Commit Graph

39 Commits

Author SHA1 Message Date
sdong
fdf882ded2 Replace namespace name "rocksdb" with ROCKSDB_NAMESPACE (#6433)
Summary:
When dynamically linking two binaries together, different builds of RocksDB from two sources might cause errors. To provide a tool for user to solve the problem, the RocksDB namespace is changed to a flag which can be overridden in build time.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6433

Test Plan: Build release, all and jtest. Try to build with ROCKSDB_NAMESPACE with another flag.

Differential Revision: D19977691

fbshipit-source-id: aa7f2d0972e1c31d75339ac48478f34f6cfcfb3e
2020-02-20 12:09:57 -08:00
Mike Kolupaev
b4d7209428 Add an option to put first key of each sst block in the index (#5289)
Summary:
The first key is used to defer reading the data block until this file gets to the top of merging iterator's heap. For short range scans, most files never make it to the top of the heap, so this change can reduce read amplification by a lot sometimes.

Consider the following workload. There are a few data streams (we'll be calling them "logs"), each stream consisting of a sequence of blobs (we'll be calling them "records"). Each record is identified by log ID and a sequence number within the log. RocksDB key is concatenation of log ID and sequence number (big endian). Reads are mostly relatively short range scans, each within a single log. Writes are mostly sequential for each log, but writes to different logs are randomly interleaved. Compactions are disabled; instead, when we accumulate a few tens of sst files, we create a new column family and start writing to it.

So, a typical sst file consists of a few ranges of blocks, each range corresponding to one log ID (we use FlushBlockPolicy to cut blocks at log boundaries). A typical read would go like this. First, iterator Seek() reads one block from each sst file. Then a series of Next()s move through one sst file (since writes to each log are mostly sequential) until the subiterator reaches the end of this log in this sst file; then Next() switches to the next sst file and reads sequentially from that, and so on. Often a range scan will only return records from a small number of blocks in small number of sst files; in this case, the cost of initial Seek() reading one block from each file may be bigger than the cost of reading the actually useful blocks.

Neither iterate_upper_bound nor bloom filters can prevent reading one block from each file in Seek(). But this PR can: if the index contains first key from each block, we don't have to read the block until this block actually makes it to the top of merging iterator's heap, so for short range scans we won't read any blocks from most of the sst files.

This PR does the deferred block loading inside value() call. This is not ideal: there's no good way to report an IO error from inside value(). As discussed with siying offline, it would probably be better to change InternalIterator's interface to explicitly fetch deferred value and get status. I'll do it in a separate PR.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5289

Differential Revision: D15256423

Pulled By: al13n321

fbshipit-source-id: 750e4c39ce88e8d41662f701cf6275d9388ba46a
2019-06-24 20:54:04 -07:00
Siying Dong
8843129ece Move some memory related files from util/ to memory/ (#5382)
Summary:
Move arena, allocator, and memory tools under util to a separate memory/ directory.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5382

Differential Revision: D15564655

Pulled By: siying

fbshipit-source-id: 9cd6b5d0d3d52b39606e19221fa154596e5852a5
2019-05-30 17:44:09 -07:00
Yanqin Jin
d9280ff2d2 Add back NewEmptyIterator (#5203)
Summary:
#4905 removed the implementation of `NewEmptyIterator` but kept its
declaration in the public header. This breaks some systems that depend on
RocksDB if the systems use `NewEmptyIterator`. Therefore, add it back to fix. cc maysamyabandeh please remind me if I miss anything here. Thanks
Pull Request resolved: https://github.com/facebook/rocksdb/pull/5203

Differential Revision: D14968382

Pulled By: riversand963

fbshipit-source-id: 5fb86e99c8cfaf9f7a9473cdb1355d7558ff6e01
2019-04-16 20:28:05 -07:00
Remington Brasga
127a850beb Fix arena allocation size in NewEmptyInternalIterator (#4905)
Summary:
NewEmptyInternalIterator with arena mistakenly used EmptyIterator to allocate the size from area but then initialized it to a totally different object: EmptyInternalIterator. The patch fixes that.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4905

Differential Revision: D14689840

Pulled By: maysamyabandeh

fbshipit-source-id: af64fd8ee93d5a4ad54691c792e5ecc5efabc887
2019-03-29 15:09:35 -07:00
Michael Liu
ca89ac2ba9 Apply modernize-use-override (2nd iteration)
Summary:
Use C++11’s override and remove virtual where applicable.
Change are automatically generated.

Reviewed By: Orvid

Differential Revision: D14090024

fbshipit-source-id: 1e9432e87d2657e1ff0028e15370a85d1739ba2a
2019-02-14 14:41:36 -08:00
jsteemann
517d3b8b77 fix typo in error message, twice (#4457)
Summary:
Fixes a typo in error messages returned by Iterator::GetProperty(...)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4457

Differential Revision: D10281965

Pulled By: sagar0

fbshipit-source-id: 1cd3c665f467ef06cdfd9f482692e6f8568f3d22
2018-10-09 17:07:27 -07:00
Maysam Yabandeh
caf0f53a74 Index value delta encoding (#3983)
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the  block cache more efficiently. The feature is enabled with using format_version 4.

The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585   rocksdb read-only range=100
Format 3:
19569   rocksdb read-only range=100
Format 4:
19352   rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983

Differential Revision: D8361343

Pulled By: maysamyabandeh

fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
2018-08-09 16:58:40 -07:00
Andrew Kryczka
5d68243e61 Comment out unused variables
Summary:
Submitting on behalf of another employee.
Closes https://github.com/facebook/rocksdb/pull/3557

Differential Revision: D7146025

Pulled By: ajkr

fbshipit-source-id: 495ca5db5beec3789e671e26f78170957704e77e
2018-03-05 13:13:41 -08:00
Igor Sugak
aba3409740 Back out "[codemod] - comment out unused parameters"
Reviewed By: igorsugak

fbshipit-source-id: 4a93675cc1931089ddd574cacdb15d228b1e5f37
2018-02-22 12:43:17 -08:00
David Lai
f4a030ce81 - comment out unused parameters
Reviewed By: everiq, igorsugak

Differential Revision: D7046710

fbshipit-source-id: 8e10b1f1e2aecebbfb229c742e214db887e5a461
2018-02-22 09:44:23 -08:00
Yi Wu
31d3e41810 PinnableSlice move assignment
Summary:
Allow `std::move(pinnable_slice)`.
Closes https://github.com/facebook/rocksdb/pull/2997

Differential Revision: D6036782

Pulled By: yiwu-arbug

fbshipit-source-id: 583fb0419a97e437ff530f4305822341cd3381fa
2017-10-12 18:28:24 -07:00
Sagar Vemuri
72502cf227 Revert "comment out unused parameters"
Summary:
This reverts the previous commit 1d7048c598, which broke the build.

Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627

Differential Revision: D5476473

Pulled By: sagar0

fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
2017-07-21 18:26:26 -07:00
Victor Gao
1d7048c598 comment out unused parameters
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.

Reviewed By: igorsugak

Differential Revision: D5454343

fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
2017-07-21 14:57:44 -07:00
Siying Dong
3c327ac2d0 Change RocksDB License
Summary: Closes https://github.com/facebook/rocksdb/pull/2589

Differential Revision: D5431502

Pulled By: siying

fbshipit-source-id: 8ebf8c87883daa9daa54b2303d11ce01ab1f6f75
2017-07-15 16:11:23 -07:00
Siying Dong
d616ebea23 Add GPLv2 as an alternative license.
Summary: Closes https://github.com/facebook/rocksdb/pull/2226

Differential Revision: D4967547

Pulled By: siying

fbshipit-source-id: dd3b58ae1e7a106ab6bb6f37ab5c88575b125ab4
2017-04-27 18:06:12 -07:00
Maysam Yabandeh
11526252cc Pinnableslice (2nd attempt)
Summary:
PinnableSlice

    Summary:
    Currently the point lookup values are copied to a string provided by the
    user. This incures an extra memcpy cost. This patch allows doing point lookup
    via a PinnableSlice which pins the source memory location (instead of
    copying their content) and releases them after the content is consumed
    by the user. The old API of Get(string) is translated to the new API
    underneath.

    Here is the summary for improvements:

    value 100 byte: 1.8% regular, 1.2% merge values
    value 1k byte: 11.5% regular, 7.5% merge values
    value 10k byte: 26% regular, 29.9% merge values
    The improvement for merge could be more if we extend this approach to
    pin the merge output and delay the full merge operation until the user
    actually needs it. We have put that for future work.

    PS:
    Sometimes we observe a small decrease in performance when switching from
    t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756

Differential Revision: D4391738

Pulled By: maysamyabandeh

fbshipit-source-id: 6f3edd3
2017-03-13 11:54:10 -07:00
Maysam Yabandeh
d0ba8ec8f9 Revert "PinnableSlice"
Summary:
This reverts commit 54d94e9c2c.

The pull request was landed by mistake.
Closes https://github.com/facebook/rocksdb/pull/1755

Differential Revision: D4391678

Pulled By: maysamyabandeh

fbshipit-source-id: 36d5149
2017-01-08 14:24:12 -08:00
Maysam Yabandeh
54d94e9c2c PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.

 Here is the summary for improvements:
 1. value 100 byte: 1.8%  regular, 1.2% merge values
 2. value 1k   byte: 11.5% regular, 7.5% merge values
 3. value 10k byte: 26% regular,    29.9% merge values

 The improvement for merge could be more if we extend this approach to
 pin the merge output and delay the full merge operation until the user
 actually needs it. We have put that for future work.

PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732

Differential Revision: D4374613

Pulled By: maysamyabandeh

fbshipit-source-id: a077f1a
2017-01-08 13:54:13 -08:00
Maysam Yabandeh
0712d541d1 Delegate Cleanables
Summary:
Cleanable objects will perform the registered cleanups when
they are destructed. We however rather to delay this cleaning like when
we are gathering the merge operands. Current approach is to create the
Cleanable object on heap (instead of on stack) and delay deleting it.

By allowing Cleanables to delegate their cleanups to another cleanable
object we can delay the cleaning without however the need to craete the
cleanable object on heap and keeping it around. This patch applies this
technique for the cleanups of BlockIter and shows improved performance
for some in-memory benchmarks:
+1.8% for merge worklaod, +6.4% for non-merge workload when the merge
operator is specified.
https://our.intern.facebook.com/intern/tasks?t=15168163

Non-merge benchmark:
TEST_TMPDIR=/dev/shm/v100nocomp/ ./db_bench --benchmarks=fillrandom
--num=1000000 -value_size=100 -compression_type=none

Reading random with no merge operator specified:
TEST_TMPDIR=/dev/shm/v100nocomp/ ./db_bench
--benchmarks="read
Closes https://github.com/facebook/rocksdb/pull/1711

Differential Revision: D4361163

Pulled By: maysamyabandeh

fbshipit-source-id: 9801e07
2016-12-29 15:54:19 -08:00
Aaron Gao
f517d9dd09 Add SeekForPrev() to Iterator
Summary:
Add new Iterator API, `SeekForPrev`: find the last key that <= target key
support prefix_extractor
support prefix_same_as_start
support upper_bound
not supported in iterators without Prev()

Also add tests in db_iter_test and db_iterator_test

Pass all tests
Cheers!

Test Plan: make all check -j64

Reviewers: andrewkr, yiwu, IslamAbdelRahman, sdong

Reviewed By: sdong

Subscribers: andrewkr, dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D64149
2016-09-27 18:20:57 -07:00
sdong
74b660702e Rename iterator property "rocksdb.iterator.is.key.pinned" => "rocksdb.iterator.is-key-pinned"
Summary: Rename iterator property to folow property naming convention.

Test Plan: Run all existing tests.

Reviewers: andrewkr, anthony, yhchiang, kradhakrishnan, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D54957
2016-03-01 13:47:12 -08:00
sdong
1f5954147b Introduce Iterator::GetProperty() and replace Iterator::IsKeyPinned()
Summary:
Add Iterator::GetProperty(), a way for users to communicate with iterator, and turn Iterator::IsKeyPinned() with it.
As a follow-up, I'll ask a property as the version number attached to the iterator

Test Plan: Rerun existing tests and add a negative test case.

Reviewers: yhchiang, andrewkr, kradhakrishnan, anthony, IslamAbdelRahman

Reviewed By: IslamAbdelRahman

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D54783
2016-02-29 14:01:31 -08:00
Baraa Hamodi
21e95811d1 Updated all copyright headers to the new format. 2016-02-09 15:12:00 -08:00
sdong
35ad531be3 Seperate InternalIterator from Iterator
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.

This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.

Test Plan: Run all existing tests.

Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven

Reviewed By: rven

Subscribers: leveldb, dhruba

Differential Revision: https://reviews.facebook.net/D48549
2015-10-13 15:32:13 -07:00
Igor Sugak
62247ffa3b rocksdb: Add missing override
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.

Prerequisites: bear and clang 3.5 build with extra tools

```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```

Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```

Reviewers: igor, kradhakrishnan, rven, meyering, sdong

Reviewed By: sdong

Subscribers: dhruba, leveldb

Differential Revision: https://reviews.facebook.net/D34077
2015-02-26 11:28:41 -08:00
sdong
df9069d23f In DB::NewIterator(), try to allocate the whole iterator tree in an arena
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.

Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.

Test Plan: make all check

Reviewers: ljin, haobo

Reviewed By: haobo

Subscribers: leveldb, dhruba, yhchiang, igor

Differential Revision: https://reviews.facebook.net/D18513
2014-06-02 17:44:57 -07:00
Dhruba Borthakur
9cd221094c Add appropriate LICENSE and Copyright message.
Summary:
Add appropriate LICENSE and Copyright message.

Test Plan:
make check

Reviewers:

CC:

Task ID: #

Blame Rev:
2013-10-16 17:48:41 -07:00
Dhruba Borthakur
a143ef9b38 Change namespace from leveldb to rocksdb
Summary:
Change namespace from leveldb to rocksdb. This allows a single
application to link in open-source leveldb code as well as
rocksdb code into the same process.

Test Plan: compile rocksdb

Reviewers: emayanke

Reviewed By: emayanke

CC: leveldb

Differential Revision: https://reviews.facebook.net/D13287
2013-10-04 11:59:26 -07:00
Dhruba Borthakur
1186192ed1 Replace include/leveldb with include/rocksdb.
Summary: Replace include/leveldb with include/rocksdb.

Test Plan:
make clean; make check
make clean; make release

Differential Revision: https://reviews.facebook.net/D12489
2013-08-23 10:51:00 -07:00
Abhishek Kona
c41f1e995c Codemod NULL to nullptr
Summary:
scripted NULL to nullptr in
* include/leveldb/
* db/
* table/
* util/

Test Plan: make all check

Reviewers: dhruba, emayanke

Reviewed By: emayanke

CC: leveldb

Differential Revision: https://reviews.facebook.net/D9003
2013-02-28 18:04:58 -08:00
Hans Wennborg
36a5f8ed7f A number of fixes:
- Replace raw slice comparison with a call to user comparator.
  Added test for custom comparators.

- Fix end of namespace comments.

- Fixed bug in picking inputs for a level-0 compaction.

  When finding overlapping files, the covered range may expand
  as files are added to the input set.  We now correctly expand
  the range when this happens instead of continuing to use the
  old range.  For example, suppose L0 contains files with the
  following ranges:

      F1: a .. d
      F2:    c .. g
      F3:       f .. j

  and the initial compaction target is F3.  We used to search
  for range f..j which yielded {F2,F3}.  However we now expand
  the range as soon as another file is added.  In this case,
  when F2 is added, we expand the range to c..j and restart the
  search.  That picks up file F1 as well.

  This change fixes a bug related to deleted keys showing up
  incorrectly after a compaction as described in Issue 44.

(Sync with upstream @25072954)
2011-10-31 17:22:06 +00:00
dgrogan@chromium.org
740d8b3d00 Update from upstream @21551990
* Patch LevelDB to build for OSX and iOS
* Fix race condition in memtable iterator deletion.
* Other small fixes.

git-svn-id: https://leveldb.googlecode.com/svn/trunk@29 62dab493-f737-651d-591e-8d6aee1b9529
2011-05-28 00:53:58 +00:00
dgrogan@chromium.org
69c6d38342 reverting disastrous MOE commit, returning to r21
git-svn-id: https://leveldb.googlecode.com/svn/trunk@23 62dab493-f737-651d-591e-8d6aee1b9529
2011-04-19 23:11:15 +00:00
dgrogan@chromium.org
b743906eea Revision created by MOE tool push_codebase.
MOE_MIGRATION=


git-svn-id: https://leveldb.googlecode.com/svn/trunk@22 62dab493-f737-651d-591e-8d6aee1b9529
2011-04-19 23:01:25 +00:00
dgrogan@chromium.org
b409afe968 chmod a-x
git-svn-id: https://leveldb.googlecode.com/svn/trunk@21 62dab493-f737-651d-591e-8d6aee1b9529
2011-04-18 23:15:58 +00:00
dgrogan@chromium.org
f779e7a5d8 @20602303. Default file permission is now 755.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@20 62dab493-f737-651d-591e-8d6aee1b9529
2011-04-12 19:38:58 +00:00
jorlow@chromium.org
4671a695fc Move include files into a leveldb subdir.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@18 62dab493-f737-651d-591e-8d6aee1b9529
2011-03-30 18:35:40 +00:00
jorlow@chromium.org
f67e15e50f Initial checkin.
git-svn-id: https://leveldb.googlecode.com/svn/trunk@2 62dab493-f737-651d-591e-8d6aee1b9529
2011-03-18 22:37:00 +00:00