Summary:
Define CompressedFileMetaData that just contains fd, smallest_slice, largest_slice. Create compressed_levels_ in Version, the space is allocated using arena
Thus increase the file meta data locality, speed up "Get" and "FindFile"
benchmark with in-memory tmpfs, could have 4% improvement under "random read" and 2% improvement under "read while writing"
benchmark command:
./db_bench --db=/mnt/db/rocksdb --num_levels=6 --key_size=20 --prefix_size=20 --keys_per_prefix=0 --value_size=100 --block_size=4096 --cache_size=17179869184 --cache_numshardbits=6 --compression_type=none --compression_ratio=1 --min_level_to_compress=-1 --disable_seek_compaction=1 --hard_rate_limit=2 --write_buffer_size=134217728 --max_write_buffer_number=2 --level0_file_num_compaction_trigger=8 --target_file_size_base=33554432 --max_bytes_for_level_base=1073741824 --disable_wal=0 --sync=0 --disable_data_sync=1 --verify_checksum=1 --delete_obsolete_files_period_micros=314572800 --max_grandparent_overlap_factor=10 --max_background_compactions=4 --max_background_flushes=0 --level0_slowdown_writes_trigger=16 --level0_stop_writes_trigger=24 --statistics=0 --stats_per_interval=0 --stats_interval=1048576 --histogram=0 --use_plain_table=1 --open_files=-1 --mmap_read=1 --mmap_write=0 --memtablerep=prefix_hash --bloom_bits=10 --bloom_locality=1 --perf_level=0 --benchmarks=readwhilewriting,readwhilewriting,readwhilewriting --use_existing_db=1 --num=52428800 --threads=1 —writes_per_second=81920
Read Random:
From 1.8363 ms/op, improve to 1.7587 ms/op.
Read while writing:
From 2.985 ms/op, improve to 2.924 ms/op.
Test Plan:
make all check
Reviewers: ljin, haobo, yhchiang, sdong
Reviewed By: sdong
Subscribers: dhruba, igor
Differential Revision: https://reviews.facebook.net/D19419
Summary:
This patch include two fixes:
1. newly created Version will now takes the aggregated stats for average-value-size from the latest Version.
2. compensated size of a file is now computed only for newly created / loaded file, this addresses the issue where files are already sorted by their compensated file size but might sometimes observe some out-of-order due to later update on compensated file size.
Test Plan:
export ROCKSDB_TESTS=CompactionDele
./db_test
Reviewers: ljin, igor, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19557
Summary:
In this patch, we allow RocksDB to support multiple DB paths internally.
No user interface is supported yet so this patch is silent to users.
Test Plan: make all check
Reviewers: igor, haobo, ljin, yhchiang
Reviewed By: yhchiang
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18921
Summary: files_by_size_ is sorted by time in case of universal compaction. However, Version::files_ is also sorted by time. So no need for files_by_size_
Test Plan:
1) make check with the change
2) make check with `assert(last_index == c->input_version_->files_[level].size() - 1);` in compaction picker
Reviewers: dhruba, haobo, yhchiang, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19125
Summary:
This diff allows compaction to reclaim storage more effectively.
In the current design, compactions are mainly triggered based on
the file sizes. However, since deletion entries does not have
value, files which have many deletion entries are less likely
to be compacted. As a result, it may took a while to make
deletion entries to be compacted.
This diff address issue by compensating the size of deletion
entries during compaction process: the size of each deletion
entry in the compaction process is augmented by 2x average
value size. The diff applies to both leveled and universal
compacitons.
Test Plan:
develop CompactionDeletionTrigger
make db_test
./db_test
Reviewers: haobo, igor, ljin, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19029
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary:
We decided that one of the long term goals is to unify level and universal compaction.
As a small first step, I'm unifying level 0 sorting methods.
Previously, we used to sort level 0 files in level compaction by file number and in universal compaction by sequence number.
But it turns out that in level compaction, sorting by file number is exactly the same as sorting by sequence number.
Test Plan:
Ran make check with bunch of asserts to verify the sorting order is exactly the same.
Also, make check with this patch
Reviewers: haobo, yhchiang, ljin, dhruba, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19131
Summary:
We added multiple fields to FileMetaData recently and are planning to add more.
This refactoring separate the minimum information for accessing the file. This object is copyable (FileMetaData is not copyable since the ref counter). I hope this refactoring can enable further improvements:
(1) use it to design a more efficient data structure to speed up read queries.
(2) in the future, when we add information of storage level, we can easily do the encoding, instead of enlarge this structure, which might expand memory work set for file meta data.
The definition is same as current EncodedFileMetaData used in two level iterator, so now the logic in two level iterator is easier to understand.
Test Plan: make all check
Reviewers: haobo, igor, ljin
Reviewed By: ljin
Subscribers: leveldb, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D18933
Summary:
https://reviews.facebook.net/D17205 removed the logic of skipping file key range check when there are less than 3 level 0 files. This patch brings it back.
Other than that, add another small optimization to avoid to check all the levels if most higher levels don't have any file.
Test Plan: make all check
Reviewers: ljin
Reviewed By: ljin
Subscribers: yhchiang, igor, haobo, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D19035
Summary: as title
Test Plan:
db_bench
the initial result is very promising. I will post results of complete
runs
Reviewers: dhruba, haobo, sdong, igor
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D18867
Summary:
In this patch, try to allocate the whole iterator tree starting from DBIter from an arena
1. ArenaWrappedDBIter is created when serves as the entry point of an iterator tree, with an arena in it.
2. Add an option to create iterator from arena for following iterators: DBIter, MergingIterator, MemtableIterator, all mem table's iterators, all table reader's iterators and two level iterator.
3. MergeIteratorBuilder is created to incrementally build the tree of internal iterators. It is passed to mem table list and version set and add iterators to it.
Limitations:
(1) Only DB::NewIterator() without tailing uses the arena. Other cases, including readonly DB and compactions are still from malloc
(2) Two level iterator itself is allocated in arena, but not iterators inside it.
Test Plan: make all check
Reviewers: ljin, haobo
Reviewed By: haobo
Subscribers: leveldb, dhruba, yhchiang, igor
Differential Revision: https://reviews.facebook.net/D18513
Summary:
Introducing new compaction style -- FIFO.
FIFO compaction style has write amplification of 1 (+1 for WAL) and it deletes the oldest files when the total DB size exceeds pre-configured values.
FIFO compaction style is suited for storing high-frequency event logs.
Test Plan: Added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
Subscribers: alberts, leveldb
Differential Revision: https://reviews.facebook.net/D18765
Summary: Cleaned up compaction logging a little bit. Now file sizes are easier to read. Also, removed the trailing space.
Test Plan:
verified that i'm happy with logging output:
files_size[#33(seq=101,sz=98KB,0) #31(seq=81,sz=159KB,0) #26(seq=0,sz=637KB,0)]
Reviewers: sdong, haobo, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18549
Summary: One of our users reported current file corruption. The machine was rebooted during the time. This is the only think I can think of which could cause current file corruption. Just add this paranoid check.
Test Plan: make all check
Reviewers: haobo, igor
Reviewed By: haobo
CC: yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D18495
Summary:
As a follow-up diff for https://reviews.facebook.net/D17805, add
optimization to check PrefixMayMatch on Seek()
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17853
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary:
Now that we have column families involved, we need to add extra context to every log message. They now start with "[column family name] log message"
Also added some logging that I think would be useful, like level summary after every flush (I often needed that when going through the logs).
Test Plan: make check + ran db_bench to confirm I'm happy with log output
Reviewers: dhruba, haobo, ljin, yhchiang, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18303
Summary:
The file tree structure in Version is prebuilt and the range of each file is known.
On the Get() code path, we do binary search in FindFile() by comparing
target key with each file's largest key and also check the range for each L0 file.
With some pre-calculated knowledge, each key comparision that has been done can serve
as a hint to narrow down further searches:
(1) If a key falls within a L0 file's range, we can safely skip the next
file if its range does not overlap with the current one.
(2) If a key falls within a file's range in level L0 - Ln-1, we should only
need to binary search in the next level for files that overlap with the current one.
(1) will be able to skip some files depending one the key distribution.
(2) can greatly reduce the range of binary search, especially for bottom
levels, given that one file most likely only overlaps with N files from
the level below (where N is max_bytes_for_level_multiplier). So on level
L, we will only look at ~N files instead of N^L files.
Some inital results: measured with 500M key DB, when write is light (10k/s = 1.2M/s), this
improves QPS ~7% on top of blocked bloom. When write is heavier (80k/s =
9.6M/s), it gives us ~13% improvement.
Test Plan: make all check
Reviewers: haobo, igor, dhruba, sdong, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17205
Summary:
D17961 has two bugs:
(1) two level iterator fails to populate FileMetaData.table_reader, causing performance regression.
(2) table cache handle the !status.ok() case in the wrong place, causing seg fault which shouldn't happen.
Test Plan: make all check
Reviewers: ljin, igor, haobo
Reviewed By: ljin
CC: yhchiang, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D17991
Summary:
One of our profilings shows that Version::Get() sometimes is slow when getting pointer of user comparators or other global objects. In this patch:
(1) we keep pointers of immutable objects in Version to avoid accesses them though option objects or cfd objects
(2) table_reader is directly cached in FileMetaData so that table cache don't have to go through handle first to fetch it
(3) If level 0 has less than 3 files, skip the filtering logic based on SST tables' key range. Smallest and largest key are stored in separated memory locations, which has potential cache misses
Test Plan: make all check
Reviewers: haobo, ljin
Reviewed By: haobo
CC: igor, yhchiang, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D17739
Summary:
Introducing RocksDBLite! Removes all the non-essential features and reduces the binary size. This effort should help our adoption on mobile.
Binary size when compiling for IOS (`TARGET_OS=IOS m static_lib`) is down to 9MB from 15MB (without stripping)
Test Plan: compiles :)
Reviewers: dhruba, haobo, ljin, sdong, yhchiang
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17835
Summary:
With multiple column families, especially when manual Flush is executed, we might roll the log file, although the current log file is empty (no data has been written to the log).
After the diff, we won't create new log file if current is empty.
Next, I will write an algorithm that will flush column families that reference old log files (i.e., that weren't flushed in a while)
Test Plan: Added an unit test. Confirmed that unit test failes in master
Reviewers: dhruba, haobo, ljin, sdong
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17631
Summary: When opening DB in read-only mode, client can choose to only specify a subset of column families ("default" column family can't be omitted, though)
Test Plan: added a unit test in column_family_test
Reviewers: haobo, sdong, ljin, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17565
Summary: It is a regression valgrind bug caused by using FileMetaData as index block handle. One of the fields of FileMetaData is not initialized after being contructed and copied, but I'm not able to find which one. Also, I realized that it's not a good idea to use FileMetaData as in TwoLevelIterator::InitDataBlock(), a copied FileMetaData can be compared with the one in version set byte by byte, but the refs can be changed. Also comparing such a large structure is slightly more expensive. Use a simpler structure instead
Test Plan:
Run the failing valgrind test (Harness.RandomizedLongDB)
make all check
Reviewers: igor, haobo, ljin
Reviewed By: igor
CC: yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D17409
Summary: Talked to <insert internal project name> folks and they found it really scary that they won't be able to roll back once they upgrade to 2.8. We should fix this.
Test Plan: make check
Reviewers: haobo, ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17343
Summary:
Previously, we used to sort all files by BySmallestFirst comparator and then re-sort level0 files in the Finalize() (recently moved to end of SaveTo).
In this diff, I chose the correct comparator at the beginning and sort the files correctly in Builder::SaveTo.
I also added a verification that all files are sorted correctly in CheckConsistency()
NOTE: This diff depends on D17037
Test Plan: make check. Will also run db_stress
Reviewers: dhruba, haobo, sdong, ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17049
Summary: We don't preallocate MANIFEST file, even though we have an option for that. This diff preallocates manifest file every time we create it
Test Plan: make check
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17163
Summary:
This is the part that was not finished when doing the Options.max_num_files=-1 feature. For iterating non level0 SST files (which was done using two level iterator), table cache is not bypassed. With this patch, the leftover feature is done.
Test Plan: make all check; change Options.max_num_files=-1 in one of the tests to cover the codes.
Reviewers: haobo, igor, dhruba, ljin, yhchiang
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17001
Summary:
* PartialMerge api now takes a list of operands instead of two operands.
* Add min_pertial_merge_operands to Options, indicating the minimum
number of operands to trigger partial merge.
* This diff is based on Schalk's previous diff (D14601), but it also
includes necessary changes such as updating the pure C api for
partial merge.
Test Plan:
* make check all
* develop tests for cases where partial merge takes more than two
operands.
TODOs (from Schalk):
* Add test with min_partial_merge_operands > 2.
* Perform benchmarks to measure the performance improvements (can probably
use results of task #2837810.)
* Add description of problem to doc/index.html.
* Change wiki pages to reflect the interface changes.
Reviewers: haobo, igor, vamsi
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16815
Summary:
As it turns out, we need the call to ComputeCompactionScore (previously: Finalize) in CompactionPicker.
The issue caused a deadlock in db_stress: http://ci-builds.fb.com/job/rocksdb_crashtest/290/console
The last two lines before a deadlock were:
2014/03/18-22:43:41.481029 7facafbee700 (Original Log Time 2014/03/18-22:43:41.480989) Compaction nothing to do
2014/03/18-22:43:41.481041 7faccf7fc700 wait for fewer level0 files...
"Compaction nothing to do" and other thread waiting for fewer level0 files. Hm hm.
I moved the pre-sorting to SaveTo, which should fix both the original and the new issue.
Test Plan: make check for now, will run db_stress in jenkins
Reviewers: dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17037
Summary:
This is a 500ns operation while the whole Get() call takes only a few
micro!
Test Plan: ran db_bench, for a DB with 50M keys, QPS jumps from 5.2M/s to 7.2M/s
Reviewers: haobo, igor, dhruba
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17007
Summary:
Finalize re-sorts (read: mutates) the files_ in Version* and it is called by CompactionPicker during normal runtime. At the same time, this same Version* lives in the SuperVersion* and is accessed without the mutex in GetImpl() code path.
Mutating the files_ in one thread and reading the same files_ in another thread is a bad idea. It caused this issue: http://ci-builds.fb.com/job/rocksdb_crashtest/285/console
Long-term, we need to be more careful with method contracts and clearly document what state can be mutated when. Now that we are much faster because we don't lock in GetImpl(), we keep running into data races that were not a problem before when we were slower. db_stress has been very helpful in detecting those.
Short-term, I removed Finalize() from CompactionPicker.
Note: I believe this is an issue in current 2.7 version running in production.
Test Plan:
make check
Will also run db_stress to see if issue is gone
Reviewers: sdong, ljin, dhruba, haobo
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16983
Summary:
There is a chance that an old MANIFEST is corrupted in 2.7 but just not noticed.
This check would fail them. Change it to log instead of returning a
Corruption status.
Test Plan: make
Reviewers: haobo, igor
Reviewed By: igor
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16923
Summary:
Based on my recent findings (posted in our internal group), if we use fallocate without KEEP_SIZE flag, we get superior performance of fdatasync() in append-only workloads.
This diff provides an option for user to not use KEEP_SIZE flag, thus optimizing his sync performance by up to 2x-3x.
At one point we also just called posix_fallocate instead of fallocate, which isn't very fast: http://code.woboq.org/userspace/glibc/sysdeps/posix/posix_fallocate.c.html (tl;dr it manually writes out zero bytes to allocate storage). This diff also fixes that, by first calling fallocate and then posix_fallocate if fallocate is not supported.
Test Plan: make check
Reviewers: dhruba, sdong, haobo, ljin
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16761
Summary:
When the manifest is getting rolled the following happens:
1) manifest_file_number_ is assigned to a new manifest number (even though the old one is still current)
2) mutex is unlocked
3) SetCurrentFile() creates temporary file manifest_file_number_.dbtmp
4) SetCurrentFile() renames manifest_file_number_.dbtmp to CURRENT
5) mutex is locked
If FindObsoleteFiles happens between (3) and (4) it will:
1) Delete manifest_file_number_.dbtmp (because it's not in pending_outputs_)
2) Delete old manifest (because the manifest_file_number_ already points to a new one)
I introduce the concept of prev_manifest_file_number_ that will avoid the race condition.
However, we should discuss the future of MANIFEST file rolling. We found some race conditions with it last week and who knows how many more are there. Nobody is using it in production because we don't trust the implementation. Should we even support it?
Test Plan: make check
Reviewers: ljin, dhruba, haobo, sdong
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16929
Summary:
In the last fix, I forgot to point to the writer when comparing edit,
which is apparently not correct.
Test Plan: still running make whitebox_crash_test
Reviewers: igor, haobo, igor2
Reviewed By: igor2
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16911
