key has no effect but multiple consecutive single deletions are
not allowed (see limitations).

In contrast to the conventional Delete() operation, the deletion entry is
removed along with the value when the two are lined up in a compaction. Note:
The semantics are similar to @igor's prototype that allowed to have this
behavior on the granularity of a column family (
https://reviews.facebook.net/D42093 ). This new patch, however, is more
aggressive when it comes to removing tombstones: It removes the SingleDelete
together with the value whenever there is no snapshot between them while the
older patch only did this when the sequence number of the deletion was older
than the earliest snapshot.

Most of the complex additions are in the Compaction Iterator, all other changes
should be relatively straightforward. The patch also includes basic support for
single deletions in db_stress and db_bench.

Limitations:
- Not compatible with cuckoo hash tables
- Single deletions cannot be used in combination with merges and normal
  deletions on the same key (other keys are not affected by this)
- Consecutive single deletions are currently not allowed (and older version of
  this patch supported this so it could be resurrected if needed)

Test Plan: make all check

Reviewers: yhchiang, sdong, rven, anthony, yoshinorim, igor

Reviewed By: igor

Subscribers: maykov, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D43179
2015-09-17 11:42:56 -07:00
Manuel Ung
aeb4612685 Add counters for seek/next/prev
Summary:
There are currently no statistics on seeks, only on gets. This adds the following counters:

rocksdb.number.db.seek
rocksdb.number.db.next
rocksdb.number.db.prev
(number of calls)

rocksdb.db.iterate.bytes.read
(number of bytes read from key + value using seek/next/prev)

rocksdb.number.keys.seek.found
rocksdb.number.keys.next.found
rocksdb.number.keys.prev.found
(number of calls where seek/next/prev found a value)

Test Plan:
./db_bench -statistics -benchmarks fillrandom,seekrandom -seek_nexts 5
./db_bench -statistics -benchmarks fillrandom,seekrandom -seek_nexts 5 -reverse_iterator

Reviewers: yhchiang, rven, kradhakrishnan, IslamAbdelRahman, MarkCallaghan, sdong, igor

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D46605
2015-09-11 11:37:44 -07:00
Andres Noetzli
6bdc484fd8 Added Equal method to Comparator interface
Summary:
In some cases, equality comparisons can be done more efficiently than three-way
comparisons. There are quite a few places in the code where we only care about
equality. This patch adds an Equal() method that defaults to using the
Compare() method.

Test Plan: make clean all check

Reviewers: rven, anthony, yhchiang, igor, sdong

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D46233
2015-09-08 15:30:49 -07:00
sdong
d286b5df90 DBIter to out extra keys with higher sequence numbers when changing direction from forward to backward
Summary:
When DBIter changes iterating direction from forward to backward, it might see some much larger keys with higher sequence ID. With this commit, these rows will be actively filtered out. It should fix existing disabled tests in db_iter_test.

This may not be a perfect fix, but it introduces least impact on existing codes, in order to be safe.

Test Plan:
Enable existing tests and make sure they pass. Add a new test DBIterWithMergeIterTest.InnerMergeIteratorDataRace8.
Also run all existing tests.

Reviewers: yhchiang, rven, anthony, IslamAbdelRahman, kradhakrishnan, igor

Reviewed By: igor

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D45567
2015-08-26 13:01:39 -07:00
sdong
888fbdc889 Remove the contstaint that iterator upper bound needs to be within a prefix
Summary: There is a check to fail the iterator if prefix extractor is specified but upper bound is out of the prefix for the seek key. Relax this constraint to allow users to set upper bound to the next prefix of the current one.

Test Plan: make commit-prereq

Reviewers: igor, anthony, kradhakrishnan, yhchiang, rven

Reviewed By: rven

Subscribers: tnovak, leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D44949
2015-08-19 11:03:51 -07:00
Andres Notzli
4249f159d5 Removing duplicate code in db_bench/db_stress, fixing typos
Summary:
While working on single delete support for db_bench, I realized that
db_bench/db_stress contain a bunch of duplicate code related to
copmression and found some typos. This patch removes duplicate code,
typos and a redundant #ifndef in internal_stats.cc.

Test Plan: make db_stress && make db_bench && ./db_bench --benchmarks=compress,uncompress

Reviewers: yhchiang, sdong, rven, anthony, igor

Reviewed By: igor

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D43965
2015-08-11 11:46:15 -07:00
Andres Noetzli
d7314ba759 Fixing endless loop if seeking to end of key with seq num 0
Summary:
When seeking to the last occurrence of a key with sequence number 0, db_iter
ends up in an endless loop because it seeks to type kValueTypeForSeek
which is larger than kTypeDeletion/kTypeValue. Added test case that triggers
the behavior.

Test Plan: make clean all check

Reviewers: igor, rven, anthony, yhchiang, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D43653
2015-08-06 10:43:28 -07:00
sdong
8e01bd1144 Fix misplaced position for reversing iterator direction while current key is a merge
Summary:
While doing forward iterating, if current key is merge, internal iterator position is placed to the next key. If Prev() is called now, needs to do extra Prev() to recover the location.
This is second attempt of fixing after reverting ec70fea4c4. This time shrink the fix to only merge key is the current key and avoid the reseeking logic for max_iterating skipping

Test Plan: enable the two disabled tests and make sure they pass

Reviewers: rven, IslamAbdelRahman, kradhakrishnan, tnovak, yhchiang

Reviewed By: yhchiang

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D43557
2015-08-05 11:08:50 -07:00
Yueh-Hsuan Chiang
685582a0b4 Revert two diffs related to DBIter::FindPrevUserKey()
Summary:
This diff reverts the following two previous diffs related to
DBIter::FindPrevUserKey(), which makes db_stress unstable.
We should bake a better fix for this.

* "Fix a comparison in DBIter::FindPrevUserKey()"
  ec70fea4c4.

* "Fixed endless loop in DBIter::FindPrevUserKey()"
  acee2b08a2.

Test Plan: db_stress

Reviewers: anthony, igor, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D41301
2015-07-07 11:36:24 -07:00
Tomislav Novak
ec70fea4c4 Fix a comparison in DBIter::FindPrevUserKey()
Summary:
When seek target is a merge key (`kTypeMerge`), `DBIter::FindNextUserEntry()`
advances the underlying iterator _past_ the current key (`saved_key_`); see
`MergeValuesNewToOld()`. However, `FindPrevUserKey()` assumes that `iter_`
points to an entry with the same user key as `saved_key_`. As a result,
`it->Seek(key) && it->Prev()` can cause the iterator to be positioned at the
_next_, instead of the previous, entry (new test, written by @lovro, reproduces
the bug).

This diff changes `FindPrevUserKey()` to also skip keys that are _greater_ than
`saved_key_`.

Test Plan: db_test

Reviewers: igor, sdong

Reviewed By: sdong

Subscribers: leveldb, dhruba, lovro

Differential Revision: https://reviews.facebook.net/D40791
2015-06-29 17:04:03 -07:00
Poornima Chozhiyath Raman
4fb09c6871 Updating SeekToLast with upper bound
Summary: #7124486: RocksDB's Iterator.SeekToLast should seek to the last key before iterate_upper_bound if presents

Test Plan: ./db_iter_test run successfully with the new testcase

Reviewers: rven, yhchiang, igor, anthony, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D40425
2015-06-25 09:44:30 -07:00
clark.kang
6ede020dc4 fix typos 2015-04-25 18:14:27 +09:00
Anurag Indu
3d1a924ff3 Adding stats for the merge and filter operation
Summary:
We have addded new stats and perf_context for measuring the merge and filter operation time consumption.
We have bounded all the merge operations within the GUARD statment and collected the total time for these operations in the DB.

Test Plan: WIP

Reviewers: rven, yhchiang, kradhakrishnan, igor, sdong

Reviewed By: sdong

Subscribers: dhruba

Differential Revision: https://reviews.facebook.net/D34377
2015-03-24 14:42:04 -07:00
Igor Sugak
62247ffa3b rocksdb: Add missing override
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.

Prerequisites: bear and clang 3.5 build with extra tools

```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```

Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```

Reviewers: igor, kradhakrishnan, rven, meyering, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D34077
2015-02-26 11:28:41 -08:00
Igor Sugak
62f7a1be4f rocksdb: Fixed 'Dead assignment' and 'Dead initialization' scan-build warnings
Summary:
This diff contains trivial fixes for 6 scan-build warnings:

**db/c_test.c**
`db` variable is never read. Removed assignment.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9b77d2.html#EndPath

**db/db_iter.cc**
`skipping` local variable is assigned to false. Then in the next switch block the only "non return" case assign `skipping` to true, the rest cases don't use it and all do return.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-13fca7.html#EndPath

**db/log_reader.cc**
In `bool Reader::SkipToInitialBlock()` `offset_in_block` local variable is assigned to 0 `if (offset_in_block > kBlockSize - 6)` and then never used. Removed the assignment and renamed it to `initial_offset_in_block` to avoid confusion.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-a618dd.html#EndPath

In `bool Reader::ReadRecord(Slice* record, std::string* scratch)` local variable `in_fragmented_record` in switch case `kFullType` block is assigned to false and then does `return` without use. In the other switch case `kFirstType` block the same `in_fragmented_record` is assigned to false, but later assigned to true without prior use. Removed assignment for both cases.
scan-build reprots:
http://home.fburl.com/~sugak/latest20/report-bb86b0.html#EndPath
http://home.fburl.com/~sugak/latest20/report-a975be.html#EndPath

**table/plain_table_key_coding.cc**
Local variable `user_key_size` is assigned when declared. But then in both places where it is used assigned to `static_cast<uint32_t>(key.size() - 8)`. Changed to initialize the variable to the proper value in declaration.
scan-build report:
http://home.fburl.com/~sugak/latest20/report-9e6b86.html#EndPath

**tools/db_stress.cc**
Missing `break` in switch case block. This seems to be a bug. Added missing `break`.

Test Plan:
Make sure all tests are passing and scan-build does not report 'Dead assignment' and 'Dead initialization' bugs.
```lang=bash
% make check
% make analyze
```

Reviewers: meyering, igor, kradhakrishnan, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D33795
2015-02-23 14:10:09 -08:00
Yueh-Hsuan Chiang
5f719d7202 Replace exception by setting valid_ = false in DBIter::MergeValuesNewToOld()
Summary: Replace exception by setting valid_ = false in DBIter::MergeValuesNewToOld().

Test Plan:
Not sure if I am right at this, but it seems we currently don't have a good
way to test that code path as it requires dynamically set merge_operator = nullptr
at the time while Merge() is calling.

Reviewers: igor, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D29811
2014-12-04 11:11:11 -08:00
Igor Canadi
9f20395cd6 Turn -Wshadow back on
Summary: It turns out that -Wshadow has different rules for gcc than clang. Previous commit fixed clang. This commits fixes the rest of the warnings for gcc.

Test Plan: compiles

Reviewers: ljin, yhchiang, rven, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D28131
2014-11-06 11:14:28 -08:00
Yueh-Hsuan Chiang
2b1f23dcae Apply InfoLogLevel to the logs in db/db_iter.cc
Summary: Apply InfoLogLevel to the logs in db/db_iter.cc

Test Plan: make

Reviewers: igor, ljin, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D27861
2014-10-30 16:54:34 -07:00
Danny Al-Gaaf
44cca0cd8f db/db_iter.cc: remove unused variable
Signed-off-by: Danny Al-Gaaf <danny.al-gaaf@bisect.de>
2014-10-01 10:49:08 +02:00
Lei Jin
048560a642 reduce references to cfd->options() in DBImpl
Summary:
I found it is almost impossible to get rid of this function in a single
batch. I will take a step by step approach

Test Plan: make release

Reviewers: sdong, yhchiang, igor

Reviewed By: igor

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D22995
2014-09-08 15:04:34 -07:00
Raghav Pisolkar
e0b99d4f5d created a new ReadOptions parameter 'iterate_upper_bound' 2014-09-04 11:00:16 -07:00
Torrie Fischer
6614a48418 Refactor PerfStepTimer to stop on destruct
This eliminates the need to remember to call PERF_TIMER_STOP when a section has
been timed. This allows more useful design with the perf timers and enables
possible return value optimizations. Simplistic example:

class Foo {
  public:
    Foo(int v) : m_v(v);
  private:
    int m_v;
}

Foo makeFrobbedFoo(int *errno)
{
  *errno = 0;
  return Foo();
}

Foo bar(int *errno)
{
  PERF_TIMER_GUARD(some_timer);

  return makeFrobbedFoo(errno);
}

int main(int argc, char[] argv)
{
  Foo f;
  int errno;

  f = bar(&errno);

  if (errno)
    return -1;
  return 0;
}

After bar() is called, perf_context.some_timer would be incremented as if
Stop(&perf_context.some_timer) was called at the end, and the compiler is still
able to produce optimizations on the return value from makeFrobbedFoo() through
to main().
2014-09-02 12:04:22 -07:00
Lei Jin
5a5953b388 Add histogram for DB_SEEK
Summary: as title

Test Plan: make release

Reviewers: sdong, yhchiang

Reviewed By: yhchiang

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D21717
2014-08-13 15:56:37 -07:00
Stanislau Hlebik
7c88249f51 Fix db_test and DBIter
Summary: Fix old issue with DBTest.Randomized with BlockBasedTableWithWholeKeyHashIndex + added printing in DBTest.Randomized.

Test Plan: make all check

Reviewers: zagfox, igor, ljin, yhchiang, sdong

Reviewed By: sdong

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D21003
2014-08-08 09:44:14 -07:00
Lei Jin
40fa8a4cd5 make statistics forward-able
Summary:
Make StatisticsImpl being able to forward stats to provided statistics
implementation. The main purpose is to allow us to collect internal
stats in the future even when user supplies custom statistics
implementation. It avoids intrumenting 2 sets of stats collection code.
One immediate use case is tuning advisor, which needs to collect some
internal stats, users may not be interested.

Test Plan:
ran db_bench and see stats show up at the end of run
Will run make all check since some tests rely on statistics

Reviewers: yhchiang, sdong, igor

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D20145
2014-07-28 12:05:36 -07:00
Stanislau Hlebik
d916593ead Add Prev() for merge operator
Summary: Implement Prev() with merge operator for DBIterator. Request from mongoDB. Task 4673663.

Test Plan: make all check

Reviewers: sdong

Reviewed By: sdong

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D19743
2014-07-15 16:10:18 -07:00
Igor Canadi
fd27001072 Fix compile errors on Mac
Summary: https://phabricator.fb.com/P11372644

Test Plan: compiles

Reviewers: sdong, ljin

Reviewed By: ljin

Subscribers: leveldb

Differential Revision: https://reviews.facebook.net/D18873
2014-06-03 12:28:58 -07:00
sdong
df9069d23f In DB::NewIterator(), try to allocate the whole iterator tree in an arena
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.

Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.

Test Plan: make all check

Reviewers: ljin, haobo

Reviewed By: haobo

Subscribers: leveldb, dhruba, yhchiang, igor

Differential Revision: https://reviews.facebook.net/D18513
2014-06-02 17:44:57 -07:00
Lei Jin
388d2054c7 forward iterator
Summary:
Forward iterator puts everything together in a flat structure instead of
a hierarchy of nested iterators. this should simplify the code and
provide better performance. It also enables more optimization since all
information are accessiable in one place.
Init evaluation shows about 6% improvement

Test Plan: db_test and db_bench

Reviewers: dhruba, igor, tnovak, sdong, haobo

Reviewed By: haobo

Subscribers: sdong, leveldb

Differential Revision: https://reviews.facebook.net/D18795
2014-05-30 14:31:55 -07:00
sdong
acd17fd002 Remove unused variable in DBIter
Summary: as title

Test Plan: Still compile

Reviewers: haobo, igor, yhchiang

Reviewed By: igor

CC: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D18603
2014-05-09 13:20:35 -07:00
Lei Jin
82b37a18bd thread local for tailing iterator
Summary:
replace the super version acquisision in tailing itrator with thread
local

Test Plan: will post results

Reviewers: igor, haobo, sdong, yhchiang, dhruba

Reviewed By: igor

CC: leveldb

Differential Revision: https://reviews.facebook.net/D17757
2014-04-14 10:48:01 -07:00
Lei Jin
92c1eb0291 macros for perf_context
Summary: This will allow us to disable them completely for iOS or for better performance

Test Plan: will run make all check

Reviewers: igor, haobo, dhruba

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D17511
2014-04-08 10:58:07 -07:00
sdong
5e2db3b434 PlainTableIterator not to store copied key in std::string
Summary:
Move PlainTableIterator's copied key from std::string local buffer to avoid paying the extra costs in std::string related to sharing. Reuse the same buffer class in DbIter. Move the class to dbformat.h.

This patch improves iterator performance significantly. Running this benchmark:

./table_reader_bench --num_keys2=17 --iterator --plain_table --time_unit=nanosecond

The average latency is improved to about 750 nanoseconds from 1100 nanoseconds.

Test Plan:
Add a unit test.
make all check

Reviewers: haobo, ljin

Reviewed By: haobo

CC: igor, yhchiang, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D17547
2014-04-07 19:06:09 -07:00
sdong
e0a87c4cf1 DBIter to use static allocated char array for saved_key_ (if it is not too long)
Summary: DBIter now uses a std::string for saved_key. Based on some profiling, it could be more expensive than we though. Optimize it with the same technique as LookupKey -- if it is short, we copy it to a static allocated char. Otherwise, dynamically allocate memory for it.

Test Plan: make all check

Reviewers: haobo, ljin

Reviewed By: haobo

CC: dhruba, igor, yhchiang, leveldb

Differential Revision: https://reviews.facebook.net/D17289
2014-04-01 16:43:11 -07:00
Yueh-Hsuan Chiang
cda4006e87 Enhance partial merge to support multiple arguments
Summary:
* PartialMerge api now takes a list of operands instead of two operands.
* Add min_pertial_merge_operands to Options, indicating the minimum
  number of operands to trigger partial merge.
* This diff is based on Schalk's previous diff (D14601), but it also
  includes necessary changes such as updating the pure C api for
  partial merge.

Test Plan:
* make check all
* develop tests for cases where partial merge takes more than two
  operands.

TODOs (from Schalk):
* Add test with min_partial_merge_operands > 2.
* Perform benchmarks to measure the performance improvements (can probably
  use results of task #2837810.)
* Add description of problem to doc/index.html.
* Change wiki pages to reflect the interface changes.

Reviewers: haobo, igor, vamsi

Reviewed By: haobo

CC: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D16815
2014-03-24 17:57:13 -07:00
sdong
c61c9830d4 Fix a bug that Prev() can hang.
Summary: Prev() now can hang when there is a key with more than max_skipped number of appearance internally but all of them are newer than the sequence ID to seek. Add unit tests to confirm the bug and fix it.

Test Plan: make all check

Reviewers: igor, haobo

Reviewed By: igor

CC: ljin, yhchiang, leveldb

Differential Revision: https://reviews.facebook.net/D16899
2014-03-17 10:00:41 -07:00
Siying Dong
d169b67680 [Performance Branch] PlainTable to encode rows with seqID 0, value type using 1 internal byte.
Summary: In PlainTable, use one single byte to represent 8 bytes of internal bytes, if seqID = 0 and it is value type (which should be common for bottom most files). It is to save 7 bytes for uncompressed cases.

Test Plan: make all check

Reviewers: haobo, dhruba, kailiu

Reviewed By: haobo

CC: igor, leveldb

Differential Revision: https://reviews.facebook.net/D15489
2014-02-03 12:19:30 -08:00
kailiu
551e9428ce Merge branch 'master' into performance 2013-12-06 14:15:42 -08:00
Igor Canadi
043fc14c3e Get rid of some shared_ptrs
Summary:
I went through all remaining shared_ptrs and removed the ones that I found not-necessary. Only GenerateCachePrefix() is called fairly often, so don't expect much perf wins.

The ones that are left are accessed infrequently and I think we're fine with keeping them.

Test Plan: make asan_check

Reviewers: dhruba, haobo

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D14427
2013-12-03 11:17:58 -08:00
Kai Liu
1966b63137 Merge branch 'master' into perf 2013-11-27 11:47:40 -08:00
Haobo Xu
5b825d6964 [RocksDB] Use raw pointer instead of shared pointer when passing Statistics object internally
Summary: liveness of the statistics object is already ensured by the shared pointer in DB options. There's no reason to pass again shared pointer among internal functions. Raw pointer is sufficient and efficient.

Test Plan: make check

Reviewers: dhruba, MarkCallaghan, igor

Reviewed By: dhruba

CC: leveldb, reconnect.grayhat

Differential Revision: https://reviews.facebook.net/D14289
2013-11-25 10:38:15 -08:00
Siying Dong
3e35aa6412 Revert "Allow users to profile a query and see bottleneck of the query"
This reverts commit 3d8ac31d71.
2013-11-21 17:40:39 -08:00
Siying Dong
b135d01e7b Allow users to profile a query and see bottleneck of the query
Summary:
Provide a framework to profile a query in detail to figure out latency bottleneck. Currently, in Get(), Put() and iterators, 2-3 simple timing is used. We can easily add more profile counters to the framework later.

Test Plan: Enable this profiling in seveal existing tests.

Reviewers: haobo, dhruba, kailiu, emayanke, vamsi, igor

CC: leveldb

Differential Revision: https://reviews.facebook.net/D14001

Conflicts:
	table/merger.cc
2013-11-21 17:39:19 -08:00
Siying Dong
3d8ac31d71 Allow users to profile a query and see bottleneck of the query
Summary:
Provide a framework to profile a query in detail to figure out latency bottleneck. Currently, in Get(), Put() and iterators, 2-3 simple timing is used. We can easily add more profile counters to the framework later.

Test Plan: Enable this profiling in seveal existing tests.

Reviewers: haobo, dhruba, kailiu, emayanke, vamsi, igor

CC: leveldb

Differential Revision: https://reviews.facebook.net/D14001
2013-11-21 16:29:57 -08:00
Siying Dong
071fb0d77b Inline a couple of functions and put one save lazily clearing
Summary:
Machine several functions inline.
Also, in DBIter.Seek() make value cleaning up lazily done.
These are for the use case that Seek() are called lots of times but few return values.

Test Plan: make all check

Differential Revision: https://reviews.facebook.net/D14217
2013-11-20 17:32:57 -08:00
Siying Dong
65428b0c0a Fix Bug: iterator.Prev() or iterator.SeekToLast() might return the first element instead of the correct one
Summary:
Recent patch https://reviews.facebook.net/D11865 introduced a regression bug:

DBIter::FindPrevUserEntry(), which is called by DBIter::Prev() (and also implicitly if calling iterator.SeekToLast())  might do issue a seek when having skipped too many entries. If the skipped entry just before the seek() is a delete, the saved key is erased so that it seeks to the front, so Prev() would return the first element.

This patch fixes the bug by not doing seek() in DBIter::FindNextUserEntry() if saved key has been erased.

Test Plan: Add a test DBTest.IterPrevMaxSkip which would fail without the patch and would pass with the change.

Reviewers: dhruba, xjin, haobo

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13557
2013-10-17 18:33:18 -07:00
Dhruba Borthakur
9cd221094c Add appropriate LICENSE and Copyright message.
Summary:
Add appropriate LICENSE and Copyright message.

Test Plan:
make check

Reviewers:

CC:

Task ID: #

Blame Rev:
2013-10-16 17:48:41 -07:00
Dhruba Borthakur
a143ef9b38 Change namespace from leveldb to rocksdb
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.

Test Plan: compile rocksdb

Reviewers: emayanke

Reviewed By: emayanke

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13287
2013-10-04 11:59:26 -07:00
Haobo Xu
71046971f0 [RocksDB] Added perf counters to track skipped internal keys during iteration
Summary: as title. unit test not polished. this is for a quick live test

Test Plan: live

Reviewers: dhruba

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13221
2013-10-02 10:48:41 -07:00
Dhruba Borthakur
197034e4c3 An iterator may automatically invoke reseeks.
Summary:
An iterator invokes reseek if the number of sequential skips over the
same userkey exceeds a configured number. This makes iter->Next()
faster (bacause of fewer key compares) if a large number of
adjacent internal keys in a table (sst or memtable) have the
same userkey.

Test Plan: Unit test DBTest.IterReseek.

Reviewers: emayanke, haobo, xjin

Reviewed By: xjin

CC: leveldb, xjin

Differential Revision: https://reviews.facebook.net/D11865
2013-09-06 11:50:53 -07:00
Dhruba Borthakur
1186192ed1 Replace include/leveldb with include/rocksdb.
Summary: Replace include/leveldb with include/rocksdb.

Test Plan:
make clean; make check
make clean; make release

Differential Revision: https://reviews.facebook.net/D12489
2013-08-23 10:51:00 -07:00
Deon Nicholas
b87dcae1a3 Made merge_oprator a shared_ptr; and added TTL unit tests
Test Plan:
- make all check;
- make release;
- make stringappend_test; ./stringappend_test

Reviewers: haobo, emayanke

Reviewed By: haobo

CC: leveldb, kailiu

Differential Revision: https://reviews.facebook.net/D12381
2013-08-20 13:35:28 -07:00
Deon Nicholas
e1346968d8 Merge operator fixes part 1.
Summary:
-Added null checks and revisions to DBIter::MergeValuesNewToOld()
-Added DBIter test to stringappend_test
-Major fix with Merge and TTL
More plans for fixes later.

Test Plan:
-make clean; make stringappend_test -j 32; ./stringappend_test
-make all check;

Reviewers: haobo, emayanke, vamsi, dhruba

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D12315
2013-08-19 11:42:47 -07:00
Jim Paton
0307c5fe3a Implement log blobs
Summary:
This patch adds the ability for the user to add sequences of arbitrary data (blobs) to write batches. These blobs are saved to the log along with everything else in the write batch. You can add multiple blobs per WriteBatch and the ordering of blobs, puts, merges, and deletes are preserved.

Blobs are not saves to SST files. RocksDB ignores blobs in every way except for writing them to the log.

Before committing this patch, I need to add some test code. But I'm submitting it now so people can comment on the API.

Test Plan: make -j32 check

Reviewers: dhruba, haobo, vamsi

Reviewed By: dhruba

CC: leveldb

Differential Revision: https://reviews.facebook.net/D12195
2013-08-14 16:32:46 -07:00
Deon Nicholas
c2d7826ced [RocksDB] [MergeOperator] The new Merge Interface! Uses merge sequences.
Summary:
Here are the major changes to the Merge Interface. It has been expanded
to handle cases where the MergeOperator is not associative. It does so by stacking
up merge operations while scanning through the key history (i.e.: during Get() or
Compaction), until a valid Put/Delete/end-of-history is encountered; it then
applies all of the merge operations in the correct sequence starting with the
base/sentinel value.

I have also introduced an "AssociativeMerge" function which allows the user to
take advantage of associative merge operations (such as in the case of counters).
The implementation will always attempt to merge the operations/operands themselves
together when they are encountered, and will resort to the "stacking" method if
and only if the "associative-merge" fails.

This implementation is conjectured to allow MergeOperator to handle the general
case, while still providing the user with the ability to take advantage of certain
efficiencies in their own merge-operator / data-structure.

NOTE: This is a preliminary diff. This must still go through a lot of review,
revision, and testing. Feedback welcome!

Test Plan:
  -This is a preliminary diff. I have only just begun testing/debugging it.
  -I will be testing this with the existing MergeOperator use-cases and unit-tests
(counters, string-append, and redis-lists)
  -I will be "desk-checking" and walking through the code with the help gdb.
  -I will find a way of stress-testing the new interface / implementation using
db_bench, db_test, merge_test, and/or db_stress.
  -I will ensure that my tests cover all cases: Get-Memtable,
Get-Immutable-Memtable, Get-from-Disk, Iterator-Range-Scan, Flush-Memtable-to-L0,
Compaction-L0-L1, Compaction-Ln-L(n+1), Put/Delete found, Put/Delete not-found,
end-of-history, end-of-file, etc.
  -A lot of feedback from the reviewers.

Reviewers: haobo, dhruba, zshao, emayanke

Reviewed By: haobo

CC: leveldb

Differential Revision: https://reviews.facebook.net/D11499
2013-08-05 20:14:32 -07:00
Dhruba Borthakur
a8d807ee91 Record the number of open db iterators.
Summary: Enhance the statitics to report the number of open db iterators.

Test Plan: make check

Reviewers: haobo, emayanke

Reviewed By: emayanke

CC: leveldb

Differential Revision: https://reviews.facebook.net/D10983
2013-05-29 08:47:08 -07:00
Haobo Xu
05e8854085 [Rocksdb] Support Merge operation in rocksdb
Summary:
This diff introduces a new Merge operation into rocksdb.
The purpose of this review is mostly getting feedback from the team (everyone please) on the design.

Please focus on the four files under include/leveldb/, as they spell the client visible interface change.
include/leveldb/db.h
include/leveldb/merge_operator.h
include/leveldb/options.h
include/leveldb/write_batch.h

Please go over local/my_test.cc carefully, as it is a concerete use case.

Please also review the impelmentation files to see if the straw man implementation makes sense.

Note that, the diff does pass all make check and truly supports forward iterator over db and a version
of Get that's based on iterator.

Future work:
- Integration with compaction
- A raw Get implementation

I am working on a wiki that explains the design and implementation choices, but coding comes
just naturally and I think it might be a good idea to share the code earlier. The code is
heavily commented.

Test Plan: run all local tests

Reviewers: dhruba, heyongqiang

Reviewed By: dhruba

CC: leveldb, zshao, sheki, emayanke, MarkCallaghan

Differential Revision: https://reviews.facebook.net/D9651
2013-05-03 16:59:02 -07:00
Hans Wennborg
36a5f8ed7f A number of fixes:
- Replace raw slice comparison with a call to user comparator.
  Added test for custom comparators.

- Fix end of namespace comments.

- Fixed bug in picking inputs for a level-0 compaction.

  When finding overlapping files, the covered range may expand
  as files are added to the input set.  We now correctly expand
  the range when this happens instead of continuing to use the
  old range.  For example, suppose L0 contains files with the
  following ranges:

      F1: a .. d
      F2:    c .. g
      F3:       f .. j

  and the initial compaction target is F3.  We used to search
  for range f..j which yielded {F2,F3}.  However we now expand
  the range as soon as another file is added.  In this case,
  when F2 is added, we expand the range to c..j and restart the
  search.  That picks up file F1 as well.

  This change fixes a bug related to deleted keys showing up
  incorrectly after a compaction as described in Issue 44.

(Sync with upstream @25072954)
2011-10-31 17:22:06 +00:00
gabor@google.com
ab323f7e1e Bugfixes for iterator and documentation.
- Fix bug in Iterator::Prev where it would return the wrong key.
  Fixes issues 29 and 30.

- Added a tweak to testharness to allow running just some tests.

- Fixing two minor documentation errors based on issues 28 and 25.

- Cleanup; fix namespaces of export-to-C code.
  Also fix one "const char*" vs "char*" mismatch.



git-svn-id: https://leveldb.googlecode.com/svn/trunk@48 62dab493-f737-651d-591e-8d6aee1b9529
2011-08-16 01:21:01 +00:00
dgrogan@chromium.org
ba6dac0e80 @20776309
* env_chromium.cc should not export symbols.
* Fix MSVC warnings.
* Removed large value support.
* Fix broken reference to documentation file

git-svn-id: https://leveldb.googlecode.com/svn/trunk@24 62dab493-f737-651d-591e-8d6aee1b9529
2011-04-20 22:48:11 +00:00
dgrogan@chromium.org
69c6d38342 reverting disastrous MOE commit, returning to r21
git-svn-id: https://leveldb.googlecode.com/svn/trunk@23 62dab493-f737-651d-591e-8d6aee1b9529
2011-04-19 23:11:15 +00:00
dgrogan@chromium.org
b743906eea Revision created by MOE tool push_codebase.
MOE_MIGRATION=


git-svn-id: https://leveldb.googlecode.com/svn/trunk@22 62dab493-f737-651d-591e-8d6aee1b9529
2011-04-19 23:01:25 +00:00
dgrogan@chromium.org
b409afe968 chmod a-x
git-svn-id: https://leveldb.googlecode.com/svn/trunk@21 62dab493-f737-651d-591e-8d6aee1b9529
2011-04-18 23:15:58 +00:00
dgrogan@chromium.org
f779e7a5d8 @20602303. Default file permission is now 755.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@20 62dab493-f737-651d-591e-8d6aee1b9529
2011-04-12 19:38:58 +00:00
jorlow@chromium.org
4671a695fc Move include files into a leveldb subdir.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@18 62dab493-f737-651d-591e-8d6aee1b9529
2011-03-30 18:35:40 +00:00
jorlow@chromium.org
e2da744e12 Upstream changes.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@16 62dab493-f737-651d-591e-8d6aee1b9529
2011-03-28 20:43:44 +00:00
jorlow@chromium.org
e11bdf1935 Upstream changes
git-svn-id: https://leveldb.googlecode.com/svn/trunk@15 62dab493-f737-651d-591e-8d6aee1b9529
2011-03-25 20:27:43 +00:00
jorlow@chromium.org
8303bb1b33 Pull from upstream.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@14 62dab493-f737-651d-591e-8d6aee1b9529
2011-03-22 23:24:02 +00:00