Summary:
In the current trace_and replay, Get an WriteBatch are traced. This pull request track down the Seek() and SeekForPrev() to the trace file. <target_key, timestamp, column_family_id> are write to the file.
Replay of Iterator is not supported in the current implementation.
Tested with trace_analyzer.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4228
Differential Revision: D9201381
Pulled By: zhichao-cao
fbshipit-source-id: 6f9cc9cb3c20260af741bee065ec35c5c96354ab
Summary:
The pair of ROCKSDB_LITE condition inclusion is redundant, it is already inside the #ifndef ROCKSDB_LITE. Remove them to void confusion.
Tested by make asan_check.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4254
Differential Revision: D9281652
Pulled By: zhichao-cao
fbshipit-source-id: 06bf7641ede71391f21f6a3fe37fbd13f0e2a43a
Summary:
Given that index value is a BlockHandle, which is basically an <offset, size> pair we can apply delta encoding on the values. The first value at each index restart interval encoded the full BlockHandle but the rest encode only the size. Refer to IndexBlockIter::DecodeCurrentValue for the detail of the encoding. This reduces the index size which helps using the block cache more efficiently. The feature is enabled with using format_version 4.
The feature comes with a bit of cpu overhead which should be paid back by the higher cache hits due to smaller index block size.
Results with sysbench read-only using 4k blocks and using 16 index restart interval:
Format 2:
19585 rocksdb read-only range=100
Format 3:
19569 rocksdb read-only range=100
Format 4:
19352 rocksdb read-only range=100
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3983
Differential Revision: D8361343
Pulled By: maysamyabandeh
fbshipit-source-id: f882ee082322acac32b0072e2bdbb0b5f854e651
Summary:
In the past, we assume that a job modifies a single column family. Therefore, a job can create at most one superversion since each superversion corresponds to one column family. This assumption leads to the fact that a `JobContext` has only one member variable called `superversion_context`.
Now we want to support group flush of column families, indicating that each job can create multiple superversions. Therefore, we need to make the following change to accommodate this new feature.
Add a vector of `SuperVersionContext` to `JobContext` to support installing
superversions for multiple column families in one job context.
This PR is a subset of [PR 3752](https://github.com/facebook/rocksdb/pull/3752).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3949
Differential Revision: D8864895
Pulled By: riversand963
fbshipit-source-id: 5937a48817276370d3c8172db9c8aafc826d97ca
Summary:
A framework for tracing and replaying RocksDB operations.
A binary trace file is created by capturing the DB operations, and it can be replayed back at the same rate using db_bench.
- Column-families are supported
- Multi-threaded tracing is supported.
- TraceReader and TraceWriter are exposed to the user, so that tracing to various destinations can be enabled (say, to other messaging/logging services). By default, a FileTraceReader and FileTraceWriter are implemented to capture to a file and replay from it.
- This is not yet ideal to be enabled in production due to large performance overhead, but it can be safely tried out in a shadow setup, say, for analyzing RocksDB operations.
Currently supported DB operations:
- Writes:
-- Put
-- Merge
-- Delete
-- SingleDelete
-- DeleteRange
-- Write
- Reads:
-- Get (point lookups)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/3837
Differential Revision: D7974837
Pulled By: sagar0
fbshipit-source-id: 8ec65aaf336504bc1f6ed0feae67f6ed5ef97a72
Summary:
RocksDB used to store global_seqno in external SST files written by
SstFileWriter. During file ingestion, RocksDB uses `pwrite` to update the
`global_seqno`. Since random write is not supported in some non-POSIX compliant
file systems, external SST file ingestion is not supported on these file
systems. To address this limitation, we no longer update `global_seqno` during
file ingestion. Later RocksDB uses the MANIFEST and other information in table
properties to deduce global seqno for externally-ingested SST files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4172
Differential Revision: D8961465
Pulled By: riversand963
fbshipit-source-id: 4382ec85270a96be5bc0cf33758ca2b167b05071
Summary:
If crash happen after a hard link established, Recover function may reuse the file number that has already assigned to the internal file, and this will overwrite the external file. To protect the external file, we have to make sure the file number will never being reused.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4099
Differential Revision: D9034092
Pulled By: riversand963
fbshipit-source-id: 3f1a737440b86aa2ef01673e5013aacbb7c33e28
Summary:
995fcf7573 has a bug: ReleaseFileNumberFromPendingOutputs() added is not protected by the DB mutex. Fix it by grabbing the lock for this operation.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4189
Differential Revision: D9015447
Pulled By: siying
fbshipit-source-id: b8506e09a96c3f95a6fe32b5ca5fcdb9bee88937
Summary:
If bulkload fails for an input error, the pending output file number wasn't released. This bug can cause all future files with larger number than the current number won't be deleted, even they are compacted. This commit fixes the bug.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4145
Differential Revision: D8877900
Pulled By: siying
fbshipit-source-id: 080be92a23d43305ca1e13fe1c06eb4cd0b01466
Summary:
Prior to this PR, there was a race condition between `DBImpl::SetOptions` and `BackupEngine::CreateNewBackup`, as illustrated below.
```
Time thread 1 thread 2
| CreateNewBackup -> GetLiveFiles
| SetOptions -> RenameTempFileToOptionsFile
| SetOptions -> RenameTempFileToOptionsFile
| SetOptions -> RenameTempFileToOptionsFile // unlink oldest OPTIONS file
| copy the oldest OPTIONS // IO error!
V
```
Proposed fix is to check the value of `DBImpl::disable_obsolete_files_deletion_` before calling `DeleteObsoleteOptionsFiles`.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/4108
Differential Revision: D8796360
Pulled By: riversand963
fbshipit-source-id: 02045317f793ea4c7d4400a5bf333b8502fa3e82
Summary:
This adds a new WAL marker of type kTypeBeginUnprepareXID.
Also, DBImpl now contains a field called batch_per_txn (meaning one WriteBatch per transaction, or possibly multiple WriteBatches). This would also indicate that this DB is using WriteUnprepared policy.
Recovery code would be able to make use of this extra field on DBImpl in a separate diff. For now, it is just used to determine whether the WAL is compatible or not.
Closes https://github.com/facebook/rocksdb/pull/4069
Differential Revision: D8675099
Pulled By: lth
fbshipit-source-id: ca27cae1738e46d65f2bb92860fc759deb874749
Summary:
Currently, if RocksDB encounters errors during a write operation (user requested or BG operations), it sets DBImpl::bg_error_ and fails subsequent writes. This PR allows the DB to be resumed for certain classes of errors. It consists of 3 parts -
1. Introduce Status::Severity in rocksdb::Status to indicate whether a given error can be recovered from or not
2. Refactor the error handling code so that setting bg_error_ and deciding on severity is in one place
3. Provide an API for the user to clear the error and resume the DB instance
This whole change is broken up into multiple PRs. Initially, we only allow clearing the error for Status::NoSpace() errors during background flush/compaction. Subsequent PRs will expand this to include more errors and foreground operations such as Put(), and implement a polling mechanism for out-of-space errors.
Closes https://github.com/facebook/rocksdb/pull/3997
Differential Revision: D8653831
Pulled By: anand1976
fbshipit-source-id: 6dc835c76122443a7668497c0226b4f072bc6afd
Summary:
This is implemented by extending ReadCallback with another function `MaxUnpreparedSequenceNumber` which returns the largest visible sequence number for the current transaction, if there is uncommitted data written to DB. Otherwise, it returns zero, indicating no uncommitted data.
There are the places where reads had to be modified.
- Get and Seek/Next was just updated to seek to max(snapshot_seq, MaxUnpreparedSequenceNumber()) instead, and iterate until a key was visible.
- Prev did not need need updates since it did not use the Seek to sequence number optimization. Assuming that locks were held when writing unprepared keys, and ValidateSnapshot runs, there should only be committed keys and unprepared keys of the current transaction, all of which are visible. Prev will simply iterate to get the last visible key.
- Reseeking to skip keys optimization was also disabled for write unprepared, since it's possible to hit the max_skip condition even while reseeking. There needs to be some way to resolve infinite looping in this case.
Closes https://github.com/facebook/rocksdb/pull/3955
Differential Revision: D8286688
Pulled By: lth
fbshipit-source-id: 25e42f47fdeb5f7accea0f4fd350ef35198caafe
Summary:
We potentially need this information for tracing, profiling and diagnosis.
Closes https://github.com/facebook/rocksdb/pull/4026
Differential Revision: D8555214
Pulled By: riversand963
fbshipit-source-id: 4263e06c00b6d5410b46aa46eb4e358ff2161dd2
Summary:
Add a new DB property to DB::GetProperty(), which returns the option.statistics. Test is updated to pass.
Closes https://github.com/facebook/rocksdb/pull/3966
Differential Revision: D8311139
Pulled By: zhichao-cao
fbshipit-source-id: ea78f4727358c807b0e5a0ea62e09defb10ad9ac
Summary:
Currently it is not possible to change bloom filter config without restart the db, which is causing a lot of operational complexity for users.
This PR aims to make it possible to dynamically change bloom filter config.
Closes https://github.com/facebook/rocksdb/pull/3601
Differential Revision: D7253114
Pulled By: miasantreble
fbshipit-source-id: f22595437d3e0b86c95918c484502de2ceca120c
Summary:
log_ contract specifies that it should not be modified unless both mutex_ and log_write_mutex_ are held. log_.erase however does that with only holding mutex_. This causes a race condition with two_write_queues since logs_.back is read with holding only log_write_mutex_ (which is correct according to logs_ contract) but logs_.erase is called concurrently. This is probably the cause of logs_.back returning nullptr in https://github.com/facebook/rocksdb/issues/3852 although I could not reproduce it.
Fixes https://github.com/facebook/rocksdb/issues/3852
Closes https://github.com/facebook/rocksdb/pull/3859
Differential Revision: D8026103
Pulled By: maysamyabandeh
fbshipit-source-id: ee394e00fe4aa520d884c5ef87981e9d6b5ccb28
Summary:
Currently manual_wal_flush if set in the options will be used only for the wal files created during wal switch. The configuration thus does not affect the first wal file. The patch fixes that and also update the related unit tests.
This PR is built on top of https://github.com/facebook/rocksdb/pull/3756
Closes https://github.com/facebook/rocksdb/pull/3824
Differential Revision: D7909153
Pulled By: maysamyabandeh
fbshipit-source-id: 024ed99d2555db06bf096c902b998e432bb7b9ce
Summary:
Delete archive directory before WAL folder
since archive may be contained as a subfolder.
Also improve loop readability.
Closes https://github.com/facebook/rocksdb/pull/3797
Differential Revision: D7866378
Pulled By: riversand963
fbshipit-source-id: 0c45d97677ce6fbefa3f8d602ef5e2a2a925e6f5
Summary:
This patch record min log number to keep to the manifest while flushing SST files to ignore them and any WAL older than them during recovery. This is to avoid scenarios when we have a gap between the WAL files are fed to the recovery procedure. The gap could happen by for example out-of-order WAL deletion. Such gap could cause problems in 2PC recovery where the prepared and commit entry are placed into two separate WAL and gap in the WALs could result into not processing the WAL with the commit entry and hence breaking the 2PC recovery logic.
Before the commit, for 2PC case, we determined which log number to keep in FindObsoleteFiles(). We looked at the earliest logs with outstanding prepare entries, or prepare entries whose respective commit or abort are in memtable. With the commit, the same calculation is done while we apply the SST flush. Just before installing the flush file, we precompute the earliest log file to keep after the flush finishes using the same logic (but skipping the memtables just flushed), record this information to the manifest entry for this new flushed SST file. This pre-computed value is also remembered in memory, and will later be used to determine whether a log file can be deleted. This value is unlikely to change until next flush because the commit entry will stay in memtable. (In WritePrepared, we could have removed the older log files as soon as all prepared entries are committed. It's not yet done anyway. Even if we do it, the only thing we loss with this new approach is earlier log deletion between two flushes, which does not guarantee to happen anyway because the obsolete file clean-up function is only executed after flush or compaction)
This min log number to keep is stored in the manifest using the safely-ignore customized field of AddFile entry, in order to guarantee that the DB generated using newer release can be opened by previous releases no older than 4.2.
Closes https://github.com/facebook/rocksdb/pull/3765
Differential Revision: D7747618
Pulled By: siying
fbshipit-source-id: d00c92105b4f83852e9754a1b70d6b64cb590729
Summary:
sync parent directory after deleting a file in delete scheduler. Otherwise, trim speed may not be as smooth as what we want.
Closes https://github.com/facebook/rocksdb/pull/3767
Differential Revision: D7760136
Pulled By: siying
fbshipit-source-id: ec131d53b61953f09c60d67e901e5eeb2716b05f
Summary:
1. Add a new ticker stat rocksdb.number.multiget.keys.found to track the
number of keys successfully read
2. Update rocksdb.memtable.hit/miss in DBImpl::MultiGet(). It was being done in
DBImpl::GetImpl(), but not MultiGet
Closes https://github.com/facebook/rocksdb/pull/3730
Differential Revision: D7677364
Pulled By: anand1976
fbshipit-source-id: af22bd0ef8ddc5cf2b4244b0a024e539fe48bca5
Summary:
This PR comments out the rest of the unused arguments which allow us to turn on the -Wunused-parameter flag. This is the second part of a codemod relating to https://github.com/facebook/rocksdb/pull/3557.
Closes https://github.com/facebook/rocksdb/pull/3662
Differential Revision: D7426121
Pulled By: Dayvedde
fbshipit-source-id: 223994923b42bd4953eb016a0129e47560f7e352
Summary:
In this change, an option to set different paths for different column families is added.
This option is set via cf_paths setting of ColumnFamilyOptions. This option will work in a similar fashion to db_paths setting. Cf_paths is a vector of Dbpath values which contains a pair of the absolute path and target size. Multiple levels in a Column family can go to different paths if cf_paths has more than one path.
To maintain backward compatibility, if cf_paths is not specified for a column family, db_paths setting will be used. Note that, if db_paths setting is also not specified, RocksDB already has code to use db_name as the only path.
Changes :
1) A new member "cf_paths" is added to ImmutableCfOptions. This is set, based on cf_paths setting of ColumnFamilyOptions and db_paths setting of ImmutableDbOptions. This member is used to identify the path information whenever files are accessed.
2) Validation checks are added for cf_paths setting based on existing checks for db_paths setting.
3) DestroyDB, PurgeObsoleteFiles etc. are edited to support multiple cf_paths.
4) Unit tests are added appropriately.
Closes https://github.com/facebook/rocksdb/pull/3102
Differential Revision: D6951697
Pulled By: ajkr
fbshipit-source-id: 60d2262862b0a8fd6605b09ccb0da32bb331787d
Summary:
The is an optimization to reduce lookup in the CommitCache when querying IsInSnapshot. The optimization takes the smallest uncommitted data at the time that the snapshot was taken and if the sequence number of the read data is lower than that number it assumes the data as committed.
To implement this optimization two changes are required: i) The AddPrepared function must be called sequentially to avoid out of order insertion in the PrepareHeap (otherwise the top of the heap does not indicate the smallest prepare in future too), ii) non-2PC transactions also call AddPrepared if they do not commit in one step.
Closes https://github.com/facebook/rocksdb/pull/3649
Differential Revision: D7388630
Pulled By: maysamyabandeh
fbshipit-source-id: b79506238c17467d590763582960d4d90181c600
Summary:
Possible interleaved execution of background compaction thread calling `FindObsoleteFiles (no full scan) / PurgeObsoleteFiles` and user thread calling `FindObsoleteFiles (full scan) / PurgeObsoleteFiles` can lead to race condition on which RocksDB attempts to delete a file twice. The second attempt will fail and return `IO error`. This may occur to other files, but this PR targets sst.
Also add a unit test to verify that this PR fixes the issue.
The newly added unit test `obsolete_files_test` has a test case for this scenario, implemented in `ObsoleteFilesTest#RaceForObsoleteFileDeletion`. `TestSyncPoint`s are used to coordinate the interleaving the `user_thread` and background compaction thread. They execute as follows
```
timeline user_thread background_compaction thread
t1 | FindObsoleteFiles(full_scan=false)
t2 | FindObsoleteFiles(full_scan=true)
t3 | PurgeObsoleteFiles
t4 | PurgeObsoleteFiles
V
```
When `user_thread` invokes `FindObsoleteFiles` with full scan, it collects ALL files in RocksDB directory, including the ones that background compaction thread have collected in its job context. Then `user_thread` will see an IO error when trying to delete these files in `PurgeObsoleteFiles` because background compaction thread has already deleted the file in `PurgeObsoleteFiles`.
To fix this, we make RocksDB remember which (SST) files have been found by threads after calling `FindObsoleteFiles` (see `DBImpl#files_grabbed_for_purge_`). Therefore, when another thread calls `FindObsoleteFiles` with full scan, it will not collect such files.
ajkr could you take a look and comment? Thanks!
Closes https://github.com/facebook/rocksdb/pull/3638
Differential Revision: D7384372
Pulled By: riversand963
fbshipit-source-id: 01489516d60012e722ee65a80e1449e589ce26d3
Summary:
Currently log_writer->AddRecord in WriteImpl is protected from concurrent calls via FlushWAL only if two_write_queues_ option is set. The patch fixes the problem by i) skip log_writer->AddRecord in FlushWAL if manual_wal_flush is not set, ii) protects log_writer->AddRecord in WriteImpl via log_write_mutex_ if manual_wal_flush_ is set but two_write_queues_ is not.
Fixes#3599
Closes https://github.com/facebook/rocksdb/pull/3656
Differential Revision: D7405608
Pulled By: maysamyabandeh
fbshipit-source-id: d6cc265051c77ae49c7c6df4f427350baaf46934
Summary:
Currently AddPrepared is performed only on the first sub-batch if there are duplicate keys in the write batch. This could cause a problem if the transaction takes too long to commit and the seq number of the first sub-patch moved to old_prepared_ but not the seq of the later ones. The patch fixes this by calling AddPrepared for all sub-patches.
Closes https://github.com/facebook/rocksdb/pull/3651
Differential Revision: D7388635
Pulled By: maysamyabandeh
fbshipit-source-id: 0ccd80c150d9bc42fe955e49ddb9d7ca353067b4
Summary:
This diff handles cases where compaction causes an ENOSPC error.
This does not handle corner cases where another background job is started while compaction is running, and the other background job triggers ENOSPC, although we do allow the user to provision for these background jobs with SstFileManager::SetCompactionBufferSize.
It also does not handle the case where compaction has finished and some other background job independently triggers ENOSPC.
Usage: Functionality is inside SstFileManager. In particular, users should set SstFileManager::SetMaxAllowedSpaceUsage, which is the reference highwatermark for determining whether to cancel compactions.
Closes https://github.com/facebook/rocksdb/pull/3449
Differential Revision: D7016941
Pulled By: amytai
fbshipit-source-id: 8965ab8dd8b00972e771637a41b4e6c645450445
Summary:
This patch addressed several issues.
Portability including db_test std::thread -> port::Thread Cc: @
and %z to ROCKSDB portable macro. Cc: maysamyabandeh
Implement Env::AreFilesSame
Make the implementation of file unique number more robust
Get rid of C-runtime and go directly to Windows API when dealing
with file primitives.
Implement GetSectorSize() and aling unbuffered read on the value if
available.
Adjust Windows Logger for the new interface, implement CloseImpl() Cc: anand1976
Fix test running script issue where $status var was of incorrect scope
so the failures were swallowed and not reported.
DestroyDB() creates a logger and opens a LOG file in the directory
being cleaned up. This holds a lock on the folder and the cleanup is
prevented. This fails one of the checkpoin tests. We observe the same in production.
We close the log file in this change.
Fix DBTest2.ReadAmpBitmapLiveInCacheAfterDBClose failure where the test
attempts to open a directory with NewRandomAccessFile which does not
work on Windows.
Fix DBTest.SoftLimit as it is dependent on thread timing. CC: yiwu-arbug
Closes https://github.com/facebook/rocksdb/pull/3552
Differential Revision: D7156304
Pulled By: siying
fbshipit-source-id: 43db0a757f1dfceffeb2b7988043156639173f5b
Summary:
CompactRange has a call to Flush because we guarantee that, at the time it's called, all existing keys in the range will be pushed through the user's compaction filter. However, previously the flush was done blindly, so it'd happen even if the memtable does not contain keys in the range specified by the user. This caused unnecessarily many L0 files to be created, leading to write stalls in some cases. This PR checks the memtable's contents, and decides to flush only if it overlaps with `CompactRange`'s range.
- Move the memtable overlap check logic from `ExternalSstFileIngestionJob` to `ColumnFamilyData::RangesOverlapWithMemtables`
- Reuse the above logic in `CompactRange` and skip flushing if no overlap
Closes https://github.com/facebook/rocksdb/pull/3520
Differential Revision: D7018897
Pulled By: ajkr
fbshipit-source-id: a3c6b1cfae56687b49dd89ccac7c948e53545934
Summary:
The recent Logger::Close() and DBImpl::Close() implementation rely on
calling the CloseImpl() virtual function from the destructor, which will
not work. Refactor the implementation to have a private close helper
function in derived classes that can be called by both CloseImpl() and
the destructor.
Closes https://github.com/facebook/rocksdb/pull/3528
Reviewed By: gfosco
Differential Revision: D7049303
Pulled By: anand1976
fbshipit-source-id: 76a64cbf403209216dfe4864ecf96b5d7f3db9f4
Summary:
- Refactored logic for checking write stall condition to a helper function: `GetWriteStallConditionAndCause`. Now it is decoupled from the logic for updating WriteController / stats in `RecalculateWriteStallConditions`, so we can reuse it for predicting whether write stall will occur.
- Updated `CompactRange` to first check whether the one additional immutable memtable / L0 file would cause stalling before it flushes. If so, it waits until that is no longer true.
- Updated `bg_cv_` to be signaled on `SetOptions` calls. The stall conditions `CompactRange` cares about can change when (1) flush finishes, (2) compaction finishes, or (3) options dynamically change. The cv was already signaled for (1) and (2) but not yet for (3).
Closes https://github.com/facebook/rocksdb/pull/3381
Differential Revision: D6754983
Pulled By: ajkr
fbshipit-source-id: 5613e03f1524df7192dc6ae885d40fd8f091d972
Summary:
It's always a mystery from the logs why flush was triggered -- user triggered it manually, WriteBufferManager triggered it, logs were full, write buffer was full, etc.
This PR logs Flush reason whenever a flush is scheduled.
Closes https://github.com/facebook/rocksdb/pull/3401
Differential Revision: D6788142
Pulled By: miasantreble
fbshipit-source-id: a867e54d493c06adf5172bd36a180fb3faae3511
Summary:
There are a couple of places where we swallow any error from
WriteBuffer() - in SwitchMemtable() and DBImpl::CloseImpl(). Propagate
the error up in those cases rather than ignoring it.
Closes https://github.com/facebook/rocksdb/pull/3404
Differential Revision: D6879954
Pulled By: anand1976
fbshipit-source-id: 2ef88b554be5286b0a8bad7384ba17a105395bdb
Summary:
Using `DeleteFilesInRange` to delete files in a lot of ranges can be slow, because
`VersionSet::LogAndApply` is expensive.
This PR adds a new `DeleteFilesInRange` function to delete files in multiple
ranges at once.
Close https://github.com/facebook/rocksdb/issues/2951
Closes https://github.com/facebook/rocksdb/pull/3431
Differential Revision: D6849228
Pulled By: ajkr
fbshipit-source-id: daeedcabd8def4b1d9ee95a58266dee77b5d68cb
Summary:
When calling `DisableFileDeletions` followed by `GetSortedWalFiles`, we guarantee the files returned by the latter call won't be deleted until after file deletions are re-enabled. However, `GetSortedWalFiles` didn't omit files already planned for deletion via `PurgeObsoleteFiles`, so the guarantee could be broken.
We fix it by making `GetSortedWalFiles` wait for the number of pending purges to hit zero if file deletions are disabled. This condition is eventually met since `PurgeObsoleteFiles` is guaranteed to be called for the existing pending purges, and new purges cannot be scheduled while file deletions are disabled. Once the condition is met, `GetSortedWalFiles` simply returns the content of DB and archive directories, which nobody can delete (except for deletion scheduler, for which I plan to fix this bug later) until deletions are re-enabled.
Closes https://github.com/facebook/rocksdb/pull/3341
Differential Revision: D6681131
Pulled By: ajkr
fbshipit-source-id: 90b1e2f2362ea9ef715623841c0826611a817634
Summary:
Currently, the only way to close an open DB is to destroy the DB
object. There is no way for the caller to know the status. In one
instance, the destructor encountered an error due to failure to
close a log file on HDFS. In order to prevent silent failures, we add
DB::Close() that calls CloseImpl() which must be implemented by its
descendants.
The main failure point in the destructor is closing the log file. This
patch also adds a Close() entry point to Logger in order to get status.
When DBOptions::info_log is allocated and owned by the DBImpl, it is
explicitly closed by DBImpl::CloseImpl().
Closes https://github.com/facebook/rocksdb/pull/3348
Differential Revision: D6698158
Pulled By: anand1976
fbshipit-source-id: 9468e2892553eb09c4c41b8723f590c0dbd8ab7d
Summary:
A proper implementation of Iterator::Refresh() for WritePreparedTxnDB would require release and acquire another snapshot. Since MyRocks don't make use of Iterator::Refresh(), we just simply mark it as not supported.
Closes https://github.com/facebook/rocksdb/pull/3290
Differential Revision: D6599931
Pulled By: yiwu-arbug
fbshipit-source-id: 4e1632d967316431424f6e458254ecf9a97567cf
Summary:
Previously we store sequence number range of each blob files, and use the sequence number range to check if the file can be possibly visible by a snapshot. But it adds complexity to the code, since the sequence number is only available after a write. (The current implementation get sequence number by calling GetLatestSequenceNumber(), which is wrong.) With the patch, we are not storing sequence number range, and check if snapshot_sequence < obsolete_sequence to decide if the file is visible by a snapshot (previously we check if first_sequence <= snapshot_sequence < obsolete_sequence).
Closes https://github.com/facebook/rocksdb/pull/3274
Differential Revision: D6571497
Pulled By: yiwu-arbug
fbshipit-source-id: ca06479dc1fcd8782f6525b62b7762cd47d61909
Summary:
Let me know if more test coverage is needed
Closes https://github.com/facebook/rocksdb/pull/3213
Differential Revision: D6457165
Pulled By: miasantreble
fbshipit-source-id: 3f944abff28aa7775237f1c4f61c64ccbad4eea9
