Summary:
The file numbers assigned post-repair were sometimes smaller than older files' numbers due to `LogAndApply` saving the wrong next file number in the manifest.
- Mark the highest file seen during repair as used before `LogAndApply` so the correct next file number will be stored.
- Renamed `MarkFileNumberUsedDuringRecovery` to `MarkFileNumberUsed` since now it's used during repair in addition to during recovery
- Added `TEST_Current_Next_FileNo` to expose the next file number for the unit test.
Closes https://github.com/facebook/rocksdb/pull/2988
Differential Revision: D6018083
Pulled By: ajkr
fbshipit-source-id: 3f25cbf74439cb8f16dd12af90b67f9f9f75e718
Summary:
On iterator create, take a snapshot, create a ReadCallback and pass the ReadCallback to the underlying DBIter to check if key is committed.
Closes https://github.com/facebook/rocksdb/pull/2981
Differential Revision: D6001471
Pulled By: yiwu-arbug
fbshipit-source-id: 3565c4cdaf25370ba47008b0e0cb65b31dfe79fe
Summary:
Update Compaction/Flush to support WritePreparedTxnDB: Add SnapshotChecker which is a proxy to query WritePreparedTxnDB::IsInSnapshot. Pass SnapshotChecker to DBImpl on WritePreparedTxnDB open. CompactionIterator use it to check if a key has been committed and if it is visible to a snapshot. In CompactionIterator:
* check if key has been committed. If not, output uncommitted keys AS-IS.
* use SnapshotChecker to check if key is visible to a snapshot when in need.
* do not output key with seq = 0 if the key is not committed.
Closes https://github.com/facebook/rocksdb/pull/2926
Differential Revision: D5902907
Pulled By: yiwu-arbug
fbshipit-source-id: 945e037fdf0aa652dc5ba0ad879461040baa0320
Summary:
Add a new function in Listener to let the caller know when rocksdb
is stalling writes.
Closes https://github.com/facebook/rocksdb/pull/2897
Differential Revision: D5860124
Pulled By: schischi
fbshipit-source-id: ee791606169aa64f772c86f817cebf02624e05e1
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).
The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().
Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886
Differential Revision: D5838431
Pulled By: yiwu-arbug
fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
Summary:
Recover txns from the WAL. Also added some unit tests.
Closes https://github.com/facebook/rocksdb/pull/2901
Differential Revision: D5859596
Pulled By: maysamyabandeh
fbshipit-source-id: 6424967b231388093b4effffe0a3b1b7ec8caeb0
Summary:
SUMMARY
Moves the bytes_per_sync and wal_bytes_per_sync options from immutableoptions to mutable options. Also if wal_bytes_per_sync is changed, the wal file and memtables are flushed.
TEST PLAN
ran make check
all passed
Two new tests SetBytesPerSync, SetWalBytesPerSync check that after issuing setoptions with a new value for the var, the db options have the new value.
Closes https://github.com/facebook/rocksdb/pull/2893
Reviewed By: yiwu-arbug
Differential Revision: D5845814
Pulled By: TheRushingWookie
fbshipit-source-id: 93b52d779ce623691b546679dcd984a06d2ad1bd
Summary:
By default the seq number in DB is increased once per written key. WritePrepared txns requires the seq to be increased once per the entire batch so that the seq would be used as the prepare timestamp by which the transaction is identified. Also we need to increase seq for the commit marker since it would give a unique id to the commit timestamp of transactions.
Two unit tests are added to verify our understanding of how the seq should be increased. The recovery path requires much more work and is left to another patch.
Closes https://github.com/facebook/rocksdb/pull/2885
Differential Revision: D5837843
Pulled By: maysamyabandeh
fbshipit-source-id: a08960b93d727e1cf438c254d0c2636fb133cc1c
Summary:
This patch instruments the read path to verify each read value against an optional ReadCallback class. If the value is rejected, the reader moves on to the next value. The WritePreparedTxn makes use of this feature to skip sequence numbers that are not in the read snapshot.
Closes https://github.com/facebook/rocksdb/pull/2850
Differential Revision: D5787375
Pulled By: maysamyabandeh
fbshipit-source-id: 49d808b3062ab35e7ae98ad388f659757794184c
Summary:
This branch extends existing property map which keeps values in doubles to keep values in strings so that it can be used to provide wider range of properties. The immediate need for that is to provide IO stall stats in an easy parseable way to MyRocks which is also part of this branch.
Closes https://github.com/facebook/rocksdb/pull/2794
Differential Revision: D5717676
Pulled By: Tema
fbshipit-source-id: e34ba5b79ba774697f7b97ce1138d8fd55471b8a
Summary:
Implement the main body of WritePrepared pseudo code. This includes PrepareInternal and CommitInternal, as well as AddCommitted which updates the commit map. It also provides a IsInSnapshot method that could be later called form the read path to decide if a version is in the read snapshot or it should other be skipped.
This patch lacks unit tests and does not attempt to offer an efficient implementation. The idea is that to have the API specified so that we can work on related tasks in parallel.
Closes https://github.com/facebook/rocksdb/pull/2713
Differential Revision: D5640021
Pulled By: maysamyabandeh
fbshipit-source-id: bfa7a05e8d8498811fab714ce4b9c21530514e1c
Summary:
We need a tool to check any sst file corruption in the db.
It will check all the sst files in current version and read all the blocks (data, meta, index) with checksum verification. If any verification fails, the function will return non-OK status.
Closes https://github.com/facebook/rocksdb/pull/2498
Differential Revision: D5324269
Pulled By: lightmark
fbshipit-source-id: 6f8a272008b722402a772acfc804524c9d1a483b
Summary:
This patch splits Commit and Prepare into lock-related logic and db-write-related logic. It moves lock-related logic to PessimisticTransaction to be reused by all children classes and movies the existing impl of db-write-related to PrepareInternal, CommitSingleInternal, and CommitInternal in WriteCommittedTxnImpl.
Closes https://github.com/facebook/rocksdb/pull/2691
Differential Revision: D5569464
Pulled By: maysamyabandeh
fbshipit-source-id: d1b8698e69801a4126c7bc211745d05c636f5325
Summary:
When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs.
This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions.
- Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads.
- Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default.
- Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic.
- Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`).
- Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free.
Closes https://github.com/facebook/rocksdb/pull/2580
Differential Revision: D5422916
Pulled By: ajkr
fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
Summary:
This patch refactors TransactionImpl by separating the logic for pessimistic concurrency control from the implementation of how to write the data to rocksdb. The existing implementation is named WriteCommittedTxnImpl as it writes committed data to the db. A template named WritePreparedTxnImpl is also added which will be later completed to provide a an alternative implementation.
Closes https://github.com/facebook/rocksdb/pull/2676
Differential Revision: D5549998
Pulled By: maysamyabandeh
fbshipit-source-id: 16298e86b43ca4849324c1f35c731913c6d17bec
Summary:
Replace dynamic_cast<> so that users can choose to build with RTTI off, so that they can save several bytes per object, and get tiny more memory available.
Some nontrivial changes:
1. Add Comparator::GetRootComparator() to get around the internal comparator hack
2. Add the two experiemental functions to DB
3. Add TableFactory::GetOptionString() to avoid unnecessary casting to get the option string
4. Since 3 is done, move the parsing option functions for table factory to table factory files too, to be symmetric.
Closes https://github.com/facebook/rocksdb/pull/2645
Differential Revision: D5502723
Pulled By: siying
fbshipit-source-id: fd13cec5601cf68a554d87bfcf056f2ffa5fbf7c
Summary:
Add and implement Iterator::Refresh(). When this function is called, if the super version doesn't change, update the sequence number of the iterator to the latest one and invalidate the iterator. If the super version changed, recreated the whole iterator. This can help users reuse the iterator more easily.
Closes https://github.com/facebook/rocksdb/pull/2621
Differential Revision: D5464500
Pulled By: siying
fbshipit-source-id: f548bd35e85c1efca2ea69273802f6704eba6ba9
Summary:
Adding/Correcting inline comments and clarify the sync rules. To make it simple to reason, the rules are a big general which ended up to some extra synchronizations. However such synchronizations are not on the fast path, and they are worth the simplicity.
Closes https://github.com/facebook/rocksdb/pull/2517
Differential Revision: D5348239
Pulled By: maysamyabandeh
fbshipit-source-id: ff2e59fb1e568c122d2cdbf598310f3613b7d212
Summary:
AddDBStats is in two steps of load and store, which is more efficient than fetch_add. This is however not thread-safe. Currently we have to protect concurrent access to AddDBStats with a mutex which is less efficient that fetch_add.
This patch adds the option to do fetch_add when AddDBStats. The results for my 2pc benchmark on sysbench is:
- vanilla: 68618 tps
- removing mutex on AddDBStats (unsafe): 69767 tps
- fetch_add for all AddDBStats: 69200 tps
- fetch_add only for concurrently access AddDBStats (this patch): 69579 tps
Closes https://github.com/facebook/rocksdb/pull/2505
Differential Revision: D5330656
Pulled By: maysamyabandeh
fbshipit-source-id: af64d7bee135b0e86b4fac323a4f9d9113eaa383
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
Some users want to prevent rocksdb from entering read-only mode in certain error cases. This diff gives them a callback, `OnBackgroundError`, that they can use to achieve it.
- call `OnBackgroundError` every time we consider setting `bg_error_`. Use its result to assign `bg_error_` but not to change the function's return status.
- classified calls using `BackgroundErrorReason` to give the callback some info about where the error happened
- renamed `ParanoidCheck` to something more specific so we can provide a clear `BackgroundErrorReason`
- unit tests for the most common cases: flush or compaction errors
Closes https://github.com/facebook/rocksdb/pull/2477
Differential Revision: D5300190
Pulled By: ajkr
fbshipit-source-id: a0ea4564249719b83428e3f4c6ca2c49e366e9b3
Summary:
If ReadOptions.low_pri=true and compaction is behind, the write will either return immediate or be slowed down based on ReadOptions.no_slowdown.
Closes https://github.com/facebook/rocksdb/pull/2369
Differential Revision: D5127619
Pulled By: siying
fbshipit-source-id: d30e1cff515890af0eff32dfb869d2e4c9545eb0
Summary:
- `max_background_flushes` and `max_background_compactions` are still supported for backwards compatibility
- `base_background_compactions` is completely deprecated. Now we just throttle to one background compaction when there's no pressure.
- `max_background_jobs` is added to automatically partition the concurrent background jobs into flushes vs compactions. Currently it's very simple as we just allocate one-fourth of the jobs to flushes, and the remaining can be used for compactions.
- The test cases that set `base_background_compactions > 1` needed to be updated. I just grab the pressure token such that the desired number of compactions can be scheduled.
Closes https://github.com/facebook/rocksdb/pull/2205
Differential Revision: D4937461
Pulled By: ajkr
fbshipit-source-id: df52cbbd497e13bbc9a60560a5ac2a2526b3f1f9
Summary:
PipelineWriteImpl is an alternative approach to WriteImpl. In WriteImpl, only one thread is allow to write at the same time. This thread will do both WAL and memtable writes for all write threads in the write group. Pending writers wait in queue until the current writer finishes. In the pipeline write approach, two queue is maintained: one WAL writer queue and one memtable writer queue. All writers (regardless of whether they need to write WAL) will still need to first join the WAL writer queue, and after the house keeping work and WAL writing, they will need to join memtable writer queue if needed. The benefit of this approach is that
1. Writers without memtable writes (e.g. the prepare phase of two phase commit) can exit write thread once WAL write is finish. They don't need to wait for memtable writes in case of group commit.
2. Pending writers only need to wait for previous WAL writer finish to be able to join the write thread, instead of wait also for previous memtable writes.
Merging #2056 and #2058 into this PR.
Closes https://github.com/facebook/rocksdb/pull/2286
Differential Revision: D5054606
Pulled By: yiwu-arbug
fbshipit-source-id: ee5b11efd19d3e39d6b7210937b11cefdd4d1c8d
Summary:
Adding DB::CreateColumnFamilie() and DB::DropColumnFamilies() to bulk create/drop column families. This is to address the problem creating/dropping 1k column families takes minutes. The bottleneck is we persist options files for every single column family create/drop, and it parses the persisted options file for verification, which take a lot CPU time.
The new APIs simply create/drop column families individually, and persist options file once at the end. This improves create 1k column families to within ~0.1s. Further improvement can be merge manifest write to one IO.
Closes https://github.com/facebook/rocksdb/pull/2248
Differential Revision: D5001578
Pulled By: yiwu-arbug
fbshipit-source-id: d4e00bda671451e0b314c13e12ad194b1704aa03
Summary:
Add a function to allow users to reset internal stats without restarting the DB.
Closes https://github.com/facebook/rocksdb/pull/2167
Differential Revision: D4907939
Pulled By: siying
fbshipit-source-id: ab2dd85b88aabe9380da7485320a1d460d3e1f68
Summary:
The concept about early exit in write thread implementation is a confusing one. It means that if early exit is allowed, batch group leader will not responsible to exit the batch group, but the last finished writer do. In case we need to mark log synced, or encounter memtable insert error, early exit is disallowed.
This patch remove such a concept by:
* In all cases, the last finished writer (not necessary leader) is responsible to exit batch group.
* In case of parallel memtable write, leader will also mark log synced after memtable insert and before signal finish (call `CompleteParallelWorker()`). The purpose is to allow mark log synced (which require locking mutex) can run in parallel to memtable insert in other writers.
* The last finish writer should handle memtable insert error (update bg_error_) before exiting batch group.
Closes https://github.com/facebook/rocksdb/pull/2134
Differential Revision: D4869667
Pulled By: yiwu-arbug
fbshipit-source-id: aec170847c85b90f4179d6a4608a4fe1361544e3
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
db_impl.cc is too large to manage. Divide db_impl.cc into db/db_impl.cc, db/db_impl_compaction_flush.cc, db/db_impl_files.cc, db/db_impl_open.cc and db/db_impl_write.cc.
Closes https://github.com/facebook/rocksdb/pull/2095
Differential Revision: D4838188
Pulled By: siying
fbshipit-source-id: c5f3059
Summary:
Refactor WriteImpl() so when I plug-in the pipeline write code (which is
an alternative approach for WriteThread), some of the logic can be
reuse. I split out the following methods from WriteImpl():
* PreprocessWrite()
* HandleWALFull() (previous MaybeFlushColumnFamilies())
* HandleWriteBufferFull()
* WriteToWAL()
Also adding a constructor to WriteThread::Writer, and move WriteContext into db_impl.h.
No real logic change in this patch.
Closes https://github.com/facebook/rocksdb/pull/2042
Differential Revision: D4781014
Pulled By: yiwu-arbug
fbshipit-source-id: d45ca18
Summary:
Add two DB properties: rocksdb.actual_delayed_write_rate and rocksdb.is_write_stooped, for people to know whether current writes are being throttled.
Closes https://github.com/facebook/rocksdb/pull/2043
Differential Revision: D4782975
Pulled By: siying
fbshipit-source-id: 6b2f5cf
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
Seems to me `has_unpersisted_data_` is read from read thread and write
from write thread concurrently without synchronization. Making it an
atomic.
I update the logic not because seeing any problem with it, but it just
feel confusing.
Closes https://github.com/facebook/rocksdb/pull/1869
Differential Revision: D4555837
Pulled By: yiwu-arbug
fbshipit-source-id: eff2ab8
Summary:
Added method that returns approx num of entries as well as size for memtables.
Closes https://github.com/facebook/rocksdb/pull/1841
Differential Revision: D4511990
Pulled By: VitaliyLi
fbshipit-source-id: 9a4576e
Summary:
GetAndRefSuperVersionUnlocked
ReturnAndCleanupSuperVersionUnlocked
GetColumnFamilyHandleUnlocked
Are dead code that are not used any where
Closes https://github.com/facebook/rocksdb/pull/1802
Differential Revision: D4459948
Pulled By: IslamAbdelRahman
fbshipit-source-id: 30fa89d
Summary:
Added an option to GetApproximateSizes to exclude file stats, as MyRocks has those counted exactly and we need only stats from memtables.
Closes https://github.com/facebook/rocksdb/pull/1787
Differential Revision: D4441111
Pulled By: IslamAbdelRahman
fbshipit-source-id: c11f4c3
Summary:
Consider the following single column family scenario:
prepare in log A
commit in log B
*WAL is too large, flush all CFs to releast log A*
*CFA is on log B so we do not see CFA is depending on log A so no flush is requested*
To fix this we must also consider the log containing the prepare section when determining what log a CF is dependent on.
Closes https://github.com/facebook/rocksdb/pull/1768
Differential Revision: D4403265
Pulled By: reidHoruff
fbshipit-source-id: ce800ff
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
If 2PC is enabled, checkpoint may not copy previous log files that contain uncommitted prepare records. In this diff we keep those files.
Closes https://github.com/facebook/rocksdb/pull/1724
Differential Revision: D4368319
Pulled By: siying
fbshipit-source-id: cc2c746
Summary:
Made delete_obsolete_files_period_micros option dynamic. It can be updating using DB::SetDBOptions().
Closes https://github.com/facebook/rocksdb/pull/1595
Differential Revision: D4246569
Pulled By: tonek
fbshipit-source-id: d23f560
Summary:
If the WriteOptions.no_slowdown flag is set AND we need to wait or sleep for
the write request, then fail immediately with Status::Incomplete().
Closes https://github.com/facebook/rocksdb/pull/1527
Differential Revision: D4191405
Pulled By: maysamyabandeh
fbshipit-source-id: 7f3ce3f
Summary:
Currently the compaction stats are printed to stdout. We want to export the compaction stats in a map format so that the upper layer apps (e.g., MySQL) could present
the stats in any format required by the them.
Closes https://github.com/facebook/rocksdb/pull/1477
Differential Revision: D4149836
Pulled By: maysamyabandeh
fbshipit-source-id: b3df19f
Summary:
Note: reviewed in https://reviews.facebook.net/D65115
- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464
Differential Revision: D4131753
Pulled By: ajkr
fbshipit-source-id: be86559
Summary:
change ioptions.comparator to user_comparator instread of internal_comparator.
Also change Comparator* to InternalKeyComparator* to make its type explicitly.
Test Plan: make all check -j64
Reviewers: andrewkr, sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D65121
Summary:
Changes in the diff
API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API
Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers
Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob
Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)
Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: jkedgar, hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65061
Summary:
MyRocks hit a regression, @mung generated perf reports showing that the reason is the cost of calling `GetDBOptions()` inside `GetFromBatchAndDB()`
This diff avoid calling `GetDBOptions` and use the `ImmutableDBOptions` instead
Test Plan: make check -j64
Reviewers: sdong, yiwu
Reviewed By: yiwu
Subscribers: andrewkr, dhruba, mung
Differential Revision: https://reviews.facebook.net/D65151
Summary:
Issue scenario:
(1) We have 3 files in L1 and we issue a compaction that will compact them into 1 file in L2
(2) While compaction (1) is running, we flush a file into L0 and trigger another compaction that decide to move this file to L1 and then move it again to L2 (this file don't overlap with any other files)
(3) compaction (1) finishes and install the file it generated in L2, but this file overlap with the file we generated in (2) so we break the LSM consistency
Looks like this issue can be triggered by using non-exclusive manual compaction or AddFile()
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: hermanlee4, jkedgar, andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D64947
Summary:
Fix the conflict bug between AddFile() and CompactRange() by
- Make sure that no AddFile calls are running when asking CompactionPicker to pick compaction for manual compaction
- If AddFile() run after we pick the compaction for the manual compaction it will be aware of it since we will add the manual compaction to running_compactions_ after picking it
This will solve these 2 scenarios
- If AddFile() is running, we will wait for it to finish before we pick a compaction for the manual compaction
- If we already picked a manual compaction and then AddFile() started ... we ensure that it never ingest a file in a level that will overlap with the manual compaction
Test Plan: unit tests
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64449
Summary:
Since AddFile unlock/lock the mutex inside LogAndApply() we need to ensure that during this period other compactions cannot run since such compactions are not aware of the file we are ingesting and could create a compaction that overlap wit this file
this diff add
- WaitForAddFile() call that will ensure that no AddFile() calls are being processed right now
- Call `WaitForAddFile()` in 3 locations
-- When doing manual Compaction
-- When starting automatic Compaction
-- When doing CompactFiles()
Test Plan: unit test
Reviewers: lightmark, yiwu, andrewkr, sdong
Reviewed By: sdong
Subscribers: andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64383
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
Revert the behavior where we don't read sequence id from WAL, but increase it as we replay the log. We still keep the behave for 2PC for now but will fix later.
This change fixes github issue 1339, where some writes come with WAL disabled and we may recover records with wrong sequence id.
Test Plan: Added unit test.
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64275
Summary: WritableFile::SetPreallocationBlockSize() requires parameter as size_t, and options used in DBImpl::GetWalPreallocateBlockSize() are all size_t. WritableFile::SetPreallocationBlockSize() should return size_t to avoid build break if size_t is not uint64_t.
Test Plan: Run existing tests.
Reviewers: andrewkr, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D64137
Summary: Currently the WAL file preallocation size is 1.1 * write_buffer_size. This, however, will be over-estimated if options.db_write_buffer_size or options.max_total_wal_size is set and is much smaller.
Test Plan: Add a unit test.
Reviewers: andrewkr, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D63957
Summary: As title, make sure Prev() works as expected with Next() when the current iter->key() in the range of the same prefix in prefix seek mode
Test Plan: make all check -j64 (add prefix_test with PrefixSeekModePrev test case)
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: yoshinorim, andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61419
Summary: 1. Range Deletion Tombstone structure 2. Modify Add() in table_builder to make it usable for adding range del tombstones 3. Expose NewTombstoneIterator() API in table_reader
Test Plan: table_test.cc (now BlockBasedTableBuilder::Add() only accepts InternalKey. I make table_test only pass InternalKey to BlockBasedTableBuidler. Also test writing/reading range deletion tombstones in table_test )
Reviewers: sdong, IslamAbdelRahman, lightmark, andrewkr
Reviewed By: andrewkr
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61473
Summary: With read_options.background_purge_on_iterator_cleanup=true, File deletion and closing can still happen in forward iterator, or WAL file closing. Cover those cases too.
Test Plan: I am adding unit tests.
Reviewers: andrewkr, IslamAbdelRahman, yiwu
Reviewed By: yiwu
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D61503
* Added check_snapshot option in the DB's AddFile function
* change check_snapshot to skip_snapshot_check
* add unit test for skip_snapshot_check
* Add skip_snapshot_check comment
Summary:
My understanding is that the purpose of write stall triggers are to wait for auto-compaction to catch up. Without auto-compaction, we don't need to stall writes.
Also with this diff, flush/compaction conditions are recalculated on dynamic option change. Previously the conditions are recalculate only when write stall options are changed.
Test Plan: See the new test. Removed two tests that are no longer valid.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D61437
Summary: Multiput atomiciy is broken across multiple column families if we don't sync WAL before flushing one column family. The WAL file may contain a write batch containing writes to a key to the CF to be flushed and a key to other CF. If we don't sync WAL before flushing, if machine crashes after flushing, the write batch will only be partial recovered. Data to other CFs are lost.
Test Plan: Add a new unit test which will fail without the diff.
Reviewers: yhchiang, IslamAbdelRahman, igor, yiwu
Reviewed By: yiwu
Subscribers: yiwu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60915
Summary:
When write stalls because of auto compaction is disabled, or stop write trigger is reached,
user may change these two options to unblock writes. Unfortunately we had issue where the write
thread will block the attempt to persist the options, thus creating a deadlock. This diff
fix the issue and add two test cases to detect such deadlock.
Test Plan:
Run unit tests.
Also, revert db_impl.cc to master (but don't revert `DBImpl::BackgroundCompaction:Finish` sync point) and run db_options_test. Both tests should hit deadlock.
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D60627
Summary:
DB::AddFile(std::string file_path) API that allow them to ingest an SST file created using SstFileWriter
We want to update this interface to be able to accept a list of files that will be ingested, DB::AddFile(std::vector<std::string> file_path_list).
Test Plan:
Add test case `AddExternalSstFileList` in `DBSSTTest`. To make sure:
1. files key ranges are not overlapping with each other
2. each file key range dont overlap with the DB key range
3. make sure no snapshots are held
Reviewers: andrewkr, sdong, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D58587
Summary: We saw instances where total_log_size is off the real value, but I'm not able to reproduce it. Add more logging to help debugging when it happens again.
Test Plan: Run the unit test and see the logging.
Reviewers: andrewkr, yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D60081
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
Summary:
To support column families, it is easiest to use VersionSet to manage
our column families (if we don't have Versions then ColumnFamilyData always
behaves as a dummy column family). This diff only refactors the existing repair
logic to use VersionSet; the next two parts will add support for multiple
column families.
Test Plan:
$ ./repair_test
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D59775
Summary:
Add a read option `background_purge_on_iterator_cleanup` to avoid deleting files in foreground when destroying iterators.
Instead, a job is scheduled in high priority queue and would be executed in a separate background thread.
Test Plan: Add a variant of PurgeObsoleteFileTest. Turn on background purge option in the new test, and use sleeping task to ensure files are deleted in background.
Reviewers: IslamAbdelRahman, sdong
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59499
Summary:
DB::AddFile() right now always add the ingested file to L0
update the logic to add the file to the lowest possible level
Test Plan: unit tests
Reviewers: jkedgar, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D59637
Summary: Backup options file to private directory
Test Plan:
backupable_db_test.cc, BackupOptions
Modify DB options by calling OpenDB for 3 times. Check the latest options file is in the right place. Also check no redundent files are backuped.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D59373
* Create a callback for memtable becoming immutable
Create a callback for memtable becoming immutable
Create a callback for memtable becoming immutable
moved notification outside the lock
Move sealed notification to unlocked portion of SwitchMemtable
* fix lite build
Summary: This tests that a prepared transaction is not lost after several crashes, restarts, and memtable flushes.
Test Plan: TwoPhaseLongPrepareTest
Reviewers: sdong
Subscribers: hermanlee4, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D58185
Summary:
This diff is built on top of WriteBatch modification: https://reviews.facebook.net/D54093 and adds the required functionality to rocksdb core necessary for rocksdb to support 2PC.
modfication of DBImpl::WriteImpl()
- added two arguments *uint64_t log_used = nullptr, uint64_t log_ref = 0;
- *log_used is an output argument which will return the log number which the incoming batch was inserted into, 0 if no WAL insert took place.
- log_ref is a supplied log_number which all memtables inserted into will reference after the batch insert takes place. This number will reside in 'FindMinPrepLogReferencedByMemTable()' until all Memtables insertinto have flushed.
- Recovery/writepath is now aware of prepared batches and commit and rollback markers.
Test Plan: There is currently no test on this diff. All testing of this functionality takes place in the Transaction layer/diff but I will add some testing.
Reviewers: IslamAbdelRahman, sdong
Subscribers: leveldb, santoshb, andrewkr, vasilep, dhruba, hermanlee4
Differential Revision: https://reviews.facebook.net/D56919
Summary: CompactedDB skips memtable. So we shouldn't use compacted DB if there is outstanding WAL files.
Test Plan: Change to options.max_open_files = -1 perf context test to create a compacted DB, which we shouldn't do.
Reviewers: yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D57057
Summary:
In https://reviews.facebook.net/D56271, we fixed an issue where
we consider flush as compaction. However, that makes us mistakenly
count FLUSH_WRITE_BYTES twice (one in flush_job and one in db_impl.)
This patch removes the one incremented in db_impl.
Test Plan: db_test
Reviewers: yiwu, andrewkr, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D57111
Summary:
Currently, when rocksdb tries to run manual compaction to refit data into a level,
there's a ReFitLevel() process that requires no bg work is currently running.
When RocksDB plans to ReFitLevel(), it will do the following:
1. pause scheduling new bg work.
2. wait until all bg work finished
3. do the ReFitLevel()
4. unpause scheduling new bg work.
However, as it pause scheduling new bg work at step one and waiting for all bg work
finished in step 2, RocksDB will stop flushing until all bg work is done (which
could take a long time.)
This patch fix this issue by changing the way ReFitLevel() pause the background work:
1. pause scheduling compaction.
2. wait until all bg work finished.
3. pause scheduling flush
4. do ReFitLevel()
5. unpause both flush and compaction.
The major difference is that. We only pause scheduling compaction in step 1 and wait
for all bg work finished in step 2. This prevent flush being blocked for a long time.
Although there's a very rare case that ReFitLevel() might be in starvation in step 2,
but it's less likely the case as flush typically finish very fast.
Test Plan: existing test.
Reviewers: anthony, IslamAbdelRahman, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D55029
Summary:
The call to
```
CaptureCurrentFileNumberInPendingOutputs()
```
should be before
```
versions_->NewFileNumber()
```
Right now we are not actually protecting the file from being deleted
Test Plan: make check
Reviewers: sdong, anthony, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D54645
Summary:
Add kSstFileTier to ReadTier, which allows Get and MultiGet to
read only directly from SST files and skip mem-tables.
kSstFileTier = 0x2 // data in SST files.
// Note that this ReadTier currently only supports
// Get and MultiGet and does not support iterators.
Test Plan: add new test in db_test.
Reviewers: anthony, IslamAbdelRahman, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: igor, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53511
Summary:
Before this diff, there were duplicated constants to refer to properties (user-
facing API had strings and InternalStats had an enum). I noticed these were
inconsistent in terms of which constants are provided, names of constants, and
documentation of constants. Overall it seemed annoying/error-prone to maintain
these duplicated constants.
So, this diff gets rid of InternalStats's constants and replaces them with a map
keyed on the user-facing constant. The value in that map contains a function
pointer to get the property value, so we don't need to do string matching while
holding db->mutex_. This approach has a side benefit of making many small
handler functions rather than a giant switch-statement.
Test Plan: db_properties_test passes, running "make commit-prereq -j32"
Reviewers: sdong, yhchiang, kradhakrishnan, IslamAbdelRahman, rven, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53253
Summary:
If options.base_background_compactions is given, we try to schedule number of compactions not existing this number, only when L0 files increase to certain number, or pending compaction bytes more than certain threshold, we schedule compactions based on options.max_background_compactions.
The watermarks are calculated based on slowdown thresholds.
Test Plan:
Add new test cases in column_family_test.
Adding more unit tests.
Reviewers: IslamAbdelRahman, yhchiang, kradhakrishnan, rven, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D53409
Summary:
This is an initial diff for providing the ability to delete
files which are completely within a given range of keys.
Test Plan: DBCompactionTest.DeleteRange
Reviewers: IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52293
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
