Summary: Remember whole key or prefix filtering on/off in SST files. If user opens the DB with a different setting that cannot be satisfied while reading the SST file, ignore the bloom filter.
Test Plan: Add a unit test for it
Reviewers: yhchiang, igor, rven
Reviewed By: rven
Subscribers: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D32889
Summary:
Get() now doesn't make use of bloom filter if it is prefix based. Add the check.
Didn't touch block based bloom filter. I can't fully reason whether it is correct to do that. But it's straight-forward to for full bloom filter.
Test Plan:
make all check
Add a test case in DBTest
Reviewers: rven, yhchiang, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D31941
Summary: Add CappedFixTransform, which is the same as fixed length prefix extractor, except that when slice is shorter than the fixed length, it will use the full key.
Test Plan:
Add a test case for
db_test
options_test
and a new test
Reviewers: yhchiang, rven, igor
Reviewed By: igor
Subscribers: MarkCallaghan, leveldb, dhruba, yoshinorim
Differential Revision: https://reviews.facebook.net/D31887
Summary: This was a feature request by osquery. See task t5617758
Test Plan: compiles and memenv_test runs
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D32115
Summary:
This diff adds BlockBasedTable format_version = 2. New format version brings better compressed block format for these compressions:
1) Zlib -- encode decompressed size in compressed block header
2) BZip2 -- encode decompressed size in compressed block header
3) LZ4 and LZ4HC -- instead of doing memcpy of size_t encode size as varint32. memcpy is very bad because the DB is not portable accross big/little endian machines or even platforms where size_t might be 8 or 4 bytes.
It does not affect format for snappy.
If you write a new database with format_version = 2, it will not be readable by RocksDB versions before 3.10. DB::Open() will return corruption in that case.
Test Plan:
Added a new test in db_test.
I will also run db_bench and verify VSIZE when block_cache == 1GB
Reviewers: yhchiang, rven, MarkCallaghan, dhruba, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D31461
Summary:
Since https://reviews.facebook.net/D16119, we ignore partial tailing writes. Because of that, we no longer need skip_log_error_on_recovery.
The documentation says "Skip log corruption error on recovery (If client is ok with losing most recent changes)", while the option actually ignores any corruption of the WAL (not only just the most recent changes). This is very dangerous and can lead to DB inconsistencies. This was originally set up to ignore partial tailing writes, which we now do automatically (after D16119). I have digged up old task t2416297 which confirms my findings.
Test Plan: There was actually no tests that verified correct behavior of skip_log_error_on_recovery.
Reviewers: yhchiang, rven, dhruba, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30603
Summary:
Add support to allow nested config for block-based table factory. The format looks like this:
"write_buffer_size=1024;block_based_table_factory={block_size=4k};max_write_buffer_num=2"
Test Plan: unit test
Reviewers: yhchiang, rven, igor, ljin, jonahcohen
Reviewed By: jonahcohen
Subscribers: jonahcohen, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29223
Summary:
There are two versions of FindObsoleteFiles():
* full scan, which is executed every 6 hours (and it's terribly slow)
* no full scan, which is executed every time a background process finishes and iterator is deleted
This diff is optimizing the second case (no full scan). Here's what we do before the diff:
* Get the list of obsolete files (files with ref==0). Some files in obsolete_files set might actually be live.
* Get the list of live files to avoid deleting files that are live.
* Delete files that are in obsolete_files and not in live_files.
After this diff:
* The only files with ref==0 that are still live are files that have been part of move compaction. Don't include moved files in obsolete_files.
* Get the list of obsolete files (which exclude moved files).
* No need to get the list of live files, since all files in obsolete_files need to be deleted.
I'll post the benchmark results, but you can get the feel of it here: https://reviews.facebook.net/D30123
This depends on D30123.
P.S. We should do full scan only in failure scenarios, not every 6 hours. I'll do this in a follow-up diff.
Test Plan:
One new unit test. Made sure that unit test fails if we don't have a `if (!f->moved)` safeguard in ~Version.
make check
Big number of compactions and flushes:
./db_stress --threads=30 --ops_per_thread=20000000 --max_key=10000 --column_families=20 --clear_column_family_one_in=10000000 --verify_before_write=0 --reopen=15 --max_background_compactions=10 --max_background_flushes=10 --db=/fast-rocksdb-tmp/db_stress --prefixpercent=0 --iterpercent=0 --writepercent=75 --db_write_buffer_size=2000000
Reviewers: yhchiang, rven, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30249
Summary:
We now release the mutex before copying the files in the case
of the trivial move. This path does not use the compaction job.
Test Plan: DBTest.LevelCompactionThirdPath
Reviewers: yhchiang, igor, sdong
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30381
Summary:
Allow Level-style compaction to place files in different paths
This diff provides the code for task 4854591. We now support level-compaction
to place files in different paths by specifying them in db_paths along with
the minimum level for files to store in that path.
Test Plan: ManualLevelCompactionOutputPathId in db_test.cc
Reviewers: yhchiang, MarkCallaghan, dhruba, yoshinorim, sdong
Reviewed By: sdong
Subscribers: yoshinorim, dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D29799
Summary:
This diff changes compile to optimize for native platform by default. This will automatically turn on crc32 optimizations for modern processors, which greatly improves rocksdb's performance.
I also did some more changes to compilation documentation.
Test Plan:
compile with `make`, observe -march=native
compile with `PORTABLE=1 make`, observe no -march=native
Reviewers: sdong, rven, yhchiang, MarkCallaghan
Reviewed By: MarkCallaghan
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D30225
Summary:
Currently, blocks which have more than one reference (ie referenced by something other than cache itself) are evicted from cache. This doesn't make much sense:
- blocks are still in RAM, so the RAM usage reported by the cache is incorrect
- if the same block is needed by another iterator, it will be loaded and decompressed again
This diff changes the reference counting scheme a bit. Previously, if the cache contained the block, this was accounted for in its refcount. After this change, the refcount is only used to track external references. There is a boolean flag which indicates whether or not the block is contained in the cache.
This diff also changes how LRU list is used. Previously, both hashtable and the LRU list contained all blocks. After this change, the LRU list contains blocks with the refcount==0, ie those which can be evicted from the cache.
Note that this change still allows for cache to grow beyond its capacity. This happens when all blocks are pinned (ie refcount>0). This is consistent with the current behavior. The cache's insert function never fails. I spent lots of time trying to make table_reader and other places work with the insert which might failed. It turned out to be pretty hard. It might really destabilize some customers, so finally, I decided against doing this.
table_cache_remove_scan_count_limit option will be unneeded after this change, but I will remove it in the following diff, if this one gets approved
Test Plan: Ran tests, made sure they pass
Reviewers: sdong, ljin
Differential Revision: https://reviews.facebook.net/D25503
Summary:
Introduces a new class for managing write buffer memory across column
families. We supplement ColumnFamilyOptions::write_buffer_size with
ColumnFamilyOptions::write_buffer, a shared pointer to a WriteBuffer
instance that enforces memory limits before flushing out to disk.
Test Plan: Added SharedWriteBuffer unit test to db_test.cc
Reviewers: sdong, rven, ljin, igor
Reviewed By: igor
Subscribers: tnovak, yhchiang, dhruba, xjin, MarkCallaghan, yoshinorim
Differential Revision: https://reviews.facebook.net/D22581
Summary:
Add GetThreadList API, which allows developer to track the
status of each process. Currently, calling GetThreadList will
only get the list of background threads in RocksDB with their
thread-id and thread-type (priority) set. Will add more support
on this in the later diffs.
ThreadStatus currently has the following properties:
// An unique ID for the thread.
const uint64_t thread_id;
// The type of the thread, it could be ROCKSDB_HIGH_PRIORITY,
// ROCKSDB_LOW_PRIORITY, and USER_THREAD
const ThreadType thread_type;
// The name of the DB instance where the thread is currently
// involved with. It would be set to empty string if the thread
// does not involve in any DB operation.
const std::string db_name;
// The name of the column family where the thread is currently
// It would be set to empty string if the thread does not involve
// in any column family.
const std::string cf_name;
// The event that the current thread is involved.
// It would be set to empty string if the information about event
// is not currently available.
Test Plan:
./thread_list_test
export ROCKSDB_TESTS=GetThreadList
./db_test
Reviewers: rven, igor, sdong, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D25047
Summary:
Improve the backup engine by not deleting the corrupted
backup when it is detected; instead leaving it to the client
to delete the corrupted backup.
Also add a BackupEngine::Open() call.
Test Plan:
Add check to CorruptionTest inside backupable_db_test
to check that the corrupt backups are not deleted. The previous
version of the code failed this test as backups were deleted,
but after the changes in this commit, this test passes.
Run make check to ensure that no other tests fail.
Reviewers: sdong, benj, sanketh, sumeet, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D28521
Summary:
With the patch, thread pool size will be automatically increased if DB's options ask for more parallelism of compactions or flushes.
Too many users have been confused by the API. Change it to make it harder for users to make mistakes
Test Plan: Add two unit tests to cover the function.
Reviewers: yhchiang, rven, igor, MarkCallaghan, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D27555
Summary: With a new option, when accepting a new key, WriteBatchWithIndex will find an existing index of the same key, and replace the content of it.
Test Plan: Add a unit test case.
Reviewers: ljin, yhchiang, rven, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D24753
Summary: Allow accepting Options as a string of key/value pairs
Test Plan: unit test
Reviewers: yhchiang, sdong, igor
Reviewed By: igor
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D24597
Summary: It contrains the file size to be 4G max with int
Test Plan:
tried to grep instance and made sure other related variables are also
uint64
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23697
Summary:
MurmurHash becomes expensive when we do millions Get() a second in one
thread. Add this option to allow the first hash function to use identity
function as hash function. It results in QPS increase from 3.7M/s to
~4.3M/s. I did not observe improvement for end to end RocksDB
performance. This may be caused by other bottlenecks that I will address
in a separate diff.
Test Plan:
```
[ljin@dev1964 rocksdb] ./cuckoo_table_reader_test --enable_perf --file_dir=/dev/shm --write --identity_as_first_hash=0
==== Test CuckooReaderTest.WhenKeyExists
==== Test CuckooReaderTest.WhenKeyExistsWithUint64Comparator
==== Test CuckooReaderTest.CheckIterator
==== Test CuckooReaderTest.CheckIteratorUint64
==== Test CuckooReaderTest.WhenKeyNotFound
==== Test CuckooReaderTest.TestReadPerformance
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.272us (3.7 Mqps) with batch size of 0, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.138us (7.2 Mqps) with batch size of 10, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.142us (7.1 Mqps) with batch size of 25, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.142us (7.0 Mqps) with batch size of 50, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.144us (6.9 Mqps) with batch size of 100, # of found keys 125829120
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.201us (5.0 Mqps) with batch size of 0, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.121us (8.3 Mqps) with batch size of 10, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.123us (8.1 Mqps) with batch size of 25, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.121us (8.3 Mqps) with batch size of 50, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.112us (8.9 Mqps) with batch size of 100, # of found keys 104857600
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.251us (4.0 Mqps) with batch size of 0, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.107us (9.4 Mqps) with batch size of 10, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.099us (10.1 Mqps) with batch size of 25, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.100us (10.0 Mqps) with batch size of 50, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.116us (8.6 Mqps) with batch size of 100, # of found keys 83886080
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.189us (5.3 Mqps) with batch size of 0, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.095us (10.5 Mqps) with batch size of 10, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.096us (10.4 Mqps) with batch size of 25, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.098us (10.2 Mqps) with batch size of 50, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.105us (9.5 Mqps) with batch size of 100, # of found keys 73400320
[ljin@dev1964 rocksdb] ./cuckoo_table_reader_test --enable_perf --file_dir=/dev/shm --write --identity_as_first_hash=1
==== Test CuckooReaderTest.WhenKeyExists
==== Test CuckooReaderTest.WhenKeyExistsWithUint64Comparator
==== Test CuckooReaderTest.CheckIterator
==== Test CuckooReaderTest.CheckIteratorUint64
==== Test CuckooReaderTest.WhenKeyNotFound
==== Test CuckooReaderTest.TestReadPerformance
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.230us (4.3 Mqps) with batch size of 0, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.086us (11.7 Mqps) with batch size of 10, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.088us (11.3 Mqps) with batch size of 25, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.083us (12.1 Mqps) with batch size of 50, # of found keys 125829120
With 125829120 items, utilization is 93.75%, number of hash functions: 2.
Time taken per op is 0.083us (12.1 Mqps) with batch size of 100, # of found keys 125829120
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.159us (6.3 Mqps) with batch size of 0, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 10, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.080us (12.6 Mqps) with batch size of 25, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.080us (12.5 Mqps) with batch size of 50, # of found keys 104857600
With 104857600 items, utilization is 78.12%, number of hash functions: 2.
Time taken per op is 0.082us (12.2 Mqps) with batch size of 100, # of found keys 104857600
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.154us (6.5 Mqps) with batch size of 0, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.077us (13.0 Mqps) with batch size of 10, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.077us (12.9 Mqps) with batch size of 25, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 50, # of found keys 83886080
With 83886080 items, utilization is 62.50%, number of hash functions: 2.
Time taken per op is 0.079us (12.6 Mqps) with batch size of 100, # of found keys 83886080
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.218us (4.6 Mqps) with batch size of 0, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.083us (12.0 Mqps) with batch size of 10, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.085us (11.7 Mqps) with batch size of 25, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.086us (11.6 Mqps) with batch size of 50, # of found keys 73400320
With 73400320 items, utilization is 54.69%, number of hash functions: 2.
Time taken per op is 0.078us (12.8 Mqps) with batch size of 100, # of found keys 73400320
```
Reviewers: sdong, igor, yhchiang
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D23451
Summary:
The compilers we use treat char as signed. However, this is not guarantee of C standard and some compilers (for ARM platform for example), treat char as unsigned. Code that assumes that char is either signed or unsigned is wrong.
This change explicitly casts the char to signed version. This will not break any of our use cases on x86, which, I believe are all of them. In case somebody out there is using RocksDB on ARM AND using bloom filters, they're going to have a bad time. However, it is very unlikely that this is the case.
Test Plan: sanity test with previous commit (with new sanity test)
Reviewers: yhchiang, ljin, sdong
Reviewed By: ljin
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D22767
Summary:
Introducing WriteController, which is a source of truth about per-DB write delays. Let's define an DB epoch as a period where there are no flushes and compactions (i.e. new epoch is started when flush or compaction finishes). Each epoch can either:
* proceed with all writes without delay
* delay all writes by fixed time
* stop all writes
The three modes are recomputed at each epoch change (flush, compaction), rather than on every write (which is currently the case).
When we have a lot of column families, our current pull behavior adds a big overhead, since we need to loop over every column family for every write. With new push model, overhead on Write code-path is minimal.
This is just the start. Next step is to also take care of stalls introduced by slow memtable flushes. The final goal is to eliminate function MakeRoomForWrite(), which currently needs to be called for every column family by every write.
Test Plan: make check for now. I'll add some unit tests later. Also, perf test.
Reviewers: dhruba, yhchiang, MarkCallaghan, sdong, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22791
Summary:
That way we can see when this graph goes up and be happy.
Couple of changes:
1. title
2. fix db_bench to delete column families before deleting the DB. this was asserting when compiled in debug mode
3. don't sync manifest when disableDataSync. We discussed this offline. I can move it to separate diff if you'd like
Test Plan: ran it
Reviewers: sdong, yhchiang, ljin
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22815
Summary: as title
Test Plan: no
Reviewers: sdong, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22761
Summary: also fix HISTORY.md
Test Plan: make all check
Reviewers: sdong, yhchiang, igor
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D22437
Summary:
I will move compression related options in a separate diff since this
diff is already pretty lengthy.
I guess I will also need to change JNI accordingly :(
Test Plan: make all check
Reviewers: yhchiang, igor, sdong
Reviewed By: igor
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D21915
Summary:
Add WriteBatchWithIndex so that a user can query data out of a WriteBatch, to support MongoDB's read-its-own-write.
WriteBatchWithIndex uses a skiplist to store the binary index. The index stores the offset of the entry in the write batch. When searching for a key, the key for the entry is read by read the entry from the write batch from the offset.
Define a new iterator class for querying data out of WriteBatchWithIndex. A user can create an iterator of the write batch for one column family, seek to a key and keep calling Next() to see next entries.
I will add more unit tests if people are OK about this API.
Test Plan:
make all check
Add unit tests.
Reviewers: yhchiang, igor, MarkCallaghan, ljin
Reviewed By: ljin
Subscribers: dhruba, leveldb, xjin
Differential Revision: https://reviews.facebook.net/D21381
Summary: I was bit by this when developing SpatialDB. In case all files are at level 0, CompactRange() will output the compacted files to level 0. This is not ideal, since read amp. is much better at level 1 and higher.
Test Plan: Compacted data in SpatialDB, read manifest using ldb, verified that files are now at level 1 instead of 0.
Reviewers: sdong, ljin, yhchiang, dhruba
Reviewed By: dhruba
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20901
Summary: We have quite some properties that are integers and we are adding more. Add a function to directly return them as an integer, instead of a string
Test Plan: Add several unit test checks
Reviewers: yhchiang, igor, dhruba, haobo, ljin
Reviewed By: ljin
Subscribers: yoshinorim, leveldb
Differential Revision: https://reviews.facebook.net/D20637
Summary: Add a DB property of estimated number of live keys, by adding number of entries of all mem tables and all files, subtracted by all deletions in all files.
Test Plan: Add the case in unit tests
Reviewers: hobbymanyp, ljin
Reviewed By: ljin
Subscribers: MarkCallaghan, yoshinorim, leveldb, igor, dhruba
Differential Revision: https://reviews.facebook.net/D20631
Summary:
Make StatisticsImpl being able to forward stats to provided statistics
implementation. The main purpose is to allow us to collect internal
stats in the future even when user supplies custom statistics
implementation. It avoids intrumenting 2 sets of stats collection code.
One immediate use case is tuning advisor, which needs to collect some
internal stats, users may not be interested.
Test Plan:
ran db_bench and see stats show up at the end of run
Will run make all check since some tests rely on statistics
Reviewers: yhchiang, sdong, igor
Reviewed By: sdong
Subscribers: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D20145
Summary:
All public headers need to be under `include/rocksdb` directory. Otherwise, clients include our header files like this:
#include <rocksdb/db.h>
#include <utilities/backupable_db.h> // still our public header!
Also, internally, we include:
#include "utilities/backupable/backupable_db.h" // internal header
#include "utilities/backupable_db.h" // public header
which is confusing.
This way, when we install rocksdb as a system library, we can just copy `include/rocksdb` directory to system's header files. We can't really copy `utilities` directory to system's header files.
Test Plan: compiles
Reviewers: dhruba, ljin, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20409
Summary: Updating HISTORY.md to reflect changes in PlainTable index
Test Plan: no need
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20229
Summary:
Since we have a lot of options for PlainTable, add a struct PlainTableOptions
to manage them
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D20175
Summary:
This patch adds a target size parameter in options.db_paths and universal compaction will base it to determine which DB path to place a new file.
Level-style stays the same.
Test Plan: Add new unit tests
Reviewers: ljin, yhchiang
Reviewed By: yhchiang
Subscribers: MarkCallaghan, dhruba, igor, leveldb
Differential Revision: https://reviews.facebook.net/D19869
Summary:
Seems like NewTotalOrderPlainTableFactory is useless and is semantically incorrect.
Total order mode indicator is prefix_extractor == nullptr,
but NewTotalOrderPlainTableFactory doesn't set it to be nullptr. That's why some tests
in plain_table_db_tests is incorrect.
Test Plan: make all check
Reviewers: sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19587
Summary:
Add option and plugin rate limiter for PosixWritableFile. The rate
limiter only applies to flush and compaction. WAL and MANIFEST are
excluded from this enforcement.
Test Plan: db_test
Reviewers: igor, yhchiang, sdong
Reviewed By: sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19425
Summary: Update HISTORY.md to include TimeOut write API and compaction update.
Test Plan: n/a
Reviewers: ljin, sdong
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19449
Summary:
In this patch, we enhance HashLinkList memtable to reduce performance outliers when a bucket contains too many entries. We switch to skip list for this case to enable binary search.
Add threshold_use_skiplist parameter to determine when a bucket needs to switch to skip list.
The new data structure is documented in comments in the codes.
Test Plan:
make all check
set threshold_use_skiplist in several tests
Reviewers: yhchiang, haobo, ljin
Reviewed By: yhchiang, ljin
Subscribers: nkg-, xjin, dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19299
Summary:
Add one entry to HISTORY.md that is failed to be added.
Move two other ones to the right location.
Test Plan: Only document
Reviewers: haobo, ljin
Subscribers: dhruba, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19233
Summary:
As discussed in our internal group, we don't get much use of seek compaction at the moment, while it's making code more complicated and slower in some cases.
This diff removes seek compaction and (hopefully) all code that was introduced to support seek compaction.
There is one test case that relied on didIO information. I'll try to find another way to implement it.
Test Plan: make check
Reviewers: sdong, haobo, yhchiang, ljin, dhruba
Reviewed By: ljin
Subscribers: leveldb
Differential Revision: https://reviews.facebook.net/D19161
Summary: Add two parameters of hash linked list to log distribution of number of entries across all buckets, and a sample row when there are too many entries in one single bucket.
Test Plan: Turn it on in plain_table_db_test and see the logs.
Reviewers: haobo, ljin
Reviewed By: ljin
Subscribers: leveldb, nkg-, dhruba, yhchiang
Differential Revision: https://reviews.facebook.net/D19095
Summary: The new table factory is used if users want to convert a DB from one table format to the other. A user can use this table to open a DB written using one table format and write new files to another table format.
Test Plan: add a unit test
Reviewers: haobo, igor
Reviewed By: igor
Subscribers: dhruba, ljin, yhchiang, leveldb
Differential Revision: https://reviews.facebook.net/D19017
Summary:
Introducing new compaction style -- FIFO.
FIFO compaction style has write amplification of 1 (+1 for WAL) and it deletes the oldest files when the total DB size exceeds pre-configured values.
FIFO compaction style is suited for storing high-frequency event logs.
Test Plan: Added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
Subscribers: alberts, leveldb
Differential Revision: https://reviews.facebook.net/D18765
Summary:
Materialize the hash index to avoid the soaring cpu/flash usage
when initializing the database.
Test Plan: existing unit tests passed
Reviewers: sdong, haobo
Reviewed By: sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18339
Summary:
This diff addresses task #4296714 and rethinks how users provide us with TablePropertiesCollectors as part of Options.
Here's description of task #4296714:
I'm debugging #4295529 and noticed that our count of user properties kDeletedKeys is wrong. We're sharing one single InternalKeyPropertiesCollector with all Table Builders. In LOG Files, we're outputting number of kDeletedKeys as connected with a single table, while it's actually the total count of deleted keys since creation of the DB.
For example, this table has 3155 entries and 1391828 deleted keys.
The problem with current approach that we call methods on a single TablePropertiesCollector for all the tables we create. Even worse, we could do it from multiple threads at the same time and TablePropertiesCollector has no way of knowing which table we're calling it for.
Good part: Looks like nobody inside Facebook is using Options::table_properties_collectors. This means we should be able to painfully change the API.
In this change, I introduce TablePropertiesCollectorFactory. For every table we create, we call `CreateTablePropertiesCollector`, which creates a TablePropertiesCollector for a single table. We then use it sequentially from a single thread, which means it doesn't have to be thread-safe.
Test Plan:
Added a test in table_properties_collector_test that fails on master (build two tables, assert that kDeletedKeys count is correct for the second one).
Also, all other tests
Reviewers: sdong, dhruba, haobo, kailiu
Reviewed By: kailiu
CC: leveldb
Differential Revision: https://reviews.facebook.net/D18579
Summary:
TLB page allocation errors are now logged to info logs, instead of stderr.
In order to do that, mem table rep's factory functions take a info logger now.
Test Plan: make all check
Reviewers: haobo, igor, yhchiang
Reviewed By: yhchiang
CC: leveldb, yhchiang, dhruba
Differential Revision: https://reviews.facebook.net/D18471
Summary:
also add an override option total_order_iteration if you want to use full
iterator with prefix_extractor
Test Plan: make all check
Reviewers: igor, haobo, sdong, yhchiang
Reviewed By: haobo
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D17805
Summary: XCode for some reason injects `#define DEBUG 1` into our code, which makes compile fail because we use `DEBUG` keyword for other stuff. This diff fixes the issue by renaming `DEBUG` to `DEBUG_LEVEL`.
Test Plan: compiles
Reviewers: dhruba, haobo, sdong, yhchiang, ljin
Reviewed By: yhchiang
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17709
Summary: Update HISTORY.md to make existing items to 2.8 release and add something I think is missing.
Test Plan: N/A
Reviewers: haobo, igor, ljin, dhruba, yhchiang, xjin
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17517
Summary: The previous change D15087 changed existing compaction filter, which makes the commonly used class not backward compatible. Revert the older interface. Use a new interface for V2 instead.
Test Plan: make all check
Reviewers: haobo, yhchiang, igor
CC: danguo, dhruba, ljin, igor, leveldb
Differential Revision: https://reviews.facebook.net/D17223
Summary: Talked to <insert internal project name> folks and they found it really scary that they won't be able to roll back once they upgrade to 2.8. We should fix this.
Test Plan: make check
Reviewers: haobo, ljin
Reviewed By: ljin
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17343
Summary:
This diff adds a new CompactionFilterV2 API that roll up the
decisions of kv pairs during compactions. These kv pairs must share the
same key prefix. They are buffered inside the db.
typedef std::vector<Slice> SliceVector;
virtual std::vector<bool> Filter(int level,
const SliceVector& keys,
const SliceVector& existing_values,
std::vector<std::string>* new_values,
std::vector<bool>* values_changed
) const = 0;
Application can override the Filter() function to operate
on the buffered kv pairs. More details in the inline documentation.
Test Plan:
make check. Added unit tests to make sure Keep, Delete,
Change all works.
Reviewers: haobo
CCs: leveldb
Differential Revision: https://reviews.facebook.net/D15087
Summary:
Everytime a client opens a DB, we do a sanity check that:
* checks the existance of all the necessary files
* verifies that file sizes are correct
Some of the code was stolen from https://reviews.facebook.net/D16935
Test Plan: added a unit test
Reviewers: dhruba, haobo, sdong
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D17097
Summary: Added a function/command to check the consistency of live files' meta data
Test Plan:
Manual test (size mismatch, file not exist).
Command test script.
Reviewers: haobo
Reviewed By: haobo
CC: dhruba, leveldb
Differential Revision: https://reviews.facebook.net/D16935
Summary:
I'm cleaning up some code preparing for the big diff review tomorrow. This is the first part of the cleanup.
Changes are mostly cosmetic. The goal is to decrease amount of code difference between columnfamilies and master branch.
This diff also fixes race condition when dropping column family.
Test Plan: Ran db_stress with variety of parameters
Reviewers: dhruba, haobo
Differential Revision: https://reviews.facebook.net/D16833
Summary: Add a function to Env so that users can query the waiting queue length of each thread pool
Test Plan: add a test in env_test
Reviewers: haobo
Reviewed By: haobo
CC: dhruba, igor, yhchiang, ljin, nkg-, leveldb
Differential Revision: https://reviews.facebook.net/D16755
Summary:
(1) Fix SanitizeOptions() to also check HashLinkList. The current
dynamic case just happens to work because the 2 classes have the same
layout.
(2) Do not delete SliceTransform object in HashSkipListFactory and
HashLinkListFactory destructor. Reason: SanitizeOptions() enforces
prefix_extractor and SliceTransform to be the same object when
Hash**Factory is used. This makes the behavior strange: when
Hash**Factory is used, prefix_extractor will be released by RocksDB. If
other memtable factory is used, prefix_extractor should be released by
user.
Test Plan: db_bench && make asan_check
Reviewers: haobo, igor, sdong
Reviewed By: igor
CC: leveldb, dhruba
Differential Revision: https://reviews.facebook.net/D16587
Summary:
If verify_checksums_in_compaction is true, compaction will verify checksums. This is default.
If it's false, compaction doesn't verify checksums. This is useful for in-memory workloads.
Test Plan: corruption_test
Reviewers: dhruba
Reviewed By: dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16695
Summary:
(1) Report corruption if backup meta file has tailing data that was not read. This should fix: https://github.com/facebook/rocksdb/issues/81 (also, @sdong reported similar issue)
(2) Don't use OS buffer when copying file to backup directory. We don't need the file in cache since we won't be reading it twice
(3) Don't delete newer backups when somebody tries to backup the diverged DB (restore from older backup, add new data, try to backup). Rather, just fail the new backup.
Test Plan: backupable_db_test
Reviewers: ljin, dhruba, sdong
Reviewed By: ljin
CC: leveldb, sdong
Differential Revision: https://reviews.facebook.net/D16287
Summary:
This diff does two things:
(1) Log::Reader does not report a corruption when the last record in a log or manifest file is truncated (meaning that log writer died in the middle of the write). Inherited the code from LevelDB: https://code.google.com/p/leveldb/source/detail?r=269fc6ca9416129248db5ca57050cd5d39d177c8#
(2) Turn off mmap writes for all writes to log and manifest files
(2) is necessary because if we use mmap writes, the last record is not truncated, but is actually filled with zeros, making checksum fail. It is hard to recover from checksum failing.
Test Plan:
Added unit tests from LevelDB
Actually recovered a "corrupted" MANIFEST file.
Reviewers: dhruba, haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16119
Summary:
* Add ColumnFamilyHandle::GetID() function. Client needs to know column family's ID to be able to construct WriteBatch
* Handle WriteBatch::Handler failure gracefully. Since WriteBatch is not a very smart function (it takes raw CF id), client can add data to WriteBatch for column family that doesn't exist. In that case, we need to gracefully return failure status from DB::Write(). To do that, I added a return Status to WriteBatch functions PutCF, DeleteCF and MergeCF.
Test Plan: Added test to column_family_test
Reviewers: dhruba, haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16323
Summary:
This is not a generic thread local implementation in the sense that it
only takes pointer. But it does support multiple instances per thread
and lets user plugin function to perform cleanup when thread exits or an
instance gets destroyed.
Test Plan: unit test for now
Reviewers: haobo, igor, sdong, dhruba
Reviewed By: igor
CC: leveldb, kailiu
Differential Revision: https://reviews.facebook.net/D16131
Summary: Added a bit more information to compaction context, requested by internal team at FB.
Test Plan: Modified CompactionFilter test to make sure is_manual_compaction is properly set.
Reviewers: haobo
Reviewed By: haobo
CC: leveldb
Differential Revision: https://reviews.facebook.net/D16095
Summary:
This is not column-family related diff. It is in columnfamily branch because the change is significant and we want to push it with next major release (3.0).
It removes the leveldb notion of one thread pool and expands it to two thread pools by default (HIGH and LOW). Flush process is removed from compaction process and all flush threads are executed on HIGH thread pool, since we don't want long-running compactions to influence flush latency.
Test Plan: make check
Reviewers: dhruba, haobo, kailiu, sdong
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15987
Summary:
Easy thing goes first. This patch moves arena to internal dir; based
on which, the coming patch will deal with memtable_rep.
Test Plan: make check
Reviewers: haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15615
Summary:
* Add a change log for rocksdb releases.
* Remove the hacky parts of make_new_version.sh, which are either
no longer useful or will be done in our dedicated 3rd-party release
tool.
Test Plan: N/A
Reviewers: igor, haobo, sdong, dhruba
CC: leveldb
Differential Revision: https://reviews.facebook.net/D15543
