Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
This reverts commit 73f21a7b21.
It breaks compatibility. When created a DB using a build with this new change, opening the DB and reading the data will fail with this error:
"Corruption: Can't access /000000.sst: IO error: while stat a file for size: /tmp/xxxx/000000.sst: No such file or directory"
This is because the dummy AddFile4 entry generated by the new code will be treated as a real entry by an older build. The older build will think there is a real file with number 0, but there isn't such a file.
Closes https://github.com/facebook/rocksdb/pull/3762
Differential Revision: D7730035
Pulled By: siying
fbshipit-source-id: f2051859eff20ef1837575ecb1e1bb96b3751e77
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
Level Compaction with TTL.
As of today, a file could exist in the LSM tree without going through the compaction process for a really long time if there are no updates to the data in the file's key range. For example, in certain use cases, the keys are not actually "deleted"; instead they are just set to empty values. There might not be any more writes to this "deleted" key range, and if so, such data could remain in the LSM for a really long time resulting in wasted space.
Introducing a TTL could solve this problem. Files (and, in turn, data) older than TTL will be scheduled for compaction when there is no other background work. This will make the data go through the regular compaction process and get rid of old unwanted data.
This also has the (good) side-effect of all the data in the non-bottommost level being newer than ttl, and all data in the bottommost level older than ttl. It could lead to more writes while reducing space.
This functionality can be controlled by the newly introduced column family option -- ttl.
TODO for later:
- Make ttl mutable
- Extend TTL to Universal compaction as well? (TTL is already supported in FIFO)
- Maybe deprecate CompactionOptionsFIFO.ttl in favor of this new ttl option.
Closes https://github.com/facebook/rocksdb/pull/3591
Differential Revision: D7275442
Pulled By: sagar0
fbshipit-source-id: dcba484717341200d419b0953dafcdf9eb2f0267
Summary:
This patch record the deleted WAL numbers in the manifest to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Closes https://github.com/facebook/rocksdb/pull/3488
Differential Revision: D6967893
Pulled By: maysamyabandeh
fbshipit-source-id: 13119feb155a08ab6d4909f437c7a750480dc8a1
Summary:
If there are a lot of overlapped files in L0, creating a merging iterator for
all files in L0 to check overlap can be very slow because we need to read and
seek all files in L0. However, in that case, the ingested file is likely to
overlap with some files in L0, so if we check those files one by one, we can stop
once we encounter overlap.
Ref: https://github.com/facebook/rocksdb/issues/3540
Closes https://github.com/facebook/rocksdb/pull/3564
Differential Revision: D7196784
Pulled By: anand1976
fbshipit-source-id: 8700c1e903bd515d0fa7005b6ce9b3a3d9db2d67
Summary:
Add "rocksdb.live-sst-files-size" DB property which only include files of latest version. Existing "rocksdb.total-sst-files-size" include files from all versions and thus include files that's obsolete but not yet deleted. I'm going to use this new property to cap blob db sst + blob files size.
Closes https://github.com/facebook/rocksdb/pull/3548
Differential Revision: D7116939
Pulled By: yiwu-arbug
fbshipit-source-id: c6a52e45ce0f24ef78708156e1a923c1dd6bc79a
Summary:
Add PreReleaseCallback to be called at the end of WriteImpl but before publishing the sequence number. The callback is used in WritePrepareTxn to i) update the commit map, ii) update the last published sequence number in the 2nd write queue. It also ensures that all the commits will go to the 2nd queue.
These changes will ensure that the commit map is updated before the sequence number is published and used by reading snapshots. If we use two write queues, the snapshots will use the seq number published by the 2nd queue. If we use one write queue (the default, the snapshots will use the last seq number in the memtable, which also indicates the last published seq number.
Closes https://github.com/facebook/rocksdb/pull/3205
Differential Revision: D6438959
Pulled By: maysamyabandeh
fbshipit-source-id: f8b6c434e94bc5f5ab9cb696879d4c23e2577ab9
Summary:
Before we were checking every file in the level which was unnecessary. We can piggyback onto the code for checking point-key overlap, which already opens all the files that could possibly contain overlapping range deletions. This PR makes us check just the range deletions from those files, so no extra ones will be opened.
Closes https://github.com/facebook/rocksdb/pull/3179
Differential Revision: D6358125
Pulled By: ajkr
fbshipit-source-id: 00e200770fdb8f3cc6b1b2da232b755e4ba36279
Summary:
When snapshots are held for a long time, files may reach the bottom level containing overwritten/deleted keys. We previously had no mechanism to trigger compaction on such files. This particularly impacted DBs that write to different parts of the keyspace over time, as such files would never be naturally compacted due to second-last level files moving down. This PR introduces a mechanism for bottommost files to be recompacted upon releasing all snapshots that prevent them from dropping their deleted/overwritten keys.
- Changed `CompactionPicker` to compact files in `BottommostFilesMarkedForCompaction()`. These are the last choice when picking. Each file will be compacted alone and output to the same level in which it originated. The goal of this type of compaction is to rewrite the data excluding deleted/overwritten keys.
- Changed `ReleaseSnapshot()` to recompute the bottom files marked for compaction when the oldest existing snapshot changes, and schedule a compaction if needed. We cache the value that oldest existing snapshot needs to exceed in order for another file to be marked in `bottommost_files_mark_threshold_`, which allows us to avoid recomputing marked files for most snapshot releases.
- Changed `VersionStorageInfo` to track the list of bottommost files, which is recomputed every time the version changes by `UpdateBottommostFiles()`. The list of marked bottommost files is first computed in `ComputeBottommostFilesMarkedForCompaction()` when the version changes, but may also be recomputed when `ReleaseSnapshot()` is called.
- Extracted core logic of `Compaction::IsBottommostLevel()` into `VersionStorageInfo::RangeMightExistAfterSortedRun()` since logic to check whether a file is bottommost is now necessary outside of compaction.
Closes https://github.com/facebook/rocksdb/pull/3009
Differential Revision: D6062044
Pulled By: ajkr
fbshipit-source-id: 123d201cf140715a7d5928e8b3cb4f9cd9f7ad21
Summary:
The file numbers assigned post-repair were sometimes smaller than older files' numbers due to `LogAndApply` saving the wrong next file number in the manifest.
- Mark the highest file seen during repair as used before `LogAndApply` so the correct next file number will be stored.
- Renamed `MarkFileNumberUsedDuringRecovery` to `MarkFileNumberUsed` since now it's used during repair in addition to during recovery
- Added `TEST_Current_Next_FileNo` to expose the next file number for the unit test.
Closes https://github.com/facebook/rocksdb/pull/2988
Differential Revision: D6018083
Pulled By: ajkr
fbshipit-source-id: 3f25cbf74439cb8f16dd12af90b67f9f9f75e718
Summary:
Add kTypeBlobIndex value type, which will be used by blob db only, to insert a (key, blob_offset) KV pair. The purpose is to
1. Make it possible to open existing rocksdb instance as blob db. Existing value will be of kTypeIndex type, while value inserted by blob db will be of kTypeBlobIndex.
2. Make rocksdb able to detect if the db contains value written by blob db, if so return error.
3. Make it possible to have blob db optionally store value in SST file (with kTypeValue type) or as a blob value (with kTypeBlobIndex type).
The root db (DBImpl) basically pretended kTypeBlobIndex are normal value on write. On Get if is_blob is provided, return whether the value read is of kTypeBlobIndex type, or return Status::NotSupported() status if is_blob is not provided. On scan allow_blob flag is pass and if the flag is true, return wether the value is of kTypeBlobIndex type via iter->IsBlob().
Changes on blob db side will be in a separate patch.
Closes https://github.com/facebook/rocksdb/pull/2886
Differential Revision: D5838431
Pulled By: yiwu-arbug
fbshipit-source-id: 3c5306c62bc13bb11abc03422ec5cbcea1203cca
Summary:
This patch instruments the read path to verify each read value against an optional ReadCallback class. If the value is rejected, the reader moves on to the next value. The WritePreparedTxn makes use of this feature to skip sequence numbers that are not in the read snapshot.
Closes https://github.com/facebook/rocksdb/pull/2850
Differential Revision: D5787375
Pulled By: maysamyabandeh
fbshipit-source-id: 49d808b3062ab35e7ae98ad388f659757794184c
Summary:
When we had a single thread pool for compactions, a thread could be busy for a long time (minutes) executing a compaction involving the bottom level. In multi-instance setups, the entire thread pool could be consumed by such bottom-level compactions. Then, top-level compactions (e.g., a few L0 files) would be blocked for a long time ("head-of-line blocking"). Such top-level compactions are critical to prevent compaction stalls as they can quickly reduce number of L0 files / sorted runs.
This diff introduces a bottom-priority queue for universal compactions including the bottom level. This alleviates the head-of-line blocking situation for fast, top-level compactions.
- Added `Env::Priority::BOTTOM` thread pool. This feature is only enabled if user explicitly configures it to have a positive number of threads.
- Changed `ThreadPoolImpl`'s default thread limit from one to zero. This change is invisible to users as we call `IncBackgroundThreadsIfNeeded` on the low-pri/high-pri pools during `DB::Open` with values of at least one. It is necessary, though, for bottom-pri to start with zero threads so the feature is disabled by default.
- Separated `ManualCompaction` into two parts in `PrepickedCompaction`. `PrepickedCompaction` is used for any compaction that's picked outside of its execution thread, either manual or automatic.
- Forward universal compactions involving last level to the bottom pool (worker thread's entry point is `BGWorkBottomCompaction`).
- Track `bg_bottom_compaction_scheduled_` so we can wait for bottom-level compactions to finish. We don't count them against the background jobs limits. So users of this feature will get an extra compaction for free.
Closes https://github.com/facebook/rocksdb/pull/2580
Differential Revision: D5422916
Pulled By: ajkr
fbshipit-source-id: a74bd11f1ea4933df3739b16808bb21fcd512333
Summary:
This reverts the previous commit 1d7048c598, which broke the build.
Did a `git revert 1d7048c`.
Closes https://github.com/facebook/rocksdb/pull/2627
Differential Revision: D5476473
Pulled By: sagar0
fbshipit-source-id: 4756ff5c0dfc88c17eceb00e02c36176de728d06
Summary: This uses `clang-tidy` to comment out unused parameters (in functions, methods and lambdas) in fbcode. Cases that the tool failed to handle are fixed manually.
Reviewed By: igorsugak
Differential Revision: D5454343
fbshipit-source-id: 5dee339b4334e25e963891b519a5aa81fbf627b2
Summary:
Throughput: 46k tps in our sysbench settings (filling the details later)
The idea is to have the simplest change that gives us a reasonable boost
in 2PC throughput.
Major design changes:
1. The WAL file internal buffer is not flushed after each write. Instead
it is flushed before critical operations (WAL copy via fs) or when
FlushWAL is called by MySQL. Flushing the WAL buffer is also protected
via mutex_.
2. Use two sequence numbers: last seq, and last seq for write. Last seq
is the last visible sequence number for reads. Last seq for write is the
next sequence number that should be used to write to WAL/memtable. This
allows to have a memtable write be in parallel to WAL writes.
3. BatchGroup is not used for writes. This means that we can have
parallel writers which changes a major assumption in the code base. To
accommodate for that i) allow only 1 WriteImpl that intends to write to
memtable via mem_mutex_--which is fine since in 2PC almost all of the memtable writes
come via group commit phase which is serial anyway, ii) make all the
parts in the code base that assumed to be the only writer (via
EnterUnbatched) to also acquire mem_mutex_, iii) stat updates are
protected via a stat_mutex_.
Note: the first commit has the approach figured out but is not clean.
Submitting the PR anyway to get the early feedback on the approach. If
we are ok with the approach I will go ahead with this updates:
0) Rebase with Yi's pipelining changes
1) Currently batching is disabled by default to make sure that it will be
consistent with all unit tests. Will make this optional via a config.
2) A couple of unit tests are disabled. They need to be updated with the
serial commit of 2PC taken into account.
3) Replacing BatchGroup with mem_mutex_ got a bit ugly as it requires
releasing mutex_ beforehand (the same way EnterUnbatched does). This
needs to be cleaned up.
Closes https://github.com/facebook/rocksdb/pull/2345
Differential Revision: D5210732
Pulled By: maysamyabandeh
fbshipit-source-id: 78653bd95a35cd1e831e555e0e57bdfd695355a4
Summary:
We estimate number of reads per SST files, by updating the counter per file in sampled read requests. This information can later be used to trigger compactions to improve read performacne.
Closes https://github.com/facebook/rocksdb/pull/2417
Differential Revision: D5193528
Pulled By: siying
fbshipit-source-id: b4241c5ad0eaf444b61afb53f8e6290d9f5da2df
Summary:
The range deletion meta-block iterators weren't getting cleaned up properly since they don't support arena allocation. I didn't implement arena support since, in the general case, each iterator is used only once and separately from all other iterators, so there should be no benefit to data locality.
Anyways, this diff fixes up #2370 by treating range deletion iterators as non-arena-allocated.
Closes https://github.com/facebook/rocksdb/pull/2399
Differential Revision: D5171119
Pulled By: ajkr
fbshipit-source-id: bef6f5c4c5905a124f4993945aed4bd86e2807d8
Summary:
Previously we returned NotSupported when ingesting files into a database containing any range deletions. This diff adds the support.
- Flush if any memtable contains range deletions overlapping the to-be-ingested file
- Place to-be-ingested file before any level that contains range deletions overlapping it.
- Added support for `Version` to return iterators over range deletions in a given level. Previously, we piggybacked getting range deletions onto `Version`'s `Get()` / `AddIterator()` functions by passing them a `RangeDelAggregator*`. But file ingestion needs to get iterators over range deletions, not populate an aggregator (since the aggregator does collapsing and doesn't expose the actual ranges).
Closes https://github.com/facebook/rocksdb/pull/2370
Differential Revision: D5127648
Pulled By: ajkr
fbshipit-source-id: 816faeb9708adfa5287962bafdde717db56e3f1a
Summary:
Move some files under util/ to new directories env/, monitoring/ options/ and cache/
Closes https://github.com/facebook/rocksdb/pull/2090
Differential Revision: D4833681
Pulled By: siying
fbshipit-source-id: 2fd8bef
Summary:
PinnableSlice
Summary:
Currently the point lookup values are copied to a string provided by the
user. This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
value 100 byte: 1.8% regular, 1.2% merge values
value 1k byte: 11.5% regular, 7.5% merge values
value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The d
Closes https://github.com/facebook/rocksdb/pull/1756
Differential Revision: D4391738
Pulled By: maysamyabandeh
fbshipit-source-id: 6f3edd3
Summary:
reimplement the compaction expansion on lower level.
Considering such a case:
input level file: 1[B E] 2[F G] 3[H I] 4 [J M]
output level file: 5[A C] 6[D K] 7[L O]
If we initially pick file 2, now we will compact file 2 and 6. But we can safely compact 2, 3 and 6 without expanding the output level.
The previous code is messy and wrong.
In this diff, I first determine the input range [a, b], and output range [c, d],
then we get the range [e,f] = [min(a, c), max(b, d] and put all eligible clean-cut files within [e, f] into this compaction.
**Note: clean-cut means the files don't have the same user key on the boundaries of some files that are not chosen in this compaction**.
Closes https://github.com/facebook/rocksdb/pull/1760
Differential Revision: D4395564
Pulled By: lightmark
fbshipit-source-id: 2dc2c5c
Summary:
Fix the bug when sync log fail, FlushJob::Run() will not be execute and
reference to cfd->current() will not be release.
Closes https://github.com/facebook/rocksdb/pull/1792
Differential Revision: D4441316
Pulled By: yiwu-arbug
fbshipit-source-id: 5523e28
Summary:
Currently the point lookup values are copied to a string provided by the user.
This incures an extra memcpy cost. This patch allows doing point lookup
via a PinnableSlice which pins the source memory location (instead of
copying their content) and releases them after the content is consumed
by the user. The old API of Get(string) is translated to the new API
underneath.
Here is the summary for improvements:
1. value 100 byte: 1.8% regular, 1.2% merge values
2. value 1k byte: 11.5% regular, 7.5% merge values
3. value 10k byte: 26% regular, 29.9% merge values
The improvement for merge could be more if we extend this approach to
pin the merge output and delay the full merge operation until the user
actually needs it. We have put that for future work.
PS:
Sometimes we observe a small decrease in performance when switching from
t5452014 to this patch but with the old Get(string) API. The difference
is a little and could be noise. More importantly it is safely
cancelled
Closes https://github.com/facebook/rocksdb/pull/1732
Differential Revision: D4374613
Pulled By: maysamyabandeh
fbshipit-source-id: a077f1a
Summary:
Note: reviewed in https://reviews.facebook.net/D65115
- DBIter maintains a range tombstone accumulator. We don't cleanup obsolete tombstones yet, so if the user seeks back and forth, the same tombstones would be added to the accumulator multiple times.
- DBImpl::NewInternalIterator() (used to make DBIter's underlying iterator) adds memtable/L0 range tombstones, L1+ range tombstones are added on-demand during NewSecondaryIterator() (see D62205)
- DBIter uses ShouldDelete() when advancing to check whether keys are covered by range tombstones
Closes https://github.com/facebook/rocksdb/pull/1464
Differential Revision: D4131753
Pulled By: ajkr
fbshipit-source-id: be86559
Summary:
During Get()/MultiGet(), build up a RangeDelAggregator with range
tombstones as we search through live memtable, immutable memtables, and
SST files. This aggregator is then used by memtable.cc's SaveValue() and
GetContext::SaveValue() to check whether keys are covered.
added tests for Get on memtables/files; end-to-end tests mainly in https://reviews.facebook.net/D64761
Closes https://github.com/facebook/rocksdb/pull/1456
Differential Revision: D4111271
Pulled By: ajkr
fbshipit-source-id: 6e388d4
Summary:
Changes in the diff
API changes:
- Introduce IngestExternalFile to replace AddFile (I think this make the API more clear)
- Introduce IngestExternalFileOptions (This struct will encapsulate the options for ingesting the external file)
- Deprecate AddFile() API
Logic changes:
- If our file overlap with the memtable we will flush the memtable
- We will find the first level in the LSM tree that our file key range overlap with the keys in it
- We will find the lowest level in the LSM tree above the the level we found in step 2 that our file can fit in and ingest our file in it
- We will assign a global sequence number to our new file
- Remove AddFile restrictions by using global sequence numbers
Other changes:
- Refactor all AddFile logic to be encapsulated in ExternalSstFileIngestionJob
Test Plan:
unit tests (still need to add more)
addfile_stress (https://reviews.facebook.net/D65037)
Reviewers: yiwu, andrewkr, lightmark, yhchiang, sdong
Reviewed By: sdong
Subscribers: jkedgar, hcz, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D65061
Summary:
This diff introduces RangeDelAggregator, which takes ownership of iterators
provided to it via AddTombstones(). The tombstones are organized in a two-level
map (snapshot stripe -> begin key -> tombstone). Tombstone creation avoids data
copy by holding Slices returned by the iterator, which remain valid thanks to pinning.
For compaction, we create a hierarchical range tombstone iterator with structure
matching the iterator over compaction input data. An aggregator based on that
iterator is used by CompactionIterator to determine which keys are covered by
range tombstones. In case of merge operand, the same aggregator is used by
MergeHelper. Upon finishing each file in the compaction, relevant range tombstones
are added to the output file's range tombstone metablock and file boundaries are
updated accordingly.
To check whether a key is covered by range tombstone, RangeDelAggregator::ShouldDelete()
considers tombstones in the key's snapshot stripe. When this function is used outside of
compaction, it also checks newer stripes, which can contain covering tombstones. Currently
the intra-stripe check involves a linear scan; however, in the future we plan to collapse ranges
within a stripe such that binary search can be used.
RangeDelAggregator::AddToBuilder() adds all range tombstones in the table's key-range
to a new table's range tombstone meta-block. Since range tombstones may fall in the gap
between files, we may need to extend some files' key-ranges. The strategy is (1) first file
extends as far left as possible and other files do not extend left, (2) all files extend right
until either the start of the next file or the end of the last range tombstone in the gap,
whichever comes first.
One other notable change is adding release/move semantics to ScopedArenaIterator
such that it can be used to transfer ownership of an arena-allocated iterator, similar to
how unique_ptr is used for malloc'd data.
Depends on D61473
Test Plan: compaction_iterator_test, mock_table, end-to-end tests in D63927
Reviewers: sdong, IslamAbdelRahman, wanning, yhchiang, lightmark
Reviewed By: lightmark
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D62205
Summary:
We always run consistency checks when compiling in debug mode
allow users to set Options::force_consistency_checks to true to be able to run such checks even when compiling in release mode
Test Plan:
make check -j64
make release
Reviewers: lightmark, sdong, yiwu
Reviewed By: yiwu
Subscribers: hermanlee4, andrewkr, yoshinorim, jkedgar, dhruba
Differential Revision: https://reviews.facebook.net/D64701
Summary: Use ImmutableDBOptions/MutableDBOptions internally and DBOptions only for user-facing APIs. MutableDBOptions is barely a placeholder for now. I'll start to move options to MutableDBOptions in following diffs.
Test Plan:
make all check
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D64065
Summary:
* Change constructor of MutableCFOptions to depends only on ColumnFamilyOptions.
* Move `max_subcompactions`, `compaction_options_fifo` and `compaction_pri` to ImmutableCFOptions to make it clear that they are immutable.
Test Plan: existing unit tests.
Reviewers: yhchiang, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D63945
Summary: Add option write_buffer_manager to help users control total memory spent on memtables across multiple DB instances.
Test Plan: Add a new unit test.
Reviewers: yhchiang, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: adela, benj, sumeet, muthu, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59925
Summary:
memtable_prefix_bloom_probes is not a critical option. Remove it to reduce number of options.
It's easier for users to make mistakes with memtable_prefix_bloom_bits, turn it to memtable_prefix_bloom_bits_ratio
Test Plan: Run all existing tests
Reviewers: yhchiang, igor, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: gunnarku, yoshinorim, MarkCallaghan, leveldb, andrewkr, dhruba
Differential Revision: https://reviews.facebook.net/D59199
Summary: Backup options file to private directory
Test Plan:
backupable_db_test.cc, BackupOptions
Modify DB options by calling OpenDB for 3 times. Check the latest options file is in the right place. Also check no redundent files are backuped.
Reviewers: andrewkr
Reviewed By: andrewkr
Subscribers: leveldb, dhruba, andrewkr
Differential Revision: https://reviews.facebook.net/D59373
Summary: Make CompactionOptionsFIFO a part of mutable_cf_options
Test Plan: UT
Reviewers: sdong
Reviewed By: sdong
Subscribers: andrewkr, lgalanis, dhruba
Differential Revision: https://reviews.facebook.net/D58653
Summary:
This is needed so we can measure compression ratio improvements
achieved by D52287.
The property compares raw data size against the total file size for a given
level. If the level is empty it should return 0.0.
Test Plan: new unit test
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: andrewkr, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D56967
Summary:
When subcompaction is used, all subcompactions share the same Compaction
pointer in CompactionJob while each subcompaction all keeps their mutable
stats in SubcompactionState. However, there're still some mutable part
that is currently store in the shared Compaction pointer.
This patch makes two changes:
1. Make the shared Compaction pointer const so that it can never be modified
during the compaction.
2. Move necessary states from Compaction to SubcompactionState.
3. Make functions of Compaction const if the function does not modify
its internal state.
Test Plan: rocksdb and MyRocks test
Reviewers: sdong, kradhakrishnan, andrewkr, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: andrewkr, dhruba, yoshinorim, gunnarku, leveldb
Differential Revision: https://reviews.facebook.net/D55923
Summary:
- Keep track of obsolete manifests in VersionSet
- Updated FindObsoleteFiles() to put obsolete manifests in the JobContext for later use by PurgeObsoleteFiles()
- Added test case that verifies a stale manifest is deleted by a non-full purge
Test Plan:
$ ./backupable_db_test --gtest_filter=BackupableDBTest.ChangeManifestDuringBackupCreation
Reviewers: IslamAbdelRahman, yoshinorim, sdong
Reviewed By: sdong
Subscribers: andrewkr, leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D55269
Summary:
Following up on D53493, we can still enable the filter-skipping
optimization for last file in L0. It's correct to assume the key will be present
in the last L0 file when we're hit-optimized and L0 is deepest.
The FilePicker encapsulates the state for traversing each level's files, so I
needed to make it expose whether the returned file is last in its level.
Test Plan:
verified below test fails before this patch and passes afterwards.
The change to how the test memtable is populated is needed so file 1 has keys
(0, 30, 60), file 2 has keys (10, 40, 70), etc.
$ ./db_universal_compaction_test --gtest_filter=UniversalCompactionNumLevels/DBTestUniversalCompaction.OptimizeFiltersForHits/*
Reviewers: sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D53583
Summary: Revert the functionaility of D7809 (but I'm keeping the logging and test code). We decided it was dangerous to ignore sync failures based on attempting to read the data written. The read does not tell us whether the data was synced.
Test Plan: There was no test for the particular functionaility that was reverted. Keeping the test code from D7809 that tests whether we set the DB to be readonly when paranoid checks are enabled.
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D52989
Summary: It's usually hard for users to set a value of options.delayed_write_rate. With this diff, after slowdown condition triggers, we greedily reduce write rate if estimated pending compaction bytes increase. If estimated compaction pending bytes drop, we increase the write rate.
Test Plan:
Add a unit test
Test with db_bench setting:
TEST_TMPDIR=/dev/shm/ ./db_bench --benchmarks=fillrandom -num=10000000 --soft_pending_compaction_bytes_limit=1000000000 --hard_pending_compaction_bytes_limit=3000000000 --delayed_write_rate=100000000
and make sure without the commit, write stop will happen, but with the commit, it will not happen.
Reviewers: igor, anthony, rven, yhchiang, kradhakrishnan, IslamAbdelRahman
Reviewed By: IslamAbdelRahman
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D52131
Summary:
When Get() or NewIterator() trigger file loads, skip caching the filter block if
(1) optimize_filters_for_hits is set and (2) the file is on the bottommost
level. Also skip checking filters under the same conditions, which means that
for a preloaded file or a file that was trivially-moved to the bottom level, its
filter block will eventually expire from the cache.
- added parameters/instance variables in various places in order to propagate the config ("skip_filters") from version_set to block_based_table_reader
- in BlockBasedTable::Rep, this optimization prevents filter from being loaded when the file is opened simply by setting filter_policy = nullptr
- in BlockBasedTable::Get/BlockBasedTable::NewIterator, this optimization prevents filter from being used (even if it was loaded already) by setting filter = nullptr
Test Plan:
updated unit test:
$ ./db_test --gtest_filter=DBTest.OptimizeFiltersForHits
will also run 'make check'
Reviewers: sdong, igor, paultuckfield, anthony, rven, kradhakrishnan, IslamAbdelRahman, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D51633
Summary:
Currently, transactions can fail even if there is no actual write conflict. This is due to relying on only the memtables to check for write-conflicts. Users have to tune memtable settings to try to avoid this, but it's hard to figure out exactly how to tune these settings.
With this diff, TransactionDB will use both memtables and SST files to determine if there are any write conflicts. This relies on the fact that BlockBasedTable stores sequence numbers for all writes that happen after any open snapshot. Also, D50295 is needed to prevent SingleDelete from disappearing writes (the TODOs in this test code will be fixed once the other diff is approved and merged).
Note that Optimistic transactions will still rely on tuning memtable settings as we do not want to read from SST while on the write thread. Also, memtable settings can still be used to reduce how often TransactionDB needs to read SST files.
Test Plan: unit tests, db bench
Reviewers: rven, yhchiang, kradhakrishnan, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb, yoshinorim
Differential Revision: https://reviews.facebook.net/D50475
Summary: Deprecate options.soft_rate_limit, which is hard to tune, with options.soft_pending_compaction_bytes_limit, which would trigger the slowdown if estimated pending compaction bytes exceeds the threshold. The hope is to make it more striaght-forward to tune.
Test Plan: Modify DBTest.SoftLimit to cover options.soft_pending_compaction_bytes_limit instead; run all unit tests.
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, igor, anthony
Reviewed By: anthony
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D51117
Summary: crash_test sometimes fails, hitting the add file overlapping assert. Add information in info logs help us to find the bug.
Test Plan: Run all test suites. Do some manual tests to make sure printing is correct.
Reviewers: kradhakrishnan, yhchiang, anthony, IslamAbdelRahman, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D49017
Summary: As above.
Test Plan: USE_CLANG=1 make check -j
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48981
Summary: In MyRocks, it is sometimes important to get propeties only for the subset of the database. This diff implements the API in RocksDB.
Test Plan: ran the GetPropertiesOfTablesInRange
Reviewers: rven, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D48651
Summary:
Separate a new class InternalIterator from class Iterator, when the look-up is done internally, which also means they operate on key with sequence ID and type.
This change will enable potential future optimizations but for now InternalIterator's functions are still the same as Iterator's.
At the same time, separate the cleanup function to a separate class and let both of InternalIterator and Iterator inherit from it.
Test Plan: Run all existing tests.
Reviewers: igor, yhchiang, anthony, kradhakrishnan, IslamAbdelRahman, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D48549
Summary:
Handle SST files with both ".sst" and ".ldb" suffix.
This enables user to migrate from leveldb to rocksdb.
Test Plan:
Added unit test with DB operating on SSTs with names schema.
See db/dc_test.cc:SSTsWithLdbSuffixHandling for details
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D48003
Summary:
Add options.compaction_pri, which specifies the policy about which file to compact first.
kCompactionPriByLargestSeq will compact oldest files first.
Verified the behavior in db_bench but did not write unit tests yet. Also need to make it settable through option string and dynamically changeable.
Test Plan: Will write unit tests
Reviewers: igor, rven, anthony, kradhakrishnan, IslamAbdelRahman, yhchiang, MarkCallaghan
Reviewed By: yhchiang
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D45951
Summary:
Up to this point, the subcompactions that make up a compaction
job have been divided based on the key range of the L1 files, and each
subcompaction has handled the key range of only one file. However
DBOption.max_subcompactions allows the user to designate how many
subcompactions at most to perform. This patch updates the
CompactionJob::GetSubcompactionBoundaries() to determine these
divisions accordingly based on that option and other input/system factors.
The current approach orders the starting and/or ending keys of certain
compaction input files and then generates a histogram to approximate the
size covered by the key range between each consecutive pair of keys. Then
it groups these ranges into groups so that the sizes are approximately equal
to one another. The approach has also been adapted to work for universal
compaction as well instead of just for level-based compaction as it was before.
These subcompactions are then executed in parallel by locally spawning
threads, one for each. The results are then aggregated and the compaction
completed.
Test Plan: make all && make check
Reviewers: yhchiang, anthony, igor, noetzli, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D43269
Summary:
This patch adds "rocksdb.aggregated-table-properties"
and "rocksdb.aggregated-table-properties-at-levelN", the former
returns the aggreated table properties of a column family,
while the later returns the aggregated table properties
of the specified level N.
Test Plan: Added tests in db_test
Reviewers: igor, sdong, IslamAbdelRahman, anthony
Reviewed By: anthony
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D45087
Summary:
Add a counter of estimated bytes the DB needs to compact for all the compactions to finish. Expose it as a DB Property.
In the future, we can use threshold of this counter to replace soft rate limit and hard rate limit. A single threshold of estimated compaction debt in bytes will be easier for users to reason about when should slow down and stopping than more abstract soft and hard rate limits.
Test Plan: Add unit tests
Reviewers: IslamAbdelRahman, yhchiang, rven, kradhakrishnan, anthony, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D44205
Summary: Add a new DB property that calculate the total size of files used by all RocksDB Versions
Test Plan: Unittests for the new property
Reviewers: igor, yhchiang, anthony, rven, kradhakrishnan, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D44799
Summary:
UpdateAccumulatedStats() is used to optimize compaction decision
esp. when the number of deletion entries are high, but this function
can slowdown DBOpen esp. in disk environment.
This patch adds DBOptions::skip_sats_update_on_db_open, which skips
UpdateAccumulatedStats() in DB::Open() time when it's set to true.
Test Plan: Add DBCompactionTest.SkipStatsUpdateTest
Reviewers: igor, anthony, IslamAbdelRahman, sdong
Reviewed By: sdong
Subscribers: tnovak, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D42843
Summary:
Fixes T6548822. Added a new function for estimating the size of the live data
as proposed in the task. The value can be accessed through the property
rocksdb.estimate-live-data-size.
Test Plan:
There are two unit tests in version_set_test and a simple test in db_test.
make version_set_test && ./version_set_test;
make db_test && ./db_test gtest_filter=GetProperty
Reviewers: rven, igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41493
Summary:
When we first started, max_background_flushes was 0 by default and compaction thread was executing flushes (since there was no flush thread). Then, we switched the default max_background_flushes to 1. However, we still support the case where there is no flush thread and flushes are done in compaction. This is making our code a bit more complicated. By not supporting this use-case we can make our code simpler.
We have a special case that when you set max_background_flushes to 0, we
schedule the flush to execute on the compaction thread.
Test Plan: make check (there might be some unit tests that depend on this behavior)
Reviewers: IslamAbdelRahman, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D41931
Summary:
This fixes the following scenario we've hit:
- we reached max_total_wal_size, created a new wal and scheduled flushing all memtables corresponding to the old one,
- before the last of these flushes started its column family was dropped; the last background flush call was a no-op; no one removed the old wal from alive_logs_,
- hours have passed and no flushes happened even though lots of data was written; data is written to different column families, compactions are disabled; old column families are dropped before memtable grows big enough to trigger a flush; the old wal still sits in alive_logs_ preventing max_total_wal_size limit from kicking in,
- a few more hours pass and we run out disk space because of one huge .log file.
Test Plan: `make check`; backported the new test, checked that it fails without this diff
Reviewers: igor
Reviewed By: igor
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D40893
Summary:
This diff updates the logic of how we do trivial move, now trivial move can run on any number of files in input level as long as they are not overlapping
The conditions for trivial move have been updated
Introduced conditions:
- Trivial move cannot happen if we have a compaction filter (except if the compaction is not manual)
- Input level files cannot be overlapping
Removed conditions:
- Trivial move only run when the compaction is not manual
- Input level should can contain only 1 file
More context on what tests failed because of Trivial move
```
DBTest.CompactionsGenerateMultipleFiles
This test is expecting compaction on a file in L0 to generate multiple files in L1, this test will fail with trivial move because we end up with one file in L1
```
```
DBTest.NoSpaceCompactRange
This test expect compaction to fail when we force environment to report running out of space, of course this is not valid in trivial move situation
because trivial move does not need any extra space, and did not check for that
```
```
DBTest.DropWrites
Similar to DBTest.NoSpaceCompactRange
```
```
DBTest.DeleteObsoleteFilesPendingOutputs
This test expect that a file in L2 is deleted after it's moved to L3, this is not valid with trivial move because although the file was moved it is now used by L3
```
```
CuckooTableDBTest.CompactionIntoMultipleFiles
Same as DBTest.CompactionsGenerateMultipleFiles
```
This diff is based on a work by @sdong https://reviews.facebook.net/D34149
Test Plan: make -j64 check
Reviewers: rven, sdong, igor
Reviewed By: igor
Subscribers: yhchiang, ott, march, dhruba, sdong
Differential Revision: https://reviews.facebook.net/D34797
Summary:
CPU profiling reveals GetApproximateSizes as a bottleneck for performance. The current implementation is sub-optimal, it scans every file in every level to compute the result.
We can take advantage of the fact that all levels above 0 are sorted in the increasing order of key ranges and use binary search to locate the starting index. This can reduce the number of comparisons required to compute the result.
Test Plan: We have good test coverage. Run the tests.
Reviewers: sdong, igor, rven, dynamike
Subscribers: dynamike, maykov, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37755
Summary:
Some Mongo+Rocks datasets in Parse's environment are not doing compactions very frequently. During the quiet period (with no IO), we'd like to schedule compactions so that our reads become faster. Also, aggressively compacting during quiet periods helps when write bursts happen. In addition, we also want to compact files that are containing deleted key ranges (like old oplog keys).
All of this is currently not possible with CompactRange() because it's single-threaded and blocks all other compactions from happening. Running CompactRange() risks an issue of blocking writes because we generate too much Level 0 files before the compaction is over. Stopping writes is very dangerous because they hold transaction locks. We tried running manual compaction once on Mongo+Rocks and everything fell apart.
MarkForCompaction() solves all of those problems. This is very light-weight manual compaction. It is lower priority than automatic compactions, which means it shouldn't interfere with background process keeping the LSM tree clean. However, if no automatic compactions need to be run (or we have extra background threads available), we will start compacting files that are marked for compaction.
Test Plan: added a new unit test
Reviewers: yhchiang, rven, MarkCallaghan, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D37083
Summary:
With this change, we use L1 and up to store compaction outputs in universal compaction.
The compaction pick logic stays the same. Outputs are stored in the largest "level" as possible.
If options.num_levels=1, it behaves all the same as now.
Test Plan:
1) convert most of existing unit tests for universal comapaction to include the option of one level and multiple levels.
2) add a unit test to cover parallel compaction in universal compaction and run it in one level and multiple levels
3) add unit test to migrate from multiple level setting back to one level setting
4) add a unit test to insert keys to trigger multiple rounds of compactions and verify results.
Reviewers: rven, kradhakrishnan, yhchiang, igor
Reviewed By: igor
Subscribers: meyering, leveldb, MarkCallaghan, dhruba
Differential Revision: https://reviews.facebook.net/D34539
Summary:
We have addded new stats and perf_context for measuring the merge and filter operation time consumption.
We have bounded all the merge operations within the GUARD statment and collected the total time for these operations in the DB.
Test Plan: WIP
Reviewers: rven, yhchiang, kradhakrishnan, igor, sdong
Reviewed By: sdong
Subscribers: dhruba
Differential Revision: https://reviews.facebook.net/D34377
Summary:
When having fixed max_bytes_for_level_base, the ratio of size of largest level and the second one can range from 0 to the multiplier. This makes LSM tree frequently irregular and unpredictable. It can also cause poor space amplification in some cases.
In this improvement (proposed by Igor Kabiljo), we introduce a parameter option.level_compaction_use_dynamic_max_bytes. When turning it on, RocksDB is free to pick a level base in the range of (options.max_bytes_for_level_base/options.max_bytes_for_level_multiplier, options.max_bytes_for_level_base] so that real level ratios are close to options.max_bytes_for_level_multiplier.
Test Plan: New unit tests and pass tests suites including valgrind.
Reviewers: MarkCallaghan, rven, yhchiang, igor, ikabiljo
Reviewed By: ikabiljo
Subscribers: yoshinorim, ikabiljo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31437
Summary:
When using latest clang (3.6 or 3.7/trunck) rocksdb is failing with many errors. Almost all of them are missing override errors. This diff adds missing override keyword. No manual changes.
Prerequisites: bear and clang 3.5 build with extra tools
```lang=bash
% USE_CLANG=1 bear make all # generate a compilation database http://clang.llvm.org/docs/JSONCompilationDatabase.html
% clang-modernize -p . -include . -add-override
% make format
```
Test Plan:
Make sure all tests are passing.
```lang=bash
% #Use default fb code clang.
% make check
```
Verify less error and no missing override errors.
```lang=bash
% # Have trunk clang present in path.
% ROCKSDB_NO_FBCODE=1 CC=clang CXX=clang++ make
```
Reviewers: igor, kradhakrishnan, rven, meyering, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D34077
Summary: Add a DB property about live versions. It can be helpful to figure out whether there are files not live but not yet deleted, in some use cases.
Test Plan: make all check
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33327
Summary: For description of the bug, see comment in db_test. The fix is pretty straight forward.
Test Plan: added unit test. eventually we need better testing of FOF/POF process.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D33081
Summary:
Add a counter for collecting the wait time on db mutex.
Also add MutexWrapper and CondVarWrapper for measuring wait time.
Test Plan:
./db_test
export ROCKSDB_TESTS=MutexWaitStats
./db_test
verify stats output using db_bench
make clean
make release
./db_bench --statistics=1 --benchmarks=fillseq,readwhilewriting --num=10000 --threads=10
Sample output:
rocksdb.db.mutex.wait.micros COUNT : 7546866
Reviewers: MarkCallaghan, rven, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32787
Summary: Added requirement that ComputeCompactionScore() be executed in mutex, since it's accessing being_compacted bool, which can be mutated by other threads. Also added more comments about thread safety of FileMetaData, since it was a bit confusing. However, it seems that FileMetaData doesn't have data races (except being_compacted)
Test Plan: Ran 100 ConvertCompactionStyle tests with thread sanitizer. On master -- some failures. With this patch -- none.
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32283
Summary:
Introduces a new class for managing write buffer memory across column
families. We supplement ColumnFamilyOptions::write_buffer_size with
ColumnFamilyOptions::write_buffer, a shared pointer to a WriteBuffer
instance that enforces memory limits before flushing out to disk.
Test Plan: Added SharedWriteBuffer unit test to db_test.cc
Reviewers: sdong, rven, ljin, igor
Reviewed By: igor
Subscribers: tnovak, yhchiang, dhruba, xjin, MarkCallaghan, yoshinorim
Differential Revision: https://reviews.facebook.net/D22581
Summary:
Move NeedsCompaction() from VersionStorageInfo to CompactionPicker
to allow different compaction strategy to have their own way to
determine whether doing compaction is necessary.
When compaction style is set to kCompactionStyleNone, then
NeedsCompaction() will always return false.
Test Plan:
export ROCKSDB_TESTS=Compact
./db_test
Reviewers: ljin, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28719
Summary: I found that db_stress sometimes segfault on my machine. Fix the bug.
Test Plan: make all check. Run db_stress
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28803
Summary:
We need to turn on -Wshorten-64-to-32 for mobile. See D1671432 (internal phabricator) for details.
This diff turns on the warning flag and fixes all the errors. There were also some interesting errors that I might call bugs, especially in plain table. Going forward, I think it makes sense to have this flag turned on and be very very careful when converting 64-bit to 32-bit variables.
Test Plan: compiles
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: yhchiang
Subscribers: bobbaldwin, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28689
Summary: I mistakenly changed the behavior to ++next_file_number_ instead of next_file_number_++, as it should have been: 344edbb044/db/version_set.h (L539)
Test Plan: none. not sure if this would break anything. It's just different behavior, so I'd rather not risk
Reviewers: ljin, rven, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28557
Summary: Based on @sdong's feedback in the diff, we shouldn't keep db_mutex in CompactionJob's state. This diff removes db_mutex from CompactionJob state, by making next_file_number_ atomic. That way we only need to pass the lock to InstallCompactionResults() because of LogAndApply()
Test Plan: make check
Reviewers: ljin, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: sdong, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28491
Summary:
This diff adds three sets of APIs to RocksDB.
= GetColumnFamilyMetaData =
* This APIs allow users to obtain the current state of a RocksDB instance on one column family.
* See GetColumnFamilyMetaData in include/rocksdb/db.h
= EventListener =
* A virtual class that allows users to implement a set of
call-back functions which will be called when specific
events of a RocksDB instance happens.
* To register EventListener, simply insert an EventListener to ColumnFamilyOptions::listeners
= CompactFiles =
* CompactFiles API inputs a set of file numbers and an output level, and RocksDB
will try to compact those files into the specified level.
= Example =
* Example code can be found in example/compact_files_example.cc, which implements
a simple external compactor using EventListener, GetColumnFamilyMetaData, and
CompactFiles API.
Test Plan:
listener_test
compactor_test
example/compact_files_example
export ROCKSDB_TESTS=CompactFiles
db_test
export ROCKSDB_TESTS=MetaData
db_test
Reviewers: ljin, igor, rven, sdong
Reviewed By: sdong
Subscribers: MarkCallaghan, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D24705
Summary:
Here's a prototype of redesigning pending_outputs_. This way, we don't have to expose pending_outputs_ to other classes (CompactionJob, FlushJob, MemtableList). DBImpl takes care of it.
Still have to write some comments, but should be good enough to start the discussion.
Test Plan: make check, will also run stress test
Reviewers: ljin, sdong, rven, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28353
Summary: Enforce the accessier naming convention in functions in version_set.h
Test Plan: make all check
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D28143
Summary: as title
Test Plan: make release
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28053
Summary:
Rename Version::Builder to VersionBuilder and expose its definition to a header.
Make VerisonBuilder not reference Version or ColumnFamilyData, only working with VersionStorageInfo.
Add version_builder_test which has a simple test.
Test Plan: make all check
Reviewers: rven, yhchiang, igor, ljin
Reviewed By: igor
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27969
Summary:
Make compaction picker easier to test.
The basic idea is to separate a minimum subcomponent of Version to VersionStorageInfo, which just responsible to LSM tree. A stub VersionStorageInfo can then be easily created and passed into compaction picker so that we can check the outputs.
It now passes most tests. Still two things need to be done:
(1) deal with the FIFO compaction's file size.
(2) write an example test to make sure the interface can do the job.
Add a compaction_picker_test to make sure compaction picker codes can be easily unit tested.
Test Plan:
Pass all unit tests and compaction_picker_test
Reviewers: yhchiang, rven, igor, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D27639
Summary: No need to expose them in .h
Test Plan: make release
Reviewers: igor, yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27645
Summary: as title
Test Plan:
make release
will run full test on all stacked diffs
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27597
Summary: as title
Test Plan:
make release
will run full test on all stacked diffs before committing
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27591
Summary:
We have several different types of data structures for file information.
FileLevel is kinda of confusing since it only contains file range and
fd. Rename it to LevelFilesBrief to make it clear.
Unfriend CompactedDBImpl as a by product
Test Plan:
make release / make all
will run full test with all stacked diffs
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27585
Summary: as title
Test Plan:
make release
I will run make all check for all stacked diffs before commit
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27573
Summary: as title
Test Plan: running make all check
Reviewers: sdong, yhchiang, rven, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27549
Summary:
This diff speeds up DB::Open() and Version creation by limiting the number of FileMetaData initialization. The behavior of Version::UpdateAccumulatedStats() is changed as follows:
* It only initializes the first 20 uninitialized FileMetaData from file. This guarantees the size of the latest 20 files will always be compensated when they have any deletion entries. Previously it may initialize all FileMetaData by loading all files at DB::Open().
* In case none the first 20 files has any data entry, UpdateAccumulatedStats() will initialize the FileMetaData of the oldest file.
Test Plan: db_test
Reviewers: igor, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24255
Summary:
make compaction related options changeable. Most of changes are tedious,
following the same convention: grabs MutableCFOptions at the beginning
of compaction under mutex, then pass it throughout the job and register
it in SuperVersion at the end.
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23349
Summary:
Intead of passing callback function pointer and its arg on Table::Get()
interface, passing GetContext. This makes the interface cleaner and
possible better perf. Also adding a fast pass for SaveValue()
Test Plan: make all check
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24057
Summary:
Add a CompactedDBImpl that will enabled when calling OpenForReadOnly()
and the DB only has one level (>0) of files. As a performan comparison,
CuckooTable performs 2.1M/s with CompactedDBImpl vs. 1.78M/s with
ReadOnlyDBImpl.
Test Plan: db_bench
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23553
Summary:
Now the file summary is too small for printing. Enlarge it.
To enable it, allow to pass a size to log buffer.
Test Plan:
Add a unit test.
make all check
Reviewers: ljin, yhchiang
Reviewed By: yhchiang
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21723
Summary: as title
Test Plan: make release
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23007
Summary:
Introducing WriteController, which is a source of truth about per-DB write delays. Let's define an DB epoch as a period where there are no flushes and compactions (i.e. new epoch is started when flush or compaction finishes). Each epoch can either:
* proceed with all writes without delay
* delay all writes by fixed time
* stop all writes
The three modes are recomputed at each epoch change (flush, compaction), rather than on every write (which is currently the case).
When we have a lot of column families, our current pull behavior adds a big overhead, since we need to loop over every column family for every write. With new push model, overhead on Write code-path is minimal.
This is just the start. Next step is to also take care of stalls introduced by slow memtable flushes. The final goal is to eliminate function MakeRoomForWrite(), which currently needs to be called for every column family by every write.
Test Plan: make check for now. I'll add some unit tests later. Also, perf test.
Reviewers: dhruba, yhchiang, MarkCallaghan, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22791
Summary:
Simply code by removing code path which does not use Arena
from NewInternalIterator
Test Plan:
make all check
make valgrind_check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22395
Summary:
Add a DB Property "rocksdb.estimate-table-readers-mem" to return estimated memory usage by all loaded table readers, other than allocated from block cache.
Refactor the property codes to allow getting property from a version, with DB mutex not acquired.
Test Plan: Add several checks of this new property in existing codes for various cases.
Reviewers: yhchiang, ljin
Reviewed By: ljin
Subscribers: xjin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D20733
Summary: Add a DB property of estimated number of live keys, by adding number of entries of all mem tables and all files, subtracted by all deletions in all files.
Test Plan: Add the case in unit tests
Reviewers: hobbymanyp, ljin
Reviewed By: ljin
Subscribers: MarkCallaghan, yoshinorim, leveldb, igor, dhruba
Differential Revision: https://reviews.facebook.net/D20631
Summary:
Use FileLevel in LevelFileNumIterator, thus use new version of findFile.
Old version of findFile function is deleted.
Write a function in version_set.cc to generate FileLevel from files_.
Add GenerateFileLevelTest in version_set_test.cc
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: igor, dhruba
Differential Revision: https://reviews.facebook.net/D19659
Summary:
Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena
Thus increase the file meta data locality, speed up "Get" and "FindFile"
benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing"
benchmark command:
./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920
Read Random:
From 1.8363 ms/op, improve to 1.7587 ms/op.
Read while writing:
From 2.985 ms/op, improve to 2.924 ms/op.
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, igor
Differential Revision: https://reviews.facebook.net/D19419
Summary:
This patch include two fixes:
1. newly created Version will now takes the aggregated stats for average-value-size from the latest Version.
2. compensated size of a file is now computed only for newly created / loaded file, this addresses the issue where files are already sorted by their compensated file size but might sometimes observe some out-of-order due to later update on compensated file size.
Test Plan:
export ROCKSDB_TESTS=CompactionDele
./db_test
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19557
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary: files_by_size_ is sorted by time in case of universal compaction. However, Version::files_ is also sorted by time. So no need for files_by_size_
Test Plan:
1) make check with the change
2) make check with `assert(last_index == c->input_version_->files_[level].size() - 1);` in compaction picker
Reviewers: dhruba, haobo, yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19125
Summary:
This diff allows compaction to reclaim storage more effectively.
In the current design, compactions are mainly triggered based on
the file sizes. However, since deletion entries does not have
value, files which have many deletion entries are less likely
to be compacted. As a result, it may took a while to make
deletion entries to be compacted.
This diff address issue by compensating the size of deletion
entries during compaction process: the size of each deletion
entry in the compaction process is augmented by 2x average
value size. The diff applies to both leveled and universal
compacitons.
Test Plan:
develop CompactionDeletionTrigger
make db_test
./db_test
Reviewers: haobo, igor, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19029
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary:
https://reviews.facebook.net/D17205 removed the logic of skipping file key range check when there are less than 3 level 0 files. This patch brings it back.
Other than that, add another small optimization to avoid to check all the levels if most higher levels don't have any file.
Test Plan: make all check
Reviewers: ljin
Reviewed By: ljin
Subscribers: yhchiang, igor, haobo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19035
Summary: as title
Test Plan:
db_bench
the initial result is very promising. I will post results of complete
runs
Reviewers: dhruba, haobo, sdong, igor
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18867
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.
Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: leveldb, dhruba, yhchiang, igor
Differential Revision: https://reviews.facebook.net/D18513
Summary:
Forward iterator puts everything together in a flat structure instead of
a hierarchy of nested iterators. this should simplify the code and
provide better performance. It also enables more optimization since all
information are accessiable in one place.
Init evaluation shows about 6% improvement
Test Plan: db_test and db_bench
Reviewers: dhruba, igor, tnovak, sdong, haobo
Reviewed By: haobo
Subscribers: sdong, leveldb
Differential Revision: https://reviews.facebook.net/D18795
Summary:
Introducing new compaction style -- FIFO.
FIFO compaction style has write amplification of 1 (+1 for WAL) and it deletes the oldest files when the total DB size exceeds pre-configured values.
FIFO compaction style is suited for storing high-frequency event logs.
Test Plan: Added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
Subscribers: alberts, leveldb
Differential Revision: https://reviews.facebook.net/D18765
Summary:
As a follow-up diff for https://reviews.facebook.net/D17805, add
optimization to check PrefixMayMatch on Seek()
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17853
Summary:
The file tree structure in Version is prebuilt and the range of each file is known.
On the Get() code path, we do binary search in FindFile() by comparing
target key with each file's largest key and also check the range for each L0 file.
With some pre-calculated knowledge, each key comparision that has been done can serve
as a hint to narrow down further searches:
(1) If a key falls within a L0 file's range, we can safely skip the next
file if its range does not overlap with the current one.
(2) If a key falls within a file's range in level L0 - Ln-1, we should only
need to binary search in the next level for files that overlap with the current one.
(1) will be able to skip some files depending one the key distribution.
(2) can greatly reduce the range of binary search, especially for bottom
levels, given that one file most likely only overlaps with N files from
the level below (where N is max_bytes_for_level_multiplier). So on level
L, we will only look at ~N files instead of N^L files.
Some inital results: measured with 500M key DB, when write is light (10k/s = 1.2M/s), this
improves QPS ~7% on top of blocked bloom. When write is heavier (80k/s =
9.6M/s), it gives us ~13% improvement.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17205
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17739
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
Summary:
As it turns out, we need the call to ComputeCompactionScore (previously: Finalize) in CompactionPicker.
The issue caused a deadlock in db_stress: http://ci-builds.fb.com/job/rocksdb_crashtest/290/console
The last two lines before a deadlock were:
2014/03/18-22:43:41.481029 7facafbee700 (Original Log Time 2014/03/18-22:43:41.480989) Compaction nothing to do
2014/03/18-22:43:41.481041 7faccf7fc700 wait for fewer level0 files...
"Compaction nothing to do" and other thread waiting for fewer level0 files. Hm hm.
I moved the pre-sorting to SaveTo, which should fix both the original and the new issue.
Test Plan: make check for now, will run db_stress in jenkins
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17037
Summary:
Finalize re-sorts (read: mutates) the files_ in Version* and it is called by CompactionPicker during normal runtime. At the same time, this same Version* lives in the SuperVersion* and is accessed without the mutex in GetImpl() code path.
Mutating the files_ in one thread and reading the same files_ in another thread is a bad idea. It caused this issue: http://ci-builds.fb.com/job/rocksdb_crashtest/285/console
Long-term, we need to be more careful with method contracts and clearly document what state can be mutated when. Now that we are much faster because we don't lock in GetImpl(), we keep running into data races that were not a problem before when we were slower. db_stress has been very helpful in detecting those.
Short-term, I removed Finalize() from CompactionPicker.
Note: I believe this is an issue in current 2.7 version running in production.
Test Plan:
make check
Will also run db_stress to see if issue is gone
Reviewers: sdong, ljin, dhruba, haobo
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16983
Summary:
When the manifest is getting rolled the following happens:
1) manifest_file_number_ is assigned to a new manifest number (even though the old one is still current)
2) mutex is unlocked
3) SetCurrentFile() creates temporary file manifest_file_number_.dbtmp
4) SetCurrentFile() renames manifest_file_number_.dbtmp to CURRENT
5) mutex is locked
If FindObsoleteFiles happens between (3) and (4) it will:
1) Delete manifest_file_number_.dbtmp (because it's not in pending_outputs_)
2) Delete old manifest (because the manifest_file_number_ already points to a new one)
I introduce the concept of prev_manifest_file_number_ that will avoid the race condition.
However, we should discuss the future of MANIFEST file rolling. We found some race conditions with it last week and who knows how many more are there. Nobody is using it in production because we don't trust the implementation. Should we even support it?
Test Plan: make check
Reviewers: ljin, dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16929
Summary: Moved LogBuffer class to an internal header. Removed some unneccesary indirection. Enabled log buffer for BackgroundCallFlush. Forced log buffer flush right after Unlock to improve time ordering of info log.
Test Plan: make check; db_bench compare LOG output
Reviewers: sdong
Reviewed By: sdong
CC: leveldb, igor
Differential Revision: https://reviews.facebook.net/D16707
Summary: Now while the background thread is picking compactions, it writes out multiple info_logs, especially for universal compaction, which introduces a chance of waiting log writing in mutex, which is bad. To remove this risk, write all those info logs to a buffer and flush it after releasing the mutex.
Test Plan:
make all check
check the log lines while running some tests that trigger compactions.
Reviewers: haobo, igor, dhruba
Reviewed By: dhruba
CC: i.am.jin.lei, dhruba, yhchiang, leveldb, nkg-
Differential Revision: https://reviews.facebook.net/D16515
Summary:
I though I might get away with as little changes to LogAndApply() as possible. It turns out this is not the case.
This diff introduces different behavior of LogAndApply() for three cases:
1. column family add
2. column family drop
3. no-column family manipulation
(1) and (2) don't support group commit yet.
There were a lot of problems with old version od LogAndApply, detected by db_stress. The biggest was non-atomicity of manifest writes and metadata changes (i.e. if column family add is in manifest, it also has to be in in-memory data structure).
Test Plan: db_stress
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16491
Summary: New unit tests for column families
Test Plan: this is a test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16359
Summary:
* Added unit test that verifies that obsolete files are deleted.
* Advance log number for empty column family when cutting log file.
* MinLogNumber() bug fix! (caught by the new unit test)
Test Plan: unit test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16311
Summary: Provide a public API for users to access the table properties for each SSTable.
Test Plan: Added a unit tests to test the function correctness under differnet conditions.
Reviewers: haobo, dhruba, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16083
Summary:
The change to the public behavior:
* When opening a DB or creating new column family client gets a ColumnFamilyHandle.
* As long as column family handle is alive, client can do whatever he wants with it, even drop it
* Dropped column family can still be read from (using the column family handle)
* Added a new call CloseColumnFamily(). Client has to close all column families that he has opened before deleting the DB
* As soon as column family is closed, any calls to DB using that column family handle will fail (also any outstanding calls)
Internally:
* Ref-counting ColumnFamilyData
* New thread-safety for ColumnFamilySet
* Dropped column families are now completely dropped and their memory cleaned-up
Test Plan: added some tests to column_family_test
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16101
