Summary:
The ImmutableCFOptions contained a bunch of fields that belonged to the ImmutableDBOptions. This change cleans that up by introducing an ImmutableOptions struct. Following the pattern of Options struct, this class inherits from the DB and CFOption structs (of the Immutable form).
Only one structural change (the ImmutableCFOptions::fs was changed to a shared_ptr from a raw one) is in this PR. All of the other changes involve moving the member variables from the ImmutableCFOptions into the ImmutableOptions and changing member variables or function parameters as required for compilation purposes.
Follow-on PRs may do a further clean-up of the code, such as renaming variables (such as "ImmutableOptions cf_options") and potentially eliminating un-needed function parameters (there is no longer a need to pass both an ImmutableDBOptions and an ImmutableOptions to a function).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8262
Reviewed By: pdillinger
Differential Revision: D28226540
Pulled By: mrambacher
fbshipit-source-id: 18ae71eadc879dedbe38b1eb8e6f9ff5c7147dbf
Summary:
Greatly reduced the not-quite-copy-paste giant parameter lists
of rocksdb::NewTableBuilder, rocksdb::BuildTable,
BlockBasedTableBuilder::Rep ctor, and BlockBasedTableBuilder ctor.
Moved weird separate parameter `uint32_t column_family_id` of
TableFactory::NewTableBuilder into TableBuilderOptions.
Re-ordered parameters to TableBuilderOptions ctor, so that `uint64_t
target_file_size` is not randomly placed between uint64_t timestamps
(was easy to mix up).
Replaced a couple of fields of BlockBasedTableBuilder::Rep with a
FilterBuildingContext. The motivation for this change is making it
easier to pass along more data into new fields in FilterBuildingContext
(follow-up PR).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8240
Test Plan: ASAN make check
Reviewed By: mrambacher
Differential Revision: D28075891
Pulled By: pdillinger
fbshipit-source-id: fddb3dbb8260a0e8bdcbb51b877ebabf9a690d4f
Summary:
DB Stress to add --open_metadata_write_fault_one_in which would randomly fail in some file metadata modification operations during DB Open, including file creation, close, renaming and directory sync. Some operations can fail before and after the operations take place.
If DB open fails, db_stress would retry without the failure ingestion, and DB is expected to open successfully.
This option is enabled in crash test in half of the time.
Some follow up changes would allow write failures in open time, and ingesting those failures in non-DB open cases.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8235
Test Plan: Run stress tests for a while and see failures got triggered. This can reproduce the bug fixed by https://github.com/facebook/rocksdb/pull/8192 and a similar one that fails when fsyncing parent directory.
Reviewed By: anand1976
Differential Revision: D28010944
fbshipit-source-id: 36a96da4dc3633e5f7680cef3ea0a900fcdb5558
Summary:
This PR is a first step at attempting to clean up some of the Mutable/Immutable Options code. With this change, a DBOption and a ColumnFamilyOption can be reconstructed from their Mutable and Immutable equivalents, respectively.
readrandom tests do not show any performance degradation versus master (though both are slightly slower than the current 6.19 release).
There are still fields in the ImmutableCFOptions that are not CF options but DB options. Eventually, I would like to move those into an ImmutableOptions (= ImmutableDBOptions+ImmutableCFOptions). But that will be part of a future PR to minimize changes and disruptions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8176
Reviewed By: pdillinger
Differential Revision: D27954339
Pulled By: mrambacher
fbshipit-source-id: ec6b805ba9afe6e094bffdbd76246c2d99aa9fad
Summary:
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8208
Make include of "file_system.h" use the same include path as everywhere
else.
Reviewed By: riversand963, akankshamahajan15
Differential Revision: D27881606
fbshipit-source-id: fc1e076229fde21041a813c655ce017b5070c8b3
Summary:
In a distributed environment, a file `rename()` operation can succeed on server (remote)
side, but the client can somehow return non-ok status to RocksDB. Possible reasons include
network partition, connection issue, etc. This happens in `rocksdb::SetCurrentFile()`, which
can be called in `LogAndApply() -> ProcessManifestWrites()` if RocksDB tries to switch to a
new MANIFEST. We currently always delete the new MANIFEST if an error occurs.
This is problematic in distributed world. If the server-side successfully updates the CURRENT
file via renaming, then a subsequent `DB::Open()` will try to look for the new MANIFEST and fail.
As a fix, we can track the execution result of IO operations on the new MANIFEST.
- If IO operations on the new MANIFEST fail, then we know the CURRENT must point to the original
MANIFEST. Therefore, it is safe to remove the new MANIFEST.
- If IO operations on the new MANIFEST all succeed, but somehow we end up in the clean up
code block, then we do not know whether CURRENT points to the new or old MANIFEST. (For local
POSIX-compliant FS, it should still point to old MANIFEST, but it does not matter if we keep the
new MANIFEST.) Therefore, we keep the new MANIFEST.
- Any future `LogAndApply()` will switch to a new MANIFEST and update CURRENT.
- If process reopens the db immediately after the failure, then the CURRENT file can point
to either the new MANIFEST or the old one, both of which exist. Therefore, recovery can
succeed and ignore the other.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8192
Test Plan: make check
Reviewed By: zhichao-cao
Differential Revision: D27804648
Pulled By: riversand963
fbshipit-source-id: 9c16f2a5ce41bc6aadf085e48449b19ede8423e4
Summary:
Historically, the DB properties `rocksdb.cur-size-active-mem-table`,
`rocksdb.cur-size-all-mem-tables`, and `rocksdb.size-all-mem-tables` called
the method `MemTable::ApproximateMemoryUsage` for mutable memtables,
which is not safe without synchronization. This resulted in data races with
memtable inserts. The patch changes the code handling these properties
to use `MemTable::ApproximateMemoryUsageFast` instead, which returns a
cached value backed by an atomic variable. Two test cases had to be updated
for this change. `MemoryTest.MemTableAndTableReadersTotal` was fixed by
increasing the value size used so each value ends up in its own memtable,
which was the original intention (note: the test has been broken in the sense
that the test code didn't consider that memtable sizes below 64 KB get
increased to 64 KB by `SanitizeOptions`, and has been passing only by
accident). `DBTest.MemoryUsageWithMaxWriteBufferSizeToMaintain` relies on
completely up-to-date values and thus was changed to use `ApproximateMemoryUsage`
directly instead of going through the DB properties. Note: this should be safe in this case
since there's only a single thread involved.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8206
Test Plan: `make check`
Reviewed By: riversand963
Differential Revision: D27866811
Pulled By: ltamasi
fbshipit-source-id: 7bd754d0565e0a65f1f7f0e78ffc093beef79394
Summary:
Test was flaky because for kUseDbSessionId naming, blob files use
naming scheme kLegacyCrc32cAndFileSize. So expected number of files
because of collision can vary. So disabling blobdb for this test case.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8197
Reviewed By: pdillinger
Differential Revision: D27836997
Pulled By: akankshamahajan15
fbshipit-source-id: 5eb21a5f4acae3d6b730a9e1b207264fbc18cb80
Summary:
Resolves https://github.com/facebook/rocksdb/issues/8014
- Add an assertion on `DB::Open` to ensure `db_options.max_open_files` is unlimited if FIFO Compaction is being used.
- This is to align with what the docs mention and to prevent premature data deletion.
- Update tests to work with this assertion.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8172
Test Plan:
```bash
$ make check -j$(nproc)
Generated TARGETS Summary:
- 6 libs
- 0 binarys
- 180 tests
```
Reviewed By: ajkr
Differential Revision: D27768792
Pulled By: thejchap
fbshipit-source-id: cf6350535e3a3577fec72bcba75b3c094dc7a6f3
Summary:
* CreateNewBackup(WithMetadata) returning the BackupID of new backup
through optional new output param. This is especially useful with the
new mutithreading support, so that you can transactionally determine the
ID of a backup you create.
* GetBackupInfo / GetLatestBackupInfo for individual backups, so that
you don't have to comb through a vector of backups if you don't want to.
Updated HISTORY.md (including re: BlobDB support as new feature)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8170
Test Plan:
Added test logic to existing tests, to minimize increase in
cost of running tests
Reviewed By: zhichao-cao
Differential Revision: D27680410
Pulled By: pdillinger
fbshipit-source-id: 1fc45b73d81aae293ccd4a43d9583d7fd915d3eb
Summary:
Add support for blob files for backup/restore like table files.
Since DB session ID is currently not supported for blob files (there is no place to store it in
the header), so for blob files uses the
kLegacyCrc32cAndFileSize naming scheme even if
share_files_with_checksum_naming is set to kUseDbSessionId.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8129
Test Plan: Add new test units
Reviewed By: ltamasi
Differential Revision: D27408510
Pulled By: akankshamahajan15
fbshipit-source-id: b27434d189a639ef3e6ad165c61a143a2daaf06e
Summary:
Fixing another crash test failure in the case of
write_dbid_to_manifest=true and reading a backup as read-only DB.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8164
Test Plan:
enhanced unit test for backup as read-only DB, ran
blackbox_crash_test more with elevated backup_one_in
Reviewed By: zhichao-cao
Differential Revision: D27622237
Pulled By: pdillinger
fbshipit-source-id: 680d0f99ddb465a601737f2e3f2c80efd47384fb
Summary:
Forgot to re-test crash test after adding read-only filesystem
enforcement to https://github.com/facebook/rocksdb/issues/8142. The problem is ReadOnlyFileSystem would reject
CreateDirIfMissing whenever DBOptions::create_if_missing=true. The fix
that is better for users is to allow CreateDirIfMissing in
ReadOnlyFileSystem if the directory exists, so that they don't cause a
failure on using create_if_missing with opening backups as read-only
DBs. Added this option test to the unit test (in addition to being in the
crash test).
Also fixed a couple of lints.
And some better messaging from 'make format' so that when you run it
with uncommitted changes, it's clear that it's only checking the
uncommitted changes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8161
Test Plan: local blackbox_crash_test with amplified backup_one_in
Reviewed By: ajkr
Differential Revision: D27614409
Pulled By: pdillinger
fbshipit-source-id: 63ccb626c7e34c200d61c6bca2a8f60da9015179
Summary:
A current limitation of backups is that you don't know the
exact database state of when the backup was taken. With this new
feature, you can at least inspect the backup's DB state without
restoring it by opening it as a read-only DB.
Rather than add something like OpenAsReadOnlyDB to the BackupEngine API,
which would inhibit opening stackable DB implementations read-only
(if/when their APIs support it), we instead provide a DB name and Env
that can be used to open as a read-only DB.
Possible follow-up work:
* Add a version of GetBackupInfo for a single backup.
* Let CreateNewBackup return the BackupID of the newly-created backup.
Implementation details:
Refactored ChrootFileSystem to split off new base class RemapFileSystem,
which allows more general remapping of files. We use this base class to
implement BackupEngineImpl::RemapSharedFileSystem.
To minimize API impact, I decided to just add these fields `name_for_open`
and `env_for_open` to those set by GetBackupInfo when
include_file_details=true. Creating the RemapSharedFileSystem adds a bit
to the memory consumption, perhaps unnecessarily in some cases, but this
has been mitigated by (a) only initialize the RemapSharedFileSystem
lazily when GetBackupInfo with include_file_details=true is called, and
(b) using the existing `shared_ptr<FileInfo>` objects to hold most of the
mapping data.
To enhance API safety, RemapSharedFileSystem is wrapped by new
ReadOnlyFileSystem which rejects any attempts to write. This uncovered a
couple of places in which DB::OpenForReadOnly would write to the
filesystem, so I fixed these. Added a release note because this affects
logging.
Additional minor refactoring in backupable_db.cc to support the new
functionality.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8142
Test Plan:
new test (run with ASAN and UBSAN), added to stress test and
ran it for a while with amplified backup_one_in
Reviewed By: ajkr
Differential Revision: D27535408
Pulled By: pdillinger
fbshipit-source-id: 04666d310aa0261ef6b2385c43ca793ce1dfd148
Summary:
Before corrupting a file in the DB and expecting corruption to
be detected, open DB read-only to ensure file is not made obsolete by
compaction. Also, to avoid obsolete files not yet deleted, only select
live files to corrupt.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8151
Test Plan: watch CI
Reviewed By: akankshamahajan15
Differential Revision: D27568849
Pulled By: pdillinger
fbshipit-source-id: 39a69a2eafde0482b20a197949d24abe21952f27
Summary:
BackupEngine previously had unclear but strict concurrency
requirements that the API user must follow for safe use. Now we make
that clear, by separating operations into "Read," "Append," and "Write"
operations, and specifying which combinations are safe across threads on
the same BackupEngine object (previously none; now all, using a
read-write lock), and which are safe across different BackupEngine
instances open on the same backup_dir.
The changes to backupable_db.h should be backward compatible. It is
mostly about eliminating copies of what should be the same function and
(unsurprisingly) useful documentation comments were often placed on
only one of the two copies. With the re-organization, we are also
grouping different categories of operations. In the future we might add
BackupEngineReadAppendOnly, but that didn't seem necessary.
To mark API Read operations 'const', I had to mark some implementation
functions 'const' and some fields mutable.
Functional changes:
* Added RWMutex locking around public API functions to implement thread
safety on a single object. To avoid future bugs, this is another
internal class layered on top (removing many "override" in
BackupEngineImpl). It would be possible to allow more concurrency
between operations, rather than mutual exclusion, but IMHO not worth the
work.
* Fixed a race between Open() (Initialize()) and CreateNewBackup() for
different objects on the same backup_dir, where Initialize() could
delete the temporary meta file created during CreateNewBackup().
(This was found by the new test.)
Also cleaned up a couple of "status checked" TODOs, and improved a
checksum mismatch error message to include involved files.
Potential follow-up work:
* CreateNewBackup has an API wart because it doesn't tell you the
BackupID it just created, which makes it of limited use in a multithreaded
setting.
* We could also consider a Refresh() function to catch up to
changes made from another BackupEngine object to the same dir.
* Use a lock file to prevent multiple writer BackupEngines, but this
won't work on remote filesystems not supporting lock files.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8115
Test Plan:
new mini-stress test in backup unit tests, run with gcc,
clang, ASC, TSAN, and UBSAN, 100 iterations each.
Reviewed By: ajkr
Differential Revision: D27347589
Pulled By: pdillinger
fbshipit-source-id: 28d82ed2ac672e44085a739ddb19d297dad14b15
Summary:
The implementation of TransactionDB::WrapDB() and
TransactionDB::WrapStackableDB() are almost identical, except for the
type of the first argument `db`. This PR adds a new template function in
anonymous namespace, and calls it in the above two functions.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8079
Test Plan: make check
Reviewed By: lth
Differential Revision: D27184575
Pulled By: riversand963
fbshipit-source-id: f2855a6db3a7e897d0d611f7050ca4b696c56a7a
Summary:
This does not add any new public APIs or published
functionality, but adds the ability to read and use (and in tests,
write) backups with a new meta file schema, based on the old schema
but not forward-compatible (before this change). The new schema enables
some capabilities not in the old:
* Explicit versioning, so that users get clean error messages the next
time we want to break forward compatibility.
* Ignoring unrecognized fields (with warning), so that new non-critical
features can be added without breaking forward compatibility.
* Rejecting future "non-ignorable" fields, so that new features critical
to some use-cases could potentially be added outside of linear schema
versions, with broken forward compatibility.
* Fields at the end of the meta file, such as for checksum of the meta
file's contents (up to that point)
* New optional 'size' field for each file, which is checked when present
* Optionally omitting 'crc32' field, so that we aren't required to have
a crc32c checksum for files to take a backup. (E.g. to support backup
via hard links and to better support file custom checksums.)
Because we do not have a JSON parser and to share code, the new schema
is simply derived from the old schema.
BackupEngine code is updated to allow missing checksums in some places,
and to make that easier, `has_checksum` and `verify_checksum_after_work`
are eliminated. Empty `checksum_hex` indicates checksum is unknown. I'm
not too afraid of regressing on data integrity, because
(a) we have pretty good test coverage of corruption detection in backups, and
(b) we are increasingly relying on the DB itself for data integrity rather than
it being an exclusive feature of backups.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8069
Test Plan:
new unit tests, added to crash test (some local run with
boosted backup probability)
Reviewed By: ajkr
Differential Revision: D27139824
Pulled By: pdillinger
fbshipit-source-id: 9e0e4decfb42bb84783d64d2d246456d97e8e8c5
Summary:
Add the new Append and PositionedAppend API to env WritableFile. User is able to benefit from the write checksum handoff API when using the legacy Env classes. FileSystem already implemented the checksum handoff API.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8071
Test Plan: make check, added new unit test.
Reviewed By: anand1976
Differential Revision: D27177043
Pulled By: zhichao-cao
fbshipit-source-id: 430c8331fc81099fa6d00f4fff703b68b9e8080e
Summary:
These classes were wraps of Env that provided only extensions to the FileSystem functionality. Changed the classes to be FileSystems and the wraps to be of the CompositeEnvWrapper.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7968
Reviewed By: anand1976
Differential Revision: D26900253
Pulled By: mrambacher
fbshipit-source-id: 94001d8024a3c54a1c11adadca2bac66c3af2a77
Summary:
For performance purposes, the lower level routines were changed to use a SystemClock* instead of a std::shared_ptr<SystemClock>. The shared ptr has some performance degradation on certain hardware classes.
For most of the system, there is no risk of the pointer being deleted/invalid because the shared_ptr will be stored elsewhere. For example, the ImmutableDBOptions stores the Env which has a std::shared_ptr<SystemClock> in it. The SystemClock* within the ImmutableDBOptions is essentially a "short cut" to gain access to this constant resource.
There were a few classes (PeriodicWorkScheduler?) where the "short cut" property did not hold. In those cases, the shared pointer was preserved.
Using db_bench readrandom perf_level=3 on my EC2 box, this change performed as well or better than 6.17:
6.17: readrandom : 28.046 micros/op 854902 ops/sec; 61.3 MB/s (355999 of 355999 found)
6.18: readrandom : 32.615 micros/op 735306 ops/sec; 52.7 MB/s (290999 of 290999 found)
PR: readrandom : 27.500 micros/op 871909 ops/sec; 62.5 MB/s (367999 of 367999 found)
(Note that the times for 6.18 are prior to revert of the SystemClock).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8033
Reviewed By: pdillinger
Differential Revision: D27014563
Pulled By: mrambacher
fbshipit-source-id: ad0459eba03182e454391b5926bf5cdd45657b67
Summary:
This API can be used for things like determining how much space
can be freed up by deleting a particular backup, etc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8042
Test Plan:
validation of the API added to many existing backup unit
tests
Reviewed By: mrambacher
Differential Revision: D26936577
Pulled By: pdillinger
fbshipit-source-id: f0bbd90f0917b9781a6837652fb4616d9247816a
Summary:
Removed confusing, awkward, and undocumented internal API
ReadOneLine and replaced with very simple LineFileReader.
In refactoring backupable_db.cc, this has the side benefit of
removing the arbitrary cap on the size of backup metadata files.
Also added Status::MustCheck to make it easy to mark a Status as
"must check." Using this, I can ensure that after
LineFileReader::ReadLine returns false the caller checks GetStatus().
Also removed some excessive conditional compilation in status.h
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8026
Test Plan: added unit test, and running tests with ASSERT_STATUS_CHECKED
Reviewed By: mrambacher
Differential Revision: D26831687
Pulled By: pdillinger
fbshipit-source-id: ef749c265a7a26bb13cd44f6f0f97db2955f6f0f
Summary:
New comment for share_files_with_checksum:
// Only used if share_table_files is set to true. Setting to false is
// DEPRECATED and potentially dangerous because in that case BackupEngine
// can lose data if backing up databases with distinct or divergent
// history, for example if restoring from a backup other than the latest,
// writing to the DB, and creating another backup. Setting to true (default)
// prevents these issues by ensuring that different table files (SSTs) with
// the same number are treated as distinct. See
// share_files_with_checksum_naming and ShareFilesNaming.
I have also removed interim option kFlagMatchInterimNaming, which is no
longer needed and was never needed for correct+compatible operation
(just performance).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8020
Test Plan:
tests updated. Backward+forward compatibility verified with
SHORT_TEST=1 check_format_compatible.sh. ldb uses default backup
options, and I manually verified shared_checksum in
/tmp/rocksdb_format_compatible_peterd/bak/current/ after run.
Reviewed By: ajkr
Differential Revision: D26786331
Pulled By: pdillinger
fbshipit-source-id: 36f968dfef1f5cacbd65154abe1d846151a55130
Summary:
The checkpointing logic supports passing file level checksums
to the copy_file_cb callback function which is used by the backup code
for detecting corruption during file copies.
However, this is currently implemented only for table files.
This PR extends the checksum retrieval to blob files as well.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/8003
Test Plan: Add new test units
Reviewed By: ltamasi
Differential Revision: D26680701
Pulled By: akankshamahajan15
fbshipit-source-id: 1bd1e2464df6e9aa31091d35b8c72786d94cd1c5
Summary:
Allow applications to implement a custom compaction filter and pass it to BlobDB.
The compaction filter's custom logic can operate on blobs.
To do so, application needs to subclass `CompactionFilter` abstract class and implement `FilterV2()` method.
Optionally, a method called `ShouldFilterBlobByKey()` can be implemented if application's custom logic rely solely
on the key to make a decision without reading the blob, thus saving extra IO. Examples can be found in
db/blob/db_blob_compaction_test.cc.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7974
Test Plan: make check
Reviewed By: ltamasi
Differential Revision: D26509280
Pulled By: riversand963
fbshipit-source-id: 59f9ae5614c4359de32f4f2b16684193cc537b39
Summary:
Fix this scenario:
trx1> acquire shared lock on $key
trx2> acquire shared lock on the same $key
trx1> attempt to acquire a unique lock on $key.
Lock acquisition will fail, and deadlock detection will start.
It will call iterate_and_get_overlapping_row_locks() which will
produce a list with two locks (shared locks by trx1 and trx2).
However the code in lock_request::build_wait_graph() was not prepared
to find the lock by the same transaction in the list of conflicting
locks. Fix it to ignore it.
(One may suggest to fix iterate_and_get_overlapping_row_locks() to not
include locks by trx1. This is not a good idea, because that function
is also used to report all locks currently held)
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7938
Reviewed By: zhichao-cao
Differential Revision: D26529374
Pulled By: ajkr
fbshipit-source-id: d89cbed008db1a97a8f2351b9bfb75310750d16a
Summary:
TransactionDB uses read callback to filter out un-committed data before
a snapshot. But `MultiGet()` API doesn't use that at all, which causes
returning unwanted data.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7963
Test Plan: Added unittest to reproduce
Reviewed By: anand1976
Differential Revision: D26455851
Pulled By: jay-zhuang
fbshipit-source-id: 265276698cf9d8c4cd79e3250ef10d14375bac55
Summary:
The patch adds checkpoint support to BlobDB. Blob files are hard linked or
copied, depending on whether the checkpoint directory is on the same filesystem
or not, similarly to table files.
TODO: Add support for blob files to `ExportColumnFamily` and to the checksum
verification logic used by backup/restore.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7959
Test Plan: Ran `make check` and the crash test for a while.
Reviewed By: riversand963
Differential Revision: D26434768
Pulled By: ltamasi
fbshipit-source-id: 994be55a8dc08133028250760fca440d2c7c4dc5
Summary:
in PR https://github.com/facebook/rocksdb/issues/7419 , we introduce the new Append and PositionedAppend APIs to WritableFile at File System, which enable RocksDB to pass the data verification information (e.g., checksum of the data) to the lower layer. In this PR, we use the new API in WritableFileWriter, such that the file created via WritableFileWrite can pass the checksum to the storage layer. To control which types file should apply the checksum handoff, we add checksum_handoff_file_types to DBOptions. User can use this option to control which file types (Currently supported file tyes: kLogFile, kTableFile, kDescriptorFile.) should use the new Append and PositionedAppend APIs to handoff the verification information.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7523
Test Plan: add new unit test, pass make check/ make asan_check
Reviewed By: pdillinger
Differential Revision: D24313271
Pulled By: zhichao-cao
fbshipit-source-id: aafd69091ae85c3318e3e17cbb96fe7338da11d0
Summary:
Explicitly reject all range deletions on `TransactionDB` or `OptimisticTransactionDB`, except when the user provides sufficient promises that allow us to proceed safely. The necessary promises are described in the API doc for `TransactionDB::DeleteRange()`. There is currently no way to provide enough promises to make it safe in `OptimisticTransactionDB`.
Fixes https://github.com/facebook/rocksdb/issues/7913.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7929
Test Plan: unit tests covering the cases it's permitted/rejected
Reviewed By: ltamasi
Differential Revision: D26240254
Pulled By: ajkr
fbshipit-source-id: 2834a0ce64cc3e4c3799e35b885a5e79c2f4f6d9
Summary:
Memtable bloom filter is useful in many use cases. A default value on with conservative 1.5% memory can benefit more use cases than use cases impacted.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6584
Test Plan: Run all existing tests.
Reviewed By: pdillinger
Differential Revision: D20626739
fbshipit-source-id: 1dd45532b932139552519b8c2682bd954550c2f9
Summary:
Removed the uses of the Legacy FileWrapper classes from the source code. The wrappers were creating an additional layer of indirection/wrapping, as the Env already has a FileSystem.
Moved the Custom FileWrapper classes into the CustomEnv, as these classes are really for the private use the the CustomEnv class.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7851
Reviewed By: anand1976
Differential Revision: D26114816
Pulled By: mrambacher
fbshipit-source-id: db32840e58d969d3a0fa6c25aaf13d6dcdc74150
Summary:
Introduces and uses a SystemClock class to RocksDB. This class contains the time-related functions of an Env and these functions can be redirected from the Env to the SystemClock.
Many of the places that used an Env (Timer, PerfStepTimer, RepeatableThread, RateLimiter, WriteController) for time-related functions have been changed to use SystemClock instead. There are likely more places that can be changed, but this is a start to show what can/should be done. Over time it would be nice to migrate most (if not all) of the uses of the time functions from the Env to the SystemClock.
There are several Env classes that implement these functions. Most of these have not been converted yet to SystemClock implementations; that will come in a subsequent PR. It would be good to unify many of the Mock Timer implementations, so that they behave similarly and be tested similarly (some override Sleep, some use a MockSleep, etc).
Additionally, this change will allow new methods to be introduced to the SystemClock (like https://github.com/facebook/rocksdb/issues/7101 WaitFor) in a consistent manner across a smaller number of classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7858
Reviewed By: pdillinger
Differential Revision: D26006406
Pulled By: mrambacher
fbshipit-source-id: ed10a8abbdab7ff2e23d69d85bd25b3e7e899e90
Summary:
In the original stacked BlobDB implementation, which writes blobs to blob files
immediately and treats blob files as logs, it makes sense to flush the file after
writing each blob to protect against process crashes; however, in the integrated
implementation, which builds blob files in the background jobs, this unnecessarily
reduces performance. This patch fixes this by simply adding a `do_flush` flag to
`BlobLogWriter`, which is set to `true` by the stacked implementation and to `false`
by the new code. Note: the change itself is trivial but the tests needed some work;
since in the new implementation, blobs are now buffered, adding a blob to
`BlobFileBuilder` is no longer guaranteed to result in an actual I/O. Therefore, we can
no longer rely on `FaultInjectionTestEnv` when testing failure cases; instead, we
manipulate the return values of I/O methods directly using `SyncPoint`s.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7892
Test Plan: `make check`
Reviewed By: jay-zhuang
Differential Revision: D26022814
Pulled By: ltamasi
fbshipit-source-id: b3dce419f312137fa70d84cdd9b908fd5d60d8cd
Summary:
`CheckpointTest.CurrentFileModifiedWhileCheckpointing` could hang
because now create checkpoint triggers flush twice. The test should wait
both flush done.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7849
Test Plan: `gtest-parallel ./checkpoint_test --gtest_filter=CheckpointTest.CurrentFileModifiedWhileCheckpointing -r 100`
Reviewed By: ajkr
Differential Revision: D25860713
Pulled By: jay-zhuang
fbshipit-source-id: e1c2f23037dedc33e205519f4289a25e77816b41
Summary:
The main improvement here is to not include `.` or `..` in the results of `Env::GetChildren`. The occurrence of `.` or `..`; it is non-portable, dependent on the Operating System and the File System. See: https://www.gnu.org/software/libc/manual/html_node/Reading_002fClosing-Directory.html
There were lots of duplicate checks spread through the RocksDB codebase previously to skip `.` and `..`. This new removes the need for those at the source.
Also some minor fixes to `Env::GetChildren`:
* Improve error handling in POSIX implementation
* Remove unnecessary array allocation on Windows
* Fix struct name for Windows Non-UTF-8 API
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7819
Reviewed By: ajkr
Differential Revision: D25837394
Pulled By: jay-zhuang
fbshipit-source-id: 1e137e7218d38b450af9c083f73d5357abcbba2e
Summary:
Currently, manifest size is determined before getting min_log_num.
But between getting manifest size and getting min_log_num, concurrently, a flush might succeed, which will write new records to manifest to make some WALs become outdated, then min_log_num will be correspondingly increased, but the new records in manifest will not be copied into the checkpoint because the manifest's size is determined before them, then the newly outdated WALs will still exist in the checkpoint's manifest, but they are not linked/copied to the checkpoint because their log number is < min_log_num, so a corruption of missing WAL will be reported when restoring from the checkpoint.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7836
Test Plan: make crash_test
Reviewed By: ajkr
Differential Revision: D25788204
Pulled By: cheng-chang
fbshipit-source-id: a4e5acf30f08270b3c0a95304ff559a9e655252f
Summary:
This PR does the following:
-> Creates a WinFileSystem class. This class is the Windows equivalent of the PosixFileSystem and will be used on Windows systems.
-> Introduces a CustomEnv class. A CustomEnv is an Env that takes a FileSystem as constructor argument. I believe there will only ever be two implementations of this class (PosixEnv and WinEnv). There is still a CustomEnvWrapper class that takes an Env and a FileSystem and wraps the Env calls with the input Env but uses the FileSystem for the FileSystem calls
-> Eliminates the public uses of the LegacyFileSystemWrapper.
With this change in place, there are effectively the following patterns of Env:
- "Base Env classes" (PosixEnv, WinEnv). These classes implement the core Env functions (e.g. Threads) and have a hard-coded input FileSystem. These classes inherit from CompositeEnv, implement the core Env functions (threads) and delegate the FileSystem-like calls to the input file system.
- Wrapped Composite Env classes (MemEnv). These classes take in an Env and a FileSystem. The core env functions are re-directed to the wrapped env. The file system calls are redirected to the input file system
- Legacy Wrapped Env classes. These classes take in an Env input (but no FileSystem). The core env functions are re-directed to the wrapped env. A "Legacy File System" is created using this env and the file system calls directed to the env itself.
With these changes in place, the PosixEnv becomes a singleton -- there is only ever one created. Any other use of the PosixEnv is via another wrapped env. This cleans up some of the issues with the env construction and destruction.
Additionally, there were places in the code that required had an Env when they required a FileSystem. Many of these places would wrap the Env with a LegacyFileSystemWrapper instead of using the env->GetFileSystem(). These places were changed, thereby removing layers of additional redirection (LegacyFileSystem --> Env --> Env::FileSystem).
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7703
Reviewed By: zhichao-cao
Differential Revision: D25762190
Pulled By: anand1976
fbshipit-source-id: 1a088e97fc916f28ac69c149cd1dcad0ab31704b
Summary:
Change the StringEnv and related classes to be based on FileSystem APIs rather than the corresponding Env ones. The StringSink and StringSource classes were changed to be based on the corresponding FS file classes.
Part of a cleanup to use the newer interfaces. This change also eliminates some of the casts/wrappers to LegacyFile classes.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7786
Reviewed By: jay-zhuang
Differential Revision: D25761460
Pulled By: anand1976
fbshipit-source-id: 428ae8e32b3db97dbeeca08c9d3bb0d9d4d3a38f
Summary:
1. Made `WriteBatchWithIndexInternal` into a class that stores the `DB*` or `DBOptions*`.
2. Changed the `GetFromBatch` method to be non-static and use an instance of the class. Added `MergeKey` methods to perform the merge itself and return any status.
This change unifies the multiple calls to the `MergeHelper` under a single wrapped API.
Closes https://github.com/facebook/rocksdb/issues/6683
Pull Request resolved: https://github.com/facebook/rocksdb/pull/6851
Reviewed By: ajkr
Differential Revision: D21706574
Pulled By: pdillinger
fbshipit-source-id: 6860bd64d62669aaa591846e914eed3b674e68b1
Summary:
BasicLockEscalation will cause false-positive warnings under TSAN (this is a known issue in TSAN, see details in https://gist.github.com/spetrunia/77274cf2d5848e0a7e090d622695ed4e), skip this test if TSAN is enabled, or if we are not sure whether TSAN is enabled.
Pull Request resolved: https://github.com/facebook/rocksdb/pull/7814
Test Plan: watch the tsan contrun test to pass.
Reviewed By: zhichao-cao
Differential Revision: D25708094
Pulled By: cheng-chang
fbshipit-source-id: 4fc813ff373301d033d086154cc7bb60a5e95889
